Peter Barker
9e436ec35c
DataFlash: correct visibility
2017-04-12 13:42:46 +09:00
Peter Barker
25930e5bf3
DataFlash: remove unused DataFlash_MAVLink method
2017-04-12 13:42:46 +09:00
Michael du Breuil
1e816b8be5
GCS_MAVLink: Support sending the BATTERY_STATUS message
2017-04-12 10:21:49 +09:00
Andrew Tridgell
3080f66d16
GCS_MAVLink: fixes for updated mavlink
2017-04-11 20:03:43 +01:00
Grant Morphett
792bf70c40
RangeFinder: Fixed the value labels for LidarLite
...
LidarLiteV2 ---> LidarLiteV2-I2C
LidarLiteV3 ---> LidarLiteV3-I2C
2017-04-11 20:54:19 +09:00
davidaroyer
512cd11125
AP_HAL_Linux: RCOutput_ZYNQ: check for valid channel
2017-04-11 12:10:33 +01:00
Andrew Tridgell
f571b34fd7
AP_Motors: setup RC speed for tailsitters
2017-04-11 17:34:40 +10:00
Andrew Tridgell
1db3b31686
SRV_Channel: added set_rc_frequency
...
this allows for setting RC output rate of named channel types
2017-04-11 17:34:40 +10:00
Andrew Tridgell
328541769d
AP_Motors: allow control surfaces to move disarmed
...
allow tailsitter control surfaces to move in Q modes when shutdown
2017-04-11 17:34:40 +10:00
Andrew Tridgell
37301f67a0
SRV_Channel: added left and right motor tilt controls
2017-04-11 17:34:40 +10:00
Eugene Shamaev
0b54d5764c
AP_BoardConfig: support for CAN and UAVCAN at board level
2017-04-10 22:38:13 +01:00
Eugene Shamaev
dfe9b0e6fc
AP_GPS: support for UAVCAN connected GNSS receivers
2017-04-10 22:38:12 +01:00
Eugene Shamaev
3e044c7b8a
AP_Compass: support for UAVCAN connected magnetometers
2017-04-10 22:38:12 +01:00
Eugene Shamaev
331419a51e
AP_Baro: support for UAVCAN connected barometers
2017-04-10 22:38:12 +01:00
Eugene Shamaev
c43d91b92e
SRV_Channel: support for servo and ESC commands to be send via UAVCAN
2017-04-10 22:38:12 +01:00
Eugene Shamaev
68a8d8615d
AP_UAVCAN: library for support of UAVCAN protocol
2017-04-10 22:38:12 +01:00
Eugene Shamaev
7831a85f1c
AP_HAL_Linux: definitions for CAN bus
2017-04-10 22:38:12 +01:00
Eugene Shamaev
d81af8700f
AP_HAL_SITL: definitions for CAN bus
2017-04-10 22:38:12 +01:00
Eugene Shamaev
55a0bd081f
AP_HAL_PX4: ESC scaling
2017-04-10 22:38:12 +01:00
Eugene Shamaev
7caeaf4be6
AP_HAL_PX4: RCOutput support for UAVCAN
2017-04-10 22:38:12 +01:00
Eugene Shamaev
865392f034
AP_HAL_PX4: CAN bus driver
2017-04-10 22:38:12 +01:00
Eugene Shamaev
d1792689f1
AP_HAL/utility: clear added to RingBuffer
2017-04-10 21:31:07 +01:00
Eugene Shamaev
a07033f938
AP_HAL: ESC scaling
2017-04-10 21:31:07 +01:00
Eugene Shamaev
9b98c304c4
AP_HAL: top level HAL definitions for CAN bus driver
2017-04-10 21:31:07 +01:00
Andrew Tridgell
7cd290af9b
AP_HAL: added defaults offsets max for disco
2017-04-10 19:17:37 +10:00
priseborough
8250fe4943
AP_NavEKF3: fix documentation derivation references
2017-04-10 15:47:35 +09:00
Andrew Tridgell
bcec837f06
AP_BoardConfig: fixed warning in SITL build
2017-04-10 10:02:42 +10:00
Michael du Breuil
6b523cbd46
AP_GPS: Fix a memory leak in QURT GPS
...
Fixes part of #6000
2017-04-09 16:56:00 +10:00
Andrew Tridgell
3236090d71
HAL_SITL: allow plane and rover to use SIM_ENGINE_FAIL
2017-04-09 16:45:19 +10:00
Andrew Tridgell
68e0b5b7fa
SITL: support XPlane-11
...
the packets are prefixed with DATA* instead of DATA@
This makes it work with both versions
2017-04-09 16:39:26 +10:00
Andrew Tridgell
dbfdfa2261
HAL_PX4: fixed a bug in setup of alt rates for upper channels
...
this affected vehicles with high rates on upper channels, such as hexa
and octa quadplanes. The bug caused the rates set on the upper channels
to also be set on the primary channels, which means the low channels
containing aileron, elevator etc ran at 400Hz instead of 50Hz, resulting
in potential damage to the servos
2017-04-07 20:32:19 +10:00
Andrew Tridgell
a8b12dcf3c
HAL_PX4: never wait on a semaphore in interrupt context
...
this shouldn't ever happen, but better to check
2017-04-07 18:16:14 +10:00
Andrew Tridgell
1c5607b42d
AP_RPM: fixed build for aero-fc
2017-04-07 17:45:10 +10:00
Peter Barker
feb30b3b9b
DataFlash: add mutex for WritePrioritisedBlock
...
Multiple threads attempt to write blocks; don't let
them interfere
2017-04-06 22:09:18 +10:00
Peter Barker
2fa97c9906
DataFlash: improve privacy aspects of instance variables
2017-04-06 22:09:18 +10:00
Michael du Breuil
33d0fa3e82
AP_AHRS: Fix an index out of bounds
...
Coverity 137817, getPrimaryCoreIMUIndex() can return -1, which is then invalid to pass to get_delta_velocity_dt
2017-04-06 08:44:57 +10:00
Michael du Breuil
a0cb34db57
AP_Landing: Leverage new nav_controller loiter radius interface
2017-04-06 08:26:04 +10:00
Michael du Breuil
93a18e7dc8
L1: Add loiter radius scaling based upon bank limits at sea level
2017-04-06 08:26:04 +10:00
Michael du Breuil
2ac32ad204
AP_Navigation: Add a loiter radius interface
2017-04-06 08:26:04 +10:00
Michael du Breuil
336b4a64d7
AP_Navigation: Whitespace (tab/spaces inconsistency)
2017-04-06 08:26:04 +10:00
Jacob Walser
4e700ea4df
AP_JSButton: Change mode button function implementation
2017-04-05 13:29:06 -04:00
Dr.-Ing. Amilcar Do Carmo Lucas
b4260c77be
Add and update missing SITL command line usage information
2017-04-05 20:17:40 +10:00
priseborough
06c073e448
AP_NavEKF3: Update tilt alignment check
2017-04-05 20:16:16 +10:00
Andrew Tridgell
c118deccb0
AP_BoardConfig: added BRD_IO_ENABLE parameter
...
allow for px4io to be disabled completely
2017-04-05 20:14:53 +10:00
Peter Barker
3defe584e7
DataFlash: extract common labels and formats into defines
2017-04-05 19:16:21 +10:00
Peter Barker
510aa587ef
DataFlash: add validation for logging structures
2017-04-04 20:03:33 +01:00
Peter Barker
2746edfd32
DataFlash: move Init from LogFile.cpp to Dataflash.cpp (NFC)
2017-04-04 20:03:33 +01:00
Andrew Tridgell
9e2cfabb8a
AP_RPM: support RPM input on any AUX pin
2017-04-04 16:33:45 +10:00
Peter Barker
564ff3a468
GCS_MAVLink: always allow HOME to be read by MISSION_REQUEST
...
Fixes #5980
2017-04-04 15:00:07 +10:00
Andrew Tridgell
fafd940dd5
AP_Arming: use compass get_offsets_max()
2017-04-04 00:49:34 +01:00
Andrew Tridgell
ee2afd3242
AP_Compass: added COMPASS_OFFS_MAX
...
this allows setup of airframes with hatch magnets
2017-04-04 00:49:34 +01:00
Jacob Walser
98b7dac870
AP_ServoRelayEvents: Remove constraint on 'channel' value
...
This was preventing proper function of Relay #0 , and the intention of
this check was redundant
2017-04-04 09:14:07 +10:00
Andrew Tridgell
6ec32472c5
AP_Airspeed: average two readings for airspeed
...
given we're using it to check for errors, we may as well reduce analog
noise too
2017-04-04 08:40:31 +10:00
Peter Barker
724be3878c
AP_HAL_PX4: correct output of system-id on px4-v3
2017-04-03 14:14:59 +10:00
Andrew Tridgell
a11dca5229
AP_AHRS: added optional skip_ins_update to AHRS::update()
...
avoid the ins update if already done in copter fast_loop()
2017-04-03 13:04:11 +09:00
Andrew Tridgell
02976168cc
HAL_PX4: fixed RC rate when BRD_PWM_COUNT=0
...
if BRD_PWM_COUNT is zero then alt_fd is -1, and we were not setting
servo output rate
2017-04-03 10:05:30 +09:00
Andrew Tridgell
c952e58edb
AP_InertialSensor: fixed invensense driver temp reading
...
different parts have quite different zero offsets in temperature
2017-04-03 10:06:27 +10:00
Michael du Breuil
4932a8b9ef
Airspeed: Sanity check MS4525DO data, and utilize a double read
2017-04-01 11:19:39 +11:00
Sriram Sami
8bb052d019
AP_Motors: update descriptions for new parameters
2017-04-01 05:25:59 +11:00
Sriram Sami
1793bac8d4
AP_Motors: add parameters for HELI_DUAL
...
- add COL2_MIN/MID/MAX parameters that control limits of rear swashplate
- output collective_mid correctly for rear swashplate when servo is in manual mode
2017-04-01 05:25:59 +11:00
Peter Barker
d3b442d8b6
DataFlash_MAVLink: remove dead comments
2017-03-31 15:02:14 +01:00
Peter Barker
d8c475ad04
DataFlash: use override keyword on many methods
2017-03-31 15:02:14 +01:00
Andrew Tridgell
6c31a6982b
DataFlash: added Log_Write_AttitudeView
2017-03-31 11:30:44 +11:00
Andrew Tridgell
5f02b7eddb
AP_AHRS: added get_error_rp and get_error_yaw to AHRS_View
2017-03-31 11:30:44 +11:00
Peter Barker
4cb43b1c27
DataFlash: correct repeated FMT logging bug
2017-03-30 20:19:15 +11:00
Randy Mackay
dcc4f69f7c
AP_BattMonitor: confirm pec support before attempting to read voltage
...
Previously we checked PEC support continuously at 10hz. With this change PEC support (or lack of support) is determined first before we try to read from the battery. Once determined, we do not repeat the checks.
Also simplified logic to determine PEC support based on version (should have no functional effect)
Also renamed get_pec_support to check_pec_support
Also renamed _pec_confirm to _pec_confirmed
2017-03-30 10:34:45 +09:00
Randy Mackay
884892be16
AP_BattMonitor: const some temp variables
...
Also other minor changes in response to peer review
2017-03-30 10:34:45 +09:00
Tatsuya Yamaguchi
6b4a46d467
AP_BattMonitor: fix to use the return value of get_pec_support
2017-03-30 10:34:45 +09:00
Tatsuya Yamaguchi
b052f96f6c
AP_BattMonitor: check a PEC support using SpecificationInfo
2017-03-30 10:34:45 +09:00
Randy Mackay
eded4f90bb
GCS_MAVLink: timesync sends nanoseconds
2017-03-30 08:50:37 +09:00
Randy Mackay
eddd6e5681
GCS_MAVLink: only respond to timesync messages with empty tc1
...
This avoids the possibility of a timesync message storm
Also process as a common message because no vehicle information is required
Moved location of new method to bottom of cpp file
2017-03-30 08:50:37 +09:00
fnoop
fdc310fe97
GCS_MAVLink: add TIMESYNC message handler
2017-03-30 08:50:37 +09:00
Francisco Ferreira
ec5bbbd2d0
DataFlash: fix BAR2 and BAR3 message format after baro log struct changed
2017-03-30 00:42:10 +01:00
Guilherme Sousa
584890a864
AP_HAL_SITL: Fail motors with SIM_ENGINE_FAIL
2017-03-29 22:43:14 +11:00
Guilherme Sousa
204fcba8c1
SITL: Added SIM_ENGINE_FAIL to define failed motor
2017-03-29 22:39:51 +11:00
Jonathan Challinger
9979e4bbe5
AC_PrecLand: fix usage of distance_to_target
2017-03-29 14:45:56 +09:00
Jonathan Challinger
a772e1bd3d
AC_PrecLand: add parameters for camera position relative to the CG
2017-03-29 14:45:56 +09:00
Randy Mackay
8f1d122766
AC_PrecLand: add ACC_P_NSE parameter
2017-03-29 14:45:50 +09:00
Randy Mackay
5dd5c22c39
AC_PrecLand: build IRLock on all boards
2017-03-29 14:45:49 +09:00
Randy Mackay
1fb6d468c6
AC_PrecLand: non functional changes including adding comments
2017-03-29 14:45:38 +09:00
Jonathan Challinger
2a29d7fedd
AC_PrecLand: rework estimation, add EST_TYPE param
2017-03-29 14:36:22 +09:00
Jacob Walser
1ad10d0903
AP_JSButton: Add button function to toggle between forward/lateral and
...
roll/pitch adjustment
2017-03-28 16:04:36 -04:00
Jacob Walser
b70ec54083
AP_JSButton: Fix indices in comment
2017-03-28 15:20:40 -04:00
Jacob Walser
ea054e322b
AP_JSButton: Add servo min/max functions
2017-03-28 14:54:23 -04:00
Jacob Walser
ca651ea8fa
AP_JSButton: Add buttons for servo adjustments
2017-03-28 14:54:23 -04:00
Michael du Breuil
16433cbf7a
DataFlash: Log the ground temperature used for baro calculations
2017-03-28 11:25:46 +11:00
Michael du Breuil
c37209a8d5
AP_Baro: Limit ground temperature used for the altitude
...
Fix an incorrect EAS2TAS that was double counting altitude
2017-03-28 11:25:46 +11:00
Andrew Tridgell
1ad5e1db4e
AP_Motors: integrate AP_MotorsHeli_Dual
...
fixed issues with combining with Heli_Single
2017-03-25 16:22:10 +11:00
Fredrik Hedberg
998231ab0d
AP_Motors: added AP_MotorsHeli_Dual
...
for tandem and transverse helis
2017-03-25 16:22:10 +11:00
Andrew Tridgell
47803e73e4
AP_Param: allow for dynamic var_info tables
...
this allows the var_info entry in a table to be a constant pointer,
allowing the selection of a type for a parameter class at runtime.
2017-03-25 16:22:10 +11:00
Randy Mackay
c1a25c25f7
AC_Fence: return failure message
2017-03-25 10:50:58 +09:00
Randy Mackay
8171645876
AC_Fence: pre-arm check requires GPS if polygon fence enabled
2017-03-25 10:50:58 +09:00
Randy Mackay
69925d8b27
AP_Arming: shorten Accels failure message
...
This allow the message to fit on the MP HUD
2017-03-25 10:50:58 +09:00
Jonathan Challinger
c7a73e84d6
AP_NavEKF3: apply height innovation floor only when barometer is in use
2017-03-24 14:42:36 -07:00
Jonathan Challinger
c53125f3b5
AP_NavEKF2: apply height innovation floor only when barometer is in use
2017-03-24 14:42:36 -07:00
Lucas De Marchi
5809e2465b
AP_RPM: replace board ifdef with feature ifdef
2017-03-24 12:06:19 +11:00
Lucas De Marchi
f91d23daab
AP_HAL: add HAL_PX4_HAVE_PWM_INPUT
2017-03-24 12:06:19 +11:00
Lucas De Marchi
7c246847de
AP_HAL_PX4: replace board ifdef with feature ifdef
2017-03-24 12:06:19 +11:00
Lucas De Marchi
7ca9c7a443
AP_HAL: add HAL_HAVE_SAFETY_SWITCH
2017-03-24 12:06:19 +11:00
Lucas De Marchi
ef1672befc
AP_BoardConfig: replace board ifdef with feature ifdef
2017-03-24 12:06:19 +11:00