Running the vehicles we check the stack size doesn't grow too much by
enabling the DEBUG_STACK in the scheduler. Even on 64bit boards the
stack is consistent around 4k. Just to be a little conservative, let it
be a little bit more that that: 256kB.
Since we have RT prio and we call mlock(), the memory for the stack of
each thread is locked in memory. This means we are effectively taking
that much memory. The default stack size varies per distro, but it's
common to have 8MB for 64 bit boards and 4MB for 32 bit boards. Here is
the output of ps -L -o 'comm,rtprio,rss $(pidof arducopter-quad)', showing the
RSS of arducopter-quad before and after this change:
Before:
COMMAND RTPRIO RSS
arducopter-quad 12 46960
sched-timer 15 46960
sched-uart 14 46960
sched-rcin 13 46960
sched-tonealarm 11 46960
sched-io 10 46960
After:
COMMAND RTPRIO RSS
arducopter-quad 12 7320
sched-timer 15 7320
sched-uart 14 7320
sched-rcin 13 7320
sched-tonealarm 11 7320
sched-io 10 7320
We don't need all the comments in the array declaration and we can
inline its declaration in the function call. This makes it easier to
copy it to other places.
This bug led to issues for us so it may help others to resolve it.
Currently, the AP_HAL_Linux RCInput::read(uint16_t*,uint8_t) function
only returns the first x nonzero channels. Once it hits a channel that
is set to zero, it stops and all remaining channels are returned as
zero, even if they are set. This causes discrepancies between the raw RC
input sent to the GCS and the RC input that is actually used on the
vehicle.
The fixes this issue and makes it behave exactly as it does on the
PX4_HAL code. We ran into this issue when sending rc_override messages
in which there were some channels set to zero.
0-length arrays are supported in C but forbidden in C++. GCC allows it
but clang is more strict:
../../libraries/AP_HAL_Linux/SPIDriver.cpp:75:35: fatal error: no matching constructor for initialization of 'Linux::SPIDeviceDriver [0]'
SPIDeviceDriver SPIDeviceManager::_device[0];
^
../../libraries/AP_HAL_Linux/SPIDriver.h:20:7: note: candidate constructor (the implicit move constructor) not viable: requires 1 argument, but 0 were provided
class SPIDeviceDriver : public AP_HAL::SPIDeviceDriver {
^
../../libraries/AP_HAL_Linux/SPIDriver.h:20:7: note: candidate constructor (the implicit copy constructor) not viable: requires 1 argument, but 0 were provided
../../libraries/AP_HAL_Linux/SPIDriver.h:25:5: note: candidate constructor not viable: requires 9 arguments, but 0 were provided
SPIDeviceDriver(const char *name, uint16_t bus, uint16_t subdev, enum AP_HAL::SPIDeviceType type, uint8_t mode, uint8_t bitsPerWord, int16_t cs_pin, uint32_t lowspeed, uint32_t highspeed);
^
1 error generated.
This allows us to re-use SPIDevice from SPIDeviceDriver (the
to-become-SPIDeviceProperties) while the drivers are
converted. We create a fake device by calling the temporary
SPIDeviceManager::get_device() method passing the descriptor. The
transfer and assert logic is still using the old code.
Now we can interoperate SPIDeviceDriver with the ones based in
SPIDevice since they are going to use the same semaphore and bus.
The way this code is structured is a little bit different from the
SPIDriver implementation:
- We only open the bus once, no matter how many devices we have in it
- There's a single transfer() method which uses half-duplex mode
instead of full duplex. The reason is that for all cases in the
codebase we are using half-duplex transfers using the full-duplex
API, i.e. a single SPI msg with both tx and rx buffers. This is
cumbersome because the buffers need to be of the same size and the
receive buffer using an offset of the same length as the actux data
being written. This means the high level APIs need to copy buffers
around.
If later we have uses for a real full duplex case it's just a matter
of adding another transfer_fullduplex() method or something like
this.
- The methods are implemented in the SPIDevice class instead of having
proxy methods to SPIDeviceManager as is the case of SPIDriver
Also from now on we refer to the SPIDriver objects as "descriptors"
because they have the parameters of each device in the
SPIDeviceManager::devices[] table. When SPIDeviceDriver is completely
replaced we can rename them to SPIDeviceProperties.
Save in the manager the number of devices so it can be used in other
places like the SPIDevice implementation. This is a temporary storage
while we migrate to SPIDevice.
While at it use protected rather than private.
This allows us to re-use I2CDevice from I2CDriver while the drivers are
converted. We create a fake device with addr = 0 for each I2CDriver but
we only use the register/unregister logic. The transfer logic still uses
the methods from I2CDriver in order to use the right address.
Now we can interoperate I2CDevice drivers with the ones base in
I2CDriver since they are going to use the same semaphore and bus.
The I2CDriver constructors were changed to re-use the logic in I2CDevice
(it uses a number rather than an string) and the semaphore doesn't live
outside anymore, its embedded in the fake I2CDevice, as well as the
bus's file descritor.
This is a similar function to what we have in I2CDriver, but it can
receive a nullptr to recv or send. It will create 2 i2c_msg structs to
send and receive data to/from the I2C slave.
These are very similar to their counterparts in I2CDriver. The changes
were:
- Don't use fixed buffer with PATH_MAX length: allocate the string
- Change the interface to use std::vector so we can simplify the
implementation
Use pthread's barrier so we don't keep waking up threads with possibly
higher priority during initialization phase.
This also synchronizes all of them to a single point. With the previous
approach it was possible (but unlikely) that a thread hadn't reach the
synchronization point when main thread signalize "system initialized".
A string name allows to more easily expand the table: the board is
responsible for the name and doesn't have to declare it as a enum or
define. It's also easier to add 2 sensors of the same type.
This reverts support for RCInput via PWM. This is causing trouble in
some RPI-based boards, receiving a SIGSEGV. Let's revert it for now and
retry this later.
This reverts commit 5629f38b2c.
This reverts commit 51fd0b3d55.
This reverts commit 79d56073f7.
../../libraries/AP_HAL_Linux/RCInput_RPI.cpp: In member function ‘virtual void Linux::RCInput_RPI::_timer_tick()’:
../../libraries/AP_HAL_Linux/RCInput_RPI.cpp:489:127: warning: ‘x’ may be used uninitialized in this function [-Wmaybe-uninitialized]
counter = circle_buffer->bytes_available(curr_pointer, circle_buffer->get_offset(circle_buffer->_virt_pages, (uintptr_t)x));
^
This shrink must be used when the output camera sizes doesn't fit
the expected output.
We don't need to crop it even when the camera sizes aren't squared since
the shrink_8bpp() function shrinks a selected area.
This function shrinks a selected area on a 8bpp image.
The focus in this function was the performance, so this may not be the
clearer or the most understandable way to write it. The performance
was measured using GoogleBenchmark[1].
[1] - https://github.com/google/benchmark.git
Support for perf api using lttng.
Some additional build tricks needed for bebop because lttng uses dl_open
which is not compatible with a static link on a different libc as used
on the bebop
We are not doing any dma here, it's just an SPI transaction. Name them
only rx/tx (although io_packet_tx/io_packet_rx could be another option).
This also zero-initialize the struct to keep valgrind happy about not
calling ioctl() with uninitialized variables.
This disables FRAM usage in PXF and erleboard. The reason is it's
failing and not being used. Right now we get this on startup:
root@beaglebone:~# ./ArduCopter.elf
FRAM: Online
Storage: FRAM is getting reset to default values
Failed to read FRAM
Testing with valgrind also reveals some invalid memory reads. Let's
disable it for now to be common with other boards.
This commit adds support for OpticalFlow to MinnowBoardMax trying to
leave the OpticalFlow implementation as generic as it already is.
We had to add some format conversion and software crop to the cameras that
do not have this features.
Most cameras do not support NV12 or GREY formats, we are adding in this commit
a conversion from YUYV format, that seems pretty common in cameras, to GREY
format (since we do not use Cb and Cr data on OpticalFlow).
Also we are adding a software crop for 8bpp images, such as GREY format. For
the same reason, most cameras do not have support for overlaying (crop, resize
and so on).
These functions are being added in order to be used in the next commits,
where we will add support for OpticalFlow on MinnowBoardMax.
This reverts commit 8cca0beba9.
The PWM input using the RPI DMA is causing trouble with RPI boards using
PPMSUM. Let's revert it until the solution is found. We still leave the
ifdef in RCInput for BH hat.
The initial idea was to export all pins to be used at once, so we
created _export_pins() to take all of them and a wrapper method,
_export_pin() to export a single one. However we never export more than
one pin at once.
- Replaced PATH_MAX by the maximum stack memory it will use for GPIO
paths
- Added more information to error logs
- Removed the '/n' when writing to GPIO sysfs files
- Using Linux Util write_file() on _pinMode()
Make sure pinMode() method exports the pin before using it. Otherwise
the export method would need to be called, differently from other GPIO
implementations.
Since now export_pin and export_pins are called only internally, reduce
their visibility to protected.
These errors were all over the VideoIn.cpp file:
libraries/AP_HAL_Linux/VideoIn.cpp: In member function 'bool Linux::VideoIn::allocate_buffers(uint32_t)':
libraries/AP_HAL_Linux/VideoIn.cpp:107:15: error: invalid conversion from 'uint32_t {aka unsigned int}' to 'v4l2_memory' [-fpermissive]
rb.memory = _memtype;
^
libraries/AP_HAL_Linux/VideoIn.cpp: In member function 'bool Linux::VideoIn::set_format(uint32_t*, uint32_t*, uint32_t*, uint32_t*, uint32_t*)':
libraries/AP_HAL_Linux/VideoIn.cpp:169:14: error: invalid conversion from 'int' to 'v4l2_buf_type' [-fpermissive]
fmt.type = V4L2_CAP_VIDEO_CAPTURE;
^
Add proper casts to fix the compilation.
Let it be a static const member instead of defining it in a header. The
problem with the header is that it will generate conflicting symbols
when more than 1 compilation unit includes it.
- Remove commented out defines
- Sort headers
- Remove ifdef for HAL_BOARD_SUBTYPE_LINUX_BEBOP inside the same ifdef
- Use AP_HAL::panic() instead of perror
- AP_HAL::panic() message doesn't take a '\n' and there's no return
statement after a call to this function
- Fix pointer placement
- Use pragma once
- Don't initialize members to 0, it's already the default behavior of
our custom allocator
Implementation of AP_HAL::OpticalFlow for an embedded camera sensor
There is the possibility to record video and also the gyro datas in order
to process the video off-board and debug possible issues.
Implementation of the PX4 flow algorithm for ardupilot.
Based on the original PX4 Flow code, it has diverged a lot.
I have kept the license header since it is required.
I have removed all the unused and dead code on current implementation,
modified the code to make it clearer, re-indented it and changed
the way some params are calculated. It has been tested on PC and
on board and showed results that I assumed were OK. No optical flow
Loiter tests have been undertaken since it requires a Sonar which will
be added soon.
Limitations :
Some parts were written in ARM assembly and I rewrote them very naively
to get them to be more easily portable. A simple optimisation would be
to re-introduce assembly code for ARM as a separate asm file with
methods for fixed resolutions that would reduce a lot the amount of
calculation and memory read/writes. Then writing a version in NEON
assembly would even be more optimised and then maybe an Intel version.
- No need to if/else if just returning
- Sort includes
- Fix missing space in log message
- When closing the fd, set it to -1. It's better to later fail the
operation than to operate on another random file descriptor
- Add some spaces to improve readability
- Use pragma once
- Do not initialize members to zero, it's already the behavior for our
custom allocator
VideoIn class is created that allows to setup a v4l2 interface
and capture buffers. I is based on yavta utility by Laurent Pinchart
and has been tested only on the bebop, though yavta works on any linux
platform.
- Replace tabs with spaces
- Sort includes
- No need to ifdef Linux inside AP_HAL_Linux
- Use early returns on error rather than a chain o if/else
- Use pragma once
- No need to initialize class members to 0, it's already our default
behavior
The camera sensor is connected on i2c bus for config
and on a parallel bus on the main SoC.
Currently, the i2c driver remains userland, but this is intended to
change in the future. The v4l2_subdev part is the way to go in the future
and it is the mainline way of configuring i2c camera sensors on Linux.
Currently only the max framerate is supported because it is the one that
is to be used on the bebop optical flow.
Newer esc firmware versions on bebop 1 and all the versions on bebop 2
have a different order for the motors in the i2c frame sent to the
esc contoller. This commit adds support for both versions by reading
the firmware version of the esc, using GET_INFO frame
This was previously used to allow to save a state in a SPIDriver so we
could synchronize the initialization of AP_Compass and
AP_InertialSensor.
It was only used by MPU9250 and is not used anymore since the move to
AuxiliaryBus initialization and it's not used anymore since c3dae6f
("AP_InertialSensor: MPU9250: Remove methods not used anymore")
As commented in 8218140 ("AP_Common: add scanf format macro"), "FORMAT"
was a bad name for this macro since there's also the scanf. Rename to
FMT_PRINTF to follow the scanf name.
Only compiled on Bebop, the constructor will need to be modified to
pass the pwm chip number and to create a PWM_Sysfs instead of a PWM_Sysfs_Bebop
in case it is used on a mainline linux board
- Make error path in constructor shorter and earlier. It's calling
panic() so there's no reason to do anything else
- We don't need to check variable for NULL when calling free()
- Change set/get_polarity to use a virtual function; this allows us
not to fail silently if _polarity_path is NULL for PWM_Sysfs.
PWM_Sysfs_Bebop just overrides this method and implement an empty
version.
Modify existing class to create a PWM_Sysfs_Base class and derive it for
Bebop and Pwm_Sysfs (mainline kernel)
use asprintf for path allocation since it doesn't cost so much and is done
only at startup
Note that the constructor of the 2 classes : PWM_Sysfs and PWM_Sysfs_Bebop
allocate the paths and the constructor and desctuctor of class PWM_Sysfs_Base
frees them.
only keep in memory the paths that are needed later, i.e free _export_path,
_duty_path. The remaining path are freed in the destructor
Implement the new AP_HAL functions and use them in the Scheduler when
possible.
The '_sketch_start_time' was renamed and moved as a detail of
implementation of the functions code. It allows the code to return time
starting from zero.
The 'stopped_clock_usec' was renamed to follow convention in the file
and add a getter so that AP_HAL functions can reach it. It's not a
problem this getter is public because in practice, regular code
shouldn't even access the Linux::Scheduler directly -- only code that
should is from Linux implementation.
For certain basic functionality, there aren't much benefit to be able to
vary the implementation easily at runtime. So instead of using virtual
functions, use regular functions that are "resolved" at link time. The
implementation of such functions is provided per board/platform.
Examples of functions that fit this include: getting the current
time (since boot), panic'ing, getting system information, rebooting.
These functions are less likely to benefit from the indirection provided
by virtual interfaces. For more complex hardware access APIs the
indirection makes more sense and ease the testing (when we have it!).
The idea is that instead of calling
hal.scheduler->panic("on the streets of london");
now use
AP_HAL::panic("on the streets of london");
A less important side-effect is that call-site code gets
smaller. Currently the compiler needs to get the hal, get the scheduler
pointer, get the right function pointer in the vtable for that
scheduler. And the call must include an extra parameter ("this"). Now it
will be just a function call, with the address resolved at link time.
This patch introduces the first functions that will be in the namespace,
further patches will implementations for each board and then switch the
call-sites. The extra init() function allow any initial setup needed for
the functions to work.
When there is already a driver registered on an i2c bus, the I2C_SLAVE ioctl
returns an error.
When it happens, it is better to display a warning and try to force the address.
It is especially useful on the bebop when killing the regular autopilot that uses
iio drivers to access the imu because else we would need to manually unbind the
driver in an init procedure.
I have added a warning because this error can also be resulting of another cause.
If the error is not EBUSY, then panic
If the I2C_SLAVE_FORCE ioctl fails then we panic because one of the i2c devices
won't be working properly.
This include some minor changes on all methods of PWM_Sysfs:
- Sort headers
- Add code inside Linux namespace rather than just use the namespace
- Declare a union pwm_params, that's only used to calculate at compile
time the maximum stack space we need in our methods: this is a bit
safer for future extensions
- Standardize error messages to include the useful params first and
then the error message
- Remove log message from hot path
- Don't abuse macros for checking error - convert the SNPRINTF_CHECK
macro into proper code, ignoring errors for not enough space since
they can't happen
- Fix call to read_file() passing uint8_t for "%u" in get_period()
- Fix passing char** instead of char* to write_file() in set_polarity()
- Use strncmp() instead of strncasecmp() since the kernel API uses
lowercase.
- Add comments on the 2 main methods of this class
With commit 24f4153 ("AP_HAL_Linux: RCOutput_PCA9685: group writes") a
log was introduced when we can't get the bus semaphore. However since we
are calling the non blocking method, failing there is not that unlikely
if the bus is shared. Return back to the previous behavior of not
logging.
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.
AVR-specific places were not changed.
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
ardupilot/libraries/AP_HAL_Linux/Storage_FRAM.cpp: In member
function 'int32_t Linux::Storage_FRAM::read(uint16_t, uint8_t*, uint16_t)':
/home/lucas/p/dronecode/ardupilot/libraries/AP_HAL_Linux/Storage_FRAM.cpp:183:24: war
ning: comparison is always false due to limited range of data type [-Wtype-limits]
if(Buff[i-fptr]==-1){
^
This commit adds the class Linux::GPIO_Sysfs. This class provides a generic
implementation of AP_HAL::GPIO on Linux by using GPIO Sysfs Interface
(https://www.kernel.org/doc/Documentation/gpio/sysfs.txt).
The channel() interface should be preferred in places that need to be
fast. Since it maintains the file descriptor open this is much faster
than opening and closing it.
We are using a microcontroller to read the PWM input from RC. The read
values are sent to our board using a simple serial protocol through the
UART interface.
This patch interprets these values and passes them forward to the APM.
Move the macros to a single place and reduce the variations not based on
board, but based on
- The name of the entry-point function, specified by AP_MAIN;
- Whether it contains argc/argv arguments or not.
The goal here is that programs (vehicles and examples) don't need to
include all possible boards to define a main function. Further patches
will change the programs.
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.
A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.
The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.
Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.
The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
This warning happens because of the difference of datatypes between
32 and 64 bits processors.
%% libraries/AP_HAL_Linux/RCInput_UDP.o
/home/zehortigoza/dev/ardupilot/libraries/AP_HAL_Linux/RCInput_UDP.cpp: In member function 'virtual void Linux::LinuxRCInput_UDP::_timer_tick()':
/home/zehortigoza/dev/ardupilot/libraries/AP_HAL_Linux/RCInput_UDP.cpp:42:72: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 3 has type 'uint64_t {aka long unsigned int}' [-Wformat=]
hal.console->printf("no rc cmds received for %llu\n", delay);
It uses a heating resistor controlled by a pwm.
By changing the duty cycle of the pwm, we can control the temperature.
A simple PI algorithm is used in order to get to the correct temperature
fast enough and without too much overshoot
It is implemented as a member of the Util class in order not to make to much
modification to the current codebase
Fix warning and use htole16 instead of trying to implement it.
The current code does nothing on little endian platforms.
Moreover, the status variable was unused.
Instead of just doing a static cast to the desired class, use a method
named "from". Pros:
- When we have data shared on the parent class, the code is cleaner in
child class when it needs to access this data. Almost all the data
we use in AP_HAL benefits from this
- There's a minimal type checking because now we are using a method
that can only receive the type of the parent class
It's possible to use the internal clock in PCA96895 if we account for
the drift it contains. This is a bit different from solutions in other
projects like the Adafruit library and the PX4 firmware: instead of
applying a correction to the final frequency we apply the correction to
the clock since this is the source of the error.
With this fix we arrived to much better results across different lots of
sensors.
The Navio board continues to use the external clock and should have no
difference behavior.
This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
this makes it possible to bootup ardupilot before the desired network
interface is available. This is very useful for when using 3G dongles
in aircraft
The current implementation doesn't throw an error on a malformed path string.
i.e. udp:192.168.1.1.14550 instead of udp:192.168.1.1:14550 may result in a memory leak or whatsoever.
The commit fixes the issue and outputs a nice error message if anything's wrong.
DMA is getting stopped in the separate method now. This is the best we
can get at the current time. It does yield slightly better experience
and works in the majority of cases.
The patch is a no bulletproof solution, though.
There's a possibility of corruption in case of e.g. a SIGKILL. There's
no signal framework at the time and the commit doesn't add one. That's
why all signals are handled in the same erroneous way. This is not a
good nor a final solution to the issue.
For the issue at hand a better fix might be porting the code to kernel
space but it's a rather tediuos task that we cannot undertake in the
couple of weeks.
The issue has already come up. There's no deinitialization mechanisms at the moment. As APM is rather software than firmware on Linux, there're some clean-up work that needs to be done. This commit triggers deinitialization of RCInput on a panic.
Allowing to change the SPI device state allows us to save the
information whether the device was already initialized and avoid 2
separate drivers to initialize it.
The value for LINUX_STORAGE_SIZE was defined inconsistently against the one
defined for Linux boards in HAL_STORAGE_SIZE. That led to some values not
being written to the storage when running the test binary built at
libraries/StorageManager/examples/StorageTest.
The device number in /dev may not be reliable from one boot to another
due to the initialization order of each bus.
For example, in Minnow Board Max, the exposed I2C buses may be i2c-7 and
i2c-8 or i2c-8 and i2c-9 depending if the platform driver in the kernel
is initialized before or after the PCI.
It also may change with different version and configuration of the DT or
UEFI used making another kernel driver to bind to the device. This means that
for Minnow Board Max we need to use something like below to pass to the
constructor:
static const char * const i2c_devpaths[] = {
/* UEFI with lpss set to ACPI */
"/devices/platform/80860F41:05",
/* UEFI with lpss set to PCI */
"/devices/pci0000:00/0000:00:18.6",
NULL
};
The devpath here is the one returned by udev with the following command:
udevadm info -q path /dev/<i2c-device>
In contrary to the device number in /dev/i2c-N, this path in sysfs is
stable across reboots and can only change if there's a change in the
UEFI firmware or the board's device tree.
This patch assumes the currently supported boards don't have this
problem so it's not touching them.
Instead of hardcoding 8 as the limit for I2C msgs, use whatever the
kernel exported to us. In upstream this is 42 so it means we can group
together 21 addr/data pair instead of only 8.
All threads share the same address space and have the same pages locked
into memory so it's not necessary to call mlockall() for each of them.
Grepping /proc/<tid>/status gives the same VmLck for all of them, even
when only the main thread locks the memory:
# for i in `seq 477 482`; do \
name=$(cat /proc/$i/comm); \
vm=$(cat /proc/$i/status |grep VmLck); \
echo -e "$name\t$vm"; \
done
ArduCopter.elf VmLck: 57868 kB
sched-timer VmLck: 57868 kB
sched-uart VmLck: 57868 kB
sched-rcin VmLck: 57868 kB
sched-tonealarm VmLck: 57868 kB
sched-io VmLck: 57868 kB
Use pthread_setname_np() to set thread name so it's easier to debug
what't going on with each of them. This is the example output of the
relevant par of "ps -Leo class,rtprio,wchan,comm":
FF 12 futex_ ArduCopter.elf
FF 15 usleep sched-timer
FF 14 hrtime sched-uart
FF 13 poll_s sched-rcin
FF 11 hrtime sched-tonealarm
FF 10 hrtime sched-io
It's undefined behavior to pass the callback to pthread to a class
member like we were doing. Refactor the code so the callbacks are static
members.
This fixes the following warnings:
libraries/AP_HAL_Linux/Scheduler.cpp: In member function 'virtual void Linux::LinuxScheduler::init(void*)':
/home/lucas/p/dronecode/ardupilot/libraries/AP_HAL_Linux/Scheduler.cpp:61:76: warning: converting from 'void* (Linux::LinuxScheduler::*)()' to 'Linux::LinuxScheduler::pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
(pthread_startroutine_t)&Linux::LinuxScheduler::_timer_thread);
^
libraries/AP_HAL_Linux/Scheduler.cpp:65:76: warning: converting from 'void* (Linux::LinuxScheduler::*)()' to 'Linux::LinuxScheduler::pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
(pthread_startroutine_t)&Linux::LinuxScheduler::_uart_thread);
^
libraries/AP_HAL_Linux/Scheduler.cpp:69:76: warning: converting from 'void* (Linux::LinuxScheduler::*)()' to 'Linux::LinuxScheduler::pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
(pthread_startroutine_t)&Linux::LinuxScheduler::_rcin_thread);
^
libraries/AP_HAL_Linux/Scheduler.cpp:73:76: warning: converting from 'void* (Linux::LinuxScheduler::*)()' to 'Linux::LinuxScheduler::pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
(pthread_startroutine_t)&Linux::LinuxScheduler::_tonealarm_thread);
^
libraries/AP_HAL_Linux/Scheduler.cpp:77:76: warning: converting from 'void* (Linux::LinuxScheduler::*)()' to 'Linux::LinuxScheduler::pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
(pthread_startroutine_t)&Linux::LinuxScheduler::_io_thread);
LinuxScheduler::init() was not really working as it should. This was the
result of "ps -Leo class,rtprio,wchan,comm | grep ArduCopter":
FF 12 futex_ ArduCopter.elf
FF 12 usleep ArduCopter.elf
FF 12 hrtime ArduCopter.elf
FF 12 poll_s ArduCopter.elf
FF 12 hrtime ArduCopter.elf
FF 12 hrtime ArduCopter.elf
As can be seen all the threads run with the same priority, the one of the main
thread. There were basically 2 mistakes:
1) pthread_attr_setschedpolicy() needs to be called before
pthread_attr_setschedparam(). Otherwise the latter will just return
an error and not set the priority
2) pthread_create() defaults to ignore the priority and inherit the
it from the parent thread. pthread_attr_setinheritsched() needs to
be called to change the behavior to PTHREAD_EXPLICIT_SCHED. See
pthread_attr_setinheritsched(3) for an example program to test the
behaviors.
Also, it's undefined behavior to call pthread_attr_init() several times on the
same pthread_attr_t. Although we could reutilize the same attribute without
calling pthread_attr_init() again, lets refactor the code a little bit, so all
the pthread calls are in a single place. Then also call pthread_attr_destroy()
when we are done.
In Linux the default stack size is always greater than 32k, either 2MB
or 8MB depending on the architecture. There's no point in creating a
function to lock 32k.
Ricardo de Almeida Gonzaga
Lucas De Marchi
Staroselskii Georgii
Andrew Tridgell
Julien Beraud
Rustom Jehangir
mirkix
Randy Mackay
raspilot
Pritam Ghanghas
Gustavo Jose de Sousa
mirkix
Aaron Wang Shi
Víctor Mayoral Vilches
Víctor Mayoral Vilches
pkancir
José Roberto de Souza
Caio Marcelo de Oliveira Filho
Fabio Mello
dgrat
Fredrik Hedberg
Jean-Baptiste Dubois
Vladislav Zakharov
Mikhail Avkhimenia