Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,114 Commits 71 Branches 509 Tags 772 MiB
Commit Graph

1130 Commits

Author SHA1 Message Date
Andrew Tridgell 2ba9ce60e3 Plane: fixed comment 2013-08-30 13:01:34 +10:00
Andrew Tridgell 8733391315 Plane: call airspeed MAVLink logging function 2013-08-30 13:01:34 +10:00
Andrew Tridgell 5cec9b65c9 Plane: constrain calibration to roll/pitch limits 2013-08-30 13:01:34 +10:00
Andrew Tridgell 364790414c Plane: support new RADIO_STATUS msg 2013-08-24 17:59:13 +10:00
Andrew Tridgell b16e3e4c85 Plane: changed FBW min to 9 m/s 
6 m/s is too dangerous for widely used planes
 2013-08-18 11:42:23 +10:00
Andrew Tridgell 8dd0aa12ed Plane: prevent GPS speed spikes at startup from breaking airspeed cal 
the filter can be affected by a huge GPS velocity spike
 2013-08-18 11:42:22 +10:00
Andrew Tridgell 4425b6af7c Plane: update for new TECS API 2013-08-14 14:59:01 +10:00
Andrew Tridgell accfd46633 Plane: update for new APM_Control API 2013-08-14 14:57:41 +10:00
Andrew Tridgell 8378dc9779 Plane: use reference to AHRS 2013-08-13 13:49:34 +10:00
Andrew Tridgell 5cfdf52381 Plane: change default modes to FBWA not STABILIZE 2013-08-13 13:42:27 +10:00
Andrew Tridgell d4ca3ebf65 Plane: check for parameter send at default of 10Hz 
50Hz can cause overruns, especially on PX4 which can drain the tx
buffer very rapidly
 2013-08-13 13:42:25 +10:00
Andrew Tridgell a33573352e Plane: fixes for updated AP_Math and AHRS APIs 
Pair-Programmed-With: Brandon Jones <brnjones@gmail.com>
 2013-08-05 10:30:04 +10:00
Andrew Tridgell e22f58c9fc Plane: fixed build with OBC failsafe 2013-08-03 09:18:01 +10:00
Andrew Tridgell 890b77447a Plane: allow integrator in stabilize mode when no stick input 
fixes issue #472
 2013-08-02 21:55:34 +10:00
Andrew Tridgell c083c15240 Plane: use a larger serial buffer 
this makes higher rate MAVLink possible again
 2013-08-02 18:46:54 +10:00
Andrew Tridgell c3b5f20a45 Plane: run TECS 50Hz code when throttle suppressed 
this fixes auto-launch detection using TECS
 2013-08-02 18:46:48 +10:00
Andrew Tridgell 8428779558 Plane: make it easier to find task numbers 2013-08-02 18:46:42 +10:00
Andrew Tridgell 62cc84aba3 Plane: use new scheduler load_average() function 
this also simplifies the main loop
 2013-08-02 18:46:28 +10:00
Andrew Tridgell 233b033e8c Plane: removed old speed/altitude control algorithms 
Use TECS only. This makes the code a lot simpler and easier to
properly document
 2013-07-22 13:28:11 +10:00
Andrew Tridgell c0697d0a2d Plane: mark 2.75beta1 2013-07-22 12:50:30 +10:00
Andrew Tridgell 965dc228c2 Plane: fixed GUIDED mode change of altitude down 2013-07-22 12:50:02 +10:00
Andrew Tridgell b8fa83ff54 Plane: change default slewrate to 100%/second 2013-07-22 12:50:02 +10:00
Andrew Tridgell 29c854e676 Plane: remove unused function 2013-07-22 12:50:02 +10:00
Andrew Tridgell 6e288551ab Plane: fixed reversion to pre-failsafe mode 
if AUTO was entered using GCS, we need to switch back to the old mode,
not control channel
 2013-07-22 12:50:02 +10:00
Andrew Tridgell 74dabad1f3 Plane: added SKIP_GYRO_CAL parameter 
useful for starting the sim at high altitudes, and for starting planes
without having to hold them still
 2013-07-22 12:50:01 +10:00
Andrew Tridgell c8a83e17d0 Plane: remove old AIR_START code 
this was never used or tested
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 7673ca0bac Plane: updates for new EAS2TAS scaling 2013-07-22 12:50:01 +10:00
Andrew Tridgell 9bbe6c1967 Plane: update to new license boilerplate for GPLv3 
we had LGPLv2 in some places, despite the fw being GPLv3
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 882aa68c16 Plane: use new airspeed calibration code 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 53b1b9b575 Plane: added note on type of airspeed in docs 2013-07-22 12:50:01 +10:00
Andrew Tridgell 2d5deddd30 Plane: set mode CIRCLE on short failsafe in AUTO 
this makes the code match the docs
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 9b70675b12 Plane: check the control switch a bit more often 
faster response to mode changes
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 6ed78c89ac Plane: don't read control switch when ch3 is in failsafe 
use ch3_counter not just the final flag
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 51b9cf3e76 Plane: move failsafe variables into a structure 
this makes the logic a bit easier to follow
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 608345415b Plane: pass aircraft parameters to attitude controllers 
also cope with rename of airspeed min/max variables

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-18 14:53:37 +10:00
Andrew Tridgell a4f49a28fb Plane: prepare for 2.74b release 2013-07-16 09:45:32 +10:00
Andrew Tridgell e27dd14bcc Plane: fixed FBWB aileron control 2013-07-16 09:44:23 +10:00
Andrew Tridgell e8355905dd Plane: prepare for 2.74 release 2013-07-15 11:19:38 +10:00
Andrew Tridgell dbd47b2a30 Plane: make TECS the default speed/height controller 2013-07-15 11:12:24 +10:00
Andrew Tridgell ec21922233 Plane: make wp_distance static 
removed hack in AP_Camera library
 2013-07-15 09:56:28 +10:00
Andrew Tridgell 3ba713352f Plane: use update_aux() for setting up extra channels 2013-07-15 09:56:12 +10:00
Andrew Tridgell ed20c4cbc8 Plane: fixed initial reporting of battery remaining 
we were not showing battery remaining 100% until we used some battery
 2013-07-14 21:59:15 +10:00
Andrew Tridgell e80d73df93 Plane: expand docs for TRIM_AUTO 2013-07-14 21:23:15 +10:00
Andrew Tridgell 4087fde140 Plane: enable CTUN log message by default 2013-07-14 21:10:12 +10:00
Andrew Tridgell e79023ceee Plane: fixed problem with slow ground station connects 
don't trigger the "scheduler out of time" code when in the delay
callback

Thanks to Marijm Slootweg for noticing this!
 2013-07-14 17:28:34 +10:00
Andrew Tridgell d4db2231d4 Plane: change to 2.73beta4 2013-07-13 21:47:22 +10:00
Andrew Tridgell dc024d425a Plane: re-do roll hanging in ACRO mode 
this avoids the euler angle zeros of the previous method by using a
gyro integrator on the roll axis

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-13 21:45:58 +10:00
Andrew Tridgell b37f79d307 Plane: update for new APM_Control API 2013-07-13 21:45:58 +10:00
Andrew Tridgell 113bc20f8a Plane: added a new CRUISE flight mode 
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode

this fixes issue #438
 2013-07-13 21:45:58 +10:00
Andrew Tridgell 399970e76f Plane: fixed default deadzone for the throttle channel 
this is the 2nd half of the fix for issue #303
 2013-07-13 13:19:25 +10:00
Andrew Tridgell 826ad6c086 Plane: unlock roll and pitch when we enter ACRO mode 2013-07-13 12:34:34 +10:00
Randy Mackay 1772a62415 Plane: fix to gps present check in mavlink extended status 1 msg 2013-07-13 10:27:39 +09:00
Andrew Tridgell ea9ae31a7a Plane: fixed a bug with altitude drift in FBWB mode 
not taking account of deadzone correctly
 2013-07-12 21:17:09 +10:00
Andrew Tridgell cc57bfcf12 Plane: fixed handling of deadzone in ACRO mode 
RC_Channel norm_input() does not take account of the dead zone
 2013-07-12 17:54:51 +10:00
Randy Mackay 9df93881fb Plane: set_dead_zone renamed to set_default_dead_zone 
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:18 +09:00
Andrew Tridgell f300df5fd1 Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters 
this is to address the issue raised here:

http://diydrones.com/forum/topics/ardupilot-circle-mode
 2013-07-12 11:56:04 +10:00
Andrew Tridgell 73928b82a6 Plane: fixed FBWB airspeed control 
thanks to Gabor for reporting this!
 2013-07-11 11:58:54 +10:00
Andrew Tridgell 1d04290eab Plane: change to 2.74beta3 2013-07-11 11:58:54 +10:00
Andrew Tridgell 11a4628409 Plane: added ACRO mode to mode choices 2013-07-11 09:10:41 +10:00
Andrew Tridgell fc67f51901 Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters 
default to 180 degrees/second, which seems reasonable
 2013-07-11 09:10:41 +10:00
Andrew Tridgell 608007361b Plane: added initial implementation of ACRO mode 
rate based control with attitude locking
 2013-07-11 09:10:41 +10:00
Andrew Tridgell 2005d5642a Plane: fixed a documentation string 
GND_ALT_OFFSET is now for barometric corrections
 2013-07-10 14:46:22 +10:00
Andrew Tridgell 3c97fad2ec Plane: changes for GPS field changes 2013-07-10 14:04:22 +10:00
Andrew Tridgell 7aa360b176 Plane: added relative_altitude helper functions 
prevents some code duplication
 2013-07-10 14:04:22 +10:00
Paul Riseborough 971d36f06b Plane: added height to 10Hz TECS call 2013-07-10 14:04:22 +10:00
Andrew Tridgell 3c177867a4 Plane: allow enable/disable of camera log messages in CLI 2013-07-10 12:23:36 +10:00
Andrew Tridgell f7c8d1e1ee Plane: use current_loc.alt for altitude to TECS 2013-07-10 11:55:35 +10:00
Craig@3DR 7f4336430a Plane: trigger picture + logging on camera update_location() 2013-07-10 08:40:01 +10:00
Paul Riseborough a4f3180e2a Plane: added support for throttle nudging with TECS 2013-07-09 20:51:03 +10:00
Paul Riseborough c34803db13 Plane: pass in adjusted height above field to TECS 2013-07-09 09:25:55 +10:00
Andrew Tridgell 9f612f6f78 Plane: only call TECS when throttle is not suppressed 
this helps prevent integrator buildup on the ground
 2013-07-08 12:07:50 +10:00
Andrew Tridgell 1355b6d89d Plane: break-up scheduling into smaller pieces 
ensure mavlink sends don't push us over a scheduling boundary
 2013-07-05 18:05:27 +10:00
Andrew Tridgell 1d6748cf3f Plane: use a glide slope in RTL when descending 
when above the target altitude in RTL come down slowly, when below
climb rapidly

This fixes issue #39
 2013-07-05 14:56:58 +10:00
Andrew Tridgell d30dd7c3f1 Plane: only run TECS when in an auto-throttle mode 
this prevents integrator buildup in user controlled modes
 2013-07-05 14:55:22 +10:00
Andrew Tridgell dd330885b8 Plane: added compass and baro accumulate functions 2013-07-05 12:59:15 +10:00
Andrew Tridgell 84299c3747 Plane: document ALT_CTRL_ALG=2 2013-07-04 17:00:04 +10:00
Andrew Tridgell 6c7d160ee6 Plane: fixed TECS takeoff detection 2013-07-04 16:56:57 +10:00
Andrew Tridgell a5bda3ffef Plane: changed to using a "aircraft parameters" structure 
this structure can be passed to libraries to give them easy access to
critical user parameters
 2013-07-04 16:56:57 +10:00
Paul Riseborough d62636d309 Plane: added new TECS altitude controller 
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
 2013-07-04 16:56:57 +10:00
Andrew Tridgell f3237b9e5d Plane: update FS_LONG_ACTN and FS_SHORT_ACTN docs 
thanks to Craig for noticing this
 2013-07-02 14:50:04 +10:00
Andrew Tridgell 75ef7c26e1 Plane: update takeoff course when conditions met 
This allows for change of heading before the final takeoff conditions
are met

thanks to Greg Fletcher for suggesting this
 2013-07-01 17:05:13 +10:00
Andrew Tridgell 570ecea6c6 Plane: added secondary rudder support 2013-06-29 17:31:03 +10:00
Andrew Tridgell 0d3faeda90 Plane: update_mount assumes 50Hz, for camera trigger 2013-06-25 12:44:26 +10:00
Andrew Tridgell bb47029564 Plane: enable CAM_TRIGG_DIST parameter 2013-06-25 12:44:26 +10:00
Andrew Tridgell 45f5d05bd2 Plane: enabled RELAY_* parameters 2013-06-25 12:44:26 +10:00
Andrew Tridgell 056e0ca40d Plane: APM2 doesn't have channel 9 PWM output 2013-06-24 13:06:54 +10:00
Paul Riseborough 2204b30e66 Plane: Added APM_Control integrator limits to table used to covert old PID values 2013-06-22 21:59:47 +10:00
Randy Mackay 6ea568d72a Plane: param description change for RC5 ~ RC11 
Reversing the order may avoid duplication of param descriptions in the
auto generated parameter web page
 2013-06-21 09:58:02 +09:00
Randy Mackay 75bcd7cdab Plane: update THR_FS_VALUE parameter description 2013-06-18 15:57:29 +09:00
Andrew Tridgell 4a0c90246e Plane: make GPS UART blocking again 2013-06-11 18:50:23 +10:00
Andrew Tridgell 641ad6bc63 Plane: increase time allowed for update_alt() 
the altitude tracking code can be quite expensive with TECS
 2013-06-07 08:41:09 +10:00
Andrew Tridgell b0c87b8a61 Plane: fix VOLT_DIVIDER docs 2013-06-07 08:40:28 +10:00
Andrew Tridgell b27ffdd087 Plane: new plane beta 2.74beta2 2013-06-04 15:10:11 +10:00
Andrew Tridgell c008fa764c Plane: update_commands() can take 7ms if it needs to write a waypoint 2013-06-04 13:42:25 +10:00
Andrew Tridgell 93cd0f9a31 Plane: switch to new AP_Scheduler 
this gives us more accurate task scheduling in ArduPlane, plus better
monitoring of task timing (via SCHED_DEBUG)
 2013-06-04 13:34:58 +10:00
Andrew Tridgell 6bac13f9e2 Plane: fixed RCMAP_* to fix channel ranges for no-reboot changes 2013-06-03 21:20:39 +10:00
Andrew Tridgell 02d72ffcba Plane: make it possible to change board orientation at runtime 2013-06-03 16:52:44 +10:00
Andrew Tridgell 4c9bc30f58 Plane: make it possible to change control channel ordering without reboot 
this makes configuration a bit easier
 2013-06-03 16:42:38 +10:00
Andrew Tridgell 27bc0cdc2c Plane: rename old channel_* globals 
prevent the old "g." names from being used
 2013-06-03 16:37:51 +10:00
Andrew Tridgell a1f64d606a Plane: fixed remaining places where primary channel ordering was assumed 
should now use rcmap for all inputs
 2013-06-03 16:23:48 +10:00
Andrew Tridgell fb9bf21522 Plane: allow channel mapping of first 4 channels 
this makes it easier to support DSM and SBUS radios
 2013-06-03 16:23:48 +10:00
Andrew Tridgell 515d726ee0 Plane: use RC_Channel::rc_channel() instead of rc_ch[] 2013-06-03 16:23:48 +10:00
Andrew Tridgell f7697574db Plane: use the new airspeed driver interface 
the choice of analog source is now in the airspeed driver
 2013-06-03 11:51:09 +10:00
Andrew Tridgell d9bcfd913a Plane: reset attitude integrators on mode change 2013-06-01 22:29:38 +10:00
Andrew Tridgell bb3171ab5f Plane: zero attitude integrators on the ground 2013-06-01 22:29:38 +10:00
Andrew Tridgell cd55ed45e2 Plane: removed the old roll/pitch/yaw PID controllers 
use the new controllers, with auto parameter conversion
 2013-05-31 14:06:56 +10:00
Andrew Tridgell 91a04ab654 Plane: fixed headers for mode logging 2013-05-31 14:04:03 +10:00
Andrew Tridgell cae1079747 Plane: auto-convert the old RLL2SRV* parameters to the new CTL_RLL_* parameters 2013-05-31 07:58:29 +10:00
Andrew Tridgell e48b8c7b4a Plane: improve RTL altitude docs 2013-05-31 07:58:29 +10:00
Andrew Tridgell 6e0f1f56de Plane: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Andrew Tridgell fa9eb84542 Plane: added more parameter docs (flaps and GCS control) 2013-05-30 09:44:09 +10:00
Andrew Tridgell de904468b2 Plane: added BATT_MONITOR and VOLT_DIVIDER docs 2013-05-30 09:06:36 +10:00
Andrew Tridgell eba7d6da9a Plane: removed the old crash_timer code 
This code is less relevent with the new L1 navigation, and could cause
issues with the pilot not having control after a long dive.

Thanks to Soren for pointing out the issues

See issue #305
 2013-05-28 11:19:28 +10:00
Andrew Tridgell f9a1b4f0e3 Plane: improve ALT_MIX docs 2013-05-28 10:10:22 +10:00
Andrew Tridgell 767d9d0eb5 Plane: fixed stick mixing in AUTO modes 
the mixing was asymmetric. Many thanks to Soren Kuula for noticing this!
 2013-05-27 08:24:35 +10:00
Andrew Tridgell c481ac8745 Plane: use a default mixing gain of 0.5 
this ensures compatibility with existing configs
 2013-05-25 19:15:47 +10:00
Andrew Tridgell c81421e275 Plane: added MIXING_GAIN parameter 
this allows for the full range of output on both channels, but can
saturate
 2013-05-25 18:28:13 +10:00
Andrew Tridgell a22f5e3bc4 Plane: enable wind estimation 2013-05-24 11:21:42 +10:00
Andrew Tridgell dd633fcf3f Plane: make voltage and battery capacity failsafe settable at runtime 
this also fixes issue #292
 2013-05-22 20:33:57 +10:00
Randy Mackay 4c08e32bf6 Plane: param update for AP_Baro 2013-05-21 14:22:23 +09:00
Randy Mackay 84909ee56a Plane: add parameter description for LOG_BITMASK 2013-05-21 11:22:11 +09:00
Randy Mackay c7961a72fc Plane: send_text_P bug fix for short messages 2013-05-20 12:51:16 +09:00
Andrew Tridgell bd4b7d136f Plane: mark ArduPlane 2.74beta 2013-05-13 17:32:33 +10:00
Andrew Tridgell 001d18b51d Plane: removed scaling of pitot source 2013-05-13 15:19:05 +10:00
Andrew Tridgell 97b6aaac77 Plane: use voltage_average() for RSSI 
this fixes it on PX4
 2013-05-13 15:19:05 +10:00
Andrew Tridgell b940c4b28e Plane: use library gcs_severity 2013-05-09 09:28:57 +10:00
Andrew Tridgell 635b3fabda Plane: fixed APM1-1280 build 2013-05-08 21:44:45 +10:00
Andrew Tridgell 81c1fd5fc4 Plane: support 3D accel calibration over MAVLink 2013-05-08 16:25:35 +10:00
Andrew Tridgell c5f1570f32 Plane: fixed flash logging of ATT 
fixed types to be int16
 2013-05-08 14:21:32 +10:00
priseborough 854c50501d Plane: Added a constraint to demanded bank angle during FBW-A mode to prevent roll limits being exceeded 2013-05-07 11:01:05 +10:00
Andrew Tridgell fdd509a7c1 Plane: move baro init earlier in startup 
this ensures it is initialised when CLI takeover by MP happens

Thanks to Prof Avi Levi for reporting this bug
 2013-05-06 10:57:57 +10:00
Andrew Tridgell 0cf49308af Plane: mark a 2.73beta release 2013-05-05 22:36:22 +10:00
Andrew Tridgell 0e6a64fc14 Plane: reset roll/pitch integrators for APM_Control in takeoff 
when airspeed is below airspeed minimum. This is consistent with the
previous controllers

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-05-05 22:03:13 +10:00
Andrew Tridgell 9c6f80c42b Plane: moved some default values to Parameters.pde 2013-05-05 21:51:09 +10:00
Andrew Tridgell 6251d0510a Plane: obey pitch trim and throttle pitch feed forward in new controllers 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-05-05 21:51:09 +10:00
Andrew Tridgell e87a6d5564 Plane: added links to new APM controller docs 2013-05-05 21:51:09 +10:00
Andrew Tridgell 11ad9d5a2d Plane: auto-invert pitch control when upside down 
this helps to recover when flying inverted, for example when in manual
and hitting the lower altitude geofence
 2013-05-05 21:51:09 +10:00
Andrew Tridgell 4e2b88f6e6 Plane: added ATT_CONTROLLER option to select attitude controller 
set to 1 for the new APM_Control library
 2013-05-05 21:51:09 +10:00
Andrew Tridgell 55f7d18979 Plane: avoid copying the DCM matrix 2013-05-05 21:51:09 +10:00
priseborough 3663426550 Plane: Fixed bug in groundspeed_undershoot that could cause a fly-away in windy conditions. 
Use the component of velocity in the forward direction rather than the magnitude
 2013-05-05 21:51:08 +10:00
Paul Riseborough 663951d9a7 Plane: rename APM_Control parameters 
this groups the parameters more logically
 2013-05-05 21:51:08 +10:00
Paul Riseborough 8c5b603848 Plane: use new APM_Control API 2013-05-05 21:51:08 +10:00
Andrew Tridgell b43712e4d2 Plane: fixed APM1-1280 build 2013-05-03 12:40:43 +10:00
Andrew Tridgell 9f0a4dd553 Plane: log GCS text messages to flash log 
useful for seeing more complex actions
 2013-05-03 11:16:50 +10:00
Andrew Tridgell bb8f9d5443 Plane: simplify setHIL for baro 2013-05-02 15:27:02 +10:00
Andrew Tridgell 3cd52a9689 Plane: fixes for AP_Baro_HIL 2013-05-02 15:09:27 +10:00
Andrew Tridgell 0d97f417ec Plane: enable compass on all boards by default 
if not present, then mag init will fail and it will disable
 2013-05-02 15:01:33 +10:00
Andrew Tridgell 0aa38a5bd4 Plane: use new HIL compass API 2013-05-02 15:00:59 +10:00
Andrew Tridgell 5ba171af9a Plane: fixed mavlink levelling 
this was broken by a recent commit (after 2.72 was released)
 2013-05-02 13:38:28 +10:00
Andrew Tridgell a019e3740e Plane: updates for new compass API 2013-05-02 12:48:14 +10:00
Andrew Tridgell 9584aa89d9 Plane: replaced constrain() with constrain_float() 2013-05-02 10:27:10 +10:00
Randy Mackay b0f5b9a4cf Plane: use renamed RCInput valid_channels 2013-04-29 15:06:38 +09:00
Andrew Tridgell de3fcbc413 Plane: removed the MANUAL_LEVEL option 
levelling on every startup is far too error prone. This was just
another parameter that everyone changed.
 2013-04-29 14:19:53 +10:00
Andrew Tridgell 3d7a4d0e6e Plane: added ELEVON_OUTPUT option 
this is like the vtail mixer, but for elevons
 2013-04-29 12:13:59 +10:00
Andrew Tridgell 855277fa85 Plane: get ready for 2.72 release 2013-04-28 15:56:30 +10:00
Andrew Tridgell bdf0a2da69 Plane: log mode number as well as mode string 
this makes graphing mode changes easier
 2013-04-28 14:58:13 +10:00
Andrew Tridgell b53e3bb1fc Plane: log GPS messages as they come in 
stops us logging duplicate messages
 2013-04-28 14:56:31 +10:00
Andrew Tridgell 1956d9c2dc Plane: show modes as strings in log 2013-04-28 14:47:59 +10:00
Randy Mackay f47a2e951a Plane: add I2C error count to PM message 2013-04-26 22:39:56 +09:00
Andrew Tridgell 0b8c2da4df Plane: support 12 output channels on PX4 2013-04-25 20:10:53 +10:00
Andrew Tridgell 4f225eff57 Plane: if airspeed enabled, require 5m/s to unsuppress throttle 2013-04-25 20:10:53 +10:00
Andrew Tridgell ac7561c5d5 Plane: mark 2.72beta version 2013-04-24 16:19:18 +10:00
Andrew Tridgell 8ec1eaa8b1 build: removed obsolete cmake rules 
these have not been maintained for over a year
 2013-04-23 11:07:53 +10:00
Andrew Tridgell e446f375a7 Plane: set loiter.direction for GUIDED mode 2013-04-21 23:46:35 +10:00
Bill Bonney 3ec891265f Plane: Enable CURRENT logging by default onto Dataflash 2013-04-21 07:24:02 +10:00
Andrew Tridgell 02ed37e750 Plane: fixed APM1-1280 build 2013-04-20 18:21:19 +10:00
Andrew Tridgell 2e5834cc7f Plane: print flight mode as string in logs 2013-04-20 15:18:10 +10:00
Andrew Tridgell 3b90c6c386 Plane: log parameter changes 2013-04-20 13:52:36 +10:00
Andrew Tridgell 991d6598ef Plane: log board voltage 2013-04-20 13:52:36 +10:00
Andrew Tridgell 5c553852ed Plane: when logging is disabled don't include DataFlash at all 2013-04-20 13:52:36 +10:00
Andrew Tridgell 0c5b393919 Plane: added compass logging 2013-04-20 13:52:36 +10:00
Andrew Tridgell c56f338fe0 Plane: convert to new logging system 2013-04-20 13:52:36 +10:00
Andrew Tridgell c8af70a18d Plane: make the plane code compatible with the new logging system 
not actually converted yet
 2013-04-20 13:52:36 +10:00
Andrew Tridgell a329e32ccb Plane: added gps status to flashlog 2013-04-19 10:24:20 +10:00
Andrew Tridgell abe4dba871 Plane: added PX4 flash logging 2013-04-17 21:35:27 +10:00
Andrew Tridgell a12323c9fd Plane: fixed logging for new API 2013-04-17 21:34:56 +10:00
Andrew Tridgell 42344455c9 Plane: fixed structure init for arduino compiler 2013-04-15 21:59:07 +10:00
Andrew Tridgell 9f0f482dd7 Plane: fixed LOITER_TIME to start when loiter starts 
thanks to Paul Riseborough for finding this bug!
 2013-04-15 21:39:14 +10:00
Andrew Tridgell 75f4a43e2d Plane: fixed LOITER_TURNS command 
and cleanup more loiter variables
 2013-04-15 21:31:11 +10:00
Andrew Tridgell 82cd391cf8 Plane: use RADIUS_OF_EARTH define 2013-04-15 14:55:58 +10:00
Andrew Tridgell 8f091e70c8 Plane: move elevon variables into a structure 2013-04-15 14:53:56 +10:00
Andrew Tridgell 79c6f32400 Plane: made variables static and remove initial rc overrides 
minor code size savings
 2013-04-15 14:46:01 +10:00
Andrew Tridgell e918293e86 Plane: explain verify_*() commands 2013-04-15 14:41:15 +10:00
Andrew Tridgell 19b92b5bd8 Plane: removed "circle waypoint" completion test 
this is redundent with the location_passed_point() test
 2013-04-15 14:39:18 +10:00
Andrew Tridgell 994d8e354a Plane: allow for negative WP_LOITER_RAD for conter-clockwise loiter 
this follows the same convention as missions
 2013-04-15 10:52:32 +10:00
Andrew Tridgell 78538d0543 Plane: removed old HDNG2RLL PID control 
not used with L1
 2013-04-15 10:52:32 +10:00
Andrew Tridgell b2ad43f625 Plane: removed ahrs.set_barometer() 2013-04-15 10:52:32 +10:00
Andrew Tridgell 8d2cf6f3e5 Plane: update author list 2013-04-12 22:01:41 +10:00
priseborough 70a186464b Plane: added LEVEL_ROLL_LIMIT parameter 
this replaces both TKOFF_HEAD_HOLD and RUDDER_STEER, allowing users to
instead select a roll limit for takeoff and landing
 2013-04-12 21:59:52 +10:00
Andrew Tridgell 575f346e85 Plane: removed HIL_MODE_ATTITUDE 
we really need full sensors for HIL with the L1 controller. The flight
is also _much_ better with sensors HIL.
 2013-04-12 17:44:40 +10:00
Andrew Tridgell 11eb0cfce1 Plane: update for new AP_Navigation controller class 
this switches ArduPlane over to use the L1 navigation controller, via
a generic nav_controller object pointer.

Note that the nav_controller controls all types of navigation now,
including level flight and heading hold. This provides a cleaner
abstraction than the old method of special case navigation handling

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-04-12 12:48:09 +10:00
Andrew Tridgell c47bc09a3c Plane: avoid doing radio trim if less than 20% of travel available 
this prevents problems with awful trim on bootup due to RC TX being
off
 2013-04-12 12:47:59 +10:00
tobias 217b8d7a59 cleanup: use const for struct Location pointers and references 
this allows the compiler to generate more efficient code
 2013-04-09 12:10:32 +10:00
Andrew Tridgell 71f6287388 Plane: fixed spelling 2013-04-06 17:42:20 +11:00
Andrew Tridgell dcbe144c7e Plane: prepare for release of 2.71 2013-04-06 17:27:21 +11:00
Andrew Tridgell e58f49aeaf Plane: copy rudder out in TRAINING mode 
we were doing rudder mixing in training mode, which shouldn't be done
 2013-04-05 19:38:43 +11:00
Andrew Tridgell 993154ea59 Plane: expand the VTAIL_OUTPUT docs for APM1 2013-04-05 16:38:46 +11:00
Andrew Tridgell bd2b9fbe9d Plane: simplify the VTail mixer to be more like a hardware mixer 
this should make it easier to trim the vtail
 2013-04-05 15:47:51 +11:00
Andrew Tridgell 17cbcd1bf6 Plane: fixed failsafe with VTAIL_OUTPUT 2013-04-05 15:35:26 +11:00
Andrew Tridgell 406921faf1 Plane: added VTAIL_OUTPUT option 
this allows for software vtail mixing
 2013-04-05 15:22:11 +11:00