Commit Graph

36290 Commits

Author SHA1 Message Date
Andrew Tridgell b8eab36298 AP_ADC: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andrew Tridgell 260a8eaddc AC_PrecLand: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andrew Tridgell 4c41805a3d AC_PID: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andrew Tridgell c95624a040 AC_Fence: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andrew Tridgell 18e5da78d2 AC_CustomControl: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andrew Tridgell c36c37099d AC_Avoidance: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Andrew Tridgell aa2f885e2f AP_Common: added checks for new without std::nothrow
and add NEW_NOTHROW macro
2024-06-04 09:20:21 +10:00
Andrew Tridgell 4f6653e5c7 HAL_SITL: avoid std::vector in command line handling
use ObjectArray instead
2024-06-04 09:20:21 +10:00
Andrew Tridgell c764e60aa0 HAL_SITL: avoid use of std::queue
use ObjectArray instead
2024-06-04 09:20:21 +10:00
muramura eec7876028 SITL: correct valgrind failure in SIM_GPS_SBP2 2024-06-03 21:30:32 +10:00
Peter Barker db6245bb66 AP_CRSF_Telem: add missing VideoTX include
We use the vtx singleton in here, so we need the header.

... also fix up the includes and ifdefs a little.
2024-06-03 17:51:47 +10:00
Bron2002 165b0e929f AP_GPS: add checking of instance number before update with incoming data 2024-06-03 12:18:11 +10:00
Andy Piper 07f0bfc8c9 AP_IOMCU: correct TCIE setting and add more debug 2024-06-02 10:54:14 +10:00
Andy Piper ae8a2d9513 AP_HAL_ChibiOS: reset pwm peripheral on F1 when deallocating IC DMA 2024-06-02 10:54:14 +10:00
Andrew Tridgell c2a9bc93b5 SITL: added --uartA alias for SITL
needed for MissionPlanner SITL

see https://github.com/ArduPilot/MissionPlanner/pull/3359

we will need this till a new stable release of MissionPlanner is done
2024-06-01 21:35:55 +10:00
Andrew Tridgell 4e0e20aee1 SITL: added plane-steering model for ground steering
needs to be updated with improved yaw rate calculation
2024-06-01 20:09:25 +10:00
Iampete1 51c77fe098 Filter: Testes: notch: interpolate crossing points for acurate phase lag 2024-06-01 16:37:07 +10:00
Andrew Tridgell c908636cde Filter: added test of phase lag vs attenuation 2024-06-01 16:37:07 +10:00
Henry Wurzburg f5a6193cbf AP_HAL_ChibiOS:correct pin to be pulled high during boot 2024-06-01 10:23:52 +10:00
Peter Barker b2b8eb93a6 SITL: correct valgrind failure in SIM_GPS_SBP 2024-05-31 13:23:03 +10:00
Ryan Friedman 513938b0ff AP_DDS: Use common quaternion initialization function
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-30 16:57:28 +10:00
Leonard Hall 0accc61107 AC_AutoTune: Move functions out of HAL_LOGGING_ENABLED 2024-05-29 18:29:23 +10:00
Leonard Hall 20edb9185d Copter: Autotune: Remove double call to AC_Attitude_Control 2024-05-29 18:29:23 +10:00
Leonard Hall b9e06402af Copter: Autotune: Increase waiting for level timeout. 2024-05-29 18:29:23 +10:00
Leonard Hall cebcbf0044 Copter: Autotune: Virtual methods to separate Heli and Multi 2024-05-29 18:29:23 +10:00
Leonard Hall 45525a40b8 Copter: Autotune: Don't Fail min D for Yaw Filter 2024-05-29 18:29:23 +10:00
Leonard Hall a7962c35b6 Copter: Autotune: Reduce MIN_D 2024-05-29 18:29:23 +10:00
Leonard Hall 858d90cb95 Copter: Autotune: Improve angle limit test 2024-05-29 18:29:23 +10:00
Leonard Hall 712cf3696b Copter: Autotune: Small changes for clarity 2024-05-29 18:29:23 +10:00
Leonard Hall 79f4e0a2d8 Copter: Autotune: Level requirement improvements 2024-05-29 18:29:23 +10:00
Leonard Hall 41a5a1b8fe Copter: Autotune: Notify user of min Rate D for action 2024-05-29 18:29:23 +10:00
Leonard Hall fcd3c8502f Copter: Autotune: Twitch direction enhancements 2024-05-29 18:29:23 +10:00
Leonard Hall e2560371cf Copter: Autotune: Base angles limits on lean_angle_max 2024-05-29 18:29:23 +10:00
Leonard Hall 54618dd903 Copter: Autotune: Fail when bad tune is expected 2024-05-29 18:29:23 +10:00
Leonard Hall 13fb69be7c Copter: Autotune: Look for bounce earlier in test 2024-05-29 18:29:23 +10:00
Leonard Hall 18d18d14fc Copter: Autotune: Set D = 0 for Yaw test 2024-05-29 18:29:23 +10:00
Leonard Hall c000efdabe Copter: Autotune: Increase test timeout 2024-05-29 18:29:23 +10:00
Leonard Hall 327fd034da Copter: Autotune: Reduce default AGGR 2024-05-29 18:29:23 +10:00
Leonard Hall c47b3b8f03 Copter: Autotune: Reduce chance of desync 2024-05-29 18:29:23 +10:00
Tom Pittenger 9669699405 AP_Networking: enable Socket IP reuse 2024-05-29 18:29:03 +10:00
Andy Piper 304751e162 AP_RCTelemetry: only update VTX parameters if CRSF provider was enabled 2024-05-29 17:49:08 +10:00
Andy Piper 607249d73d AP_VideoTX: add autobauding to Tramp
Record enabled backends
2024-05-29 17:49:08 +10:00
Rhys Mainwaring 88926a38cf AP_DDS: make all subscriber QoS best effort reliability
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-05-29 17:47:52 +10:00
Rhys Mainwaring 840f4b142d AP_DDS: fix type string for navsat msg
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-05-29 17:47:52 +10:00
Rhys Mainwaring c71ef23657 AP_DDS: create entities by binary
- Add topic name and type to topic table.
- Use binary creation functions for participants and topics.
- Add constant for domain ID.
- Create publishers and datawriters by binary
- Create subscribers, datareaders and services by binary
- Add extra fields to the services table.
- Remove dds_xrce_profile.xml
- Document additional service table fields
- Add QoS struct to topic and service tables
- Replace profile labels with enums.

Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-05-29 17:47:52 +10:00
xingchengGE 3ba16eb933 AP_Motor: Fix a typo 2024-05-29 16:28:02 +09:00
radityankn 4cab322356 Update RCOutput.cpp
erasing additional curly brackets
2024-05-29 17:02:48 +10:00
radityankn 119f822583 AP_HAL_ESP32: support for Safety Switch
modified RCOutout.cpp to read specified pin for safety switch and light
the LED on another specified pin
2024-05-29 17:02:48 +10:00
David Buzz 1c9a44c33e AP_HAL_ESP32:LOWERING the MAIN_PRIO gets a 400hz loop rate on s3 "empty" board
loop_rate: actual: 400.000000Hz, expected: 400Hz
loop_rate: actual: 400.000000Hz, expected: 400Hz
loop_rate: actual: 400.000000Hz, expected: 400Hz
[ setup esp32 build env ] 
./waf configure --board=esp32s3empty --debug
./waf copter --debug --disable-scripting --upload
 after upload:
cd build/esp32s3empty/esp-idf_build && ninja monitor && cd -
[watch console output for 2 minutes]
ctrl-right-square-bracket to stop watching console.
2024-05-29 13:12:37 +10:00
David Buzz 07092715a7 AP_HAL_ESP32: print loop rate
loop rate getting 262Hz from console after approx 2 minutes boot

loop_rate: actual: 262.022766Hz, expected: 400Hz
loop_rate: actual: 262.022766Hz, expected: 400Hz

t
2024-05-29 13:12:37 +10:00
David 'Buzz' Bussenschutt 529d783e0e AP_HAL_ESP32: automatic S3 sdkconfig changes generated by IDF 2024-05-29 13:12:37 +10:00
Pierre Kancir 9623e7a249 AP_HAL_SITL: Give tcp client 3 attempts to connect
This make tcp client connection easier when connecting multiple sitl instances
2024-05-29 13:12:09 +10:00
Andrew Tridgell d305cb47f8 AP_Scripting: added GPS yaw binding
useful for seeing if switching to a GPS yaw source set in EK3 will work
2024-05-29 12:56:57 +10:00
Andrew Tridgell bf9f3b8660 AP_Scripting: added notch_switch example
switch between two notch setups using attenuation change
2024-05-29 12:56:43 +10:00
Henry Wurzburg f5f78b7711 AP_HAL_ChibiOS:Improve SDMODELH7V2 definition 2024-05-29 10:40:03 +10:00
petrosilius 1d810bfa6f AP_Scripting: added tracker Pelco-D control script
This script uses the scaled output from the antennatracker servos and map them to corresponding Pelco-D messages to be sent via a RS-485 interface to a motorized base (can be anything from motorized tracker to a PTZ camera).
If your FCU doesnt offer a RS-485 interface by default, you can use or TTL-RS485- or USB-RS485-adapters.

Pelco-D allows to control using either speed-/differential- or absolute-control control of the pan-/tilt-axis.
Currently the script uses speed based control using by mapping the "ContinuousRotation" type servos outputs to the corresponding Pelco-D messages.
The absolute control messages are implemented nevertheless for future use.

The script assumes therefor at least the following parameters to be set:

SCR_ENABLE = 1
SERVO_PITCH_TYPE = 2  # ContinuousRotation type servo
SERVO_YAW_TYPE = 2    # ContinuousRotation type servo
SERIALx_PROTOCOL = 28 # serial port used by luascript

Additionally the PITCH2SRV and YAW2SRV tuning needs to be done as described by the antennatracker description.
Also keep attention to the PITCH_MIN, PITCH_MAX and YAW_RANGE parameters to fit your Pelco-D hardware!
2024-05-28 17:42:52 +10:00
Andrew Tridgell e0af22ad8f SITL: update to work on newer cygwin versions 2024-05-28 11:33:38 +10:00
Iampete1 3f6ce2dc09 AP_DroneCAN: Serial: map baudrates so param works as expected 2024-05-28 10:27:20 +10:00
Peter Barker 720c8719dc waf: boards.py: use chibios_hwdef.py to get boards list 2024-05-28 10:25:39 +10:00
Peter Barker a669249416 GCS_MAVLink: default support for BATTERY2 sending to off
replaced by BATTERY_STATUS
2024-05-28 10:11:37 +10:00
Iampete1 f5e7bfcc48 AP_Scripting: remove support for REPL 2024-05-28 10:10:14 +10:00
rotorman 0962b759b0 AP_HAL_ChibiOS: adds Flywoo/Goku F405 HD 1-2S ELRS AIO v2 flight controller support
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2024-05-28 09:57:14 +10:00
MattKear 0a6fa4f886 AP_SurfaceDistance: Start library for tracking the floor/roof distance 2024-05-28 09:55:36 +10:00
Iampete1 e10b4abad8 ChibiOS: UART: Add support for RS-485 Driver Enable RTS flow control 2024-05-28 09:48:19 +10:00
Iampete1 e6a0abdfce AP_HAL_ChibiOS: hwdef.py: find alt function for UART RTS and add to init struct 2024-05-28 09:48:19 +10:00
Iampete1 0959930289 AP_BoardConfig: update RTSCTS param values for new option 2024-05-28 09:48:19 +10:00
Iampete1 50fd01af97 GCS_MAVLink: use new `flow_control_enabled` helper 2024-05-28 09:48:19 +10:00
Iampete1 713eda617f AP_Scripting: allow new flow control type in `set_flow_control` binding 2024-05-28 09:48:19 +10:00
Iampete1 d340f37678 AP_HAL: UARTDriver: Add new flow control option "FLOW_CONTROL_RTS_DE" for RS485 driver enable. 2024-05-28 09:48:19 +10:00
Thomas Watson 0956b4f65d AP_HAL_SITL: remove deprecated --uartX options
Code remains to check for use of these options and give an error which
contains the correct option to use, due to the non-intuitive mapping
between --uartX and --serialN.

A future version will remove that code too.
2024-05-28 09:23:39 +10:00
Thomas Watson d2456f4199 SITL: remove references to legacy UART order 2024-05-28 09:23:39 +10:00
burgeruser 458cb0a1c9 AP_HAL_ChibiOS: bi-directional dshot on iomcu F103 8MHz 2024-05-28 06:56:14 +10:00
Rhys Mainwaring 33d51d52ad AP_DDS: ensure zero rotation quaternions are normalised
- ROS expects quaternions to be normalised and the default message constructor does not enforce this.
- Fix normalisation for pose stamped.

Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-05-26 09:46:48 +10:00
Stephen Dade d16ff40162 RC_Channel: detect duplicate aux functions with an ID >256 2024-05-24 09:57:17 +10:00
Paul Riseborough 91423d4c71 AP_NavEKF3: Remove unncessary local position height reporting offset
The offset generated by the EK3_OGN_HGT_MASK parameter bit 2 option is applied to the baro or range finder sensor so it does not have to be applied to the local position height.
2024-05-23 10:35:51 +10:00
Paul Riseborough 5fded75eb6 AP_NavEKF3: Adjust sensor height when EK3_OGN_HGT_MASK bit 2 is set 2024-05-23 10:35:51 +10:00
David O'Connor 77adb5586d AP_HAL_ChibiOS: Added mag and dataflash logging support to AnyLeaf H7 2024-05-23 09:48:02 +10:00
Peter Barker b7cf418d1e GCS_MAVLink: allow handling of AP_MAVLINK_MSG_HIL_GPS_ENABLED to be compiled out 2024-05-23 09:16:32 +10:00
Peter Barker 05b8c28ea9 AP_GPS: allow handling of AP_MAVLINK_MSG_HIL_GPS_ENABLED to be compiled out 2024-05-23 09:16:32 +10:00
Alex Burka 8e399cffbe AP_InternalError: fix signedness issue with snprintf 2024-05-22 23:22:23 +10:00
Iampete1 0c6f396438 AP_Scripting: docs: document all functions currently documented on the wiki 2024-05-22 18:13:53 +10:00
Peter Barker 482342340d hwdef: fold minimal_GPS.inc into sole user 2024-05-22 18:03:06 +10:00
Randy Mackay 72b5efd8b3 AP_Mount: serial backends gets instance 2024-05-22 18:00:22 +10:00
Randy Mackay 99626b73ff AP_Mount: SToRM32_serial inherits from serial backend 2024-05-22 18:00:22 +10:00
Randy Mackay 7fc00efe7e AP_Mount: Viewpro inherits from serial backend 2024-05-22 18:00:22 +10:00
Randy Mackay 790b5e8565 AP_Mount: Siyi inherits from serial backend 2024-05-22 18:00:22 +10:00
Randy Mackay 1e777390b2 AP_Mount: add Backend_Serial 2024-05-22 18:00:22 +10:00
Andy Piper 3a4fdb16a8 AP_RCTelemetry: add support for baro/vario CRSF frames 2024-05-22 17:15:04 +10:00
Andy Piper 1e2621466c AP_Frsky_Telem: factor out vspeed and nav alt 2024-05-22 17:15:04 +10:00
Andy Piper 9112b14414 AP_RCProtocol: add frame ids for CRSF baro/vario 2024-05-22 17:15:04 +10:00
James O'Shannessy a5e11911fc AP_Mount: Only save converted mount if mount was previously set in the first place
The mount library force configures the mount type on conversion, even if the mount was never configured in the first place
2024-05-22 17:11:40 +10:00
Andrew Tridgell 5fd4e23fa9 AP_Compass: removed IST8310 overrun message
this is not useful and just causes concern to users. Any small bus
delay can trigger this. We have health monitoring at a higher level
2024-05-22 14:51:15 +10:00
Peter Barker 24e54dac88 AC_WPNav: remove un-needed initialisation 2024-05-21 15:52:51 +10:00
Nick Exton 0af4649705 AP_Mount: In Servo backend, report attitude as demanded servo angles, not target angles 2024-05-21 14:27:28 +09:00
Nick Exton e17439287b AP_Mount: In Servo backend, add overrides for has_roll_control() and has_tilt_control() 2024-05-21 14:27:28 +09:00
Nick Exton 0e090faf05 AP_Mount: Add roll_range_valid() and pitch_range_valid() functions
Equivalent to yaw_range_valid().
2024-05-21 14:27:28 +09:00
Bob Long 7e8f9c72fb AP_MotorsTri: reverse-frame cleanup and fixes
- fix motor test order for reverse frame
- add frame type string for reverse frame
- fix initialization of _pitch_reversed flag
2024-05-21 15:20:27 +10:00
Bob Long dc3f2c9724 AP_Motors_test: add tri frames to json output 2024-05-21 15:20:27 +10:00
Nick Exton 8b5539c055 AP_Mount: Clarify angle frames of set_angle_target() 2024-05-21 14:28:38 +10:00
Iampete1 44bd77d49e AP_BattMonitor: FuelLevel_Ananlog: set has_current true so capacity is reported 2024-05-21 10:07:48 +10:00
Andrew Tridgell 54b6349a2a HAL_SITL: implement wind rate of change 2024-05-21 09:59:37 +10:00
Andrew Tridgell 1603869140 SITL: added SIM_WIND_TC
time constant for wind changes
2024-05-21 09:59:37 +10:00
Peter Barker 36e385fb22 AP_NavEKF3: set-origin failure comment improved 2024-05-21 09:56:02 +10:00
Randy Mackay 4e2dd7c399 AP_NavEKF3: accept set origin even when using GPS 2024-05-21 09:56:02 +10:00
muramura ddae068657 AP_Param: Summarize the type definitions settings 2024-05-21 09:46:32 +10:00
Iampete1 91cdea1a8d AP_Scripting: examples: fault_handling.lua: ignore errors. 2024-05-21 09:42:22 +10:00
Iampete1 3a7bf8dd7d AP_Scripting: ignore lua language check issues resulting from https://github.com/ArduPilot/ardupilot/pull/26939 2024-05-21 09:42:22 +10:00
Iampete1 d2e95583d6 AP_Scripting: docs: update 2024-05-21 09:42:22 +10:00
Iampete1 003ccc38c6 AP_Scripting: generator allow more types for uint32 prams and dont add class keyword to globals 2024-05-21 09:42:22 +10:00
Iampete1 cc159a44d5 AP_Scripting: tests: add config files for checks and docs generation 2024-05-21 09:42:22 +10:00
Iampete1 5bb5f442e1 AP_Scripting: ignore lua-language-server-errors 2024-05-21 09:42:22 +10:00
rmaia 07c854db57 AP_OSD: add BTFL sidebar symbols
Adds the sidebar symbols translation to BTFL fonts, so sidebar is properly displayed in DJI O3 OSD.
2024-05-21 09:23:49 +10:00
rmaia e07980db43 AP_OSD: Add configurable sidebar horizontal and vertical size extensions 2024-05-21 09:21:56 +10:00
Randy Mackay 19ea0944b1 AP_SerialManager: TYPE param renamed to MAVLink 2024-05-21 08:38:59 +10:00
Randy Mackay 1da3c24850 AP_EFI: TYPE param renamed to MAVLink 2024-05-21 08:38:59 +10:00
Randy Mackay fcc2e2ac5a AC_PrecLand: TYPE param renamed to MAVLink 2024-05-21 08:38:59 +10:00
Randy Mackay 31720d2c83 AP_GPS: TYPE param value renamed to MAVLink 2024-05-21 08:38:59 +10:00
Andrew Tridgell 5cf2c2740e AP_Terrain: added parameter for terrain cache size 2024-05-17 10:18:13 +10:00
Maxim Buzdalov ada091f1fc AP_IOMCU: add support for Extended DShot Telemetry v2 2024-05-15 17:29:19 +10:00
Maxim Buzdalov 1232e810d4 AP_HAL: add support for Extended DShot Telemetry v2 2024-05-15 17:29:19 +10:00
Maxim Buzdalov 43937ddeed AP_HAL_ChibiOS: add support for Extended DShot Telemetry v2 2024-05-15 17:29:19 +10:00
Maxim Buzdalov 0022c3aa72 AP_ESC_Telem: add support for Extended DShot Telemetry v2 2024-05-15 17:29:19 +10:00
bnsgeyer 8a42a29ef7 AC_AttitudeControl: add comments for system ID disturbance input code 2024-05-14 23:16:52 -04:00
bnsgeyer c2e99dc50e AC_AttitudeControl: implement suggested changes 2024-05-14 23:16:52 -04:00
bnsgeyer 84e52378cf AC_PosControl: add support for sysid of vel and pos loops 2024-05-14 23:16:52 -04:00
Peter Barker 9f0e191505 GCS_MAVLink: deny attempt to do partial upload while mission transfer in progress
fixes an internal error where we make sure resources are not allocated before allocating upload resources.

The user may receive a DENIED message if they move a waypoint before an item has been transfered to the vehicle.
2024-05-15 12:26:34 +10:00
Andy Piper 2891b37807 AP_HAL_ChibiOS: add SDMODELV2 2024-05-15 07:27:46 +10:00
Andrew Tridgell 188df1312d AP_Scripting: fixed float register save/restore in setjmp/longjmp
the register save must happen before the setjmp() call, which means
outside of the LUAI_TRY() macro. We also should be saving all 32
floating point registers
2024-05-15 06:47:44 +10:00
Andrew Tridgell 09df079c19 AP_Scripting: added example script that causes a hard fault
this exercises rapid fault handling
2024-05-15 06:47:44 +10:00
Andy Piper 2352990d90 AC_AutoTune: zero out D_FF during twitching 2024-05-14 16:33:38 +09:00
Iampete1 0bb51a31ea AP_HAL_ChibiOS: remove setting of ROMFS flags 2024-05-14 10:05:51 +10:00
Ryan Friedman 2dc547bec2 AP_ExternalAHRS: Fix duplicate condition
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-14 09:58:59 +10:00
Iampete1 9026ce065a AP_BattMonitor: ESC: add mask 2024-05-14 09:58:04 +10:00
Andy Piper a7d4183776 AP_HAL_ChibiOS: BLITZ Wing H743 2024-05-14 09:35:51 +10:00
Clyde McQueen b853fe3366 AP_RangeFinder: fix Lua timeout 2024-05-14 09:26:25 +10:00
Peter Barker bd3e58c413 GCS_MAVLink: mark as not receiving when too many items in MISSION_COUNT.count
we left things in the "receiving" state, which would eventually lead to a timeout, rather than just failing instanenously with the correct code.
2024-05-14 09:21:53 +10:00
Patrick José Pereira 34f5579699 AP_HAL_Linux: Remove message about base address
The value is the same as in the match

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira 6016e411e0 AP_HAL_Linux: Add support to Raspberry Pi 5
The Raspberry Pi 5 has a coprocessor that takes care of the IO over the BCM.
This adds support to the new RP1 processor.

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira 3f451b9f4c AP_HAL_Linux: Util_RPI: Add message about unknown board
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira 4af6142933 AP_HAL_Linux: Util_RPI: Add support to RPI5 identification
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Ryan Friedman fbb785859a SITL: fix GPS headings
* Rename NMEA heading to ground_course_deg
* Rename heading() utility to ground course (it was wrong)
* Add _rad prefix to be pedantic about units
* Add missing degrees conversion in NMEA because NMEA is not SI

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-12 21:06:52 +10:00
Ryan Friedman 3b1ba19640 AP_GPS: fix GPS headings
* If you don't wrap the heading, you can get a flyaway

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-12 21:06:52 +10:00
mateksys 8c23379d45 AP_HAL_ChibiOS: add MatekG474-Periph hwdef 2024-05-10 12:54:11 +10:00
Andrew Tridgell 3050a8b0dc HAL_ChibiOS: fixed erasing of G4 dual-bank past 256k flash
BKER needs to be set to bank number, lower 7 bits of page number in
PNB
2024-05-10 12:54:11 +10:00
MattKear 7b02a99d14 AP_MotorsHeli: Swash: Make motor numbers const 2024-05-09 15:19:44 -04:00
Andy Piper 8c91077c35 AP_HAL_ChibiOS: correct GPS output on MambaH743v4 2024-05-08 18:56:45 +10:00
Andrew Tridgell b4bc6f1e2e hwdef: added MatekL431-APDTelem
for using APD ESCs with serial telemetry
2024-05-08 18:19:19 +10:00
Peter Barker 972872d09f AP_Baro: create explicit define for BARO_PROBE_EXT parameter
the more-than-trivial #if is needed elsewhere, so create an explicit name for it
2024-05-08 18:18:07 +10:00
Peter Barker 51dc35f6ff AP_Mission: emit jump count even if no limit
previously if there was a jump limit we informed the user we were jumping and provided the current count and the limit.

This changes things so that if there's no limit we emit the same message, with the count and "unlimited" in place of the limit number
2024-05-08 17:56:56 +10:00
Randy Mackay e605f961f2 AP_BattMonitor: torqeedo support for multiple instances 2024-05-08 17:51:09 +10:00
Randy Mackay 72718bb783 AP_Torqeedo: multi backend support 2024-05-08 17:51:09 +10:00
magate a6995c93cc AP_Scripting: allow revert of angular rate limits 2024-05-08 17:43:04 +10:00
muramura 3a1e07d816 Filter: Get common processes out of the way 2024-05-08 17:41:32 +10:00
Peter Barker 599ff17f34 AP_HAL_Linux: fix SPIUARTDriver to work with GPS autodetection
GPS auto-detection requires get_baud_rate to return non-zero.  The SPIUARTDriver was returning 0.
2024-05-08 17:13:58 +10:00
MallikarjunSE d93f9a09db hwdef:update DMA 2024-05-08 09:04:45 +10:00
Andrew Tridgell 04c3770a77 AP_Motors: use AHRS for get_air_density_ratio() 2024-05-07 21:19:06 +10:00
Andrew Tridgell 5a439bb9b7 AP_AHRS: added get_air_density_ratio() 2024-05-07 21:19:06 +10:00
Andrew Tridgell b4ebae5e1b HAL_SITL: use baro atmospheric tables 2024-05-07 21:19:06 +10:00
Andrew Tridgell 67c506e75c SITL: use new atmospheric tables
and improve pitot handling
2024-05-07 21:19:06 +10:00
Andrew Tridgell db9cc9ac84 AP_DAL: use ahrs for EAS2TAS
this uses the stored value calculated once per loop
2024-05-07 21:19:06 +10:00
Andrew Tridgell 3d2037ef03 AP_Baro: log AltAMSL
useful as GPS comparison
2024-05-07 21:19:06 +10:00
Andrew Tridgell f8ce6a8623 AP_Baro: added atmospheric tables for high altitude flight
this gets altitude and EAS2TAS much more accurately up to around 150k
feet AMSL. Enabled on boards using EKF double
2024-05-07 21:19:06 +10:00
Andrew Tridgell 128d9b0e41 AP_Airspeed: added atmospheric tables for high altitude flight
this gets altitude and EAS2TAS much more accurately up to around 150k
feet AMSL. Enabled on boards using EKF double
2024-05-07 21:19:06 +10:00
Andrew Tridgell bae5859a92 AP_Scripting: added copter_loiter_brake script
for automatic BRAKE mode when flying in LOITER in steep terrain
2024-05-07 19:39:39 +10:00
Nick Exton c9f4c47b42 AP_JSON: Ensure all printf() calls end with line break 2024-05-07 14:39:19 +10:00
Henry Wurzburg 061823551a hwdef:preconfig MicoAir bds shipping with BF for BF migration 2024-05-07 14:14:06 +10:00
Henry Wurzburg 7a21f2b862 hwdef: enable can port on Blitz743Pro 2024-05-07 10:44:15 +10:00
Iampete1 a8b4999d96 AP_Scripting: tests: enforce correct types in docs 2024-05-07 09:51:53 +10:00
Iampete1 aa7a1ce2a6 AP_Scripting: Docs: fix all type errors 2024-05-07 09:51:53 +10:00
Iampete1 a4a8923e1e AP_Scripting: generator: add return count to manual bindings 2024-05-07 09:51:53 +10:00
Iampete1 439fcb7c46 AP_Scripting: update docs 2024-05-07 09:51:53 +10:00
Iampete1 6e75f7c80f AP_Scripting: update docs generator to show ap_objects as possibly nil 2024-05-07 09:51:53 +10:00
Peter Barker 7319422d6c AP_HAL_Linux: remove unused RC input methods
these protocols have come from AP_RCProtocol for years
2024-05-07 09:49:48 +10:00
Iampete1 95a5169439 AP_Scripting: CAN: `get_device` and `get_device2` return nil if no driver is configure with the correct protocol 2024-05-07 09:48:10 +10:00
Iampete1 632d0a93c1 AP_CANManager: CANSensor: add getter for initialized 2024-05-07 09:48:10 +10:00
Iampete1 f3c32a7c9e AC_AttitudeControl: move `euler_rate_to_ang_vel`, `ang_vel_to_euler_rate` and `euler_accel_limit` to Quaternion attitude 2024-05-07 08:34:40 +09:00
tanghongkai b66ecd8884 AP_Logger: rename class and hwdef related to w25nxx 2024-05-06 12:26:38 +10:00
Gone4Dirt 71a4885c87 AP_MotorsHeli: Add collective and cyclic blade pitch angle logging 2024-05-04 21:36:24 -04:00
Andrew Tridgell b161bdd6a9 AP_AHRS: prevent use of uninitialised EAS2TAS 2024-05-05 07:57:54 +10:00
Andrew Tridgell 53c0619a9a SITL: added Glider SITL model 2024-05-05 07:57:54 +10:00
Andrew Tridgell 4370d2e348 HAL_SITL: added Glider SITL model 2024-05-05 07:57:54 +10:00
mateksys af1ab61f78 AP_HAL_ChibiOS: update MatekH7A3 hwdef for 16MHz xtal 2024-05-04 20:52:50 +10:00
Thomas Watson 0ca37387be AP_Filesystem: guarantee load_file() data is null-terminated
Improves safety of use and clarity of users. Termination is not
included in the reported size to avoid changing user behavior or
misrepresenting the file contents.
2024-05-04 10:15:44 +10:00
Thomas Watson a5764b7413 AP_ROMFS: clarify usage and null termination
Also remove the redundant insertion of the null terminator.
2024-05-04 10:15:44 +10:00
Andrew Tridgell e2767f899f AP_Scripting: allow for 0x00 for 2nd checksum byte in INF_Inject driver
the device does send 0x00 sometimes and data is valid
2024-05-04 07:43:39 +10:00
Jacob Dahl e5ea8f14f4 hwdef: ARKV6X: enable debug console 2024-05-02 15:16:33 -07:00
Jacob Dahl 9f5e837646 hwdef: ARKV6X: UART6 RC SBUS input 2024-05-02 15:16:33 -07:00
Andy Piper f78eb58fb4 AP_InertialSensor: ensure that notches get updated while converging 2024-05-03 07:34:21 +10:00
Iampete1 982cc3a00f AP_DroneCAN: call RPM subscribe 2024-05-02 20:25:38 +10:00
Iampete1 dff29a5015 AP_RPM: add DroneCAN backend 2024-05-02 20:25:38 +10:00
Iampete1 23989bc569 AP_RPM: add DC_SEND_ID for periph RPM stream 2024-05-02 20:25:38 +10:00
Andrew Tridgell c628e31c0a AP_Scripting: fixed crc and added logging to INF_Inject driver 2024-05-02 12:17:49 +10:00
Andy Piper 30877cf11f AP_InertialSensor: allow FIFO rate logging for hires sampling 2024-05-02 11:01:20 +10:00
Andy Piper b1e7974453 AP_HAL_ChibiOS: add highres sampling to Pixhawk6X 2024-05-02 11:01:20 +10:00
Peter Barker d1de760ee4 AP_Scripting: enable AP_Scheduler for CubeOrange-periph-heavy
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
2024-05-01 17:53:44 +10:00
Peter Barker f44dd9605d AP_HAL_ChibiOS: enable AP_Scheduler for CubeOrange-periph-heavy
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
2024-05-01 17:53:44 +10:00
Peter Barker 549411133b GCS_MAVLink: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
Peter Barker f9c5c02f91 AP_RCProtocol: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
Peter Barker 6f42556951 AP_Radio: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
Peter Barker f6bfd7cad3 AP_HAL: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
Peter Barker c521a5edfe AP_HAL_ChibiOS: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
Peter Barker 6d9a75b5ec AP_BoardConfig: move handling of AP_Radio RC input down into AP_RCProtocol 2024-05-01 17:51:49 +10:00
Henry Wurzburg c91fe8a44f AP_Motors:explain PMWRange/Angle PWM types in metadata 2024-05-01 17:26:44 +10:00
Iampete1 97449b0572 AC_Avoid: add "BACKZ_SPD" vertical backup speed limit parameter 2024-05-01 17:25:07 +10:00
richaravoil af3be52925 AP_HAL_ChibiOS: adding active UART in the bootloader
Adding USART6 to be active in bootloader phase to allow flashing with a serial connection.
2024-05-01 17:21:30 +10:00
Andy Piper f38faaae99 AP_HAL_ChibiOS: iFlight Blitz H7 Pro 2024-05-01 17:19:05 +10:00
Daniel Field 33892aa049 SITL: modifications to lift in SIM_StratoBlimp (#3)
* Update SIM_StratoBlimp.cpp

* Update SIM_StratoBlimp.h
2024-05-01 15:45:22 +10:00
Peter Barker c08d982c0c SITL: populate speed accuracy uBlox messages from SITL parameters 2024-05-01 10:19:58 +10:00
Andrew Tridgell 68b58d5435 AP_Compass: workaround hardware bug in IST8310 whoami
the WAI (whoami) register is writeable. Not only is it writeable, but
the written value is persistent across a power cycle. You have to
remove power for about 30s for it to finally go back to the right
default value of 0x10

this makes using WAI as a test for finding a IST8310 problematic. The
best we can do is send a soft reset which will reset it to default for
us to then check
2024-05-01 09:24:54 +10:00
Andy Piper 41fd7c726e AP_IOMCU: allow up to 16 channels of servo data to be sent to the iomcu 2024-05-01 08:21:01 +10:00
Peter Barker dce3a41657 SITL: add description for SIM_BARO_DRIFT 2024-04-30 16:39:32 +10:00
Peter Barker 527e621a57 AP_Baro: accumulate altitude drift in place of raw calc
currently we set drift based on current boot time.  If you want to introduce it at some stage in a flight the baro alt will suddenly jump based on how long you've been up.

Instead, accumulate a delta
2024-04-30 16:39:32 +10:00
Andy Piper 25b10fb8c4 AP_HAL: make NeoPixel high-low proportions match for 0 and 1 2024-04-30 11:00:30 +10:00
tanghongkai 0dac7d5cfe AP_Logger: add support to w25n02kv 2024-04-30 10:58:12 +10:00
Ryan Friedman b81a5deefe AP_ExternalAHRS: Add pre-arm for misconfigured EAHRS_SENSORS and GPS_TYPE
* This catches when there's a mismatch of GPSx_TYPE and EAHRS_SENSORS
  when GPS is enabled
* Before this pre-arm, failure to set GPS_TYPE2 to 21 (ExternalAHRS)
  resulted in silent rejection of the data in AP_GPS because the default
is off
* And fix a little logging bug

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-04-30 09:18:46 +10:00
Iampete1 1b1ce9530c AP_Common: add `get_distance_NED_alt_frame` method 2024-04-30 08:03:39 +09:00
Iampete1 1cdff47246 AP_Mission: add support for DO_RETURN_PATH_START 2024-04-30 08:03:39 +09:00
Brad Bosch e8d2097ec4 GCS_MAVLink: Avoid serial passthrough buffer exhausted/lost data
Just don't read more than we can write.
2024-04-29 20:06:43 +10:00
Hubert 890a83166d hwdef: Fix MicoAir743 internal compass rotation 2024-04-29 07:43:57 +10:00
Peter Barker 0a3ff72fd8 AP_Baro: correct placement of field elevation #endif
wind compensation and field elevation should be unrelated
2024-04-28 18:02:29 +10:00
Andrew Tridgell 202cc6ae9d SITL: fixed param meta-data name 2024-04-28 06:48:25 +10:00
Andrew Tridgell 4bb5a9ac52 HAL_SITL: link in StratoBlimp 2024-04-27 22:03:05 +10:00
Andrew Tridgell 1976f3d2d6 SITL: added StratoBlimp simulator 2024-04-27 22:03:05 +10:00
Iampete1 0a3bdbfdc9 Filter: NotchFilter: return NaN for `logging_frequency` if not initialised 2024-04-24 17:30:35 +10:00
Hubert 84900473de AP_HAL_ChibiOS: added NxtPX4v2
Update README.md

Update NxtPX4v2_BackView

Hwdef Remove: define HAL_GPIO_LED_OFF 0
2024-04-24 13:57:48 +10:00
aditya 9abcd6b7ca AP_ESC_TELEM: solved the logical error in grouping of escs into 4 2024-04-24 08:10:02 +09:00
Paul Riseborough 3c8b3be7a7 AP_NavEKF3: Change yaw source to stop compass use when calibrating 2024-04-23 15:19:56 +09:00
Andrew Tridgell fe42171268 AP_GPS: make get_RelPosHeading boolean 2024-04-23 10:32:43 +10:00
Hubert d1d71db8a0 AP_HAL_ChibiOS: add hwdef MicoAir743
Update README.md

Co-Authored-By: Henry Wurzburg <hwurzburg@yahoo.com>
2024-04-23 09:56:23 +10:00
Henry Wurzburg 4d7e4d1ca9 Revert "hwdef: bdshot version of the MatekF765-SE"
This reverts commit ac86bd8d21.
2024-04-23 09:52:01 +10:00
Michael du Breuil ff7a215dd0 AP_Baro: Do not cache EAS2TAS conversions
Caching this introduces discontinuities in TECS, as the step change
modifies the target speed demand.
2024-04-23 09:32:27 +10:00
Iampete1 30fdae880f SITL: allow disabling MAVLink simstate messages 2024-04-23 09:16:55 +10:00
Iampete1 64b57de559 AP_HAL_SITL: call `_sitl->set_stop_MAVLink_sim_state()` when alocating elrs 2024-04-23 09:16:55 +10:00
Iampete1 700804a015 SITL: add ELRS simulator 2024-04-23 09:16:55 +10:00
Iampete1 cbd5bcb694 AP_HAL_SITL: SITL_State_common: add elrs and pass portnumber in `create_serial_sim` 2024-04-23 09:16:55 +10:00
Iampete1 b0ceaa7610 AP_HAL_SITL: use DataRateLimit helper 2024-04-23 09:16:55 +10:00
Iampete1 92adcb14e1 AP_HAL: utility: Add Data Rate Limit helper 2024-04-23 09:16:55 +10:00
Daniel Li f47998ed8a hwdef: Fix Aocoda-RC H743Dual motor 5-8 mis-labeled issue 2024-04-22 12:03:33 +10:00
Ferruccio Vicari 1c104557b7 AP_Motors: fix heli yaw behavior in autorotation 2024-04-18 11:13:50 -04:00
Peter Barker c5f4fe9a8a AP_Baro: remove Baro accumulate API
no backend actually needs to be prodded, everything is done on timers
2024-04-18 09:19:20 +10:00
Tatsuya Yamaguchi 8874c1a560 AP_HAL_SITL: added HEXA X 2024-04-18 08:25:41 +10:00
Peter Barker bf63729d31 SRV_Channels: gate method on scripting being enabled
also AP_Scheduler since we're calling and instance method on it
2024-04-18 08:25:15 +10:00
Peter Barker ee038cdf1f GCS_MAVLink: adjust for AP_SCHEDULER_ENABLED being false 2024-04-18 08:25:15 +10:00
Peter Barker 35dbf93e13 AP_Scheduler: fixes for AP_SCHEDULER_ENABLED 2024-04-18 08:25:15 +10:00
Peter Barker fe9bcb9b5b AP_Vehicle: cope with AP_Scheduler not being available 2024-04-18 08:25:15 +10:00
Iampete1 8f2b2cfe31 Filter: HarmonicNotchFilter: convert harmonics as a bitmask 2024-04-17 22:15:22 +01:00
Iampete1 cd0bdda93d AP_Param: add convert_bitmask_parameter_width method 2024-04-17 22:15:22 +01:00
Tatsuya Yamaguchi 26ec2ae952 AC_AttitudeControl: fix ATC_SLEW_YAW description (NFC) 2024-04-17 22:18:51 +10:00
Peter Barker b367fd0c1e AP_RCMapper: exclude body of AP_RCMapper based on AP_RCMAPPER_ENABLED 2024-04-17 18:17:56 +10:00
Peter Barker dc692f7169 AP_Arming: exclude body of AP_Arming.cpp based on AP_ARMING_ENABLED 2024-04-17 18:17:27 +10:00