Andy Piper
5a6be9e0a2
AP_Mount: INS get_sample_rate() renamed to get_loop_rate_hz()
2020-07-10 16:45:29 +10:00
Peter Barker
9142f877e7
AP_Mount: use logger Write method for logging Solo gimbal
...
Also document the messages
2020-04-28 09:56:09 +10:00
Peter Barker
856b635e89
AP_Mount: convert Solo gimbal messages to TimeUS from TimeMS
...
Also remove unused gimbal3 message entirely
2020-04-15 16:11:04 +10:00
Randy Mackay
8ad9a49900
AP_Mount: ignore rc trim when calculating desired mount angles
2020-02-25 17:38:24 +09:00
Peter Barker
7b32f2876e
AP_Mount: change type of roi_target_set to boolean
2019-11-12 07:52:22 +08:00
Peter Barker
c649fd1468
AP_Mount: support sysid targetting
2019-11-12 07:52:22 +08:00
Peter Barker
7139c1121f
AP_Mount: correct use of disparate altitude frames in AP_Mount
2019-11-05 19:55:45 +11:00
Peter Barker
47ad331135
AP_Mount: use AHRS singleton to get current position
2019-11-05 19:55:45 +11:00
Andrew Tridgell
5f90afa71e
AP_Mount: change optimisation from -O3 to -O2
2019-09-28 08:57:26 +10:00
Peter Barker
2d1357b44c
AP_Mount: stop passing serial manager through to init()
2019-08-28 06:55:28 +10:00
Pierre Kancir
f3e40b4906
AP_Mount: pass mavlink_message_t by const reference
2019-07-16 20:51:42 +10:00
Peter Barker
edc8401457
AP_Mount: remove pointless virtual declarations
2019-07-15 09:15:06 +09:00
Peter Barker
a037920de4
AP_Mount: tidy use of AP_Logger.h
2019-07-09 10:57:20 +10:00
Andrew Tridgell
a45e364252
AP_Mount: don't use disabled IMUs in solo gimbal code
2019-07-07 19:03:01 +10:00
Peter Barker
e58eae3c48
AP_Mount: remove unneeded typedefs
...
Also note that one of these was incorrectly sized.
2019-07-03 16:12:40 +09:00
Michael du Breuil
6480786ab2
AP_Mount: Cleanup SoloGimalEKF headers further
2019-06-27 14:56:21 +10:00
Michael du Breuil
fbd19f30e7
AP_Mount: Reduce header includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
03a4dda810
AP_Mount: Remove unneeded dependency on AP_Airspeed, and bad example
2019-06-18 10:02:05 +10:00
Michael du Breuil
2d161e3594
AP_Mount: Remove unneeded headers
2019-04-05 20:12:53 +11:00
Tom Pittenger
9dc7e5342d
AP_Mount: rename dataflash to logger
2019-03-28 16:40:57 +11:00
HITMAnsOFT
9c26b5bb9c
AP_Mount: fix SToRM32 Serial protocol delay
...
The packets to a SToRM32 gimbal were being sent at 1s intervals when in MAVLINK targeting mode.
We need to send them faster or smooth targetting is impossible.
2019-03-22 10:11:05 +11:00
Peter Barker
bdcb48d835
AP_Mount: use enum class for AltFrame enumeration
2019-03-19 10:31:18 +11:00
Peter Barker
d18dee178d
AP_Mount: remove pointless includes
2019-02-19 09:16:26 +11:00
Tom Pittenger
4e9d026448
AP_Mount: remove HAL_CPU_CLASS_150 check, 150 is already a minimum requirement
2019-02-17 13:00:13 -08:00
Tom Pittenger
3bbd80a5de
AP_Mount: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Matt
e7dcee0dd8
AP_Mount: Solo gimbal params use HAVE_PAYLOAD_SPACE
...
Adds the HAVE_PAYLOAD_SPACE check to the solo gimbal's driver.
2019-01-22 12:46:49 +11:00
Peter Barker
6fc76a32af
GLOBAL: use AP::logger() and strip redundant Log_ from methods
2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
2f3237143f
AP_Mount: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Peter Barker
828317860a
AP_Mount: adjust for location flags being moved out of union
2019-01-16 11:45:29 +11:00
Michael du Breuil
4b642f8895
AP_Mount: Remove unneeded AP_Buffer include
2018-12-31 11:41:43 +09:00
Pierre Kancir
f1aa4f3f87
AP_Mount: pass vector by const reference
2018-12-22 08:31:32 +09:00
Randy Mackay
9767c74311
AP_Mount: angle_input uses norm_input
2018-12-06 08:00:18 +09:00
Randy Mackay
5046c7fb91
AP_Mount: fix gimbal move to extreme before TX turned on
2018-12-06 08:00:18 +09:00
Andrew Tridgell
f6d564599e
AP_Mount: mark gimbal channel as private
2018-11-24 11:00:37 +11:00
Andrew Tridgell
8f709b7a34
AP_Mount: fixed build warning
2018-11-11 07:08:59 +11:00
Peter Barker
be53782ef1
AP_Mount: add override keyword where required
2018-11-08 11:30:12 +11:00
Peter Barker
0afc9bf724
AP_Mount: SoloGimbal: avoid calling safe_sqrtf
2018-11-05 16:24:29 +11:00
Peter Barker
126065e95c
AP_Mount: trim out dead getDebug method
2018-11-05 16:24:29 +11:00
Peter Barker
8641dcbc31
AP_Mount: SoloGimbal: stop taking reference to AHRS
2018-11-05 11:41:31 +09:00
murata
998dd7207f
AP_Mount: Change from sqrt to safe_sqrt
2018-11-03 15:23:08 +09:00
Michael du Breuil
922d593f3d
AP_Mount: Fix strncpy warning
2018-10-30 16:17:03 -07:00
Michael du Breuil
dda7c615a8
AP_Mount: Suppress clearing non-trival type warning
2018-10-30 16:17:03 -07:00
Peter Barker
178d26f8e3
AP_Mount: add general function for handling mavlink messages
...
AP_Mount: const parameters, add overrides, remove bad virtual declarations
AP_Mount: use AHRS singleton
AP_Mount: make status_msg pure-virtual and add override keyword
AP_Mount: handle deprecated mavlink control and configure msgs
AP_Mount: handle MAV_CMD_DO_MOUNT_CONFIGURE
AP_Mount: rename status_msg method to send_mount_status
2018-10-30 17:19:14 +11:00
Peter Barker
4ae6aeed7e
AP_Mount: add singleton
2018-10-30 17:19:14 +11:00
Peter Barker
c73beffe1b
AP_Mount: factor out a rate_input_rad, const various functions
2018-10-30 11:07:53 +11:00
Peter Barker
0142265f67
AP_Mount: make a copy of ID for mavlink_msg_param_set_send
...
The send function is expecting an array of the full length, so passing i
na null-terminated char* may result in uninitialised data (or
information leak)
2018-10-20 10:17:50 +11:00
Patrick José Pereira
0f42702910
AP_Mount: Remove unused check
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-08-27 23:35:34 +01:00
Peter Barker
2489234fcf
AP_Mount: use rc() method to get rc singleton
2018-08-01 12:11:30 +09:00
Peter Barker
57bc4d8736
AP_Mount: remove un-needed initialisations
...
These objects should always be created with new() or statically.
2018-07-23 13:18:37 +09:00
Michael du Breuil
1e7a06ef6b
AP_Mount: Remove unused ADC include
2018-07-17 09:29:50 +10:00
Peter Barker
9f556197a0
AP_Mount: use ins singleton
2018-03-16 00:37:35 -07:00
Peter Barker
0652c89844
AP_Mount: use dataflash singleton
...
Closes #7550
2018-03-15 07:57:50 +09:00
Peter Barker
ea75dd2d59
AP_Mount: correct compiler warnings
...
In file included from ../../libraries/AP_Mount/SoloGimbal.cpp:5:
../../libraries/AP_Mount/SoloGimbal.h:122:11: warning: private field
'_yaw_rate_ff_ef_filt' is not used [-Wunused-private-field]
float _yaw_rate_ff_ef_filt;
^
../../libraries/AP_Mount/SoloGimbal.h:140:23: warning: private field
'_chan' is not used [-Wunused-private-field]
mavlink_channel_t _chan;
^
2 warnings generated.
2018-03-02 09:26:37 +09:00
Peter Barker
fb3cba3867
AP_Mount: use GPS singleton
2017-12-27 00:58:02 +00:00
Andrew Tridgell
3d2c81ff05
AP_Mount: removed create() method for objects
...
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Lucas De Marchi
563f9bfe89
AP_Mount: add static create method
2017-09-26 03:01:21 +01:00
Lucas De Marchi
b3d8c0fc08
AP_Mount: use DataFlash_Class::instance()
...
Instead of requiring DataFlash_Class reference to be passed
on the init() function, get it from the singleton directly.
2017-09-26 03:01:21 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas
823bf217d9
AP_Mount: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Pierre Kancir
0be022694a
AP_Mount: example fix travis warning
...
missing function declaration
implicit cast
some style fix
2017-04-13 19:56:16 +01:00
Michael du Breuil
7f11cf3ca6
AP_Mount: Remove solo gimbal from the minimal build support
2017-03-06 11:53:08 +11:00
murata
2d32211c81
AP_Mount: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Andrew Tridgell
4173432542
AP_Mount: adapt to new RC_Channel API
2017-01-12 17:39:37 +11:00
Nacho Carnicero
bc9facf608
AP_Mount: Fix Alexmos gimbal Mavlink targeting mode
2017-01-05 02:16:32 +00:00
priseborough
6d086e0c31
AP_Mount: remove EKF1
2016-12-19 08:07:10 +11:00
Przemek Lekston
6d65b351cd
AP_Mount: allow computation of gps point target in earth fixed frame
2016-12-01 18:42:48 +09:00
murata
c808ee2f49
Global: To nullptr from NULL.
...
RC_Channel: To nullptr from NULL.
AC_Fence: To nullptr from NULL.
AC_Avoidance: To nullptr from NULL.
AC_PrecLand: To nullptr from NULL.
DataFlash: To nullptr from NULL.
SITL: To nullptr from NULL.
GCS_MAVLink: To nullptr from NULL.
DataFlash: To nullptr from NULL.
AP_Compass: To nullptr from NULL.
Global: To nullptr from NULL.
Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Lucas De Marchi
ae53920e5b
build: don't build examples with old build system
...
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file. Having the makefiles
there is misleading since people try to build and realize the build is
broken.
2016-10-11 13:03:08 +11:00
Murilo Belluzzo
077e03678f
Global: Adapt Stream class to be used with Ringbuffer
2016-08-03 01:44:02 -03:00
Andrew Tridgell
1f2216982d
AP_Mount: fixed typo
2016-07-01 15:35:34 +10:00
Gustavo Jose de Sousa
f9cb760691
AP_Mount: use ARRAY_SUBSCRIPT instead of bytes field
...
That fixed compilation issues and seems more semantically correct. Using array
of length 0 fails compilation because of -Werror=array-bounds in GCC 6.1.
2016-06-23 21:02:05 -03:00
Andrew Tridgell
ac8c4d9beb
AP_Mount: use zero length flexible arrays in unions
2016-05-25 19:55:49 +10:00
Andrew Tridgell
f377787444
AP_Mount: always build with MAVLink2 headers
2016-05-21 15:25:16 +10:00
Andrew Tridgell
ec62d8f4ca
AP_Mount: use HAVE_PAYLOAD_SPACE()
2016-05-21 15:25:14 +10:00
Andrew Tridgell
0ef5d8995b
AP_Mount: support mavlink2 build
2016-05-21 15:25:12 +10:00
Lucas De Marchi
421b9ef54a
AP_Mount do not use flexible array in union
...
We actually don't want a flexible array in this union, but rather a way
to access it byte by byte. This fixes the build for gcc >= 6
In file included from ../../libraries/AP_GPS/AP_GPS_UBLOX.cpp:23:0:
../../libraries/AP_GPS/AP_GPS_UBLOX.h:387:23: error: flexible array member in union
uint8_t bytes[];
^
compilation terminated due to -Wfatal-errors.
In file included from ../../libraries/AP_Mount/AP_Mount.cpp:9:0:
../../libraries/AP_Mount/AP_Mount_Alexmos.h:291:23: error: flexible array member in union
uint8_t bytes[];
^
compilation terminated due to -Wfatal-errors.
2016-05-16 13:50:56 -03:00
Ricardo de Almeida Gonzaga
fcbed13533
AP_Mount: Fix typos
2016-05-13 19:20:06 -03:00
proficnc
20a569a4d5
AP_Mount: block forwarding of MAVlink by bitmask
2016-05-12 17:44:09 +10:00
dgrat
6d3b491c02
AP_Math: Replace is_equal with a type safe template function
...
It makes sense to consider also other floating point types.
2016-05-10 11:41:26 -03:00
dgrat
41661f815f
AP_Math: Replace the pythagorous* functions with a variadic template
...
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
skyscraper
8b9c96814b
AP_Mount: Fix up after RC_Channels refactor
...
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to get and set functionsss
old public member(int16_t) get function -> int16_t set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in c.get_radio_in() c.set_radio_in(v)
c.control_in c.get_control_in() c.set_control_in(v)
c.servo_out c.get_servo_out() c.set_servo_out(v)
c.pwm_out c.get_pwm_out() // use existing
c.radio_out c.get_radio_out() c.set_radio_out(v)
c.radio_max c.get_radio_max() c.set_radio_max(v)
c.radio_min c.get_radio_min() c.set_radio_min(v)
c.radio_trim c.get_radio_trim() c.set_radio_trim(v);
c.min_max_configured() // return true if min and max are configured
Because data members of RC_Channels are now private and so cannot be written directly
some overloads are provided in the Plane classes to provide the old functionality
new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);
new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;
Rename functions
RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)
RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)
Rationale:
RC_Channel is a complicated class, which combines
several functionalities dealing with stick inputs
in pwm and logical units, logical and actual actuator
outputs, unit conversion etc, etc
The intent of this PR is to clarify existing use of
the class. At the basic level it should now be possible
to grep all places where private variable is set by
searching for the set_xx function.
(The wider purpose is to provide a more generic and
logically simpler method of output mixing. This is a small step)
2016-05-10 16:21:15 +10:00
Lucas De Marchi
3a771bf0e3
AP_Mount: replace header guard with pragma once
2016-03-16 18:40:42 +11:00
Randy Mackay
e502e0fc2e
SoloGimbal: resolve compiler warning re float comparison
2016-03-01 21:51:43 +09:00
Randy Mackay
438769c8ae
SoloGimbal: resolve compiler warning re initialisation order
2016-03-01 21:51:41 +09:00
dgrat
5148e41c1a
AP_Math: Cleaned macro definitions
...
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
2016-02-27 02:51:33 -03:00
Tom Pittenger
a9c985bfb3
AP-Mount: compiler warning
...
ardupilot/libraries/AP_Mount/SoloGimbal_Parameters.cpp:193:107: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
2016-02-17 14:54:31 -08:00
Peter Barker
09525e8568
AP_Mount: remove redundant include dependant on bad #define
2016-01-30 12:48:05 -02:00
Jonathan Challinger
5b834330cb
AP_Mount: merge SoloGimbal from solo master
2016-01-23 10:35:40 +09:00
Jonathan Challinger
eabede692e
AP_SmallEKF: move to AP_Mount/SoloGimbalEKF and merge solo version
2016-01-23 10:35:38 +09:00
Gustavo Jose de Sousa
c2e3f05dbf
waf: ardupilotwaf: prefix build context methods with ap_
...
It helps to distinguish between things from waf and things from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa
3d22490397
waf: examples: use methods from bld instead of ardupilotwaf
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa
d281067bcc
waf: make example binaries be placed in 'examples' dir
...
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
2016-01-15 16:46:41 -02:00
Randy Mackay
ccd3725f63
AP_Mount_Servo: remove out of date comment
2016-01-04 11:23:41 +09:00
Jonathan Challinger
62701448ca
AP_Mount: fix example build
2015-12-29 10:46:35 -08:00
Lucas De Marchi
a096703b06
Global: don't link with AP_Progmem
...
AP_Progmem is not used anymore.
2015-12-27 15:58:12 -02:00
Don Gagne
964d02065a
Mount: add missing RebootRequired to param description
2015-12-26 10:06:14 +09:00
Jonathan Challinger
63caca1d3f
AP_Mount: reflect renamed function in AP_AHRS
2015-12-18 18:08:37 +11:00
Lucas De Marchi
f1de9c25fe
AP_Mount: remove unused AP_ADC_AnalogSource
2015-12-03 13:32:43 +11:00
Caio Marcelo de Oliveira Filho
6e7b73610d
waf: add waf support
2015-12-03 07:54:30 +11:00
Caio Marcelo de Oliveira Filho
0b2184b818
AP_Mount: use millis/micros/panic functions
2015-11-20 12:32:24 +09:00
Andrew Tridgell
8f4ce7f20b
build: removed all nocore.inoflag files
...
these were APM2 specific
2015-11-16 08:05:17 +11:00
Lucas De Marchi
ad094b9073
AP_Mount: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1
2015-11-04 12:14:12 +11:00
Lucas De Marchi
5244559010
Minimize AP_Progmem.h includes
...
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.
In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
2015-10-30 14:35:32 +09:00
Lucas De Marchi
6f4904189b
Replace use of println_P() with println()
2015-10-30 14:35:22 +09:00
Lucas De Marchi
831d8acca5
Remove use of PROGMEM
...
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi
2c38e31c93
Remove use of PSTR
...
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Jonathan Challinger
c762865d66
AP_Mount: use configured function to determine if MNT_TYPE has been configured
2015-10-26 11:15:54 +11:00
Caio Marcelo de Oliveira Filho
42a111f5df
AP_Mount: remove unnecessary board include from example
2015-10-21 09:16:12 +11:00
Caio Marcelo de Oliveira Filho
ec52df991c
build: compile only the HAL files needed by the board
...
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho
2e464a53c2
AP_HAL: make code not depend on concrete HAL implementations
...
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.
A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.
The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.
Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.
The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
2015-10-21 09:16:07 +11:00
Randy Mackay
3d7ec3704d
Mount: add param descriptions to allow RC9 ~ RC12 inputs to be used to control gimbal
2015-09-29 16:41:51 +09:00
Randy Mackay
fa0aa6f5c9
Mount: remove support for do-mount-configure as command long
...
Also fix bug in do-mount-control so that do-mount-control can switch mount into retract mode
Also removes ability to set which axis are stabilized through
ardupilotmega mount_configure message
2015-09-06 16:01:18 +09:00
squilter
cc58ec917c
Mount: add support for do_mount_control via command_long
2015-09-06 16:01:12 +09:00
fillycheezstake
39dae7a156
Mount: fix for STORM32 serial ver 78e and higher
...
This fixes the structs to be compatible with the changes OlliW made to
the gimbal firmware.
http://www.olliw.eu/storm32bgc-wiki/Serial_Communication
2015-08-25 13:45:33 +09:00
Lucas De Marchi
2011c4d988
AP_HAL_Mount: standardize inclusion of libaries headers
...
Do the missing header changes due to changing the code before the pr
getting accepted.
2015-08-18 17:12:52 +10:00
Gustavo Jose de Sousa
8011579c5a
AP_Mount: standardize inclusion of libaries headers
...
This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
2015-08-11 16:38:20 +10:00
Randy Mackay
b13921a7aa
Mount_SToRM32: find gimbal channel on startup
2015-07-25 10:53:05 +09:00
Randy Mackay
cc0ab26f5d
Mount: fix init of mode
...
Mode was being set from MNT_DEFTL_MODE parameter before that parameter's
value had been initialised from eeprom
2015-07-16 14:14:01 +09:00
Randy Mackay
1d732ddf62
Mount: param desc rename from MAVLink to 3DR Solo
2015-07-07 13:29:24 +09:00
Grant Morphett
84ac8abc42
AP_Mount: Fixed a bug with wrapping of panning angles.
2015-06-22 09:32:26 +09:00
Randy Mackay
0b6323d5ed
Mount: default MNT_TYPE to servo gimbal if rc outputs defined
2015-06-10 16:47:08 +09:00
Randy Mackay
b8e3fe8f26
Mount: AlexMos fix to stop crashing before init
2015-06-05 12:31:16 +09:00
Randy Mackay
66d2328163
Mount: Alexmos save 4 bytes of RAM
2015-06-05 12:31:14 +09:00
Randy Mackay
7a8fe5f4d4
Mount: Alexmos formatting fixes
2015-06-05 12:31:12 +09:00
Andrew Tridgell
83b46243db
AP_Mount: convert example from .pde to .cpp
2015-06-01 17:07:05 +10:00
Andrew Tridgell
1400d0155c
AP_Mount: fixed valgrind error with gimbal code
2015-05-27 11:54:17 +10:00
Randy Mackay
fb2d29364e
Mount_SToRM32_serial: fix angle request
2015-05-26 21:05:29 +09:00
Randy Mackay
9b04a67e63
Mount_SToRM32_serial: rename sent_do_mount_control
2015-05-26 21:05:26 +09:00
Randy Mackay
72eb25b166
Mount: add SToRM32 serial to front end
2015-05-26 21:05:24 +09:00
Sergey Kirillov
c133511431
Mount: add SToRM32 serial support
2015-05-26 21:05:22 +09:00
Andrew Tridgell
d96e62cce7
AP_Mount: update gimbal for changed quaternion API
2015-05-25 09:08:45 +10:00
Andrew Tridgell
19419fd901
AP_Mount: fixed reporting of MAVLink gimbal position to GCS
2015-05-24 15:24:02 +10:00
Andrew Tridgell
730644eaeb
AP_Mount: use M_PI_F instead of (float)M_PI
2015-05-05 13:44:25 +10:00
Andrew Tridgell
7c9e3d4b58
AP_Mount: revert AP_Math class change
2015-05-05 13:27:06 +10:00
Tom Pittenger
4ac1f8a2fa
AP_Mount: compiler warnings: apply is_zero(float) or is_equal(float)
2015-05-05 13:26:54 +10:00
Andrew Tridgell
d8ca0658d7
AP_Mount: fixed some build warnings
2015-05-05 09:45:58 +10:00
Randy Mackay
8ced9cc904
Gimbal: only include for high performance CPUs
2015-04-21 21:47:18 +09:00
Randy Mackay
93ba2d2d32
Mount_MAVLink: uses vehicle's sysid
2015-04-21 21:47:17 +09:00
Randy Mackay
e726a05f3b
Gimbal: fix to parameter init order
...
resolves a compiler warning
2015-04-21 21:47:16 +09:00
Randy Mackay
e9b2153672
Gimbal: formatting fixes
...
Also isCopterFlipped returns bool instead of uint8_t
No functional change
2015-04-21 21:47:15 +09:00
Randy Mackay
db6bb295c7
Mount: add gimbal parameter descriptions
2015-04-21 21:47:14 +09:00
Jonathan Challinger
231f776dd7
AP_Gimbal: change isCopterFlipped()
2015-04-21 21:45:52 +09:00
Arthur Benemann
21b909f670
AP_Gimbal: report gimbal angles using a 312 rotation vector
2015-04-21 21:45:50 +09:00
Arthur Benemann
2850c7ab4a
AP_Gimbal: nest AP_Gimbal files into AP_Mount library
2015-04-21 21:45:49 +09:00
Arthur Benemann
255c5b3025
AP_Mount: report MAVLink gimbal angle to the GCS
2015-04-21 21:45:45 +09:00
Arthur Benemann
4bdf909bbf
AP_Mount: Create new copter parameters to hold gimbal settings
2015-04-21 21:45:43 +09:00
Arthur Benemann
a05fe7e117
AP_Gimbal: Re-implement the target low-pass filter
2015-04-21 21:45:40 +09:00
Arthur Benemann
b3dd8891c8
AP_Mount: Use AP_Gimbal on the AP_Mount_MAVLink class
2015-04-21 21:45:38 +09:00
Arthur Benemann
558a69bdca
Mount_MAVLink: remove code now in AP_Gimbal
2015-04-21 21:44:56 +09:00
Randy Mackay
44d2ae06fb
Mount: unix style line endings
2015-04-17 22:59:34 +09:00
Andrew Tridgell
df948e7358
AP_Mount: fixed for new GIMBAL_REPORT message
2015-04-06 16:42:23 -07:00
Randy Mackay
1ed7737669
Mount: integrate Serial Manager instance
2015-04-01 14:59:21 -07:00
Randy Mackay
8a3a7bdcd1
Mount: add set_angle_target method
2015-03-21 21:52:22 +09:00
Randy Mackay
2189b16165
Mount_SToRM: remove message throttling
...
recent versions of gimbal firmware can handle 50hz update rate
2015-03-21 05:56:18 +09:00
Randy Mackay
b3362d5829
Mount: calc_angle_to_location returns vehicle relative yaw
2015-03-21 05:56:16 +09:00
Randy Mackay
d2739c5ce5
Mount_SToRM: slow updates to 10hz, reverse yaw, pitch
2015-03-20 20:46:45 +09:00
Paul Riseborough
9c2f1ce869
AP_Mount: Fix bug in mavlink gimbal attitude control
2015-03-16 09:54:43 +11:00
Jonathan Challinger
dff899647f
AP_Mount: use AP_AHRS_TYPE instead of AP_AHRS_MOUNT
2015-03-16 09:14:03 +11:00
Jonathan Challinger
7b0e806db1
AP_Mount: correct status_msg to conform to MAVLink specification
2015-02-21 08:33:50 +09:00
Randy Mackay
73e00108e4
Mount: SToRM32 remove unnecessary include
2015-02-20 11:27:15 +09:00
Randy Mackay
23f0bab5d6
Mount: integrate SToRM32 backend
2015-02-20 11:05:40 +09:00
Randy Mackay
92c7949355
Mount: SToRM32 mount backend
2015-02-20 11:05:31 +09:00
Andrew Tridgell
50a11c7d5a
AP_Mount: added an alternative tilt-only gimbal control method
...
this adds some nice control characteristics based on work by Paul and
Arthur, but is tilt only
2015-02-16 16:48:55 +11:00
Andrew Tridgell
2f3b5006e7
AP_Mount: fixed build of example sketches
2015-02-09 11:49:10 +11:00
Andrew Tridgell
fa7c584733
AP_Mount: fixed build on non-EKF systems
2015-02-03 09:49:17 +11:00
Andrew Tridgell
f77f919588
AP_Mount: enable pan pointing in MAVLink backend
2015-02-03 09:49:17 +11:00
Andrew Tridgell
81f60bde06
AP_Mount: fill in all Location flags in ROI pointing
2015-02-03 09:49:17 +11:00
Andrew Tridgell
cf76dcfbf3
AP_Mount: fixed mount MAVLink backend to match SITL sim behaviour
...
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2015-02-03 09:49:17 +11:00
Andrew Tridgell
75b1330843
AP_Mount: fixed radians to degrees error
2015-02-03 09:49:17 +11:00
Andrew Tridgell
032dcc3660
AP_Mount: fixed references to state in backends
2015-02-03 09:49:17 +11:00
Paul Riseborough
8d6f0d08c9
AP_Mount: Update attitude control calculations and debug printing
2015-02-03 09:49:17 +11:00
Paul Riseborough
1660aefc90
AP_Mount: Add a simple attitude control loop to the gimbal report handling
2015-02-03 09:49:16 +11:00
Andrew Tridgell
79017096e2
AP_Mount: prototype code to send biases
2015-02-03 09:49:16 +11:00
Andrew Tridgell
da27a8696d
AP_Mount: added initial ekf estimation of gimbal bias
...
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2015-02-03 09:49:16 +11:00
Andrew Tridgell
01b264951a
AP_Mount: added handling of GIMBAL_REPORT messages
2015-02-03 09:49:15 +11:00
Andrew Tridgell
79cad28a25
AP_Mount: simplify some uses of frontend
2015-01-29 17:23:33 +11:00
Andrew Tridgell
60f266da19
AP_Mount: update for new find_serial() interface
2015-01-29 15:36:38 +11:00
Matthias Badaire
5f432eaa2d
AP_Mount_Alexmos : take into account available negative numbers
...
uartdriver->available () function brings back a signed int, we should be carefull to avoid an endless loop if that happens.
2015-01-29 14:05:15 +11:00
Randy Mackay
4a4387530a
Mount: remove unused num_instances
2015-01-29 14:05:14 +11:00
Randy Mackay
d6433266d2
Mount_MAVLink: use SerialManager for init
...
use serial_manager's get_mavlink_channel
2015-01-29 14:05:14 +11:00
Randy Mackay
4848b03ac6
Mount_AlexMos: use SerialManager for init
2015-01-29 14:05:14 +11:00
Randy Mackay
56f872b38c
Mount_Servo: use SerialManager for init
2015-01-29 14:05:13 +11:00
Randy Mackay
886cc9aa46
Mount: use SerialManager for init
2015-01-29 14:05:13 +11:00
Randy Mackay
ee369f8a0d
Mount_AlexMos: use reference to state
2015-01-29 14:05:11 +11:00
Randy Mackay
b083c99966
Mount_MAVLink: use reference to state
2015-01-29 14:05:11 +11:00
Randy Mackay
32ea258594
Mount_Servo: use reference to state
2015-01-29 14:05:10 +11:00
Randy Mackay
acbcf3c54e
Mount: backends use reference to their state
2015-01-29 14:05:10 +11:00
Randy Mackay
bf82e82282
Mount_MAVLink: remove unused _enable and find_mount
2015-01-29 14:05:10 +11:00
Randy Mackay
b5127b680f
Mount: set primary to first instance
2015-01-29 14:05:10 +11:00
Matthias Badaire
24af65a41a
AP_Mount_Alexmos: critical fix to avoid endless loop if byte arrive to fast in serial buffer
...
This fix reads the number of bytes available and iterates on it instead of looking for new bytes in the serial buffer (potentially forever)
2015-01-29 14:05:10 +11:00
Matthias Badaire
46e92f99fe
AP_Mount_Alexmos: use struct for CMD_CONTROL command
...
new struct created in header and used in control_axis function
2015-01-29 14:05:09 +11:00
Matthias Badaire
81d60af4a8
AP_Mount_Alexmos : cleanup initialization of class fields
2015-01-29 14:05:09 +11:00
Randy Mackay
c5ef5d21d3
Mount: add Alexmos to MNT2_TYPE param description
2015-01-29 14:05:09 +11:00
Randy Mackay
93323e2136
Mount_Alexmos: comments and formatting
...
No functional change
2015-01-29 14:05:09 +11:00
Matthias Badaire
1e5ddf3ce7
AP_Mount_Alexmos : make sure get_angles is called to get the real angles from the gimbal
...
get_angles calls the Alexmos API to get the current angles. It was not being called before.
2015-01-29 14:05:09 +11:00
Matthias Badaire
0b88f15a37
AP_Mount: fix Backend enum for AP_Mount_Alexmos and add comments
...
fix Backend enum for AP_Mount_Alexmos and add comments
2015-01-29 14:05:09 +11:00
Matthias Badaire
cdeb1fb8f3
AP_Mount_Alexmos : changes some define to avoid conflicting
...
change SPEED to AP_MOUNT_ALEXMOS_SPEED and the control mode defines as well
2015-01-29 14:05:08 +11:00
Matthias Badaire
6e5e438b0f
AP_Mount: Make use of the new AP_Mount_Alexmos backend
...
This is adding AP_Mount_Alexmos as one of the available backend
2015-01-29 14:05:08 +11:00
Matthias Badaire
dfc086f9e9
AP_Mount_Alexmos : Add Alexmos Serial support for 8bit cards
...
This is the initial implementation of Alemox gimbal protocol. the uart output is for the moment hard coded but should become a parameter.
2015-01-29 14:05:08 +11:00
Randy Mackay
66ad56161b
Mount_MAVLink: fix to calc_angle_to_location params
2015-01-29 14:05:08 +11:00
Randy Mackay
f509dad991
Mount_Servo: bug fix to calc_angle_to_location params
2015-01-29 14:05:08 +11:00
Randy Mackay
a78309734d
Mount_MAVLink: remove set_roi_target, configure
...
These methods are now in the backend
2015-01-29 14:05:07 +11:00
Randy Mackay
99c35d5cf7
Mount_Servo: remove set_roi_target, configure
...
These methods are now in the backend
2015-01-29 14:05:07 +11:00
Randy Mackay
72fec52f0f
Mount_Backend: move set_roi_target, configure to backend
2015-01-29 14:05:07 +11:00
Randy Mackay
efeb05876e
AP_Mount: initialise mode to default
2015-01-29 14:05:07 +11:00
Randy Mackay
ace1fd8740
Mount_MAVLink: handle RC and GPS targeting in lib
...
Previously we expected the mount to do this but it is likely that the
first versions of MAVLink enable mounts will only be capable of pointing
at a particular angle
2015-01-29 14:05:07 +11:00
Randy Mackay
9d4210b82a
Mount_Backend: move RC target handling to backend
2015-01-29 14:05:07 +11:00
Randy Mackay
b3044ced1f
Mount_Backend: move calc_angle_to_lcoation to backend
2015-01-29 14:05:07 +11:00
Randy Mackay
8fabacf5ff
Mount_MAVLink: use sysid from vehicle, compid of 10
2015-01-29 14:05:06 +11:00
Randy Mackay
6af5a6687f
Mount: add params for second mount
2015-01-29 13:57:19 +11:00
Randy Mackay
5d30af233a
Mount: move param underscore to lib
2015-01-29 13:57:18 +11:00
Randy Mackay
2ed4ca409c
Mount_Servo: check_servo_map every 3sec
2015-01-29 13:57:18 +11:00
Randy Mackay
cb5a122dab
Mount_Servo: add set_mode
2015-01-29 13:57:17 +11:00
Randy Mackay
a41ff2375b
Mount_Backend: add set_mode virtual method
2015-01-29 13:57:17 +11:00
Randy Mackay
ef719b145b
Mount: rename MODE to DFLT_MODE, move set_mode to backend
2015-01-29 13:57:17 +11:00
Randy Mackay
6c766051e8
Mount_MAVLink: minimalist mavlink backend
...
We assume MAVLink enabled mount will do all the hard work of support all modes
2015-01-29 13:57:17 +11:00
Randy Mackay
8a9df1c894
Mount_Servo: Servo functions moved to backend
2015-01-29 13:57:17 +11:00
Randy Mackay
7df2892b8d
Mount_Backend: add backend class
2015-01-29 13:57:17 +11:00
Randy Mackay
88db50c3a7
Mount: parent class becomes front-end
2015-01-29 13:57:17 +11:00
Randy Mackay
314eb2536f
Mount: fix example sketch
2015-01-28 17:15:46 +09:00
Andrew Tridgell
411766f45a
AP_Mount: removed use of mavlink_check_target()
2014-12-11 12:32:27 +09:00
Andrew Tridgell
78db698108
AP_Mount: allow a MOUNT_CONTROL message to reset RC targetting
...
fixes issue #1617
2014-11-18 13:35:11 +11:00
Andrew Tridgell
14467b75a1
AP_Mount: use norm_input_dz()
...
this makes rc targeting much easier without drift
2014-11-18 12:44:29 +11:00
Arthur Benemann
f7f9bedc38
AP_Mount: update the status_msg() method to match the new definition
2014-11-17 15:59:23 -08:00
Jason Short
7ee5b58535
AP_Mount: Axis mask speedup
...
Using a simple bit mask to avoid calculating an unneeded ATAN2() for AVR users.
2014-11-14 13:51:16 +11:00
Jonathan Challinger
d03ed7a2c3
AP_Mount: Added lead filter
2014-11-06 07:35:32 +11:00
Ju1ien
1c96bf0b1d
AP_Mount.cpp - correct units in description
...
That should be corrected also in MP as the current code is expecting
degrees, not centidegrees.
2014-08-25 15:55:07 +09:00
Randy Mackay
039f4740ce
Mount: correct comment on set_mode_to_default time
2014-08-14 11:27:34 +09:00
Randy Mackay
5614e42063
Mount: init members to resolve compiler warnings
2014-08-14 11:27:33 +09:00
Andrew Tridgell
fddf895d66
AP_Mount: fixed example build
2014-08-13 21:48:36 +10:00
Andrew Tridgell
6ea68b318e
AP_Mount: fixed example build
2014-07-25 17:54:58 +10:00
svefro
be9bfc5530
Mount: set_mode method made public
2014-07-10 13:03:43 +09:00
Michael Oborne
30a3927ea8
AP_Mount: fix where status_msg() is sent
...
send to the channel where the trigger msg was sent from
2014-06-18 12:03:18 +10:00
Andrew Tridgell
eb67948171
AP_Mount: convert to new GPS API
2014-04-01 06:38:24 +11:00
Andrew Tridgell
6eece3a278
AP_Mount: fixed example build
2014-03-19 12:13:50 +09:00
Randy Mackay
1c457d8448
Mount: add get_mode and set_mode_to_default methods
2014-03-05 16:01:11 +09:00
Don Gagne
e68cf2d1c5
Plane: Fix parameter documentation
...
Fixes some problems with incorrect docs which would in turn generate
bad amp.pdef.xml files for ground stations.
merge with below
2014-01-09 14:02:21 +09:00
Andrew Tridgell
4de2a654ab
AP_Mount: changed ahrs to be a const reference
...
saves a bit of code
2013-10-13 11:03:24 +09:00
Andrew Tridgell
a67413d495
AP_Mount: changed to AP_Vehicle.h
2013-09-13 11:44:54 +10:00
Andrew Tridgell
905e07edf9
AP_Mount: fixed examples build
2013-08-30 13:01:39 +10:00
Andrew Tridgell
206ed04e76
AP_Mount: fixed example build
2013-07-15 14:10:50 +10:00
Andrew Tridgell
033828aeb6
AP_Mount: make the code a bit easier to read
2013-06-03 16:23:48 +10:00
Andrew Tridgell
9076f6a1d0
AP_Mount: use RC_Channel::rc_channel() instead of rc_ch[]
2013-06-03 16:23:47 +10:00
Andrew Tridgell
1cc02836a0
AP_Mount: fixed indent-tabs-mode
2013-05-30 09:51:24 +10:00
tobias
217b8d7a59
cleanup: use const for struct Location pointers and references
...
this allows the compiler to generate more efficient code
2013-04-09 12:10:32 +10:00
Andrew Tridgell
26fedc543c
AP_Mount: fixed scaling of the joystick speed to give better control
...
thanks to Chris Miser for reporting this problem
2013-03-08 14:39:32 +11:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
rmackay9
cf409abc63
AP_Mount: add parameter descriptions
2013-01-02 16:47:39 +09:00
Andrew Tridgell
374af1cd14
build: change from Arduino.mk to apm.mk
2013-01-02 17:29:37 +11:00
Andrew Tridgell
ceb3f577d8
libraries: use new math functions
2012-12-20 14:53:22 +11:00
Andrew Tridgell
a1187519a8
AP_HAL: use AP_HAL_BOARD_DRIVER in remaining test sketches
2012-12-20 14:52:37 +11:00
Pat Hickey
eb530b86e8
move Arduino.mk to /mk/Arduino.mk
2012-12-20 14:52:35 +11:00
Andrew Tridgell
7d27e420ae
AP_HAL: remove unnecessary Arduino.h includes
2012-12-20 14:52:30 +11:00
Andrew Tridgell
9d1f43928c
Mount: updates for new AP_Param API
2012-12-20 14:51:39 +11:00
Pat Hickey
475da4eca4
CONFIG_HAL_BOARD - test sketches fixed up, build all passes
2012-12-20 14:51:37 +11:00
Pat Hickey
6cc231ae7d
AP_Mount: ported to AP_HAL
...
I do not have the hardware required to test this
2012-12-20 14:51:29 +11:00
rmackay9
6bbf66697b
AP_Mount: resolve compiler warning about unused mount_open variable
2012-11-07 23:29:25 +09:00
Andrew Tridgell
f41270a3ce
AP_Mount: updated for new RC_Channel_aux API
2012-09-08 15:12:52 +10:00
Amilcar Lucas
b48a1f1fc4
ArduPlane: Fix 1280 builds
...
Added fine-granular features in the AP_Mount class to reduce code size on 1280 chips
Remove camera trigger support on 1280 chips
2012-08-27 01:33:45 +02:00
Amilcar Lucas
769f04b7d6
Improve comments, no functional changes
2012-08-27 01:32:27 +02:00
Amilcar Lucas
7a0c47d049
Improve comment aligment
2012-08-27 00:37:10 +02:00
uncrustify
7ffa44c324
uncrustify libraries/AP_Mount/AP_Mount.h
2012-08-21 19:04:08 -07:00
uncrustify
ff555dfb7a
uncrustify libraries/AP_Mount/AP_Mount.cpp
2012-08-21 19:04:08 -07:00
Amilcar Lucas
32e354be4e
AP_Mount: Reduce parameter name length, to allow MNT2_* strings to be smaller than the limit of 15 characters
2012-08-10 00:16:52 +02:00
Amilcar Lucas
0b0b9c29a2
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
Amilcar Lucas
530ea0bebd
AP_Mount: Enable Joystick speed code, now that the framework supports more than 16 parameters per group.
...
Save some bytes by skiping the redundant *_rc_in initialization in the AP_Mount() constructor
2012-08-08 22:45:36 +02:00
Andrew Tridgell
45c27317ef
AP_Mount: fixed defaults for angles
...
this saves some eeprom space by not saving the 4500 values
2012-08-08 13:04:49 +10:00
Andrew Tridgell
518d6365ff
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Amilcar Lucas
2c4a0636f3
AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo
2012-08-06 01:27:29 +02:00
Amilcar Lucas
107155fa1a
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
rmackay9
bb05dab924
AP_Mount: addition of Amilcar's mount_type
...
set_roi_cmd modified to take a Location. I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
2012-07-25 11:00:38 +09:00
rmackay9
e61cf0e1f9
AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux)
...
For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.
2012-07-18 23:20:05 +09:00
Amilcar Lucas
1da0ce20ce
Improve parameter documentation, it still does not work, but is an improvement.
...
I just do not understand why these parameters do not appear in Mission planner :(
2012-07-17 23:32:30 +02:00
Amilcar Lucas
cc02d85cdf
AP_Mount: add support for non-spring-loaded joysticks
2012-07-11 00:07:33 +02:00
Amilcar Lucas
46d20c2d6b
Remove unused function, remove unnecessary angle wrapping.
2012-07-11 00:06:45 +02:00
Amilcar Lucas
bccb07cbd0
Allow mount control when no AHRS exists
...
Allow mount control on non stabilized axes
2012-07-11 00:06:26 +02:00
Amilcar Lucas
46552b4222
AP_Mount: Fix radians/degrees scaling regressions
...
Rename calculate() into stabilize()
Implement MAV_MOUNT_MODE_RC_TARGETING initialization
Document to make sure this radians/degrees mess up does not happen again
2012-07-07 21:56:56 +02:00
Amilcar Lucas
0febf76d9d
Document++
2012-07-05 00:33:46 +02:00
Amilcar Lucas
e9c72822dc
Remove unused function
2012-07-05 00:33:10 +02:00
Andrew Tridgell
060cbe2030
AP_Mount: removed unused enum
2012-07-03 10:39:34 +10:00
Andrew Tridgell
99b11e4f19
Mount: enable mount control via eeprom parameters
...
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
2012-07-03 10:21:01 +10:00
Amilcar Lucas
f4e9587aca
Move local temp variables to the stack it saves 1952 bytes
...
Add function comments
Only use _ on class member variables
Only point to a 3D GPS point if GPS has a fix
Implement MAV_MOUNT_MODE_MAVLINK_TARGETING
2012-06-17 22:25:51 +02:00
Amilcar Lucas
a32b7c200b
Add "3 axis camera stabilization" and "point camera to 3D point" functionality
...
Patch by Gregory Fletcher and reviewed by me
2012-06-13 20:55:19 +02:00
Andrew Tridgell
8ae0ea7e37
AP_Mount: adapt library for AHRS framework
2012-03-19 17:29:02 +11:00
rmackay9
952e5d7bbc
AP_Mount - #include FastSerial first to allow it to compile under Arduino 1.0
2012-02-26 15:31:56 +09:00
Amilcar Lucas
ab730ff919
Added camera and/or antenna mount support.
...
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
2011-10-31 22:55:58 +01:00
Amilcar Lucas
b3d4bb1478
Again remove some more files from the APM_Camera branch
2011-09-10 12:51:48 +02:00
Amilcar Lucas
a8e68040f5
These files are not meant to be in master, they should only be in the APM_Camera branch for now
2011-09-09 16:37:42 +02:00
joeholdsworth@gmail.com
85bcbef695
nightly check in, version not stable.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3164 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 20:36:30 +00:00
joeholdsworth@gmail.com
085ca253be
Checkin before beddy byes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3154 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-22 21:50:11 +00:00
joeholdsworth@gmail.com
bf4058c6e1
change of mind payloads should be split into their separate folders.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3144 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:58:15 +00:00