Andrew Tridgell
6f54eef857
AP_Motors: force roll motors to 0 in tailsitter when disarmed
2017-04-14 13:01:48 +10:00
Andrew Tridgell
f571b34fd7
AP_Motors: setup RC speed for tailsitters
2017-04-11 17:34:40 +10:00
Andrew Tridgell
328541769d
AP_Motors: allow control surfaces to move disarmed
...
allow tailsitter control surfaces to move in Q modes when shutdown
2017-04-11 17:34:40 +10:00
Sriram Sami
8bb052d019
AP_Motors: update descriptions for new parameters
2017-04-01 05:25:59 +11:00
Sriram Sami
1793bac8d4
AP_Motors: add parameters for HELI_DUAL
...
- add COL2_MIN/MID/MAX parameters that control limits of rear swashplate
- output collective_mid correctly for rear swashplate when servo is in manual mode
2017-04-01 05:25:59 +11:00
Andrew Tridgell
1ad5e1db4e
AP_Motors: integrate AP_MotorsHeli_Dual
...
fixed issues with combining with Heli_Single
2017-03-25 16:22:10 +11:00
Fredrik Hedberg
998231ab0d
AP_Motors: added AP_MotorsHeli_Dual
...
for tandem and transverse helis
2017-03-25 16:22:10 +11:00
Jacob Walser
507b461388
AP_Motors: Initialize throttle range directly
...
This was causing SITL to hang at boot when motors object is statically allocated.
2017-02-28 22:34:35 -08:00
Lucas De Marchi
ade1876318
AP_Motors: tie esc scaling with set_throttle_range()
...
We need to update the esc scaling from inside the Motors library, that
has access to the MOT_PWM_[MIN|MAX] values. Otherwise even though the
AP_Motors library honors the value for calculations, the RCOutput
drivers that need the scaling to set the real HW scaling will not work.
Right now it scales the value using the throttle_channel's min/max, even
though AP_Motors may be passing values in other range.
2017-02-26 13:38:24 +11:00
Jacob Walser
cde1452da3
AP_Motors: Use fabsf instead of fabs
2017-02-22 11:25:18 -08:00
Rustom Jehangir
237ba87ca4
AP_Motors: New AP_Motors6DOF used by Sub
2017-02-21 11:26:14 +11:00
Andrew Tridgell
83d055eceb
AP_Motors: support twin-motor tailsitters
...
use differential thrust for roll
2017-02-18 17:26:43 +11:00
Andrew Tridgell
ac2a9c4b4a
AP_Motors: allow Copter to fly the tailsitter motors class
2017-02-18 17:26:43 +11:00
Andrew Tridgell
1a74b7fc0c
AP_Motors: started on tailsitter support
2017-02-18 17:26:43 +11:00
Andrew Tridgell
108cbe1dab
AP_Motors: mark tricopter yaw as tricopter only
2017-02-14 19:50:01 +11:00
Andrew Tridgell
2187417d74
AP_Motors: added MOT_SPOOL_TIME
...
this allows for quadplanes to have faster spoolup, which can help with
transitions
2017-02-14 09:23:17 +09:00
Randy Mackay
8b5aae37e0
AP_Motors: remove Hexa-H, change Octa-H factors
...
Octa-H is like an Quad-X but with each side having two additional motors placed between the front an back motors.
Octa-H is quite different from Quad-H.
2017-02-10 10:42:14 +09:00
Randy Mackay
872e0567be
AP_Motors: add H frame support for hexa and octa
2017-02-09 12:37:14 +09:00
Randy Mackay
a14265359f
Copter: reduce default MOT_THST_HOVER to 0.35
2017-02-07 11:20:25 +09:00
Andrew Tridgell
af44e9fdbd
AP_Motors: added frame type 11 for Y6 to match FireFly6
...
using same motor output mapping as AvA
2017-02-06 16:18:58 +11:00
murata
92eb179acf
AP_Motors: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Andrew Tridgell
a6ecb94d24
AP_Motors: MotorsTri does not need its own var_info now
2017-01-20 12:05:09 +11:00
Andrew Tridgell
8e3bf71aa9
AP_Motors: allow single, tri and coax to be part of multicopter class
2017-01-12 17:39:37 +11:00
Andrew Tridgell
8799094278
AP_Motors: use SRV_Channel for tri tail servo
2017-01-12 17:39:37 +11:00
Andrew Tridgell
638f1364be
AP_Motors: adapt to new RC_Channel API
2017-01-12 17:39:37 +11:00
Randy Mackay
bdfb12123f
AP_Motors: fix frame-type enum for Y6B
...
Also remove unused NEW_PLUS
2016-12-31 10:55:23 +09:00
Randy Mackay
037e411e35
AP_Motors: fix example sketch
...
Also minor formatting fix
Thanks to OXINARF for spotting this
2016-12-31 10:55:23 +09:00
Randy Mackay
ffa6d1a5b9
AP_Motors: init fixes for frame_class, type and initialised_ok
...
Thanks to OXINARF for spotting these
2016-12-31 10:55:23 +09:00
Randy Mackay
a276f5dc90
AP_Motors: fix example sketch
2016-12-31 10:55:23 +09:00
Randy Mackay
7be0f437a9
AP_Motors: consolidate matrix multicopters
...
AP_MOTORS_x_FRAME definitions moved to motor_frame_type enum
init function and now accepts frame-class and type to perform initial motor setup
set_frame_class_and_type allows real-time changing of motor setup
initialised_ok flag and accessor records whether setup was successful
2016-12-31 10:55:23 +09:00
Randy Mackay
41189758b8
AP_Motors: move some functions to protected
...
Also minor formatting fix
2016-12-31 10:55:23 +09:00
priseborough
509709ce9d
AP_Motors: remove unused EKF1 include
2016-12-19 08:07:11 +11:00
Randy Mackay
2da7ea746b
MotorsHeli: minor formatting updates
2016-12-14 13:21:59 +09:00
Leonard Hall
a09d4db4fd
AP_MotorsMulticopter: fix battery resistance calculation
2016-12-14 11:07:29 +09:00
Pierre Kancir
8ef5067e12
AP_Motors: MotorsHeli_Single utilize an explicit type cast to avoid the loss of a fractional part.
2016-12-06 06:25:15 -08:00
Andrew Tridgell
8468add63e
AP_Motors: mark PWM_TYPE as reboot required
2016-11-30 10:53:26 +11:00
Andrew Tridgell
ce517384e1
AP_Motors: support MODE_PWM_BRUSHED16KHZ
2016-11-30 10:53:26 +11:00
Jonathan Challinger
22517422f9
AP_Motors: add option to disable motor PWM output while disarmed
2016-11-21 10:49:21 +09:00
Peter Barker
06b616f761
AP_Motors: add missing parameter metadata
2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Leonard Hall
bead957a78
AP_MotorsMulticopter: limit hover throttle
2016-10-15 11:27:53 +09:00
Andrew Tridgell
7cd7f03d56
AP_Motors: fixed use of trim on heli servos
...
this was broken by the servo range 0 to 1 changes
2016-10-13 09:34:48 +11:00
Lucas De Marchi
ae53920e5b
build: don't build examples with old build system
...
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file. Having the makefiles
there is misleading since people try to build and realize the build is
broken.
2016-10-11 13:03:08 +11:00
Leonard Hall
0a56d69d54
AP_MotorsMulticopter: Use same throttle value used by motors
2016-10-10 16:40:08 +09:00
Randy Mackay
b63666d188
AP_Motors: increase MOT_THST_HOVER parameter description range
...
No functional change
2016-09-07 15:28:49 +09:00
Randy Mackay
4858afae6c
AP_Motors: param description update that MOT_SPIN_MIN should be higher than MOT_SPIN_ARM
2016-09-03 11:12:31 +09:00
Andrew Tridgell
e9e3a3f491
AP_Motors: added get_pwm_type()
2016-08-29 15:52:21 +10:00
Andrew Tridgell
270fa95a8d
AP_Morors: scale colyaw to match previous behaviour
...
this was missed in the motor scaling changes. Thanks to Rob for
noticing this.
2016-08-10 07:58:06 +10:00
Randy Mackay
ad697243b3
AP_MotorsMulticopter: initialise some members
...
This resolves some Covarity warnings at the cost of a small amount of flash
2016-08-08 13:31:30 +09:00
Andrew Tridgell
66c4995c9d
AP_Motors: added get_desired_spool_state()
2016-08-04 09:43:40 -07:00
Andrew Tridgell
11975223dd
AP_Motors: added H_RSC_POWER_NEGC and H_RSC_SLEWRATE
...
this gives more control over throttle for petrol
helis. H_RSC_POWER_NEGC allows for a asymmetric V-curve, which allows
for less power being put into the head when landing or when sitting on
the ground. That can lead to significantly less vibration and chance
of ground oscillation. A heli not being flown with aerobatics does not
need to use high throttle at negative collective pitch.
The H_RSC_SLEWRATE allows for a maximum throttle slew rate to be
set. Some petrol motors can cut if the throttle is moved too
quickly. We had this happen at a height of 6m when switching from
ALT_HOLD to STABILIZE mode. It also lowers the chance of the blades
skewing in their holders with the sudden change of power when the heli
is disarmed. In general it is a bad idea to do instantaneous large
movements of a IC engine throttle.
2016-07-03 18:29:05 +10:00
Andrew Tridgell
bc7488e2f2
AP_Motors: fixed typos
2016-07-01 15:35:29 +10:00
Leonard Hall
fe68fe65e2
AP_Motors: Single and Coax fix flap gains
2016-07-01 12:45:14 +09:00
Leonard Hall
ba2382c409
AP_MotorsCoax: Fix servo 3 and 4 feed through sign
2016-06-20 09:45:17 +09:00
Andrew Tridgell
7a9b4c7572
AP_Motors: fixed motor load calculation
...
scale to 1.0 for max collective
2016-06-19 13:50:04 +10:00
Randy Mackay
e185bab775
AP_MotorsMulticopter: add HOVER_LEARN option to learn but not save
2016-06-18 11:55:49 +09:00
Randy Mackay
23f8227e36
AP_Motors: bug fix to save params on disarm
...
Previously was saving during arming as well as disarming.
Thanks to OXINARF for finding this!
2016-06-18 11:55:49 +09:00
Randy Mackay
a2ffd9ec7d
AP_MotorsMulticopter: fix comment for get_throttle_limit function
2016-06-18 11:55:49 +09:00
Randy Mackay
a1b573ed0a
AP_Motors: rename throttle_ave_max to throttle_avg_max
2016-06-18 11:55:49 +09:00
Randy Mackay
ef106e4b0f
AP_Motors: spool_mode moved out of flags struction
...
No functional change
2016-06-18 11:55:49 +09:00
Leonard Hall
8fff32bde3
AP_MotorsSingle: fix stability patch use of throttle_hover
2016-06-18 11:55:49 +09:00
Leonard Hall
e0f9fc8e40
AP_MotorsSingle: rename rpy_scale, thrust_min_rpy variables
...
No functional change
2016-06-18 11:55:49 +09:00
Leonard Hall
da05902805
AP_MotorsCoax: fix stability patch use of throttle_hover
2016-06-18 11:55:49 +09:00
Leonard Hall
9bc866e771
AP_MotorsCoax: rename rpy_scale internal variable
...
No functional change
2016-06-18 11:55:49 +09:00
Leonard Hall
8bdb906b2b
AP_MotorsCoax: fixes negative thrust
2016-06-18 11:55:49 +09:00
Randy Mackay
71d1818103
AP_MotorsMulticopter: minor comment update
2016-06-18 11:55:49 +09:00
Randy Mackay
818965fa57
AP_MotorsMulticopter: output_to_motors and output_logic become protected
2016-06-18 11:55:49 +09:00
Leonard Hall
02881b59ff
AP_MotorsMulti: float constants
2016-06-18 11:55:49 +09:00
Randy Mackay
79a73a5c2f
AP_Motors: fix example sketch
...
No need to set throttle_mix nor throttle_min
2016-06-18 11:55:49 +09:00
Leonard Hall
bee6c29b89
AP_MotorsMulticopter: current limit keeps battery from sagging below BAT_VOLT_MIN
2016-06-18 11:55:49 +09:00
Leonard Hall
be25ac4acf
AP_MotorsMulticopter: Add current limit time constant variable
2016-06-18 11:55:49 +09:00
Leonard Hall
7e0e0ca874
AP_MotorsMulticopter: battery voltage compensation improvements
2016-06-18 11:55:49 +09:00
Leonard Hall
0ee7b00b0b
AP_MotorsMulticopter: rename _thrust_curve_min to spin_min
2016-06-18 11:55:49 +09:00
Leonard Hall
142a67bb6d
AP_MotorsMulticopter: minor comment change
2016-06-18 11:55:49 +09:00
Leonard Hall
5cace33ca5
AP_MotorsMulticopter: SPIN_MIN replaces min_throttle
2016-06-18 11:55:49 +09:00
Leonard Hall
2c811364d3
AP_MotorsMulticopter: SPIN_ARM param replaces SPIN_ARMED
2016-06-18 11:55:49 +09:00
Leonard Hall
488f90b39d
AP_Motors: add calc_spin_up_to_pwm to reduce repeated code
2016-06-18 11:55:49 +09:00
Randy Mackay
25778a24e2
AP_MotorsMulticopter: add HOVER_LEARN param
2016-06-18 11:55:49 +09:00
Leonard Hall
4f0db2bc36
AP_Motors: learned THST_HOVER replace THR_MID
...
This holds the estimated thrust required for the vehicle to hover
expressed as a number from 0 to 1. 0 will be equivalent to outputting
SPIN_MIN (which is a number from 0~1 but in the full output range) and 1 is equivalent to SPIN_MAX (also 0~1 but in the full output range)
2016-06-18 11:55:49 +09:00
Leonard Hall
5a8fc6283e
AP_Motors: replace throttle_rpy_mix with throttle_avg
...
AC_AttitudeControl now calculates throttle vs attitude control
prioritisation and simply provides overall maximum throttle (aka
throttle_avg) to the motors library
2016-06-18 11:55:49 +09:00
Andrew Tridgell
255bda9f9c
AP_Motors: allow setting of loop rate
...
this allows for SCHED_LOOP_RATE in copter
2016-06-17 15:01:18 +10:00
Leonard Hall
b3fcab8044
AP_Motors: minor comment fix
2016-06-09 09:49:00 +09:00
Andrew Tridgell
f58d837026
AP_Motors: fixed heli RSC output range and float conversion
...
adds H_RSC_PWM_MIN, H_RSC_PWM_MAX and H_RSC_PWM_REV
2016-06-04 18:33:36 +10:00
Leonard Hall
a16018f9fe
AP_Motors: Missed Single fix
2016-05-31 12:44:17 +10:00
Leonard Hall
d67f83559c
AP_Motors: Single and Coax Fixes
2016-05-29 16:12:29 +10:00
Randy Mackay
72b86a3f99
AP_Motors: remove unused stabilizing flag
...
Also initialise some members to resolve converity warnings
2016-05-28 15:45:29 +09:00
Andrew Tridgell
a2ed8fb313
AP_Motors: prevent negative thrust
...
this prevents a sqrt of a negative number
2016-05-26 17:09:11 +10:00
Andrew Tridgell
6855899cbf
AP_Motors: fixed servo constructor for coax
2016-05-26 16:41:16 +10:00
Andrew Tridgell
4e5e301c4e
AP_Motors: fixed servo constructor for heli
2016-05-26 16:41:06 +10:00
Andrew Tridgell
f9fb098222
AP_Motors: fixed channel output for SingleCopter
2016-05-26 16:26:43 +10:00
Andrew Tridgell
65eb9ceb32
AP_Motors: expose min/max pwm
2016-05-26 14:33:57 +10:00
Andrew Tridgell
a44b0e0011
AP_Motors: don't setup oneshot for a zero output mask
2016-05-26 12:18:49 +10:00
Fredrik Hedberg
75d5c87788
AP_Motors: Fix setpoint bug with 0~1 conversion in AP_MotorsHeli
2016-05-25 09:27:40 +09:00
Randy Mackay
8d1f50e78f
AP_Motors: rename get_pwm_min to get_pwm_output_min
2016-05-24 10:00:25 +09:00
Randy Mackay
0c225cf498
AP_MotorsMulticopter: fix typo in comments
2016-05-24 10:00:25 +09:00
Randy Mackay
ff93524ba4
AP_Motors: rename MOT_THST_MAX to MOT_SPIN_MAX
...
Also renamed:
MOT_THST_BAT_MIN,MAX to MOT_BAT_VOLT_MIN,MAX
MOT_CURR_MAX to MOT_BAT_CURR_MAX
2016-05-24 10:00:25 +09:00
Randy Mackay
f1cbdbe914
AP_Motors: update some comments
2016-05-24 10:00:25 +09:00
Randy Mackay
49b14b3cb6
AP_Motors: add PWM_MIN, MAX
...
These parameters allow the motor PWM output range to be different from receiver's throttle input range
Also renamed throttle_pass_through to set_throttle_passthrough_for_esc_calibration and change the method's input to the 0 to 1 range instead of direct PWM value
2016-05-24 10:00:25 +09:00
Ricardo de Almeida Gonzaga
2802775e7d
AP_Motors: Fix typos
2016-05-13 19:20:06 -03:00
Andrew Tridgell
60b3625950
AP_Motors: added hook for vehicle based thrust compensation
...
allow vehicle code to compensate for thrust effectiveness changes due
to properties outside the scope of AP_Motors. This allows for
compensation in tiltrotors and tiltwings.
2016-05-11 05:55:23 +10:00
Andrew Tridgell
37d6b5fdaf
AP_Motors: added output_motor_mask()
...
this will be used for tiltrotors in forward flight
2016-05-11 05:55:23 +10:00
dgrat
41661f815f
AP_Math: Replace the pythagorous* functions with a variadic template
...
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
skyscraper
de5130fa13
AP_Motors: RC_Channel refactor
...
More fixing up of RC_Channel change access to
data members to functions
2016-05-10 16:21:16 +10:00
skyscraper
daec4ea10e
AP_Motors: Fix up after RC_Channels refactor
...
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to get and set functionsss
old public member(int16_t) get function -> int16_t set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in c.get_radio_in() c.set_radio_in(v)
c.control_in c.get_control_in() c.set_control_in(v)
c.servo_out c.get_servo_out() c.set_servo_out(v)
c.pwm_out c.get_pwm_out() // use existing
c.radio_out c.get_radio_out() c.set_radio_out(v)
c.radio_max c.get_radio_max() c.set_radio_max(v)
c.radio_min c.get_radio_min() c.set_radio_min(v)
c.radio_trim c.get_radio_trim() c.set_radio_trim(v);
c.min_max_configured() // return true if min and max are configured
Because data members of RC_Channels are now private and so cannot be written directly
some overloads are provided in the Plane classes to provide the old functionality
new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);
new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;
Rename functions
RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)
RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)
Rationale:
RC_Channel is a complicated class, which combines
several functionalities dealing with stick inputs
in pwm and logical units, logical and actual actuator
outputs, unit conversion etc, etc
The intent of this PR is to clarify existing use of
the class. At the basic level it should now be possible
to grep all places where private variable is set by
searching for the set_xx function.
(The wider purpose is to provide a more generic and
logically simpler method of output mixing. This is a small step)
2016-05-10 16:21:15 +10:00
Randy Mackay
e41f798ba1
AP_Motors: remove unused set_stabilizing
2016-05-07 10:08:36 +09:00
Andrew Tridgell
ff96085bd3
AP_Motors: allow arbitrary motor mapping with tricopters
2016-04-28 22:36:41 +10:00
Randy Mackay
7af9892bd1
AP_MotorsMatrix: make const a float
...
resolves compiler warning
2016-04-23 23:06:25 -07:00
Randy Mackay
72a7f674ec
AP_Motors: protect against out-of-bounds memory access
...
resolves a compiler warning
2016-04-23 21:06:18 +10:00
Andrew Tridgell
fd7c87e629
AP_Motors: allow enabling oneshot on a subset of motors
2016-04-22 13:24:04 +10:00
Andrew Tridgell
f2c63e24c5
AP_Motors: allow tricopter motor 7 to be moved to any output
2016-04-22 08:32:03 +10:00
Andrew Tridgell
6df4d11d3f
AP_Motors: ensure OneShot125 is within 125 to 250usec
2016-04-16 18:52:12 +10:00
Andrew Tridgell
fe2065cd72
AP_Motors: rename MOT_PWM_MODE to MOT_PWM_TYPE
...
Randy prefers TYPE
2016-04-14 08:05:07 +10:00
Andrew Tridgell
f54bcc6c7f
AP_Motors: added oneshot support via MOT_PWM_MODE
...
MOT_PWM_MODE=0 is normal
MOT_PWM_MODE=1 is oneshot
MOT_PWM_MODE=2 is oneshot125
2016-04-14 08:05:05 +10:00
Randy Mackay
8d77bdec15
AP_MotorsMulti: minor comment fix
2016-04-14 05:45:24 +09:00
Randy Mackay
f6eabfdab2
AP_MotorsMulticopter: formatting fixes
2016-04-01 11:59:30 +09:00
Randy Mackay
6807b961e2
AP_MotorsMulticopter: protect against div-by-zero if MOT_SPIN_ARMED is zero
2016-04-01 11:59:30 +09:00
Randy Mackay
b39798ad90
AP_Motors: remove unused DESIRED_SPIN_MIN_THROTTLE
2016-04-01 11:59:30 +09:00
Randy Mackay
dc86e1472c
AP_MotorsTri: protect against div-by-zero if MOT_YAW_SV_ANGLE param was set to 90
2016-04-01 11:59:30 +09:00
Randy Mackay
9b5b6f3779
AP_MotorsHeli: constrain filtered throttle
...
This is required because we have removed the constraint on the throttle input. This also insures that there is no lag caused by the filtered throttle straying far outside the 0 to 1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
b4a61e6ccf
AP_Motors: remove constrain on throttle input
...
This constraint is redundant because we already constrain the filtered throttle
2016-04-01 11:59:30 +09:00
Leonard Hall
fce426409e
AP_MotorsTri: fix stab patch
2016-04-01 11:59:30 +09:00
Randy Mackay
49562c5ca3
AP_MotorsMulticopter: reduce num bits used for spool-up-down-mode
2016-04-01 11:59:30 +09:00
Randy Mackay
3ee88fd8c7
AP_MotorsCoax: remove output_min
...
This is now implemented by parent AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Randy Mackay
8566a61660
AP_MotorsSingle: remove output_min
...
This is now implemented by parent AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Randy Mackay
8621774040
AP_MotorsTri: remove output_min
...
This is now implemented by parent AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Randy Mackay
f4d94806e5
AP_MotorsMatrix: remove output_min
...
This is now implemented by parent AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Randy Mackay
b4b33db79b
AP_MotorsMulticopter: promote output_min from Matrix class
2016-04-01 11:59:30 +09:00
Randy Mackay
2e8acf1f74
AP_MotorsHeli: calculate_scalars made protected
...
No functional change
2016-04-01 11:59:30 +09:00
Randy Mackay
bc1b8f415a
AP_Motors: example sketch output limit flags
2016-04-01 11:59:30 +09:00
Randy Mackay
c9055ccdb1
AP_Motors: example sketch tests Single and Coax
2016-04-01 11:59:30 +09:00
Randy Mackay
41c55ffbe7
AP_MotorsTri: use YAW_SV_REV to reverse yaw output
2016-04-01 11:59:30 +09:00
Leonard Hall
13d727c2c6
AP_MotorsTri: add YAW_SV_ANGLE parameter to capture yaw servo lean angle max
2016-04-01 11:59:30 +09:00
Randy Mackay
c939cc1551
AP_MotorsTri: clarify YAW_SV parameter descriptions and comments
2016-04-01 11:59:30 +09:00
Leonard Hall
267513d864
AP_MotorsTri: fixes to output_armed_stabilizing
...
Also minor comment fixes
2016-04-01 11:59:30 +09:00
Leonard Hall
250a444e57
AP_MotorsCoax: fixes to stab patch
...
Fix throttle_lower flag
Also some formatting changes
2016-04-01 11:59:30 +09:00
Randy Mackay
20565580ed
AP_MotorsCoax: remove disabling of output ch7
2016-04-01 11:59:30 +09:00
Randy Mackay
63fefae7cf
AP_MotorsCoax: use calc_pwm_output_1ot1 instead of local calc_pivot_radio_output
2016-04-01 11:59:30 +09:00
Leonard Hall
840e60c930
AP_MotorsSingle: fixes to stab patch
...
Fixes throttle_lower flag
Also some formatting changes
2016-04-01 11:59:30 +09:00
Randy Mackay
af9b18329c
AP_MotorsSingle: use calc_pwm_output_1to1 instead of local calc_pivot_radio_output
2016-04-01 11:59:30 +09:00
Randy Mackay
c4b88aafef
AP_MotorsHeli: swash and tail servo objects moved into class
2016-04-01 11:59:30 +09:00
Randy Mackay
4f1e62d551
AP_MotorsHeli: remove reset_radio_passthrough
2016-04-01 11:59:30 +09:00
Randy Mackay
b5593431bf
AP_MotorsHeli_Single: replace collective_mid_pwm with collective_mid_pct
2016-04-01 11:59:30 +09:00
Randy Mackay
9790245bf1
AP_MotorsHeli: replace collective_mid_pwm with collective_mid_pct
2016-04-01 11:59:30 +09:00
Randy Mackay
a39bbc5421
AP_MotorsHeli: servo_test in range -1 to 1
2016-04-01 11:59:30 +09:00
Randy Mackay
a42706bdcc
AP_Motors: remove unused example sketch to test timing
...
This test was only important on the slower AVR boards
2016-04-01 11:59:30 +09:00
Randy Mackay
a3450b712c
AP_Motors: fix example sketch
2016-04-01 11:59:30 +09:00
Leonard Hall
753b72b28c
AP_MotorsY6: call normalise_rpy_factors in motor setup
2016-04-01 11:59:30 +09:00
Leonard Hall
13ab3ecfea
AP_MotorsQuad: call normalise_rpy_factors in motor setup
2016-04-01 11:59:30 +09:00
Leonard Hall
7ac4fc5569
AP_MotorsOctaQuad: call normalise_rpy_factors in motor setup
2016-04-01 11:59:30 +09:00
Leonard Hall
e182c10625
AP_MotorsOcta: call noramlise_rpy_factors in motor setup
2016-04-01 11:59:30 +09:00
Leonard Hall
733b89cf3c
AP_MotorsHexa: call noramlise_rpy_factors in motor setup
2016-04-01 11:59:30 +09:00
Leonard Hall
8f8eb7e214
AP_MotorsMatrix: add normalise_rpy_factors
2016-04-01 11:59:30 +09:00
Randy Mackay
e7ba5ae451
AP_MotorsMulticopter: fix get_hover_throttle_as_high_end_pct
2016-04-01 11:59:30 +09:00
Randy Mackay
4514e8d100
AP_MotorsHeli: remove slow_start
2016-04-01 11:59:30 +09:00
Randy Mackay
c41a5dc3bd
AP_MotorsMulticopter: remove slow_start
...
This has been replaced with the spool logic feature
2016-04-01 11:59:30 +09:00
Randy Mackay
b436dde60c
AP_Motors: remove slow_start
...
This has been replaced with the spool logic feature
2016-04-01 11:59:30 +09:00
Randy Mackay
e863f0b9c0
AP_MotorsHeli: use AP_Motors set_radio_passthrough in 0 to 1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
68a6408a23
AP_MotorsMulticopter: remove set_radio_passthrough
...
This has been moved up to the AP_Motors class
2016-04-01 11:59:30 +09:00
Randy Mackay
5ba3a6c536
AP_Motors: add set_radio_passthrough
2016-04-01 11:59:30 +09:00
Randy Mackay
fe4733121d
AP_MotorsHeli_Single: ext_gyro_gain in 0 to 1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
e1e4e37c92
AP_MotorsHeli_Single: use RSC class's get_idle_output function
...
No functional change
2016-04-01 11:59:30 +09:00
Randy Mackay
2cdc5da226
AP_MotorsHeli_Single: rotor speed functions in 0 to 1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
68945df45d
AP_MotorsHeli_Single: write_aux uses 0 to 1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
b3334c3ae5
AP_MotorsHeli: rotor speed function in 0 to 1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
832a226f13
AP_MotorsHeli_RSC: rotor speeds in 0 to 1 range
...
Also move recalc_scalers functionality into update_rotor_ramp and update_rotor_runup
2016-04-01 11:59:30 +09:00
Randy Mackay
4775843e3c
AP_MotorsHeli_RSC: add get_idle_output accessor
2016-04-01 11:59:30 +09:00
Randy Mackay
a63dba5b13
AP_MotorsHeli_Single: servo_test becomes protected
2016-04-01 11:59:30 +09:00
Randy Mackay
cefd114964
AP_MotorsHeli_Single: remove unused accessors for tail_type, ext_gyro_gain, phase_angle
2016-04-01 11:59:30 +09:00
Randy Mackay
f2fc39943e
AP_MotorsHeli_Single: remove unused delta_phase_angle
2016-04-01 11:59:30 +09:00
Randy Mackay
381f538aca
AP_HotorsHeli_Single: remove unused definition
2016-04-01 11:59:30 +09:00
Randy Mackay
27fed39671
AP_MotorsHeli_Single: remove roll_scalar, pitch_scalar
2016-04-01 11:59:30 +09:00
Randy Mackay
756236af35
AP_MotorsHeli: remove unused delta_phase_angle
2016-04-01 11:59:30 +09:00
Randy Mackay
16ac92be82
AP_MotorsHeli: remove unused definitions
2016-04-01 11:59:30 +09:00
Randy Mackay
aeef6692cb
AP_MotorsHeli: remove unused roll_scalar, pitch_scalar, collective_range
2016-04-01 11:59:30 +09:00
Randy Mackay
1a690772e1
AP_Motors: example sketch outputs headers
2016-04-01 11:59:30 +09:00
Randy Mackay
361b64f817
AP_Motors: example sketch uses AP_Motors set_desired_spool_state
2016-04-01 11:59:30 +09:00
Randy Mackay
d4998089c8
AP_Motors: example sketch provides roll, pitch, yaw in -1 to +1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
93597d152f
AP_Motors: example sketch can test helicopter
2016-04-01 11:59:30 +09:00
Randy Mackay
47873c1d34
AP_MotorsHeli: fix RSC_SETPOINT param description
2016-04-01 11:59:30 +09:00
Randy Mackay
bcbe6b279e
AP_MotorsHeli: explicitely set ServoControlModes enum
...
Non functional change but this enum is tied to a parameter value so the exact value is important
2016-04-01 11:59:30 +09:00
Randy Mackay
8febcedf4b
AP_MotorsHeli: remove unnecessary static declaration
2016-04-01 11:59:30 +09:00
Randy Mackay
f022e504b0
AP_MotorsHeli: remove unused get_collective_mid and out methods
2016-04-01 11:59:30 +09:00
Randy Mackay
a18722a2fc
AP_MotorsHeli: output_min uses new move_actuators in -1 to +1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
1197a439af
AP_MotorsHeli: move_actuators to -1 to +1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
8057d2fc58
AP_MotorsMatrix: remove unnecessary virtual declarations
2016-04-01 11:59:30 +09:00
Randy Mackay
71866be652
AP_MotorsHeliSingle: move_yaw in -1 to +1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
f6120b801b
AP_MotorsHeliSingle: move_actuators in -1 to +1 range
2016-04-01 11:59:30 +09:00
Randy Mackay
61cf8e1698
AP_Motors: add calc_pwm_output_1to1 and 0to1
...
Convenience functions to convert from -1 to +1 input to pwm output
2016-04-01 11:59:30 +09:00
Randy Mackay
56f05e6a96
AP_Motors: add set_desired_spool_state
2016-04-01 11:59:30 +09:00
Randy Mackay
2716126e40
AP_MotorsMulticopter: use desired_spool from AP_Motors class
2016-04-01 11:59:30 +09:00
Randy Mackay
93d1f1969c
AP_MotorsMulticopter: remove set_desired_spool_state
...
This is being moved to AP_Motors
2016-04-01 11:59:30 +09:00
Randy Mackay
4dd4d38b9b
AP_MotorsMulticopter: fix output_to_motors definition
2016-04-01 11:59:30 +09:00
Randy Mackay
3ae9b606ff
AP_Motors: remove unnecessary output_to_motors declaration
...
This is declared down in the AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Randy Mackay
f2ff9e34ad
AP_Motors: remove output_armed_zero_throttle
2016-04-01 11:59:30 +09:00
Leonard Hall
879e12ba43
AP_MotorsHeli_Single: roll, pitch, yaw input in -1 to +1 range
2016-04-01 11:59:30 +09:00
Leonard Hall
97f0b00e3e
AP_MotorsHeli: roll, pitch, yaw input in -1 to +1 range
2016-04-01 11:59:30 +09:00
Leonard Hall
b701c109cf
AP_MotorsSingle: roll, pitch, yaw input in -1 to +1 range
2016-04-01 11:59:30 +09:00
Leonard Hall
1a308c2eb8
AP_MotorsCoax: roll, pitch, yaw input in -1 to +1 range
2016-04-01 11:59:30 +09:00
Leonard Hall
4d208fcd47
AP_MotorsTri: roll, pitch, yaw input in -1 to +1 range
2016-04-01 11:59:30 +09:00
Leonard Hall
027284fba0
AP_MotorsMatrix: roll, pitch, yaw input in -1 to +1 range
2016-04-01 11:59:30 +09:00