Andrew Tridgell
dbff6cab43
HAL_Linux: added udp example to help
2015-06-03 21:47:01 +10:00
Paul Riseborough
d3f83e8ec6
AP_NavEKF: Improve gyro bias learning rate for plane and rover
...
This patch increases initial gyro bias uncertainty and plane and rover specific process noise to improve the rate of gyro bias learning.
This reduces the likelihood of a navigation failure due to rapid temperature changes in the inertial sensors causing rapid changes in zero rate offset.
The increase in process noise cannot be applied to Copter due to different numerical stability limits arising from the faster update rate.
2015-06-03 11:46:17 +10:00
Andrew Tridgell
367a87591a
AP_Param: fixed build of eedump_apparam
2015-06-03 11:46:00 +10:00
Andrew Tridgell
9a7b283322
AP_GPS: fixed enable of RXM_RAW on uBlox on Pixhawk
...
if version detection was disabled this would never trigger
2015-06-02 16:52:08 +10:00
Grant Morphett
7d1bf75aa8
DataFlash: Moving parameter logging to be after all systems have started
...
Moved Log_Write_Parameters to be public so we can call it from the
vehcile code at the end of the startup sequence.
We needed to do this because parameters like COMPASS_EXTERNAL are
modified by the startup code and if we log the parameters too early we
will be recording the wrong value.
2015-06-01 20:22:43 +09:00
Randy Mackay
9c28d61a5c
Mission: protect against endless loops of do-commands
2015-06-01 18:11:54 +09:00
Andrew Tridgell
e234844905
RC_Channel: fixed example sketch
2015-06-01 18:05:50 +10:00
Andrew Tridgell
767aeedf01
AP_Mission: fixed example sketch
2015-06-01 18:05:38 +10:00
Andrew Tridgell
b2a5de8a63
AP_Scheduler: fixed example sketch
2015-06-01 17:42:32 +10:00
Andrew Tridgell
214b61bfc0
AP_InertialSensor: fixed example build
2015-06-01 17:35:15 +10:00
Andrew Tridgell
3edac37929
AP_Math: removed unused include in example
2015-06-01 17:35:03 +10:00
Andrew Tridgell
407fbc7261
AP_Menu: remove unused AP_Vehicle.h include
2015-06-01 17:34:48 +10:00
Andrew Tridgell
9fa1e15238
AP_Menu: removed example sketch
...
not very useful
2015-06-01 17:34:34 +10:00
Andrew Tridgell
5c86005160
AP_HAL: removed spurious delay example
2015-06-01 17:28:45 +10:00
Andrew Tridgell
1bd61ae96e
AP_HAL: no need to include AP_Vehicle_Type.h here any more
2015-06-01 17:28:24 +10:00
Andrew Tridgell
d746e8fa29
AP_Motors: mark examples as nobuild
...
waiting for fix from Rob
2015-06-01 17:27:33 +10:00
Andrew Tridgell
7f408cae02
AP_PerfMon: convert example from .pde to .cpp
2015-06-01 17:07:09 +10:00
Andrew Tridgell
421c7e02ae
StorageManager: convert example from .pde to .cpp
2015-06-01 17:07:08 +10:00
Andrew Tridgell
6c1c2dd8bd
RC_Channel: convert example from .pde to .cpp
2015-06-01 17:07:08 +10:00
Andrew Tridgell
fce95178e7
PID: convert example from .pde to .cpp
2015-06-01 17:07:08 +10:00
Andrew Tridgell
3b48f68cce
GCS_MAVLink: convert example from .pde to .cpp
2015-06-01 17:07:07 +10:00
Andrew Tridgell
89c4e6fc21
GCS_Console: convert example from .pde to .cpp
2015-06-01 17:07:07 +10:00
Andrew Tridgell
b7f0735c2b
Filter: convert example from .pde to .cpp
2015-06-01 17:07:07 +10:00
Andrew Tridgell
e734f24cc1
DataFlash: convert example from .pde to .cpp
2015-06-01 17:07:07 +10:00
Andrew Tridgell
ae4cfe3f2f
AP_Scheduler: convert example from .pde to .cpp
2015-06-01 17:07:06 +10:00
Andrew Tridgell
b2fb2c676e
AP_RangeFinder: convert example from .pde to .cpp
2015-06-01 17:07:06 +10:00
Andrew Tridgell
330d8f5c3a
AP_Parachute: convert example from .pde to .cpp
2015-06-01 17:07:06 +10:00
Andrew Tridgell
637f8430c9
AP_OpticalFlow: convert example from .pde to .cpp
2015-06-01 17:07:06 +10:00
Andrew Tridgell
24e2e4b35e
AP_Notify: convert example from .pde to .cpp
2015-06-01 17:07:05 +10:00
Andrew Tridgell
83b46243db
AP_Mount: convert example from .pde to .cpp
2015-06-01 17:07:05 +10:00
Andrew Tridgell
89baf2bdf1
AP_Motors: convert example from .pde to .cpp
2015-06-01 17:07:05 +10:00
Andrew Tridgell
d1ed4c863c
AP_Mission: convert example from .pde to .cpp
2015-06-01 17:07:04 +10:00
Andrew Tridgell
4d040bbb94
AP_Math: convert example from .pde to .cpp
2015-06-01 17:07:04 +10:00
Andrew Tridgell
7f7113c1de
AP_InertialSensor: convert example from .pde to .cpp
2015-06-01 17:07:04 +10:00
Andrew Tridgell
ca8482b4d6
AP_HAL_PX4: convert example from .pde to .cpp
2015-06-01 17:07:04 +10:00
Andrew Tridgell
dd10cbc976
AP_HAL_Linux: convert example from .pde to .cpp
2015-06-01 17:03:44 +10:00
Andrew Tridgell
f9aa1d1a8b
AP_HAL_FLYMAPLE: convert example from .pde to .cpp
2015-06-01 17:03:44 +10:00
Andrew Tridgell
36b19b26ce
AP_HAL: convert example from .pde to .cpp
2015-06-01 17:03:40 +10:00
Andrew Tridgell
379b130d0a
AP_HAL_Empty: convert example from .pde to .cpp
2015-06-01 17:03:37 +10:00
Andrew Tridgell
0cc31c2db5
AP_HAL_AVR: convert example from .pde to .cpp
2015-06-01 17:03:37 +10:00
Andrew Tridgell
e18a2df64e
AP_GPS: convert example from .pde to .cpp
2015-06-01 16:58:11 +10:00
Andrew Tridgell
7320a35ad2
AP_GPS: convert example from .pde to .cpp
2015-06-01 16:58:11 +10:00
Andrew Tridgell
c18c84fbe1
AP_Declination: convert example from .pde to .cpp
2015-06-01 16:58:11 +10:00
Andrew Tridgell
d6a1bd98e6
AP_Compass: convert example from .pde to .cpp
2015-06-01 16:58:11 +10:00
Andrew Tridgell
191cdb8bc1
AP_Common: convert example from .pde to .cpp
2015-06-01 16:58:11 +10:00
Andrew Tridgell
debe7db861
AP_BattMonitor: convert example from .pde to .cpp
2015-06-01 16:58:11 +10:00
Andrew Tridgell
4368f922a3
AP_Baro: convert example from .pde to .cpp
2015-06-01 16:58:10 +10:00
Andrew Tridgell
e66b56970e
AP_Airspeed: convert example from .pde to .cpp
2015-06-01 16:58:10 +10:00
Andrew Tridgell
edab50ab5a
AP_AHRS: convert example from .pde to .cpp
2015-06-01 16:58:10 +10:00
Andrew Tridgell
0cfdb9af8a
AP_ADC: convert example from .pde to .cpp
2015-06-01 16:58:10 +10:00
Andrew Tridgell
a62c450f86
AC_PID: convert example from .pde to .cpp
2015-06-01 16:58:10 +10:00
Andrew Tridgell
2b828a794e
AP_Math: fixed example build
2015-06-01 16:36:54 +10:00
Andrew Tridgell
04ba5fa0bd
AP_AHRS: pass EKF into constructor
...
this makes it possible for var_info in vehicle code to be in text
segment
2015-06-01 16:16:24 +10:00
Andrew Tridgell
f50ee4c44c
GCS_MAVLink: all vehicles now use functors
2015-06-01 15:18:33 +10:00
Andrew Tridgell
9379e79489
DataFlash: all vehicles now use functors
2015-06-01 15:18:32 +10:00
Andrew Tridgell
f24e69f4a0
AP_Vehicle: all vehicles now use functors
2015-06-01 15:18:32 +10:00
Andrew Tridgell
dd691ae75c
AP_Scheduler: all vehicles now use functors
2015-06-01 15:18:31 +10:00
Andrew Tridgell
ec2d429513
AP_Mission: all vehicles now use functors
2015-06-01 15:18:31 +10:00
Andrew Tridgell
bd5a58e4c4
AP_Menu: all vehicles now use functors
2015-06-01 15:18:31 +10:00
Andrew Tridgell
4dd47ead0e
AP_HAL: removed old fastdelegate code
2015-06-01 15:18:30 +10:00
Andrew Tridgell
9ed0ee12fb
AP_Vehicle: all vehicle types now use functors
2015-06-01 15:06:31 +10:00
Andrew Tridgell
96737a3982
SITL: fixed yaw wrap in simulated AntennaTracker
2015-06-01 14:08:45 +10:00
Andrew Tridgell
d57eca9de8
HAL_SITL: enable simulated antenna tracker
2015-06-01 12:53:50 +10:00
Andrew Tridgell
edb54cabb5
SITL: added simulated antenna tracker
2015-06-01 12:53:30 +10:00
Andrew Tridgell
14bdfe2889
SITL: started to use C++11 variable initialisation
2015-06-01 08:04:51 +10:00
Andrew Tridgell
b541bfb739
SITL: fixed build warnings
2015-05-30 22:51:38 +10:00
Andrew Tridgell
d5da9fcca6
AP_NavEKF: fixed build warnings
2015-05-30 22:51:30 +10:00
Andrew Tridgell
6a2c585632
AP_InertialSensor: fixed build warnings
2015-05-30 22:51:19 +10:00
Andrew Tridgell
ac3fc2f373
AP_HAL: fixed build warnings
2015-05-30 22:51:09 +10:00
Andrew Tridgell
084521243e
AP_GPS: fixed some build warnings
2015-05-30 22:51:00 +10:00
Andrew Tridgell
249b339e6c
HAL_SITL: fixed a build warning
2015-05-30 22:16:37 +10:00
Andrew Tridgell
73445fdae9
DataFlash: added error checking and fixed a warning
2015-05-30 22:16:22 +10:00
Andrew Tridgell
1088e72fda
AP_Vehicle: make copter use functors
2015-05-30 15:21:22 +09:00
Robert Lefebvre
1424b17a83
AP_Motors_Heli: Change default RSC_SETPOINT to 700
2015-05-29 17:46:25 +09:00
Robert Lefebvre
4da54783fd
AC_AttitudeControl_Heli: Semantic Change. Motor Runup to Rotor Runup.
2015-05-29 17:46:23 +09:00
Robert Lefebvre
d24664ccf9
AP_MotorsHeli: Semantic change. Motor Runup to Rotor Runup
2015-05-29 17:46:18 +09:00
Robert Lefebvre
65ca09600c
AP_Motors: Heli eliminate _dt member and fix rsc_runup calculation
2015-05-29 17:46:09 +09:00
Robert Lefebvre
18bac524a3
Copter: TradHeli, change Rate FF LPF to 10Hz
2015-05-29 17:46:05 +09:00
Andrew Tridgell
f39063e023
DataFlash: don't do PID logging on APM2
2015-05-29 16:32:05 +10:00
Randy Mackay
19b021f729
RCMap: added RebootRequired param description
2015-05-28 19:32:38 +09:00
svefro
b02bbcd289
RCMap: added Reboot required to rcmap parameter descriptions
...
Added Reboot required to rcmap throttle, yaw, pitch, roll
2015-05-28 19:32:20 +09:00
Andrew Tridgell
b6eba0842a
DataFlash: fixed CAM message format
2015-05-27 22:10:39 +10:00
Andrew Tridgell
00ca493860
AP_AHRS: prevent a floating exception in update_trig
2015-05-27 22:10:39 +10:00
Randy Mackay
b121d83beb
RC_Channel: add EPM, LandingGear to FUNCTION param description
2015-05-27 18:05:01 +09:00
Andrew Tridgell
8454246fae
AP_Param: make it safe to change the type of a parameter
...
if the type is changed then the value will revert to its default value
2015-05-27 15:29:40 +10:00
Andrew Tridgell
95ff71940c
DataFlash: fixed rebase errors
2015-05-27 14:28:50 +10:00
Andrew Tridgell
8f34ed5b76
DataFlash: added PIDA message
...
for logging Z accel PID in copter
2015-05-27 14:28:50 +10:00
Andrew Tridgell
a57889e3b0
GCS_MAVLink: re-generate headers
2015-05-27 14:28:49 +10:00
Andrew Tridgell
0ed7fda41d
GCS_MAVLink: added ACCZ and STEER PID_TUNING axes
2015-05-27 14:28:49 +10:00
Andrew Tridgell
521dae1c65
AC_AttitudeControl: use set_desired_rate() on PID controllers
...
this sets them up for logging of PIDs
2015-05-27 14:28:49 +10:00
Andrew Tridgell
3ec8857fbc
AC_PID: added set_desired_rate() interface
...
used to setup _pid_info for logging
2015-05-27 14:28:48 +10:00
Andrew Tridgell
6000bb0c32
AC_PID: log desired rate for VFF as well as AFF
2015-05-27 14:28:48 +10:00
Andrew Tridgell
b45ab52015
DataFlash: added desired rate to PID logging
2015-05-27 14:28:48 +10:00
Andrew Tridgell
86a3bca88c
APM_Control: added FF parameters to roll and pitch controllers
...
these are much easier to tune with the new PID_TUNING messages
2015-05-27 14:28:47 +10:00
Robert Lefebvre
353879cd2b
AC_AttitudeControl_Heli: Add Rate Accel FF to Yaw control
2015-05-27 14:28:47 +10:00
Robert Lefebvre
366f87c91c
AC_HELI_PID: Add Acceleration FF method.
2015-05-27 14:28:47 +10:00
Robert Lefebvre
7ab628521e
DataFlash: Add Acceleration Feedforward to PID_Info.
2015-05-27 14:28:47 +10:00
Robert Lefebvre
810b12a1ac
AC_AttitudeControlHeli: Change Rate Yaw FF LPF from 5Hz to 10Hz.
2015-05-27 14:28:46 +10:00
Andrew Tridgell
e79a21d8c2
AC_PID: fill in desired rate for heli PID
2015-05-27 14:28:46 +10:00
Andrew Tridgell
d148c38f68
DataFlash: added desired rate to PID_Info
2015-05-27 14:28:45 +10:00
Andrew Tridgell
0fe04a93ce
GCS_MAVLink: rebuilt headers
2015-05-27 14:28:45 +10:00
Andrew Tridgell
cc80fdf593
GCS_MAVLink: added PID_TUNING message
2015-05-27 14:28:45 +10:00
Andrew Tridgell
216a78a9f0
APM_Control: added get_pid_info() interface
2015-05-27 14:28:44 +10:00
Robert Lefebvre
23adf2773c
AC_AttitudeControl: Remove To-Do comments for Attitude Rate logging.
2015-05-27 14:28:44 +10:00
Robert Lefebvre
967071ca62
AC_PID: Integrate PID Logging functionality.
2015-05-27 14:28:44 +10:00
Robert Lefebvre
753be18c17
DataFlash: Add PID Logging Method
2015-05-27 14:28:44 +10:00
Andrew Tridgell
d8df31c023
SITL: initialise a couple of variables to prevent a valgrind error
2015-05-27 11:54:18 +10:00
Andrew Tridgell
2a22ae5404
DataFlash: support 64 bit TimeUS log dumping
2015-05-27 11:54:18 +10:00
Andrew Tridgell
1400d0155c
AP_Mount: fixed valgrind error with gimbal code
2015-05-27 11:54:17 +10:00
Andrew Tridgell
4705be97bf
AP_HAL: support %lld and %llu in internal printf
...
useful for log messages with 64 bit timestamps
2015-05-27 11:54:17 +10:00
Peter Barker
8be9e99fad
AP_InertialSensor_PX4: 64-bit timestamps for ACCx and GYRx messages
2015-05-27 11:54:17 +10:00
Peter Barker
988f3277de
DataFlash: 64-bit timestamps for ACCx and GYRx messages
2015-05-27 11:54:17 +10:00
Peter Barker
f489f6b696
AP_InertialSensor: use 64-bit timestamps in dataflash logs
2015-05-27 11:54:17 +10:00
Peter Barker
9ae85ed9ab
APM_Control/AP_AutoTune: use 64-bit timestamps for dataflash logs
2015-05-27 11:54:17 +10:00
Peter Barker
457f77314e
AP_TECS: use 64-bit timestamps for dataflash logs
2015-05-27 11:54:16 +10:00
Peter Barker
feb85ef7d5
AP_GPS: unused SBP struct gets 64-bit timestamp
2015-05-27 11:54:16 +10:00
Peter Barker
4d67ccb338
AP_GPS: use 64-bit timestamps for dataflash logs
2015-05-27 11:54:16 +10:00
Peter Barker
9e0b5910e2
AP_Terrain: use 64-bit timestamps for dataflash logs
2015-05-27 11:54:16 +10:00
Peter Barker
88015503ac
SITL: use 64-bit timestamps for dataflash logs
2015-05-27 11:54:16 +10:00
Peter Barker
617043f468
DataFlash: convert GPS and CAM dataflash messages to 64-bit timestamps
...
GPS structures remove 32-bit apm_time and replace with standard time_us
Significant change to GPS and GPS2 messages:
Add TimeUS as first field
Remove T field
Due to length restrictions on labels:
Renamed TimeMS to GMS (Gps MilliSeconds)
Renamed Week to GWk (Gps WeeK)
Renamed RelAlt to RAlt
Significant change to CAM messages:
Removed GPSTime (uin32_t), added TimeUS (uint64_t)
2015-05-27 11:54:15 +10:00
Peter Barker
769982b8f2
DataFlash: use 64-bit timestamps for dataflash logs
2015-05-27 11:54:14 +10:00
Randy Mackay
114c4f4077
AP_Match: fix example sketch
2015-05-27 09:47:24 +09:00
Randy Mackay
fb2d29364e
Mount_SToRM32_serial: fix angle request
2015-05-26 21:05:29 +09:00
Randy Mackay
9b04a67e63
Mount_SToRM32_serial: rename sent_do_mount_control
2015-05-26 21:05:26 +09:00
Randy Mackay
72eb25b166
Mount: add SToRM32 serial to front end
2015-05-26 21:05:24 +09:00
Sergey Kirillov
c133511431
Mount: add SToRM32 serial support
2015-05-26 21:05:22 +09:00
Sergey Kirillov
69959a4214
SerialManager: add SToRM32 serial enum and baudrates
2015-05-26 21:05:19 +09:00
Andrew Tridgell
c7044c4f91
AP_Terrain: make terrain request times per channel
...
otherwise we can miss sending one if we send first to a channel not
being listened to
2015-05-26 17:27:51 +10:00
Andrew Tridgell
3a9d7363ea
HAL_VRBRain: fixed functor comparison
2015-05-26 15:17:06 +10:00
Andrew Tridgell
e589ca9b80
HAL_Flymaple: fixed functor comparison
2015-05-26 15:16:51 +10:00
Andrew Tridgell
7e264b44df
HAL_Linux: fixed functor comparison
2015-05-26 15:14:50 +10:00
Andrew Tridgell
96b921d4cc
AP_Scheduler: fixed example build
2015-05-26 14:37:14 +10:00
Andrew Tridgell
4fdfa47ca3
GCS_MAVLink: removed BUILD_DELEGATES code
...
no longer needed
2015-05-26 14:35:12 +10:00
Andrew Tridgell
8624a262e7
DataFlash: removed BUILD_DELEGATES code
...
no longer needed
2015-05-26 14:35:04 +10:00
Andrew Tridgell
83e6181024
AP_Vehicle: removed BUILD_DELEGATES code
...
no longer needed
2015-05-26 14:34:58 +10:00
Andrew Tridgell
e3f8e22fc6
AP_Mission: removed BUILD_DELEGATES code
...
no longer needed
2015-05-26 14:34:51 +10:00
Andrew Tridgell
85f87b6d9c
AP_Menu: removed BUILD_DELEGATES code
...
no longer needed
2015-05-26 14:34:47 +10:00
Andrew Tridgell
1a2b02a563
AP_HAL: removed AVR special case
...
no longer needed
2015-05-26 14:34:13 +10:00
Andrew Tridgell
7db9da6545
AP_Scheduler: removed delegate ptr handling
...
no longer needed
2015-05-26 14:33:30 +10:00
Andrew Tridgell
edc21cfa38
AP_Compass: make having no compass backends non-fatal
...
thanks to Daniel for spotting this
2015-05-26 14:23:40 +10:00
Andrew Tridgell
43fb1202f2
HAL_PX4: fixed functor comparison with NULL
2015-05-26 13:54:38 +10:00
Lucas De Marchi
0daeeb9518
ArduPlane: Start using new Functor implementation
...
It both reduces flash size and move symbols to read-only sections.
The scheduler_tasks table is one known not to be in read-only section before due
to the FastDelegate implementation. Before and after this patch:
ArduPlane $ size ArduPlane.elf{.old,}
text data bss dec hex filename
733368 8252 67352 808972 c580c ArduPlane.elf.old
730632 8236 64792 803660 c434c ArduPlane.elf
ArduPlane $ nm -C ArduPlane.elf.old|grep scheduler_tasks
0000000000402800 t _GLOBAL__sub_I__ZN5Plane15scheduler_tasksE
00000000006b54c0 B Plane::scheduler_tasks
ArduPlane $ nm -C ArduPlane.elf|grep scheduler_tasks
0000000000490900 R Plane::scheduler_tasks
As can be seen above, now the scheduler_tasks symbol is in a read-only data
section and in all of them we decreased the total size.
For APM2 we have a little increase in the text size size.
ArduPlane $ size ArduPlane.elf{.old,}
text data bss dec hex filename
241940 942 4447 247329 3c621 ArduPlane.elf.old
242222 942 4431 247595 3c72b ArduPlane.elf
ArduPlane $ nm -C ArduPlane.elf.old|grep scheduler_tasks
00001f8f T Plane::scheduler_tasks
ArduPlane $ nm -C ArduPlane.elf|grep scheduler_tasks
00001f8f T Plane::scheduler_tasks
2015-05-26 13:46:55 +10:00
Lucas De Marchi
84f399ec3c
APMrover2: Start using new Functor implementation
...
It both reduces flash size and move symbols to read-only sections.
The scheduler_tasks table is one known not to be in read-only section before due
to the FastDelegate implementation. Before and after this patch:
APMrover2 $ size APMrover2.elf{.old,}
text data bss dec hex filename
611406 4832 40920 657158 a0706 APMrover2.elf.old
609686 4824 38936 653446 9f886 APMrover2.elf
APMrover2 $ nm -C APMrover2.elf{.old,} |grep tasks
0000000000696f80 B Rover::scheduler_tasks
000000000047c440 R Rover::scheduler_tasks
As can be seen above, now the scheduler_tasks symbol is in a read-only data
section and in all of them we decreased the total size.
For APM2 we have a similar situation, but the table was already in text section
because it was using plain C pointers:
APMrover2 $ size APMrover2.elf{.old,}
text data bss dec hex filename
189518 1038 3494 194050 2f602 APMrover2.elf.old
189216 1038 3480 193734 2f4c6 APMrover2.elf
APMrover2 $ nm -C APMrover2.elf{.old,} |grep tasks
00001f92 T Rover::scheduler_tasks
00001f8a T Rover::scheduler_tasks
2015-05-26 13:46:55 +10:00
Lucas De Marchi
20ef7efaf6
AP_HAL: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:55 +10:00
Lucas De Marchi
c894a1349e
DataFlash: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:54 +10:00
Lucas De Marchi
6ae2591cad
AP_Terrain: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:54 +10:00
Lucas De Marchi
9764bb2452
AP_Notify: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:54 +10:00
Lucas De Marchi
3aa46e3213
AP_InertialSensor: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:53 +10:00
Lucas De Marchi
4c97d92982
AP_HAL_Linux: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:53 +10:00
Lucas De Marchi
9b7c1d8f93
AP_HAL_FLYMAPLE: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:53 +10:00
Lucas De Marchi
dcf992b558
AP_HAL_AVR: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:53 +10:00
Lucas De Marchi
435613de69
AP_Frsky_Telem: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:53 +10:00
Lucas De Marchi
95627cf412
AP_Compass: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:52 +10:00
Lucas De Marchi
df5652fa87
AP_Baro: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:52 +10:00
Lucas De Marchi
ca7db5cdc1
AP_Arming: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:52 +10:00
Lucas De Marchi
cc1fbddc95
AP_Airspeed: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:52 +10:00
Lucas De Marchi
f7dc19554f
AP_ADC: use functor macros
...
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:51 +10:00
Lucas De Marchi
9f0af5b9cb
AP_HAL: add fallback implementation of functor macros
2015-05-26 13:46:51 +10:00
Lucas De Marchi
83efb9280b
AP_HAL: use variadic templates in FastDelegate
...
Now that we are using C++11 we can use variadic templates to simplify
the FastDelegate classes. It also simplifies moving away from the
FastDelegate implementation.
2015-05-26 13:46:51 +10:00
Lucas De Marchi
78b00784fb
AP_Scheduler: allow to use functor
2015-05-26 13:46:50 +10:00
Lucas De Marchi
58847bffd6
GCS_MAVLink: allow to use functor
2015-05-26 13:46:50 +10:00
Lucas De Marchi
cd308b5e2f
DataFlash: allow to use functor
2015-05-26 13:46:50 +10:00
Lucas De Marchi
384a3bfcc3
AP_Mission: allow to use functor
2015-05-26 13:46:50 +10:00
Lucas De Marchi
70525fa2c1
AP_Menu: allow to use functor
2015-05-26 13:46:50 +10:00
Lucas De Marchi
4b5cf24a81
Allow to change to functor implementation
...
Start to add code behind APM_BUILD_FUNCTOR to support changing the
functor implementation (without breaking the build while the change is
not complete).
2015-05-26 13:46:49 +10:00
Lucas De Marchi
a1e1503e1a
AP_HAL: Add Functor implementation
...
This is a Functor implementation that should cover the use cases we have
for FastDelegate. In contrary to the latter, it can be constructed at
compile time so the compiler can safely put it in a read-only section
which covers the cases in which we are not using it.
2015-05-26 13:46:49 +10:00
Lucas De Marchi
5dfb3ed70c
AP_Scheduler: replace tabs with spaces
2015-05-26 13:46:49 +10:00
Lucas De Marchi
82d22992bd
GCS_MAVLink: Do not compare delegate to NULL
...
Use the simpler "if (delegate_name)" since it allows simpler
implementation in the class, i.e. the bool operator rather than having
to compare to another object.
2015-05-26 13:46:49 +10:00
Lucas De Marchi
ff398dbf0c
AP_Menu: Do not compare delegate to NULL
...
Use the simpler "if (delegate_name)" since it allows simpler
implementation in the class, i.e. the bool operator rather than having
to compare to another object.
2015-05-26 13:46:48 +10:00
Lucas De Marchi
acdcdc35fa
AP_HAL_SITL: Do not compare delegate to NULL
...
Use the simpler "if (delegate_name)" since it allows simpler
implementation in the class, i.e. the bool operator rather than having
to compare to another object.
2015-05-26 13:46:48 +10:00
Lucas De Marchi
9ef870c08a
AP_HAL_AVR: Do not compare delegate to NULL
...
Use the simpler "if (delegate_name)" since it allows simpler
implementation in the class, i.e. the bool operator rather than having
to compare to another object.
2015-05-26 13:46:48 +10:00
Lucas De Marchi
57386434d1
AP_ADC: remove AP_ADC_HIL
...
It's not being used and it's actually broken: it references
AP_ADC_HIL::read() that doesn't exist.
2015-05-26 13:46:48 +10:00
Randy Mackay
d777166c6f
AP_MotorsTri: revert tail servo to Ch7
2015-05-25 22:27:38 +09:00
Randy Mackay
1a1fa7ca4b
AP_MotorsHeli: add comment to avoid param conflict
2015-05-25 22:13:49 +09:00
Randy Mackay
4c94a69e33
AP_MotorsCoax: resolve param conflict with TradHeli
2015-05-25 22:13:47 +09:00
Randy Mackay
78b49fb4c6
AP_MotorsSingle: resolve param conflict with TradHeli
...
Also rename servo reverse parameters to be consistent with tricopter
2015-05-25 22:13:45 +09:00
Randy Mackay
8dc7cf7fa8
AP_MotorsTri: YAW_SV_REV values -1 or +1
...
Also resolve parameter conflict with TradHeli
2015-05-25 22:13:43 +09:00
Randy Mackay
71e4bccecb
AP_Motors: init members in constructor
...
Also add f to end of float constants
2015-05-25 22:13:41 +09:00
Robert Lefebvre
915236f1f5
AC_AttitudeControl: Non-functional comment change
...
Don't encourage future misuse of g.rc3
2015-05-25 22:13:37 +09:00
Robert Lefebvre
e87ca6de6f
AC_PosControl: Change motors.get_throttle_out
...
to get_throttle to follow function renaming in AP_Motors
2015-05-25 22:13:34 +09:00
Robert Lefebvre
b8181b6b90
AP_Motors: RCMAP fix
...
Remove all RC Input channels passed as reference into AP_Motors. All input handling self-contained inside AP_Motors.
Rework Tricopter to use internal servo calcs.
2015-05-25 22:13:32 +09:00
Andrew Tridgell
527fc2a610
SITL: use 127.0.0.1 to improve reliability on windows
2015-05-25 22:02:18 +10:00
Andrew Tridgell
563be63d00
SITL: try to get speedup accurate on both windows and linux
2015-05-25 21:48:42 +10:00
Andrew Tridgell
2b2259a6d7
SITL: use more granrular sleeps for windows
2015-05-25 17:05:44 +10:00
Andrew Tridgell
c06d81a06a
SITL: use autotest_dir
...
this allows for the aircraft directory for SITL to be packaged without
the source tree
2015-05-25 13:04:46 +10:00
Andrew Tridgell
3daee9c8bc
HAL_SITL: added --autotest-dir option
2015-05-25 13:04:17 +10:00
Andrew Tridgell
4f37926aea
SITL: fixed gimbal build on PX4
2015-05-25 12:39:40 +10:00
Andrew Tridgell
958d8b4787
GCS_MAVLink: update from upstream headers
2015-05-25 12:20:27 +10:00
Andrew Tridgell
e7abc07898
HAL_SITL: enable --gimbal option
...
instantiates a MAVLink gimbal
2015-05-25 12:20:26 +10:00
Andrew Tridgell
7f5b206c55
SITL: added gimbal simulator class
2015-05-25 12:20:26 +10:00
Andrew Tridgell
2f7facba40
GCS_MAVLink: removed old MAVLink 0.9 headers
2015-05-25 10:19:47 +10:00
Andrew Tridgell
d96e62cce7
AP_Mount: update gimbal for changed quaternion API
2015-05-25 09:08:45 +10:00
Andrew Tridgell
2a8f645d81
AP_Math: use matrix3 euler312 operations in quaternion library
2015-05-25 09:08:31 +10:00
Andrew Tridgell
7aa7e03169
AP_Math: added euler312 functions (for gimbal)
2015-05-25 09:03:11 +10:00
Andrew Tridgell
2bb5f677c7
SITL: removed earth frame rates
2015-05-25 09:03:10 +10:00
Andrew Tridgell
8dce5e11d6
HAL_SITL: removed earth-frame rates
2015-05-25 09:03:10 +10:00
Andrew Tridgell
19419fd901
AP_Mount: fixed reporting of MAVLink gimbal position to GCS
2015-05-24 15:24:02 +10:00
Andrew Tridgell
b61f7fa2f6
AP_AHRS: enable EKF by default on plane
...
now we have arming checks enabled by default I think this is the best
choice
2015-05-23 17:17:44 +10:00
Andrew Tridgell
efd958f0b0
AP_NavEKF: rename file to remove spaces
...
spaces in file names break shell scripts
2015-05-23 17:14:52 +10:00
Andrew Tridgell
2d53a1ff9a
SITL: fixed airspeed in last_letter
2015-05-23 11:37:21 +10:00
Andrew Tridgell
ae6ac1b82d
SITL: fixed airspeed in CRRCSim
2015-05-23 11:35:56 +10:00
Andrew Tridgell
da5d5c9936
SITL: fixed airspeed pass-thru from simulators
2015-05-23 11:24:10 +10:00
Andrew Tridgell
e7f3716e8c
HAL_SITL: pass in wind speed to C++ simulators
2015-05-23 11:04:13 +10:00
Andrew Tridgell
091a1e7fe0
SITL: fixed wind support in JSBSim
2015-05-23 11:03:57 +10:00
Andrew Tridgell
4486ddc53e
DataFlash: changed TimeUS to SampleUS for raw IMU logging
...
this prevents a problem with an upcoming patch from Peter
2015-05-22 17:58:18 +10:00
Jonathan Challinger
28731d2bdc
AP_Motors: add throttle filter input constraint from -100 to 1100
2015-05-22 16:12:27 +09:00
Andrew Tridgell
60221f5e9c
SITL: use sendto() in CRRCSim
...
this makes us robust to restart of client or server
2015-05-22 16:07:45 +10:00
Andrew Tridgell
6cbd291dd2
HAL_SITL: make model name case insensitive
2015-05-22 16:07:44 +10:00
Andrew Tridgell
9336914598
AP_HAL: added sendto socket method
2015-05-22 16:07:44 +10:00
Andrew Tridgell
4e117bc90f
HAL_SITL: support last_letter simulator
2015-05-22 16:07:44 +10:00
Andrew Tridgell
b35c21fbe2
SITL: fixed socket recv error check
2015-05-22 16:07:43 +10:00
Andrew Tridgell
e487d95c1b
SITL: added direct support for last_letter simulator
2015-05-22 16:07:43 +10:00
Robert Lefebvre
bcc3fa0526
AC_HELI_PID: Pass default FF param setting in constructor
2015-05-22 09:38:28 +09:00
Robert Lefebvre
73bafa131e
AP_MotorsHeli: Overload output()
...
To protect it from future interference from Multirotor code.
2015-05-22 09:38:23 +09:00
Robert Lefebvre
d3ce68a8ca
AP_MotorsHeli: Overload update_throttle_filter()
...
Do not reset filter to zero when disarmed to allow collective pitch servo movement.
2015-05-22 09:38:20 +09:00
Peter Barker
6299a8c90d
autotest: drain control socket in SITL
...
fixes SITL on plane
2015-05-22 08:09:15 +10:00
Andrew Tridgell
cd66ce1c74
HAL_SITL: don't advance clock on garbage SIM input
2015-05-21 21:17:22 +10:00
Andrew Tridgell
605b8b4ece
AP_Math: converted rotations example to cpp
...
this is just a test conversion before we start converting on-mass
2015-05-21 13:41:20 +10:00
Andrew Tridgell
062c9406bd
AP_Math: fixed rotations example build
2015-05-21 13:37:44 +10:00
Andrew Tridgell
a1a3212131
AP_Common: moved NOINLINE define to AP_Common.h
2015-05-21 09:35:26 +10:00
Andrew Tridgell
fb97c16a84
AP_Param: make data pointer const
2015-05-21 07:48:52 +10:00
Andrew Tridgell
84726e4a3a
GCS_MAVLink: use APM_BUILD_DELEGATES
2015-05-21 07:48:52 +10:00
Andrew Tridgell
f8aef57ec3
DataFlash: use APM_BUILD_DELEGATES
2015-05-21 07:48:51 +10:00
Andrew Tridgell
0847bd2608
AP_Scheduler: use APM_BUILD_DELEGATES
2015-05-21 07:48:51 +10:00
Andrew Tridgell
e7ba2c8d93
AP_Mission: use APM_BUILD_DELEGATES
2015-05-21 07:48:51 +10:00
Andrew Tridgell
3a300575bc
AP_Menu: use APM_BUILD_DELEGATES
2015-05-21 07:48:51 +10:00
Andrew Tridgell
98d2b9b3aa
AP_Vehicle: added APM_BUILD_DELEGATES macro
2015-05-21 07:48:50 +10:00
Andrew Tridgell
c3aa8d67fa
AP_Arming: convert to delegates
2015-05-21 07:48:50 +10:00
Andrew Tridgell
71b550d7b5
GCS_MAVLink: support member functions for rover
2015-05-21 07:48:47 +10:00
Andrew Tridgell
b5d930be61
DataFlash: support member functions for rover
2015-05-21 07:48:47 +10:00
Andrew Tridgell
1237772479
AP_Scheduler: support member functions for rover
2015-05-21 07:48:46 +10:00
Andrew Tridgell
12cbf7888f
AP_Mission: support member functions for rover
2015-05-21 07:48:46 +10:00
Andrew Tridgell
db13f657a8
AP_Menu: support member functions for rover
2015-05-21 07:48:46 +10:00
Andrew Tridgell
e1e85ecc3d
AP_Progmem: simpler PROGMEM header
2015-05-21 07:48:46 +10:00
Andrew Tridgell
abfb601db6
AP_Progmem: added pgm_read_block()
2015-05-21 07:48:45 +10:00
Andrew Tridgell
d57fcf7e46
AP_HAL: added workaround for AVR delegates in PROGMEM
2015-05-21 07:48:45 +10:00
Andrew Tridgell
be587beedc
AP_HAL: disable nagle on sockets for faster local operation
2015-05-21 07:48:45 +10:00
Andrew Tridgell
b0932548d8
AP_GPS: enable NMEA GPS on AntennaTracker
...
we have enough flash space for it
2015-05-21 07:30:21 +10:00
Andrew Tridgell
411a96b4b3
AP_NavEKF: take at most 30s to accept DCM attitude
...
velocity noise on the GPS can cause DCM to take a long time to
converge. If it takes longer than 30s then allow EKF to start
2015-05-20 15:22:15 +10:00
Andrew Tridgell
7a76f72bf5
AP_AHRS: added uptime_ms() interface
2015-05-20 15:22:14 +10:00
ziltoid2
23787cf695
AP_Baro: use ground_temperature instead of calibration_temperature for alt calculation
2015-05-20 11:42:21 +10:00
Andrew Tridgell
92c4c5cbcf
AP_NavEKF: change using_gps threshold to 4s
...
this means plane will continue to use dead reckoning with GPS 3D lock
for 4s
2015-05-19 20:52:39 +10:00
Paul Riseborough
69ca654194
AP_NavEKF: Update declination when we know our location
...
This ensures that when we start using GPS, that the EKF will be using the correct declination for that location
If declination is not known it defaults to zero
2015-05-19 20:35:52 +10:00
Paul Riseborough
c1c5e3598a
AP_NavEKF: Enforce alignment of realigned earth mag field with declination
...
This prevents bad inertial or GPS data combined with the post takeoff heading alignment check used by plane from resulting in earth field states that have an incorrect declination
2015-05-19 20:35:52 +10:00
Paul Riseborough
b1d8805114
AP_NavEKF: Reduce takeoff detection sensitivity
...
This patch reworks the in-air transition criteria to reduce the likelihood of false positives and to ensure that there will be enough ground speed to make the heading check work reliably.
2015-05-19 20:35:52 +10:00
Randy Mackay
d1808c645d
AC_PosControl: recalc leash length on speed or accel change
...
This resolves an issue in which do-set-speed would not take effect until
one waypoint too late in a mission.
2015-05-19 18:16:39 +09:00
Andrew Tridgell
5514a9f690
AP_NavEKF: base EKF decisions on vehicle class
...
using the vehicle class rather than the build macros allows this to
work correctly in replay
2015-05-19 15:21:22 +10:00
Andrew Tridgell
92daa15ccc
AP_AHRS: on plane and rover make AHRS unhealthy when EKF not initialised
...
planes and rovers need full absolute position from the EKF if the EKF
is going to be used. We don't want users to arm without full
capabilities
2015-05-19 15:21:21 +10:00
Andy Piper
c600c1a746
DataFlash: log Gyro and Accel Health for IMUs.
...
Log the health of the various IMUs under GyHlt and AcHlt.
(Names are shortened to get inside the string array limit).
2015-05-19 13:13:35 +09:00
Andrew Tridgell
0619247992
HAL_Linux: don't advance time in delay() and delay_microseconds()
...
this could cause time to go backwards in Replay. Thanks to Peter for
finding this
2015-05-19 13:17:15 +10:00