Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
24,655 Commits 71 Branches 509 Tags 717 MiB
Commit Graph

4825 Commits

Author SHA1 Message Date
Jonathan Challinger e311139a21 Copter: use terrain alt for precland if rangefinder is unavailable 2016-07-12 18:40:25 +09:00
Jonathan Challinger 0f4367744f Copter: update precland at 400hz, log at 25hz 2016-07-12 18:40:25 +09:00
Allan Matthew 860773260f Copter: support GPS_INPUT mavlink message 2016-07-12 15:34:51 +09:00
Andrew Tridgell 3a8ed06267 Copter: added TKOFF_NAV_ALT parameter 
this adds TKOFF_NAV_ALT which controls the altitude above takeoff that
navigation can begin. It is meant for unstable vehicles such as helis
to prevent blade strike during initial takeoff.

This also adds a new parameter class ParametersG2 which can hold 64
parameters. This is to avoid running out of parameters in the first
256 block
 2016-07-07 14:21:47 +09:00
Randy Mackay 877a144dea Copter: pre-arm check that rally points are within fence 2016-07-04 18:25:03 +09:00
Randy Mackay 2647bed484 Copter: guided mode uses modified check_destination_within_fence 2016-07-04 18:25:03 +09:00
Jonathan Challinger 91a5b26725 Copter: use simplified precland interface 2016-07-04 16:57:06 +09:00
Derek Ma 7fddf20f0b Copter: enable precision landing in auto mode 2016-07-04 16:57:06 +09:00
Randy Mackay 543d5701e7 Copter: remove unused log_write_startup 2016-07-04 11:17:16 +09:00
Randy Mackay 5d5a85c38e Copter: log rally points on startup 2016-07-04 11:17:14 +09:00
Andrew Tridgell 6737bc21b9 Copter: fixed typo 2016-07-01 15:34:48 +10:00
Andrew Tridgell b5ccd458d3 Copter: added 10Hz logging of controller RMS values 
as discussed with Leonard
 2016-06-29 14:43:44 +10:00
Randy Mackay 7edb6e76f0 Copter: set terrain capabilities only if terrain code is compiled in 
Thanks to OXINARF for finding this
 2016-06-27 17:11:06 +09:00
Randy Mackay 52d81f630f Copter: pass polygon fence mavlink messages to fence 2016-06-25 15:55:55 +09:00
Randy Mackay b61ae1a4a1 Copter: log EKF yaw reset event 2016-06-24 18:12:30 +09:00
Leonard Hall 07cadc7ddd Copter: rename limit_angle_to_rate_request to use_input_shaping 2016-06-24 17:17:18 +09:00
Leonard Hall 3b7658c502 Copter: land and crash detector use thrust angle error 
The thrust angle error is the difference between our desired thrust vector
and the actual thrust vector

Also some changes to use definitions in place of constants in the checks
 2016-06-24 17:17:18 +09:00
Leonard Hall 7d54c268f6 Copter: consolidate input_euler_angle calls to use smoothing gain 
Previously we had _smooth and non-smooth methods in the attitude
controller but as part of the move to quaternions these have been replaced
by a single call which always takes a smoothing gain
 2016-06-24 17:17:17 +09:00
Leonard Hall 75c4367cfc Copter: Change fabs to fabsf 2016-06-24 15:03:14 +09:00
Peter Barker 043b1d321d Copter: remove paths for documenation for non-multi frame 
Our current documentation system only emits one XML document (apm.pdef.xml)
for ArduCopter.

Since there is a conflict between parameters in the MOT_ namespace in Copter,
we only emit the documentation for the first parameter defining the MOT_ namespace.

This patch removes the documentation lines for frame types other than multicopter, meaning the documentation will reflect mutlictopter usage - the most common case.

These lines will need to be reinstated when we change the way we produce the xml documentation.
 2016-06-24 09:55:28 +09:00
Peter Barker 7742503ef3 Copter: include AC_AttitudeControl parameter documentation 2016-06-24 09:55:26 +09:00
Daniel Ricketts 87be8daf0e Copter: integrate AC_Avoidance library 2016-06-22 11:38:15 +09:00
Daniel Ricketts 5022a45495 Copter: add AC_Avoidance to build 2016-06-22 11:38:15 +09:00
Tom Pittenger 66d4caeeb0 Copter: add ADSB_streamrate 2016-06-19 11:24:33 -07:00
Leonard Hall 9864750336 Copter: rename CTUN desired_velocity to target_velocity 
No functional change
 2016-06-18 11:55:49 +09:00
Randy Mackay a614a17b3a Copter: log hover throttle in CTUN message 2016-06-18 11:55:49 +09:00
Randy Mackay 901e8cc23f Copter: convert THR_MIN to MOT_SPIN_MIN, THR_MID to MOT_THST_HOVER 2016-06-18 11:55:49 +09:00
Leonard Hall 48eb4cf674 Copter: remove THR_MID 2016-06-18 11:55:49 +09:00
Leonard Hall e9d8a28ec0 Copter: AP_Motor's throttle_hover replaces throttle_average 2016-06-18 11:55:49 +09:00
Leonard Hall dec9323127 Copter: remove THR_MIN 
Equivalent is AP_Motors SPIN_MIN
 2016-06-18 11:55:49 +09:00
Randy Mackay 6a1bdebf25 Copter: remove THR_MAX definition for changing throttle input range 
We do not support changing the throttle input range from it's expected 0 ~ 1000
 2016-06-18 11:55:49 +09:00
Leonard Hall e08e112c6d Copter: land detector sets att vs thr priority in att controllers 2016-06-18 11:55:49 +09:00
Andrew Tridgell 86d8450666 Copter: use loop rate for copter 
this allows for SCHED_LOOP_RATE below 400 in SITL for copter
 2016-06-17 15:01:18 +10:00
Peter Barker 1fc4063117 Copter: correct TERRAIN_FOLLOW parameter comments 2016-06-08 17:35:20 +09:00
Andrew Tridgell 55ad1548e4 Copter: fixed heli rotor speed control from AP_Motors refactor 2016-06-04 16:22:19 +10:00
Tom Pittenger a96abde4bf Copter: do not log CURR.Throttle because it's already logged elsewhere 2016-06-02 16:59:11 -07:00
Tom Pittenger b433250da5 Copter: sanity check gps latlng 2016-06-01 17:38:50 -07:00
Randy Mackay 2815af81ad Copter: rename RTL_CONE_SLOPE_DEFAULT definition 
Also tiny formatting fix
 2016-05-31 12:20:21 +09:00
Peter Barker e977d85e0c Copter: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Peter Barker 3cf174c343 Copter: move adjust_rate_for_stream up 2016-05-29 19:38:49 +10:00
Peter Barker bb19c57615 Copter: subclass GCS_MAVLink in place of defining its functions for it 2016-05-29 16:21:21 +10:00
Randy Mackay 5fb6e4edae Copter: 3.4-rc1 release notes 2016-05-28 15:45:32 +09:00
Randy Mackay be3b1cb6ab Copter: convert STB_ params to ATC_ANG_ 2016-05-28 15:45:30 +09:00
Andrew Tridgell 53fc095d4c Copter: fixed motor test build on heli 
pwm percent makes no sense
 2016-05-26 15:05:52 +10:00
Andrew Tridgell c605f09859 Copter: fixed motor test with percentage 
use motors min/max pwm, not throttle channel range
 2016-05-26 14:34:27 +10:00
Andrew Tridgell 146a59eed3 Copter: fixed ESC calibration on PixRacer 
we need to set the ESC scaling before we go into the calibration loop
or the outputs will never arm
 2016-05-25 19:35:17 +10:00
Andrew Tridgell 045e3c179a Copter: moved EKF2 to a new parameter index 
the meanings of many of the parameters have changed. Best to use a new
index to prevent old parameters from causing crashes
 2016-05-25 19:35:17 +10:00
Randy Mackay cb9ca94dd1 Copter: remove unused pv_location_to_vector_with_default 2016-05-25 16:19:42 +09:00
Randy Mackay 390d06a400 Copter: add and use FLIP_COMPLETE mode reason 
No need to use the original reason we entered flip mode as the reason we are exiting flip.  Instead we can use a new reason called FLIP_COMPLETE
 2016-05-25 16:15:34 +09:00
Andrew Tridgell 7e1ef905d3 Copter: removed 30ms delay on arming 
this is the last of the delays that can cause the EKF to get unhappy
on arming in copter. The comment says it is waiting for RC input, but
I don't think that makes any sense any more.
 2016-05-24 15:42:53 +10:00
Randy Mackay c9284e5f64 Copter: fix flip after throttle changed to 0 to 1 range 2016-05-24 11:31:40 +09:00
Randy Mackay f28666e7cd Copter: pass throttle for esc calibration in 0 to 1 range 2016-05-24 10:00:25 +09:00
Lucas De Marchi 33f5fc5f38 ArduCopter: remove support for flymaple 2016-05-23 21:49:45 -03:00
Andrew Tridgell a922b98ac0 Copter: use send_heartbeat wrapper 2016-05-21 15:25:18 +10:00
Andrew Tridgell 8913dc32b0 Copter: simplify UART setup 2016-05-21 15:25:16 +10:00
Andrew Tridgell 31866c66d8 Copter: always build with MAVLink2 headers 2016-05-21 15:25:15 +10:00
Andrew Tridgell 57870cccb9 ArduCopter: update signing timestamp on GPS lock 2016-05-21 15:25:13 +10:00
Andrew Tridgell b85f129cc5 ArduCopter: handle SETUP_SIGNING message 2016-05-21 15:25:12 +10:00
Randy Mackay 5461002eea Copter: read rangefinder at 20hz 2016-05-21 10:36:53 +09:00
Randy Mackay e6b3638d84 Copter: minor change to land mode's logic to use rangefinder 
No functional change
 2016-05-21 10:36:53 +09:00
Randy Mackay 8171532dc5 Copter: allow rangefinder to be disabled from definition 2016-05-21 10:36:53 +09:00
Randy Mackay e489c3184c Copter: rangefinder.enabled false if no range finders are configured 2016-05-21 10:36:53 +09:00
Randy Mackay 59070653cc Copter: provide filtered range finder altitude to AC_WPNav 2016-05-21 10:36:53 +09:00
Randy Mackay e18bf3af56 Copter: remove unused definitions 2016-05-21 10:36:53 +09:00
Randy Mackay 5ac13c0355 Copter: move rangefinder variables into structure 
moved in rangefinder_alt, rangefinder_alt_health and rangefinder_enabled
 2016-05-21 10:36:53 +09:00
Randy Mackay 70463dc572 Copter: auto_spline_start handles triggers terrain failsafe 
Also immediately exit auto_wp_start on terrain failsafe
 2016-05-21 10:36:53 +09:00
Randy Mackay 3688636736 Copter: RTL ignores terrain during terrain failsafe 2016-05-21 10:36:53 +09:00
Randy Mackay 273b9acad8 Copter: prearm check that RTL_ALT is below rangefinder max alt 
Only applies where terrain following is enabled and a range finder is connected
 2016-05-21 10:36:53 +09:00
Randy Mackay c7f80324fa Copter: tilt correct rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay ba38b0234f Copter: use rangefinder class's valid_range_count 
Also read_rangefinder directly updates rangefinder_alt variable instead of returning distance
No functional change
 2016-05-21 10:36:53 +09:00
Randy Mackay 949d5f7109 Copter: add rangefinder_alt_ok 
Reduces some duplicate code,no functional change.
 2016-05-21 10:36:53 +09:00
Randy Mackay 7689315ba2 Copter: rename sonar to rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay 028946ae9e Copter: rename CONFIG_SONAR to RANGEFINDER_ENABLE 2016-05-21 10:36:53 +09:00
Randy Mackay e0bf08abe0 Copter: fixes to guided mode target check is within fence 
guided altitude targets are converted to alt-above-home
remove unnecessary fence_status local variable from guided_set_destination methods
log failures to set guided target under a new failure code: ERROR_CODE_DEST_OUTSIDE_FENCE (5)
rename pv_get_home_destination_distance_mc to pv_distance_to_home_cm
 2016-05-21 09:56:12 +09:00
Saloni Jain bc22419286 Copter : Modified set_guided_destination() to reject requests for guided waypoints outside the fence. 2016-05-21 09:56:12 +09:00
Don Gagne 97d361333d ArduCopter: SET_SENSORS_OFFSETS support for third compass 2016-05-19 18:51:17 -03:00
Randy Mackay a9d16f3373 Copter: move auto's take-off check to beginning of auto_init 
This ensures there are no side-effects of a failed switch to AUTO like stopping the vehicle or affecting the yaw mode
 2016-05-19 19:43:24 +09:00
Niti Rohilla 26e41fee7a Copter: prevent Auto tipovers caused by missing takeoff command 2016-05-19 19:43:19 +09:00
Randy Mackay 793e3da904 Copter: rename variables used for NAV_DELAY command 2016-05-19 16:16:03 +09:00
Niti Rohilla 55f66b7696 Copter: Add support for MAV_CMD_NAV_DELAY 2016-05-19 16:16:02 +09:00
Andrew Tridgell e4948544e7 Copter: cleanup unnecessarily complex gcs[] usage 2016-05-17 08:27:35 +10:00
dgrat 3bc97ae356 ArduCopter: Do not use is_zero() for non-float types 
This function makes only sense for floating point types. However this
function was also used for ints.
 2016-05-16 19:08:35 -03:00
Ricardo de Almeida Gonzaga ce241dd97a ArduCopter: Fix typos 2016-05-13 19:20:07 -03:00
Francisco Ferreira 8fb318a6e1 Copter: fix do_loiter when executed in same location 2016-05-13 12:20:22 +09:00
Francisco Ferreira 8ce8551669 Copter: fix detection of 0 values for lat, lng and alt in waypoints 2016-05-13 12:20:20 +09:00
Randy Mackay 0732ad3957 Copter: add comments to set_land_complete 2016-05-13 12:01:38 +09:00
Jonathan Challinger 747344a8ba Copter: add disarm on land detect option to PILOT_THR_BHV 2016-05-13 11:57:48 +09:00
Randy Mackay cfb2a6b2f9 Copter: update brake-timeout to work with master 
We added mode-change reasons since PR was submitted
 2016-05-13 11:42:25 +09:00
Randy Mackay 0a2336a5a8 Copter: update solo-buttons to work with master 
Change was due to addition of reason codes since PR was first submitted
 2016-05-13 11:42:25 +09:00
Jonathan Challinger 67cd2bae08 Copter: implement SOLO_BTN commands 2016-05-13 11:42:25 +09:00
Jonathan Challinger c99cac773b Copter: add brake_timeout_to_loiter_ms 2016-05-13 11:42:25 +09:00
Andrew Tridgell bd3a58a727 Copter: fixed drift mode 
the throttle assistance gain also needs to be scaled by 1000x for new throttle range
 2016-05-13 08:48:55 +10:00
Andrew Tridgell 75d76ac3bd Copter: fixed scaling of old heli parms 2016-05-12 17:34:36 +10:00
dgrat 41661f815f AP_Math: Replace the pythagorous* functions with a variadic template 
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
 2016-05-10 11:41:26 -03:00
dgrat 76362caee0 AP_Math: Replace wrap_* functions with template versions 2016-05-10 11:41:26 -03:00
skyscraper 4980c8bc94 ArduCopter: RC_Channel refactor 
More fixing up of RC_Channel change direct access to data members
to access via member functions.
 2016-05-10 16:21:16 +10:00
skyscraper 49d3410896 ArduCopter: fixup RC_Channel data member accesses to function calls 2016-05-10 16:21:16 +10:00
skyscraper 6f200fa923 ArduCopter: Fix up after refactoring RC_Channel class 
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
 2016-05-10 16:21:16 +10:00
Andrew Tridgell 3c9b063eb1 Copter: removed unnecessary libs 
now in common
 2016-05-10 14:13:35 +10:00
Andrew Tridgell 111eb2ccc1 Copter: use DataFlash::log_while_disarmed() 2016-05-09 12:05:52 +10:00
Leandro Pereira f23bd7e09d GCS_MAVLink: Use a single stream_trigger() implementation 
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
 2016-05-07 23:49:35 -03:00
Andrew Tridgell 874fae931f Copter: fix for changed API 2016-05-07 18:27:22 +10:00
Andrew Tridgell 9da3b8db60 Copter: only log baro, gps and mag if ekf not logging them 2016-05-07 18:27:19 +10:00
Andrew Tridgell b235304235 Copter: reduce IMU logging to 25Hz 
leave more room for IMT logging needed for Replay
 2016-05-07 18:27:17 +10:00
Randy Mackay a5c55c3fbd Copter: fix get_non_takeoff_throttle 
The throttle_mid parameter (for historic reason) is interpreted as a value that includes throttle_min.  This means we must subtract the throttle_min value from it when converting it to a throttle in the 0 to 1 range.
 2016-05-07 12:21:41 +09:00
Randy Mackay 2eb0484142 Copter: rename Loiter states and swap order within select statement 2016-05-07 10:08:34 +09:00
Randy Mackay 1c4db779a1 Copter: Loiter stabilizes roll and pitch while landed 2016-05-07 10:08:32 +09:00
Randy Mackay 9c12b64ba5 Copter: rename AltHold states and swap order within select statement 
No functional change
 2016-05-07 10:08:30 +09:00
Randy Mackay 932cd907d4 Copter: AltHold stabilizes roll and pitch while landed 2016-05-07 10:08:28 +09:00
Randy Mackay 3ead74c4be Copter: remove zero-throttle check from AltHold takeoff state 
Hard to imagine a reason why we would want to turn off stabilization during takeoff
 2016-05-07 10:08:26 +09:00
Lucas De Marchi fea084a596 Global: use ap_version.h 
This header is used by waf to contain the generated version macros,
particularly using the git hash. For waf it's better to be in a separate
header since it then can keep track of changes on it a trigger
recompilation.

For the make build system, a dummy ap_version.h file has been added in
the missing/ folder so both implementations can co-exist.
 2016-05-06 13:11:28 -03:00
Lucas De Marchi 352e103f1a ArduCopter: use separate header for version macro 
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.

Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
 2016-05-06 13:11:28 -03:00
Allan Matthew d6012c535e Copter: remove unused dt passed to precland 2016-05-06 11:04:45 +09:00
skyscraper 6bcd9e6f65 Copter::pre_arm_rc_checks: fix logic checking that throttle min and max are configured 2016-05-06 10:56:38 +09:00
Allan Matthew 7960e3bb8f Copter: pass DISTANCE_SENSOR messages to rangefinders 
This allows the MAVLink range finder driver to intercept distance measurements
 2016-05-04 12:10:58 +09:00
Michael du Breuil e7974702d4 Copter: Ignore POSITION_TARGET_GLOBAL_INT 2016-05-01 07:38:24 +10:00
Michael Oborne 5848d8a5e6 ArduCopter: support MAVLINK_MSG_ID_MISSION_ITEM_INT 2016-05-01 07:13:46 +10:00
Andrew Tridgell 54d1cc7e50 Copter: only save offsets for Compass::LEARN_EKF 
this means by default that one flight one affect the next one, which
makes it more robust in case of a bad flight
 2016-04-30 16:43:14 +10:00
Michael du Breuil c97888f524 Copter: Remove support for CONDITION_CHANGE_ALT 2016-04-30 10:56:07 +09:00
Randy Mackay d455e2a33f Copter: fix auto-circle comment 2016-04-30 10:33:01 +09:00
Randy Mackay a6b6fb2473 Copter: fix TERRAIN_FOLLOW parameter description 
Thanks OXINARF
 2016-04-30 10:33:01 +09:00
Randy Mackay 3d31c3b936 Copter: log error if circle does not initialise correctly 2016-04-30 10:33:01 +09:00
Randy Mackay caf6bbc2e0 Copter: rename set_alt to set_alt_cm in control_rtl 2016-04-30 10:33:01 +09:00
Randy Mackay fac7b7c566 Copter: rename set_alt to set_alt_cm in control_guided 2016-04-30 10:33:01 +09:00
Randy Mackay f8f6c135e9 Copter: rename set_alt to set_alt_cm in control_auto 2016-04-30 10:33:01 +09:00
Randy Mackay d92154a44e Copter: rename set_alt to set_alt_cm in commands_logic 2016-04-30 10:33:01 +09:00
Randy Mackay cd97aa97a3 Copter: provide terrain reference to AC_WPNav 2016-04-30 10:33:01 +09:00
Randy Mackay cac79f297e Copter: guided can trigger terrain failsafe 2016-04-30 10:33:01 +09:00
Randy Mackay 9100cf605a Copter: auto can trigger terrain failsafe 2016-04-30 10:33:01 +09:00
Randy Mackay 43d14defd4 Copter: RTL handles terrain data failure 2016-04-30 10:33:01 +09:00
Randy Mackay 47658fe964 Copter: add terrain failsafe 2016-04-30 10:33:01 +09:00
Randy Mackay 8e43be1511 Copter: fixes to allow compiling without terrain support 2016-04-30 10:33:01 +09:00
Randy Mackay 74e02d2c82 Copter: rename TERRAIN_USE to TERRAIN_FOLLOW 
This matches plane's parameter name
 2016-04-30 10:33:01 +09:00
Randy Mackay 13c26eab67 Copter: update current_loc at 400hz 2016-04-30 10:33:01 +09:00
Randy Mackay f45c69e7ad Copter: log terrain altitude in CTUN message 2016-04-30 10:33:01 +09:00
Randy Mackay 25c676c3b4 Copter: report terrain capability to GCS 2016-04-30 10:33:01 +09:00
Randy Mackay ddffbe27aa Copter: add terrain pre-arm check 2016-04-30 10:33:01 +09:00
Randy Mackay 91f6c7b503 Copter: add TERRAIN_USE parameter 
Also add terrain.cpp to hold terrain_update and terrain_logging functions
 2016-04-30 10:33:01 +09:00
Randy Mackay 267c1c3934 Copter: guided mode handles terrain alt 2016-04-30 10:33:01 +09:00
Randy Mackay e8b14e59fc Copter: spline mission commands handle terrain altitudes 2016-04-30 10:33:01 +09:00
Randy Mackay 81d244c9bd Copter: do-circle accept terrain altitude 2016-04-30 10:33:01 +09:00
Randy Mackay 70630e9774 Copter: auto loiter handles terrain 2016-04-30 10:33:01 +09:00
Randy Mackay 4892446c55 Copter: do-loiter accepts terrain altitudes 2016-04-30 10:33:01 +09:00
Randy Mackay 27517004c0 Copter: slow to land-speed 10m above terrain 2016-04-30 10:33:01 +09:00
Randy Mackay 39dc2d7176 Copter: while landing use land-speed from 10m above home 
Previously vehicle was switching to land-speed at 10m above the origin
 2016-04-30 10:33:01 +09:00
Randy Mackay ffd86744ce Copter: do-land accepts terrain 2016-04-30 10:33:01 +09:00
Randy Mackay 352b6ae82a Copter: RTL supports terrain altitudes 2016-04-30 10:33:01 +09:00
Randy Mackay 06ee6a7bd4 Copter: auto takeoff accepts abs and terrain alts 2016-04-30 10:33:01 +09:00
Randy Mackay 9449776e3c Copter: straight line waypoints accept terrain 
auto_wp_start calls AC_WPNav's new set_wp_destination which accepts a
Location class allow altitude to be set as above-terrain or even an
absolute altitude
 2016-04-30 10:33:01 +09:00
Randy Mackay 2134e8bfb9 Copter: add terrain and navigation dataflash error codes 2016-04-30 10:33:01 +09:00
Randy Mackay 84fd8da944 Copter: current_loc to Location class 2016-04-30 10:33:01 +09:00
Niti Rohilla 867360c350 ArduCopter : Updated handle_guided_request() to report error. 2016-04-29 12:39:28 -03:00
Tom Pittenger afb3e94fe6 Revert "Copter: clipped param cmd float to zero" 
This reverts commit 9b6de75203.
 2016-04-23 23:51:41 -07:00
Tom Pittenger 9b6de75203 Copter: clipped param cmd float to zero 2016-04-23 23:45:54 -07:00
Randy Mackay 472f54ce45 Copter: initialise compass_mot interference_pct variable 
resolves a compiler warning
 2016-04-23 23:06:28 -07:00
Randy Mackay da443417f1 Copter: remove unnecessary abs 2016-04-23 23:06:19 -07:00
Luis Vale Gonçalves 4e594287eb Revising ardupilot.com to .org 
Revising ardupilot.com to .org
 2016-04-23 22:49:39 -07:00
Randy Mackay 699816400e Copter: ack DO_MOUNT_CONTROL messages 2016-04-22 21:30:49 +09:00
Randy Mackay 762c9ed4b0 Copter: remove unused FS_CLOSE_TO_HOME definition 2016-04-22 21:30:44 +09:00
Randy Mackay 554affeaf5 Copter: fix scheduler comment 2016-04-22 21:30:39 +09:00
Andrew Tridgell a39a4a6243 Copter: mark a few more log messages as critical 2016-04-21 17:05:17 +10:00
Andrew Tridgell f32b7684a0 Copter: removed unused startup log message 2016-04-21 17:05:17 +10:00
Andrew Tridgell 5149a49daa Copter: added logging of dropped log messages in PM message 2016-04-21 17:05:17 +10:00
Jonathan Challinger c9b1b02b8e Copter: loop through compasses and save offsets 2016-04-21 09:53:03 +10:00
Lucas De Marchi a310d3735e ArduCopter: fix handling of SET_HOME_POSITION 
Location.altitude is stored in cm.
 2016-04-18 13:07:45 +10:00
Randy Mackay 55ffee25b1 Copter: remove unnecessary control_mode_t casts 
Thanks @OXINARF
 2016-04-14 12:24:04 +09:00
Jonathan Challinger 8f41215569 Copter: fix warning 2016-04-14 12:24:04 +09:00
Jonathan Challinger 2a36c32cf3 Copter: add prev_control_mode and prev_control_reason 2016-04-14 12:24:04 +09:00
Jonathan Challinger 8ded496f8b Copter: log mode change reason 2016-04-14 12:24:04 +09:00
Jonathan Challinger 1356deab8b Copter: add control_mode_reason 2016-04-14 12:24:04 +09:00
Jonathan Challinger 6b5ba86f21 Copter: simplify GCS failsafe 2016-04-14 12:24:04 +09:00
Jonathan Challinger a0ce8af633 Copter: use enum type for control_mode 2016-04-14 12:24:04 +09:00
Lucas De Marchi 6eac84812c ArduCopter: remove readme file 
The readme file in root directory is already sufficient.
 2016-04-09 08:32:22 -07:00
Ricardo de Almeida Gonzaga 5bd034a5a8 Global: start using cmath instead of math.h 2016-04-05 21:06:19 -07:00
Andrew Tridgell c035ade402 Copter: removed slow_start() from throw mode 2016-04-01 11:59:30 +09:00
Randy Mackay 5090e6f4fb Copter: init G_Dt with MAIN_LOOP_SECONDS definition 2016-04-01 11:59:30 +09:00
Leonard Hall a9cda8b384 Copter: add convert_pid_parameters to ease migration to new PID gains 2016-04-01 11:59:30 +09:00
Randy Mackay 479a789325 Copter: remove call to attitude_control.set_dt 
This is now passed into the constructor
 2016-04-01 11:59:30 +09:00
Randy Mackay c352e1bedf Copter: fix attitude control parameter declaration 2016-04-01 11:59:30 +09:00
Randy Mackay 1f20a5ef69 Copter: access angle and rate PIDs through attitude controller 2016-04-01 11:59:30 +09:00
Randy Mackay bde498375c Copter: remove attitude PIDs 
These are now part of AC_AttitudeControl
 2016-04-01 11:59:30 +09:00
Randy Mackay ef5dbae707 Copter: remove setting of heli_servo_rsc pwm range 
This object is not used
 2016-04-01 11:59:30 +09:00
Randy Mackay 1f37f5a0e7 Copter: remove tradheli swash, yaw and rsc servos 
These are all created within the AP_MotorsSingle class now except for servo_rsc which was unused
 2016-04-01 11:59:30 +09:00
Randy Mackay d2a42a7a0e Copter: remove heli_radio_passthrough 
Replaced with set_radio_passthrough which can be used for all frames
 2016-04-01 11:59:30 +09:00
Randy Mackay ce1fb7fb06 Copter: passthrough pilot input to motors to allow wiggling servos 2016-04-01 11:59:30 +09:00
Randy Mackay 0abea7af68 Copter: remove slow_start from stabilizing 2016-04-01 11:59:30 +09:00
Randy Mackay 1c98cd9d52 Copter: remove slow_start from althold 2016-04-01 11:59:30 +09:00
Randy Mackay f6c26ad285 Copter: remove slow start from acro 2016-04-01 11:59:30 +09:00
Randy Mackay 3c3b74adc8 Copter: remove slow_start from takeoff 2016-04-01 11:59:30 +09:00
Randy Mackay 8180fad4b4 Copter: tradheli sends radio passthrough in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay f0575de776 Copter: tradheli logs rotors speed in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 3eaf7a4582 Copter: set tradheli rotor speed using 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 7fc37e7801 Copter: set tradheli external gyro gain in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall be7ad2d83a Copter: loiter uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 02ac2d0e4e Copter: land uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 94b35d659e Copter: guided uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 4deb6fd39d Copter: flip uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay f91874afad Copter: drift uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 83ae78b38e Copter: circle uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 10f8e36f9b Copter: brake uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 965f3827b4 Copter: poshold uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 478b9af0f3 Copter: autotune uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 4f192d0bc7 Copter: auto uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay a927db3e6a Copter: rtl uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay d37f70f767 Copter: sport uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay f6a6b360a8 Copter: stabilize uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Leonard Hall d2642065dd Copter: althold uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 668561ff0e Copter: acro uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Leonard Hall 6c40d6f774 Copter: remove single frame's servo objects 2016-04-01 11:59:30 +09:00
Leonard Hall 8d0a6765f1 Copter: removed unnecessary #define for motor declaration 2016-04-01 11:59:30 +09:00
Leonard Hall 44180e44df Copter: remove coax servo objects 
servos moved to AP_MotorsCoax class
 2016-04-01 11:59:30 +09:00
Leonard Hall 5dde87734c Copter: heli acro, stabilize use pilot throttle as float 2016-04-01 11:59:30 +09:00
Leonard Hall 07b311f6a8 Copter: brake sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 7366bc8a56 Copter: pos_hold uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 80a11e4d3d Copter: autotune uses throttle in 0 to 1 range and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 068fc7feac Copter: flip uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 8a49745e96 Copter: sport uses throttle in 0 to 1 range and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 263052da21 Copter: drift uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 100fcf799e Copter: land sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall f71157c508 Copter: circle sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall cce426dcb8 Copter: rtl uses throttle in 0 to 1 range and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall f8d03b58d1 Copter: loiter uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 42f5de44d4 Copter: guided sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall f221d4d757 Copter: auto sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 70433d25e3 Copter: althold uses 0 to 1 throttle range and spool logic 
stabilizes even while landed
sets desired motor spool state
check for spool up before takeoff
 2016-04-01 11:59:30 +09:00
Leonard Hall 2180514dde Copter: acro uses 0 to 1 throttle and sets desired spool state 2016-04-01 11:59:30 +09:00
Leonard Hall f56ff4d564 Copter: stabilize uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
Leonard Hall 76a8de8a53 Copter: CTUN logs throttle_in, angle boost in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 7bcdc76655 Copter: get_pilot_desired_climb_rate accepts control_in as 0 to 1000 
Previously the input was expected to be throttle_min (i.e. 130) to 1000
 2016-04-01 11:59:30 +09:00
Leonard Hall 20debc962a Copter: update get_throttle_pre_takeoff for 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 37e6977813 Copter: update get_non_takeoff_throttle for 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 74983669be Copter: set_accel_throttle_I_from_pilot_throttle uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall c3403a128c Copter: throttle passed to compass in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall a44f7f650b Copter: throttle sent to GCS uses 0 to 1 range 
This is probably not correct because we should be sending the throttle as a 0 to 1 number using the full possible output range.  This uses the reduced range passed in when the copter is being stabilized (i.e. between throttle-min and throttle-max)
 2016-04-01 11:59:30 +09:00
Leonard Hall f8d7b677d4 Copter: update_thr_average uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall fd2509f6ed Copter: get_pilot_desired_throttle outputs in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall e132ea34d9 Copter: g.rc_3.control_in range 0 to 1000 
Previously the range was throttle_min (normally 130) to 1000 but we can remove this awkward range and use 0 to 1000 now that the attitude controller and motor library inputs are in the 0 to 1 range.
 2016-04-01 11:59:30 +09:00
Leonard Hall a00a9601a4 Copter: AP_MotorsCoax now uses 4 servos 2016-04-01 11:59:30 +09:00
Leonard Hall a0409e4f9e TradHeli: dynamic flight check uses throttle in 0 to 1 range 2016-04-01 11:59:30 +09:00
Andrew Tridgell f19922fec5 Copter: added LAND_SPEED_HIGH parameter 
this is the descent rate for the first part of a landing. Separating
this from WPNAV_SPEED_DN allows for independent tuning of fast fwd
flight from landings
 2016-03-30 15:54:20 +11:00
Gustavo Jose de Sousa 6074385873 ArduCopter: waf: build all frame types 2016-03-26 15:43:08 -03:00
Gustavo Jose de Sousa 9bec8e5133 ArduCopter: waf: add missing library AC_InputManager 
That is used by heli.
 2016-03-26 15:43:08 -03:00
Gustavo Jose de Sousa a4c099feaa waf: create program groups for main products 
Currently we need to build a different binary for each type of copter frame.
This is a preparation for setting all those binaries to a group called
"copter". We create the groups for the rest of the main products for
consistency.
 2016-03-26 15:43:08 -03:00
Andrew Tridgell 224c99af72 Copter: change code URL 2016-03-25 20:46:54 +11:00
Andrew Tridgell 31000ac756 Copter: moved Log_Write_Rate() to common code 2016-03-25 12:13:59 +11:00
Lucas De Marchi 34155c09e6 ArduCopter: Update path locations for parameters 
Thanks to Francisco Ferreira for noticing that.
 2016-03-23 17:50:38 -03:00
Randy Mackay a8bea0af03 Copter: allow switching to throw without position estimate 
The vehicle arming check will still stop the user from arming in throw mode without a good position estimate.
 2016-03-22 16:21:58 +09:00
Nitay Megides f77eed8f95 Copter: add break after prec landing case clause 
(And fixed indentation)
 2016-03-21 09:34:55 +09:00
Don Gagne cae7ea0d13 Add @Volatile, @ReadOnly support 2016-03-17 10:58:05 +11:00
Lucas De Marchi e88ba38595 ArduCopter: replace header guard with pragma once 2016-03-16 18:40:44 +11:00