Lucas De Marchi
d3e9f7ce66
AP_HAL: add HAL_PX4_HAVE_PX4IO
2017-03-24 12:06:19 +11:00
Lucas De Marchi
7f5b551050
AP_HAL: add HAL_PX4_HAVE_MTD_SUPPORT
2017-03-24 12:06:19 +11:00
Lucas De Marchi
c7fc3ffbc4
AP_HAL: add HAL_HAVE_BOARD_VOLTAGE
2017-03-24 12:06:19 +11:00
Lucas De Marchi
37a050eed9
AP_HAL: add comments and allow for board overrides
2017-03-24 12:06:19 +11:00
Lucas De Marchi
2e4e4365d0
AP_InertialSensor: enable fast sampling for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
9a83f05714
AP_BoardConfig: enable voltage monitoring on aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
7c1f255258
AP_HAL_PX4: add pin to monitor battery
2017-03-24 12:06:19 +11:00
Lucas De Marchi
5787b5a5c5
AP_Compass: IST8310: rename macros
...
Having "BIT" in the name gives the impression we are using the macro is
the bit position; however they have the values for those actions, not
the bit position. Rename BIT to VAL to be less confusing.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
4bba643abb
AP_Compass: IST8310: use variable periodic callback
...
This is the equivalent of sleep and wait for the conversion time,
after had triggered a new sample request. However it also has the added
benefits of sharing a thread with other sensors on the same bus.
Now we don't read the status register anymore since we have a guaranteed
wait time.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
ce1a13aa8f
AP_Compass: IST8310: use FSR to reject samples
2017-03-24 12:06:19 +11:00
Lucas De Marchi
d84851d8fa
AP_Compass: IST8310: improve initialization
...
- Make sure device is reset while initializing.
- Give better names to register macros
- Average X, Y and Z by 16: sensor is internally running at 200 sps
(theoretical, ~160 pratical). The wait time is ~6msec averaging
by 16. We do 10msec.
2017-03-24 12:06:19 +11:00
Tom Pittenger
c0691afc1f
AP_Compass: reject outlier data in IST8310 data by detecting >14bit data
2017-03-24 12:06:19 +11:00
Lucas De Marchi
91dabbe418
AP_HAL_PX4: implement method to ajust periodic callback
...
Just setting up the periodic callback sampling time on initialization
may not work well for sensors that need to request for a sample with a
bus transaction, sleep and then read the new data. That's because the
function will be kept calling at a periodic rate, while the time in
which we can read the value is not really that sampling time, but rather
the time in which sensor was last read + the time spent in the function
before sending a new sample request.
Instead of creating a new type of thread to handle this case, just
implement the minimal and easy case of updating the period for this
callback, that can only be called from inside the callback function.
2017-03-24 12:06:19 +11:00
Tom Pittenger
8415fde697
AP_Compass: IST8310 chip does not follow right-hand rule format, flip z
2017-03-24 12:06:19 +11:00
Lucas De Marchi
b339050e45
AP_Compass: IST8310: account for errors in measurment requests
...
If we don't recover for errors in the request for new sample, we may get
stuck with no sample anymore. Recover from bad transfers.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
2349909033
AP_BoardConfig: start mtd driver
2017-03-24 12:06:19 +11:00
Lucas De Marchi
da68612f4b
AP_BoardConfig: make error function public and static
...
So it can be used by other parts of the code calling px4_start_driver().
2017-03-24 12:06:19 +11:00
Tom Pittenger
fb24a03faf
AP_Baro: don't compile drivers for devices that don't use them
2017-03-24 12:06:19 +11:00
Lucas De Marchi
156efd6fec
AP_Compass: use IST8310 for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
fad583b259
AP_HAL_PX4: RCOoutput_Tap: map to [ RPMSTOPPED, RPMMAX ] range
...
When it's not armed we get _esc_pwm_min from the AP_Motors library,
which would cause motors to start spinning. Map it to start from
RPMSTOPPED so it doesn't spin when it's not armed.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
5e26940070
AP_HAL_PX4: disable safety switch for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
a682bb837a
AP_SerialManager: uartA with 460800 baud for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
20c5e9ec08
Add support for external mag on aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
327de91b5c
AP_HAL_Px4: use RCOutput_Tap for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
75977cd890
AP_HAL_PX4: implement motor output for aerofc
...
This uses tap ESCs, as found on the PX4 project, translated to our
internal APIs. It doesn't have the feedback from ESCs yet.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
ce9013b8ee
AP_HAL_PX4: add RCOutput skeleton for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
87846fe049
AP_InertialSensor: use MPU6500 on aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
b4d0569339
AP_HAL_PX4: Use empty RCOutput driver for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
00c2949dfb
Add support for baro on aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
b17acfee12
Add aerofc support
...
Flight Controller board that comes on Intel Aero RTF Drone.
2017-03-24 12:06:19 +11:00
Andrew Tridgell
2d603c1cba
SRV_Channel: fixed reversing on servo gimbals
2017-03-23 11:02:07 +09:00
Jacob Walser
1b00dfb642
AP_GPS: Fix parameter metadata
2017-03-22 16:16:26 -07:00
Jacob Walser
a9a8521383
AP_OpticalFlow: Fix parameter metadata
2017-03-22 16:16:26 -07:00
Jacob Walser
646d68c76d
AP_NavEKF2: Fix parameter metadata
2017-03-22 16:16:26 -07:00
Jacob Walser
84e5e088de
AP_BoardConfig: Fix parameter metadata
2017-03-22 16:16:26 -07:00
murata
1a781f44cc
AP_Notify: Correct the display area clear of the text message.
2017-03-22 01:24:21 +00:00
Francisco Ferreira
c0238be345
AP_FrSky_Telem: fix sending messages 3 times
...
Initialize variable
Also some small style changes
2017-03-22 01:23:26 +00:00
Florent Martel
02c0885cfd
AP_Frsky_Telem: fixes #5862
...
MAVLink strings of exactly 50 characters are not NULL terminated, so
instead we must check that the 50th character has been reached.
2017-03-22 01:22:14 +00:00
Siddharth Bharat Purohit
5029dd1bab
AP_HAL_PX4: GPIO: return correct FMU pin read even if IO not connected/detected
2017-03-22 12:15:05 +11:00
Michael du Breuil
2aec41e0ef
AP_HAL_SITL: Fix SIM_GPS_DISABLE not disabling the ublox GPS with PVT support
2017-03-19 23:13:11 -07:00
Eugene Shamaev
41fe4d0515
AP_Landing: fix to remove reorder warning
2017-03-20 07:32:36 +11:00
Pierre Kancir
1a374aa9f6
SIM_Gazebo: add a timeout to reset timestamp check
2017-03-18 19:58:11 +11:00
Pierre Kancir
d4a0a92b8b
SITL: cmdline reorder help and param for better readability and futher extension
...
add missing options
2017-03-18 19:58:11 +11:00
Pierre Kancir
29d35699f2
SITL: Gazebo, throw old paquet based on timestamp as we are using UDP
...
Add some comments
2017-03-18 19:58:11 +11:00
Pierre Kancir
d612209c19
SITL: Gazebo fix implicit cast
2017-03-18 19:58:11 +11:00
Pierre Kancir
ee7355a301
SITL: Reduce some variables scope and include
2017-03-18 19:58:11 +11:00
Pierre Kancir
8054405521
SITL: Change interface port to a generic solution for external simulator
2017-03-18 19:58:11 +11:00
Pierre Kancir
6e0319d513
SITL: Add RCout port option to cmdline
2017-03-18 19:58:11 +11:00
Pierre Kancir
a8d5079a38
SITL: Ensure that Instance parameter don't override manualy setted port
2017-03-18 19:58:11 +11:00
Tully Foote
25fad0a8c2
SITL: Add more command line arguments for port selection.
2017-03-18 19:58:11 +11:00
Pierre Kancir
5b8c89225a
SITL: Make socket more verbose
2017-03-18 19:58:11 +11:00
Pierre Kancir
567a8d68e5
SITL: Make socket error more verbose
2017-03-18 19:58:11 +11:00
Pierre Kancir
8f2bdf51ea
SITL: gazebo add socket drain
2017-03-18 19:58:11 +11:00
Pierre Kancir
1bb4e3c9b7
AP_IRLock_SITL: make port variable
2017-03-18 19:58:11 +11:00
Pierre Kancir
63ea8c6f21
SITL: enable multi sitl for gazebo
2017-03-18 19:58:11 +11:00
Andrew Tridgell
fc4caf51e9
HAL_PX4: fixed RC failsafe for SBUS on FMUv4
...
the FMUv4 SBUS parser sets timestamp_last_signal even if we are in
failsafe
thanks to Mark Whitehorn for finding this
2017-03-18 17:36:13 +11:00
Pierre Kancir
afb488c627
AP_GPS: fix implicit conversion warning from float to double
2017-03-17 13:07:57 +01:00
murata
33f91b5af5
AP_Notify: whitespace changes
2017-03-17 01:29:11 +00:00
murata
3a6f8d2136
AP_Notify: Preprocessor out EMOJI code group with character bitmap.
2017-03-17 01:26:54 +00:00
CSe
491b545fab
SITL: fix gimbal connection on Windows
2017-03-17 00:43:21 +00:00
Peter Barker
bcb0ead71a
AP_Notify: improve display detection
...
Create probe function for displays
Use a mask to determine I2C buses to probe
2017-03-17 00:37:40 +00:00
Pierre Kancir
bd4880b231
SRV_Channel: correct typo
2017-03-16 19:35:58 +00:00
Andrew Tridgell
2ef6473816
AP_ServoRelayEvents: fix do_set_servo
...
this was broken by the recent SRV_Channels changes
thanks to Jacob for noticing this!
2017-03-15 12:36:48 +11:00
Randy Mackay
132979b12f
AC_PosControl: protect against POS_Z_P, ACCEL_Z_P divide-by-zero
2017-03-15 09:22:23 +09:00
Randy Mackay
d4c4daca16
AC_WPNav: speed-up and down parameter min to 10cm/s
2017-03-15 09:22:23 +09:00
Randy Mackay
8c6c2e46cc
AC_WPNav: protect against LOIT_SPEED divide-by-zero
2017-03-15 09:22:23 +09:00
Andrey Kolobov
5fdebe23cc
AP_TECS: disable bad descent for soaring
2017-03-14 08:53:11 +11:00
Andrey Kolobov
9f2f070439
AP_Soaring: adding const qualifiers to some of soaring controller's methods
2017-03-14 08:53:11 +11:00
Andrew Tridgell
2b2fed735b
AP_Soaring: fixed SOAR logging
2017-03-14 08:53:10 +11:00
Andrey Kolobov
42f5b5a232
AP_Soaring: fixes for matrixN changes
2017-03-14 08:53:10 +11:00
Andrew Tridgell
819c70494f
AP_Soaring: added SOAR_ENABLE_CH parameter
2017-03-14 08:53:10 +11:00
Andrey Kolobov
a1fa2a9de3
AP_Math: added matrixN for soaring controller
2017-03-14 08:35:44 +11:00
akolobov
a3f3097941
AP_TECS: added function to reset integrator
2017-03-14 08:20:48 +11:00
akolobov
acddf6bdf3
AP_SpdHgtControl: added function to reset integrator
2017-03-14 08:20:48 +11:00
Andrey Kolobov
ea534f0445
AP_Soaring: added AP_Soar library, formerly known as SoaringController
2017-03-14 08:20:48 +11:00
Francisco Ferreira
7afcbf51ec
AP_Math: also fix SEC_PER_WEEK
2017-03-13 02:57:30 +00:00
murata
1982285e23
AP_Math: update MSEC_PER_SEC definition to fix GPS time calcs
2017-03-13 11:50:33 +09:00
Randy Mackay
b82098ca44
AP_GPS: fix blended ground course
...
Thanks to jyl58 for finding this
2017-03-13 11:21:47 +09:00
Randy Mackay
3e628f30ff
AP_GPS: fix blending when accuracy reported as 1mm
...
Thanks to Michael DuBreuil for suggesting the fix
2017-03-13 11:31:51 +11:00
Randy Mackay
f340c118d4
AP_Arming: GPS blending health check renamed
2017-03-13 11:31:51 +11:00
Randy Mackay
2002827de3
AP_GPS: rename pre-arm blending health check
2017-03-13 11:31:51 +11:00
Randy Mackay
e9c881c668
AP_GPS: stop blending if too many blending failures
2017-03-13 11:31:51 +11:00
Randy Mackay
b7ad8da9b9
AP_GPS: minor bracketing fix
...
This silences a warning from eclipse
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay
5de64273ec
AP_GPS: more efficient initialisation of blending arrays
2017-03-13 11:31:51 +11:00
Randy Mackay
81b20e971b
AP_GPS_UBLOX: use get_rate_ms accessor
2017-03-13 11:31:51 +11:00
Randy Mackay
ef1399a52f
AP_GPS: fixups after peer review
...
This includes these changes:
RATE_MS, RATE_MS2 parameter description Range minimum reduced to 50
_blend_health_counter is reset to 0 if blending is disabled
GPS_MAX_RECEIVERS is replaced with GPS_BLENDED_INSTANCE where appropriate
simplify all_consistent functions check of number of receivers
calc_blended_weights fix for initial check of how many receivers we have
remove unnecessary setting of GPS last time when blending fails
remove RebootRequired from AUTO_SWITCH param description
2017-03-13 11:31:51 +11:00
Randy Mackay
2f21e3b40c
DataFlash: rename GPS3/GPA3 to GPSB/GPAB
2017-03-13 11:31:51 +11:00
Randy Mackay
4f0333892d
AP_Arming: clarify GPS inconsistency message
2017-03-13 11:31:51 +11:00
Randy Mackay
e398bb5c68
AP_Arming: make gps-checks virtual
...
Copter's GPS checks will override this
2017-03-13 11:31:51 +11:00
Randy Mackay
9f21649dc0
AP_Arming: add gps consistency and blend health check
2017-03-13 11:31:51 +11:00
Randy Mackay
729ce34ce3
AP_GPS: add all_consistent and blend health for use as pre-arm check
2017-03-13 11:31:51 +11:00
Randy Mackay
72dfe1127f
AP_GPS: protect parameters from being accessed externally
...
backends become friends so they can continue to access parameters held in frontend
get_rate_ms made private because only used by frontend
Also moved static arrays higher in cpp file
2017-03-13 11:31:51 +11:00
Randy Mackay
3172657f26
AP_GPS: move constructor and complex accessors to cpp file
...
These functions are slightly long and make the .h file hard to read. Also saves a small amount of flash space.
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay
0066022a7f
AP_GPS: check for valid instance in highest_supported_status
...
highest_supported_status will always return FIX_3D for blended or invalid instance
setHIL_Accuracy checks instance is 2 or less
send_mavlink_gps2_raw uses num_instances variable directly to avoid confusion with num_sensors
2017-03-13 11:31:51 +11:00
Randy Mackay
e764f0d5d0
AP_GPS: sanity check update rate
...
Also minor spelling and parameter documentation fix
2017-03-13 11:31:51 +11:00
priseborough
6b26bdd454
AP_GPS: Add option to blend multiple GPS receivers
...
Fix pre-existing bug in hard switch logic
Update GPS_AUTO_SWITCH description
protect against zero accuracy estimates returned by GPS drivers
2017-03-13 11:31:51 +11:00
Randy Mackay
cd379b0e86
AP_GPS: move time_epoch calcs into proper file
...
The frontend implementation was in the backend file
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay
a79474dcbc
AP_GPS: minor comment fix
...
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay
201504dbae
AP_GPS: remove unused get_antenna_offsets()
...
callers always specify an instance
2017-03-13 11:31:51 +11:00
Randy Mackay
2d0258b6a2
AP_GPS: remove unused highest_supported_status(void)
2017-03-13 11:31:51 +11:00
Randy Mackay
ac86c7999b
AP_GPS_MAV: set have_accuracy as boolean
2017-03-13 11:31:51 +11:00
priseborough
a82b6929f1
DataFlash: Allow logging of blended GPS instance
...
Add GPS and GPA reporting for blended solution
Allow GPS library to manage reporting for the blended solution
2017-03-13 11:31:51 +11:00
priseborough
56a9e2c462
AP_NavEKF3: Reference correct derivation
2017-03-13 11:31:51 +11:00
priseborough
44fa82d58c
AP_NavEKF2: Reference correct derivation
2017-03-13 11:31:51 +11:00
priseborough
18927395d7
AP_NavEKF3: log correct GPS for replay
2017-03-13 11:31:51 +11:00
priseborough
407a60e599
AP_NavEKF2: log correct GPS for replay
2017-03-13 11:31:51 +11:00
priseborough
01551a4423
AP_NavEKF3: handle position jump caused by change in GPS receiver
...
If the GPS receiver selection changes and we are using GPS for height, the vertical position will be reset to the new GPS height measurement.
correct output observer history when doing a GPS height reset
2017-03-13 11:31:51 +11:00
priseborough
8c46d4316b
AP_NavEKF2: handle position jump caused by change in GPS receiver
...
If the GPS receiver selection changes and we are using GPS for height, the
vertical position will be reset to the new GPS height measurement.
correct output observer history when doing a GPS height reset
2017-03-13 11:31:51 +11:00
Randy Mackay
341b926a43
AP_HAL_SITL: add glitch for 2nd ublox
2017-03-13 11:31:51 +11:00
Randy Mackay
07ce7b8bd6
SITL: add GPS2_GLITCH parameter
2017-03-13 11:31:51 +11:00
Michael Oborne
e4ff445ea7
AP_GPS_GSOF-NOVA: fix last_gps_time_ms
2017-03-09 10:41:48 -08:00
mirkix
9e1345453f
AP_HAL_Linux: BBBmini remove onboard OpticalFlow
2017-03-07 22:48:48 -08:00
mirkix
ac60ddfdde
AP_OpticalFlow: allow to search on I2C bus 2
2017-03-07 22:48:48 -08:00
mirkix
ad208cab56
AP_OpticalFlow: BBBmini remove onboard OpticalFlow
2017-03-07 22:48:48 -08:00
mirkix
81da61a68d
AP_HAL: BBBmini remove onboard OpticalFlow
2017-03-07 22:48:48 -08:00
Michael du Breuil
be1fd147fc
Arming: Remove the SITL protection around GPS configuration, and rely upon the GPS library instead
2017-03-07 12:43:30 +11:00
Michael du Breuil
398ff823c0
AP_GPS: Always consider ublox as configured in sitl
2017-03-07 12:43:30 +11:00
Francisco Ferreira
f6687a2d6c
AP_Baro: fix example output
...
PX4 boards can only start console after USB is connected so we need to
check it is available
2017-03-07 09:37:14 +11:00
jaxxzer
b98573d55f
SITL: Improved Sub simulation
...
-Constrain z axis movement between -100m (seafloor) and 0m (water
surface)
-More accurate thruster modelling
2017-03-07 09:35:41 +11:00
Michael du Breuil
44bcd74a57
AP_GPS: Remove dead SBF code
...
CID 125035
2017-03-06 15:24:22 +00:00
Randy Mackay
7a7f8eb7c1
AC_Avoidance: only stop below alt-fence if fence is enabled
2017-03-06 18:02:03 +09:00
Randy Mackay
3e039a6ba4
AP_NavEKF3: minor formatting fixes
...
No functional change
2017-03-06 18:40:18 +11:00
Randy Mackay
a80c0a231d
AP_NavEKF3: attempt to set-up every core
...
previously we would only call setup_core for the 2nd core if the first had been setup successfully
2017-03-06 18:40:18 +11:00
priseborough
7a8783f35e
AP_NavEKF3: Fix bug preventing reset to GPS
...
This fixes a bug that prevented the reset to the GPS position occurring if GPS velocity observations were still passing innovation consistency checks.
2017-03-06 17:11:39 +11:00
priseborough
b7c4945000
AP_NavEKF2: Fix bug preventing reset to GPS
...
This fixes a bug that prevented the reset to the GPS position occurring if GPS velocity observations were still passing innovation consistency checks.
2017-03-06 17:11:39 +11:00
Michael du Breuil
7f11cf3ca6
AP_Mount: Remove solo gimbal from the minimal build support
2017-03-06 11:53:08 +11:00
Randy Mackay
67097c8d59
AC_AttitudeControl: use gyro_latest
...
This allows moving the attitude control before the ahrs/ekf update
We continue to use ahrs.get_gyro for the non-time-critical heli
passthrough functions. We should avoid using get_gyro_latest() unless we know there is a direct benefit because it could lead to inconsistent gyro values vs what the EKF is using.
2017-03-03 13:14:28 +11:00
Randy Mackay
d3aca5544e
AP_AHRS: get_gyro_latest returns latest rates from IMU with drift correction
...
Pulling the gyro values from the IMU allows our rate controllers to run before the EKF
2017-03-03 13:14:28 +11:00
Andrew Tridgell
ce978595cd
AP_BoardConfig: added support for ICM-20602 detection
2017-03-02 14:21:36 +11:00
Andrew Tridgell
875274e761
AP_InertialSensor: added support for ICM-20602
...
treat the same as a 20608
2017-03-02 14:21:36 +11:00
Andrew Tridgell
e7024d9203
AP_Landing: restructure parameters into a structure
2017-03-02 12:38:59 +11:00
Michael du Breuil
547d06febf
AP_Landing: Add deepstall support
2017-03-02 12:38:59 +11:00
Michael du Breuil
8b20577b74
AP_Landing: Add a servo override interface and PID logging interface
2017-03-02 12:38:59 +11:00
Michael du Breuil
ed359a5833
Dataflash: Add landing PID logging
2017-03-02 12:38:59 +11:00
Michael du Breuil
c10fe2e7a4
AP_Landing: Add more interfaces from vehicle code
...
Fixs up some documentation about expected return values
2017-03-02 12:38:59 +11:00
Michael du Breuil
c5c94949bf
AP_Math: Extend vector2::angle(vector2) to distinguish parallel and antiparallel vectors
...
There are a number of use cases where distingusihing antiparallel from parallel vectors is important
2017-03-02 00:50:44 +00:00
Andrew Tridgell
05cbc19ad6
AP_RangeFinder: added type 15 for LidareLiteV3
2017-03-01 22:44:37 +11:00
Andrew Tridgell
cf3db7560c
AP_BoardConfig: fixed AUAV21 board ID to not overlap with VRBrain boards
2017-03-01 18:07:44 +11:00
Jacob Walser
507b461388
AP_Motors: Initialize throttle range directly
...
This was causing SITL to hang at boot when motors object is statically allocated.
2017-02-28 22:34:35 -08:00
Andrew Tridgell
b86513f503
AP_InertialSensor: support AUAV21 board
2017-03-01 17:24:10 +11:00
Andrew Tridgell
37c9e08316
AP_Compass: support AUAV21 board
2017-03-01 17:24:10 +11:00
Andrew Tridgell
d5cad2ae44
AP_Baro: support AUAV21 board
2017-03-01 17:24:10 +11:00
Andrew Tridgell
1989f31ae3
AP_BoardConfig: added AUAV21 board type
...
unfortunately this uses the same sensor types as the PHMini, which
means we can't auto-detect the difference between them.
2017-03-01 17:24:10 +11:00
Randy Mackay
d79403707b
AC_AttControl: add feed forward param descriptions
...
No functional change
2017-03-01 14:59:44 +09:00
Randy Mackay
fd94ab43fa
AP_Proximity: minor fix to param description
...
No functional change
2017-03-01 14:59:44 +09:00
Randy Mackay
36bcabb4e4
SRV_Channel: add constraint to move_servo
2017-02-28 19:29:00 +11:00
Randy Mackay
7b3af58634
AC_Avoidance: fix AVOID_ANGLE_MAX parameter description
2017-02-28 15:33:59 +09:00
Andrew Tridgell
adf215998f
SRV_Channel: added MotorTilt to docs for SERVOn_FUNCTION
2017-02-28 08:10:56 +11:00
Randy Mackay
2b43c6aeed
DataFlash: log range finder orientation
2017-02-27 15:18:40 +09:00
Randy Mackay
e725ae866b
AP_OpticalFlow: fix example sketch
2017-02-27 15:18:13 +09:00
Randy Mackay
a74833a04a
AP_AHRS: fix example sketch
2017-02-27 15:18:13 +09:00
Randy Mackay
65c8f87b17
AP_Frsky_Telem: only use downward facing rangefinder
2017-02-27 15:18:12 +09:00
Randy Mackay
3f6a734a71
AP_NavEKF3: only use downward facing rangefinder
2017-02-27 15:18:11 +09:00
Randy Mackay
563be389ee
AP_NavEKF2: only use downward facing rangefinder
2017-02-27 15:18:10 +09:00
Randy Mackay
a093bcb05f
AP_Proximity: add rangefinder driver
...
This allows avoidance using upward or forward facing range finders
2017-02-27 15:18:09 +09:00
Randy Mackay
c98e598ae2
AP_RangeFinder: fix example sketch
2017-02-27 15:18:08 +09:00
Randy Mackay
e7dd21a0bb
AP_RangeFinder: remove primary, add orientation
2017-02-27 15:18:03 +09:00
Randy Mackay
49f4afc2a1
AC_Avoidance: add 2m margin to upward avoidance
2017-02-27 09:48:29 +09:00
Peter Barker
d170396acf
Notify: Display: blank text line after 10s
2017-02-27 09:02:09 +09:00
Peter Barker
da03cf29d6
Notify: Display: pad GPS status/sat count to fix stray chars
2017-02-27 08:14:25 +09:00
Lucas De Marchi
f972fed70b
AP_HAL_PX4: rename method to follow AP_HAL
...
This allows to avoid the cast in the HAL, making it easier to replace
the implementation with an Empty::RCOutput while prototyping.
2017-02-26 13:38:24 +11:00
Lucas De Marchi
686e0f08d6
AP_HAL: RCOutput: add optional timer_tick() method
...
This is common enough across the HAL implementaions so add a method for
it to avoid the need for casts inside the HALs.
2017-02-26 13:38:24 +11:00
Lucas De Marchi
ade1876318
AP_Motors: tie esc scaling with set_throttle_range()
...
We need to update the esc scaling from inside the Motors library, that
has access to the MOT_PWM_[MIN|MAX] values. Otherwise even though the
AP_Motors library honors the value for calculations, the RCOutput
drivers that need the scaling to set the real HW scaling will not work.
Right now it scales the value using the throttle_channel's min/max, even
though AP_Motors may be passing values in other range.
2017-02-26 13:38:24 +11:00
Lucas De Marchi
e1eda3066c
AP_HAL_PX4: SPIDevice: add missing ifdefs
...
These sensors may always be present on px4fmu* boards, but they are not
always present for all boards supported by the PX4Firmware.
2017-02-26 13:37:13 +11:00
Lucas De Marchi
2d50eb312c
AP_InertialSensor: add support to MPU6500
...
Just like and MPU9250 without mag and with different WHOAMI register.
2017-02-26 13:37:13 +11:00
Lucas De Marchi
8002df6e45
AP_HAL: add MPU6500 defines
2017-02-26 13:37:13 +11:00
Andrew Tridgell
e5ed20d6f7
AC_AttitudeControl: added set_throttle_mix_value()
...
used by quadplane
2017-02-26 09:20:51 +11:00
Peter Barker
e744460ff5
AP_AHRS: mark many functions as override
...
Also take the opportunity to remove void parameter
2017-02-24 21:13:08 +11:00
Peter Barker
6ee4045878
AP_AHRS: mark new relative position functions override
2017-02-24 21:13:08 +11:00
Peter Barker
35f876f853
AP_AHRS: examples: correct AHRS_Test
...
This is required so gcs() returns an object
2017-02-24 21:13:08 +11:00
Peter Barker
4ed7fb154f
AP_AHRS: supply missing get_relative_position_D_home
...
Simply returns the baro altitude (like EKF does if it lacks
position)
2017-02-24 21:13:08 +11:00
Peter Barker
24647fb2b0
AP_AHRS: make get_relative_position_D_home pure virtual
...
Having a void function with a return parameter that isn't
filled in by the base class function seems like a bad idea
2017-02-24 21:13:08 +11:00
Peter Barker
d6807d749c
GCS_MAVLink: make send_statustext virtual
2017-02-23 23:03:54 -08:00
Peter Barker
c93942695f
AP_Param: load parameters from a comma-separated-list
...
This patch will break things for anyone who is using
a comma in their filenames for their ardupilot defaults
files.
2017-02-23 22:46:33 -08:00
Peter Barker
fe189fefbc
AP_Param: Factor load_defaults_file (NFC)
2017-02-23 22:46:33 -08:00
Lucas De Marchi
0a381dfa1b
AP_HAL: document method to split transfers
2017-02-23 22:38:15 -08:00
Lucas De Marchi
32d208dbe8
AP_HAL_Linux: move check for _split_transfers
...
This is likely not true, so allow not to check the other conditions.
Also remove comment since this is going to be added to the method.
2017-02-23 22:38:15 -08:00
Andrew Tridgell
df1da3c14e
AP_RangeFinder: setup for split I2C transfers
...
this fixes PulsedLight Lidar on Linux
2017-02-23 22:38:15 -08:00
Andrew Tridgell
a2e445cf24
HAL_Linux: implement set_split_transfers() API for I2C
2017-02-23 22:38:15 -08:00
Andrew Tridgell
dc26cbc074
AP_HAL: added set_split_transfers() API for I2C
2017-02-23 22:38:15 -08:00
Michael du Breuil
7b483a1460
AP_GPS: Ublox, always quickly set the rates until we have fetched the version
2017-02-23 07:33:58 +11:00
Tom Pittenger
76dabf2dd9
AP_ADSB: cleanup
...
non-functional change
2017-02-22 11:55:47 -08:00
Tom Pittenger
5adbf9b232
AP_ADSB: populate altitude via pressure for ADSB-Out
...
fixes https://github.com/ArduPilot/ardupilot/issues/5424
2017-02-22 11:55:47 -08:00
Michael du Breuil
1de198883d
AP_NavEKF3: Check gps vertical accuracy for aligning the GPS
2017-02-22 11:53:42 -08:00
Michael du Breuil
8b69f1708e
NavEKF2: Add optional check for GPS vertical accuracy before aligning the EKF
2017-02-22 11:53:42 -08:00
Michael du Breuil
61023fc636
NavEKF: Add GPS vertical accuracy to nav_gps_flags
2017-02-22 11:53:42 -08:00
Jacob Walser
cde1452da3
AP_Motors: Use fabsf instead of fabs
2017-02-22 11:25:18 -08:00
Jacob Walser
870183f26b
AP_TemperatureSensor: Use powf instead of pow
2017-02-22 11:25:18 -08:00
Jacob Walser
06b394bf43
AP_JSButton: Fix param metadata for relay enum values
2017-02-22 14:42:23 +00:00
Tom Pittenger
fb214ef95f
AP_Baro: fixed spelling in comment
2017-02-21 02:23:23 -08:00
Jacob Walser
8c87868b5c
AP_AHRS: Add submarine vehicle class
2017-02-21 11:26:14 +11:00
Jacob Walser
5829d4b645
AC_Avoidance: Refactor fence.get_safe_alt() to fence.get_safe_alt_max()
2017-02-21 11:26:14 +11:00
Jacob Walser
e7a34b0fb3
AP_NavEKF2: Add set_baro_alt_noise method
2017-02-21 11:26:14 +11:00
Jacob Walser
e7caf05238
AP_HAL_SITL: Add support for Sub
2017-02-21 11:26:14 +11:00
Jacob Walser
613bc46592
AP_Baro: Add support for water pressure and Sub
2017-02-21 11:26:14 +11:00
Jacob Walser
3c6df7cc0e
AC_Fence: Add minimum altitude limit
...
get_safe_alt() -> get_safe_alt_max() and get_safe_alt_min()
2017-02-21 11:26:14 +11:00
Jacob Walser
0e124d0be5
AC_PosControl: Add AC_PosControl_Sub class
2017-02-21 11:26:14 +11:00
Jacob Walser
925fa5d214
AC_AttitudeControl: Add AC_AttitudeControl_Sub class
2017-02-21 11:26:14 +11:00
Jacob Walser
ac1e1b9460
AP_NavEKF3: Add set_baro_alt_noise method
2017-02-21 11:26:14 +11:00
Jacob Walser
ca603e1517
AP_TemperatureSensor: Add AP_TemperatureSensor library and TSYS01 driver
2017-02-21 11:26:14 +11:00