bnsgeyer
7e8c2a3e83
AP_Motors: Tradheli-corrected get_motor_mask method
2018-08-01 15:03:54 +09:00
bnsgeyer
abdb1e07c5
AP_Motors: convert heli code to use SRV_Channels
...
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations. This change also
fixed servo initialization conflicts.
Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
2018-08-01 15:03:51 +09:00
bnsgeyer
b728e781a7
SRV_Channel: fixes channel numbering for channel already assigned message
2018-08-01 15:03:46 +09:00
bnsgeyer
7c498b8978
SRV_Channel: modified set_output_pwm_trimmed for reverse property
...
Modified function to account for servo reverse property
2018-08-01 15:03:43 +09:00
Andrew Tridgell
28e66c95bc
SRV_Channel: added function based set_output_min_max
...
this is for a conversion of AP_Motors heli code to servo functions
2018-08-01 15:03:40 +09:00
Andrew Tridgell
b4bd0adfad
HAL_ChibiOS: account for I2C base in compass masks
2018-07-31 14:26:56 +10:00
Andrew Tridgell
630dc96d0b
HAL_ChibiOS: fixed internal i2c mask for Pixracer
2018-07-31 14:26:49 +10:00
Michael du Breuil
e1b69a7534
RC_Channel: Allow a RC_OVERRIDE_TIMEOUT of -1 to use the overrides
...
forever
2018-07-31 14:26:29 +10:00
Jonathan Challinger
83ed210869
AP_IOMCU: fix radio failsafe handling
2018-07-31 14:26:11 +10:00
Andrew Tridgell
26a8c75a84
AP_Compass: clear DEV_ID for undetected compasses
...
this prevents user confusion with the number of compasses detected
2018-07-31 14:25:40 +10:00
Timothy Knab
0dad18f014
HAL_ChibiOS: Updated OMNIBUSF7V2
...
Compasses on the I2C bus are now detected properly and GPS on UART3 works.
2018-07-31 14:24:39 +10:00
Andrew Tridgell
6d3ff416cf
AP_IOMCU: fixed setting of rate masks
...
this affects layouts which set a subset of channels on a timer
2018-07-31 14:24:30 +10:00
Andrew Tridgell
fa4d125727
HAL_ChibiOS: only set freq on valid IO channels
2018-07-31 14:24:27 +10:00
Andrew Tridgell
a8302911b5
HAL_ChibiOS: added Pixhawk1 build target
...
this is more obvious to users than fmuv3
2018-07-31 14:24:17 +10:00
Andrew Tridgell
24338199ac
AP_RangeFinder: fixed VL53L0X semaphore usage
2018-07-31 14:24:14 +10:00
Alexander Malishev
95d3dae64a
HAL_ChibiOS: fix DTCM size in stm32f745 mcu
2018-07-31 14:24:11 +10:00
Andrew Tridgell
ab71cec7ef
AP_Arming: only check trim on valid channel count
2018-07-31 14:24:08 +10:00
Andrew Tridgell
34fd3a9bcf
HAL_ChibiOS: changed uart order for KakuteF4
...
thanks to feedback from Arther
2018-07-12 11:50:30 +10:00
Andrew Tridgell
5bf48fad43
HAL_ChibiOS: added specific builds for the Pixracer and mRoX21 boards
2018-07-12 11:44:32 +10:00
Andrew Tridgell
465c6c5a68
AP_BoardConfig: allow hwdef.dat override of BRD_TYPE
2018-07-12 11:44:30 +10:00
Andrew Tridgell
8a23a21383
HAL_ChibiOS: fixed mRoX21 IMU setup
2018-07-12 11:44:27 +10:00
fnoop
35a5166038
HAL_ChibiOS: MatekF405-Wing UART reorder
2018-07-12 11:43:23 +10:00
Andrew Tridgell
cd6d585591
HAL_VRBrain: don't clear buffers on no baud change
2018-07-12 11:43:23 +10:00
Andrew Tridgell
e661b1266f
HAL_Linux: don't clear buffers on no baud change
2018-07-12 11:43:23 +10:00
Andrew Tridgell
84a6c18c43
HAL_PX4: don't clear buffers if no baudrate change
2018-07-12 11:43:23 +10:00
Andrew Tridgell
84624fbbf6
HAL_ChibiOS: don't clear buffers if no baudrate change
2018-07-12 11:43:23 +10:00
Andrew Tridgell
4f78d7200f
AP_FlashStorage: fixed build of example on small memory boards
2018-07-11 15:32:35 +09:00
fnoop
abdf56d6dd
HAL_ChibiOS: Fix MatekF405-Wing default compass rotation
2018-07-11 14:20:53 +09:00
Andrew Tridgell
d9ba148083
AP_Compass: fixed compass orientations on PH4
2018-07-11 14:20:34 +09:00
Andrew Tridgell
260ac21e13
AP_HAL: make linux internal i2c be 0xffff
...
based on feedback from Lucas
2018-07-11 14:20:26 +09:00
Andrew Tridgell
59a3deba3e
HAL_Linux: allow for 16 I2C buses on Linux
2018-07-11 14:20:21 +09:00
Andrew Tridgell
16bd8ae852
AP_Compass: use I2C bus masks
...
this allows for external compasses on all external I2C ports, while
retaining existing device ordering
2018-07-11 14:20:18 +09:00
Andrew Tridgell
d324c967de
AP_Notify: use I2C bus masks
2018-07-11 14:20:15 +09:00
Andrew Tridgell
ac3886e27e
HAL_PX4: implement I2C bus masks
2018-07-11 14:20:13 +09:00
Andrew Tridgell
15ff760601
HAL_Linux: implement I2C bus masks
2018-07-11 14:20:11 +09:00
Andrew Tridgell
98f241c7e4
HAL_ChibiOS: implement I2C bus masks
2018-07-11 14:20:08 +09:00
Andrew Tridgell
44685bbb7b
AP_HAL: added I2C bus mask functions and macros
2018-07-11 14:20:05 +09:00
Andrew Tridgell
05c0885d04
AP_SerialManager: fixed find_baudrate to return mapped baudrate
2018-07-11 14:14:14 +09:00
Peter Barker
969827d8f5
AP_SerialManager: remove set_console_baud, factor out find_protocol_instance
2018-07-11 14:14:04 +09:00
Andrew Tridgell
f02e944857
HAL_PX4: fixed link on aerofc-v1
...
it does not have bl_update
2018-07-11 14:11:21 +09:00
liang.tang
1a12b958fc
AC_WPNav: check validity of kP
2018-07-11 14:07:43 +09:00
Randy Mackay
734e61e80d
AP_HAL_ChibiOS: reduce default BRD_PWM_COUNT to 4 for fmv3
...
also default relay pins to use aux out 5 and 6
2018-07-11 14:02:55 +09:00
Andrew Tridgell
5b056ff8d5
HAL_ChibiOS: fixed omnibusf4pro I2C
...
many thanks to Kelly-Foster and @sh83
2018-07-11 14:02:43 +09:00
Andrew Tridgell
61b8cbc3c6
HAL_ChibiOS: added separate builds for Pixhawk4 and CUAVv5
...
this makes it easier to distinguish boards in logs, plus makes life
easier when the user is selecting the right firmware.
It also gives us the flexibility to make parameter changes as needed
2018-07-11 14:02:15 +09:00
Andrew Tridgell
a75447c8bd
HAL_ChibiOS: changed which I2C bus is internal on fmuv5
...
match PH4 arrangement
2018-07-11 14:00:28 +09:00
Andrew Tridgell
ac49b3aad4
HAL_ChibiOS: support for PH4-mini board
2018-07-11 14:00:18 +09:00
Andrew Tridgell
29dc4b6e8b
HAL_ChibiOS: ensure system_id is nul terminated
2018-07-11 14:00:00 +09:00
Andrew Tridgell
4e4a83a2fb
HAL_ChibiOS: make serial number match HAL_PX4
2018-07-11 13:57:59 +09:00
Andrew Tridgell
c5e659c9dd
HAL_ChibiOS: fixed default revo compass orientation
2018-07-11 13:57:53 +09:00
Andrew Tridgell
7bcb01d28f
GCS_MAVLink: expose HUD throttle accessor
2018-07-05 11:39:46 +10:00
Andrew Tridgell
2738ae63a3
HAL_ChibiOS: rename to CubeYellow
2018-07-05 10:40:57 +10:00
Andrew Tridgell
7296767408
HAL_ChibiOS: make CubeOrange IDs consistent with CubeBlack
2018-07-05 10:40:55 +10:00
Andrew Tridgell
2418a05459
HAL_ChibiOS: rename cube-orange to CubeOrange
2018-07-05 10:40:53 +10:00
proficnc
0a03597872
HAL_ChibiOS: Added CubeBlack hwdef
2018-07-05 10:40:51 +10:00
Andrew Tridgell
88987608ae
AP_OSD: display --- when no airspeed available
2018-07-05 10:39:48 +10:00
Andrew Tridgell
f44fe31c23
AP_OSD: added check for get_telem_data()
2018-07-05 10:39:46 +10:00
Andrew Tridgell
5a0354dfee
AP_OSD: make packed decimal the default
...
and fix SITL char spacing
2018-07-05 10:39:44 +10:00
Alexander Malishev
7320b15be4
AP_OSD: fixed packed dot
2018-07-05 10:39:41 +10:00
Andrew Tridgell
eb238a3c80
AP_OSD: added blink for SITL backend
2018-07-05 10:39:39 +10:00
Andrew Tridgell
ccdd5d2bbf
AP_OSD: use a thread for SITL OSD
...
this allows for window scaling and should fix ubuntu 18 warning
2018-07-05 10:39:37 +10:00
Andrew Tridgell
76bf630efd
AP_OSD: fixed sign of altitude
2018-07-05 10:39:35 +10:00
Andrew Tridgell
141b9703a9
AP_OSD: added option to pack decimal numbers
2018-07-05 10:39:32 +10:00
Andrew Tridgell
d8b643a888
AP_OSD: fixed sign on GPS coords
2018-07-05 10:39:29 +10:00
Kelly-Foster
2f77c4cddb
AP_OSD: widgets for BLHeli32 ESC amps, temp, rpm, and GPS lat/long
2018-07-05 10:39:27 +10:00
Andrew Tridgell
f008015b24
AP_OSD: fixed vector orientation
2018-07-05 10:39:25 +10:00
Alexander Malishev
4485efe989
AP_OSD: fixed up/down arrows
2018-07-05 10:39:23 +10:00
Alexander Malishev
b370131505
AP_OSD: fixed vertical speed item
2018-07-05 10:39:20 +10:00
Alexander Malishev
57e26c0e6b
AP_OSD: fixed speed vector calculation
2018-07-05 10:39:18 +10:00
Alexander Malishev
9dcd9298a7
AP_OSD: fixed review issues
2018-07-05 10:39:16 +10:00
Alexander Malishev
734e5647f5
AP_OSD: reduce width of the vspeed item
2018-07-05 10:39:13 +10:00
Alexander Malishev
80d85ceebc
AP_OSD: fixed type in the script
2018-07-05 10:39:10 +10:00
Alexander Malishev
5e66b57e0c
AP_OSD: added airspeed and climbrate
2018-07-05 10:39:08 +10:00
Alexander Malishev
1514a96bcb
AP_OSD: add wind speed/direction item
2018-07-05 10:39:06 +10:00
Alexander Malishev
90d6922de5
AP_OSD: show direction of the groundspeed vector
2018-07-05 10:39:04 +10:00
Alexander Malishev
9f559d2f82
AP_OSD: add compass item
2018-07-05 10:39:02 +10:00
vierfuffzig
f6bfb76691
AP_OSD: implement throttle and heading
2018-07-05 10:39:00 +10:00
Alexander Malishev
70829e67ce
AP_OSD: fixed horizon roll/pitch signs
2018-07-05 10:38:57 +10:00
Alexander Malishev
b9d36f1a77
AP_OSD: fix home direction
2018-07-05 10:38:55 +10:00
Alexander Malishev
08ff48bd74
AP_OSD: give credits to the original authors
2018-07-05 10:38:52 +10:00
Andrew Tridgell
7f17c2f41b
AP_BattMonitor: fixed ESC telem scaling
2018-07-05 10:37:51 +10:00
Peter Barker
fc378eeae1
DataFlash: move log-transfer state variables into enumerated variable
2018-07-02 10:46:52 +10:00
Peter Barker
4c2925d693
AP_Compass: remove pointless initialisations
...
If you are allocating one of these on the stack you're doing something
wrong.
2018-07-02 10:44:34 +10:00
Andrew Tridgell
0af83f9364
AP_OSD: use correct SFML header file
2018-07-02 10:43:48 +10:00
Andrew Tridgell
d3bc281a10
HAL_ChibiOS: use generic ROMFS embedding system
2018-07-02 10:43:48 +10:00
Andrew Tridgell
8ba137bd9a
waf: moved ROMFS embed script into waf folder
2018-07-02 10:43:48 +10:00
Peter Barker
20d22f3629
AP_Math: quaternion requires isnan, so include math.h to get it
2018-07-02 09:31:11 +10:00
Peter Barker
493f958eb2
DataFlash: remove unused ReadBlock method
2018-07-02 09:00:51 +10:00
Andrew Tridgell
35192a6162
AP_OSD: added SITL OSD backend
2018-07-01 21:21:28 +10:00
Alexander Malishev
0169a9287d
AP_OSD: fixed issues with horizont and home
...
Fixed roll direction.
Fixed home direction at small distances
2018-07-01 20:26:53 +10:00
Alexander Malishev
daf13cb9f4
AP_OSD: add home item
2018-07-01 20:26:53 +10:00
Alexander Malishev
d2e2a5b2ea
AP_OSD: fixes in screen swithing methods
...
Do not switch to the next screen just after initialization.
Reduced auto switch interval to 1s.
Allow switch sreen in autoswitch mode just after transition.
2018-07-01 20:26:53 +10:00
Alexander Malishev
c0db1a3625
AP_OSD: fix warnings
2018-07-01 20:26:53 +10:00
Alexander Malishev
9b687e0e50
AP_OSD: use autoscroll in text messages, add artificial horizon
2018-07-01 20:26:53 +10:00
Alexander Malishev
1949166dde
AP_OSD: add two new methods to switch osd screen
2018-07-01 20:26:53 +10:00
Alexander Malishev
d0571f55ed
AP_OSD: use autoincrement mode to reduce spi traffic
2018-07-01 20:26:53 +10:00
Peter Barker
be19ae41d4
AP_HAL_SITL: increase debug for SIM connections
2018-06-30 10:11:10 +10:00
Peter Barker
c5d13847b2
AP_HAL_SITL: set cloexec on sitl-gps file descriptors
2018-06-29 21:53:14 +10:00
Peter Barker
6d6366df48
SITL: Sim_Vicon: set CLOEXEC on vicon file decsriptor
2018-06-29 21:53:14 +10:00
Andrew Tridgell
e5435e02ad
HAL_ChibiOS: report system ID in mavlink and logs
2018-06-29 20:27:36 +10:00
Andrew Tridgell
eb2c9dfe74
AP_HAL: define CHIBIOS_SHORT_BOARD_NAME if not defined
2018-06-29 20:27:36 +10:00
Peter Barker
e577a5564f
AP_HAL_SITL: correct segfault when uartg configured
2018-06-29 18:47:30 +10:00
Peter Barker
ed724bc2be
AP_HAL_SITL: strip -w parameter on SITL reboot
2018-06-29 10:54:27 +10:00
Andrew Tridgell
b4d527a9f8
HAL_PX4: support flashing bootloader with MAVLink command
2018-06-29 09:00:40 +10:00
Michael du Breuil
4299eb9ba8
AP_Terrain: Reduce memory consumption, simplify enable checking
2018-06-29 09:00:01 +10:00
Andrew Tridgell
ca3beb88b7
HAL_ChibiOS: allow for telem1 and telem2 for bootloader on fmuv3
2018-06-29 08:17:38 +10:00
Andrew Tridgell
6cf205bdbe
HAL_ChibiOS: make sure we populate up to uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
dd059b89f3
HAL_ChibiOS: added uartG for fmuv4 and fmuv5
2018-06-29 08:17:38 +10:00
Andrew Tridgell
759121f0d0
AP_SerialManager: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
9e7d93ff48
HAL_VRBrain: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
5862138a4b
HAL_SITL: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
3fe04e941f
HAL_PX4: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
9ae6734469
HAL_Linux: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
e120f8be24
HAL_F4Light: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
4ff57bd512
HAL_Empty: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
0a5d287326
HAL_ChibiOS: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
d1fcf2bab6
AP_HAL: added uartG
...
one more uart ...
2018-06-29 08:17:38 +10:00
Lucas De Marchi
1a45aa12f5
AP_Param: warn on last pass only about unknown parameters
...
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
Lucas De Marchi
7f0d5ddf21
AP_Param: stop panic()'ing on unknown parameters
...
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.
On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.
This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Ebin
97a260a980
APM_Control: get_throttle_out_from_pitch() accepts dt as argument
2018-06-28 21:55:20 +09:00
Ebin
10914d88b7
SITL: all unchanged variables declared const in BalanceBot::update()
2018-06-28 21:55:20 +09:00
Ebin
657ff06380
APM_Control: added balancing function for BalanceBot
2018-06-28 21:55:20 +09:00
Ebin
a40de48809
AP_HAL_SITL: added BalanceBot to SITL_cmdline
2018-06-28 21:55:20 +09:00
Ebin
3a171c56b5
SITL: Added BalanceBot
2018-06-28 21:55:20 +09:00
Peter Barker
5d1d435451
AP_Arming: add type-correctness for is-armed check
...
Also, correct the constant we're testing against
2018-06-28 12:48:31 +10:00
Peter Barker
72d7181e0d
AP_Arming: remove pointless initialisations
...
These are part of a static object
2018-06-28 12:48:31 +10:00
Peter Barker
e3dc408295
AP_Arming: move copter-specific code into Copter subclass
2018-06-28 12:48:31 +10:00
Andrew Tridgell
963675689c
HAL_ChibiOS: fixed substitution of %BOARD%-BL
2018-06-28 11:35:13 +10:00
Andrew Tridgell
54dc67e2a9
HAL_ChibiOS: default bootloader product string to XX-BL
2018-06-28 11:35:13 +10:00
Andrew Tridgell
946d0208e5
HAL_ChibiOS: fixed stm32f7 cache bug in erase flash page
2018-06-28 11:35:13 +10:00
Andrew Tridgell
d183efa720
HAL_ChibiOS: fixed USB string of fmuv5 bootloader
2018-06-28 11:35:13 +10:00
Andrew Tridgell
2b7b499c63
HAL_ChibiOS: added support for RTC sig for fast boot
2018-06-28 11:35:13 +10:00
Andrew Tridgell
a3e44b3249
GCS_MAVLink: fix from review comment
...
thanks Pierre
2018-06-28 11:35:13 +10:00
Andrew Tridgell
f7f9d2b0e7
HAL_ChibiOS: added fmuv4 bootloader hwdef-bl.dat
2018-06-28 11:35:13 +10:00
Andrew Tridgell
3a5b3b4b1b
HAL_ChibiOS: fixed adding bootloader to ROMFS
2018-06-28 11:35:13 +10:00
Peter Barker
e332bece0f
AP_HAL_ChibiOS: embed any bootloader found for a board
2018-06-28 11:35:13 +10:00
Peter Barker
4a8614fbbd
GCS_MAVLink: handle MAV_CMD_FLASH_BOOTLOADER
2018-06-28 11:35:13 +10:00
Peter Barker
a81b3c8a7c
AP_HAL_ChibiOS: specify bootloader for sparky2
2018-06-28 11:35:13 +10:00
Peter Barker
f07b6f3d78
AP_HAL_ChibiOS: add support for flashing bootloader
2018-06-28 11:35:13 +10:00
Peter Barker
b9b0ef0c77
AP_HAL: add flash_bootloader to AP_HAL API
2018-06-28 11:35:13 +10:00
ChristopherOlson
1709c258bf
AP_Motors:TradHeli - fix metadata for H_COL_CTRL_DIR
2018-06-28 09:02:48 +09:00
Pierre Kancir
0ee6e41f6e
AP_IRLock: Replace find_object with SITL singleton
2018-06-27 14:59:33 -07:00
Patrick José Pereira
b66b4775bc
SITL: Replace find_object with SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-27 14:59:33 -07:00
Patrick José Pereira
32fa7e2c2a
AP_RangeFilter: Fix equality comparison with extraneous parentheses
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-27 14:59:33 -07:00
Michael du Breuil
2577e5ff25
AP_HAL: Don't always define GPIO pins, they may be connected to real
...
hardware
2018-06-27 15:25:44 +10:00
Michael du Breuil
72439a053b
AP_Notify: Handle LED pins being undefined, select appropriate drivers
2018-06-27 15:25:44 +10:00
Michael du Breuil
c5669a614e
AP_Notify: Remove unneeded init guards
2018-06-27 15:25:44 +10:00
Michael du Breuil
565a84efcb
AP_Notify: Remove unreachable ChibiOS defines, enable BoardLed
2018-06-27 15:25:44 +10:00
Michael du Breuil
abda44e886
AP_Notify: Move driver deletion to backend creation macro
...
Creates a dense array of drivers we want to update, reduces runtime
overhead, allows us to try detecting more backends then are present
2018-06-27 15:25:44 +10:00
Michael du Breuil
8e8e9a5a58
AP_Notify: Delete drivers that are not present
2018-06-27 15:25:44 +10:00
Michael du Breuil
d0cd37fabb
AP_Notify: Reduce flash consumption, remove unneeded middleware classes
2018-06-27 15:25:44 +10:00
Andrew Tridgell
10533fb249
HAL_ChibiOS: enable OSD font on OMNIBUSF7V2
2018-06-27 14:55:00 +10:00
Andrew Tridgell
ea3467348e
AP_OSD: fixed typo
2018-06-27 14:55:00 +10:00
Andrew Tridgell
a86c4d27e1
AP_OSD: fixed CI build error
2018-06-27 14:55:00 +10:00
vierfuffzig
aeaf695d83
AP_OSD: add ground speed item
2018-06-27 14:55:00 +10:00
Alexander Malishev
fcd351b5c0
AP_OSD: fixed gps stat and messages items, reformat
2018-06-27 14:55:00 +10:00
Alexander Malishev
af96673004
AP_OSD: added screen switch by rc channel
2018-06-27 14:55:00 +10:00
Alexander Malishev
e487f37fd7
HAL_ChibiOS: added font check on startup
...
Based on Andrew Tridgell suggestion
2018-06-27 14:55:00 +10:00
Alexander Malishev
79b289f97e
HAL_ChibiOS: reverted change in omnibus hwdef.dat
2018-06-27 14:55:00 +10:00
Andrew Tridgell
43d0a61da0
AP_OSD: fixed build
2018-06-27 14:55:00 +10:00
Andrew Tridgell
76fd0962e7
AP_OSD: fixes from review comments
2018-06-27 14:55:00 +10:00
Andrew Tridgell
06fdc50169
AP_OSD: switched to 2-d arrays
...
makes it a bit easier to read
2018-06-27 14:55:00 +10:00
Andrew Tridgell
2fb63828bb
AP_OSD: use fixed array sizes
...
the allocation didn't win anything as the backend is already allocated
2018-06-27 14:55:00 +10:00
Andrew Tridgell
2c29d1c297
AP_OSD: tidy ups
2018-06-27 14:55:00 +10:00
Andrew Tridgell
5dc3515c83
AP_OSD: fixed X range
2018-06-27 14:55:00 +10:00
Andrew Tridgell
8f8107d13f
AP_OSD: moved to new parameter system
2018-06-27 14:55:00 +10:00
Andrew Tridgell
8e8508a9f3
HAL_ChibiOS: enable OSD for MatekF405
2018-06-27 14:55:00 +10:00
Andrew Tridgell
cf19e7a3ae
HAL_ChibiOS: enabled OSD on KakuteF4
2018-06-27 14:55:00 +10:00
Alexander Malishev
c1d82a43c5
AP_OSD: initial version
2018-06-27 14:55:00 +10:00
Alexander Malishev
568e5a24b4
AP_Notify: initial OSD support
2018-06-27 14:55:00 +10:00
Alexander Malishev
8ce7ef1342
HAL_ChibiOS: added OSD support for MatekF405 and Omnibuspro
2018-06-27 14:55:00 +10:00
Andrew Tridgell
35f835a021
HAL_ChibiOS: improved OMNIBUSF7V2 support
2018-06-27 13:01:30 +10:00
Andrew Tridgell
7cce23671a
HAL_CbibiOS: removed unnecessary BOARD_SUBTYPE define
...
just causes build warnings
2018-06-27 11:37:45 +10:00
Andrew Tridgell
5bf078cc86
HAL_ChibiOS: fixed build with -Werror-sign-compare
2018-06-27 11:37:45 +10:00
Alexander Malishev
14db344c12
AP_RCProtocol: improve s-bus parsing
...
This relax s-bus timing requirement to allow not so perfect signals.
Fixes s-bus on s-bus pin in matekf405-wing
Also fixed comment a bit
2018-06-27 09:10:11 +10:00
Lucas De Marchi
49d08ba72a
Global: remove minlure
...
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.
It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
2018-06-26 07:32:08 -07:00
Lucas De Marchi
d31e85e738
AP_HAL_Linux: fix copy and paste error on gpio table
2018-06-26 07:32:08 -07:00
Peter Barker
9eb53e333b
AP_Compass: tidy consistency calculations
...
AP_Compass: normalize vectors in-place to save a few bytes (thanks MdB)
2018-06-26 18:37:55 +10:00
Michael du Breuil
a92c4aa9fd
AP_HAL: Update comment on UARTDriver::begin to reflect automatic
...
clearing
2018-06-26 02:18:18 +01:00
Michael du Breuil
3af6b78d67
AP_HAL_VRBrain: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
8680f1ab52
AP_HAL_SITL: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
512939a839
AP_HAL_PX4: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
7043738f3b
AP_HAL_Linux: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
153ee6ca8e
AP_HAL_ChibiOS: Clear UART buffers when opening a port
2018-06-26 02:18:18 +01:00
Michael du Breuil
037e53ba8a
AP_HAL_ChibiOS: Reduce flash space of UARTDriver
...
Saves 32 bytes
2018-06-26 02:18:18 +01:00
Peter Barker
e7e0ee0b50
AP_Proximity: add methods covering sensor health, enable and present
2018-06-26 10:25:28 +10:00
Pierre Kancir
bffe3f6c21
AC_WPNav: add getter for crosstrack_error
2018-06-26 08:42:14 +09:00
Michael du Breuil
d977ca091a
AP_Arming: Correct an edge case that would not run compass checks
2018-06-26 09:26:29 +10:00
Patrick José Pereira
cd5c59773b
AP_HAL_SITL: Use SITL, baro, INS and compass singletons
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
a4d8ed4b75
AP_HAL_SITL: Use reinterpret_cast with AP_Param::find_object
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
ae378f0fb3
SITL: Use reinterpret_cast with AP_Param::find_object
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
f68b07df1f
SITL: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
00cb588257
AP_RPM: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
50613c3800
AP_Proximity: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
653784479e
AP_OpticalFlow: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
0c06bf89e5
AP_InertialSensor: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
e456655932
AP_Compass: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
37fbd6aaa1
AP_Beacon: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
4ae6bd2c7e
AP_Baro: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Patrick José Pereira
819f08b7f7
AP_AHRS: Use SITL singleton
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-06-26 00:02:01 +01:00
Andrew Tridgell
a0b4553a26
HAL_ChibiOS: fixed bootloader build issue
2018-06-25 21:22:31 +10:00