Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
15,844 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

1659 Commits

Author SHA1 Message Date
Andrew Tridgell 7b4181dc14 Plane: prepare for 3.1.1 release 2014-09-12 11:07:26 +10:00
Andrew Tridgell 7aad03df28 Plane: minor doc update for fence auto enable 2014-09-11 18:58:54 +10:00
Andrew Tridgell f3d1461d7a Plane: improve the short and long failsafe docs 
thanks to Mark Jacobsen for the analysis!
 2014-09-10 06:56:01 +10:00
Andrew Tridgell bf80a2485f Plane: support acceptance radius for waypoints 2014-09-03 12:38:30 +10:00
Randy Mackay c2cdc0468b Plane: individual accel and gyro status to GCS 2014-09-03 11:22:53 +09:00
Andrew Tridgell 21ed86004a Plane: raise the default WP radius 
with L1 a large radius doesn't mean it turns too early
 2014-08-30 07:43:11 +10:00
Andrew Tridgell 292517b88b Plane: only override takeoff/land flaps if non-zero 2014-08-30 05:16:42 +10:00
Andrew Tridgell 5c96838473 Plane: allow zero throttle in LAND_STAGE_FINAL 2014-08-30 05:15:25 +10:00
Andrew Tridgell 5af4cefff3 Plane: added FLAP_SLEWRATE parameter 
makes for smoother transition of flaps
 2014-08-29 20:31:03 +10:00
Andrew Tridgell f66039c9b4 Plane: added TKOFF_FLAP_PCNT and LAND_FLAP_PERCENT 
easier control of flaps for takeoff and landing
 2014-08-29 20:31:03 +10:00
Andrew Tridgell b94bc0c243 Plane: don't use ground steering until flare in landing 
we need to be able to guide the plane fully in the landing approach
 2014-08-29 20:31:03 +10:00
Andrew Tridgell 988662027e Plane: moved LAND_PITCH_CD into TECS 2014-08-27 20:13:19 +10:00
Andrew Tridgell 186806c768 Plane: lowpass the rangefinder correction, not height 
this should produce less lag as the rangefinder correction should be
changing much less
 2014-08-27 18:25:17 +10:00
Andrew Tridgell 24622030b4 Plane: improved landing glide slope 
we project a point 500m past the landing point to prevent
discontinuites close to the landing point
 2014-08-27 17:14:19 +10:00
Andrew Tridgell a6ee46086c Plane: allow continued use of rangefinder data for 5s after loss of contact 
this allows short outages to be ridden out
 2014-08-27 17:14:19 +10:00
Andrew Tridgell 50f492a69f Plane: added RNGFND_LANDING option 
this allows the use of a rangefinder for landing flare and landing
approach
 2014-08-27 17:14:19 +10:00
Andrew Tridgell b6319a9d19 Plane: keep an estimate of the rangefinder altitude 
only accept data when we have had 10 samples in a row in range at 50Hz
 2014-08-27 17:14:19 +10:00
Andrew Tridgell d0b6676547 Plane: do landing flare if past landing point 
this helps prevent us keeping the throttle on after we've landed if
the baro has drifted enough that we think we are not yet at the flare altitude
 2014-08-27 17:14:19 +10:00
Andrew Tridgell b102c9d19c Plane: use ground steering logic for final stage of auto landing 
this should improve runway tracking
 2014-08-27 17:14:19 +10:00
Andrew Tridgell 5f3ac159ba Plane: start working towards 3.1.1 2014-08-27 17:14:19 +10:00
Andrew Tridgell e880de67ed Plane: prepare for 3.1.0 release 2014-08-26 06:20:37 +10:00
Andrew Tridgell 6e5344bc8d Plane: prepare beta4 2014-08-25 22:20:52 +10:00
Andrew Tridgell cf0741f6fd Plane: don't do failsafe passthru with no RC input 
thanks to Klrill-ka for the suggestion

fixes issue #1302
 2014-08-25 19:45:39 +10:00
Andrew Tridgell 7649907ec2 Plane: run terrain.update() more often 
this provides faster checking of mission waypoints
 2014-08-25 14:55:40 +10:00
Andrew Tridgell daa32f9b62 Plane: reset steering integrator on mode change and when not moving 
this prevents an old integrator from causing problems on takeoff
 2014-08-25 08:20:37 +10:00
Andrew Tridgell f2f730ba9b Plane: added FBWA_TDRAG_CHAN parameter 
this allows for testing taildragger takeoffs in FBWA mode
 2014-08-24 19:39:51 +10:00
Andrew Tridgell 15a7f63d7e Plane: set GPS non-blocking 
the new GPS driver only ever needs a non-blocking port
 2014-08-19 10:08:17 +10:00
Andrew Tridgell 79fa22e4ad Plane: use gcs_send_text_fmt() for SCHED_DEBUG timing 
lets values be saved in mavlink logs
 2014-08-19 10:08:17 +10:00
Andrew Tridgell cf410f8d12 Plane: prepare for 3.1.0-beta3 2014-08-17 18:25:46 +10:00
Andrew Tridgell 1ce3d1d4a4 Plane: update for AFS API change 2014-08-17 18:07:50 +10:00
Andrew Tridgell 9fff67ec89 Plane: update for APM_OBC API change 2014-08-17 09:13:29 +10:00
Randy Mackay c107f1da69 Revert "Plane: use rcmap when sending radio_in to GCS" 
This reverts commit 441f23eed4.
 2014-08-16 20:31:21 +09:00
Randy Mackay 441f23eed4 Plane: use rcmap when sending radio_in to GCS 2014-08-16 15:27:35 +09:00
Randy Mackay 7d7272520e Plane: use baro healthy() 
Use baro last update time in place of healthy to determine whether HIL
sensor updates have started
 2014-08-14 16:03:28 +09:00
Randy Mackay b619c3956c Plane: report baro health to GCS 2014-08-14 16:02:52 +09:00
Andrew Tridgell da7f871e34 Plane: prevent set_target_altitude_proportion() past dest waypoint 
otherwise we could start climbing again on land
 2014-08-14 09:49:52 +10:00
Andrew Tridgell c06067c71b Plane: fixed non-terrain landing 2014-08-14 08:04:06 +10:00
Andrew Tridgell dad95648a0 Plane: split landing code into landing.pde 
this is in preparation for more complex landing code using the
rangefinder
 2014-08-13 21:38:05 +10:00
Andrew Tridgell 7def71d43a Plane: improved landing approach and flare 
flare if we are within the specified time of landing either vertically
or horizontally
 2014-08-13 21:38:05 +10:00
Andrew Tridgell 165993dbf5 Plane: allow steering right through the landing 
this allows a small degree of steering right through the landing,
which makes it possible to have a turn just before landing
 2014-08-13 21:35:26 +10:00
Andrew Tridgell ce9b14f0c8 Plane: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Andrew Tridgell 817164914e Plane: added airspeed simulation in HIL 2014-08-10 18:17:12 +10:00
Andrew Tridgell e6f5a31944 Plane: prepare for 3.1.0-beta2 2014-08-10 07:20:29 +10:00
Andrew Tridgell 0d7d6e1d2a Plane: zero loc structure in HIL_STATE handling 
this avoids av AVR bug in HIL
 2014-08-09 22:50:15 +10:00
Andrew Tridgell 5e997b20f6 Plane: move battery init to after parameter load 2014-08-09 22:50:14 +10:00
Andrew Tridgell 74fc7fbea5 Plane: added 2nd battery monitoring support 2014-08-09 22:50:14 +10:00
Andrew Tridgell e22ab50b16 Plane: fixed build warning 2014-08-08 13:54:21 +10:00
Andrew Tridgell 4f57467aa5 Plane: build AFS (formerly known as OBC) failsafe on Pixhawk 
this gives an advanced failsafe system which may be useful for other
than OBC use
 2014-08-08 13:48:03 +10:00
Andrew Tridgell 2b89d728f3 Plane: rename to 3.1.0-beta1 2014-08-07 14:14:54 +10:00
Andrew Tridgell d44425449d Plane: started on 3.1.0 release notes 2014-08-07 14:10:49 +10:00
Andrew Tridgell bfe7c47aea Plane: prepare new beta 2014-08-07 13:28:29 +10:00
Andrew Tridgell b414ca930d Plane: fixed servo demo on startup 
thanks to Klrill-ka

fixes issue #1204
 2014-08-07 13:26:47 +10:00
Michael Day 3b62592b26 ArduPlane: attempt to send GCS a message when the GCS heartbeat is not detected. 2014-08-07 12:54:47 +10:00
Przemek Lekston 75f9b8853d GCS_Mavlink.pde: Fix for a possible segfault after passing ARSPD_FBW_MIN 2014-08-07 12:35:31 +10:00
Andrew Tridgell 9184e47f84 Plane: added TERRAIN_LOOKAHD parameter 
distance to look forward for terrain following
 2014-08-07 09:31:03 +10:00
Andrew Tridgell 903b149bcd Plane: fixed typo in description 2014-08-06 17:59:19 +10:00
Andrew Tridgell 781abc7593 Plane: fix for changed AP_Terrain API 2014-08-06 17:59:19 +10:00
Andrew Tridgell 448b3f60e0 Plane: use dataflash logging for terrain 2014-08-06 17:59:19 +10:00
Andrew Tridgell 2a288824c0 Plane: make STAB_PITCH_DOWN in degrees 
try to avoid new centi-degrees parameters
 2014-08-06 17:59:18 +10:00
Andrew Tridgell 781c5bc5dd Plane: use terrain extrapolation 
use best effort extrapolation if we run out of terrain data
 2014-08-06 17:59:18 +10:00
Andrew Tridgell d54bb68270 Plane: prevent cross-track on some WP types 
when finishing a takeoff or when a user forces a WP change don't do
any cross-tracking. This avoids a problem where the plane tries to
line up with a track completely unrelated to the track currently being
flown
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 09a679368b Plane: use bitfields in auto_state 2014-08-04 21:02:13 +10:00
Andrew Tridgell 16f1c6867f Plane: remved int cast 
not portable
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 28facc220d Plane: change threshold for no glide slope to 20m 
40m is quite high for most planes
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 8610d9a8ea Plane: added GLIDE_SLOPE_MIN parameter 
this is used to prevent slow glide slopes being used for small
altitude changes in missions. This allows more accurate tracking of
altitude with terrain changes
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 9536124300 Plane: more accurate altitude tracking close to waypoints 
don't use a glide slope if the altitude change is less than 15 meters
 2014-08-04 21:02:13 +10:00
Andrew Tridgell f983040401 Plane: more fixes for glide slope calculations 2014-08-04 21:02:13 +10:00
Andrew Tridgell b64ab07ca4 Plane: added STAB_PITCH_DN_CD parameter 
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.

defaults to 200 centi-degrees. I may adjust based on flight tests
 2014-08-03 17:17:20 +10:00
Andrew Tridgell fcbdcb520a Plane: rename enum for Telem2Protocol 2014-07-30 14:49:20 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry 
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
 2014-07-29 17:08:20 -07:00
Andrew Tridgell fe3c51d516 Plane: prevent integer underflow with comm_get_txspace() 2014-07-27 22:12:08 +10:00
Andrew Tridgell c9be610dca Plane: fixed sense of altitude test for glide slope 2014-07-25 15:04:16 +10:00
Andrew Tridgell 8904cd105c Plane: fixed auto-doc prefix for TERRAIN 2014-07-25 13:12:23 +10:00
Andrew Tridgell 63cea04d9e Plane: improved TERRAIN_FOLLOW docs 2014-07-25 11:54:51 +10:00
Andrew Tridgell 077177384d Plane: fixed guided alt without terrain bit 2014-07-25 10:31:45 +10:00
Andrew Tridgell 9d6b745556 Plane: fixed terrain glide slope 2014-07-25 09:07:45 +10:00
Andrew Tridgell 88b73492c2 Plane: fixed APM2 build 2014-07-25 08:02:19 +10:00
Andrew Tridgell b158b7e5a9 Plane: replace HAVE_AP_TERRAIN with AP_TERRAIN_AVAILABLE 2014-07-25 07:59:54 +10:00
Andrew Tridgell 07583a0604 Plane: added terrain status reporting 2014-07-24 21:50:19 +10:00
Andrew Tridgell 49c28b747f Plane: fixed glide slope for terrain following 2014-07-24 21:50:19 +10:00
Andrew Tridgell 3e320d71ab Plane: added TERRAIN_FOLLOW parameter 
when enabled RTL, CRUISE and rally points will use terrain altitude
 2014-07-24 21:50:19 +10:00
Andrew Tridgell d18c00d6fc Plane: split up altitude handling 
this creates altitude.pde for altitude handling, getting ready to add
terrain following
 2014-07-24 21:50:19 +10:00
Andrew Tridgell 43b2e34242 Plane: fixed txsize check for airspeed info 
prevent underflow
 2014-07-24 21:46:06 +10:00
Andrew Tridgell 6f538aa556 Plane: handle TERRAIN_CHECK requests 2014-07-24 21:46:06 +10:00
Andrew Tridgell 32bfeed169 Plane: incorporate terrain mavlink calls 2014-07-24 21:45:47 +10:00
Andrew Tridgell e725b2c77e Plane: added terrain object 2014-07-24 21:45:46 +10:00
akdslr 2373b291f4 ArduPlane Parameters: Changed the SONAR prefix to RNGFND 2014-07-24 14:41:54 +10:00
Andrew Tridgell a83509f6a3 Plane: fixed compass logging for COMPASS_PRIMARY != 0 2014-07-23 18:42:14 +10:00
Andrew Tridgell ae29a24348 Plane: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell f6bba74fb6 Plane: enable MPU9250 for Linux build 2014-07-14 09:44:34 +10:00
Víctor Mayoral Vilches fc57bdedde ArduPlane/config.h: Add the PXF hardware setup 2014-07-14 09:31:41 +10:00
Andrew Tridgell c5a765758c Plane: update for new API 2014-07-13 15:37:50 +10:00
Andrew Tridgell 473865ccc1 Plane: prepare for 3.0.4-beta3 2014-07-11 07:40:59 +10:00
Randy Mackay aef746b3b1 Plane: pass in compass to Arming constructor 2014-07-10 22:51:29 +09:00
Randy Mackay b17125e261 Plane: PREFLIGHT_SET_SENSOR_OFFSETS used to set compass offsets 
replaces ardupilot specific SET_MAG_OFFSETS message
 2014-07-10 20:25:24 +09:00
Randy Mackay 208a2de777 Plane: rename compass set_and_save_offsets 2014-07-10 20:25:21 +09:00
Randy Mackay 042c65c501 Plane: add support for DO_SET_ROI outside of missions 2014-07-09 21:27:01 +09:00
Randy Mackay 873eb68d79 Plane: add support for DO_SET_ROI within mission 2014-07-09 21:26:02 +09:00
Andrew Tridgell 3390224491 Plane: avoid some float conversion warnings 2014-07-08 20:26:07 +10:00
Andrew Tridgell 28e1449e8d Plane: updates for new AP_RangeFinder API 2014-07-08 15:07:50 +10:00
Andrew Tridgell 5aa58d2ab5 Plane: support 3 magnetometers 2014-07-04 12:49:25 +10:00
Andrew Tridgell 017e4b4c8a Plane: update for AP_Mount change 2014-06-18 12:04:53 +10:00
Randy Mackay d8573d0722 Plane: loiter num turns from low byte of p1 
This limits the maximum number of turns to 255 for plane
 2014-06-17 20:53:59 +10:00
Randy Mackay ac65119cfe Plane: use common Log_Write_Camera 
pair programmed with Craig Elder
 2014-06-17 14:11:47 +10:00
Andrew Tridgell 105382bf21 Plane: release 3.0.4beta2 2014-06-07 20:52:08 +10:00
Andrew Tridgell ea086fa79c Plane: added MAV_CMD_DO_INVERTED_FLIGHT support 
allows for mission control over inverted flight
 2014-06-05 16:12:10 +10:00
Andrew Tridgell 55e7f9b1d6 Plane: calculate next_turn_angle to prevent early WP completion 
this should help for ball drop and camera trigger with straight line
runs
 2014-06-05 09:35:09 +10:00
Andrew Tridgell a7868dd6b3 Plane: fixed zero throttle in FBWA glide failsafe 2014-06-04 09:39:45 +10:00
Andrew Tridgell 1e2b644b1b Plane: fix for HAL_GPIO_* 2014-06-02 10:42:36 +10:00
Andrew Tridgell 24325a5c62 Plane: fixed takeoff throttle slew rate 
when TKOFF_THR_SLEW is zero use the normal slew rate
 2014-05-31 16:47:45 +10:00
Andrew Tridgell cea30e1d9f Plane: use new GCS_Common.cpp functions 2014-05-28 09:36:04 +10:00
Andrew Tridgell 055d8fe7aa Plane: added TKOFF_THR_MAX parameter 2014-05-24 22:19:50 +10:00
Andrew Tridgell dfedc377b1 Plane: aim for 5 degrees pitch during accel phase of takeoff 
this makes it less likely we will get prop strike
 2014-05-23 07:30:59 +10:00
Andrew Tridgell d4c4c71df5 Plane: improve takeoff docs for tricycle undercarriage 2014-05-23 07:30:59 +10:00
Andrew Tridgell 286479ee93 Plane: prevent stalled takeoff with bad TKOFF_TDRAG_SPD1 
go to level pitch if pitch rises by 10 degrees
 2014-05-23 07:30:59 +10:00
Andrew Tridgell d87619c2f1 Plane: added 4 new parameters to control takeoff 
this gives flexible control for taildragger takeoff
 2014-05-23 07:30:58 +10:00
Andrew Tridgell c29cc24ad8 Plane: fixed sign of target and nav bearing in logs 2014-05-23 07:30:58 +10:00
Andrew Tridgell f2556535da Plane: moved takeoff code to a new file 2014-05-23 07:30:58 +10:00
Andrew Tridgell 511e8beaed Plane: updates for new GCS_MAVLink API 2014-05-21 12:45:25 +10:00
Andrew Tridgell 2b44d33694 Plane: update baud rate parameter descriptions 2014-05-21 12:45:25 +10:00
Andrew Tridgell 94d528e548 Plane: changed baudrate parameters to 16 bit 2014-05-21 12:45:25 +10:00
Andrew Tridgell 2a230b2703 Plane: set version to 3.0.4beta 2014-05-19 22:03:18 +10:00
Andrew Tridgell 8c5226a17a Plane: prepare for release of 3.0.3 2014-05-19 09:54:15 +10:00
Andrew Tridgell 69b5f352f6 Plane: prevent a bad glide slope when first entering auto 
we need to ensure that prev_WP_loc is not used as it could be
completely different from current_loc. As a precuation, this also sets
up next_WP_loc so that when the set_next_WP() is first called that
prev_WP_loc is set to current_loc
 2014-05-18 16:14:11 +10:00
Andrew Tridgell bd09d8551d Plane: use setup_uart() 2014-05-16 11:44:53 +10:00
Andrew Tridgell 3a73878ca7 Plane: mark 3.0.3beta 2014-05-15 22:59:02 +10:00
Andrew Tridgell 182d0f9cb0 Plane: added reporting of AHRS health 2014-05-15 21:14:22 +10:00
Randy Mackay 409a593c1a Plane: prepended APM to RSSI_PIN's @Values 
This makes it consistent with rover and copter and clarifies where the
pin is on the Pixhawk
 2014-05-15 17:13:48 +09:00
Andrew Tridgell 0991af86f3 Plane: removed some usused code 
setting up flight modes by CLI is not used any more
 2014-05-08 11:10:50 +10:00
Andrew Tridgell c1aa2181dc Plane: update release notes for 3.0.2 2014-05-04 16:31:07 +10:00
Andrew Tridgell f233f95785 Plane: prepare for release of 3.0.2 2014-05-04 16:04:08 +10:00
Andrew Tridgell f51478ee1d Plane: fixed LOITER_TURNS counter for counter-clockwise loiter 
thanks to Iskess for finding this bug!
 2014-05-01 20:45:34 +10:00
Andrew Tridgell 92714b09d2 Plane: added ATRP log header to plane log headers 
too many people can't understand how to download .bin logs
 2014-04-30 21:22:28 +10:00
Jonathan Challinger 0bc0abf02d Plane: Supply compass with current measurement for compassmot 2014-04-29 16:20:19 +10:00
Andrew Tridgell 0408c11637 Plane: mark 3.0.2beta 2014-04-29 11:56:52 +10:00
Andrew Tridgell ccc8a6a6ed Plane: use MIS_AUTORESET when entering AUTO mode 2014-04-29 11:46:06 +10:00
Andrew Tridgell 956ff65a25 Plane: RC override input should be considered as valid RC input 
this prevents us setting trim values under joystick control
 2014-04-29 11:46:06 +10:00
Andrew Tridgell 0306dbf5f1 Plane: moved auto mode variables to auto_state 2014-04-27 15:34:30 +10:00
Andrew Tridgell 08412391f5 Plane: fixed a bug when switching to another mode from auto takeoff 
when you exit auto and a takeoff is still in progress the flight stage
was not updated, which led to the throttle staying at maximum

Many thanks to Marco for finding this!
 2014-04-23 21:18:11 +10:00
Andrew Tridgell e15350f756 Plane: use get_current_nav_index() 2014-04-22 11:40:18 +10:00
Andrew Tridgell 12012c9530 Plane: fixed a potential numerical error close to waypoints 2014-04-21 18:49:30 +10:00
Andrew Tridgell 0de41f0ce1 Plane: set AHRS vehicle class 2014-04-21 18:13:12 +10:00
Andrew Tridgell 994ce50714 Plane: setup failsafe values for OBC in failsafe callback 2014-04-21 11:52:54 +10:00
Andrew Tridgell 2ab4ffef45 Plane: use new APM_OBC API 2014-04-21 11:52:53 +10:00
Andrew Tridgell 41100a13c3 Plane: setup failsafe trim values for if FMU firmware dies 2014-04-21 08:37:56 +10:00
Randy Mackay 2a298d0ea4 Plane: remove RALLY_WP_SIZE definition 2014-04-19 15:00:32 +09:00
Michael Day 568fc9e6c9 Plane: Now using AP_Rally library. 2014-04-19 09:16:05 +10:00
Andrew Tridgell d30c4ffe80 Plane: added AUTOTUNE_LEVEL parameter 2014-04-13 22:12:27 +10:00
Andrew Tridgell 8a20130ca8 Plane: changed for APM_Control API 2014-04-12 18:22:01 +10:00
Andrew Tridgell 1bce4239a3 Plane: added AUTOTUNE flight mode 
this is just like FBWA, but with automatic roll/pitch tuning
 2014-04-12 14:12:14 +10:00
Andrew Tridgell d37f1a1376 Plane: updates for OBC API change 2014-04-11 16:47:40 +10:00
Andrew Tridgell 4d990fa6c8 Plane: ensure we log both GPS at the time we receive a msg 2014-04-10 10:29:53 +10:00
Andrew Tridgell e79f1d0940 Plane: prepare for release of 3.0.1 2014-04-10 07:52:36 +10:00
Andrew Tridgell aabcc2bb35 Plane: fixed a bug in PWM based throttle failsafe 
many thanks to Sam Tabor for finding this bug!
 2014-04-10 07:43:48 +10:00
Andrew Tridgell affcea5342 Plane: fixed typo in VRBrain port 2014-04-08 21:22:05 +10:00
Emile Castelnuovo a111d174c1 Plane: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell d0331e0f25 Plane: spelling fixes 2014-04-08 09:49:25 +10:00
Andrew Tridgell d2d9ad5bbd Plane: prepare for 3.0.0 release 2014-04-08 09:46:30 +10:00
Andrew Tridgell c66008cdfa Plane: fixed displayname for FENCE_AUTOENABLE 2014-04-08 09:13:39 +10:00
Andrew Tridgell 95764f4d78 Plane: fixed allocation and reporting of fence status 
prevent a false fence active report on boot, and prevent the fence
from loading when it is not needed. This saves about 200 bytes of ram
on APM2 for most users
 2014-04-07 17:28:03 +10:00
Michael Oborne 3fe9486868 Plane: fix auto doc unit on GROUND_STEER_DPS 2014-04-07 13:43:15 +10:00
Andrew Tridgell de3c04adaf Plane: show next wp when not running a mission 
this lets the GCS know what wp would be run if auto mode is selected
 2014-04-07 11:40:58 +10:00
Andrew Tridgell 1fe7b2fe18 Plane: update for new APM_OBC API 2014-04-07 07:28:35 +10:00
Andrew Tridgell f7858bfb0a Plane: added support for SERIAL_CONTROL message 2014-04-05 07:34:33 +11:00
Andrew Tridgell 5a84fb96ed Plane: build fix 2014-04-03 20:54:50 +11:00
Andrew Tridgell 1efadb7a05 Plane: fixed some warnings 2014-04-03 12:48:06 +11:00
Andrew Tridgell 3c33eb3f09 Plane: use new channel output API 2014-04-03 12:19:11 +11:00
Andrew Tridgell 88693796ef Plane: update for GPS.setHIL() API 2014-04-02 07:55:28 +11:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 958e17f4ff Plane: use AP_GPS_Auto for 2nd GPS 2014-04-01 06:38:23 +11:00
Andrew Tridgell 14671d0bcd Plane: fixed previous_mode error in geofence 
when we were in MANUAL we would switch back to STABILIZE
 2014-03-29 13:53:19 +11:00
Andrew Tridgell bcbdb15c7d Plane: changed version to 2.79beta1 2014-03-28 09:47:59 +11:00
Andrew Tridgell 61ebf365d9 Plane: fixed reverting modes when FENCE_SET_RALLY is enabled 
we need to keep the guided destination we are using
 2014-03-27 10:41:24 +11:00
Andrew Tridgell 8639676eb3 Plane: we need 5 points for a valid geofence 
the first and last points need to be the same for it to be a closed
polygon
 2014-03-27 10:40:00 +11:00
Michael Day 268b1e85a1 Plane: Changes needed prior to merging with master identified by Tridge. 2014-03-27 09:26:20 +11:00
Michael Day f921d4fbac Plane: FENCE_RET_RALLY param. Plane returns to rally point on breach. 2014-03-27 09:26:20 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell 32a1c717e6 Plane: report up to 18 RC input channels via MAVLink 2014-03-25 14:47:43 +11:00
Andrew Tridgell ff70c87f0b Plane: support 14 RC channels on PX4 2014-03-25 14:47:05 +11:00
Andrew Tridgell 09ed8d5819 Plane: updates for new RCInput API 2014-03-25 14:47:05 +11:00
Andrew Tridgell b8781ccea7 Plane: fixed a compiler warning 2014-03-24 12:52:05 +11:00
Andrew Tridgell e8b9f22b01 Plane: updates for GPS changes 2014-03-24 12:04:31 +11:00
Andrew Tridgell d124fdb182 Plane: report compass unhealthy if primary compass unhealthy 2014-03-24 07:03:53 +11:00
Andrew Tridgell f6b56b5d26 Plane: fixed mission resume at arbitrary waypoints 
on completion of a mission a user can ask for it to resume at any wp
 2014-03-21 10:21:37 +11:00
Andrew Tridgell 861523a00a Plane: use TECS get_target_airspeed() 2014-03-20 17:34:33 +11:00
Michael Day dd06756abf Plane: Add Log_Write_Radio. MASK_LOG_PM must be set for logging to occur. 2014-03-20 09:56:37 +11:00
Andrew Tridgell 4257d8365c Plane: removed check on target_component in ARM/DISARM 
Thanks to DonLakeFlyer for finding this, see
https://github.com/diydrones/ardupilot/pull/909
 2014-03-20 09:06:48 +11:00
Andrew Tridgell ce3f40b095 Plane: use should_log() for more msgs 2014-03-19 14:18:14 +11:00
Andrew Tridgell abfcee1cef Plane: fixed channel reversal in HIL 
makes it possible to reverse channels
 2014-03-19 14:17:40 +11:00
Randy Mackay 3ce56f3086 Plane: integrate Mission cmd field changes 2014-03-19 12:14:24 +09:00
Andrew Tridgell 4031f7d368 Plane: use common deferred message handling 2014-03-19 12:14:17 +09:00
Andrew Tridgell b74fddade3 Plane: use common MISSION_ITEM code 2014-03-19 12:14:11 +09:00
Andrew Tridgell 0d39f354b0 Plane: use new common MAVLink code 2014-03-19 12:13:38 +09:00
Andrew Tridgell 7d3523b4a7 Plane: use _send_buf() functions to reduce stack usage in MAVLink replies 
this re-uses the incoming message buffer in constructing the reply
 2014-03-19 12:13:28 +09:00
Andrew Tridgell 537e78f9fa Plane: much faster mission upload 
send next WP request immediately if possible. This speeds up mission
upload on USB by about 10x
 2014-03-19 12:13:27 +09:00
Randy Mackay 1ad743c4e1 Plane: use common GCS_MAVLink handle_mission methods 2014-03-19 12:13:21 +09:00
Andrew Tridgell 740ecc2c1b Plane: use new handle_mission_request() function 2014-03-19 12:13:12 +09:00
Randy Mackay 2184ff1e58 Plane: set_next_WP fn accepts Location 2014-03-19 12:13:06 +09:00
Randy Mackay 96b2e88e36 Plane: add comment to GCS_Mavlink.pde 2014-03-19 12:13:03 +09:00
Randy Mackay ce9f2ef7f0 Plane: minor command logic comments and reordering 2014-03-19 12:13:01 +09:00
Randy Mackay ad4f30e790 Plane: use mission command specific structures 2014-03-19 12:12:52 +09:00
Randy Mackay 9ef920b0be Plane: integrate dataflash Log_Write_MavCmd 2014-03-19 12:12:45 +09:00
Andrew Tridgell 4bf140aeac Plane: make next_WP and prev_WP be locations 
having a command ID in them doesn't really make sense

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:39 +09:00
Randy Mackay f1b97fee53 Plane: correct typo re RTL home with no mission 2014-03-19 12:12:33 +09:00
Randy Mackay 7f21e3885e Plane: RTL home when AUTO run with no mission 2014-03-19 12:12:31 +09:00
Randy Mackay 6b789cd711 Plane: rename next_nav_command to auto_rtl_command 
This command is only used to get the vehicle home (or to a rally point)
after the mission has completed
 2014-03-19 12:12:30 +09:00
Randy Mackay 982ce56d2b Plane: bug fix to set_current_cmd 
When set_current_cmd mavlink message is received, resume mission only if
the mission has completed.
Stop mission when vehicle leaves AUTO mode.
 2014-03-19 12:12:28 +09:00
Andrew Tridgell 3e05baf95c Plane: fixed build (forward declarations) 2014-03-19 12:12:25 +09:00
Andrew Tridgell 2b5bf45e83 Plane: only activate mission callbacks in AUTO mode 2014-03-19 12:12:24 +09:00
Andrew Tridgell 3277416aeb Plane: fixed relative altitudes and resuming mission 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:22 +09:00
Andrew Tridgell 4992e2e2cf Plane: use mission.resume() not mission.start() 2014-03-19 12:12:19 +09:00
Andrew Tridgell d4510d9b9b Plane: altitude for do_set_home() is in meters 2014-03-19 12:12:18 +09:00
Randy Mackay 27969175d9 Plane: bug fix to Loiter after mission completes 2014-03-19 12:12:16 +09:00
Randy Mackay 790a907811 Plane: use Dataflash lib's Log_Write_Cmd 2014-03-19 12:12:08 +09:00
Randy Mackay 033b7eca9e Plane: integrate variable max num commands 2014-03-19 12:12:02 +09:00
Randy Mackay fcea127537 Plane: CLI uses HAL eeprom storage size definition 2014-03-19 12:11:59 +09:00
Randy Mackay 693ce27bf6 Plane: pass eeprom start to Mission constructor 2014-03-19 12:11:58 +09:00
Randy Mackay 36a5287de5 Plane: call mission.init during startup 2014-03-19 12:11:49 +09:00
Randy Mackay 6e60730c89 Plane: cli test checks read_cmd success before printing 2014-03-19 12:11:41 +09:00
Randy Mackay ccb2daaed3 Plane: Log_Write_Startup checks success of cmd read before logging 2014-03-19 12:11:40 +09:00
Randy Mackay 0827506533 Plane: remove unused WAIT_COMMAND 2014-03-19 12:11:24 +09:00
Randy Mackay 53add04d36 Plane: remove some comments in commands_logic.pde 2014-03-19 12:11:22 +09:00
Randy Mackay 802ab79c84 Plane: bug fix for setting flight_stage based on current command 2014-03-19 12:11:19 +09:00
Randy Mackay c4364a8ff5 Plane: remove unused nonnav_command variables 
non_nav_command_ID and next_nonnav_command variables removed
 2014-03-19 12:11:18 +09:00
Randy Mackay 52a08a5284 Plane: CMD dataflash logs use uint16 for total and num 
Also bug fix for Log_Write_Cmd definition when logging disabled
 2014-03-19 12:11:16 +09:00
Andrew Tridgell f036aa1780 Plane: fixed altitude for takeoff and takeoff heading 
fixes for AP_Mission integration

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:11:09 +09:00
Randy Mackay 601cde2a32 Plane: remove alt_in_cm from mavlink to cmd conversion 2014-03-19 12:11:03 +09:00
Randy Mackay bc86a5043a Plane: bug fix for relative alt 2014-03-19 12:11:00 +09:00
Randy Mackay 9446e9fd2e Plane: integrate AP_Mission library 2014-03-19 12:10:58 +09:00
Randy Mackay ddba6f5c19 Plane: mission integration into GCS_Mavlink.pde 2014-03-19 12:10:57 +09:00
Randy Mackay 97f09ab426 Plane: dataflash logging to use Mission command 2014-03-19 12:10:55 +09:00
Randy Mackay fdaf3fc177 Plane: add AP_Mission object to parameter list 2014-03-19 12:10:54 +09:00
Randy Mackay e88f1953d0 Plane: use common location options masks 2014-03-19 12:10:21 +09:00
Andrew Tridgell 2b8cc1a1df Plane: use set_mode() in do_RTL() 
thanks to Randy for spotting this
 2014-03-15 22:15:06 +11:00
Andrew Tridgell eb7db82210 Plane: altitude for do_set_home() is in meters 2014-03-14 11:26:10 +11:00
Andrew Tridgell d595f36ca5 Plane: print PX4 compass type 2014-03-13 16:26:25 +11:00
Andrew Tridgell 65ae9663d4 Plane: set 2nd GPS as secondary 2014-03-08 21:48:12 +11:00
Andrew Tridgell 8574303a94 Plane: treat PWM below 900 as invalid for mode switch 
the FrSky X8R receiver will briefly give a PWM of 874 on channel 5
when connection is lost to the transmitter. We need to ensure this
doesn't cause a mode switch
 2014-03-08 19:27:50 +11:00
Andrew Tridgell 3a3397d926 Plane: fixup throttle trim on failsafe 2014-03-08 19:27:50 +11:00
Andrew Tridgell c9ebd6a175 Plane: improved RC failsafe handling 
this forces all primary control inputs to the trim value on loss of RC
input, and reduces the timeout for loss of RC input to 1 second from 2
 2014-03-08 16:20:54 +11:00
Andrew Tridgell 2cf98e476c Plane: added support for a separate steering channel 
good for ground steering on larger aircraft
 2014-03-05 12:57:50 +11:00
Andrew Tridgell 8d95b953c3 Plane: removed some unused functions 2014-03-05 09:17:50 +11:00
Andrew Tridgell 0d6064034a Plane: use percent_input() for flaps 2014-03-05 09:17:50 +11:00
Andrew Tridgell e3952112ad Plane: raise default LIM_PITCH_MAX to 20 degrees 
15 is often not enough to climb
 2014-03-03 15:49:04 +11:00
Andrew Tridgell e784c81f3e Plane: only send GPS2_RAW when we have a 2nd GPS 2014-03-03 07:05:52 +11:00
Andrew Tridgell 6b9e1edf38 Plane: disable GPS2 in HIL 2014-02-27 08:16:28 +11:00
Andrew Tridgell 07826096a2 Plane: support a 2nd GPS 2014-02-26 09:24:23 +11:00
Andrew Tridgell 95dd252f29 Plane: pass fix type to gps->setHIL() 2014-02-25 21:11:15 +11:00
Andrew Tridgell 8a4289b56f Plane: remove unused variables 
thanks to Mike McCauley
 2014-02-24 18:49:14 +11:00
Andrew Tridgell 4bcf9b5d98 Plane: fixed logging of relative altitude 2014-02-23 08:18:43 +11:00