Commit Graph

4603 Commits

Author SHA1 Message Date
Tim Tuxworth
21ec47f184 Plane: Display Fence Breach message in GCS
Send a "Geofence breach" message to the Ground Control Station. Without this when the fence is breached and if anything happens as a result, such as RTL, it will happen silently.
2022-03-16 18:04:19 +11:00
Andrew Tridgell
a1856c5c22 Plane: added an arming check for Q_ASSIST_SPEED
Q_ASSIST should really be enabled for all non-tailsitter
quadplanes. This arming check will help users remember to configure it
2022-03-16 09:29:14 +11:00
Andrew Tridgell
82937ca778 Plane: check that RTL_AUTOLAND is set if using DO_LAND_START 2022-03-14 09:52:41 +11:00
Andrew Tridgell
0ca48fa9da Plane: added release notes for 4.2.0beta2 2022-03-10 13:44:05 +11:00
Andrew Tridgell
55c46cd868 Plane: protect against short stop_distance 2022-03-10 13:41:18 +11:00
Andrew Tridgell
5e14b9efe6 Plane: use pos control for most of LAND_FINAL
this gives more accurate landing with some velocity drift
2022-03-10 07:34:20 +11:00
Andrew Tridgell
cc9b9813cb Plane: review fixes
thanks Pete!
2022-03-10 07:34:20 +11:00
Andrew Tridgell
f09c715d7a Plane: wait till motors are fully up before takeoff in guided mode
this allows for guided mode takeoff in tilt-rotors. Otherwise motors
till be pointing forward and takeoff will go very badly
2022-03-10 07:34:20 +11:00
Andrew Tridgell
3659669409 Plane: cope with high angle error in airbrake state
if we are flying too far off the target vector then exit airbrake
state. This prevents flying for a long distance away from the landing
point in airbrake mode
2022-03-10 07:34:20 +11:00
Andrew Tridgell
f9ecf15973 Plane: setup target accel in POSITION1 state 2022-03-10 07:34:20 +11:00
Andrew Tridgell
2864e21b31 Plane: allow for a trans decel margin
so if we are behind the velocity curve we are less likely to overshoot
landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
33bc067edf Plane: fix NAV_CONTROLLER_OUTPUT in Q modes
Q modes don't always use wp_nav, but do use pos_control

AUTO and QRTL setup the plane navigation as well, so can use the L1
data
2022-03-10 07:34:20 +11:00
Andrew Tridgell
3fe9a55269 Plane: added APIs for lua ship landing 2022-03-10 07:34:20 +11:00
Andrew Tridgell
c54fb0f51b Plane: link in AP_Follow
ready for ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
72087335f7 Plane: removed terrain home correction 2022-03-10 07:34:20 +11:00
Iampete1
a7bc844780 Plane: never stick mix without valid RC input 2022-03-09 18:26:30 +11:00
Iampete1
c46a19bf89 ArduPlane: tailsitter: keep attitude controll throttle level upto date for smoother controller handover 2022-03-09 18:21:51 +11:00
Andrew Tridgell
8ccf84d9a3 Plane: disallow mavlink disarm while flying
this relies on is_flying(), and we will need to watch for reports of
the heuristics failing
2022-03-09 17:13:45 +11:00
RuffaloLavoisier
962d1d112b ArduPlane : Indentation correction 2022-03-08 14:24:46 -08:00
RuffaloVM
d8085f71af ArduPlane : case label indentation 2022-03-08 14:24:46 -08:00
Andrew Tridgell
6d63e1f7d3 Plane: added Q_LAND_ALTCHG parameter
this is the threshold height change over 4 seconds for a landing to be
detected. It can be raised if landing detection is very slow
2022-03-09 07:50:10 +11:00
Iampete1
54e57ccff0 Plane: don't prevent stick mixing in none RC failsafe 2022-03-08 11:21:13 +11:00
Peter Barker
302c8e4b98 ArduPlane: rename within_min_dz to in_min_dz for consistency
... consistency with in_trim_dz
2022-03-08 11:17:45 +11:00
Andrew Tridgell
08d53c2d64 Plane: change master version to 4.3.0dev 2022-03-02 07:44:36 +11:00
Andrew Tridgell
ad53ee7f0e Plane: added release notes for 4.2.0beta1 2022-03-02 07:43:59 +11:00
Peter Barker
c0aa20b1d0 ArduPlane: include cleanups 2022-03-01 11:21:33 +11:00
Henry Wurzburg
0c32e71272 ArduPlane: clarify and simplify RC failsafe messages 2022-03-01 11:05:15 +11:00
Peter Barker
452a5df0cc ArduPlane: add RebootRequred to stream rate parameters 2022-03-01 11:01:12 +11:00
Iampete1
80f8f8b14e Plane: quadplane: double log QPOS state change 2022-03-01 10:59:07 +11:00
Iampete1
c26ffed47f Plane: motor_test: use PWM min and max from RC_Channel 2022-03-01 10:47:25 +11:00
Peter Barker
b19bfba0ec Plane: use has_valid_input in place of checking throttle counter 2022-03-01 10:29:37 +11:00
Peter Barker
13fa1e30ad ArduPlane: rename and make enum RC_Channel::ControlType
Type:: is too generic; get_type should probably be get_control_type
2022-02-27 09:55:01 +11:00
Andrew Tridgell
b444420329 Plane: removed controller error in transmitter tuning 2022-02-22 12:23:48 +11:00
Andrew Tridgell
e3e125c307 Plane: prepare for 4.1.7 2022-02-21 12:11:28 +11:00
Iampete1
267583db55 Plane: quadplane: never reset yaw target rates when entering QPOS1 2022-02-21 09:35:06 +11:00
Iampete1
9fd14dbf94 Plane: quadplane: set IO failsafe limit for all motors 2022-02-17 12:31:16 +11:00
Iampete1
42a2e1094c Plane: set failsafe limit for throttle left and right 2022-02-17 12:31:16 +11:00
Andrew Tridgell
1bdc9b5bf8 Plane: fixed in_vtol logic so QRTL can AIRBRAKE 2022-02-16 07:43:01 +11:00
Andrew Tridgell
aab6c94936 Plane: don't weathervane in AIRBRAKE state
this prevents unwanted VTOL motor throttle while trying to slow
down. In this stage the slaving of yaw rate to fixed wing roll control
is sufficient
2022-02-16 07:43:01 +11:00
Andrew Tridgell
2846f87eeb Plane: reduce height gain in auto landing for tiltrotors
avoid running the motors while tilted past the tilt max if we are in
AIRBRAKE state. This stops a large amount of forward thrust from the
tilted motors while trying to slow down, while still maintaining
attitude control
2022-02-16 07:43:01 +11:00
Andrew Tridgell
5bb7b04343 Plane: added release notes for 4.1.7beta1 2022-02-12 09:00:51 +11:00
Peter Barker
458d43fc1e ArduPlane: send deprecated message warning for MAVLINK_MSG_ID_SET_HOME_POSITION 2022-02-10 12:13:43 +11:00
Iampete1
1ca1707f9f Plane: quadpalne: keep motors interlock state upto date with E-stop 2022-02-10 07:43:40 +09:00
Peter Barker
d914e4e63b Plane: convert next WP alt to global frame in POSITION_TARGET_GLOBAL_INT 2022-02-09 16:09:41 +11:00
Peter Barker
10be59da17 ArduPlane: create and use location_from_command_t 2022-02-09 09:15:11 +11:00
Peter Barker
e1314cc297 Plane: remove ancient convert_mixers 2022-02-08 12:19:55 +11:00
Peter Barker
4068d57930 Plane: correct spelling of mode_lotier_qland 2022-02-08 12:19:03 +11:00
Peter Barker
7c0b1f46d6 Plane: remove logging of STRT message
SType is always 3 - and we're just about to log the entire
mission so CTOT is pointless
2022-02-08 12:18:16 +11:00
Henry Wurzburg
e82ad1ec24 ArduPlane: fix error in Tricks on a Switch qualifier 2022-02-08 11:54:38 +11:00
Peter Barker
bab79d0094 ArduPlane: stop passing mission in Terrain constructor
Terrain can use the mission singleton

This means Copter can have terrain while compiling mission out
2022-02-08 11:20:20 +11:00
Peter Hall
717b18a680 Plane: quadplane: add allow_weathervane transtion class method 2022-02-08 10:38:16 +11:00
Peter Hall
6a719664d3 Plane: quadplane: pass takeoff and landing state to weathervane 2022-02-08 10:38:16 +11:00
Gone4Dirt
a79359dc67 Plane: use new weathervane library 2022-02-08 10:38:16 +11:00
Peter Barker
dd06a93c06 Plane: remove unused TRUE/FALSE defines 2022-02-07 21:20:21 +11:00
Peter Barker
9878701095 Plane: remove unused DEBUG define 2022-02-07 21:20:21 +11:00
Peter Barker
90310f4c6e Plane: remove unused 'ALT_CONTROL' enumeration 2022-02-07 21:20:21 +11:00
Henry Wurzburg
ea9d35c99d ArduPlane: extend nav_scripting to all modes 2022-02-07 21:19:28 +11:00
Hwurzburg
ad30d476c8 Plane: enforce acro rate limits in aerobatics scripting 2022-02-07 12:35:31 +11:00
Hwurzburg
0efb2f2048 Plane: disable TECS use during NAV_SCRIPT_TIME 2022-02-07 12:34:15 +11:00
murata
f8383df5a4 Plane: Remove meaningless semicolons 2022-02-07 08:27:34 +09:00
Bill Geyer
54bdde8845 Copter: fix parameter issue with quadplane 2022-02-01 23:06:51 -05:00
Bill Geyer
9bec232c8a Plane: modify qautotune to use of multi subclass 2022-02-01 23:06:51 -05:00
Peter Hall
9ec1faf3f9 Plane: tailsitter: rate limit second half of FW transtion 2022-01-26 19:03:32 +11:00
Peter Barker
d6c653bdc5 ArduPlane: move logging of SIMSTATE, AHRS2 and POS into AP_AHRS library 2022-01-25 10:59:17 +11:00
Peter Barker
266d384ca7 ArduPlane: rename AP_AHRS::get_position to get_location 2022-01-25 10:47:22 +11:00
Iampete1
f725f7bb7e Plane: set new slew limit and inherit slew limt for flaps 2022-01-25 10:12:13 +11:00
Joshua Henderson
c1abcfb7c4 Plane: move Airspeed to AP_Vehicle 2022-01-19 18:21:32 +11:00
Josh Henderson
6dc5a9fc54 Plane: GCS move airspeed sensor status flags up 2022-01-19 18:21:32 +11:00
Josh Henderson
9a3fed0263 Plane: move high_latency_air_temperature up 2022-01-19 18:21:32 +11:00
Andrew Tridgell
3273ead11b Plane: use EKF climb rate estimate in VFR_HUD.climb
EKF estimate is both more accurate and less noisy
2022-01-18 13:26:31 +11:00
Iampete1
32488a5e3a Plane: add MOTB logging at 10hz 2022-01-18 10:18:10 +11:00
Jaaaky
852546f8cf ArduPlane: fix man_expo pitch & rudder params/variables 2022-01-12 18:27:08 +11:00
Peter Barker
0cf4254290 ArduPlane: move RPM sensor logging into AP_RPM 2022-01-11 11:09:26 +11:00
Iampete1
3a5c7ea8fc Plane: quadplane: add transtion fail action param 2022-01-11 11:02:33 +11:00
Peter Hall
b64ddb9ac0 Plane: tailsitter: only set limit flags if outputs are configured 2022-01-11 10:37:38 +11:00
Peter Hall
2ffebebddc Plane: tailsitter: provide min throttle limit based on disk therory outflow velocity 2022-01-11 10:37:38 +11:00
Iampete1
0fa1ddf7c2 Plane: tailsitter: always give pitch prority elevon mixing in VTOL modes 2022-01-11 10:37:38 +11:00
Iampete1
d473344177 Plane: add video stab log bit and log in ahrs_update 2022-01-05 19:56:03 +11:00
Iampete1
ca1b5b1db2 Plane: Quadplane: use get_frame_and_type_string 2022-01-05 19:51:19 +11:00
Peter Barker
89e3e27d3d ArduPlane: move INS notch filter logging into INS 2022-01-05 16:34:36 +11:00
Peter Barker
173f36c145 ArduPlane: make vehicles write notch log messages 2022-01-05 16:34:36 +11:00
Peter Hall
d4eb2c6396 Plane: quadplane: QPOS_POSITION1 tailsitters use input_vel_accel method 2022-01-04 10:42:12 +11:00
Iampete1
4848ac9166 Plane: quadplane: don't use is_active_z(), becasue its wrong 2022-01-04 10:42:12 +11:00
Iampete1
fb1f6b57ad Plane: Quadplane: never run Z controller if motors are not throttle unlimited 2022-01-04 10:42:12 +11:00
Peter Hall
c215fa0745 Plane: Quadplane: never run Z controller in tailsiter VTOL transtion 2022-01-04 10:42:12 +11:00
Peter Hall
9df753551e Plane: quadplane: tailsitter: always relax pitch after transtion 2022-01-04 10:42:12 +11:00
Peter Hall
d054ca0426 Plane: quadplane: limit post VTOL transtion pitch rate on tailsitters in maunal modes 2022-01-04 10:42:12 +11:00
Peter Hall
67d7ba490f Plane: quadplane: pass time to tailsitter.in_vtol_transition where avalable 2022-01-04 10:42:12 +11:00
Iampete1
9634641323 Plane: tailsitter: rate limit pitch up in VTOL pos control flight. 2022-01-04 10:42:12 +11:00
Andrew Tridgell
2691022e12 Plane: update release notes for 4.1.6 2022-01-03 13:11:18 +11:00
Andrew Tridgell
2251293ec7 Plane: fix stabilize mode
should self-level. Broken by #19171
2022-01-03 08:09:53 +11:00
Iampete1
abe9e4425b Plane: quadplane: remvoe unused loiter initial pitch varable 2021-12-31 08:46:31 +11:00
Andrew Tridgell
fb019eb0f3 Plane: add a low pass filter to speed scaler
this is needed due to the filtering done on the target rate in
AC_PID. With a low filter rate in AC_PID a step in the speed scaler
results in a step in the FF output due to the mismatch in the
instantaneous SS and the filtered target rate
2021-12-29 18:36:05 +11:00
Peter Barker
e55eea961f ArduPlane: create and use AP_OPTICALFLOW_ENABLED 2021-12-29 18:12:03 +11:00
Andrew Tridgell
336b666f83 Plane: fixed stick mixing and throttle nudge in QRTL approach
thanks to Henry for noticing this
2021-12-28 16:04:12 +11:00
Peter Barker
d7fae5263f ArduPlane: adjust for rename of OpticalFlow.cpp 2021-12-28 10:16:20 +11:00
Samuel Tabor
a715472353 Plane: Specify starting location to set_offset_altitude_location 2021-12-27 11:27:52 +11:00
Hwurzburg
18e427d27d Plane: add Q_OPTION to force fw trans on fail instead of QLAND 2021-12-24 13:55:15 +11:00
Iampete1
2154738421 Plane: Quadplane: only advance to QPOS_POSITION2 once tilts have finished slewing 2021-12-22 18:46:14 +11:00
Iampete1
eac52fe08f Plane: quadplane: don't ouput VTOL throttle on tiltrotor with no VTOL motors and till fully forward 2021-12-22 18:46:14 +11:00
Iampete1
6116eaeb32 Plane: quadplane: enhance tiltrotor transtion to better deal with tiltrotors with all motors tilting 2021-12-22 18:46:14 +11:00
Andy Piper
aefc97fafa Plane: use calculated number of notches for dynamic harmonic 2021-12-22 18:13:38 +11:00
Andrew Tridgell
db0f06fb58 Plane: update release notes for 4.1.6beta1 2021-12-21 13:21:50 +11:00
Peter Barker
278899e44c ArduPlane: tidy log message id definitions
Add a comment indicating only 20 ids are available to the vehicle
2021-12-21 10:42:18 +11:00
Jaaaky
50430d9fc8 ArduPlane: Fix multi #include's 2021-12-21 10:38:46 +11:00
Iampete1
055d90d49b Plane: tailsitter: add gains to scale control surface vs motors 2021-12-21 10:14:34 +11:00
Gone4Dirt
d244a0b803 Plane: Make RPM log independant of RC log mask 2021-12-16 12:48:48 +11:00
Samuel Tabor
c44fed34d4 AP_Soaring: Override airspeed and flap angle. 2021-12-16 07:12:24 +11:00
Peter Barker
08a8b3f155 Plane: use @CopyValuesFrom for FLTMODEn parameters 2021-12-16 07:11:33 +11:00
Iampete1
8aa4a802f3 Plane: tiltrottor: add missing ff terms 2021-12-14 10:14:28 +09:00
Andrew Tridgell
c746efff4f Plane: updated release notes for 4.1.5 2021-12-13 10:55:44 +11:00
Hwurzburg
049f5f2135 Plane: fix divide by zero in transition time 2021-12-10 19:10:51 -08:00
Andrew Tridgell
1c89b7f3a2 Plane: check for VTOL takeoff in AUTO
if the "only arm in Q modes" bit is set in Q_OPTIONS then check that
in AUTO mode we are in a VTOL takeoff WP
2021-12-07 12:51:18 +11:00
Hwurzburg
274111a5ea ArduPlane: clean up short failsafe 2021-12-07 10:09:33 +11:00
Andrew Tridgell
522056d6f7 Plane: release notes for 4.1.5beta1 2021-12-04 18:06:38 +11:00
Andrew Tridgell
ca13503f41 ArduPlane: revert compass parameter changes 2021-12-04 16:51:53 +11:00
Andrew Tridgell
e7c7cdd653 Plane: reset VTOL takeoff if not armed
we need to reset the takeoff target position while disarmed so we
don't use spurious position information from before we get good GPS
lock.

also remove the "Resetting previous waypoint" message as it doesn't
provide useful information and is just a distraction (it would be
printed continuously while waiting for arming with this PR)
2021-12-04 16:51:02 +11:00
Andrew Tridgell
e342ce0da4 Plane: fixed reset of steering locked course
reset when we have not been steering for 1s, to ensure that an old
locked course is not used
2021-12-04 07:41:35 +11:00
Andrew Tridgell
5f52171776 Plane: added QRTL as RCn_OPTION 2021-12-02 08:29:07 +11:00
Andrew Tridgell
de4a4a775a Plane: fixed use before init bug in VTOL land
found by Peter Barker with valgrind
2021-12-01 19:42:42 +11:00
Andrew Tridgell
56870ad7d6 Plane: use yaw rate controller in NAV_SCRIPT_TIME 2021-11-30 16:19:26 +11:00
Andrew Tridgell
55d8afa1dd Plane: support autotune for yaw rate control 2021-11-30 16:19:26 +11:00
Andrew Tridgell
b619ee4970 Plane: added support for rate yaw control
to enable for ACRO mode, set ACRO_YAW_RATE to desired maximum rate in
degrees/second, and set YAW_RATE_ENABLE=1 to enable PID tuning of yaw
rate controller

pair programmed with Andy Palmer and Matthew Hampsey
2021-11-30 16:19:26 +11:00
Iampete1
06c9a69975 Plane: remove compass params underscore 2021-11-30 08:14:43 +09:00
Josh Henderson
52adda7c4c Plane: INAV rename for neu & cm/cms 2021-11-30 10:08:07 +11:00
Josh Henderson
c6dd39773d ArduPlane: inav use _xy() 2021-11-30 10:08:07 +11:00
Andrew Tridgell
1af384ad12 Plane: updated release notes for 4.1.4 2021-11-25 09:05:29 +11:00
Andrew Tridgell
36562ed30b Plane: limited VFWD integrator to cruise throttle
in some situations (such as when landing approach is disabled) the
vfwd integrator can wind up to extreme values. This can put a huge
load on an electric quadplane as it is running both forward and vtol
motors, and the downforce from being nose down can be extreme.

It should never need to go above the cruise throttle in any reasonable
situation, so limit it to cruise to ensure we don't apply too much
forward throttle
2021-11-24 18:49:24 +11:00
kniuk
6581afcb8d deleted set_target_altitude_location from set_next_WP 2021-11-24 18:08:26 +11:00
Andrew Tridgell
77c43d9ba1 Plane: limiting POS1 landing target speed
prevent very high target speeds when the target velocity profile is
above the initial speed in POSITION1. Always allow up to 2*Q_WP_SPEED,
but don't go above the initial speed
2021-11-24 07:15:21 +11:00
Andrew Tridgell
8d59e6fa48 Plane: fixed variable name
thanks to Peter for noticing
2021-11-22 13:15:29 +11:00
Hwurzburg
5cafccd447 ArduPlane: fix flare rc switch action with flight option bit 10 active 2021-11-21 21:00:04 +11:00
Peter Hall
151ef760a4 Plane: quadplane: log postition controller PIDs 2021-11-21 09:01:58 +11:00
Andrew Tridgell
734edd8085 Plane: fixed chute release on low value of RC option
only release on flag high
fixes #18843
2021-11-18 15:19:18 +11:00
Andrew Tridgell
ae81bbc5ed Plane: suppress spurious EKF yaw reset message
this makes plane match copter, emitting a yaw reset event, but not
worrying user. This message came out on each boot when EKF3 first
became active
2021-11-17 20:54:12 +11:00
Michel Pastor
685d34d615 Plane: fix bug causing wrong thr max and slew to be used during takeoff
Fix bug introduced in 3d34e061fe which causes flight_stage to be
FLIGHT_NORMAL instead of FLIGHT_TAKEOFF during takeoff stage causing
itself at least the use of THR_MAX and THR_SLEWRATE instead of
respectively TKOFF_THR_MAX and TKOFF_THR_SLEW and perhaps has other
consequences.

Could be really bad if TKOFF_THR_MAX needs to be much higher
than THR_MAX or if TKOFF_THR_SLEW needs to be much lower than
THR_SLEWRATE and cause a crash on takeoff due to low airspeed or torque
roll
2021-11-17 19:37:39 +11:00
Iampete1
9210488550 Plane: quadplane: limit pitch for all transitions into position control modes 2021-11-17 19:10:56 +11:00
Peter Barker
17395f362e ArduPlane: allow specification of Scheduler table priorities 2021-11-17 19:00:04 +11:00
Andrew Tridgell
e5106b990e Plane: update release notes for 4.1.3 2021-11-16 16:08:18 +11:00
Peter Barker
70562021ac ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED 2021-11-15 20:27:40 +11:00
Peter Barker
203103bae5 ArduPlane: ensure ENABLE_SCRIPTING is always defined 2021-11-15 20:27:40 +11:00
Iampete1
b9d240460b Plane: remove SpdHgt and use TECS direct 2021-11-13 08:05:39 +11:00
Andrew Tridgell
de44dceda4 Plane: enable fixed wing autotune switch 2021-11-10 18:46:34 +11:00
Iampete1
773c48b30c Plane: tailsitter: start transtion from desired pitch not actual 2021-11-09 13:44:30 +00:00
Iampete1
51caf15f94 Plane: manual stabilize: keep nav pitch and roll up to date 2021-11-09 13:44:30 +00:00
Iampete1
68f252e0df Plane: tiltrotor: allow tilt wing as flap 2021-11-09 10:46:09 +11:00
Iampete1
5ba2bd675a Plane: move quadplane arming checks to own function and add angle max and tiltrotor / tailsitter checks 2021-11-09 10:45:22 +11:00
Peter Barker
7c3de472b2 Plane: support send_extended_sys_state 2021-11-09 10:22:24 +11:00
Andrew Tridgell
893046608c Plane: update release notes for 4.1.3beta1 2021-11-09 09:27:27 +11:00
Andrew Tridgell
0c1e576544 Plane: added support for NAV_SCRIPT_TIME 2021-11-08 21:08:52 +11:00
Andrew Tridgell
d3742989ef Plane: default rate max to 75 for quadplane VTOL
this reduces overshoot when VTOL tune is less than ideal
2021-11-07 06:58:53 +11:00
Andrew Tridgell
debae1381c Plane: fixed a bug in POSITION1 speed thresholds
we were comparing two different speeds in the threshold for going to
Q_WP_SPEED limit. The reason the two speeds were different was the
wp_nav init happened before the defaults were setup for quadplanes

this fixes both bugs
2021-11-06 20:00:10 +11:00
Peter Barker
554e7f8d1c ArduPlane: move EFI to AP_Vehicle 2021-11-05 09:22:17 +11:00
Peter Barker
6a12d3f5d9 Plane: use enum class for StickMixing 2021-11-03 18:06:00 +11:00
Iampete1
e33954d561 Plane: tailsitter transition tidyups 2021-11-02 10:14:36 +11:00
Iampete1
af8688b300 Quadplane: add transiton class 2021-11-02 10:14:36 +11:00
Iampete1
9073d16b09 Tiltrotor: add transtion class 2021-11-02 10:14:36 +11:00
Iampete1
ce5b81869d Plane: Tailsitter: add transtion class 2021-11-02 10:14:36 +11:00
Iampete1
7af1b40fb8 Plane: system use new transtion class 2021-11-02 10:14:36 +11:00
Iampete1
99d98cc5b8 Plane: add transition class as friend 2021-11-02 10:14:36 +11:00
Iampete1
23a413946b Plane: Qacro: use new transition class 2021-11-02 10:14:36 +11:00
Iampete1
f25e5087c0 Plane: attitude: use new transition class 2021-11-02 10:14:36 +11:00
Andrew Tridgell
9c617a18f4 Plane: suppress rate D terms in ground mode
this prevents a common oscillation issue on the ground
2021-10-30 18:45:53 +11:00
Andrew Tridgell
b74dca02ca Plane: avoid qpos approach when very close to destination
this prevents a fwd transition when doing something like LOITER_TIME
close to a VTOL_LAND wp. We use 1.5 times the stopping distance at
cruise airspeed for the threshold
2021-10-29 20:22:19 +11:00
Andrew Tridgell
19b5044223 Plane: fixed VTOL state error when using Q_ENABLE=2
this ensures the poscontrol state is reset if it has not been
initialised before a VTOL loiter operation

thanks to Pete Hall for finding this
2021-10-29 20:22:19 +11:00
Andrew Tridgell
51ccc1822c Plane: rename ReleaseNotes.txt to be more consistent with copter 2021-10-27 15:32:32 +11:00
Hwurzburg
8d94e58ec9 ArduPlane: add RC option to plane for emergency remote landing that forces FS actions to FBWA 2021-10-26 10:34:28 +11:00
Iampete1
bfbd0d93c1 Plane: Quadplane: continue in mode loiter to Qland on failsafe, as with Qland 2021-10-26 10:13:55 +11:00
Hwurzburg
085c5c815b Plane: Fix bug with mode return on short fs exit and add FBWB action 2021-10-26 10:12:48 +11:00
Sebastian Quilter
013de11916 ArduPlane: make rangefinder ranges m rather than cm 2021-10-21 21:28:53 +11:00
Iampete1
73e9c9bb43 Plane: quadplane: forward throttle reutrn float 2021-10-20 18:29:58 +11:00
Iampete1
2f93c1f9e4 Plane: stabilizer roll and pitch to floats 2021-10-20 18:29:58 +11:00
Iampete1
b31ce6734a Plane: get throttle input return float 2021-10-20 18:29:58 +11:00
Iampete1
2f4661c52f Plane: use float for set/get output scaled 2021-10-20 18:29:58 +11:00
Peter Barker
bcad5a7ba6 ArduPlane: handle renaming of AP_InertialNav_NavEKF to AP_InertialNav 2021-10-20 18:09:36 +11:00
Peter Barker
987d67b867 ArduPlane: move SITL object up to AP_Vehicle 2021-10-19 11:34:43 +11:00
Peter Barker
eef8115ffc ArduPlane: factor substring from allocation_error parameter 2021-10-18 12:49:44 +11:00
Andrew Tridgell
5684ca13fa Plane: update release notes for 4.1.2 2021-10-17 15:51:50 +11:00
Andrew Tridgell
34110e387f Plane: update release notes for 4.1.2beta2 2021-10-16 20:45:37 +11:00
Tom Pittenger
c450145fd5 Plane: move ADSB mavlink handling from vehicles to common library 2021-10-14 19:55:27 -07:00
Josh Henderson
8af299f978 Plane: HIGH_Latency2 check get_temperature return and return INT8_MIN 2021-10-13 19:40:45 +11:00
Andrew Tridgell
faba02a3f5 Plane: apply the takeoff throttle slew limit to quadplanes
this applies the limit when we are in a fwd transition, both in AUTO
modes and stabilized modes
2021-10-13 18:53:45 +11:00
Iampete1
e99a5c6ef4 Plane: Quadplane: reinstate THR PWM param discriptions for stable users 2021-10-11 22:19:17 -04:00
Iampete1
30c9cccf78 Plane: Quadplane remove THR_MIN_PWM and THR_MAX_PWM 2021-10-11 22:19:17 -04:00
Iampete1
d1d6342165 Plane: update_throttle_range dont set_throttle_range 2021-10-11 22:19:17 -04:00
Andrew Tridgell
493d8979d5 Plane: reset target speed on disarm
allows for multiple auto missions with DO_CHANGE_SPEED
2021-10-11 10:47:52 +11:00
Andrew Tridgell
bf425a1edf Plane: update release notes for 4.1.2beta1 2021-10-10 18:08:36 +11:00
Andrew Tridgell
570ecdc2e0 Plane: don't apply fw pitch limit in VTOL control for tailsitters
tailsitters may have narrow fixed wing limits but need high limits for
landing in high wind

found this on a HWing which was essentially impossible to auto land
2021-10-10 06:35:20 +11:00
Andrew Tridgell
8550765c25 Plane: update release notes for 4.1.1
# Conflicts:
#	ArduPlane/mode_qrtl.cpp
#	ArduPlane/quadplane.cpp
P
2021-10-08 13:31:04 +11:00
Peter Barker
3a6a6b63f2 Plane: use mode name instead of number in failsafe text
We have the method, we should use it
2021-10-07 13:01:07 +11:00
Hwurzburg
4e731bf4e2 Plane: add VTOL POS1 notification to QRTL mode 2021-10-06 11:38:32 +11:00
Peter Barker
3e031e78e5 Plane: add comment about us sending airspeed error in wrong units 2021-10-05 11:20:55 +11:00
Andrew Tridgell
2be23fff2b Plane: obey Q_RTL_ALT when in POS1 and POS2 states
this fixes the alt target for when user has disabled the quadplane
approach code
2021-10-02 12:46:59 +10:00
Hwurzburg
636358b668 Plane: add param for throttle control in transition to VTOL 2021-10-01 22:04:51 +01:00
Iampete1
c178962200 Plane: tailsitter: only apply throttle scaling once in assised flight 2021-10-01 22:04:51 +01:00
bugobliterator
ae4d368267 Plane: replace config_error with allocation_error 2021-09-30 08:51:26 +10:00
Peter Barker
e1aa863eae Plane: stop passing current_loc into AP_Camera 2021-09-29 18:33:01 +10:00
Iampete1
958748f8cf Plane: tailsitter: reset FW yaw I allong with roll and pitch when in assist 2021-09-29 17:12:33 +10:00
Michel Pastor
7cb2619413 Plane: fix flawed logic in throttle voltage comp params check 2021-09-29 17:05:17 +10:00
Andrew Tridgell
b417aad807 Plane: update release notes for 4.1.0 stable 2021-09-28 15:53:18 +10:00
Iampete1
a350ebb358 Plane: quadplane: do_vtol_land remove uneded I reset 2021-09-28 10:51:21 +10:00
Iampete1
4b62bd9180 Plane: add Loiter to QLand to Flight mode switch 2021-09-28 09:31:13 +10:00
Iampete1
682798d044 PLane: support Loiter to Qland battery failsafe action 2021-09-28 09:31:13 +10:00
Iampete1
0a1cad772c Plane: LoiterAltQLand: support handle_guided_request 2021-09-28 09:31:13 +10:00
Iampete1
a0260b05b3 Plane: handle_guided_request per mode 2021-09-28 09:31:13 +10:00
Iampete1
1148bb1234 Plane: Quadplane: add loiter to alt then QLAND mode 2021-09-28 09:31:13 +10:00
Iampete1
0549e08c5c Plane: add mehtod to check terrain by mode 2021-09-28 09:31:13 +10:00
Iampete1
dc2ba8236a Plane: trim_radio: check manual mode and rotation rates and add mesages 2021-09-28 09:16:24 +10:00
Iampete1
90dd36285e Plane: support TRIM_TO_CURRENT_SERVO_RC RC option to trigger trim radio function 2021-09-28 09:16:24 +10:00
Iampete1
cbfa4e5746 Plane: remove trim_radio mavlink option 2021-09-28 09:16:24 +10:00
Iampete1
8e693e5cd1 Plane: remove TRIM_AUTO param 2021-09-28 09:16:24 +10:00
Andrew Tridgell
fd5faa866f Plane: always log QPOS when changing control state 2021-09-27 21:21:53 +10:00
Andrew Tridgell
9d0b7f8efe Plane: removed set_state to QPOS_POSITION1 in do_vtol_land
we are immediately replacing the state with QPOS_APPROACH, so the
set_state is not needed, and triggers a call to
attitude_control->reset_yaw_target_and_rate() which can badly impact
euler rates for tailsitters
2021-09-27 21:21:53 +10:00
Peter Hall
e83b598040 Plane: Quadplane: check attitude relax before running controllers, don't run controls if not going to output 2021-09-25 12:53:11 +10:00
bugobliterator
4b62dd75b0 ArduPlane: fix casting to pass format check 2021-09-22 21:36:34 +10:00
Iampete1
cdfda2bd9b Plane: allow arming in quided with only arm in Qmodes Q_OPTION 2021-09-22 18:14:16 +10:00
Iampete1
b63e68a5ef Plane: fix RC init order to avoid error message 2021-09-21 17:49:47 +10:00
Peter Barker
9aee98eeb8 Plane: log groundspeed undershoot 2021-09-21 11:12:17 +10:00
Bob Long
84a89b0b94 Plane: fix units in Plane::get_wp_distance_m() 2021-09-21 09:40:00 +10:00
Bob Long
728d1e76fe Plane: clean up cm-to-m conversion in nav_control_output 2021-09-21 09:40:00 +10:00
Bob Long
f2d32fc800 Plane: quadplane: fix wp_dist reporting for VTOL landings
After hitting the approach stage of a VTOL landing in auto, nav_controller_output sends zero as the distance to waypoint.
2021-09-21 09:40:00 +10:00
Iampete1
df36853da2 Plane: support ARMDISARM_AIRMODE 2021-09-21 09:36:24 +10:00
Iampete1
cc89a8cc48 Plane: remove airmode Q_OPTION 2021-09-21 09:36:24 +10:00
Iampete1
db416bbeef Plane: convert to new ARMDISAM based on quadplane param 2021-09-21 09:36:24 +10:00
Shiv Tyagi
cdb4ec8ad0 Plane : Improved LAND_THEN_NEUTRL to work on all control surfaces
This fixes the issue #18593

Co-Authored-By: Peter Hall <33176108+IamPete1@users.noreply.github.com>
2021-09-17 22:06:24 -05:00
Andrew Tridgell
baec0d83f2 Plane: moved accel cal update to vehicle code 2021-09-17 14:07:14 +10:00
Andrew Tridgell
7547ad53d3 Plane: allow for new guided destination during guided takeoff
if you set a very high alt for takeoff this is useful
2021-09-17 10:06:08 +10:00
Andrew Tridgell
8bee839931 Plane: fixed overshoot in guided takeoff of quadplanes 2021-09-17 10:06:08 +10:00
Iampete1
c4a1ae42e5 Plane: Quadpalne: move tiltrotor functionality to own class 2021-09-17 08:24:17 +10:00
Iampete1
1d5ea351c4 Plane: re-init RTL modes if home set 2021-09-15 14:10:15 +01:00
Iampete1
478bf37246 Plane: used correct WP radius for VTOL flight 2021-09-15 20:36:56 +10:00
Iampete1
a368549a9d Plane: tailsitter: only flag tilt limit on vectored vehicles 2021-09-15 18:03:12 +10:00
Andrew Tridgell
ad8669ae74 Plane: update release notes for 4.1.0beta8 2021-09-15 14:21:12 +10:00
Hwurzburg
01c41dc213 Plane:Tailsitter: add relaxed POSXY defaults 2021-09-15 07:40:12 +10:00
Peter Barker
974af3edea Plane: correct compilation when QUADPLANE disabled 2021-09-14 13:55:01 +10:00
Peter Barker
3d34e061fe ArduPlane: add and use HAL_QUADPLANE_ENABLED 2021-09-14 11:23:18 +10:00
Josh Henderson
1da21c3b21 Quadplane: use vector.xy().length() instead of norm(x,y) 2021-09-14 10:43:46 +10:00
Andrew Tridgell
cb307891e0 Plane: fixed bad yaw rate demands in tailsitter fixed wing modes
this prevents the pilot putting in crazy yaw rate demands due to the
use of rudder stick in fixed wing modes for tailsitters while still
allowing for FBWA flat turns if the user wants them.

It uses the existing RUDD_DT_GAIN parameter for a gain scaling of yaw
rate for copter tailsitters
2021-09-14 07:55:40 +10:00
Iampete1
b18da48f39 Plane: remove AUTO_FBW_STEER 2021-09-12 22:12:32 -05:00
Andrew Tridgell
3ec53e2aec Plane: prepare for 4.1.0beta7 2021-09-11 09:48:31 +10:00
Leonard Hall
f3dc47ce3d Copter: Add units to the AC_AttitudeControl Library 2021-09-09 08:01:14 +09:00
Iampete1
e6968395c6 Plane: remove none-functional NAV_CONTROLLER param 2021-09-08 20:32:52 +09:00
Iampete1
71e2e25313 Plane: attitude: in vtol modes call mode run and stabalize with surfaces 2021-09-08 18:06:58 +10:00
Iampete1
c73207b4b0 Plane: quadplane: remove init mode and control run methods 2021-09-08 18:06:58 +10:00
Iampete1
a985e47d45 Plane: system: don't try and switch to VTOL modes if quadplane is not enabled 2021-09-08 18:06:58 +10:00
Iampete1
e4feea9457 Plane: mode enter init auto state vtol mode to is_vtol_mode 2021-09-08 18:06:58 +10:00
Iampete1
2582159d1a Plane: mode.h remove init method 2021-09-08 18:06:58 +10:00
Iampete1
fae22b34b7 Plane: mode_qstabilize: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1
63be15e018 Plane: mode_qrtl: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1
fa908b0a1d Plane: mode_qloiter: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1
70d9d20faf Plane: mode_qland: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1
5ebd439712 Plane: mode_qhover: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1
f055471d8a Plane: mode_qautotune: call init 2021-09-08 18:06:58 +10:00
Iampete1
64aba43b56 Plane: mode_qacro: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1
fd7a879c85 Plane: remove unused params 2021-09-08 17:21:23 +10:00
Hwurzburg
327f3a0803 ArduPlane: add option for man throttle center to be TRIM_THROTTLE 2021-09-07 10:02:26 +10:00
Iampete1
95fbf39f72 Plane: quadplane: check_attitude_relax use the last time the controllers were run not the last time relax was checked 2021-09-07 09:09:47 +10:00
Iampete1
fb8fb34cfc Plane: tailsitter: don't relax attitude control in transision to VTOL, rely on check_attitude_relax to do the right thing 2021-09-07 09:09:47 +10:00
Hwurzburg
5ca652a243 Plane: rename tailistter motor class to more correct singl/dual motor layout 2021-09-06 10:14:05 +10:00
Peter Barker
d6a2056cca ArduPlane: make bad-mode-number notification consistent across vehicles 2021-09-01 19:45:46 +09:00
Peter Barker
0a8e1575b1 Plane: reuse set_mode_by_number implementation
Was just duplicated
2021-09-01 19:45:46 +09:00
Iampete1
88f2f7ccae Plane: remove unused param OVERRIDE_SAFETY 2021-09-01 18:46:18 +10:00
Andrew Tridgell
3bb17697fd Plane: fixed params for Q_TAILSIT_ENABLE 2021-09-01 14:04:35 +10:00
Iampete1
7f8b7b66a9 Plane: tailsitter: add enable = 2 for force q assit and assisted flight airmode 2021-09-01 08:33:24 +10:00
Iampete1
f1477a6c29 Plane: quadplane: add assisted flight only airmode 2021-09-01 08:33:24 +10:00
Iampete1
4efa9866fa Plane: arming: do not disable asisted flight airmode on disarm 2021-09-01 08:33:24 +10:00
Iampete1
46670f7bd0 Plane: quadplane: move tailsitter items to dedicated setup 2021-09-01 08:33:24 +10:00
Iampete1
700a92f036 plane: quadplane: tailsitter: run FW transition check and assist immediately 2021-08-31 10:34:33 +10:00
Peter Hall
657fcb7f59 Plane: quadplane: set last_pidz_init_ms 2021-08-31 09:58:03 +10:00
Iampete1
3c44a4fe6b Plane: radio: remove recompute_pwm_no_deadzone calls in training mode 2021-08-31 09:48:59 +10:00
TunaLobster
d31f3eb4c5 Plane: Add TRIM_PITCH_CD FLIGHT_OPTIONS bits for GCS and OSD 2021-08-31 09:32:10 +10:00
Andrew Tridgell
a39a948c57 Plane: updated releases notes for 4.1.0beta6 2021-08-29 11:35:08 +10:00
Peter Barker
bfe9208849 ArduPlane: add and use HAL_BUTTON_ENABLE 2021-08-25 19:03:42 +10:00
Iampete1
70ab9ba3b6 Plane: tailsitter: remove pilot prop-hanging teaching params and code. 2021-08-25 18:47:51 +10:00
Hwurzburg
551d55a85c ArduPlane: add thr position trigger to ThrLandCtrl Q_OPTION 2021-08-25 12:32:59 +10:00
Andrew Tridgell
3228b0e670 Plane: added MCU_STATUS message 2021-08-25 07:11:31 +10:00
Iampete1
d372907a98 Plane: Quadplane: add Q_OPTION to only allow arming in Qmodes and auto. 2021-08-24 10:39:12 +10:00
Samuel Tabor
65a38b26a4 ArduPlane: altitude: rangefinder correction should be relative to the altitude source being used for navigation. This avoid applying it twice when there is an existing correction saved. 2021-08-19 17:59:33 +10:00
Andrew Tridgell
e1b73a5198 Plane: added slew rate and Dmod for PID_TUNING message 2021-08-19 12:08:54 +10:00
TunaLobster
cbf6c2926f ArduPlane: Remove @RebootRequired: False 2021-08-19 10:00:16 +10:00
Peter Barker
e0d03ce565 ArduPlane: move wind-estimation-enabled state to frontend 2021-08-18 18:37:39 +10:00
Peter Barker
a84fda9b1f Plane: adjust for rename yaw_initialised -> dcm_yaw_initialised 2021-08-18 18:37:39 +10:00
Peter Barker
5afaacc320 ArduPlane: stop sending SENSOR_OFFSETS
Only works for first compass instance.

We have all of these in parameters anyway.
2021-08-18 18:06:24 +10:00
Andrew Tridgell
58c823284c Plane: mark logger Write() calls as streaming where appropriate 2021-08-18 10:20:03 +10:00
Andrew Tridgell
497a7c9819 Plane: fixed EKF fly-forward flag for tailsitters
for tailsitters that are always using the VTOL controllers (forced
QAssist) we need a different way to determine the fly-forward flag
2021-08-17 20:48:36 +10:00
Iampete1
baf2b4a3d8 Plane: Qstabilize: mode functions to ModeQStabilize 2021-08-17 11:46:49 +10:00
Iampete1
44e63861ce Plane: QRTL: move functions to ModeQRTL 2021-08-17 11:46:49 +10:00
Iampete1
f75919e727 plane: QLoiter: move functions to ModeQLoiter 2021-08-17 11:46:49 +10:00
Iampete1
921116e7a3 Plane: QLand: move functions to ModeQLand 2021-08-17 11:46:49 +10:00
Iampete1
737096f342 Plane: QHover: move functions to ModeQHover 2021-08-17 11:46:49 +10:00
Iampete1
a1fa683272 plane: Qautotune: move functions to ModeQAutotune 2021-08-17 11:46:49 +10:00
Iampete1
e293866245 plane: Qacro: move functions to ModeQAcro 2021-08-17 11:46:49 +10:00
Peter Barker
515a994c59 ArduPlane: move VehicleClass handling to AHRS frontend
.... and renaming the enumeration while we're at it
2021-08-17 10:34:07 +10:00
Iampete1
bd2fed31ee Plane: actualy fail to enter mode, don't just put the mode back and reutrn true 2021-08-17 10:20:53 +10:00
Iampete1
59a158d7be Plane: don't output throtte in when safe 2021-08-16 21:22:35 +10:00
Andrew Tridgell
c6efbdd359 Plane: update release notes for 4.1.0beta5 2021-08-16 15:19:43 +10:00
Hwurzburg
9ab0d2e387 ArduPlane: add CRUISE mode RC AUX Function switch 2021-08-11 18:35:05 +10:00
Andrew Tridgell
d1d0ab41d6 Plane: added option to log PIDs at full rate
useful for tuning quadplanes
2021-08-10 10:13:36 +10:00
Peter Barker
5dab6b7275 Plane: remove pointless override of send_simstate
This is dangling after removing HIL stuff
2021-08-10 09:48:34 +10:00
Iampete1
a1ecd706b7 Plane: notify buzzer on every mode change 2021-08-10 09:47:33 +10:00
Leonard Hall
65b58dea85 Plane: fix PID filter names FILT -> FLTE, D_FILT -> FLTD 2021-08-10 08:33:56 +09:00
Peter Hall
ed4345cb3b Quadplane: tailsitter: provide assistance at min throttle 2021-08-08 19:41:22 +10:00
Peter Hall
2527117cf9 Quadplane: combine assistance_needed and assistance_safe functions 2021-08-08 19:41:22 +10:00
Hwurzburg
80b4cd7ae9 ArduPlane: correct Mission Reset override behaviour in Plane 2021-08-06 10:17:25 +10:00
bugobliterator
c8b2f009fd Plane: change class name from SITL::SITL to SITL::SIM 2021-08-05 07:25:31 +10:00
Tom Pittenger
7f9bbc9cfd Plane: fix ADSB stall speed units. Was accidently using meter/s instead of cm/s 2021-08-04 07:08:24 -07:00
Samuel Tabor
23f6f38390 Plane: soaring: No action if in landing sequence. 2021-08-04 06:52:56 +10:00
Josh Henderson
66cd413473 ArduPlane: remove POSITION_TARGET_TYPEMASK_FORCE_SET 2021-08-03 12:48:38 +10:00
Iampete1
7ff592d29e Plane: Quadplane: move mode functions to mode classes in-place 2021-08-03 12:28:31 +10:00
Iampete1
4a5e4f9c85 Plane: mode: add quadplane refences 2021-08-03 12:28:31 +10:00
Iampete1
a808d5c688 Plane: mode: add run and init methods 2021-08-03 12:28:31 +10:00
Iampete1
03d17437c3 Plane: mode_takeoff: call base mode constuctor 2021-08-03 12:28:31 +10:00
Peter Barker
435988a300 Plane: don't reset home on GPS startup on watchdog reset 2021-08-03 10:36:50 +10:00
Peter Barker
cfe25f71e3 ArduPlane: use mission singleton inside AP_AdvancedFailsafe 2021-08-03 10:35:24 +10:00
Andrew Tridgell
e7702a4216 Plane: mark log messages as streaming 2021-08-03 10:23:36 +10:00
Hwurzburg
1e4a6c9236 ArduPlane: Correct OSD horizon for VTOL modes and TRIM_PITCH_CD in Fixed Wing 2021-08-03 10:09:28 +10:00
Peter Barker
7e8f812909 Plane: don't allow motortest if motors not allocated 2021-08-02 10:24:49 +10:00
Andrew Tridgell
b037507c48 Plane: mark master as 4.2.0dev 2021-08-01 06:06:26 +10:00
Peter Barker
c348f602d9 ArduPlane: use AP::compass().available in place of enabled() 2021-07-30 12:19:42 +10:00
Peter Barker
85e8b362a7 ArduPlane: stop using AHRS as conduit for Compass pointer 2021-07-30 12:19:42 +10:00
Peter Barker
c1e263695f Plane: remove unimplemented function declaration 2021-07-30 11:23:06 +10:00
Iampete1
f18428b357 Plane: #ifdef scripting specific functions 2021-07-28 18:18:32 +10:00
Hwurzburg
b539a534e9 Plane: improve description of Q_TRIM_PITCH 2021-07-27 12:49:33 +10:00
Iampete1
beefd95079 Plane: QuadPlane: tailsitter param conversion, set and use new enable param 2021-07-27 09:08:34 +10:00
Iampete1
0eab3faf32 Plane: use new tailsiter class 2021-07-27 09:08:34 +10:00
Iampete1
2bc2b9533b Plane: QuadPlane: move tailsitter to class 2021-07-27 09:08:34 +10:00
Andrew Tridgell
716697f337 Plane: updated release notes for 4.1.0beta4 2021-07-25 18:31:48 +10:00
Andrew Tridgell
73952dfecb Plane: update ATRP logging 2021-07-24 15:32:55 +10:00
Andrew Tridgell
f472da8e90 Plane: added ONESHOT_MASK parameter
after discussion with Paul on servo latency
2021-07-23 14:47:14 +10:00
Andrew Tridgell
1ae669bb01 Plane: added manual input expo for MANUAL, ACRO and TRAINING
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00
Andrew Tridgell
c0d942af4c Plane: disable EKF3 default airspeed fusion by default
this fusion can cause problems with wind estimation, disable by
default for now
2021-07-22 18:20:45 +10:00
Andrew Tridgell
8e6abf5976 ArduPlane: replaced Pixhawk with more appropriate wording in docs 2021-07-22 07:48:12 +10:00
Peter Barker
06c2faaec5 ArduPlane: rename for AHRS restructuring 2021-07-21 21:01:39 +10:00
Peter Barker
e3b8fc6646 ArduPlane: remove ability to use DCM as AHRS 2021-07-21 21:01:39 +10:00
Peter Barker
354c1091f8 ArduPlane: stop taking references to ahrs in APM_Control 2021-07-21 18:27:23 +10:00
Hwurzburg
19213d3627 Plane: Allow yaw at zero throttle in VTOL descents 2021-07-20 11:10:25 +10:00
Iampete1
015b971ccb Plane: add new dynamic mixer frame class 2021-07-20 09:19:28 +10:00
Andrew Tridgell
d41e400c86 Plane: added acro and training modes RC option 2021-07-20 09:00:46 +10:00
Peter Barker
93323f1f39 Plane: stop setting terrain singleton; libraries use singleton 2021-07-12 17:34:44 +10:00
Leonard Hall
7db568c85a Plane: seperate kinimatic shaping from pid limit setting 2021-07-10 20:25:05 +09:00
WillyZehnder
0ce6157900 Plane: GCS_Plane.cpp Fix chronological sequence
to avoid inappropriate critical warning CRT:NoRCReceiver by ensuring the
call of plane.failsafe.last_valid_rc_ms before calling millis()
2021-07-07 18:56:09 +10:00
Peter Barker
5b7ec1fab4 Plane: do not run any prearm checks if we are armed or arming is not required
Co-authored-by: TunaLobster <unknown>
2021-07-07 18:20:54 +10:00
Stephen Dade
d6a123b58b ArduPlane: Add support for HIGH_LATENCY2 messages 2021-07-07 17:10:05 +10:00
Hwurzburg
8dee32e64f Plane: Add TX FF tuning for Pitch/Roll/Yaw QuadPlane PIDs 2021-07-06 09:00:16 +10:00
Andrew Tridgell
7ca0aa7c94 Plane: updated release notes for 4.1.0beta3 2021-07-05 16:24:04 +10:00
Andrew Tridgell
8482f9af27 Plane: fixed motor test with DShot VTOL motors
need to arm when running the motor test
2021-07-05 07:36:28 +10:00
Samuel Tabor
5e5452cf73 Plane: mode_thermal: adjust messages to reference parameter names 2021-06-30 18:21:03 +10:00
Hwurzburg
ac76a63931 ArduPlane: remove values metadata from log bitmask 2021-06-30 09:24:26 +09:00
Hwurzburg
8310f4a718 Plane: fix bug in tilt position for QLOITER and QRTL if THR_MIN !=0 2021-06-29 10:58:11 +10:00
Andrew Tridgell
92197bd5a9 Plane: fixed longitude wrap in verify_nav_wp
thanks to @Khancyr
2021-06-25 15:33:55 +10:00