Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
19,947 Commits 71 Branches 509 Tags 778 MiB
Commit Graph

616 Commits

Author SHA1 Message Date
Gustavo Jose de Sousa c340e072f2 AP_InertialSensor: use accel instance max abs offset instead of a constant value 
The calibration on LSM9DS0 was giving offsets between 4.0 and 4.2 on x-axis and
around 3.6 on y-axis. It turned out that those offsets were actually right.

The maximum absolute values of calibration offset should be a sensor
characteristic rather than a constant value for all sensors.

The constant value previously used (3.5 m/s/s for all axes) is set here as a
default maximum absolute calibration offset for every instance to keep it
working.
 2015-06-30 10:27:44 +10:00
Gustavo Jose de Sousa c72dc9bd45 AP_InertialSensor: make single rotation on MPU9250 
The previous implementation made some boards apply two rotations to suit
their default orientation. That was happening because there was an
unconditional rotation being done (commented as "rotate for bbone
default").

This commit makes that unconditional rotation as a default rotation
instead and adjusts the former additional rotations to be single
rotations.
 2015-06-22 17:45:20 +10:00
Gustavo Jose de Sousa 3dad768e8b AP_InertialSensor: log failure to initialize after max attempts on MPU9250 
This happens for example when you are trying to use an SPI speed that's
above the one supported by the sensor or the controller.
 2015-06-22 17:45:20 +10:00
Gustavo Jose de Sousa 587471ab54 AP_InertialSensor: disable I2C on MPU9250 
As the datasheet says: "To prevent switching into I2C mode when using
SPI, the I2C interface should be disabled by setting the I2C_IF_DIS
configuration bit."

We also reset the sensor like PX4Firmware does for initializing the
MPU6000.  See: ee1d8cd770/src/drivers/mpu6000/mpu6000.cpp (L695)
 2015-06-22 17:45:20 +10:00
Andrew Tridgell 4eab27abe9 AP_InertialSensor: fixed logic bug in MPU6000 init 
thanks to coverity
 2015-06-20 14:53:04 +10:00
mirkix 588a16dec2 AP_InertialSensor: Add Linux support for VibTest example 2015-06-18 08:48:23 +10:00
Andrew Tridgell 4fe092fead AP_InertialSensor: panic on bad gyro or accel sample rates 2015-06-17 15:01:23 +10:00
Andrew Tridgell d3b85eb792 AP_InertialSensor: use driver supplied sample rate 
this will work with a wider range of sensors
 2015-06-17 14:44:19 +10:00
Andrew Tridgell e91bfdfc1c AP_InertialSensor: fixed VibTest example build 2015-06-17 14:15:58 +10:00
Andrew Tridgell bc0ae630a1 AP_InertialSensor: always provide delta_velocity and delta_angles 
this makes the NavEKF code simpler
 2015-06-17 13:10:26 +10:00
Andrew Tridgell f831c16238 AP_InertialSensor: use fixed sensor sample times 
this uses fixed sample times for PX4 IMUs, rather than reported
timestamps. It avoids timing jitter caused by the over-sampling in
the PX4 drivers
 2015-06-17 13:03:56 +10:00
Randy Mackay 9d81856580 InertialSensor: fix name of get_delta_velocity method 2015-06-17 12:46:54 +10:00
Andrew Tridgell 727be87d84 AP_InertialSensor: support HIL functions for delta_velocity and delta_angles 2015-06-16 09:53:55 +10:00
Randy Mackay 8ceccd778d InertialSensor: disable vibration checks on APM2 
Also bug fix get_accel_clip_count's instance check
 2015-06-12 21:36:56 +09:00
Randy Mackay 0db7acc628 InertialSensor: calc vibration and accel clipping 2015-06-12 21:36:22 +09:00
Andrew Tridgell 214b61bfc0 AP_InertialSensor: fixed example build 2015-06-01 17:35:15 +10:00
Andrew Tridgell 7f7113c1de AP_InertialSensor: convert example from .pde to .cpp 2015-06-01 17:07:04 +10:00
Andrew Tridgell 6a2c585632 AP_InertialSensor: fixed build warnings 2015-05-30 22:51:19 +10:00
Peter Barker 8be9e99fad AP_InertialSensor_PX4: 64-bit timestamps for ACCx and GYRx messages 2015-05-27 11:54:17 +10:00
Peter Barker f489f6b696 AP_InertialSensor: use 64-bit timestamps in dataflash logs 2015-05-27 11:54:17 +10:00
Lucas De Marchi 3aa46e3213 AP_InertialSensor: use functor macros 
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
 2015-05-26 13:46:53 +10:00
Andrew Tridgell aaa35bd1ec AP_InertialSensor: using atan2f() gives more accurate euler corrections 
thanks to Jon and Paul!
 2015-05-16 08:19:18 +10:00
Andrew Tridgell 9e723ef907 AP_InertialSensor: added calibrate_trim() function 
used for redoing trim calculation
 2015-05-16 07:56:34 +10:00
Andrew Tridgell b564ba0868 AP_InertialSensor: fixed AHRS_TRIM calculation again 2015-05-16 07:56:33 +10:00
Jonathan Challinger 159599879f AP_InertialSensor: simplify and correct AHRS_TRIM computation 2015-05-15 21:03:03 +10:00
Randy Mackay 3f8b832075 InertialSensor: fix example sketch 2015-05-13 10:13:51 +09:00
Randy Mackay 1f14eec4ea InertialSensor: accel_calibrated_all_ok replaces calibrated 
This checks that the current number of accelerometers matches the number
of calibrated accels in order to catch accel failures at boot
 2015-05-12 16:32:16 +09:00
Andrew Tridgell 8bf2baef70 AP_InertialSensor: fixed primary accel/gyro in replay 2015-05-11 11:19:11 +10:00
Andrew Tridgell afc9812d0b AP_InertialSensor: update VibTest after moving messages info DataFlash 2015-05-07 13:25:37 +10:00
Andrew Tridgell 7d90033a36 AP_InertialSensor: support raw accel and gyro dataflash logging 2015-05-07 12:08:30 +10:00
Andrew Tridgell f5140e25b0 AP_InertialSensor: updated VibTest for latest PX4 interfaces 2015-05-07 10:51:52 +10:00
Andrew Tridgell 089e63f987 AP_InertialSensor: fixed PSTR handling 
must use PSTR on code compiled for AVR
 2015-05-05 13:54:00 +10:00
Andrew Tridgell 31693e332e AP_InertialSensor: use non-PSTR printf 
this is not built on AVR
 2015-05-05 13:48:34 +10:00
Andrew Tridgell e6a8a6da07 AP_InertialSensor: revert AP_Math class change 2015-05-05 13:27:06 +10:00
Tom Pittenger 0e076d6dc8 AP_InertialSensor: compile warnings: format not a string literal, argument types not checked 
PSTR() goofs things up when using hal.console->printf_P()
 2015-05-05 13:27:02 +10:00
Tom Pittenger 9e98c68099 AP_InertialSensor: compile warnings: format not a string literal, argument types not checked 
PSTR() goofs things up when using hal.console->printf_P()
 2015-05-05 13:27:01 +10:00
Tom Pittenger 820199635b AP_InertialSensors: compiler warnings: apply is_zero(float) or is_equal(float) 2015-05-05 13:26:51 +10:00
Tom Pittenger 3cb2221315 AP_IntertialSensor: double to float warning 2015-05-05 13:26:50 +10:00
Andrew Tridgell ef527d9daa AP_InertialSensor: fix for HAL_SITL rename 2015-05-05 09:45:55 +10:00
Randy Mackay 6773c0b232 AP_InertialSensor: default primary accel and gyro 2015-05-01 16:37:33 +09:00
Jonathan Challinger bb88a4f8fe AP_InertialSensor: healthy() checks bounds 2015-05-01 16:37:15 +09:00
Jonathan Challinger af80f20a51 AP_InertialSensor: add get_primary_gyro, fix get_primary_accel 2015-05-01 16:37:14 +09:00
Andrew Tridgell 007b01533d AP_InertialSensor: switched to 16g accel range for MPU9250 
this matches the Pixhawk, and makes us less prone to vibration. We
have seen clipping at 8g
 2015-04-28 15:30:29 +10:00
Tom Pittenger a4b8575432 InertialSensor: fix compile warnings re float constants 2015-04-24 14:03:49 +09:00
mirkix 13ee34c58a AP_InertialSensor: MPU9150 fix compiler warnings 2015-04-14 11:14:48 +10:00
Lucas De Marchi b292873304 AP_InertialSensor: fix starvation in L3G4200D 
The main thread would always be blocked on the semaphore to read the
data from accelerometer and gyroscope. Especially if we have a slow
update of these values in _accumulate() due to the I2C transfer function
taking too much time: the timer thread would never give up the CPU,
causing starvation on the main thread.

This fixes the issue by reducing the critical region using a flip-buffer
so _accumulate() can work on its own copy of the data. Now that the
critical region is smaller, also avoid the semaphore and use a spinlock
instead.
 2015-04-14 10:01:47 +10:00
Andrew Tridgell 45e016ea5b AP_InertialSensor: check for zero delta_velocity dt 2015-04-03 15:10:47 -07:00
Jonathan Challinger b306d7a356 AP_InertialSensor: accel cal sample for 400ms instead of 1s 2015-04-03 14:54:19 -07:00
Jonathan Challinger 1e1d8efa22 AP_InertialSensor: use expected update rate for accel cal sampling 2015-04-03 14:54:17 -07:00
Jonathan Challinger bd84328440 AP_InertialSensor: hack to "reset" the accel filter before taking a cal sample 2015-04-03 14:54:15 -07:00
Jonathan Challinger b2b42e081a AP_InertialSensor: use delta_velocity/dt for calibration if available 2015-04-03 14:54:10 -07:00
Jonathan Challinger 423160eaf8 AP_InertialSensor: publish delta_velocity_dt 2015-04-03 14:54:06 -07:00
Andrew Tridgell 4147825b87 AP_InertialSensor: fixed gyro calibration bug 
we must not update _gyro_offset[] until we have completed calibration
of that gyro, or we will end up using the new offsets when asking for
the raw gyro vector
 2015-04-03 06:57:30 -07:00
Andrew Tridgell 23272e4013 AP_InertialSensor: added get_temperature() interface 
this will allow logging of individual temperature sensors
 2015-03-17 13:32:54 +11:00
ahcorde 103bb2a08d AP_InertialSensor: Fix orientation MPU6000 PXF 2015-03-16 09:50:51 +11:00
Andrew Tridgell cf2445dc97 AP_InertialSensor: prevent nested accelerometer calibration 2015-03-15 15:22:59 +11:00
Andrew Tridgell 8a99cab535 AP_InertialSensor: load only HIL backend for hil_mode 2015-03-13 22:52:55 +11:00
Andrew Tridgell 520c7c1306 AP_InertialSensor: always allow for AK8963 on MPU9250 2015-03-13 18:46:17 +11:00
Andrew Tridgell 60b8736cf1 AP_InertialSensor: use right AK8963 compass defines 2015-03-13 18:46:15 +11:00
Andrew Tridgell 808c33d0a7 AP_InertialSensor: support both MPU9250 and MPU9255 
seems to be just different WHOAMI register
 2015-03-13 13:26:49 +11:00
Andrew Tridgell 07fd31c724 AP_InertialSensor: change copter filters to 20Hz 
with the backend filters disabled 20Hz is closer to the old default of
30Hz
 2015-03-12 13:11:17 +11:00
Andrew Tridgell a1d43e39e0 AP_InertialSensor: added get_gyro_filter_hz() and get_accel_filter_hz() 2015-03-12 12:50:31 +11:00
Andrew Tridgell 3d7d46b9b0 AP_InertialSensor: replaced INS_MPU6K_FILTER with INS_ACCEL_FILTER and INS_GYRO_FILTER 
this allows filtering to be set separately on accels and gyros where possible
 2015-03-12 12:50:31 +11:00
Andrew Tridgell f3314791f2 AP_InertialSensor: removed INS_CALSENSFRAME 
it is no longer needed as we have shifted the accel cal indexes
 2015-03-12 12:50:31 +11:00
Andrew Tridgell 4bc6c8e655 AP_InertialSensor: shift to new parameter indexes for accel calibration 
this allows for users to switch between development trees and previous
stable versions while retaining their accel calibration values.
 2015-03-12 12:50:30 +11:00
Andrew Tridgell 5d0eb49114 AP_InertialSensor: calculate queue depth based on requested sample rate 
this auto-scales the queue depth for plane, rover and copter
 2015-03-12 12:50:30 +11:00
Andrew Tridgell ea49d1cd39 AP_InertialSensor: removed unused variable 2015-03-12 12:50:30 +11:00
Andrew Tridgell e6a4b9f68c AP_InertialSensor: check accel health during accel cal 2015-03-12 12:50:29 +11:00
Andrew Tridgell 875339f12a AP_InertialSensor: try to avoid a compiler fault in travis 2015-03-12 12:50:29 +11:00
Andrew Tridgell 786172aa4e AP_InertialSensor: removed 1D accel calibration 
it is finally time to move on from this. We want to push people
towards better calibration and removing the 1D accel cal is the first
step
 2015-03-12 12:50:28 +11:00
Andrew Tridgell a975520033 AP_InertialSensor: check range of accels in 3D calibration 
during 3D accel cal it is possible to get data which passes the sphere
fit but which has very poor coverage and does not provide sufficient
data for a good result. This checks that each axis covers a range of
at least 12 m/s/s in body frame
 2015-03-12 12:50:28 +11:00
Andrew Tridgell a8a8628515 AP_InertialSensor: added INS_CALSENSFRAME parameter 
this allows us to detect if accel calibration was done in sensor frame
or not. If it was done in sensor frame then the accel calibration is
independent of AHRS_ORIENTATION, which makes it easier to move a board
to a new airframe without having to recalibrate.
 2015-03-12 12:50:28 +11:00
Jonathan Challinger bc655ff0cc AP_InertialSensor_PX4: add optional debug 2015-03-12 12:50:28 +11:00
Jonathan Challinger 074ee49cd0 AP_InertialSensor_PX4: interleave accel and gyro samples by time 2015-03-12 12:50:28 +11:00
Jonathan Challinger addf80b669 AP_InertialSensor_PX4: explicitly configure sensors, publish deltas 2015-03-12 12:50:27 +11:00
Jonathan Challinger b5131b7b64 AP_InertialSensor: add coning.py example 2015-03-12 12:50:27 +11:00
Jonathan Challinger 2a547f329b AP_InertialSensor: allow backends to publish delta velocities and angles 2015-03-12 12:50:27 +11:00
Jonathan Challinger 155c173ed1 AP_InertialSensor: rename _rotate_and_offset to _publish 2015-03-12 12:50:27 +11:00
Jonathan Challinger 502446d821 AP_InertialSensor: use LowPassFilter2pVector3f 2015-03-12 12:50:27 +11:00
Randy Mackay 5f26a36060 INS: protect against two calibrations running at the same time 2015-03-09 17:58:38 +11:00
Randy Mackay f9c6e35d19 INS: add calibrating method 2015-03-09 17:58:38 +11:00
Randy Mackay b0e7990c90 INS: set gyro_cal_ok only after completing calibration 2015-03-09 17:58:37 +11:00
Andrew Tridgell aec7907571 AP_InertialSensor: updated comment on accel check in gyro cal 2015-03-09 17:58:36 +11:00
Andrew Tridgell 494e909703 AP_InertialSensor: ensure accel cal completion messages get through 2015-03-09 07:36:50 +11:00
Andrew Tridgell 38bde56523 AP_InertialSensor: continue finding best gyro after convergence 
with multiple gyros if we are still calibrating one of the gyros then
keep looking for better values for the already converged gyros.
 2015-03-08 07:49:38 +11:00
Andrew Tridgell 20a4c98bac AP_InertialSensor: use accelerometers to prevent bad gyro cal 
if the board is rotating at a steady rate we can end up with a bad
gyro calibration. This can happen on a steadily moving platform such
as a ship.

This uses the accelerometers to detect the steady movement and not
accept the gyro calibration
 2015-03-08 07:48:16 +11:00
Andrew Tridgell 434d094993 AP_InertialSensor: allow MAVLink packets to flow during accelcal 
this uses the snoop functionality of GCS_MAVLink to allow the delay
callback to be used during accel calibration
 2015-03-07 21:56:39 +11:00
Randy Mackay b650d39786 InertialSensor: remove product_id set to zero 2015-02-21 09:14:33 +09:00
Andrew Tridgell 9b2d44d6ed AP_InertialSensor: use delay_microseconds_boost() 
this gives much more consistent timing for PX4
 2015-02-16 12:19:13 +11:00
Andrew Tridgell f54d799bff AP_InertialSensor: added TIMING_DEBUG code for finding loop timing issues 2015-02-16 10:12:10 +11:00
Andrew Tridgell 04bef5ccf3 AP_InertialSensor: don't skip delay if we are a bit early 
this produces a bit more even timing
 2015-02-14 12:25:44 +11:00
Andrew Tridgell 4537acb898 AP_InertialSensor: change for new PX4 device paths 2015-02-14 12:25:43 +11:00
mirkix 460b434708 AP_InertialSensor: add apm1 oilpan support 2015-02-11 18:22:44 +11:00
Grant Morphett b511410b48 AP_InertialSensor: Changes to fix the warnings in rover sitl build. 
We are starting the process of resolving all the warnings in the
ardupilot builds of all vehicles and platforms.
 2015-02-11 18:16:45 +11:00
Emile Castelnuovo dae32984f1 AP_InertialSensor: use PX4 library for VRBRAIN boards. 2015-02-02 08:43:59 +11:00
Emile Castelnuovo 731329fc55 AP_InertialSensor: correction to AP_InertialSensor_VRBRAIN 2015-02-02 08:43:58 +11:00
LukeMike 6a93148b92 AP_InertialSensor: added library for VRBRAIN Inertial Sensor 2015-02-02 08:43:58 +11:00
Andrew Tridgell 6e62e1ca7b AP_InertialSensor: make calibrated() const 2015-02-01 14:13:54 +11:00
Randy Mackay b43dc3bdfb INS: fix example sketch 2015-01-28 17:15:42 +09:00
Andrew Tridgell 8b59c72eb9 AP_InertialSensor: cope with 2 IMUs in SITL 2015-01-20 19:47:45 +11:00
Andrew Tridgell b3ce56d34d AP_InertialSensor: fixed 2nd IMU in Replay 
this makes for much more accurate replay runs
 2015-01-20 09:20:47 +11:00
mirkix fa950a735e AP_InertialSensor: add support for BBBMINI, simple ArduPilot DIY Cape for the BeagleBone Black 2015-01-12 21:36:40 +13:00
Andrew Tridgell 1b3c3c754d AP_InertialSensor: use correct ifdef for AK8963 2015-01-07 11:58:05 +11:00
Staroselskii Georgii f7f9cd2173 AP_InertialSensor: prevented MPU9250 from disabling I2C slaves 2015-01-07 08:41:13 +11:00
Andrew Tridgell 745b739ab7 AP_InertialSensor: make calibrated() function fast enough to call in flight 
this will be used in plane to make AHRS SYS_STATUS unhealthy if a user
tries to fly with EKF enabled without a full 3D accel cal.

Note that it doesn't rely on using AP_Param load() to detect that a
value has been set, as some users are first doing a 3D cal then later
doing a 1D cal. In that case load() was returning true and would give
a false positive
 2015-01-03 14:06:42 +11:00
Andrew Tridgell 06a72839ed AP_InertialSensor: fixed error detection on secondary IMUs 
the break; was preventing error detection on lsm303d/l3gd20
 2015-01-01 08:55:57 +11:00
Andrew Tridgell b9adc6e466 AP_InertialSensor: prefer sensors that have zero error counts 
if a sensor has failed in flight then try not to use it if another
error-free sensor is available
 2014-12-29 21:19:35 +11:00
Andrew Tridgell 7bb56e50aa AP_InertialSensor: fixed example build 2014-11-28 10:40:19 +11:00
Andrew Tridgell f84f432ecf AP_InertialSensor: allow gyro calibration to take up to 30 seconds 
this gives time for the user time to get their battery hatches on and
hold the model steady. 5 seconds was just far too short
 2014-11-22 18:27:51 +11:00
Andrew Tridgell 7c288e020b AP_InertialSensor: fixed detection of dead IMU 
if a PX4 sensor does not give new data we need to avoid calling
_rotate_and_offset_*() to avoid marking it as healthy. Otherwise if
the MPU6k dies we won't switch to the LSM303D automatically
 2014-11-16 12:30:33 +11:00
Andrew Tridgell 986b7bf894 AP_InertialSensor: fixed frequency to 16 bit in LDM303D and L3GD20 drivers 2014-11-11 17:06:22 +11:00
Andrew Tridgell 3518cf5480 AP_InertialSensor: fixed default MPU9250 orientation for NavIO 2014-11-04 16:18:35 +11:00
Andrew Tridgell ad7c612334 AP_InertialSensor: fixed SITL with new HIL code 2014-10-24 15:05:44 +11:00
Andrew Tridgell aeaa3c1e04 AP_InertialSensor: fixed build for VRBrain 2014-10-24 12:10:41 +11:00
Andrew Tridgell 40e83ceb1f AP_InertialSensor: simplify next sample time calculations 
this makes the calculation much clearer
 2014-10-24 12:10:40 +11:00
Andrew Tridgell 9dfbdb1e69 AP_InertialSensor: run the MPU6000 at 1kHz on fast CPUs 
use a software filter and 1kHz sampling for better filtering if we
have a fast enough CPU to do it
 2014-10-24 12:10:40 +11:00
Andrew Tridgell a047d1f569 AP_InertialSensor: moved default filter and sample_rate to frontend 
this simplifies the backends and prevents code repitition
 2014-10-24 12:10:40 +11:00
Andrew Tridgell 17b2214798 AP_InertialSensor: make it easier to add multiple backends 
use _add_backend() to add new backends on startup
 2014-10-24 12:10:40 +11:00
Andrew Tridgell bc5d79118d AP_InertialSensor: updated comments 2014-10-24 12:10:39 +11:00
Andrew Tridgell 3a9a5a9c18 AP_InertialSensor: implement gyro and accel health monitoring 
sensor is healthy if it gave a sample on the last update()
 2014-10-24 12:10:39 +11:00
Andrew Tridgell 586fa9a816 AP_InertialSensor: added product_id support 
fill in parameter from first backend
 2014-10-24 12:10:39 +11:00
Andrew Tridgell 520727e5bd AP_InertialSensor: fixed example build 2014-10-24 12:10:39 +11:00
Andrew Tridgell dbcd02f2be AP_InertialSensor: converted MPU9150 driver 
untested conversion
 2014-10-24 12:10:38 +11:00
Andrew Tridgell ff5f791343 AP_InertialSensor: converted flymaple driver to new API 2014-10-24 12:10:38 +11:00
Andrew Tridgell a42af0f2f1 AP_InertialSensor: use common AP_InertialSensor driver for PX4 and VRBRAIN 2014-10-24 12:10:38 +11:00
Andrew Tridgell 3ce7667e5a AP_InertialSensor: tidy up MPU6000 driver 2014-10-24 12:10:37 +11:00
Andrew Tridgell 2d47a07480 AP_InertialSensor: ported L3G4200D driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell deafcd6ddc AP_InertialSensor: improved timing in all drivers 2014-10-24 12:10:37 +11:00
Andrew Tridgell ff6d87f145 AP_InertialSensor: minor tidy up for HIL driver 2014-10-24 12:10:37 +11:00
Andrew Tridgell 85686c22ec AP_InertialSensor: converted the APM1/Oilpan driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell dcef9bb3b8 AP_InertialSensor: converted the MPU9250 driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell d48beb0c0f AP_InertialSensor: converted PX4 driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell ec11417705 AP_InertialSensor: converted HIL backend, which gets SITL working 2014-10-24 12:10:36 +11:00
Andrew Tridgell 448efc70a3 AP_InertialSensor: first steps in frontend/backend split 
This converts the MPU6000 driver to a frontend/backend structure, and
disables all other drivers. They will be progressively re-enabled as
each is converted
 2014-10-24 12:10:36 +11:00
Randy Mackay 834f2bea07 INS: add gyro_calibrated_ok_all method 
This returns true if the gyros have been calibrated successfully
 2014-10-09 10:00:07 +09:00
Randy Mackay 0803d79701 INS: param descriptions for ACC2, GYR2 2014-09-27 21:05:33 +09:00
Randy Mackay 74553e523d INS: add get_accel_health_all and get_gyro_health_all 
Returns true only if all available accels or gyros are healthy
 2014-09-03 11:22:46 +09:00
Randy Mackay 50ae5b2519 InertialSensor: reorder .cpp file to match .h 
No functional changes
 2014-09-03 11:19:36 +09:00
Andrew Tridgell dcdb53584b AP_InertialSensor: use lockless structures in MPU9250 driver 
this avoids suspending timers when transferring data between main
thread and SPI read thread
 2014-08-22 21:13:11 +10:00
Andrew Tridgell 5c9e5fbc11 AP_InertialSensor: removed use of hrt_absolute_time() 2014-08-20 09:10:24 +10:00
Andrew Tridgell a14f8dbd0a AP_InertialSensor_MPU9250: use micros64() and millis64() 2014-08-20 08:02:34 +10:00
Andrew Tridgell 3c2ab31415 AP_InertialSensor: get rid of data_ready for MPU9250 
when running off a 1kHz timer and reading at 1kHz it is better to
double sample than it is to skip a sample, as skipping samples will
throw the filter off, whereas a double sample will have minimal effect
 2014-08-19 20:03:33 +10:00
Andrew Tridgell 9e01c657e5 AP_InertialSensor: update MPU9250 driver for 1kHz operation 
use a time base sample wait, with 1kHz sampling
 2014-08-19 20:03:33 +10:00
Andrew Tridgell 532e9aace4 AP_InertialSensor: fixed timer bug in HIL sensors 2014-08-19 20:03:33 +10:00
Andrew Tridgell 12239de00d AP_InertialSensor: fix data_ready return for L3GD20 2014-08-19 10:14:20 +10:00
Andrew Tridgell 7286e7acd2 AP_InertialSensor: fixed build errors on APM2 2014-08-19 10:08:17 +10:00
Andrew Tridgell 50068a7c6a AP_InertialSensor: fixed default orientation for PXF board MPU9250 2014-08-19 10:08:16 +10:00
Víctor Mayoral Vilches 5e5319e23b AP_InertialSensor: MPU9250 cleaning 2014-08-19 10:08:16 +10:00
Víctor Mayoral Vilches df1de4efd6 AP_InertialSensor: Driver added for the LSM303D 2014-08-19 10:08:15 +10:00
Víctor Mayoral Vilches 8968647873 AP_InertialSensor: INS_generic example, add support L3GD20 2014-08-19 10:08:15 +10:00
Víctor Mayoral Vilches 0f908a8ccd HAL_Linux: Add L3GD20 to the AP_InertialSensor header 2014-08-19 10:08:15 +10:00
Víctor Mayoral Vilches 556d46a4ef AP_InertialSensor: L3GD20 driver added 
L3GD20 gyro userspace sensor added. The driver constructs
over the implementation of the PX4 Dev Team at
https://github.com/diydrones/PX4Firmware.
 2014-08-19 10:08:15 +10:00
Víctor Mayoral Vilches bfacf08c30 HAL_Linux: LSM9DS0 legacy driver moved to AP_InertialSensor/LSM9DS0/ 
The new LSM9DS0 driver will consist of the AP_InertialSensor_L3GD20 and
the AP_InertialSensor_LSM303D. For that reason the old LSM9DS0
(consisting of gyro and accel+mag implemented on a single class) has
been moved to a folder.

Legacy LSM9DS0 didn't probe to receive "correct" data.
 2014-08-19 10:08:15 +10:00
Randy Mackay 51f40fe3d6 INS: add accessor for mpu6k filter 2014-08-14 11:47:23 +09:00
Randy Mackay 0e7cbd28c8 INS_HIL: init members to resolve compiler warnings 2014-08-14 11:27:32 +09:00
Andrew Tridgell 24251a7e12 AP_InertialSensor: fixed example build 2014-08-13 21:48:35 +10:00
Andrew Tridgell 984064f3d3 AP_InertialSensor: fixed example build 2014-08-13 18:46:44 +10:00
Mikhail Avkhimenia 34da221c3d AP_InertialSensor: Use MPU9250 DRDY pin only on boards that support it 2014-08-12 22:13:00 +10:00
Andrew Tridgell f8ceccce32 AP_InertialSensor: improved HIL timing consistancy 
try to keep the average time for each sample right
 2014-08-09 22:50:15 +10:00
Andrew Tridgell 1d4d848300 AP_InertialSensor: fixed a build warning 2014-08-08 13:48:03 +10:00
Andrew Tridgell ed6ab5f1d3 AP_InertialSensor: use bool for blocking_read() 
uint8_t return was confusing
 2014-08-07 13:09:17 +10:00
Michael Carpenter b4c0e1215b AP_InertialSensor: Use return value of blocking_read to handle calibration timeouts 2014-08-07 13:04:18 +10:00
Andrew Tridgell cc735a4200 AP_InertialSensor: some more debug info for VibTest 2014-07-31 12:48:30 +10:00
Andrew Tridgell f7b01a6f3f AP_InertialSensor: avoid integer underflow in mavlink txspace check 2014-07-27 22:18:52 +10:00
Andrew Tridgell 662276597a AP_InertialSensor: fixed example build 2014-07-25 17:52:14 +10:00
Andrew Tridgell 79f453dfd3 AP_InertialSensor: use LSM9DSO_AM device 2014-07-19 13:23:54 +10:00
Randy Mackay 6baedbda1d AP_InertialSensor: add empty virtual destructor 2014-07-16 14:56:56 +09:00
Randy Mackay a09f7b9198 AP_InertialSensor_MPU6k: init members to reduce compiler warnings 2014-07-16 14:40:55 +09:00
Randy Mackay c5a03ea18e AP_InertialSensor: init members to reduce compiler warnings 2014-07-16 14:40:53 +09:00
LukeMike 85fc72c57c AP_InertialSensor: VRBRAIN added 3th inertial sensor 2014-07-15 20:42:15 +10:00
Andrew Tridgell 0f724c1d7a AP_InertialSensor: removed per-device example code 
now can use a single generic test for all boards
 2014-07-14 09:44:36 +10:00
Andrew Tridgell 5a170c6343 AP_InertialSensor: added INS_generic test 2014-07-14 09:44:36 +10:00
Andrew Tridgell d1ba78002d AP_InertialSensor: added paranoid check for DRDY pin 2014-07-14 09:44:36 +10:00
Andrew Tridgell 6f9965cc22 AP_InertialSensor: fixed setup of DRDY pin on MPU9250 2014-07-14 09:44:36 +10:00
Andrew Tridgell 6a6dbe5790 AP_InertialSensor: added check for WHOAMI on MPU9250 2014-07-14 09:44:35 +10:00
Andrew Tridgell abb53eb9a2 AP_InertialSensor: simplify using HAL board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell 848b563fc3 AP_InertialSensor: rotate acccel/gyro for PXF 2014-07-14 09:44:34 +10:00
Andrew Tridgell ea188528fc AP_InertialSensor: fixed build errors for LSM9DSO 2014-07-14 09:44:34 +10:00
Víctor Mayoral Vilches 2982fc029c AP_InertialSensor_LSM9DS0: Fix _dump_registers method 2014-07-14 09:44:34 +10:00
Víctor Mayoral Vilches feedc40f72 AP_InertialSensor_LSM9DS0: Move LSM9DS0_DEBUG flag to the header 2014-07-14 09:44:34 +10:00
Andrew Tridgell 297bb52ced AP_InertialSensor: added MPU9250 header 2014-07-14 09:44:34 +10:00
Víctor Mayoral Vilches f213f01983 AP_InertialSensor_LSM9DS0: Remove previous CS handling. 
CS is now being automatically handled by the SPI Driver.
 2014-07-14 09:44:33 +10:00
Andrew Tridgell 3ed4f82cb0 AP_InertialSensor: fixed DRDY include for Linux 2014-07-14 09:44:33 +10:00
Andrew Tridgell 06b6d7aaf0 AP_InertialSensor: fixeup DRDY pin for different boards 2014-07-14 09:44:33 +10:00
Víctor Mayoral Vilches 3379ddd51f AP_InertialSensor_MPU6000: Add _register_write_check method. 
This private method allows to check whether the value written and
the posterior value readed are the same.
Should be used only for debuging purposes, for release versions use
_register_write instead.
 2014-07-14 09:44:33 +10:00
Víctor Mayoral Vilches 0fff8df491 AP_InertialSensor: fix LSM9DS0 test code 2014-07-14 09:32:30 +10:00
Víctor Mayoral Vilches bb5de8a6a1 AP_InertialSensor_LSM9DS0: Fix the CS. 2014-07-14 09:29:45 +10:00
Víctor Mayoral Vilches ad3a3f9366 AP_InertialSensor_MPU6000: Fix the CS. 2014-07-14 09:29:45 +10:00
Víctor Mayoral Vilches aa60a89cda AP_InertialSensor_MPU9250: Fix SPI CS. 2014-07-14 09:29:45 +10:00
Víctor Mayoral Vilches bae84e2942 AP_InertialSensor: Add missing library to test example. 2014-07-14 09:29:36 +10:00
Víctor Mayoral Vilches 4df3b55ed4 AP_InertialSensor_MPU9250: Add missing library for example/ 
In order to compile the examples test a library needed to
added.
 2014-07-14 09:29:36 +10:00
Víctor Mayoral Vilches eb95130441 AP_InertialSensor_MPU9250: remove legacy CS. 2014-07-14 09:29:18 +10:00
Víctor Mayoral Vilches 5e7e28a83e AP_InertialSensor_MPU9250.cpp: Update the DRDY pin. 2014-07-14 09:29:18 +10:00
Víctor Mayoral Vilches d053a91cd5 AP_InertialSensor_MPU6000: Remove MPU6000_CS_PIN 
Remove MPU6000_CS_PIN, a legacy way of handling
Chip Select.
 2014-07-14 09:29:18 +10:00
Víctor Mayoral Vilches d9cb29ea8b AP_InertialSensor_MPU6000: Correct DRDY pin. 2014-07-14 09:29:18 +10:00
Víctor Mayoral Vilches df14318bbd AP_InertialSensor_L3G4200D: Clock-based wait_for_sample() impl. 2014-07-14 09:29:08 +10:00
Víctor Mayoral Vilches 7cf1187473 AP_InertialSensor_MPU9150: Clock-based wait_for_sample() impl. 
Adapt the I2C driver to a system clock based wait_for_sample()
implementation.

The sample rate of the sensor has been corrected to 800 Hz (could be
further pushed up to 1KHz).

Filters for the mag have also been created but remain commented until
the code for the mag is ready.
 2014-07-14 09:10:23 +10:00
Víctor Mayoral Vilches c4babc543d AP_InertialSensor_LSM9DS0: SPI userspace sensor driver. 
ST Microelectronics 9 DOF IMU userspace sensor driver. Some
work with the filters needs to be done.
 2014-07-14 09:10:23 +10:00
Víctor Mayoral Vilches 1c07985518 AP_InertialSensor_MPU9150: Comment the suspend_timer_procs 
It causes the driver to hang. This matter should be inspected.
 2014-07-14 09:02:47 +10:00
Víctor Mayoral Vilches d65aefbef5 AP_InertialSensor_MPU6000: Fix the test code so that compiles. 2014-07-14 09:02:47 +10:00