Andrew Tridgell
e260c7ad59
HAL_ChibiOS: update f303-MatekGPS to allow disable of MSP
...
and use DMA for MSP
2021-01-01 15:40:13 +11:00
David B. Bitton
8dbe0a71ba
AP_HAL_ChibiOS: add support for Toshiba LED
2020-12-31 11:02:10 -08:00
Andy Piper
401e5c2073
AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
...
add support for sampling GPIO pins using timer
don't restart pwm group when not doing bi-dir
fix hwdef generation preproc for TIM DMA
decode telemetry at the start of the dshot cycle
calculate dshot pulse separation correctly and ensure we output rapidly enough
calculate dshot min periods and timeouts correctly
refactor dshot_send() into dshot_send_groups()
use bi-dir dshot channel mask
selectively enable bi-dir RC Channels
process bi-dir mask correctly when allocating DMA channels
allow UP and CH DMA channel sharing
optionally enable bidir vars in hwdef.
enable bi-dir dshot in KakuteF7Mini
enable bi-dir dshot in OmnibusF4Pro
enable bi-dir dshot in OmnibusNanoV6
enable bi-dir dshot in MatekF405
enable bi-dir dshot in fmuv5
enable bi-dir dshot in fmuv3
enable bi-dir dshot in OmnibusF7V2
enable bi-dir dshot in OmnibusNanoV6
enable bi-dir dshot in CubeOrange
enable bi-dir dshot in Pixracer
enable bi-dir dshot in mRoPixracerPro
Co-authored-by: bugobliterator <siddharthbharatpurohit@gmail.com>
2020-12-30 19:14:16 +11:00
Andy Piper
07f199ea1a
AP_HAL_ChibiOS: rename system_initialized() and add is_system_initialized()
2020-12-30 18:16:59 +11:00
Andy Piper
83c8807b39
AP_HAL_ChibiOS: when HAL_ENABLE_THREAD_STATISTICS is defined add ChibiOS thread stats to threads.txt
...
define HAL_ENABLE_THREAD_STATISTICS in hwdef.h
2020-12-30 18:15:05 +11:00
Andy Piper
a4b2930223
AP_HAL_ChibiOS: iFlight Beast H7 AIO hwdef
2020-12-30 18:13:03 +11:00
ukmook
bf34041211
AP_HAL_ChibiOS: add support for Pixracer-periph
2020-12-29 07:52:39 -07:00
Tom Pittenger
5432c9957a
AP_HAL_ChibiOS: rename AP_PERIPH_<feature>_DEFAULT to HAL_PERIPH_<feature>_DEFAULT
2020-12-28 09:16:02 +11:00
Tom Pittenger
083088bfff
AP_HAL_ChibiOS: adjust defaults to use param instead of hardcoded defaults
2020-12-25 16:24:50 -07:00
Ari Krupnik
79e1f5e8bd
AP_HAL_ChibiOS: standard spelling of variant
2020-12-25 00:01:50 +11:00
Phillip Kocmoud
062c6cef41
HAL_ChibiOS: Fix typo relating to pin PB7:I2C4_SDA
2020-12-23 06:43:19 +11:00
Siddharth Purohit
5b58163c35
AP_HAL_ChibiOS: add HAL_PERIPH_ENABLE_RCOUT_TRANSLATOR to CubeBlack-periph and CubeOrange-periph
2020-12-21 18:27:07 -08:00
Tom Pittenger
da74d755d0
AP_HAL_ChibiOS: add new HAL_PWM_COUNT define
2020-12-21 18:27:07 -08:00
Tom Pittenger
f670f7a9b6
AP_HAL_ChibiOS: change ADSB to use param ADSB_PORT instead of define
2020-12-17 23:24:04 -08:00
Tom Pittenger
5c98e18236
AP_HAL_CubeORange-periph: enable HAL_PERIPH_ALLOW_MAVLINK_UART_OR_USB_REBOOT_CMD on USB
2020-12-18 06:59:09 +11:00
Andrew Tridgell
b4201436dd
HAL_ChibiOS: fixed flash space on 16k bl boards
...
this avoids the stm32_flash_recent_erase() function which added around
800 bytes to the bootloader. It is not needed
2020-12-17 12:51:25 +11:00
Sebastian Witt
6cfaae4e7d
AP_HAL_ChibiOS: Support for Diatone MambaF405 MK2
2020-12-16 19:07:07 +11:00
Andrew Tridgell
bf546f363d
HAL_ChibiOS: don't init serial 1 and 3
...
these should not be treated as special. Initialising them early just
wastes memory if the end up not being used
2020-12-15 10:32:46 +11:00
Andrew Tridgell
e54fc4b0de
AP_HAL_ChibiOS: convert to using hal.serial() instead of hal.uartX
2020-12-15 10:32:46 +11:00
Phillip Kocmoud
ce87b62dcc
AP_Periph: Add alternate ordering of NCP5623 LED colors
2020-12-12 14:57:35 +11:00
Tom Pittenger
68b2982cc6
AP_HAL_ChibiOS: CubeBlack/Orange-periph to use default HAL_SUPPORT_RCOUT_SERIAL
2020-12-09 07:53:09 -08:00
Tom Pittenger
2203bf2400
AP_HAL_ChibiOS: Add f303-periph default RANGEFINDER_MAX_INSTANCES 1
2020-12-09 18:05:24 +11:00
Andrew Tridgell
0c440d5675
HAL_ChibiOS: cope with flash erase in expected delay
...
when there has been a flash erase when we are definately in an
expected delay
2020-12-08 13:22:36 +11:00
Andrew Tridgell
b4de6fb56a
HAL_ChibiOS: added new option DEFAULTGPIO for hwdef.dat
...
this allows ESD issues to be avoided by pulling all unused pins low
2020-12-08 11:21:57 +11:00
Andrew Tridgell
f44e4aaefb
HAL_ChibiOS: always set STM32_DMA_REQUIRED for non-bootloader
...
this fixes an issue for uart-only AP_Periph builds
2020-12-08 10:27:27 +11:00
Andrew Tridgell
b1e7b508db
HAL_ChibiOS: added HitecMosaic
2020-12-06 16:48:08 +11:00
Andrew Tridgell
1723cf8efb
HAL_ChibiOS: reduce SPI clock on MatekH743 mpu6k to 2MHz
...
this fixes regular transfer errors
2020-12-06 13:04:52 +11:00
Tom Pittenger
e235fd311e
AP_HAL_ChibiOS: fixed comment in script file
2020-12-03 20:33:51 +11:00
Andrew Tridgell
6765265a3b
AP_Periph: switched to 1kHz clock for f303-periph
...
and use CAN RX buffer size of 64.
This makes for more efficient CPU usage on f3, and fixes an issue with
lost CAN parameter replies causing timeouts in the CAN parameter
download protocol
2020-12-03 20:00:55 +11:00
Andrew Tridgell
b289701d20
HAL_ChibiOS: removed SPI devices on f103-periph
...
these are unused and saves us a couple of k of flash
2020-12-03 15:50:50 +11:00
Andy Piper
cf2602f91d
AP_HAL_ChibiOS: add support for @SYS/dma.txt for DMA contention
2020-12-02 18:17:23 +11:00
Phillip Kocmoud
38dd3b9209
hwdef: add mRo Control Zero Classic
2020-12-01 15:19:50 +11:00
Phillip Kocmoud
bef522387a
hwdef: add mRo Control Zero H7
2020-12-01 14:46:55 +11:00
Andrew Tridgell
cf22caa7ef
HAL_ChibiOS: raise stack limits in f303 peripherals
2020-12-01 11:14:50 +11:00
Andrew Tridgell
3ba46d5bd9
HAL_ChibiOS: enable reporting of watchdog reset on AP_Periph
2020-12-01 11:14:50 +11:00
Andrew Tridgell
ba69cd72c9
HAL_ChibiOS: improved stack checking and stack display
...
display both ISR stack and thread stacks. Show total stack sizes as
well as amount of stack remaining
2020-12-01 11:14:50 +11:00
Andrew Tridgell
84eac7642b
HAL_ChibiOS: improved stack checking
2020-12-01 11:14:50 +11:00
Andrew Tridgell
2d459dccc3
HAL_ChibiOS: reduced stack usage in CAN RX handler
2020-12-01 11:14:50 +11:00
Andrew Tridgell
c778d14fd3
HAL_ChibiOS: enable stack checking on f303 boards
2020-12-01 11:14:50 +11:00
Andrew Tridgell
573cd6db6d
HAL_ChibiOS: adjust MAIN_STACK for more ISR stack
...
we need more stack to deal with interrupt nesting between CAN, system
timer and serial interrupts
2020-12-01 11:14:50 +11:00
Andrew Tridgell
52a90e7a33
HAL_ChibiOS: fixed monitor thread with no logging
2020-12-01 11:14:50 +11:00
Andrew Tridgell
2a29b0fcf5
HAL_ChibiOS: fixed AP_Periph build with --enable-asserts
2020-12-01 11:14:50 +11:00
Andrew Tridgell
4d171ec19a
AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts
...
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Phillip Kocmoud
c9182b39d5
hwdef: mRo Control Zero H7 OEM - update and improve uniformity
2020-11-30 08:48:36 +11:00
Phillip Kocmoud
b55920165a
hwdef: mRo Pixracer Pro - update and improve uniformity
2020-11-30 08:48:36 +11:00
Phillip Kocmoud
a379bb8fc5
hwdef: mRo Control Zero F7 update and improve uniformity
2020-11-28 20:28:22 +11:00
Andrew Tridgell
a587195912
HAL_ChibiOS: change f303-MatekGPS to 5Hz by default
2020-11-27 19:41:33 +11:00
Tom Pittenger
67405cedb2
AP_HAL_ChibiOS: add AP_BattMonitor support to CubeBlack&Orange-periph
2020-11-25 14:20:53 +11:00
斯东Stone
4990048efb
HAL_ChibiOS: Correct a typo and Update product link url for PH4-mini
2020-11-24 12:48:11 +11:00
QioTek
e4f4868d9b
HAL_ChibiOS: add QMC5883L on QioTekZealotF427
...
add QMC5883L on QioTekZealotF427
2020-11-22 06:10:34 +11:00
Marek Łukasiewicz
64f208cbec
HAL_ChibiOS: Add af_parse for CubeMX pinout csv
2020-11-18 18:39:07 +11:00
Phillip Kocmoud
701ab83f01
HAL_ChibiOS: Added support for mRo ControlZero OEM H7 flight controller
2020-11-18 18:28:24 +11:00
Andrew Tridgell
408f8b3940
HAL_ChibiOS: added check for overwrite of nullptr on H7
...
the STM32H7 has 64k of ITCM memory at address zero. We allow
allocation of everything except the first 1024 bytes. This checks for
those reserved bytes being overwritte, which would indicate a write to
nullptr
2020-11-18 17:14:43 +11:00
Andrew Tridgell
8f682c0782
HAL_ChibiOS: check all memory at 10Hz
2020-11-18 17:14:43 +11:00
Andrew Tridgell
95a823a702
HAL_ChibiOS: added link list of all memory allocations
...
check all allocations for corruption on free() and malloc_check()
2020-11-18 17:14:43 +11:00
Andrew Tridgell
3f775205e6
HAL_ChibiOS: fixed use of chHeapFree
...
should be free
2020-11-18 17:14:43 +11:00
Andrew Tridgell
ce3e1a69ec
HAL_ChibiOS: added memory guard system
2020-11-18 17:14:43 +11:00
Huibean
cf2b89c4f1
AP_HAL_ChibiOS:add mazzy star drone hwdef
2020-11-17 17:57:07 +11:00
Tom Pittenger
e0e3c23a87
AP_HAL_ChibiOS/hwdef: fix misprint in comment
2020-11-14 08:00:40 +11:00
Marek Łukasiewicz
8813057b4c
AP_HAL_ChibiOS: Tweak sorting to be py2/py3 compatible
2020-11-12 10:27:31 +11:00
Andrew Tridgell
280e9d1c41
HAL_ChibiOS: fixed bootloader build
2020-11-10 16:15:45 +11:00
Andrew Tridgell
17b4198921
HAL_ChibiOS: add WITH_FATFS to environment
2020-11-10 16:15:45 +11:00
Andrew Tridgell
ac566763fe
HAL_ChibiOS: disable loop delay on replay
2020-11-10 16:15:45 +11:00
Andrew Tridgell
bb3b59966f
HAL_ChibiOS: define INS_MAX_INSTANCES if less than 3
...
save some flash and memory
2020-11-10 16:15:45 +11:00
Andrew Tridgell
cb034c50a7
HAL_ChibiOS: fixed orientation of compass on M10070B
2020-11-08 16:13:17 +11:00
Andrew Tridgell
3b7b2b89a5
HAL_ChibiOS: added baro for mRo Location-one GPS
2020-11-08 16:13:17 +11:00
Phillip Kocmoud
c192efea0a
hwdef:PixracerPro - Fix analog volt pin assignments
2020-11-03 08:17:54 +11:00
Andrew Tridgell
46976c4358
HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG
...
when a peripheral is made available via BRD_ALT_CONFIG we need to
remap the existing ioline_t in the UART and I2C drivers to use the new
pin.
This fixes an issue with half-duplex, inverted, swapped UART pins for
protocols like FPort and FPort2
2020-10-28 19:51:45 +11:00
Andrew Tridgell
ee50eaf3c9
HAL_ChibiOS: go via AP_Filesystem for mount/unmount operations
...
this fixes a deadlock where a mount/unmount could access FATFS without
holding the AP_Filesystem semaphore
2020-10-27 10:45:03 +11:00
Andrew Tridgell
96f7397099
HAL_ChibiOS: make PowerC primary power on CUAV-X7
...
CUAV considers the CAN power to be the main power for this board
2020-10-24 08:27:21 +11:00
Michael Oborne
b383db15c7
ChibiOS: fix cubeblack+ name and usbid
2020-10-24 08:26:55 +11:00
Andrew Tridgell
fb1dcdb059
HAL_ChibiOS: added BL suffix to bootloader USB IDs for two boards
...
our convention is to have -BL on end of USB product IDs in bootloaders
2020-10-13 17:59:13 +11:00
Andrew Tridgell
418bd33c43
HAL_ChibiOS: fix CUAV-X7 power bits
2020-10-13 17:58:30 +11:00
Andrew Tridgell
25bc128248
HAL_ChibiOS: fixed periph overpower ifdef
...
fixes overcurrent logging on several boards
2020-10-13 17:58:30 +11:00
Andrew Tridgell
989f8c5d41
HAL_ChibiOS: fixed a race condition in UART DMA transmit
...
this fixes an issue seen on one board which caused a watchdog on high
uart DMA load. We have reproduced the issue on another board by
forcing a very high DMA transfer rate on the same DMA channel while
also requesting very high transfer rates on the UART. The likely race
is in the DMA transmit timeout code, and the simplest fix is to lock
out interrupts during the DMA setup to ensure the tx timeout cannot
trigger during the setup
2020-10-12 13:25:48 +11:00
bugobliterator
5880628b01
hwdef: add support for CubeBlack-periph
2020-10-08 09:31:35 +11:00
bugobliterator
e16cab0437
AP_HAL_ChibiOS: ensure we timeout while checking FDCAN register sets
2020-10-08 09:31:35 +11:00
bugobliterator
ca957519dc
AP_HAL_ChibiOS: redo filter configuration to make it work with STM32H7
2020-10-08 09:31:35 +11:00
QioTek
f04de7d610
HAL_ChibiOS: Add QioTekZealotF427 build target
...
I've added the hwdef to support the QioTekZealotF427
It has 3 IMU sensors(ICM20698,ICM20602,BMI055), a Compass(Ist8310),
2Baro sensors(DSP310,MS5611), an integrated analog OSD, 14motor
outputs, 4Relay output, 5uarts, 2Power Module input, an i2c, a Can.
2020-10-05 07:41:06 +11:00
Andrew Tridgell
702a3926f8
HAL_ChibiOS: setup defines for more flow control pins
...
allow all uarts to have flow control
2020-10-03 20:22:56 +10:00
Andrew Tridgell
5e80b10396
HAL_ChibiOS: enable telem3 on Durandal
...
the RCIN issue is not there in the final production boards
2020-10-03 20:22:56 +10:00
Andrew Tridgell
e471b23f58
HAL_ChibiOS: add a max quota of GPIO interrupts
...
This implements a max quota of GPIO interrupts per 100ms period to
prevent high interrupt counts from consuming all CPU and causing a
lockup. The limit is set as 10k interrupts per 0.1s period. That limit
should be high enough for all reasonable uses of GPIO interrupt
handlers while being below the level that causes significant CPU loads
and flight issues
This addresses issue #15384
2020-10-02 09:38:24 +10:00
bugobliterator
0a4ea250ad
AP_HAL_ChibiOS: disable CANFilter on H7 boards temporarily
2020-10-01 07:19:19 +10:00
Andrew Tridgell
4b747430e1
HAL_ChibiOS: save 2k in f103 bootloader
...
don't include serial bl support if dev list is empty
2020-09-24 12:32:19 +10:00
Siddharth Purohit
6fb973081b
AP_HAL_ChibiOS: enable all I2C compasses by default for f103 boards
2020-09-24 12:32:19 +10:00
Andrew Tridgell
0e8c8c29a8
HAL_ChibiOS: fixed f303-MatekGPS build
2020-09-24 12:32:19 +10:00
Andrew Tridgell
246e790484
AP_Bootloader: use new hal CAN interface for CAN support
2020-09-24 12:32:19 +10:00
Siddharth Purohit
a79efaeb1d
AP_HAL_ChibiOS: hwdef: add support for HAL CANIface based bootloader
2020-09-24 12:32:19 +10:00
Siddharth Purohit
882c86c394
AP_HAL_ChibiOS: add app start offset to leave space for params
2020-09-24 12:32:19 +10:00
Siddharth Purohit
1f16aa8360
HAL_ChibiOS: add hwdef for CubeOrange-periph
2020-09-24 12:32:19 +10:00
Siddharth Purohit
62df67a4b8
HAL_ChibiOS: hwdef: modify to use HAL CAN driver instead of ChibiOS's
2020-09-24 12:32:19 +10:00
Siddharth Purohit
36ffcdae30
HAL_ChibiOS: modify hal can drivers for use by AP_Periph
2020-09-24 12:32:19 +10:00
Hwurzburg
d5722b15e9
AP_ChibiOS: fix configuration number in OmnibusF7V2 hwdef
2020-09-23 07:35:22 +10:00
Hwurzburg
de8002ab5e
AP_HAL_ChbiOS: ALT config to enable UART3 in place of I2C
2020-09-22 09:48:02 +10:00
Andrew Tridgell
0ba256f625
HAL_ChibiOS: fixed warning on gcc9
...
packed structure can be misaligned
2020-09-22 08:07:23 +10:00
Andrew Tridgell
90cd2a38b6
HAL_ChibiOS: fixed gcc9 warnings
2020-09-22 08:07:23 +10:00
Hwurzburg
c64f286333
AP_ChibOS: add UART7_RX to OMNIBUSF7V2
2020-09-17 10:47:18 +10:00
bugobliterator
575a56a6b6
hwdef: CubeOrange: do power reset on peripherals and sensor at boot
2020-09-16 18:08:08 +10:00
bugobliterator
a2ee82d8d9
hwdef: use inv2 sensor checks in CubeOrange
2020-09-16 18:08:08 +10:00
Andy Piper
570fd59c39
AP_HAL_ChibiOS: disable OSD parameters on F7 1Mb boards with SD cards
2020-09-10 18:10:32 +10:00
Andrew Tridgell
1ffbbb2896
HAL_ChibiOS: added FLASH_TOTAL to environment
2020-09-10 07:41:25 +10:00
Andy Piper
bbaaf7d66f
AP_HAL_ChibiOS: disable features on KakuteF7 and OmnibusF7v2 to mirror KakuteF7Mini
2020-09-09 20:36:42 +10:00
Andrew Tridgell
90e488d29d
HAL_ChibiOS: set airspeed type in f303-MatekGPS fw
2020-09-09 12:04:49 +10:00
Andrew Tridgell
e95a44e73c
HAL_ChibiOS: run f303-MatekGPS at 10Hz
2020-09-09 06:35:50 +10:00
Andrew Tridgell
844db20db0
HAL_ChibiOS: use a default node ID for f303-MatekGPS
2020-09-09 06:35:50 +10:00
Andrew Tridgell
9c7568eb5f
HAL_ChibiOS: enable MSP output for f303-MatekGPS
2020-09-09 06:35:50 +10:00
chobits
f4320c935c
AP_HAL_ChibiOS: fix kakutef7/mini motor glitch when using dshot
2020-09-08 18:57:30 +10:00
vierfuffzig
63fdac0048
AP_HAL_ChibiOS: add USART3 as alt config on OmnibusNanoV6
2020-09-07 15:34:01 +10:00
Michael Oborne
4e9848ab3a
HAL_ChibiOS: fix sdcard param init
...
the write was failing because of a 0 byte write attempt, the response was -1 vs 0
this results in not using the sdcard backend for storage for all boots after the initial
2020-09-04 07:13:12 +10:00
Andrew Tridgell
3a252a042b
HAL_ChibiOS: fixed fast sampling on F32Lightning
...
this SPI bus on this board can't handle 8MHz
2020-09-02 06:42:44 +10:00
Andrew Tridgell
491e82159c
HAL_ChibiOS: add HAL_WITH_SPI_xx defines for SPI devices
...
this allows us to avoid building drivers for SPI devices we don't
have, such as OSD
2020-09-02 05:56:46 +10:00
Siddharth Purohit
d25908a1c9
AP_HAL_ChibiOS: keep a backup of storage for last 100 boots
2020-09-01 14:31:53 +10:00
vierfuffzig
56e44c46ca
AP_HAL_ChibiOS: disable IMU fast sampling on F35 / WingFC10
...
fast sampling introduces random IMU glitches, bisect search identifies 9c2caf5b12
disabling fast sampling fixes IMU back to expected behaviour. see:
https://github.com/ArduPilot/ardupilot/issues/15090
https://discuss.ardupilot.org/t/shaking-horizon-and-jittering-servos/60420
for reference
2020-08-31 19:50:09 +10:00
Andrew Tridgell
36442dc9b0
HAL_ChibiOS: added Matek CAN GPS
...
supports GPS, baro, mag and airspeed
2020-08-25 09:59:15 +10:00
Andrew Tridgell
4c4c3d467b
HAL_ChibiOS: added f103-Airspeed sensor
...
for Matek CAN airspeed sensor
2020-08-25 09:59:15 +10:00
bugobliterator
5eb0e0a718
AP_HAL_ChibiOS: fix name for RX Queue size define
2020-08-24 06:48:56 +10:00
Siddharth Purohit
8dcb973dad
HAL_ChibiOS: fix SWD config in f3 boards
2020-08-20 19:08:14 +10:00
Siddharth Purohit
7929efec0d
HAL_ChibiOS: add EventSource HAL
2020-08-19 17:31:09 +10:00
Siddharth Purohit
265e9b8cc6
HAL_ChibiOS: add native time info methods
2020-08-19 17:31:09 +10:00
Siddharth Purohit
a7d641c705
AP_HAL_ChibiOS: add available method for locked state
2020-08-19 17:31:09 +10:00
Siddharth Purohit
cdf8e369f1
AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver
...
HAL_ChibiOS
2020-08-19 17:31:09 +10:00
Siddharth Purohit
697e4141cb
AP_HAL: add common Event interface
2020-08-19 17:31:09 +10:00
Siddharth Purohit
3ddd1d484a
AP_HAL_ChibiOS: add support for bank selection call outside SPI driver
2020-08-06 12:41:35 +10:00
Andy Piper
baf92a17f9
AP_HAL_ChibiOS: disable AP_Mount on "mini" boards
2020-08-04 09:18:14 +10:00
Peter Barker
b5d0480bed
AP_HAL_ChibiOS: log accumulated power status flags; all flags ever set
2020-07-21 09:12:14 +10:00
Andrew Tridgell
d283dd7d00
HAL_ChibiOS: define polarity of 3.3/5v selection for PWM
2020-07-21 08:47:27 +10:00
Andrew Tridgell
99ac8e2fbe
HAL_ChibiOS: enable BRD_PWM_VOLT_SEL parameter for mRoPixracerPro
2020-07-21 08:47:27 +10:00
Peter Barker
efb576292f
AP_HAL_ChibiOS: handle queue push and pop failing
2020-07-20 10:19:47 +09:00
Henry Wurzburg
d78c5371db
AP_HAL_ChibiOS: remove fmuv4 and update Pixracer
2020-07-13 15:24:54 +10:00
Andrew Tridgell
9f1e641637
HAL_ChibiOS: added new STM32Cube configs
2020-07-10 13:33:51 +10:00
Andrew Tridgell
84bd59a7bb
HAL_ChibiOS: support H7 with no crystal
2020-07-10 13:33:51 +10:00
Andrew Tridgell
cfbfb27004
HAL_ChibiOS: support no-crystal F3 setups
2020-07-10 13:33:51 +10:00
Andy Piper
2bae080be4
AP_HAL_ChibiOS: increase RCIN stack size
2020-07-07 18:48:06 +10:00
Peter Barker
cadb1012df
AP_HAL_ChibiOS: reenable full features on KakuteF7Mini
2020-07-02 18:38:46 +10:00
Andrew Tridgell
ce8591ddbc
HAL_ChibiOS: re-enable full features on KakuteF7 and OMNIBUSF7V2
...
we now have enough space with recent changes for these boards
2020-07-02 18:38:46 +10:00
Andy Piper
c707303336
AP_HAL_ChibiOS: hold buzzer ping low in bootloader for omnibusf4pro
2020-06-30 17:58:35 +10:00
Andy Piper
48e0da8444
AP_HAL_ChibiOS: pull buzzer pin low in Kakute F7 bootloader to prevent startup scream
2020-06-30 17:58:35 +10:00
Andrew Tridgell
20b2396646
HAL_ChibiOS: fixed bug in undef of pins
...
revert pin to initial state on undef
2020-06-30 14:28:30 +10:00
Randy Mackay
f9a866d09a
AP_HAL_ChibiOS: luminousbee4 serial5 to mavlink2
2020-06-30 09:42:49 +10:00
Randy Mackay
3e0bb4110a
AP_HAL_ChibiOS: fmuv4 serial5 to mavlink2
2020-06-30 09:42:49 +10:00
Randy Mackay
ced448b706
AP_HAL_ChibiOS: DrotekP3Pro serial5 to mavlink2
2020-06-30 09:42:49 +10:00
MATEKSYS
903b44da7d
HAL_ChibiOS: Add DPS310 for MatekF405-WING,F765-WING and H743
2020-06-22 19:35:01 +10:00
Andrew Tridgell
7f429302ed
HAL_ChibiOS: increase monitor thread stack to 768 bytes
...
attempt to fix issue #14582
2020-06-15 17:56:34 +10:00
Andrew Tridgell
6fa623d074
HAL_ChibiOS: added Holybro Pix32v5
2020-06-12 21:23:16 +10:00
MATEKSYS
14e01e21b7
HAL_ChibiOS: MatekH743: move baro to I2C2 bus
2020-06-11 17:31:59 +10:00
Andrew Tridgell
c1403a2e2b
HAL_ChibiOS: fixed default CubeOrange pin for 2nd current sensor
2020-06-10 17:32:11 +10:00
Andrew Tridgell
6a1f43d5df
HAL_ChibiOS: fixed build with our old compiler
...
gcc 4.9 doesn't like static_assert() in C code
2020-06-07 14:11:48 +10:00
duccan
cdcdd5ce27
AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
...
Rework after review:
- Kept old IMU and barometer definition of crazyflie 2.0 in hwdef
- Added comment regarding soft-reset command
- Added defaults.parm for crazyflie
2020-06-07 07:49:37 +10:00
duccan
0d96c7f7a5
AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
2020-06-07 07:49:37 +10:00
James Jacobsson
8a87322d93
AP_HAL_Chibios: Adjust MatekF765-Wing voltage and current scales
...
The new values matches the ones from here:
http://www.mateksys.com/?portfolio=f765-wing#tab-id-5
Also verified to be a lot more accurate in real life.
2020-06-04 10:06:22 +10:00