Peter Barker
e74d07ff15
Rover: remove wrapper for Log_Write_Beacon
2018-04-04 16:20:33 +09:00
Francisco Ferreira
b2af1f1e05
Rover: fix method shadowing
2018-04-03 16:29:33 +01:00
Peter Barker
a45e3cba15
Rover: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Randy Mackay
c05d239069
Rover: remove throttle scaling dependency on throttle range
2018-04-03 10:42:39 +09:00
Randy Mackay
fa20fd695f
Rover: use throttle_min param as output deadzone
2018-04-03 10:42:39 +09:00
Randy Mackay
b9e32d1f44
Rover: reduce expected times in scheduler table
2018-04-03 08:40:31 +09:00
Peter Barker
c10f404b12
Rover: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
b407a4eed8
Rover: move common calibration functions up
2018-04-02 23:25:05 +01:00
Peter Barker
762b31b147
Rover: create a preflight calibration function
...
Some functionality has moved up.
2018-04-02 23:25:05 +01:00
Peter Barker
db7ce9aba2
Rover: use ahrs singleton for SmartRTL
2018-04-02 17:16:02 +01:00
Randy Mackay
39bade1f4a
Rover: 3.2.3-rc2 release notes
2018-04-02 12:01:45 +09:00
Randy Mackay
c923158cc9
Rover: 3.2.3-rc1 release notes
2018-04-02 11:11:13 +09:00
nicknunno
8888adbfd4
Rover: TURN_MAX_G param desc update for range and increment
2018-04-02 09:13:25 +09:00
Michael du Breuil
b761a57da3
Rover: Support new battery interface
2018-03-27 22:12:21 +01:00
Peter Barker
57ed822db0
Rover: allow DataFlash to handle log sending
2018-03-26 09:22:47 +09:00
Peter Barker
3c58eca0ab
Rover: move handling of visual odometry messages up
2018-03-23 09:28:07 +09:00
Randy Mackay
96ae9cef14
Rover: send correct mav-type for boats
2018-03-22 09:11:52 +09:00
Randy Mackay
489551c9a4
Rover: 3.2.2 release notes
2018-03-19 19:11:53 +09:00
Peter Barker
bb7bed0614
Rover: move handling of get_home_position up
2018-03-19 10:32:37 +09:00
Peter Barker
7fd859da65
Plane: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
9d0da4a71f
Rover: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
ceb64fb7d9
Rover: use ins singleton
2018-03-16 00:37:35 -07:00
Randy Mackay
30ba463f42
Rover: minor comment fix to acro
...
non-functional change
2018-03-15 09:58:24 +09:00
Randy Mackay
00353c7a06
Rover: avoid divide by zero in desired speed at waypoint calcs
2018-03-14 12:40:04 +09:00
Randy Mackay
86c39c0314
Rover: run update_mission at 50hz
2018-03-14 12:40:04 +09:00
Randy Mackay
343d119726
Rover: wp nav uses stopping point or prev wp for origin
2018-03-14 12:40:04 +09:00
Randy Mackay
073d9519ca
Rover: version to ArduRover V3.3.0-dev
2018-03-12 16:11:37 +09:00
Randy Mackay
e3f70119fe
Rover: fix two-paddle input decoding
...
steering output was twice what it should be. full steering (i.e. 4500 or -4500) should occur when one paddle is up and the other is completely down
2018-03-12 14:39:13 +09:00
Peter Barker
81ba037582
Rover: use baro singleton
2018-03-08 21:20:05 -08:00
Peter Barker
1f772c05f4
Rover: delete correct assignment operator
2018-03-08 21:20:05 -08:00
Randy Mackay
dcfe104163
Rover: reduce CRUISE_SPEED default to 2m/s
...
based on user logs most rovers max speed is less than 4m/s so this default is closer to the average
2018-03-09 13:19:21 +09:00
Randy Mackay
1baa6eb049
Rover: 3.2.2-rc1 release notes
2018-03-08 16:24:03 +09:00
Randy Mackay
4e8399ca3f
Rover: acro and steering steer even with target speed of zero
2018-03-08 14:45:43 +09:00
Peter Barker
78ecf55fec
Rover: use AP::ahrs() for GCS_MAVLink
2018-03-07 12:34:39 +00:00
night-ghost
bab54ea647
Rover: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
Andrew Tridgell
f190ca0867
Rover: use scheduler.get_last_loop_time_s()
2018-02-13 17:15:05 +11:00
Peter Barker
90d26a5100
Rover: eliminate perf_update scheduler table shim
2018-02-13 17:15:05 +11:00
Andrew Tridgell
80c45a7431
Rover: use filtered loop time
2018-02-13 17:15:05 +11:00
Peter Barker
7b6bc4adf1
Rover: pass log-performance-bit at init time rather than update time
2018-02-13 17:15:05 +11:00
Peter Barker
55c27dfc56
Rover: move logging of PM messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
b2e2b91d7e
Rover: move PERF: statustext sending into AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
d9bb546048
Rover: use AP_Scheduler's loop() function
2018-02-13 17:15:05 +11:00
Peter Barker
211e7416a9
Rover: use scheduler ticks in place of mainloop_count
2018-02-13 17:15:05 +11:00
Peter Barker
9511e72113
Rover: use PerfInfo for performance monitoring
2018-02-13 17:15:05 +11:00
Randy Mackay
24b8ed48b6
Rover: global-pos-int uses vel from EKF instead of GPS
2018-02-13 08:52:48 +09:00
Randy Mackay
f47e65822f
Rover: fix global-pos-int velocity direction to NED
2018-02-13 08:52:48 +09:00
Peter Barker
df304c5e6b
Rover: remove shims used in scheduler table
2018-02-12 15:39:26 +09:00
Peter Barker
89c830e949
Rover: make SmartRTL mode decide whether to save position or not
...
This changes things to work like the Copter equivalent
2018-02-12 15:39:26 +09:00
Andrew Tridgell
65308f9411
Rover: removed compass learn_offsets()
2018-02-08 17:36:33 +11:00
Randy Mackay
0da8ff6b2e
Rover: boats always navigate when outside waypoint radius
2018-02-07 07:33:11 +09:00
Michael du Breuil
2e9e91b3a3
Rover: Move battery logging to AP_BattMonitor
2018-02-06 00:11:32 +00:00
murata
e94bfc7ee0
Rover: delete \n from the log using gcs().send_text
2018-02-02 09:38:36 +09:00
Randy Mackay
0626d105ed
Rover: version 3.2.1-dev fix
2018-01-29 19:37:46 +09:00
Randy Mackay
b459e7fa7f
Rover: 3.2.1 release notes
2018-01-29 19:35:46 +09:00
Randy Mackay
a6ff2cacdd
Rover: 3.2.1-rc1 release notes
2018-01-24 12:09:54 +09:00
Randy Mackay
a5d7b8bb19
Rover: remove unused definition
2018-01-23 15:52:39 +09:00
Randy Mackay
2748d4d0fe
Rover: arming checks for GPS use requires_position and velocity
2018-01-23 11:27:56 +09:00
Randy Mackay
9cba1e2907
Rover: gps check replaced by requires-position, requires-velocity
...
requires_gps is replaced by requires_position and requires_velocity
enter_gps_checks method is removed and enter method directly checks ekf flags and ekf origin
2018-01-23 11:27:56 +09:00
Randy Mackay
509c7e2a8f
Rover: add object avoidance to steering and acro modes
2018-01-22 17:18:41 +09:00
Randy Mackay
2320bfb637
Rover: add AC_AttitudeControl to build
...
This is required only because the static function sqrt_controller is within this library.
2018-01-22 17:18:41 +09:00
Randy Mackay
489c42bdff
Rover: add avoidance library
2018-01-22 17:18:41 +09:00
khancyr
5503a0069d
Rover: add proximity library
2018-01-22 17:18:41 +09:00
khancyr
c3fb985ec5
Rover: add fence support
2018-01-22 17:18:41 +09:00
Dylan Herman
c14af79975
Rover: now sends SCALED_PRESSURE msg
2018-01-22 10:04:57 +09:00
Dylan Herman
9d7eb188d1
Rover: enter Hold on failure to enter RTL fs action
2018-01-19 09:26:45 +09:00
Dylan Herman
f3b794f698
Rover: Add SmartRTL failsafe action
...
Add failsafe actions SmartRTL or RTL and SmartRTL or Hold
2018-01-19 09:26:45 +09:00
Randy Mackay
6ce9b47807
Rover: calc_speed_nudge honours max speed even in reverse
...
calc_speed_nudge allows the pilot to increase the speed of the vehicle including cases when the vehicle is in reverse. This fixes the nudging code so the pilot-nudged throttle does not surpass the vehicle's maximum speed even in reverse.
Thanks to pavloblindnology for finding this!
2018-01-19 09:23:33 +09:00
Dylan Herman
3edaff0309
Rover: sets SmartRTL home after ahrs home is set
...
Now uses AP_SmartRTL::set_home. It is called when arming and when GCS
requests home to be set to the current location
2018-01-17 11:03:56 +09:00
Randy Mackay
ed452c6a27
Rover: version to 3.2.1-dev
...
this helps us easily determine if developer versions are from before or after the 3.2 release
2018-01-13 17:53:18 +09:00
Randy Mackay
a3b667ea24
Rover: 3.2.0 release notes
2018-01-13 15:28:58 +09:00
Randy Mackay
e2824be250
Rover: add const and comments to calc_speed_max
2018-01-12 08:15:34 +09:00
Randy Mackay
5cd500847b
Rover: rename auto_throttle to allows_arming_from_transmitter
...
This method is only used to determine whether we can arm from the transmitter so better to make its purpose more clear
Also minor comment fix to is_autopilot_mode method
2018-01-12 08:15:34 +09:00
Randy Mackay
5167ec7708
Rover: send PID to GCS regardless of mode
...
Also add some comments
2018-01-12 08:15:34 +09:00
Randy Mackay
5a5be9175d
Rover: 3.2.0-rc4 release notes
2018-01-05 14:02:01 +09:00
Randy Mackay
072b5187a3
Rover: steering mode reversing fix
2018-01-05 10:23:20 +09:00
Randy Mackay
916fe80000
Rover: remove mode class's desired-lat-accel
...
This was a duplicate of the value held in the attitude controller
2018-01-05 09:27:53 +09:00
Randy Mackay
49493fe6a2
Rover: add calc_steering_to_heading
...
removes some duplicate code in Guided and Auto
2018-01-05 09:27:53 +09:00
Randy Mackay
dc283e9c26
Rover: re-order calc_steering declarations to match .cpp file
2018-01-04 14:07:55 +09:00
Peter Barker
1d3e7d454a
Rover: correct gps-is-healthy mode change check
2017-12-28 15:35:19 +00:00
Peter Barker
7cf2712bf1
Rover: AP_AHRS no longer requires GPS in constructor
2017-12-27 00:58:02 +00:00
Randy Mackay
457c39bf1b
Rover: FS_ param values changed to camel case
...
Also minor comment change in crash-check failsafe
2017-12-23 13:53:34 +09:00
Randy Mackay
241456f55f
Rover: remove auto trim at startup
...
Also add additional checks to auto trim
2017-12-15 20:26:40 +09:00
Randy Mackay
6459a4de9d
Rover: gyro health check uses initialised flag
...
We should not be relying on the notify flags as a way to pass info around the system. Rover's initialised flag is equivalent and more appropriate.
2017-12-15 20:26:40 +09:00
Randy Mackay
a8da459baf
Rover: GPS reported healthy to GCS even without lock
...
a GPS is unhealthy when it cannot be contacted. Not having a 3D lock should not make the GPS unhealthy.
2017-12-15 20:26:40 +09:00
Peter Barker
bce9a40ab5
Rover: remove unimplemented methods
2017-12-15 13:27:14 +09:00
Andrew Tridgell
482ae876fb
Rover: removed create() method for objects
...
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Randy Mackay
f6f40afcda
Rover: rename control_mode_from_num to mode_from_mode_num
2017-12-12 10:39:26 +09:00
Randy Mackay
c17549c7ff
AP_Arming: integrate pre arm check if regular and skid steering configured
2017-12-11 11:56:12 +09:00
Randy Mackay
ebe3ec88a7
AP_MotorsUGV: pre arm check if regular and skid steering configured
2017-12-11 11:56:12 +09:00
Randy Mackay
5d7e3d31c9
Rover: PM log message more consistent with Plane
2017-12-09 16:23:16 +09:00
Randy Mackay
4958298a75
Rover: fix auto mode distance_to_destination
2017-12-09 12:52:35 +09:00
Randy Mackay
de196f818d
Rover: log STER dataflash message regardless of mode
...
It is useful to at least have the pilot's steering in request even in manual modes
2017-12-09 12:18:49 +09:00
Randy Mackay
5f62cde550
Rover: remove throttle from NTUN logging
...
Throttle is more extensively logged in the THR message
2017-12-09 12:18:49 +09:00
Randy Mackay
9710b16cac
Rover: THR dataflash logging replaces CTUN
2017-12-09 12:18:49 +09:00
Randy Mackay
efae648461
Rover: STR dataflash logging gets turn rate
...
also get turn rate and lat accel from attitude controller
2017-12-09 12:18:49 +09:00
Randy Mackay
8e80490098
Rover: reporting gets lat accel from attitude control
2017-12-09 12:18:49 +09:00
Randy Mackay
b778546eda
Rover: rename mode lateral acceleration and make private
2017-12-09 12:18:49 +09:00
Randy Mackay
df81f666df
Rover: fix LOG_BITMASK parameter description
2017-12-09 12:18:49 +09:00
Randy Mackay
34c2fba9a7
Rover: boats stay active at destination in guided, rtl, smartrtl
2017-12-08 08:48:05 +09:00
Randy Mackay
8eb991b610
Rover: boats say active at destination in auto
...
previously the user would use the LOITER_UNLIMITED or LOITER_TIME mission commands to specify that the vehicle should remain active at the destination. This was cumbersome and not the best way to specify this behaviour because these two commands are valid for regular rovers that should not try to remain active at the destination.
2017-12-08 08:48:05 +09:00
Randy Mackay
aa38239629
Rover: add FRAME_CLASS to differentiate boats from rovers
2017-12-08 08:48:05 +09:00
Randy Mackay
57067fb8bc
Rover: add WP_SPEED and RTL_SPEED
...
This separates the default/maximum speed used in Auto, Guided, RTL and SmartRTL from the CRUISE_SPEED which is used as the base for the speed-to-throttle controller (along with CRUISE_THROTTLE)
2017-12-07 07:29:10 +09:00
Randy Mackay
22ef276484
Rover: add const to mode::speed_error
2017-12-07 07:29:10 +09:00
Randy Mackay
8f08f5189a
Rover: constify some temporary variables
2017-12-07 07:29:10 +09:00
Randy Mackay
5dabb37834
Rover: 3.2.0-rc3 release notes
2017-12-05 20:57:27 +09:00
Randy Mackay
bccdb4e195
Rover: hold mode does not require GPS
...
If armed without GPS, the user was unable to enter hold mode
2017-12-05 20:26:38 +09:00
Randy Mackay
97e87e2150
AP_MotorsUGV: skid steering always uses full range
...
Allows skid friction to be removed
2017-12-05 20:26:35 +09:00
Randy Mackay
988e4290dd
Rover: formatting and comments for set-position-target handling
2017-12-05 12:15:33 +09:00
Randy Mackay
1d92ec5724
Rover: set-position-target message processing only checks xy fields
2017-12-05 12:15:31 +09:00
khancyr
9299943347
Rover: adjust setpoint_velocity handling
2017-12-05 12:14:46 +09:00
Randy Mackay
87658e6a07
AP_MotorsUGV: add MOT_THST_EXPO to scale output to motors
2017-12-04 09:53:06 +09:00
Randy Mackay
bee8741b60
AP_MotorsUGV: order methods in cpp file to match h
...
non-functional change
2017-12-04 09:53:06 +09:00
Randy Mackay
865fb91676
Rover: add rpm to WENC dataflash logging
2017-12-04 09:53:06 +09:00
Peter Barker
1d2ec9054b
Rover: tighten return types of mavlink functions and variables
2017-12-01 17:01:10 +00:00
Randy Mackay
0c6afac5c6
Rover: allow mode to be set from ch7 switch
2017-12-01 21:59:55 +09:00
Randy Mackay
ed558dd9a0
Rover: play sad tune when arming fails
2017-12-01 21:59:55 +09:00
Randy Mackay
b4a779aec3
Rover: add arm/disarm to ch7 switch
2017-12-01 21:59:55 +09:00
Randy Mackay
8eb58b266a
Rover: remove unused failsafe_throttle_suppress method
2017-12-01 21:59:55 +09:00
Randy Mackay
8043c0f638
Rover: reduce arming delay to 2 sec
2017-12-01 21:59:55 +09:00
Peter Barker
e38cefea8a
Rover: add SmartRTL mode
...
called at 3hz from scheduler
2017-12-01 09:28:56 +09:00
Randy Mackay
86ce3f2b32
Rover: add SmartRTL library to build
2017-12-01 09:28:56 +09:00
Randy Mackay
9f94875228
Rover: mode class gets set_desired_location_NED
2017-12-01 09:28:56 +09:00
Randy Mackay
6d472376bb
AP_MotorsUGV: do not limit just because of saturation
...
steering and throttle limit flags should only be set when there is no point in the caller passing in higher values because it will not result in an increased response. In the case of saturation, higher inputs will still result in a higher response.
2017-11-30 20:13:11 +09:00
Peter Barker
5612292802
Rover: allow vehicle to be armed in manual with no GPS
2017-11-30 15:41:50 +09:00
Peter Barker
1a59b38204
Rover: use throttle rather than steering to determine target speed
2017-11-30 15:37:40 +09:00
Peter Barker
68800a52f5
Rover: move RC failsafe check up
...
Both steering and acro modes can benefit from this check
2017-11-29 17:35:44 +09:00
Randy Mackay
69dc68d621
Rover: re-order acro mode to add early return
...
non-functional change
2017-11-29 14:03:43 +09:00
Randy Mackay
060f1d36dd
Rover: allow aux switch to record waypoints when not in auto-mode
...
this reduces the changes required when adding new modes
2017-11-29 14:03:43 +09:00
Peter Barker
45d76bdf25
Rover: add name4() to Mode and use it for AP_Notify calls
2017-11-29 14:03:43 +09:00
Randy Mackay
04e9228fa0
Rover: add Acro mode
...
ACRO_TURN_RATE allows user control of maximum turn rate
2017-11-29 14:03:43 +09:00
Randy Mackay
5b7cd31221
Rover: send steering PID tuning to GCS in most modes
...
Using manual_steering and auto_throttle is not perfectly correct because we will send steering rate PID info in HOLD mode but will not send throttle PID info in Steering mode
2017-11-29 09:38:53 +09:00
Randy Mackay
26f50f6055
Rover: PILOT_STEER_TYPE replaces SKID_STEER_IN
...
new options allow controlling vehicle's heading while reversing
skid-steering vehicles rotate in opposite direction when backing up
2017-11-29 09:38:53 +09:00
Randy Mackay
c6689fd2e1
Rover: rename calc_nav_steer to calc_steering_from_lateral_acceleration
...
rename calc_lateral_acceleration to calc_steering_to_waypoint
calc_steering_to_waypoint internally calls calc_steering_from_lateral_acceleration
non-functional change
2017-11-28 11:46:21 +09:00
Randy Mackay
fa7c56a110
Rover: minor comment fix
2017-11-28 10:38:19 +09:00
Daniel Widmann
8f1857759f
AP_MotorsUGV: allow larger MOT_SLEWRATE values
2017-11-28 09:12:18 +09:00
Randy Mackay
78275ec4a1
AP_MotorsUGV: throttle slew updates motor limit flags
...
this ensure I-term build-up doesn't happen when the slew
causes the throttle to react slowly
2017-11-28 09:12:18 +09:00
Andrew Tridgell
01c4e51d08
Rover: don't disable compass on one bad reading
...
the compass can go back for a short time and recover
found by Michael
2017-11-28 09:02:24 +11:00
Randy Mackay
a7fd353f14
Rover: add comment to unused param enum entries
2017-11-27 20:40:35 +09:00
Randy Mackay
6d805b64b6
AP_MotorsUGV: remove access to enable/disable throttle slewing
2017-11-27 14:31:20 +09:00
Randy Mackay
23028a659b
Rover: slew throttle in all modes
2017-11-27 14:31:20 +09:00
Randy Mackay
822c4b6dca
Rover: remove set of slew for motor test
...
The motor library test function does not attempt to implement slewing so setting this is not necessary
2017-11-27 14:31:20 +09:00
Randy Mackay
cab972a429
Rover: reduce TURN_MAX_G default to 1.0
...
This is probably still slightly too high but closer than the previous 2.0
2017-11-27 12:25:28 +09:00
Peter Barker
9272c10043
Rover: use short descriptions for mission item types
2017-11-27 10:28:24 +09:00
Randy Mackay
b60cb536ab
Rover: RTL within auto mode
2017-11-23 10:20:19 +09:00
Randy Mackay
14d9e932ab
Rover: allow disarming from transmitter on skid-steering vehicles
2017-11-23 09:07:04 +09:00
Peter Barker
bf6b3a72bc
Rover: support for units on fields
2017-11-23 10:40:30 +11:00
khancyr
279a57dc10
APMrover2: fix servo_out to GCS message
2017-11-21 20:23:55 +09:00
khancyr
005002736b
AP_MotorsUGV: fix MOT_SLEWRATE parameter description
2017-11-21 20:02:20 +09:00
Andrew Tridgell
d57f307032
Rover: use cork/push wrapper
2017-11-21 14:10:54 +11:00
Peter Barker
c00a4f3bb2
Rover: AP_Camera uses GPS singleton
2017-11-16 15:28:37 +00:00
Peter Barker
baf82cec22
Rover: use gps singleton for GCS functions
2017-11-15 13:43:03 +00:00
khancyr
c08203de17
Rover: allow pivot turn in STEERING mode
2017-11-15 13:46:58 +09:00
André Kjellstrup
aab22d7dad
Rover: Option to trig by distance only when in AUTO mode
2017-11-14 00:10:22 +00:00
Randy Mackay
7e2214c2be
Rover: simplify logic for lateral-accel override during use-pivot-steering
...
It was theoretically possible that the lateral-acceleration would not be overwritten if the yaw-error-cd was exactly zero
2017-11-08 17:15:59 +09:00
khancyr
2b0645d6a1
Rover: get_throttle_out calls do not require skid-steering arg
2017-11-08 15:45:43 +09:00
Daniel Widmann
bc7cf97b4e
Rover: don't use GPS speed to detect reversing
...
instead pass reverse to attitude controller based on desired speed
2017-11-08 14:37:59 +09:00
Daniel Widmann
ac7e76cc43
Rover: enable pivot turns in auto mode
2017-11-08 14:35:00 +09:00
Pierre Kancir
4d38eb85a1
APMRover2: Add support of MANUAL_CONTROL msg
2017-10-31 09:31:05 +09:00
Randy Mackay
7fb4f17ad9
Rover: 3.2.0-rc2 release notes
2017-10-28 15:16:11 +09:00
Peter Barker
2d0a23fcc8
Rover: call ins's periodic function
2017-10-27 16:33:45 +11:00
khancyr
74d5767e25
Rover: Fix slew rate range
2017-10-26 19:44:43 +09:00
Randy Mackay
2ef1e8e4c2
Rover: fix PID desired and achieved reporting
2017-10-26 19:44:18 +09:00
Randy Mackay
ea70755f00
Rover: fix speed nudge
...
fix bug when target speed was exactly zero which caused nudge to be a large negative value
2017-10-26 19:44:07 +09:00
Randy Mackay
fb9f695d2f
Rover: fix use-pivot-steering
...
absolute yaw error should be used
2017-10-26 19:43:55 +09:00
Randy Mackay
fb944322c7
Rover: minor fix to disarm logic
...
check should use logical and instead of bitwise and
2017-10-26 19:43:48 +09:00
Randy Mackay
2c568f8046
Rover: minor parameter description change
...
non-functional change
2017-10-26 19:43:42 +09:00
Randy Mackay
9f67d2a88d
Rover: add MOT_SKID_FRIC to up skid-steer motor out while stopped
2017-10-26 19:43:36 +09:00
Tom Pittenger
f7d07fc146
Rover: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Andrew Tridgell
f25e8631ef
Rover: support simple accelcal
2017-10-10 10:57:38 +11:00
Michael du Breuil
4f83d39b5e
Rover: Report GPS health
2017-09-27 19:29:32 +01:00
Lucas De Marchi
e98ccb9ae6
ArduRover: use static method to construct controllers
2017-09-26 03:01:21 +01:00
Lucas De Marchi
bfd13dfe87
global: use static method to construct AP_AHRS_DCM
2017-09-26 03:01:21 +01:00
Lucas De Marchi
beabae6a98
global: use static method to construct AP_AHRS_NavEKF
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c9fbf7b722
global: use static method to construct AP_NavEKF3
2017-09-26 03:01:21 +01:00
Lucas De Marchi
e2fe36357a
global: use static method to construct AP_NavEKF2
2017-09-26 03:01:21 +01:00
Lucas De Marchi
eadd650d78
global: use static method to construct AP_RSSI
2017-09-26 03:01:21 +01:00
Lucas De Marchi
18aa88b329
global: use static method to construct AP_Mount
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c3647f0185
global: use static method to construct AP_Camera
2017-09-26 03:01:21 +01:00
Lucas De Marchi
cc53e7bc4b
global: use static method to construct AP_ServoRelayEvents
2017-09-26 03:01:21 +01:00
Lucas De Marchi
13d7f58036
global: use static method to construct AP_Relay
2017-09-26 03:01:21 +01:00
Lucas De Marchi
9ce6019138
global: use static method to construct AP_Frsky_Telem
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b022c02029
global: use static method to construct AP_BattMonitor
2017-09-26 03:01:21 +01:00
Lucas De Marchi
69b6d95cb2
global: use static method to construct AP_Board_Config{,_CAN}
2017-09-26 03:01:21 +01:00
Lucas De Marchi
a74e700006
global: use static method to construct RCMapper
2017-09-26 03:01:21 +01:00
Lucas De Marchi
72fd2d6f05
global: use static method to construct AP_SerialManager
2017-09-26 03:01:21 +01:00
Lucas De Marchi
fbe0d9761c
global: use static method to construct AP_OpticalFlow
2017-09-26 03:01:21 +01:00
Lucas De Marchi
5ec1430726
APMrover2: use static method to construct AP_Arming_Rover
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b36a5919f5
global: use static method to construct AP_Mission
...
This also move the initialization to be in the header for those that
weren't already to maintain consistency.
2017-09-26 03:01:21 +01:00
Lucas De Marchi
40fd1b346c
global: remove rangefinder from AP_AHRS_NavEKF
...
AP_AHRS_NavEKF doesn't use the rangefinder, it just delegates the
calls to the right estimator.
For libraries/AP_AHRS/examples/AHRS_Test/AHRS_Test.cpp the initialization
order has also been modified to match the order on vehicles. It's more
correct since it passes a reference when EKF2/EKF3 are already
constructed, while thos constructors use a pointer. Ideally these
should be moved to an init() method though, or use a get_instance().
2017-09-26 03:01:21 +01:00
Lucas De Marchi
9027a55696
global: use static method to construct RangeFinder
2017-09-26 03:01:21 +01:00
Lucas De Marchi
f5c2ffffb9
global: remove DataFlash from AP_Mount::init()
2017-09-26 03:01:21 +01:00
Lucas De Marchi
53c82b4aaf
global: use static method to construct DataFlash_Class
2017-09-26 03:01:21 +01:00
Lucas De Marchi
62ac0ab8aa
global: use static method to construct AP_Notify
2017-09-26 03:01:21 +01:00
Lucas De Marchi
de680dac5b
global: use static method to construct AP_Scheduler
2017-09-26 03:01:21 +01:00
Lucas De Marchi
8094482f21
global: use static method to construct AP_GPS
2017-09-26 03:01:21 +01:00
Lucas De Marchi
87b30b4552
global: use static method to construct AP_InertialSensor
2017-09-26 03:01:21 +01:00
Lucas De Marchi
c1a957fbf3
global: use static method to construct Compass
2017-09-26 03:01:21 +01:00
Lucas De Marchi
91feec0e14
global: use static method to construct AP_Baro
2017-09-26 03:01:21 +01:00
Lucas De Marchi
ad05e0a643
APMrover2: protect version.h from inclusion and use ap_version.h
2017-09-23 21:37:45 -07:00
Lucas De Marchi
27be369be7
APMrover2: do not include version.h/ap_version.h
...
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
