Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
7,084 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

1921 Commits

Author SHA1 Message Date
Robert Lefebvre 6b1fee767a ACM: TradHeli 
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
 2012-11-26 19:37:20 -05:00
Robert Lefebvre 9e45e906fb ACM: TradHeli 
Move some TradHeli #defines into one place in APM_Config to clean up config.h and defines.h
 2012-11-26 19:09:55 -05:00
Robert Lefebvre b32d7c8b63 ACM: TradHeli 
Prevent helis from arming while RSC control is switched on.
 2012-11-26 19:03:28 -05:00
Robert Lefebvre 95eeda7cf7 ACM: TradHeli 
Removing Angle Boost function.
Does not make sense for helis due to aerodynamics.  Can cause more problems than it solves.
 2012-11-26 18:58:21 -05:00
Robert Lefebvre 8056b78c55 ACM: TradHeli 
Remove Rate I-term reset when throttle stick is on the bottom.  This could be very bad for helis since it's plausible to use full downstick while flying.
There is obviously a risk here of building up a false I-term on the ground but this isn't a good solution for that anyway.
Also removed what appears to be some deadwood.
 2012-11-26 18:49:24 -05:00
Robert Lefebvre 637c9a1a72 ACM: TradHeli 
Removing this "throttle" output restriction for TradHelis.
 2012-11-26 18:44:03 -05:00
Andrew Tridgell 5818aaad42 Copter: fixed build error 
thanks to Marco for pointing this out
 2012-11-24 20:39:35 +11:00
Andrew Tridgell f6ec932d63 Copter: added reboot in CLI and over MAVLink 
useful for getting out of CLI
 2012-11-24 18:20:37 +11:00
Andrew Tridgell cd07d965a7 Copter: ported RSSI_PIN option from ArduPlane 
this is useful for OSD users
 2012-11-22 20:59:33 +11:00
rmackay9 3372355e07 ArduCopter: remove commented out remnants of roll_scale_d and pitch_scale_d 2012-11-22 12:50:39 +09:00
rmackay9 eb6d8fca57 ArduCopter: added ReleaseNotes.txt 2012-11-22 09:51:04 +09:00
Robert Lefebvre 6ffc115236 Changes to get_throttle_rate() 
Commented out a bit of code that is not used currently
Change the output constrains to #defines so they can be easily changed, particularly for use in TradHeli.
 2012-11-21 17:11:38 -05:00
Andrew Tridgell dbdb3e1194 ACM: allow fetch of parameters by index 
this makes it more efficient to re-fetch parameters that are missing
 2012-11-22 00:16:57 +11:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Andrew Tridgell 704da2a5d9 MAVLink: make it possible to enter the CLI over the radio 
this only works on the APM2, where UART0 is also the radio port
 2012-11-21 14:11:05 +11:00
Michael Oborne a5e3ce4655 remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
Michael Oborne 0c84b8abf1 fix unit max. and unit type 2012-11-21 07:42:53 +08:00
Andrew Tridgell bcf740a82f ACM: support 16 character parameter names 2012-11-20 21:38:58 +11:00
Andrew Tridgell c008ca7560 ACM: fixed documentation of disabling voltage/current pins for ArduCopter 2012-11-20 20:26:14 +11:00
Andrew Tridgell 69fbcc8683 MAVLink: fixed accel and gyro sensor offsets in MAVLink 2012-11-20 18:32:26 +11:00
rmackay9 810da878e7 ArduCopter: performance monitoring - changed loop counters to uint16_t. 
Removed an unused items from dataflash logging of Performance.
 2012-11-19 11:55:47 +09:00
Andrew Tridgell dafaa2efc8 SITL: disable optical flow on the desktop build 
it doesn't work yet, as no sensor emulator is available
 2012-11-19 09:04:03 +11:00
Andrew Tridgell a3c3c59b82 ACM: fixed some memory cast warnings 2012-11-19 08:42:36 +11:00
rmackay9 07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls 
improved performance logging to dataflash
 2012-11-19 01:16:07 +09:00
Andrew Tridgell 531e62d3b5 MAVLink: improve usefulness of logged GPS velocities 
we need them to align with time to use them for accelerations
 2012-11-17 17:45:30 +11:00
Jason Short 5f57678a9c ACM Nav_throttle- removed sign inversion 2012-11-16 17:38:57 -08:00
Robert Lefebvre 9c6e914bf8 Added Leonard to Contributor List. 2012-11-16 15:43:03 -05:00
rmackay9 e92b560df5 ArduCopter: low baterry failsafe 2012-11-15 23:35:41 +09:00
rmackay9 73ed6c9dbf ArduCopter, APM_RC: failsafe if PPM encoder fails to update for 2 seconds 2012-11-15 23:35:36 +09:00
rmackay9 258442770d ArduCopter: flight mode changes ignored while in throttle failsafe 
reaction time to flight mode changes (when not in failsafe) reduced from 0.6 seconds to 0.1 seconds
 2012-11-13 12:50:51 +09:00
rmackay9 cdfd3f9ccc ArduCopter, ArduPlane: rename ap variable in GCS_Mavlink.pde to resolve compiler warning re shadowing of variable 'ap' 
Changed ArduPlane to keep function consistent with ArduCopter
 2012-11-12 13:30:04 +09:00
rmackay9 dcd98eee78 ArduCopter: remove some variables no longer required with introduction of AP_state 2012-11-12 12:41:25 +09:00
rmackay9 ac5dcc8d49 ArduCopter: remove last remanants of rate_d to resolve compiler warning of unused variables 2012-11-12 12:35:58 +09:00
Jason Short ea7f639ebf ACM: Added fast descent with Bill P's equation for managed accerlation 2012-11-11 18:23:45 -08:00
Jason Short 69db678252 ACM: attitude.pde - adjusted the FF of the alt hold algorithm, the old way was pretty crap. increased the output range of rate controller. 2012-11-11 18:22:54 -08:00
Jason Short c1b759d5d8 ACM: Added a speed filter for throttle cruise, increased alt change rate for alt hold, increased the max climb_rate reporting 2012-11-11 18:17:33 -08:00
Jason Short f344eb875a ACM: Allow greater than 45° pitch and roll in Stab 2012-11-11 18:07:58 -08:00
Jason Short be63481a8c ACM : Logging.pde formatting 2012-11-11 18:06:50 -08:00
Jason Short 9e0b0b9fcd ACM : loging ApState at faster rate 2012-11-11 18:00:10 -08:00
Jason Short 9735a0eff1 ACM: Allow for user defined roll and pitch input max 2012-11-11 18:00:10 -08:00
Andrew Tridgell fddfb0b1a3 MAVLink: update compass health in SYS_STATUS 
this will make it easier to tell if a I2C error occurred in flight
 2012-11-12 11:26:54 +11:00
rmackay9 bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00
rmackay9 e212744f4c ArduCopter: failsafe improvements 
resolves momentary throttle drop to zero before failsafe engages
resolves motor cut after 30seconds if flying in stabilize without GPS (now switches to ALT_HOLD with target altitude zero)
disables motors if throttle was zero before failsafe event
 2012-11-11 22:11:12 +09:00
rmackay9 96872493ae ArduCopter: remove unnecessary debug print mesage from save_trim function 2012-11-10 23:10:29 +09:00
rmackay9 95f6357d35 ArduCopter: fix APM2 build 2012-11-10 22:06:23 +09:00
Jason Short 883bb7cfc0 ACM formatting 2012-11-09 22:15:16 -08:00
Jason Short fb2180ddcd ACM : climb rate option using Bill P's equation 2012-11-09 22:15:16 -08:00
Jason Short 129ec35c35 ACM crosstrack min distance 2012-11-09 22:15:16 -08:00
Jason Short 4b5e0a5046 ACM Logging Events 2012-11-09 22:15:16 -08:00
Jason Short 6dba79e3a7 ACM Log, formatting 2012-11-09 22:15:16 -08:00
Jason Short 549489ddbb ACM : Setup, format 2012-11-09 22:15:16 -08:00
Jason Short ecdc281315 ACM | removing old files 2012-11-09 22:15:16 -08:00
Jason Short d2a5928c06 Ap state updates 2012-11-09 22:15:15 -08:00
Jason Short 4d7b9137fe ACM: Added max RTL altitude 2012-11-09 22:15:15 -08:00
Jason Short bfca0ff9bc ACM: added ap_state.pde 2012-11-09 22:15:15 -08:00
Jason Short 5ad38a32bf ACM : Attitude : added nav param reset 2012-11-09 22:15:15 -08:00
Jason Short 3c78c4a7a3 ACM : Attitude.pde added ap bitfield for failsafe bit 2012-11-09 22:15:15 -08:00
Jason Short a42c6bb609 ACM : Attitude.pde removed stabilize D 2012-11-09 22:15:15 -08:00
Jason Short e4cec91e59 ACM : Arducopter Added ap state bitfield, system bitfield 2012-11-09 22:15:15 -08:00
Jason Short cdabc3878b ACM: Arducopter - remove the stabilize D scheduling 2012-11-09 22:15:15 -08:00
Jason Short d2a0913b2d ACM : formatting 2012-11-09 22:15:15 -08:00
rmackay9 2b714ff7b0 ArduCopter: remove unused functions wrap_360f, wrap_180f and wrap_PI 2012-11-08 15:20:08 +09:00
rmackay9 14cbe37d3e ArduCopter: remove unused get_stabilize_rate_yaw 2012-11-07 23:28:25 +09:00
rmackay9 b13264c884 AP_InertialNav: reanme AP_InertialNav and ThirdOrderCompFilter classes to resolve desktop build compiler errors 2012-11-07 22:24:00 +09:00
rmackay9 ad431d2f25 ArduCopter: fixed HIL build caused by optical flow semaphore changes 2012-11-07 21:13:34 +09:00
rmackay9 cec96a76d7 ArduCopter: comment out InertialNav related Alt Hold and Loiter PID changes from APM_Config.h 2012-11-07 19:21:36 +09:00
rmackay9 1f801714e8 ArduCopter: incorporate new version of inertial navigation 
Moved several navigation functions from ArduCopter.pde to navigation.pde
 2012-11-07 19:21:31 +09:00
rmackay9 d9b4407e64 AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9 a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Andrew Tridgell e8ab62f6e5 ACM: switch to GPS velocity numbers in GLOBAL_POSITION_INT 
these numbers are much more useful than the redundent rotated ground
speed. They tell us exactly what the GPS is giving to AHRS
 2012-11-05 15:23:41 +11:00
Jason Short 8a8ed7a711 ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short 36040461df ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short e138b0a1d7 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
Jason Short 1713279ace ACM: Formatting 2012-10-27 14:13:46 -07:00
Jason Short 5149a8c723 ACM: Added notes, credit to decel code. added speed_min to calc. 2012-10-27 14:13:24 -07:00
Jason Short 73bc90f9b8 ACM: config.h cleanup 
Added LOG_ITERM default to enabled
 2012-10-27 09:59:57 -07:00
rmackay9 cebcc226ee ArduCopter: change TOY_M throttle mode to THROTTLE_HOLD 2012-10-26 10:56:06 +09:00
rmackay9 4877348c49 ArduCopter: remove some unhelpful constraints on nav_lat and nav_lon. 
Increase other constraints from 3200 to 32000.  These constraints are there to ensure int32_t do not cause an overflow when added to an int16_t.
 2012-10-24 22:04:35 +09:00
rmackay9 5e8043fd9c ArduCopter: changed ACRO_ROLL_STABILIZE and ACRO_PITCH_STABILIZE to parameters 
Changes on behalf of Leonard Hall
 2012-10-23 21:30:50 +09:00
Andrew Tridgell 406a5dc328 ACM: save another 20 bytes 2012-10-22 18:59:51 +11:00
Andrew Tridgell 9592be5af7 ACM: saved some more memory for strings 2012-10-22 18:57:08 +11:00
rmackay9 78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
Jason Short 6a40fcd56a ACM : fix compiler warning on non returning function 2012-10-21 14:37:42 -07:00
Jason Short 8842a7dc1b ACM : Cast to int32_T 
Don't think it really needs it, but I feel better with the cast.
 2012-10-21 14:36:05 -07:00
Jason Short a0752dc7dc ACM Acceleration management 
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
 2012-10-21 14:32:39 -07:00
rmackay9 a37a9b5b67 ArduCopter: updated firmware version to 2.8 2012-10-20 09:50:53 +09:00
rmackay9 4395fad6e9 ArduCopter: incremented eeprom format version to force users to accept the new defaults. 
Particularly important is the roll-pitch I term move from the stabilize to rate controllers.
 2012-10-19 16:14:51 +09:00
Pat Hickey d4bb8a10d7 Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Robert Lefebvre bfade7d0ed Fixed that last commit 
#define Stupid_Mistake
 2012-10-18 16:50:42 -04:00
Robert Lefebvre 592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9 1c08e48b4b ArduCopter: updated firmware version to 2.7.4-Zeta 2012-10-18 23:30:28 +09:00
rmackay9 583f2e49a3 ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9 a2a3eed063 ArduCopter: bug fix for telemetry not working on APM1. 
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
 2012-10-18 19:15:21 +09:00
rmackay9 d2912e4e01 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 401fb4101c ArduCopter: removed deprecated mag offset routine. 
Also removed commented-out block of code from navigation.pde.
 2012-10-17 19:47:21 +09:00
rmackay9 9e3c2dd105 ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 8519fe55d3 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 b944d9df26 ArduCopter: bug fix in earthframe->body frame translation. 
Provided by Leonard Hall.

Also removed large unnecessary comments.
 2012-10-17 19:15:25 +09:00
rmackay9 7d7de976c3 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
rmackay9 956b347d68 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 5fbe53a84d ArduCopter: bug fix for get_yaw_rate_stabilized_ef 
Provided by Leonard Hall
 2012-10-17 10:18:24 +09:00
Andrew Tridgell f828956cb8 battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
Robert Lefebvre 063cb41a11 Adding some comments to parameters. 2012-10-15 09:37:02 -04:00
rmackay9 4016f3ba85 ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
LeonardTHall d7b7e1cefa New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
rmackay9 ee5dab9647 ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9 997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9 240b0b43fd ArduCopter: small comment fixes related to battery monitoring 2012-10-13 20:52:14 +09:00
rmackay9 4a41a3d210 ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre dae81d2068 Added #define for Tilt_Compensation. 
Also added some detail to WP_Speed_Max parameter.
 2012-10-12 14:51:31 -04:00
Robert Lefebvre 4e649a381c Added comment detail for Tilt_Comp Parameter. 
Reduced parameter default value for TradHeli.
 2012-10-11 13:17:39 -04:00
rmackay9 1e79d265a1 ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9 cf3e49eea2 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
rmackay9 03933df5b7 ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015 
Updated after discussing with Marco
 2012-10-11 17:25:01 +09:00
rmackay9 35fa50234f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00
rmackay9 2848bb8ee6 ArduCopter: freeze I terms if motor limits breached 2012-10-11 17:20:00 +09:00
Andrew Tridgell 601fe89baa ACM-HIL: fixed optflow declaration 2012-10-11 11:51:25 +11:00
Pat Hickey bbc7f050e5 ArduCopter GCS_MAVLink: COMMAND_LONG for arm/disarm motors 
Date: Wed, 26 Sep 2012 15:56:43 -0700
Subject: ArduCopter arm/disarm command consensus
From: Pat Hickey
To: Michael Oborne
Cc: "Craig J. Elder", arducopter
<arducopter@googlegroups.com>,
    mavelous <mavelous@googlegroups.com>

    Michael,

    Per our discussion today,

    In a MAVLINK_MSG_ID_COMMAND_LONG
    A MAV_CMD of type MAV_CMD_COMPONENT_ARM_DISARM
    with component id MAV_COMP_ID_SYSTEM_CONTROL = 250,
    uses param index 1 to specify an arm/disarm motors event: 1 to arm,
    0 to disarm

    Thanks for working this out with me. Sorry to get it so completely
    wrong the first time around!

    Best
    Pat
 2012-10-10 18:59:55 +08:00
Pat Hickey da374f9043 ArduCopter: Provide AP_Semaphore instance for SPI3 bus on APM2. 2012-10-09 11:39:39 -07:00
rmackay9 b876733c0d ArduCopter: added message to console when entering ESC Calibration on startup 2012-10-09 12:31:05 +09:00
rmackay9 c0ad98be31 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9 fa0963d592 ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV 2012-10-08 12:31:51 +09:00
rmackay9 3c9ba94f42 ArduCopter: bug fix to ROI when no camera mount is specific 2012-10-08 12:31:10 +09:00
rmackay9 7cf60e61b4 ArduCopter: bug fix in earth-frame to body-frame conversion for roll 2012-10-07 19:14:40 +09:00
rmackay9 05fd04134a ArduCopter: fix heli build 2012-10-06 13:46:19 +09:00
rmackay9 61d0c8e35c ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9 af1d6a9b82 ArduCopter: reduce Stabilize Yaw P term to 4.5 2012-10-03 14:19:49 +09:00
rmackay9 e375a27058 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9 ea4f256f8e ArduCopter: BATT_PIN parameter added to allow you to select which pin is used for voltage and current measurements 
To save a parameter, the current sensor pin is assumed to always be 1 higher than the voltage pin.
 2012-10-02 22:16:19 +09:00
Michael Oborne a38fef65c7 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 bae53807b2 ArduCopter: tiny formatting change in defines.h 2012-09-27 17:40:54 +09:00
rmackay9 280488fa5e ArduCopter: bug fix to display ITERM enabled/disabled properly from cli 
Also changed header for this message type to ITERM instead of just IT to make it more clear what it is
 2012-09-27 17:40:30 +09:00
rmackay9 ed881117e0 ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9 fff5d51694 ArduCopter: reduced Loiter Rate I to 0.04 (was 0.08) 2012-09-25 19:08:31 +09:00
rmackay9 a71aa21514 ArduCopter: increase default Loiter Rate P to 5.0 2012-09-25 12:19:44 +09:00
rmackay9 b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9 889d1bb36c ArduCopter: alt hold bug fix - removed reset next_WP in init_home 2012-09-23 01:00:06 +09:00
rmackay9 b3ff368589 ArduCopter: position lead filters modified to use lag which varies by gps 2012-09-20 15:49:09 +09:00
rmackay9 361ff0c08f ArduCopter: allow PID logging of throttle. Make get_angle_boost actually use parameter passed in. 2012-09-18 23:19:23 +09:00
rmackay9 93ae29a3e9 ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
rmackay9 498cbb063b ArduCopter: set fast gains while auto trim is being executed 2012-09-18 09:03:29 +09:00
Andrew Tridgell 5fd39bb928 ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9 6f32f52377 ArduCopter: bug fix in Log_Read_Attitude. It was printing two uninitialised variables. 2012-09-17 13:44:29 +09:00
rmackay9 303ca11c4c HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
rmackay9 b6d2d4723f ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
rmackay9 9e66b555cb ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
Jason Short 072085d2d8 ACM : better debugging text 2012-09-12 23:06:06 -07:00
Jason Short 6b6075ed30 ACM l Prevent pre-mature finish of mission 2012-09-12 23:06:06 -07:00
Jason Short 834f961409 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short 4c8e257ea2 ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Jason Short 34e07c826f ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Jason Short e8e8c27db4 ACM Mavlink - fixed comparison of unsigned to signed int by casting to uint8_t 2012-09-10 20:22:57 -07:00
Jason Short a73bc70553 ACM : Params - formatting cleanup 2012-09-10 20:22:11 -07:00
Andrew Tridgell 841d2700b6 ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9 fd110a2723 ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
rmackay9 42406c827a ArduCopter: added NUM_IMU_SAMPLES_FOR_XYZHZ definitions for MPU6000 and Oilpan to allow more syncing of the mainloop with the arrival of data from the IMU. 2012-09-10 11:37:48 +09:00
rmackay9 5d3ddf1fc9 ArduCopter: bug fix for ROI not working if user did not have a camera mount 
Changed verify_nav_roi command to attempt to point at the target if our camera mount type is not pan_tilt nor pan_tilt_roll
 2012-09-10 02:03:32 +09:00
Andrew Tridgell f97104b435 ACM: use compass.accumulate() in ArduCopter 
this gives us a much less noisy magnetometer
 2012-09-08 10:06:04 +10:00
Michael Oborne c1235c55d5 Fix Approach Altitude min 2012-09-06 17:43:58 +08:00
Pat Hickey b02340fe10 APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
rmackay9 5073e56c06 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9 c9d34c1737 ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2. 
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
 2012-09-02 12:51:23 +09:00
rmackay9 9013d9be43 ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
Craig Elder 274b2e2143 Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Andrew Tridgell e8d928cca4 ACM: added TELEM_DELAY to ArduCopter 2012-08-30 09:03:01 +10:00
Jason Short 51969dca22 ACM Log.pde : whitespace clean up 2012-08-28 21:22:07 -07:00
Jason Short 082913efd4 ACM : revert back to the 2.6 climb rate calc 
The current filter is outputting wild oscillations.
 2012-08-28 21:22:07 -07:00
Craig Elder 4ad516c445 Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking 
Arduplane:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
 2012-08-28 20:09:10 -07:00
rmackay9 2ad6dcb7c4 ArduCopter: increased Stabilize Roll and Pitch I term to 0.05 (was 0.01) based on feedback from Jason 2012-08-29 11:34:53 +09:00
Craig Elder d8a2bfb9e8 Arducopter: Preparing for 2.7.2 Release 2012-08-28 18:30:41 -07:00
Jason Short fd4bc69d77 ACM : Logging updates 2012-08-28 15:40:08 -07:00
Jason Short 9d64bea2ef ACM: Altitude Adjust 2012-08-28 15:40:08 -07:00
Jason Short 98cc65862d ACM : Log Timing 2012-08-28 15:40:08 -07:00
rmackay9 2e9e3ce5a6 ArduCopter: increase SPI bus speed to 2Mhz after IMU initialisation has completed (MPU6000 accepts maximum of 1Mhz for some registers but up to 20Mhz for main sensor and interrupt registers) 2012-08-28 17:29:48 +09:00
rmackay9 b4b394e67e ArduCopter: reduced Rate Roll and Pitch PID values 
RATE_ROLL_P, RATE_PITCH_P reduced to 0.165 (was 0.185)
RATE_ROLL_D, RATE_PITCH_D reduced to 0.004 (was 0.008)
 2012-08-26 10:45:45 +09:00
uncrustify 09fbe8e29a uncrustify ArduCopter/APM_Config.h 2012-08-21 19:19:50 -07:00
uncrustify 429c41155c uncrustify ArduCopter/config.h 2012-08-21 19:19:50 -07:00
uncrustify 969166c4e3 uncrustify ArduCopter/system.pde 2012-08-21 19:19:50 -07:00
uncrustify 841b4ce9c8 uncrustify ArduCopter/test.pde 2012-08-21 19:19:50 -07:00
uncrustify bb6e4ac969 uncrustify ArduCopter/setup.pde 2012-08-21 19:19:50 -07:00
uncrustify 7f89e6c677 uncrustify ArduCopter/motors.pde 2012-08-21 19:19:50 -07:00
uncrustify d49df965f3 uncrustify ArduCopter/navigation.pde 2012-08-21 19:19:50 -07:00
uncrustify 6791da4ee7 uncrustify ArduCopter/commands_logic.pde 2012-08-21 19:19:50 -07:00
uncrustify f783ace0de uncrustify ArduCopter/Attitude.pde 2012-08-21 19:19:50 -07:00
uncrustify 2438cd32fc uncrustify ArduCopter/Parameters.pde 2012-08-21 19:19:50 -07:00
uncrustify 4021a64747 uncrustify ArduCopter/ArduCopter.pde 2012-08-21 19:19:50 -07:00
uncrustify c1ce689e38 uncrustify ArduCopter/Log.pde 2012-08-21 19:19:50 -07:00
uncrustify 6a893c11c7 uncrustify ArduCopter/Parameters.h 2012-08-21 18:57:21 -07:00
uncrustify b9ba41c12a uncrustify ArduCopter/defines.h 2012-08-21 18:57:21 -07:00
uncrustify d0e48755ab uncrustify ArduCopter/config_channels.h 2012-08-21 18:57:21 -07:00
uncrustify 4311b15005 uncrustify ArduCopter/UserVariables.h 2012-08-21 18:56:57 -07:00
uncrustify 3d4ca7aa30 uncrustify ArduCopter/GCS.h 2012-08-21 18:56:56 -07:00
uncrustify 37e00fae80 uncrustify ArduCopter/APM_Config_mavlink_hil.h 2012-08-21 18:56:56 -07:00
uncrustify 42f107706e uncrustify ArduCopter/planner.pde 2012-08-21 18:56:56 -07:00
uncrustify 8dccd9d6b0 uncrustify ArduCopter/sensors.pde 2012-08-21 18:56:50 -07:00
uncrustify df6bdfbd5a uncrustify ArduCopter/UserCode.pde 2012-08-21 18:56:01 -07:00
uncrustify f7a748d43b uncrustify ArduCopter/GCS_Mavlink.pde 2012-08-21 18:56:01 -07:00
uncrustify 30c0328d0c uncrustify ArduCopter/flip.pde 2012-08-21 18:56:01 -07:00
uncrustify 58b5f4e271 uncrustify ArduCopter/GCS.pde 2012-08-21 18:56:00 -07:00
uncrustify c7ff6a6335 uncrustify ArduCopter/toy.pde 2012-08-21 18:56:00 -07:00
uncrustify 1e2c01d8f6 uncrustify ArduCopter/commands_process.pde 2012-08-21 18:56:00 -07:00
uncrustify b6dd8aa592 uncrustify ArduCopter/leds.pde 2012-08-21 18:55:44 -07:00
uncrustify 2d398aa663 uncrustify ArduCopter/commands.pde 2012-08-21 18:55:43 -07:00
uncrustify a75d477071 uncrustify ArduCopter/radio.pde 2012-08-21 18:55:43 -07:00
uncrustify ff0e2e537e uncrustify ArduCopter/events.pde 2012-08-21 18:55:43 -07:00
uncrustify 4303e0bcae uncrustify ArduCopter/limits.pde 2012-08-21 18:55:16 -07:00
uncrustify a20f75e12c uncrustify ArduCopter/inertia.pde 2012-08-21 18:54:57 -07:00
uncrustify 7c8f4421a3 uncrustify ArduCopter/control_modes.pde 2012-08-21 18:54:57 -07:00
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
Andrew Tridgell e9928e78de ACM: fixed TradHeli build 2012-08-22 09:55:31 +10:00
Robert Lefebvre 575b99b4be TradHeli: Creating Flybar Acro mode. 2012-08-21 16:54:01 -04:00
Andrew Tridgell 16e06ea1f4 ACM: build DMP version in autotest 
this gives it a chance of keeping working
 2012-08-21 15:58:59 +10:00
Andrew Tridgell bf2319a0fc AHRS: fixed reference to AHRS var_info for APM and ACM 2012-08-21 15:58:32 +10:00
Andrew Tridgell 1b0f5ac84f ACM: use ahrs.set_fast_gains() on arm/disarm 2012-08-21 15:38:31 +10:00
rmackay9 1d32e03f61 ArduCopter: added ACCEL_ALT_HOLD and INERTIAL_NAV to config.h and commented out of APM_Config.h. 
Reduces possibility of difference between arduino ide compiled code and script built code (i.e. autotester, mission planner)
 2012-08-19 12:31:02 +09:00
rmackay9 75459b09be ArduCopter: changed reset_throttle_counter to uint8_t to get rid of overflow bug that was preventing target altitude from being locked in after pilot input down throttle. 2012-08-19 11:50:35 +09:00
Jason Short c81064279a ACM : removed 2-level DCM gain change - .1 will still be the default. 2012-08-18 15:43:34 -07:00
Jason Short 575a9c4fd1 ACM : Fix for reloading the user DCM gains upon arming 2012-08-18 13:17:43 -07:00
Jason Short 0a25a189eb ACM | Attitude.pde - removed next_wp.alt reset. 2012-08-18 12:25:48 -07:00
Jason Short 988d0c98fc ACM : Alt hold adjustment - made angle boost work during alt hold changes. 
increased length of delay when reverting to automatic hold to deal with latency of baro sensor
 2012-08-18 09:30:46 -07:00
Jason Short 77f47a45d0 ACM : Nav rate limit lowered to prevent bad oscillations due to GPS latency. 2012-08-18 09:04:22 -07:00
Jason Short 522fa58ea5 ACM : temp fix for throttle output limit 
I had a bad crash when I lost authority. The logs showed the throttle pegged at 1000 which killed my control. We went round and round on this and somehow settled on no limit. That wasn't a good idea. This should really be hard coded into the Motors Library, but for now I'm just sticking it here.
 2012-08-18 09:04:22 -07:00
Jason Short bc631b656e ACM: Added a more sane limit to Angle boost 2012-08-18 09:04:21 -07:00
rmackay9 64cfaf74b7 ArduCopter: renamed "_new_alt" parameter to just "new_alt" in force_new_altitude and set_new_altitude functions 2012-08-18 21:46:48 +09:00
rmackay9 5b6f7f0012 ArduCopter: modified altitude hold so that 1 second slow down period is executed after pilot moves throttle back into deadzone 2012-08-18 21:45:49 +09:00
rmackay9 11e946eb54 ArduCopter, ArduPilot: revert mavlink delay callback to be "unsigned long" 2012-08-18 20:34:41 +09:00
rmackay9 2e4e8bbf1a ArduCopter: changed "unsigned long" to "uint32_t" 2012-08-18 19:05:55 +09:00
rmackay9 99859ae42f ArduCopter: added cast to (int) in printf statments. 
Also modified dump_log function's last_log_num to be int16_t to match return type from DataFlash's find_last_log method.
 2012-08-18 18:58:15 +09:00
rmackay9 7a6732fb4b ArduCopter: removed unused icount variable from commands_logic.pde to reduce compiler warnings. 2012-08-18 16:04:23 +09:00
rmackay9 87d5b5944d ArduCopter: commented out get_acro_yaw2 function to reduce compiler warnings 2012-08-18 16:03:49 +09:00
rmackay9 8a6085a3ba ArduCopter: removed unused maggy variable from test.pde to reduce compiler warnings. 2012-08-18 16:03:26 +09:00
rmackay9 07c7c3945d ArduCopter: fixed small bug re arming_counter for TOY mode 2012-08-18 13:21:41 +09:00
rmackay9 92688a793a ArduCopter: fixed compiler warning related to shadowing of control_roll and control_pitch in get_of_roll and get_of_pitch. 2012-08-18 11:48:12 +09:00
rmackay9 8c636ca263 ArduCopter: fix compiler error related to printing boarding type in dataflash logs. 2012-08-18 11:47:10 +09:00
Michael Oborne b2b73cc6cb AC fix some Parameter units 2012-08-18 08:30:16 +08:00
Jason Short 1b7e27658b ACM : removed old note 2012-08-17 17:03:40 -07:00
Jason Short 0ac1373591 ACM Logging - added APM version #, stab_I term logging 2012-08-17 17:03:40 -07:00
Jason Short 387a021c30 ACM : APM_Config.h : default removed for toy mixer. 2012-08-16 15:41:35 -07:00
Jason Short 3ee2fd3fb6 ACM: Config.h - added default for toy mixer 2012-08-16 15:40:28 -07:00
Jason Short 770956a3fd ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP 2012-08-16 15:39:50 -07:00
Jason Short 9cee1b2fa0 ACM : Upped Yaw Limit to 2200 2012-08-16 15:38:46 -07:00
Jason Short bdc1c41e62 ACM: made target bearing the lead filtered location 
Had some major nav trouble from crosstrack if I used the laggy position.
 2012-08-16 15:38:25 -07:00
Jason Short 0f9f72e8ab ACM: added nav_yaw to att logging 
Removed unnecessary casting
 2012-08-16 12:43:55 -07:00
rmackay9 36f947acb9 ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t". 
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
 2012-08-16 20:04:46 +09:00
rmackay9 a72bf6ef57 ArduCopter: replaced abs with labs as required in a few places. 
Also fixed a small bug in the get_stabilize_pitch function in which it was using the roll (instead of pitch) to decide whether it should let the i term build-up or not.
 2012-08-16 17:51:09 +09:00
Jason Short 4d5d16720b ACM Test: Added a return statement 2012-08-15 21:37:23 -07:00
Jason Short 31f31eec75 ACM : Test for bearing calc 2012-08-15 21:04:24 -07:00
Jason Short 99dcbd039d ACM Log : fixed formatting 2012-08-15 21:04:24 -07:00
Andrew Tridgell ed064b2506 MAVLink: enable fetching of single parameters 
this makes it possible for the GCS to fetch a single parameter by
name, which is useful for parameters that change in flight
 2012-08-16 10:14:46 +10:00
Jason Short f1af837543 ACM: Switched to filtered loc 2012-08-14 14:11:52 -07:00
Jason Short cdd2093a4c ACM: Switched to filtered_loc for distance calcs 2012-08-14 14:11:52 -07:00
Jason Short a4bc5950cf ACM: Added a filtered version of Location for GPS lag. 
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
 2012-08-14 14:11:51 -07:00
Jason Short 993c89c4f8 ACM: Revved the version 2012-08-14 14:11:51 -07:00
rmackay9 2a83f1eef2 ArduCopter: remove RTL_LAND parameter as it's been deprecated in favour of APPROACH_ALT. 
Updated comments on ALT_HOLD_RTL and APPROACH_ALT to make it a little easier to understand.
 2012-08-14 12:14:35 +09:00
Jason Short b01a71c4b9 ACM: Toy mode updates - added second toy mode 2012-08-11 22:37:27 -07:00
Jason Short 8160aa6103 ACM : Toy mode updates 2012-08-11 22:37:27 -07:00
Jason Short 1e0ab8768e ACM: Toy mode updates 2012-08-11 22:37:26 -07:00
Jason Short b27c1ce396 ACM : Added check for second Toy mode 2012-08-11 22:37:26 -07:00
Jason Short 11b7475ff9 ACM : Added CH7 multimode triggers, split Toy mode into two 2012-08-11 22:37:26 -07:00
Jason Short 45574c0b1a ACM : CH_7 multimode option added 2012-08-11 22:37:26 -07:00
Jason Short c305237e3a ACM : Added CH_7 Multimode 2012-08-11 22:37:26 -07:00
Andrew Tridgell 3bdc7d41be INS: disable INS AP_Param table when not on APM1 hardware 
this could cause overwriting of memory with default values
 2012-08-11 22:06:03 +10:00
Amilcar Lucas 780b469b11 ArduCopter: Enable the aux servos later, only in the slow periodic loop 
This might solve some of the boot issues some users are having
 2012-08-11 12:58:13 +02:00
Andrew Tridgell 81440a1b09 AHRS: fixed build 
AP_Airspeed.h is now needed to build AHRS
 2012-08-11 12:22:55 +10:00
Andrew Tridgell c2dc920d02 ACM: allow users to set the AHRS_YAW_P and AHRS_RP_P 
the forced set left users with parameters they couldn't use
 2012-08-11 08:35:10 +10:00
Jason Short 3ad08b7ffc ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second. 2012-08-10 10:02:32 -07:00
Jason Short 9a568385b0 ACM increase the minimum speed at WP 2012-08-10 10:01:40 -07:00
Jason Short be0559864c ACM : switched to get_bearing_cd 2012-08-09 17:04:30 -07:00
Jason Short 132ac7d412 ACM : attitude.pde - removed unused function 2012-08-09 17:04:12 -07:00
Jason Short e73c0250ad ACM: Radio.pde - toy mode updates 2012-08-09 17:00:11 -07:00
Jason Short f641c5d077 ACM system.pde - toy mode update, cleanup of throttle cruise code 2012-08-09 16:59:44 -07:00
Jason Short 35839070ad ACM - isolated Toy code 2012-08-09 16:59:44 -07:00
Jason Short adf5939ba4 ACM: navigation - Alt cleanup, fast corner support 2012-08-09 16:59:44 -07:00
Jason Short 6037fabb5c ACM Motors.pde 
Added Toy mode options,
Added DCM kp set to .1(armed) and .8 (disarmed)
 2012-08-09 16:59:44 -07:00
Jason Short 88a94c88b5 ACM : more aggressive and flexible flip code. Will flip right or left, and while pitching hard. 
Increase in throttle is removed from init sequence to remove delay.
 2012-08-09 16:59:44 -07:00
Jason Short d674baadd2 ACM : Events - renamed target alt 2012-08-09 16:59:44 -07:00
Jason Short 07bd1940e7 ACM Defines.h -added Toy mixer enums 2012-08-09 16:59:43 -07:00
Jason Short 26e3d6090e ACM control modes - renames CH_7 flag 2012-08-09 16:59:43 -07:00
Jason Short 3e57f8afd8 ACM: config.h = updated default gains 
More yaw rate control
 2012-08-09 16:59:43 -07:00
Jason Short b5156185cc ACM Commands parser to look for future nav commands to inspect upcoming turn angle 2012-08-09 16:59:43 -07:00
Jason Short d796814dfc ACM : Commands Logic 
Altitude cleanup
 2012-08-09 16:59:43 -07:00
Jason Short 98b8866215 ACM: Added fast corner support 2012-08-09 16:59:43 -07:00
Jason Short 5d756decd2 ACM : Attitude.pde 
yaw limit, moved toy code out of att to it's own pre
 2012-08-09 16:59:43 -07:00
Jason Short 02649f3f11 ACM : Arducopter.pde 
command_nav_index upped to in16t for negative number
renamed trim flag > CH7_flag
Added fast_corner var
removed unused alt vars
Alt hold I term update
 2012-08-09 16:59:43 -07:00
Jason Short 4a56e8ea2c ACM : Toy Mixer options 2012-08-09 16:59:43 -07:00
Andrew Tridgell dc47074dbd MAVLink: removed the need for Mavlink_compat.h 
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
 2012-08-09 12:22:46 +10:00
Andrew Tridgell 2a7b298bbc MAVLink: moved mavlink variables back to library 
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
 2012-08-09 12:06:21 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Amilcar Lucas 0b0b9c29a2 Allow fully independent operation of two AP_Mount instances 2012-08-08 23:11:23 +02:00
Amilcar Lucas 9cc705939a Add a second mount instance 2012-08-08 23:07:25 +02:00
Andrew Tridgell 03714fc695 ACM: make it possible to set AHRS_GPS_GAIN on ArduCopter 
this was affected by the AP_Param change, in particular the
constructor ordering. To ensure a user can set AHRS_GPS_GAIN to 1.0 if
they want to, we need to do a set_and_save() if the value isn't in
EEPROM
 2012-08-08 17:36:01 +10:00
Andrew Tridgell 103b02fe94 ACM: removed pointless load() calls 2012-08-08 16:51:14 +10:00
Andrew Tridgell fb26160d3b ACM: change to use get_bearing_cd() instead of get_bearing() 2012-08-08 12:12:30 +10:00
Andrew Tridgell c2a4d59132 AP_Param: update ArduCopter core for new AP_Param interface 2012-08-08 12:11:57 +10:00
rmackay9 f79b90725e ArduCopter: Dan Gray's fix for Condition_Yaw 
command_yaw_dir is an unsigned byte but was being set to a -ve number leading to very incorrect yaw target heading for counter clockwise turns.
command_yaw_end (i.e. turn's end target) was not being set if turn was of type "relative"
 2012-08-07 06:43:10 -07:00
Amilcar Lucas d9f1140278 ArduCopter: Use generic channel names for AP_Mount servos. 
This simplifies mission planner, the same code can be used for plane and copter now.
 2012-08-06 23:33:51 +02:00
Amilcar Lucas e93daca17e Fix heli compilation 2012-08-06 23:30:02 +02:00