Jason Short
79a9665c9d
Added "slow WP" option for RTL.
2012-02-19 13:11:59 -08:00
Jason Short
ba2cfee2fb
Updated manual throttle control during throttle hold
2012-02-19 12:40:51 -08:00
Jason Short
a4b8119c24
added workaround for resetting alt.
2012-02-19 12:40:08 -08:00
Jason Short
2a5a7fa245
Added SW test for Manual Boost
2012-02-19 12:39:40 -08:00
Randy Mackay
b4ee111c49
TradHeli - change throttle range back to 0~1000 (was temporarily changed to be 1250~850 which limited the range of the swash plate's vertical movements)
2012-02-20 00:27:12 +09:00
Randy Mackay
7c4ef140b9
ArduCopter - remove unnecessary block for next GPS value before saving home location
2012-02-19 15:38:40 +09:00
Andrew Tridgell
1fc24b506e
AP_Param: update users of AP_Param for ParamToken
2012-02-19 17:05:28 +11:00
Andrew Tridgell
b06f35eaa2
Heli: fixed some 'used before initialised' warnings
2012-02-19 16:34:43 +11:00
Jason Short
f86e1ed63f
Axis lock beta (off by default)
2012-02-18 21:16:19 -08:00
Jason Short
aeed144180
updated max throttle define
2012-02-18 21:14:13 -08:00
Jason Short
5d658e5743
Change 800 to a define
2012-02-18 21:13:28 -08:00
Jason Short
83ad721b73
added Axis_Lock params
2012-02-18 21:13:06 -08:00
Jason Short
0517ed5199
updated throttle range
2012-02-18 21:11:06 -08:00
Jason Short
669e8e34ea
added a limit to range output
2012-02-18 21:08:17 -08:00
Jason Short
aa57fce9f4
some better defaults for JDrones
2012-02-18 14:23:21 -08:00
Randy Mackay
e3c24fbce8
ArduCopter - fix for yaw control on Octa Quad Plus frame.
2012-02-18 22:04:09 +09:00
Randy Mackay
b55db247ca
TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde.
...
also renamed heli parameters from _coll_ to the more descriptive _collective_
2012-02-18 20:57:51 +09:00
Randy Mackay
cd89258294
ArduCopter - updated version to 2.4
2012-02-18 18:44:29 +09:00
Andrew Tridgell
db4fef174b
ACM: expanded EEPROM parameter area by 256 bytes
2012-02-18 10:51:57 +11:00
Andrew Tridgell
6b357fc66b
AP_Param: fixed saving of sensor calibration
...
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
2012-02-18 10:51:57 +11:00
Jason Short
677df0fe1c
added Rate_D tuning value
2012-02-17 15:23:59 -08:00
Jason Short
0d5f7ca072
upped rate loop to 250hz
2012-02-17 15:23:59 -08:00
Jason Short
03aa28224b
re-implemented WII Dampening filter for Marco.
2012-02-16 22:38:23 -08:00
Jason Short
9c7b8586d5
Adjusted gains to move closer to Marco's tests
2012-02-16 22:19:39 -08:00
Jason Short
75919436ac
added extra gain logging
2012-02-16 22:09:22 -08:00
Jason Short
cbe297b634
scaled X velocity
2012-02-16 22:09:22 -08:00
Jason Short
6732f0934a
cast to float
2012-02-16 22:09:21 -08:00
Jason Short
6913400221
cast D term to float just in case
2012-02-16 22:09:21 -08:00
Jason Short
43e695b1ac
removed some unused vars,
...
formatting, made loop speed same as PIDT1 to eliminate variable.
2012-02-16 22:09:21 -08:00
Jason Short
b070225366
CH 6 Range setup
2012-02-15 11:47:54 -08:00
Jason Short
bb4c02fbff
Added acro_p to the params
2012-02-15 11:29:25 -08:00
Jason Short
f2b6b86265
allow auto-land if failsafe is triggered
2012-02-15 10:53:54 -08:00
Jason Short
efb451e475
Marco's updated Motor testing code
2012-02-15 10:49:35 -08:00
Jason Short
f9296796fd
Added lengthy note about motor testing
2012-02-15 10:49:11 -08:00
Jason Short
0b011e3cd3
added option in code for Loiter specific gains
2012-02-15 09:10:15 -08:00
Jason Short
101979ed7b
AP slew rate
2012-02-15 09:10:15 -08:00
Jason Short
f20952df49
new defaults for params
2012-02-15 09:10:15 -08:00
Jason Short
11d1973abd
Added Acro_P
2012-02-15 09:10:14 -08:00
Jason Short
67892cd8df
synced params
2012-02-15 09:10:14 -08:00
Jason Short
c916a87a78
added RTL_land_enabled
...
added auto_pilot slew rate
2012-02-15 09:10:14 -08:00
Jason Short
eee43608de
Added new params for CH6 Tuning
...
moved enums to give more room for additional PIDs for Loiter
added new Acro_P gain
added auto_land_enabled option
added pi_loiter_lon and pi_loiter_lat for separate tuning of loiter
2012-02-15 09:10:14 -08:00
Jason Short
4ecbb19dcd
Added range setting via a parameter for CH6 tuning
2012-02-15 09:10:14 -08:00
Jason Short
ff627a8986
removed unused Vars
2012-02-13 15:25:23 -08:00
Jason Short
a69dc32020
Lowered for Jani
2012-02-13 15:25:23 -08:00
Andrew Tridgell
153575a01c
token is 16 bits now
2012-02-13 16:22:53 +11:00
Andrew Tridgell
16a5b5c3ee
added AP_Param::show_all()
...
this moves the logic into common code
2012-02-13 16:22:52 +11:00
Andrew Tridgell
781617cae0
token size for first()/next() is now 16 bits
2012-02-13 16:22:52 +11:00
Andrew Tridgell
50f9d12ad5
go back to 1024 bytes for variables in EEPROM
2012-02-13 16:22:52 +11:00
Andrew Tridgell
f5f6e2d4ec
added group indexes to GCS_MAVLINK class
2012-02-13 16:22:52 +11:00
Andrew Tridgell
d2a4091716
fixed apm2beta build with AP_Param
2012-02-13 16:22:52 +11:00
Andrew Tridgell
1bf832de2d
the ACM parameters have a max size of 1114 bytes
...
to ensure that all parameters can be saved, expand parameter area by
256 bytes
2012-02-13 16:22:52 +11:00
Andrew Tridgell
1af6f08b1c
adapted main ACM code for AP_Param
2012-02-13 16:22:52 +11:00
Andrew Tridgell
da1526ced2
update ACM MAVLink code for AP_Param
2012-02-13 16:22:52 +11:00
Andrew Tridgell
f363d0542c
fixed warning in Log build
2012-02-13 16:22:52 +11:00
Andrew Tridgell
55d0ad3255
update main parameter code for AP_Param in ACM
2012-02-13 16:22:52 +11:00
Andrew Tridgell
2133b9fb08
log: fixed some integer size errors
...
need to be careful with the types passed to printf()
2012-02-12 20:38:37 +11:00
Pat Hickey
abd85f99a7
Makefile: extra convenience target for apm2hexa
2012-02-11 16:05:51 -08:00
Pat Hickey
0ad15e4fff
ArduCopter Hexa output_motor_test: individually select all 6 motors
...
* each of the 6 hexacopter motors can be selected individually
by moving the joystick to extremes.
* previously, this was built from the quadcopter output_motor_test
and some motors (left/right motors on +, front/back motors on X)
were only selectable as pairs.
2012-02-11 16:05:51 -08:00
Pat Hickey
81ce8d346e
ArduCopter setup motors: print basic instructions.
2012-02-11 16:05:51 -08:00
Pat Hickey
2022c1bab0
ArduCopter APM_Config.h: add sample custom channel config
...
* uses new config variables introduced in 8a19543fd1e09621ba
2012-02-11 16:05:51 -08:00
Pat Hickey
db4195b7a0
ArduCopter Channel Config: config vars for user override of MOT_n mapping
...
* config variable CONFIG_CHANNELS has possible values
CHANNEL_CONFIG_DEFAULT or CHANNEL_CONFIG_CUSTOM
* config_channels.h only provides APM1/APM2 mapping when
CONFIG_CHANNELS == CHANNEL_CONFIG_DEFAULT
2012-02-11 16:05:51 -08:00
Jason Short
0315221bd1
Cosmetic tweaks for tuning
2012-02-11 15:29:11 -08:00
Jason Short
f369a02aab
Gain adjustments for 3d frame.
2012-02-11 15:29:11 -08:00
Jason Short
c39cafc3c5
reset All for Auto takeoff
2012-02-10 22:54:29 -08:00
Jason Short
7c45d2bdc3
reset Rate_I for takeoff
2012-02-10 22:50:56 -08:00
Jason Short
8cc480f7e6
upped max target speed to center of loiter
2012-02-10 22:46:27 -08:00
Jason Short
1851dd541b
Made Yaw Hold universal for Acro
2012-02-10 22:32:55 -08:00
Jason Short
32e7b075d9
Moved to Rate_I by default for Jani to test
2012-02-10 22:32:55 -08:00
Jason Short
4f44ccc182
get_acro_yaw added
2012-02-10 22:32:55 -08:00
Jason Short
927fc25421
made Yaw work like Roll and Pitch
2012-02-10 22:32:55 -08:00
Jason Short
480be14eb0
Minimize the Yaw Deadzone
2012-02-10 22:32:55 -08:00
Jason Short
b29384581a
Up Nav_Rate_P
2012-02-09 22:38:36 -08:00
Jason Short
7cb4711e8e
reverted to Save_WP now that CH7 triggering is fixed
2012-02-09 22:33:01 -08:00
Jason Short
8a1c2165b2
Fix for disabled CH7 value triggering WP saving
2012-02-09 22:32:04 -08:00
Jason Short
a27bd9db46
2.3.1v
2012-02-09 22:22:01 -08:00
Jason Short
fb003e9742
Enabled PWM test
2012-02-09 22:22:01 -08:00
Jason Short
e5a0959394
Found missing Break in Switch statement.
2012-02-09 22:22:01 -08:00
Jason Short
471bd12799
faster FS timer
2012-02-09 22:22:00 -08:00
Jason Short
0f3c3bb563
Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune.
2012-02-09 22:22:00 -08:00
Jason Short
d00d6b8c64
Added safety to prevent shutdown of motors during Auto-land
2012-02-09 22:22:00 -08:00
Jason Short
f3547a04a5
Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that.
2012-02-09 22:22:00 -08:00
Randy Mackay
7745239c13
ArduCopter - CH7 - changed default to CH7_DO_NOTHING
2012-02-09 20:26:01 +09:00
levinemax
0d3369af45
Motor mix update for X8 (octo quad),
...
diagrams:
http://wiki.ardupilot-mega.googlecode.com/git/images/APM1/ACM-X8_APM14.jpg
http://wiki.ardupilot-mega.googlecode.com/git/images/APM2/FRAMES_X8.jpg
2012-02-09 03:57:40 +00:00
Randy Mackay
31ff9a9318
ArduCopter - Camera.pde - turn off camera pitch control (which uses channel 6) when channel 6 is being used for tuning.
2012-02-08 23:51:53 +09:00
Randy Mackay
e9ef79c42d
Arducopter - reduced rate of decent when landing using sonar
2012-02-08 22:46:32 +09:00
Randy Mackay
54fe857236
ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments
2012-02-05 16:56:51 +09:00
Randy Mackay
bde1ebb56e
TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction.
2012-02-05 11:04:38 +09:00
Andrew Tridgell
c95a295fd6
allow for lower serial baud rates
...
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
2012-02-04 19:07:18 +11:00
Jason Short
d161c0451f
fix issue with low throttle in air
2012-02-03 13:29:59 +00:00
Michael Oborne
484b688700
fix issue 502
...
to identify quad over mavlink
2012-02-03 06:53:08 +08:00
Pat Hickey
b65eb110bd
Revert all changes to ArduCopter Motors MOT mappings.
...
Revert "Arducopter Motors Octa: Change V frame MOT_ output ordering."
This reverts commit bdab02f408ddc5451fcb4c6390b2475d31ac657f.
Revert "hexa frame FRAME_CONFIG fixup"
This reverts commit d15e692df613cb728ec671a54dce166f6f1940a0.
Revert "Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME"
This reverts commit cb0a8c62fbd07a8ae9dcb8d4fffce337ace1aa1c.
Revert "Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame"
This reverts commit 120d7f9050d5ec9f8fbe02c0ed4f38621949f4ee.
Revert "Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME"
This reverts commit 7d65ec311fd2e1222a36d0b34c366e21f3869fcc.
Revert "Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines."
This reverts commit 47c6e8662f4d5e8fb920f2049338541343d8d18e.
Revert "Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types."
This reverts commit 8259c90ec7cb29dedac19890cd9a4449b7399e36.
2012-02-01 10:14:46 -08:00
analoguedevices
256893f385
credits
2012-02-01 04:44:36 +00:00
analoguedevices
d86dbd1c6f
Incremented version number to 2.3
2012-02-01 04:39:15 +00:00
Pat Hickey
48b152d642
ArduCopter Octa: fix yaw motors for Octa V.
...
* I based this off the APM1 Octa V diagram at
http://code.google.com/p/arducopter/wiki/AC2_Multi
2012-01-31 19:37:49 -08:00
Pat Hickey
ca18eb3f8f
Arducopter Motors Octa: Change V frame MOT_ output ordering.
...
* I backed this out from Max's changes, but I'm not sure whether its correct.
2012-01-31 18:19:41 -08:00
Pat Hickey
417d75eb50
hexa frame FRAME_CONFIG fixup
2012-01-31 18:19:41 -08:00
Pat Hickey
41ea9079be
Arducopter Motors Octa: revert OCTA_V_FRAME back to part of OCTA_FRAME
2012-01-31 18:19:41 -08:00
Pat Hickey
7d264d1150
Arducopter Motors Hexa: Change ordering of MOT designations in Plus frame
...
* This will change the output order for APM2, but not APM1.
2012-01-31 18:18:13 -08:00
Pat Hickey
5cee2b674b
Arducopter Motors Hexa: Revert HEXA_PLUS_ and HEXA_X_ to single HEXA_FRAME
2012-01-31 18:18:13 -08:00
Pat Hickey
8463acc978
Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines.
...
* HEXA_X_FRAME and HEXA_PLUS_FRAME merged back into HEXA_FRAME
* OCTA_V_FRAME merged back into OCTA_FRAME
2012-01-31 18:18:13 -08:00
Pat Hickey
f32d089f33
Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types.
...
* HEXA_FRAME has been eliminated and changed to HEXA_X_FRAME and
HEXA_PLUS_FRAME
* OCTA_FRAME stays the same name for X and +, but the V frame
configuration requires new OCTA_V_FRAME name.
2012-01-31 18:18:13 -08:00
Randy Mackay
1a1f6cac5d
OptFlow - reenable OF_LOITER pid controller and reduce I term
2012-02-01 08:04:18 +09:00
Jason Short
4402a92e85
Loiter PIDs
2012-01-30 21:13:03 -08:00
Jason Short
5de459a160
tweaks to Loiter
2012-01-30 21:13:03 -08:00
Jason Short
06d54bf0e8
ATT tuning update
2012-01-30 21:13:03 -08:00
Jason Short
c181186690
tuning
2012-01-30 21:13:03 -08:00
Jason Short
90ee552bd1
cosmetic
2012-01-30 21:13:03 -08:00
Jason Short
3050c1d765
tuning fixes
2012-01-30 21:13:03 -08:00
Jason Short
f2afa39bbd
Cosmetic
2012-01-30 21:13:03 -08:00
Jani Hirvinen
b3dd07038b
Minor changes for PID for jDrones motors due latest changes on control laws.
2012-01-31 09:00:31 +07:00
Jason Short
ba81e2aa69
pid_nav_lat incorrectly labeled
2012-01-29 23:02:00 -08:00
Jason Short
cc45bd47fe
cosmetic
2012-01-29 21:55:17 -08:00
Jason Short
d93e259289
Added more attributions
2012-01-29 21:53:44 -08:00
Jason Short
25c2c9b437
removed filter. Don't need it.
2012-01-29 17:10:52 -08:00
Jason Short
c855c81d2a
limiting alt hold rate error to 1m/s
2012-01-29 17:08:34 -08:00
Jason Short
370d633f51
Lowering the throttle_P values by default
2012-01-29 16:27:13 -08:00
Jason Short
af0b0d5a7f
made Loiter over ride exit dependent not on speed, but centered sticks.
2012-01-29 16:15:02 -08:00
Randy Mackay
cff6799d18
TradHeli - fix to servo limits. They had been unnecessarily limited to the collective pitch's min and max but actually there are cases (for example when the swash is leaning over 45degrees) where one servo goes well beyond the collective pitch's min or max.
2012-01-29 21:14:37 +09:00
Randy Mackay
1cbbe7bc7d
Optflow - minor fix to D term defaulting
2012-01-29 21:06:41 +09:00
Jason Short
2a8044c666
Landing update for better baro landing
2012-01-28 22:35:57 -08:00
Jason Short
9dd1730cce
reduce test.pde size for 1280 users
2012-01-28 22:16:24 -08:00
Jason Short
0213f4dd88
2.2B6 - Please verify Heli still functions properly.
...
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Jason Short
e94ac68e4d
formatting
2012-01-28 21:19:46 -08:00
Jason Short
8fcb2931d7
Cosmetic changes
...
GPS LED lock waits for home_is_set to be true
2012-01-28 21:19:46 -08:00
Jason Short
a685510c38
changed tuning range
2012-01-28 21:18:43 -08:00
Randy Mackay
000acac9f8
Arducopter - Tri - move yaw servo (channel7/motor7/CH_TRI_YAW) to mid point on startup
2012-01-28 10:13:58 +09:00
Randy Mackay
2db4d2bfe6
OpticalFlow - added OF_LOITER flightmode
2012-01-28 09:27:16 +09:00
Pat Hickey
38d83d6cf0
ArduCopter Tri: fix for enable_out of yaw servo, defined yaw servo for APM2
2012-01-27 07:39:01 -08:00
Randy Mackay
f27b41179b
Sonar - changed default pin to A0
2012-01-26 22:50:48 +09:00
Pat Hickey
70825e0e1c
ArduCopter Heli: add motors_output_enable function
2012-01-25 22:41:09 -08:00
Randy Mackay
2f84b54bbb
OpticalFlow - replaced PI controller with PID controller.
...
Modified optical flow hold to use aggregated position instead of speed.
2012-01-25 21:55:14 +09:00
Randy Mackay
cd21c5905b
Optical flow - updated standard frame rate to 2000hz and increased resolution to 1600cpi
2012-01-25 21:53:20 +09:00
Jason Short
86c7742dc0
added loiter_d to allow users to configure alternate Loiter alg
2012-01-22 14:19:27 -08:00
Jason Short
32241319c1
Revert "test to switch loiter controls"
...
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
2012-01-22 14:19:27 -08:00
Jason Short
04a2eee410
test to switch loiter controls
2012-01-22 12:28:34 -08:00
Pat Hickey
05246bf3b4
ArduCopter: Call APM_RC.enable_out for camera channels in init_camera()
2012-01-22 12:03:11 -08:00
Pat Hickey
368e736a61
ArduCopter: Call motors_output_enable at correct spot during init
2012-01-22 12:03:11 -08:00
Pat Hickey
2bd2e9c774
ArduCopter: Add implementation of motors_output_enable to each motors_ frame type
2012-01-22 12:03:11 -08:00
Jason Short
acf43341da
Causes Aero_SIM to fail
2012-01-22 09:34:43 -08:00
Jason Short
8c4b955282
added Beta 4 tag
2012-01-21 22:15:23 -08:00
Jason Short
a213e05eb9
converted to cm
...
Signed-off-by: Jason Short <jasonshort@mac.com>
2012-01-21 22:14:08 -08:00
Jason Short
7616c3b5a1
Converted distance gains to CM
...
added loiter_d for rate control, equal to old Nav_P gain
2012-01-21 22:13:57 -08:00
Jason Short
e1f7fa34ea
Fixed speed governor which was letting speed get to 0.
...
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
2012-01-21 22:12:57 -08:00
Jason Short
8bd6cabdf1
recording nav_bearing rather than target bearing
...
recording x and y speed rather than Iterms for nav since they are always 0 now
2012-01-21 22:10:28 -08:00
Jason Short
14a8d8a471
added conversions of CM to M
2012-01-21 22:09:39 -08:00
Jason Short
a3daae1530
Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning.
...
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
2012-01-21 22:09:13 -08:00
Jason Short
9ecd091f79
convert command into CM from M
...
Making Landing boost be one at minimum to trigger better navthrottle output
2012-01-21 22:06:35 -08:00
Jason Short
6377cf8549
better default for speed governer
2012-01-21 22:05:48 -08:00
Jason Short
02d6adb21f
slightly less filtering for less latency
2012-01-21 22:04:54 -08:00
Jason Short
275815a7c9
Converted to cm for distance
2012-01-21 22:04:35 -08:00
Jason Short
ab8bf0b560
increasing the velocity near WP
2012-01-21 11:59:49 -08:00
Jason Short
8f86caa3ff
limiting the pitch throttle compensation
2012-01-21 11:59:49 -08:00
Jason Short
fa06d4a2e3
Calc error for logs
2012-01-21 11:59:49 -08:00
Jason Short
d444051eb3
Enabled auto throttle hold
2012-01-20 22:52:31 -08:00
Jason Short
e9a4253cd1
added note
2012-01-20 22:52:31 -08:00
Jason Short
3921fb7880
formatting
2012-01-20 22:52:31 -08:00
Jason Short
2fa8a343ac
Added cast for comparison
2012-01-20 22:52:30 -08:00
Jason Short
525f7cd40f
cleanup
2012-01-20 22:52:30 -08:00
Jason Short
a087d84734
error on comparison operator
2012-01-20 22:52:30 -08:00
Jason Short
84937b4f69
Added Auto_land_timeout to params
2012-01-20 22:52:30 -08:00
Jason Short
bf8774c2f8
AutoLanding timeout for Mission Planner
2012-01-20 22:52:30 -08:00
Jason Short
c5dd970026
Max throttle output was to high
2012-01-20 22:52:30 -08:00
Jason Short
99b71434da
Updated Firmware version
2012-01-20 22:52:30 -08:00
Jason Short
9c912b2573
reset all I terms at Arming
2012-01-20 22:52:30 -08:00
Jason Short
63a1cf75df
enabled Mavlink Land command
2012-01-20 22:52:30 -08:00
Jason Short
0475dbf8ae
relocated reset_I term functions to central location
2012-01-20 22:52:30 -08:00
Jason Short
f504c79fb0
Stab_D changes units with the new dampening controller updates
...
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
2012-01-20 22:52:30 -08:00
Jason Short
3a4a80c650
renamed function
2012-01-20 22:52:30 -08:00
Jason Short
c2496948fb
Verify land updates from JLN
...
Effectively a throttle control for landing that mimics a person lowering the throttle.
2012-01-20 22:52:29 -08:00
Jason Short
d991a22453
Refined the D term for stabilize
...
moved all the rest_I terms from code into 1 central place
2012-01-20 22:52:29 -08:00
Jason Short
ba535ed956
B3
2012-01-20 22:52:29 -08:00
Jason Short
556d646cad
set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units.
...
added the ability to force nav_throttle so we don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
2012-01-20 22:52:29 -08:00
Jason Short
0f24860552
Altitude no longer resets when moving loiter WP
2012-01-20 22:52:29 -08:00
Jason Short
7468889bb7
slowed down slightly
2012-01-20 22:52:29 -08:00
Jason Short
aa1f09af83
Lowered range to more sensible values
2012-01-20 22:52:29 -08:00
Jason Short
3797c25867
Off by default
2012-01-20 22:52:29 -08:00
Michael Oborne
c2f3cf0cf5
AC fix attitude level hil
2012-01-21 07:52:52 +08:00
Michael Oborne
b94c80059b
fix scale error
2012-01-21 06:33:18 +08:00
Michael Oborne
3b93418d67
AC sync battery code with arduplane
2012-01-21 06:29:09 +08:00
Michael Oborne
7f272b4c4b
fix SITL attitude hil AC
2012-01-20 16:32:25 +08:00
Doug Weibel
2ea9db84e0
Update battery monitoring code for ArduCopter
...
Fixes compatibility for APM2. Also a significant update to the battery monitoring code: We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos. These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere). Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs. The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Doug Weibel
17b3e514dc
Just a little more commenting work on global variables
2012-01-15 16:11:02 -07:00
Jason Short
f326a5a9ea
APM2 Channel assignments
2012-01-15 10:24:16 -08:00
Jason Short
7e411f5fb6
This allows users to test the Auto_throttle hold or cruise value
2012-01-14 11:43:52 -08:00
Jason Short
3879e79898
b2
2012-01-14 11:37:00 -08:00
Jason Short
cf51967bbb
Fix for SIMPLE mode
2012-01-14 11:32:48 -08:00
Jason Short
6714ab49ad
Tweak to make circle mode scripting more accurate
2012-01-14 11:21:50 -08:00
Jason Short
e7ad08e209
adjusted GPS watch dog not to be so aggressive,
...
removed unneeded flag clearing
2012-01-14 11:20:40 -08:00
Jason Short
11e1df497d
lowered Loiter I, commented out unused var
2012-01-14 11:20:40 -08:00
Jason Short
f25d741f62
temp removed alt D term until more testing
2012-01-14 11:20:40 -08:00
Jason Short
e6ec80bb21
Clarified the Increment for WP total
2012-01-14 11:20:40 -08:00
Jason Short
6d0329b08c
added notes, removed redundant save wp_total
2012-01-14 11:20:40 -08:00
Jason Short
24b760d48f
added update throttle cruise function
2012-01-13 16:48:05 -08:00
Jason Short
414a2581a0
Made RTL always the current Altitude
2012-01-13 16:47:38 -08:00
Jason Short
c970ba4f93
made resetting throttle cruise a function
2012-01-13 16:47:08 -08:00
Jason Short
589f8bc557
Disabled Ryans filter until we get real-world testing in.
2012-01-13 12:48:02 -08:00
Jason Short
05dce91c24
fixed GPS bug - moved to fast loop location
2012-01-13 12:47:22 -08:00
Jason Short
8de6e0e223
made landing shoot for below home by 2 meters to avoid bounce up.
2012-01-13 12:46:40 -08:00
Jason Short
9a0539f39e
tuned down Alt hold D gain
2012-01-13 09:36:51 -08:00
Jason Short
81413d2a76
re-enabled relay test
2012-01-13 08:55:02 -08:00