Andrew Tridgell
eeb97800ae
AC_AttitudeControl: allow for tail pass-thru in ACRO mode
...
this allows for all channels to be passed through
2015-06-26 12:45:38 +09:00
Randy Mackay
1e3e65e443
AC_AttControl: add shift_ef_yaw_target
...
This allows shifting the target heading in case the EKF shifts it's
heading estimate
2015-06-24 11:49:32 +09:00
Leonard Hall
cfc388934b
AC_AttControl: add set_accel_roll_max
...
Also equivalents for pitch and yaw
2015-06-18 23:06:33 +09:00
Randy Mackay
d2f93dd379
AC_PosControl: init flags
...
Resolves warning from Coverity
2015-06-08 14:46:32 +09:00
Randy Mackay
382f5d087f
AC_PosControl: explicitly set set_alt_target_from_climb_rate params
2015-06-05 15:51:02 +09:00
Randy Mackay
6ea60aa662
AC_PosControl: remove default from set_alt_target_from_climb_rate
2015-06-05 15:15:03 +09:00
Randy Mackay
11fee21f06
AC_PosControl: init accel_last_z_cms
2015-06-05 15:06:34 +09:00
Robert Lefebvre
4da54783fd
AC_AttitudeControl_Heli: Semantic Change. Motor Runup to Rotor Runup.
2015-05-29 17:46:23 +09:00
Robert Lefebvre
18bac524a3
Copter: TradHeli, change Rate FF LPF to 10Hz
2015-05-29 17:46:05 +09:00
Andrew Tridgell
521dae1c65
AC_AttitudeControl: use set_desired_rate() on PID controllers
...
this sets them up for logging of PIDs
2015-05-27 14:28:49 +10:00
Robert Lefebvre
353879cd2b
AC_AttitudeControl_Heli: Add Rate Accel FF to Yaw control
2015-05-27 14:28:47 +10:00
Robert Lefebvre
810b12a1ac
AC_AttitudeControlHeli: Change Rate Yaw FF LPF from 5Hz to 10Hz.
2015-05-27 14:28:46 +10:00
Robert Lefebvre
23adf2773c
AC_AttitudeControl: Remove To-Do comments for Attitude Rate logging.
2015-05-27 14:28:44 +10:00
Robert Lefebvre
915236f1f5
AC_AttitudeControl: Non-functional comment change
...
Don't encourage future misuse of g.rc3
2015-05-25 22:13:37 +09:00
Robert Lefebvre
e87ca6de6f
AC_PosControl: Change motors.get_throttle_out
...
to get_throttle to follow function renaming in AP_Motors
2015-05-25 22:13:34 +09:00
Randy Mackay
d1808c645d
AC_PosControl: recalc leash length on speed or accel change
...
This resolves an issue in which do-set-speed would not take effect until
one waypoint too late in a mission.
2015-05-19 18:16:39 +09:00
Tom Pittenger
4f1dd2c8a4
AC_AttitudeControl: compiler warning stuff
...
float to double promotion via cos & sin instead of cosf & sinf
(this code is commented out but in case it ever gets included it would be nice to be correct
2015-05-16 08:21:36 +10:00
Tom Pittenger
70bef20a29
AC_AttitudeControl: replace fabs() with fabsf()
2015-05-09 09:57:26 +10:00
Randy Mackay
3781f133d7
AC_AttControlHeli: remove unused definitions
2015-05-08 14:50:38 +09:00
Randy Mackay
bef5633ed5
AC_AttControlHeli: use params from parent class
2015-05-08 14:50:36 +09:00
Randy Mackay
7951346d72
AC_AttControl: bf_feedfoward_save made more concise
2015-05-08 14:29:49 +09:00
Leonard Hall
cf45a1cf3a
AC_AttitudeControl: add get accel and save ff
2015-05-08 14:14:30 +09:00
Leonard Hall
1900cc7582
AC_AttitudeControl: Enable FF by default
2015-05-08 14:14:21 +09:00
Andrew Tridgell
872583f441
AC_AttitudeControl: removed fast_atan
2015-05-05 13:57:16 +10:00
Andrew Tridgell
84ac721340
AC_AttitudeControl: use M_PI_F instead of (float)M_PI
2015-05-05 13:44:19 +10:00
Andrew Tridgell
326b0b33ea
AC_AttitudeControl: revert AP_Math class change
2015-05-05 13:27:04 +10:00
Tom Pittenger
1bca81eaed
AC_AttitudeControl: compiler warnings: apply is_zero(float) or is_equal(float) and float to doubles
2015-05-05 13:26:55 +10:00
Randy Mackay
31edd6a72b
AC_PosControl: add_takeoff_climb_rate method
...
This function simply increments the current altitude target given a
climb rate and dt
2015-05-01 12:56:30 +09:00
Jonathan Challinger
ab2532a609
AC_AttitudeControl: constrain _angle_boost to avoid overflow
2015-04-24 16:30:43 +09:00
Tom Pittenger
84d3069a77
AttControl_Heli: fix compile warning re member init order
2015-04-24 14:15:35 +09:00
Jonathan Challinger
12957867fd
AC_PosControl: fix thr twitch when changing modes
2015-04-18 12:38:44 +09:00
Jonathan Challinger
738b1967ad
AC_PosControl: use LowPassFilterVector2f
2015-04-17 10:47:01 +09:00
Jonathan Challinger
8f667b3d1c
AC_PosControl: fix up comments
2015-04-17 10:46:59 +09:00
Jonathan Challinger
87500d9d70
AC_AttitudeControl: use new lowpass filter
2015-04-17 10:46:45 +09:00
Leonard Hall
c2a6a0a9e2
AC_PosControl: add accel filter parameter
2015-04-16 21:00:45 +09:00
Leonard Hall
a632a57d79
AC_PosControl: accessors to log z-axis vel and accel
2015-04-16 21:00:32 +09:00
Leonard Hall
0aca3c4be6
AC_PosControl: add relax Alt Hold controllers
2015-04-16 21:00:25 +09:00
Leonard Hall
24b8d32b0e
AC_AttitudeControl: add comment
2015-04-16 21:00:22 +09:00
Leonard Hall
7cb3c4ba39
AC_PosControl: add feed forward to Alt Hold
2015-04-16 21:00:20 +09:00
Randy Mackay
a1e6a3ee32
AC_PosControl: minor format fix
2015-04-16 21:00:14 +09:00
Jonathan Challinger
3e0dab7b2d
AC_PosControl: remove accel error filter and set throttle output filter instead
2015-04-16 21:00:07 +09:00
Jonathan Challinger
b7f7624aac
AC_AttitudeControl: add throttle filter cutoff parameter to set_throttle_out functions
2015-04-16 21:00:04 +09:00
Jonathan Challinger
518e798f53
AC_AttitudeControl: rework angle_boost
2015-04-16 20:59:58 +09:00
Jonathan Challinger
7abd02baf2
AC_PosControl: change int32/int16 to float in accel_to_throttle
2015-04-16 20:59:55 +09:00
Jonathan Challinger
d14893fcd5
AC_PosControl: don't limit throttle any more
2015-04-16 20:59:51 +09:00
Jonathan Challinger
f3555d0d43
AC_AttitudeControl: modify throttle interface to specify stabilization
2015-04-16 20:59:45 +09:00
Jonathan Challinger
5c2341009a
AC_AttitudeControl: throttle is a float
2015-04-16 20:59:42 +09:00
Leonard Hall
4d9da2720b
AC_AttitudeControl: add get for angle bf errors
2015-04-16 13:29:52 +09:00
Leonard Hall
48fb487a8c
AC_AttitudeControl: Formatting fix
2015-04-15 22:04:27 +09:00
Randy Mackay
bdfe8bbc54
AC_AttControl_Heli: remove RATE_RP_MAX, RATE_Y_MAX
2015-04-09 20:19:54 +09:00
Leonard Hall
afcd1c6ec3
AC_AttitudeControl: sqrt controller on Stab
2015-04-09 20:19:43 +09:00
Jonathan Challinger
127791127c
AC_PosControl: fix double literals
2015-03-24 06:29:04 -07:00
Leonard Hall
09aa2f8114
AC_AttitudeControl: Fix function discription
2015-03-23 07:40:04 -07:00
Leonard Hall
6b104c0529
AC_AttitudeControl: No Overshoot limit for Stab
...
This maybe done in a more obvious way using a switch rather than just
making the overshoot larger than 180 degrees.
2015-03-23 07:40:02 -07:00
Leonard Hall
9a3f48cc1f
AC_PosControl: ensure throttle output above zero
2015-03-16 14:49:33 +09:00
Randy Mackay
bb74b8dec8
AC_PosControl: fix twitch when entering RTL
...
Also removed slow_cpu flag
Fixed bug in update to _accel_target_jerk_limited.
2015-03-13 20:47:19 +09:00
Randy Mackay
90702e2d79
AC_AttControl: remove example sketch
...
This sketch only tested compiling anyway
2015-03-13 16:40:50 +09:00
Jonathan Challinger
88ec13b10d
AC_PosControl: fix build
2015-03-11 10:00:00 +09:00
Randy Mackay
50d2e98aa4
AC_AttControl: init throttle_hover in constructor
2015-03-10 22:10:36 +09:00
Randy Mackay
965db2c7f7
AC_PosControl: add comments and defines for jerk limits
2015-03-10 22:10:34 +09:00
Jonathan Challinger
4408c1b935
AC_PosControl: 2d jerk constraint in accel_to_lean_angles
2015-03-10 22:10:32 +09:00
Jonathan Challinger
9871b95586
AC_PosControl: fix dt sanity checking
2015-03-10 22:10:30 +09:00
Jonathan Challinger
e2383581cc
AC_AttitudeControl: relax_bf_rate_controller resets rate integrators
2015-03-06 14:02:57 +09:00
Leonard Hall
20de383084
AC_AttControl: accel limiting for angular control only if feed forward enabled
2015-03-06 14:02:52 +09:00
Leonard Hall
7de5bccc93
AC_PosControl: remove THR_HOVER parameter
...
Parameter is set by main code so no need to store to eeprom
2015-03-06 14:02:46 +09:00
Leonard Hall
9866eaded1
AC_PosControl: rename p_alt_pos to p_pos_z
...
Also pid_alt_accel to pid_accel_z
2015-03-06 14:02:44 +09:00
Leonard Hall
349f1aeceb
AC_PosControl: use 2-axis PI controller
2015-03-06 14:02:42 +09:00
Leonard Hall
8d4f0ec80c
AC_PosControl: integrate PID input filter
2015-03-06 14:02:39 +09:00
Randy Mackay
e4d48fdc92
AC_AttControlHeli: separate accel max for roll, pitch
...
renamed _accel_y_max to _accel_yaw_max
2015-03-06 14:02:36 +09:00
Leonard Hall
51455af51a
AC_AttConHeli: integrate PID input filter
2015-03-06 14:02:35 +09:00
Leonard Hall
792b2a2eb3
AC_AttControl: separate accel max for roll, pitch, yaw
...
Also add:
Rate filters
rename rate filter defines
d-term only filter for roll, pitch rate control
accessors to save max accel for roll, pitch, yaw
fix for duplicate ACCEL_Y_MAX param
2015-03-06 14:02:33 +09:00
Leonard Hall
9833c91b2b
AC_AttControl: get_max_rate_step_bf_roll, pitch and yaw
2015-03-06 14:02:30 +09:00
Leonard Hall
f00025e5c9
AC_AttControl: accessor for rate feedforward
2015-03-06 14:02:27 +09:00
Leonard Hall
691fb8947e
AC_AttControl: accessor for rate_bf_targets
2015-03-06 14:02:25 +09:00
Leonard Hall
784a4ce51a
AC_AttControl: increase max angle overshoot to 30deg
2015-03-06 14:02:23 +09:00
Leonard Hall
eb084f7c58
AC_AttControl: bf yaw control uses input filtered PID
2015-03-06 14:02:21 +09:00
Jonathan Challinger
e9bbe062f3
AC_PosControl: modify accel_to_lean_angles to apply filters before yaw rotation
2015-02-24 16:41:03 +09:00
Andrew Tridgell
78dadcb5c6
AC_AttitudeControl: fixed example build
2015-02-09 13:08:34 +11:00
Randy Mackay
186337f18e
AC_PosControl: rename xy_mode enum values
...
Also added a few comments and fixed formatting
2015-02-06 17:00:55 +09:00
Jonathan Challinger
3faca88423
AC_PosControl: allow control of xy rate constraint behavior
2015-02-06 17:00:48 +09:00
Robert Lefebvre
14d76d158a
AC_AttitudeControl: Correct comment.
2015-02-03 14:55:30 +09:00
Randy Mackay
07a0388f25
AC_PosControl: move alt limit to set_alt_target_from_climb_rate
...
The alt limit is instead enforced when the target is set using the
set_alt_target_from_climb_rate function
Also updated comments
2015-01-30 14:13:52 +09:00
Robert Lefebvre
02f3f96310
AC_PosControl: Enable altitude limit checking.
2015-01-30 14:13:45 +09:00
Randy Mackay
d7f7af8c13
AC_AttControl: fix example sketch
2015-01-28 17:15:32 +09:00
Robert Lefebvre
743c5e4fde
AC_AttitudeControl: Remove un-needed #include
2015-01-21 14:36:54 +09:00
Randy Mackay
aeecc46f7b
AC_PosControl: remove unnecessary set of desired_accel
...
The desired_accel is set again 11 lines lower so this line did nothing.
2015-01-14 16:23:26 +09:00
Jonathan Challinger
9ebd0e9960
AC_PosControl: reincarnate dead block of code
2015-01-14 16:20:17 +09:00
Jonathan Challinger
a580cd83e8
AC_PosControl: Fill _vel_desired.z for reporting
2015-01-14 16:08:48 +09:00
Andrew Tridgell
5c4440a9ac
AC_AttitudeControl: updates for new AP_Baro API
2015-01-09 11:50:56 +11:00
Randy Mackay
2a5a133bbf
AC_AttControl: remove deprecated trigger_xy method
2015-01-07 14:03:49 +09:00
Randy Mackay
c36253b9b2
AC_PosControl: add comments
...
No functional change
2014-12-31 14:03:22 +09:00
Jonathan Challinger
557d339cf1
AC_PosControl: remove various unnecessary timing hacks
2014-12-31 14:03:18 +09:00
Jonathan Challinger
d6e455417f
AC_PosControl: change keep_xy_I_terms to a parameter of init_xy_controller
2014-12-31 14:03:13 +09:00
priseborough
12ea1d6e85
AC_AttitudeControl: Scale angle demand noise filter
...
Scales filter frequency using EKF nav gain scaler to take advantage of the reduced nav frequency whichcan tolerate a slower angle response.
This is required to reduce the effect of EKF optical flow noise increase with height.
2014-12-06 18:16:51 +11:00
priseborough
e80b1c67cd
AC_AttitudeControl: Add EKF optical flow noise gain scaler
...
Allows gains to be adjusted to compensate for optical flow noise
2014-12-06 18:16:50 +11:00
priseborough
2dff76394d
AC_PosControl: Add spike and noise filter to demanded angles
...
This has been done to provide a smooth psotion hold when using an optical flow aided EKF which can be noisy.
Signed-off-by: priseborough <p_riseborough@live.com.au>
2014-12-06 18:16:49 +11:00
Jonathan Challinger
bfe71fea82
AC_PosControl: Use blended accelerometer measurement in altitude control
2014-12-05 19:40:10 +09:00
Randy Mackay
d34ea4c124
AC_PosControl: fix to default force_descend param
2014-11-13 18:40:45 -08:00
Jonathan Challinger
e81c1dd5a1
AC_PosControl: add force_descend option to set_alt_target_from_climb_rate
2014-11-13 18:40:38 -08:00
Randy Mackay
98f5a93e10
AC_AttControl: remove unused logging structure
2014-11-08 10:17:32 +09:00
Randy Mackay
ac7ea2a12c
AC_PosControl: use AttControl's sqrt_controller
2014-10-27 15:20:48 +09:00
Jonathan Challinger
7224669399
AC_AttitudeControl: cleanup angle_ef_roll_pitch_rate_ef_yaw_smooth
2014-10-27 15:20:46 +09:00
Jonathan Challinger
779baa006d
AC_PosControl: Use sqrt_controller function
2014-10-27 15:20:44 +09:00
Jonathan Challinger
0c4a489491
AC_AttitudeControl: use sqrt_controller function
2014-10-27 15:20:43 +09:00
Randy Mackay
fc898a00a3
AC_AttControl: add sqrt_controller
...
Original code by Jonathan Challinger
2014-10-27 15:20:40 +09:00
Andrew Tridgell
9a98e63702
AC_AttitudeControl: fixed example build
2014-10-24 12:10:39 +11:00
Randy Mackay
a1cfd03c9b
AC_PosControl: bug fix dt calculation
...
fixes issue in which now could be earlier than _last_update_xy_ms
leading to a large dt value and a sudden lean on takeoff
2014-10-21 11:40:47 +09:00
Jonathan Challinger
4a397a8d67
AC_PosControl: Protect from divide-by-zero in get_stopping_point_xy
2014-10-10 21:17:12 +09:00
Randy Mackay
1754cacf3c
AC_PosControl: remove completed to-do comments
2014-10-04 23:49:24 +09:00
Randy Mackay
f65e81cb07
AC_AttControl: remove some old comments
2014-10-04 23:49:21 +09:00
Randy Mackay
cf3b2be99c
AC_PosControl: 4hz filter on z-axis velocity error
2014-09-22 13:40:01 +09:00
Randy Mackay
665f353416
AC_PosControl: 2hz filter on accel error
...
Replaced hard-coded filter with LowPassFilter class allowing the
filter's to be 2hz on both APM and Pixhawk
2014-09-21 17:53:55 +09:00
Randy Mackay
3e1bd04c94
TradHeli: update AttControl params to match multicopters
2014-09-09 14:41:57 +09:00
Randy Mackay
5a66ff1ef9
AC_AttControl: bug fix for ef target during acro
2014-08-23 22:17:54 +09:00
Randy Mackay
3e0b573dfe
AC_AttControl: remove debug message
2014-08-22 22:58:48 +09:00
Randy Mackay
f6e12bda06
AC_AttControlHeli: integrate div-by-zero check for bf-to-ef conversion
2014-08-22 22:56:18 +09:00
Randy Mackay
c45338f080
AC_AttControl: div-by-zero check for bf-to-ef conversion
2014-08-22 22:56:15 +09:00
Randy Mackay
691a3d8126
AC_AttControlHeli: add passthrough_bf_roll_pitch_rate_yaw
2014-08-22 16:28:57 +09:00
Robert Lefebvre
7d3e22af59
AC_AttitudeControl_Heli: Add use_flybar_passthrough accessor function.
2014-08-22 16:28:45 +09:00
Robert Lefebvre
9b1d9e3cf0
AC_AttitudeControl_Heli: Add passthrough_to_motor_roll_pitch function.
2014-08-22 16:28:42 +09:00
Robert Lefebvre
5c04af6d20
AC_AttitudeControl_Heli: Create Flybar Passthrough flag which will be used for control pass-through.
2014-08-22 16:28:38 +09:00
Randy Mackay
58257e3858
AC_AttControl: set rate D term filter from ins filter
2014-08-14 11:47:35 +09:00
lthall
329118b7c9
Copter: AC_ATT correct yaw error calculation
2014-08-14 11:47:13 +09:00
lthall
90dc9411a5
Copter: ACRO Error calculation fix
2014-08-14 11:47:08 +09:00
Andrew Tridgell
a9153519dc
AC_AttitudeControl: fixed example build
2014-08-13 21:45:38 +10:00
Randy Mackay
e0fc2dd50e
AC_PosControl: remove 20cm on takeoff
2014-08-05 09:11:57 +09:00
Randy Mackay
1362bdc338
AC_PosControl: smooth take-off with accel PID's I term
...
This avoids an instantaneous jump in throttle during take-off by loading
the accel PID's I term with the expected change in throttle level
2014-08-04 21:04:09 +09:00
Randy Mackay
e550c1e9a3
AC_PosControl: add set_alt_target_to_current_alt method
2014-08-04 16:54:04 +09:00
Randy Mackay
424cb1aeca
AC_AttControl: fix example sketch
2014-07-29 12:00:33 +09:00
Andrew Tridgell
6df2890fd8
AC_AttitudeControl: fixed example build
2014-07-25 17:52:53 +10:00
Randy Mackay
c2f8571f37
AC_AttControl: FF and accel limiting off by default
...
Also adjust parameter ranges used by GCSs
2014-07-17 16:22:32 +09:00
Randy Mackay
eebd32f306
AC_AttControl: remove duplicate rate_ef_desired to resolve compiler warning
2014-07-16 21:50:31 +09:00
lthall
fb55658c91
Copter: Acro use same error limit in all three axis
2014-07-16 17:46:13 +09:00
lthall
2889f5abc4
AC_AttControl: Fix feedforward behavior
2014-07-16 17:46:06 +09:00
Randy Mackay
581838b271
AC_AttControl: initialise _acro_angle_switch
...
Resolves a compiler warning
2014-07-16 15:11:12 +09:00
Randy Mackay
83a84c7b90
AC_AttControl: add empty virtual destructor
...
This resolves pixhawk bricking and reduces one compiler warning
2014-07-16 14:56:52 +09:00
Jonathan Challinger
6e66cf43cb
AC_AttitudeControl: Use bias-corrected angular rates instead of raw gyro measurements
2014-07-16 14:40:56 +09:00
Randy Mackay
70568225a6
AC_PosControl: init members to resolve compiler warnings
2014-07-16 14:38:40 +09:00
Randy Mackay
9233bbab14
AC_PosControl: cast fabs to float to resolve compiler warnings
2014-07-16 14:38:38 +09:00
Randy Mackay
76507a9e67
AC_AttControlHeli: remove hal declaration to clear compiler warning
2014-07-16 14:38:32 +09:00
Randy Mackay
5128991a84
AC_AttControlHeli: cast fabs to float to resolve compiler warning
2014-07-16 14:38:29 +09:00
Randy Mackay
0f7178e447
AC_AttControl: cast fabs to float to resolve compiler warning
2014-07-16 14:38:20 +09:00
Jonathan Challinger
762bb3e6e8
AC_AttitudeControl: Limit _pos_target.z to below alt_max before computing error
2014-07-13 21:14:34 +09:00
Jonathan Challinger
5f66027ba3
AC_AttitudeControl: Fixup some minor mistakes in AC_PosControl
2014-07-13 17:17:31 +09:00
Robert Lefebvre
a7f6a91827
AC_AttitudeControl_Heli: Remove ToDo. Rate controllers should always run even if throttle is zero.
2014-07-13 17:11:20 +09:00
Randy Mackay
971411e0db
AC_AttControl: fixed typo in parameter description
2014-07-13 10:31:11 +09:00
Randy Mackay
5f623ac859
AC_AttControl: re-enable rate feedforward by default
...
Roll and Pitch rate controllers became sluggish without feed-forward
enabled.
2014-07-11 15:31:00 +09:00
Andrew Tridgell
8af876fe8a
AC_AttitudeControl: fixed build
...
includes are case sensitive on the build server
2014-07-09 10:19:17 +10:00
Robert Lefebvre
26be7aed97
AC_AttControl_Heli: Add LPF filter to Rate Feedforward terms
2014-07-08 20:18:13 +09:00
Randy Mackay
82ed70b25e
AC_PosControl: add xyz velocity controller
...
Velocity controller interpretsthe velocity requests as
desired velocities (i.e. feed forward). These are then used to update
the target position and also added to the target velocity.
Also renamed the set_desired_velocity() function to
set_desired_velocity_xy() to make clear only lat and lon axis are
updated.
2014-07-06 17:01:02 +09:00