Andrew Tridgell
7bf12cfd8a
Copter: update for gps.setHIL() API
2014-04-02 07:55:28 +11:00
Andrew Tridgell
852cdbaa7c
Copter: added GPS parameters
2014-04-01 06:38:25 +11:00
Andrew Tridgell
640b64f5e4
Copter: convert to new GPS API
2014-04-01 06:38:24 +11:00
Andrew Tridgell
198388b5e0
Copter: use AP_GPS_Auto for 2nd GPS
2014-04-01 06:38:23 +11:00
Kevin Hester
5fb3b031f1
Copter: disambiguate the various causes of "Bad GPS Pos"
...
I've seen a fair number of user questions where they are confused by
"Bad GPS Pos" on their GCS/not being allowed to arm. This change splits
the remaining causes of this fault into separate messages.
Hopefully this increases the odds of the user self diagnosing...
2014-03-31 21:59:12 +09:00
Randy Mackay
9e7021cc20
Copter: Notify arming failure when using MAVLink
2014-03-31 20:34:31 +09:00
Jonathan Challinger
608b8b0a2c
Copter: integrate Notify arming failure when using yaw sticks
2014-03-31 20:34:29 +09:00
Randy Mackay
4b6f03cc11
Copter: remove do_land's use of RTL_ALT_MAX
2014-03-31 20:34:21 +09:00
Jonathan Challinger
2601ac9959
Copter: Remove 80m altitude limit on RTL
2014-03-31 20:34:19 +09:00
Jonathan Challinger
045c6d8c3f
Copter: Only play GPS tone when armed
2014-03-31 20:34:16 +09:00
Randy Mackay
d9fd577fb0
Copter: add Drift throttle assist constraints
2014-03-31 15:40:00 +09:00
Jason Short
50dcbe6549
Copter: Drift throttle assist range increased
...
Throttle assist is applied from 213 ~ 787
Deadband and constraint added
2014-03-31 13:09:57 +09:00
Jason Short
bccf1de563
Copter: add drift throttle assist
2014-03-31 13:09:54 +09:00
Randy Mackay
7d5d0d12a2
Copter: spline bug fixes
...
Next waypoint's location must be passed in even if it's a straight
segment.
mission.get_next_nav_cmd's start_index should be the current command +1
2014-03-29 17:57:45 +09:00
Randy Mackay
ac364c93dd
Copter: bug fix for simple_mode when run at 400hz
...
Mark radio frame as consumed so that simple mode does not apply the yaw
correction more than once when run at very high rates (like 400hz on
Pixhawk)
2014-03-28 17:03:31 +09:00
Randy Mackay
176a450ad2
Copter: remove spline handling from regular wp_nav
2014-03-28 09:23:41 +09:00
Randy Mackay
d541fefab4
Copter: add do_spline_wp and verify_spline_wp functions
2014-03-28 09:23:33 +09:00
Randy Mackay
8f946a3a8c
Copter: remove original_wp_bearing
...
To-Do: extend wpnav yaw control to only repoint nose towards waypoint if
it is more than 5m or 10m away
2014-03-28 09:23:21 +09:00
Randy Mackay
392162747a
Copter; integrate WPNAV's get_yaw
2014-03-28 09:23:17 +09:00
Randy Mackay
3753550a72
Copter: integrate get_spline_yaw
2014-03-28 09:23:11 +09:00
Randy Mackay
c0f12911ec
Copter: minor format change
2014-03-28 09:23:02 +09:00
Randy Mackay
0822adfb34
Copter: integrate spline navigation
2014-03-28 09:22:59 +09:00
Andrew Tridgell
78ba1a33aa
Copter: support 18 input channels in MAVLink
2014-03-25 14:47:43 +11:00
Andrew Tridgell
c0767eebff
Copter: support 14 RC channels on PX4
2014-03-25 14:47:05 +11:00
Andrew Tridgell
e1b9135946
Copter: updates for new RCInput API
2014-03-25 14:47:04 +11:00
Andrew Tridgell
3362e42478
Copter: consider health of primary compass in SYS_STATUS, pre-arm and compassmot
...
this should prevent users from taking off with only secondary compass
2014-03-24 19:52:08 +11:00
Andrew Tridgell
11e5b95878
Copter: updates for GPS changes
2014-03-24 12:04:46 +11:00
Randy Mackay
71f61c9bef
Copter: fix typo to show ATUN FMT in dataflash logs
2014-03-21 15:44:06 +09:00
Andrew Tridgell
4a01315fc5
Copter: enable logging of RADIO_STATUS
2014-03-20 09:56:37 +11:00
Andrew Tridgell
a345a9d993
Copter: removed check on target component in arm
...
Thanks to DonLakeFlyer for finding this, see
https://github.com/diydrones/ardupilot/pull/909
2014-03-20 09:06:28 +11:00
Randy Mackay
88527cd01c
Copter: integrate Mission cmd field changes
2014-03-19 12:14:25 +09:00
Andrew Tridgell
e4b3323455
Copter: use common deferred message handling
2014-03-19 12:14:20 +09:00
Andrew Tridgell
69252868a8
Copter: use common MISSION_ITEM handling
2014-03-19 12:14:12 +09:00
Andrew Tridgell
f4ed2beacd
Copter: use new common MAVLink message handlers
2014-03-19 12:13:40 +09:00
Randy Mackay
6ef2b55602
Copter: use common GCS_MAVLink handle_mission methods
2014-03-19 12:13:22 +09:00
Andrew Tridgell
85725de9cb
Copter: use new handle_mission_request()
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:13:15 +09:00
Randy Mackay
a3573f9ebd
Copter: minor typo in do_change_speed processing
...
It is unlikely that the "f" at the end of the 100 is required to
maintain the full precision of the target speed but added just in case
2014-03-19 12:12:55 +09:00
Randy Mackay
08b78db43c
Copter: use mission command specific structures
2014-03-19 12:12:54 +09:00
Randy Mackay
2f8daf2fa9
Copter: integrate dataflash Log_Write_MavCmd
2014-03-19 12:12:46 +09:00
Randy Mackay
edab06a3ff
Copter: truncate mission before uploading new mission
...
replacing clear with truncate allows new missions to be uploaded while
the current mission is running
2014-03-19 12:12:36 +09:00
Randy Mackay
f3813593b7
Copter: use Dataflash lib's Log_Write_Cmd
2014-03-19 12:12:11 +09:00
Randy Mackay
7b6906ae3f
Copter: integrate variable max num commands
2014-03-19 12:12:01 +09:00
Randy Mackay
b587d0d597
Copter: pass eeprom start to Mission constructor
2014-03-19 12:11:56 +09:00
Randy Mackay
b718b9070a
Copter: call mission.init during startup
2014-03-19 12:11:47 +09:00
Randy Mackay
cc7b1c4e9c
Copter: init_home checks cmd read success before logging
2014-03-19 12:11:39 +09:00
Randy Mackay
fa96e9355b
Copter: init cmd before saving with Ch7/Ch8
2014-03-19 12:11:21 +09:00
Randy Mackay
0fc36fd244
Copter: CMD dataflash logs use uint16 for total and num
2014-03-19 12:11:15 +09:00
Randy Mackay
6bb05750e7
Copter: remove alt_in_cm from mavlink to cmd conversion
2014-03-19 12:11:04 +09:00
Randy Mackay
04166c1686
Copter: replace memset in GCS_Mavlink
2014-03-19 12:10:52 +09:00
Randy Mackay
c3162f67e8
Copter: integrate move of p1 from Location to mission cmd
2014-03-19 12:10:48 +09:00
Randy Mackay
aade894014
Copter: integrate replace_cmd
2014-03-19 12:10:43 +09:00
Randy Mackay
54c99d84ea
Copter: integrate AP_Mission set_current_cmd
2014-03-19 12:10:39 +09:00
Randy Mackay
36af34bf8b
Copter: send current wp as 65535 to GCS when mission complete
2014-03-19 12:10:34 +09:00
Randy Mackay
92738533fe
Copter: auto starts only when num cmds > 1
...
num_commands will be 1 when there is no mission because home counts as
the first command
2014-03-19 12:10:30 +09:00
Randy Mackay
f77b2af661
Copter: use common location options masks
2014-03-19 12:10:26 +09:00
Randy Mackay
070cbc9250
Copter: use Mission mav to cmd conversion methods
2014-03-19 12:10:24 +09:00
Randy Mackay
67a4b47f6b
Copter: pass ahrs into mission constructor
2014-03-19 12:10:15 +09:00
Randy Mackay
37fe229ded
Copter: remove unused definitions
2014-03-19 12:10:12 +09:00
Randy Mackay
359f1a27ec
Copter: process cmds from mission lib
2014-03-19 12:10:11 +09:00
Randy Mackay
6e0e672fb2
Copter: log using mission commands
2014-03-19 12:10:09 +09:00
Randy Mackay
43c7310540
Copter: ch7 save wp feature to use ap_mission
2014-03-19 12:10:08 +09:00
Randy Mackay
ffc418dfe3
Copter: add mavlink packet to cmd conversion to GCS_Mavlink.pde
2014-03-19 12:10:06 +09:00
Randy Mackay
9f03e21f81
Copter: remove low-level handling of mission cmds
...
Now handled by AP_Mission
2014-03-19 12:10:04 +09:00
Randy Mackay
5d568502a0
Copter: instantiate AP_Mission object
2014-03-19 12:10:03 +09:00
Randy Mackay
1bad6a4b15
Copter: add AP_Mission object parameter
...
Remove global command_total and command_index parameters
2014-03-19 12:10:01 +09:00
Randy Mackay
0d23c3b910
Copter: initialise vertical speed for Loiter mode
2014-03-17 10:17:57 +09:00
Holger Steinhaus
39df609235
Copter: fixed vertical speed init for ALT_HOLD mode
2014-03-17 10:12:35 +09:00
Andrew Tridgell
43d009e3a5
Copter: set 2nd GPS as secondary
2014-03-08 21:48:18 +11:00
Randy Mackay
9287e28307
Copter: bug fix display of PerfMon log's num long loops
2014-03-08 15:17:03 +09:00
Randy Mackay
54e131cf1f
Copter: re-enable CLI for Pixhawk
2014-03-08 15:17:02 +09:00
Randy Mackay
6efc26d3a6
Copter: restore mount's mode to default after ROI completes
2014-03-05 16:02:14 +09:00
Randy Mackay
7992a1a7d3
Copter: disable the CLI by default
...
This is unfortunate but master's flash size is over the APM2 limit
2014-03-05 12:03:56 +09:00
Randy Mackay
4f963e7795
Copter: move report_compass out of the CLI
...
This function is also used by compassmot. Having it strictly part of
the CLI causes a compile error when the CLI is disabled
2014-03-05 12:01:45 +09:00
Randy Mackay
00f9843e40
Copter: remove CLI tests for gps, logging, radio
...
Required to shrink the firmware down so that it can fit on the APM2
boards
2014-03-05 11:44:09 +09:00
Randy Mackay
fc85228d09
Copter: remove CLI set
...
Frees about 1k of flash
2014-03-04 22:23:57 +09:00
Randy Mackay
3a934357e9
Copter: remove unused reset_land_detector
2014-03-04 22:23:55 +09:00
Randy Mackay
c56f521897
Copter: ch6 tuning of RC_FEEL_RP
2014-03-04 22:23:53 +09:00
Randy Mackay
e89600afe3
Copter: integrate smoothing gain into flight modes
2014-03-04 22:23:52 +09:00
Randy Mackay
3910ab807f
Copter: replace input filtering with smoothing gain
2014-03-04 22:23:50 +09:00
Randy Mackay
429e8d5e50
Copter: integrate AttControl feel param
2014-03-04 22:23:49 +09:00
lthall
a9db399f60
Copter: integrate AttControl input shaping
2014-03-04 21:52:20 +09:00
Andrew Tridgell
86fa82f767
Copter: only send GPS2_RAW when we have a 2nd GPS
2014-03-03 07:05:47 +11:00
Andrew Tridgell
3de574e5dc
Copter: disable GPS2 in HIL
2014-02-27 08:16:20 +11:00
Andrew Tridgell
37394b30ee
Copter: added support for 2nd GPS
2014-02-26 09:40:29 +11:00
Andrew Tridgell
2fcbdc4056
Copter: pass fix type to gps->setHIL()
2014-02-25 21:11:10 +11:00
Andrew Tridgell
ffcc77a21f
Copter: fix for HIL API change
2014-02-23 08:18:20 +11:00
Randy Mackay
d992483bf5
Copter: add EKF params to full param list
2014-02-21 13:51:22 +09:00
Randy Mackay
797212c7ab
Copter: remove remnant of cli compassmot
2014-02-19 16:04:10 +11:00
Randy Mackay
2457dbf0cd
Copter: more checks before starting compassmot
...
additional checks that copter is landed and that compassmot calibration
isn't already being performed.
Returns ACK to ground station as process begins
2014-02-19 16:04:03 +11:00
Andrew Tridgell
76b60a1a52
Copter: added compassmot over MAVLink
...
use the MAVLink interact code to allow for compassmot over MAVLink
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-02-19 16:04:00 +11:00
Andrew Tridgell
a45d77f893
Copter: set the ahrs.set_armed() flag
2014-02-19 10:53:44 +11:00
Andrew Tridgell
0cbe64bc5e
Copter: use Log_Write_Baro()
...
this gives the raw pressure and temperature, which is useful for
analysis, plus allows for more accurate log replay
2014-02-19 09:22:45 +11:00
Randy Mackay
fdae812814
Copter: DO_SET_ROI persists across waypoints
...
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay
bf68edd01c
Copter: bug fix to 50hz logging rate
...
Caught by Emile Castelnuovo
2014-02-17 22:25:02 +09:00
Randy Mackay
d9b7559379
Copter: remove duplicate #define from APM_Config.h
2014-02-17 16:44:47 +09:00
Randy Mackay
4e1c51aa65
Copter: bug to disarm at end of mission
2014-02-17 16:43:49 +09:00
Andrew Tridgell
ce66314f40
Copter: fixed HIL build on PX4
2014-02-17 12:34:34 +11:00
proficnc
bbf5c11c8a
Update Parameters.pde
...
Moved Disabled to the bottom of the drop-down box for selecting logging types.
This is to reduce the potential for someone to accidentally select Disabled when they intend on selecting Default.
2014-02-17 10:02:45 +11:00
Randy Mackay
00913ffe1b
Copter: throttle rate to simple P controller
...
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay
9444ba7ea8
TradHeli: init roll/pitch input filter
2014-02-16 13:35:33 +11:00
Randy Mackay
b259510095
Copter: init roll/pitch input filters
2014-02-16 13:35:30 +11:00
Andrew Tridgell
9c66dd0d2c
Copter: change to Compass::learn_offsets
2014-02-16 13:22:13 +11:00
Randy Mackay
aab9b30bf6
Copter: replace APM_PI with AC_P
...
Saves about 90bytes of RAM
2014-02-15 06:09:08 +11:00
Randy Mackay
3f10a84a2a
Copter: remove accel calibration from cli
...
Also remove compass, flight mode, optical flow, radio and ch6 tuning
knob setup from cli to free up 3.5k of flash
2014-02-15 06:09:08 +11:00
Randy Mackay
3ccd1ad170
Copter: integrate AttControl method name changes
2014-02-15 06:09:08 +11:00
Randy Mackay
6880a6db80
TradHeli: integrate AttControl method name changes
2014-02-15 06:09:08 +11:00
lthall
7ed5080dc9
Copter: simplify get_angle_targets_for_reporting
2014-02-15 06:09:08 +11:00
lthall
41dcfae7c0
AC Acro and Sport: Angle limit code update
2014-02-15 06:09:08 +11:00
Andrew Tridgell
ebf6d47830
Copter: disable direct tuning, we need accessors for this
2014-02-15 05:48:24 +11:00
Andrew Tridgell
2fbdf7f718
Copter: fixed build for AHRS API changes
2014-02-15 05:48:22 +11:00
Andrew Tridgell
a8dc1be4de
Copter: fixed non-EKF copter build
2014-02-15 05:48:21 +11:00
Randy Mackay
20989fd5e9
Copter: allow ch6 tuning of EKF
2014-02-15 05:48:20 +11:00
Andrew Tridgell
86afd13f12
Copter: use GPS AIRBORNE_4G
2014-02-15 05:48:17 +11:00
Andrew Tridgell
a112694a50
Copter: added AUX switch option for enable/disable EKF
2014-02-15 05:48:17 +11:00
Andrew Tridgell
5606e2f4a7
Copter: enabled EKF and SIMSTATE flash logging
2014-02-15 05:48:16 +11:00
Andrew Tridgell
6a9189a6a5
Copter: enable AHRS2 mavlink message
2014-02-15 05:48:16 +11:00
Andrew Tridgell
99b3517a47
Copter: use AP_InertialNav_NavEKF when available
2014-02-15 05:48:15 +11:00
Andrew Tridgell
686d1b9124
Copter: changes set_home_position() to setup_home_position() for Inav
2014-02-15 05:48:15 +11:00
Andrew Tridgell
c6e25483b4
Copter: use a common home with AHRS
2014-02-15 05:48:15 +11:00
Andrew Tridgell
9cc00d20eb
Copter: fixed for removed DCM blowup counts
2014-02-15 05:29:48 +11:00
Andrew Tridgell
79a29d12f2
Copter: fixed build for new AHRS API
2014-02-15 05:29:47 +11:00
Andrew Tridgell
af5a3dff93
Copter: enable use of AHRS_NavEKF
2014-02-15 05:29:47 +11:00
Andrew Tridgell
24f2ac20de
Copter: removed HIL_MODE_ATTITUDE
...
this really can't work any more, as AHRS can't support it
2014-02-15 05:29:46 +11:00
Andrew Tridgell
644bf71f56
Copter: fixed build for InertialNav change
2014-02-15 05:29:46 +11:00
Randy Mackay
006cf58b2d
Copter: fix merge error for g.angle_max
2014-02-15 05:27:51 +11:00
Randy Mackay
5e8fede19e
Copter: comment fix to Attitude.pde
2014-02-15 05:27:50 +11:00
Randy Mackay
aa79e22ce0
Drift: bug fix for throttle
2014-02-15 05:27:50 +11:00
Randy Mackay
10a0303706
Copter: smooth throttle transition between flight modes
2014-02-15 05:27:50 +11:00
Randy Mackay
0df1dc267b
Copter: integrate WPNav constructor change
2014-02-15 05:27:50 +11:00
Randy Mackay
1b8055aed9
Copter: remove unused t7 const
...
Saves 4 bytes
2014-02-15 05:27:49 +11:00
Randy Mackay
2b3995ccb5
Copter: integrate refs for RC_Channels in motor defs
2014-02-15 05:27:49 +11:00
Randy Mackay
9f78f65413
TradHeli: integrate leonard's control_acro fixes
2014-02-15 05:27:49 +11:00
Randy Mackay
bf6bb59cb4
Copter: Leonard's control_acro fixes
...
get_pilot_desired_angle_rates returns bf rate targets as floats
2014-02-15 05:27:49 +11:00
Randy Mackay
6380a39d3a
Copter: remote update_trig from main code
2014-02-15 05:27:48 +11:00
Randy Mackay
75b20bde7c
Copter: control_acro, drift use trig from ahrs
2014-02-15 05:27:48 +11:00
Randy Mackay
aa4c3eaffe
Copter: resolve RTL state compiler warnings
2014-02-15 05:27:48 +11:00
Randy Mackay
12a4ce70fd
Copter: remove control_roll, pitch, yaw variables
2014-02-15 05:27:47 +11:00
Randy Mackay
2c1ec9d0c0
Copter: remove control_roll, pitch, yaw from control files
2014-02-15 05:27:47 +11:00
Randy Mackay
e8c4e8a472
Copter: integrate get_angle_target_for_reporting
...
Used for logging and sending to GCS
2014-02-15 05:27:47 +11:00
Randy Mackay
d579325e2a
Copter: add get_angle_targets_for_reporting
...
This returns the current earth frame roll, pitch and yaw targets which
can depend upon the flight mode
2014-02-15 05:27:47 +11:00
Randy Mackay
1acd33e290
Copter: do_yaw takes yaw target from AttControl
2014-02-15 05:27:47 +11:00
Randy Mackay
ea1158a9d5
Copter: remove unused config
2014-02-15 05:27:47 +11:00
Randy Mackay
9ef3fd850f
Copter: remove use of SUPER_SIMPLE definition
2014-02-15 05:27:47 +11:00
Randy Mackay
b37b0c5061
TradHeli: remove use of throttle_mode
2014-02-15 05:27:47 +11:00
Randy Mackay
b0673d693b
Copter: move set_mode, to flight_mode.pde
2014-02-15 05:27:47 +11:00
Randy Mackay
b8bb477731
Copter: add flight_mode.pde
2014-02-15 05:27:47 +11:00
Randy Mackay
38d5148b99
Copter: remove reset_I_all
...
Each controller should reset the I terms as needed
2014-02-15 05:27:47 +11:00
Randy Mackay
72a3f14561
Copter: move reset_optflow_I to control_ofloiter
2014-02-15 05:27:46 +11:00
Randy Mackay
7afa0a767c
Copter: correct circle rate tuning to use circle_nav
2014-02-15 05:27:46 +11:00
Randy Mackay
3e399fd830
Copter: remove unused parameters
2014-02-15 05:27:46 +11:00
Randy Mackay
81c7df7678
Copter: comment fix
2014-02-15 05:27:46 +11:00
Randy Mackay
0e0d02cd6d
Copter: remove unused init from sport mode
2014-02-15 05:27:46 +11:00
Randy Mackay
3d926a6943
Copter: GCS_Mavlink gets gyro direct from imu
2014-02-15 05:27:46 +11:00
Randy Mackay
f46ff2b44e
Copter: remove unused defines
2014-02-15 05:27:46 +11:00
Randy Mackay
fe26af86de
Copter: crash check works with flip flight mode
2014-02-15 05:27:46 +11:00
Randy Mackay
22280e1c57
Copter: integrate surface_tracking to control_althold
2014-02-15 05:27:46 +11:00
Randy Mackay
3824f528ea
Copter: get angle_boost direct from pos_control
2014-02-15 05:27:46 +11:00
Randy Mackay
90c5fe4be4
Copter: surface_tracking takes current_alt_target param
2014-02-15 05:27:46 +11:00
Randy Mackay
989a03a643
Copter: remove unused flags and variables
2014-02-15 05:27:45 +11:00
Randy Mackay
174318a2a9
Copter: remove set_nav_mode
2014-02-15 05:27:45 +11:00
Randy Mackay
aedb4136de
Copter: update_thr_cruise removed from control_stabilize
2014-02-15 05:27:45 +11:00
Randy Mackay
223c6fd4de
Copter: remove deadwood, update_thr_cruise always runs
2014-02-15 05:27:45 +11:00
Randy Mackay
2870d043f8
Copter: remove unused drift.pde
...
moved to control_drift.pde
2014-02-15 05:27:45 +11:00
Randy Mackay
1cd678f684
Copter: compiler warning for control_autotune
2014-02-15 05:27:45 +11:00
Randy Mackay
d3a126d078
Copter: integrate slew_yaw into control_auto
2014-02-15 05:27:45 +11:00
Randy Mackay
364946cb7f
Copter: AttControl param prefix shortened to ATC
2014-02-15 05:27:45 +11:00
Randy Mackay
814157324d
Copter: APM_Config AUTOTUNE_ENABLED
2014-02-15 05:27:45 +11:00
Randy Mackay
89a50ed445
Copter: comment fix for control_stabilize
2014-02-15 05:27:45 +11:00
Randy Mackay
0107b2a95d
Copter: remove unused auto_tune.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
aec67cd3df
Copter: integrate control_autotune
2014-02-15 05:27:44 +11:00
Randy Mackay
823485f763
Copter: add control_autotune.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
b87852ee2e
Copter: remove unused flip.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
d90d3d8dca
Copter: integrate control_flip
2014-02-15 05:27:44 +11:00
Randy Mackay
47deb795bd
Copter: add control_flip
2014-02-15 05:27:44 +11:00
Randy Mackay
1648ecc6e5
Copter: bug fix for heli_control_acro throttle
2014-02-15 05:27:44 +11:00
Randy Mackay
c73c9f03a5
Copter: bug fix for control_acro throttle
2014-02-15 05:27:44 +11:00
Randy Mackay
164bd10ef0
TradHeli: init targets when entering acro
2014-02-15 05:27:44 +11:00
Randy Mackay
fdf41219ca
Copter: init targets when entering acro
2014-02-15 05:27:44 +11:00
Randy Mackay
9f33873b2e
Copter: typo in control_acro.pde
2014-02-15 05:27:44 +11:00
Randy Mackay
ec989c720c
Copter: integrate heli_control_acro
2014-02-15 05:27:43 +11:00
Randy Mackay
5aaa01ab30
TradHeli: heli_control_acro
2014-02-15 05:27:43 +11:00
Randy Mackay
922dff0514
Copter: integrate heli_control_stabilize
2014-02-15 05:27:43 +11:00
Randy Mackay
41ab2547d7
Copter: control_stabilize remove takeoff_complete
2014-02-15 05:27:43 +11:00
Randy Mackay
bca309eb1e
Copter: replace takeoff_complete with landed_complete
2014-02-15 05:27:43 +11:00
Randy Mackay
2940688301
TradHeli: heli_control_stabilize
2014-02-15 05:27:43 +11:00
Randy Mackay
91124bcf8b
TradHeli: remove get_heli_rate_yaw from main code
2014-02-15 05:27:43 +11:00
Randy Mackay
3b0de0d23d
Copter: integrate trad heli AttControl
2014-02-15 05:27:43 +11:00
Randy Mackay
ef666c73ab
Copter: remove Position mode
2014-02-15 05:27:42 +11:00
Randy Mackay
c632211c8c
Copter: get_of_roll, get_of_pitch moved to control_ofloiter
2014-02-15 05:27:42 +11:00
Randy Mackay
837061fd65
Copter: control_ofloiter added
2014-02-15 05:27:42 +11:00
Robert Lefebvre
c561d6bb9e
Small comment change.
2014-02-15 05:27:42 +11:00
Randy Mackay
54be8402a2
Copter: integrate control_guided
2014-02-15 05:27:42 +11:00
Randy Mackay
798add0b5c
Copter: remove guided from control_auto.pde
2014-02-15 05:27:42 +11:00
Randy Mackay
0e41b01ad0
Copter: control_guided added
2014-02-15 05:27:41 +11:00
Randy Mackay
245bcd7c2c
Copter: removed althold, drift, sport from control_stabilize
2014-02-15 05:27:41 +11:00
Randy Mackay
d85c57999d
Copter: althold moved to control_althold.pde
2014-02-15 05:27:41 +11:00
Randy Mackay
2e6327be06
Copter: sport moved to control_sport.pde
2014-02-15 05:27:41 +11:00
Randy Mackay
70c8b622e2
Copter: drift moved to control_drift
2014-02-15 05:27:41 +11:00
Randy Mackay
212ced63f6
Copter: bug fix for do_loiter_time alt target
2014-02-15 05:27:41 +11:00
Randy Mackay
37bde3406d
Copter: remove comments
2014-02-15 05:27:41 +11:00