Commit Graph

4968 Commits

Author SHA1 Message Date
Randy Mackay
a43229de0f Copter: fix z-axis accel parameter description 2016-12-19 17:01:06 +09:00
priseborough
38ad778ff1 make.inc: Add EKF3 and remove EKF1 library from make.inc files 2016-12-19 08:07:10 +11:00
Andrew Tridgell
c3b9dbf5c8 ArduCopter: Add EKF3 and remove EKF1 2016-12-19 08:07:09 +11:00
Randy Mackay
c846cc249d Copter: fix heli pos-hold run-up-complete issue 2016-12-15 19:00:21 +09:00
Randy Mackay
a2474667a8 Copter: minor formatting fix
no functional change
2016-12-14 13:22:24 +09:00
Randy Mackay
5f60961866 Copter: fix suppressing comment for case fall through
eclipse stops complaining if no-break is used in place of fall-through
2016-12-14 13:22:04 +09:00
Randy Mackay
0ab0658849 Copter: 3.4.3. release notes get compass cal fix 2016-12-09 11:39:05 +09:00
Randy Mackay
3d3fb6e74b Copter: fix version in release notes 2016-12-09 08:32:12 +09:00
Randy Mackay
3c993a76e2 Copter: 3.4.3 release notes 2016-12-09 07:57:43 +09:00
Randy Mackay
c1d1ac5c6f Copter: pass HIL_GPS to gps driver 2016-12-08 15:52:26 +09:00
Pierre Kancir
5900653b7f Copter: Commands_logic fix comparing floating point with == 2016-12-06 09:31:21 -08:00
Pierre Kancir
8d4bad0742 Copter: Commands_logic fix implicit cast to double 2016-12-06 09:31:21 -08:00
Pierre Kancir
f2ea388a69 Copter: control_auto remove misplaced parenthesis 2016-12-05 10:59:45 -08:00
Pierre Kancir
3fc17a5ed5 Copter: avoid must be initialized after fence as it use it 2016-12-05 10:59:45 -08:00
Peter Barker
556eb88fe5 Copter: fix compile when precland is not selected
Fixes #5327
2016-12-05 20:03:00 +09:00
Michael du Breuil
8c077a357c Copter: add compass cal capability bit 2016-12-04 19:17:01 -08:00
Peter Barker
4aab4f72b6 Copter: move to releasing payload if we are landed 2016-12-02 13:25:34 +11:00
Peter Barker
289aba4350 Copter: support for NAV_CMD_PLACE 2016-12-02 12:52:53 +11:00
Randy Mackay
128b4562a5 Copter: 3.4.3-rc1 release notes 2016-12-01 19:40:21 +09:00
Randy Mackay
9426b0b366 Copter: set land_complete to false during auto takeoff
This resolves an issue in very high powered copters that could fly a mission while "landed" which could lead to a crash during the final stage of RTL
2016-12-01 12:10:32 +09:00
Randy Mackay
5135a11fbc Copter: protect against arming while already armed
Previously it was possible to arm the vehicle (from the GCS) even thought the vehicle was already armed which would lead to the motors stopping for 2 seconds
2016-12-01 10:24:53 +09:00
Randy Mackay
74c9c4aa9d Copter: add beacon data flash logging
Added to Copter vehicle because currently only used by Copter
2016-11-30 17:56:59 +09:00
Randy Mackay
f2a6a4f4f9 Copter: update beacon updates to 400hz 2016-11-30 17:56:58 +09:00
priseborough
7a6e30e7b5 Copter: remove call to EKF1 logging 2016-11-30 17:56:57 +09:00
priseborough
3847975844 Copter: give the AHRS access to the range beacon sensor 2016-11-30 17:56:56 +09:00
Randy Mackay
21c7ea1df7 Copter: integrate AP_Beacon 2016-11-30 17:56:55 +09:00
Randy Mackay
8ab5124489 Copter: add AP_Beacon to build 2016-11-30 17:56:54 +09:00
Peter Barker
7069730d5f Copter: do not reset LOG_BITMASK when no CardInserted
This really just confuses everyone
2016-11-29 15:14:09 -08:00
Peter Barker
f9802204df Copter: inform dataflash of vehicle arm state 2016-11-28 09:42:09 -08:00
Andrew Tridgell
bcea3ac8d4 Copter: handle rangefinder glitches in alt tracking
this handles glitches from the rangefinder when tracking the
ground. It requires 3 readings in a row to settle on a new target
altitude

thanks to discussions with Leonard and Randy
2016-11-28 17:36:01 +11:00
Randy Mackay
115bc44d3f Copter: log proximity sensors closest object 2016-11-27 15:05:47 +09:00
Randy Mackay
7485de3498 Copter: add send_proximity to send distances to GCS 2016-11-27 15:05:46 +09:00
Randy Mackay
218c8b2d16 Copter: proximity pre-arm check displays closet object 2016-11-27 15:05:44 +09:00
murata
f7273d0e93 Copter: Change from printf statement to print, println statement. 2016-11-26 00:02:11 +00:00
Andrew Tridgell
2ed32a3ac0 Copter: added raw RFND logging 2016-11-21 10:30:12 +11:00
Peter Barker
e72f5a6240 ArduCopter: enable/disable precision loiter on a switch
A switch MUST be assigned for precision loiter to be enabled
2016-11-18 09:41:56 +09:00
Peter Barker
2fd6be8ccb ArduCopter: neaten reading of aux switches 2016-11-18 09:41:56 +09:00
Peter Barker
9e4628af58 Copter: precision loiter 2016-11-18 09:41:56 +09:00
Peter Barker
b9808662b8 Copter: remove dead code 2016-11-18 09:41:56 +09:00
Peter Barker
469f0f0bf0 Copter: remove incorrect comment from PRECISION_LANDING block 2016-11-18 09:41:56 +09:00
Randy Mackay
7f6ecfca3d Copter: 3.4.2 release notes 2016-11-16 09:37:21 +09:00
Francisco Ferreira
84436ff5ae Copter: sipport MAV_CMD_ACCELCAL_VEHICLE_POS 2016-11-15 11:42:54 -08:00
Andrew Tridgell
df3e434607 Copter: use handle_common_message() 2016-11-09 17:08:09 +11:00
Florent Martel
8761ecca6c Copter: move AP_Frsky_Telem for waf to ardupilotwaf 2016-11-08 07:42:39 +11:00
Randy Mackay
ae8aea482f Copter: 3.4.2-rc2 release notes 2016-11-07 13:37:13 +09:00
Randy Mackay
69fd0939d9 Copter: 3.4.2-rc1 release notes 2016-11-07 13:37:13 +09:00
Randy Mackay
b87ad8378b Copter: ACRO_Y_EXPO default to 0
This value affects yaw in all flight modes.  Leonard is planning to change the name to make that more clear.
2016-11-07 10:34:32 +09:00
Randy Mackay
93b88a68a0 Copter: only log proximity if sensor is enabled 2016-11-07 09:36:53 +09:00
floaledm
53fcbcb6c3 Copter: send ahrs groundspeed estimate instead of GPS groundspeed in VFR_HUD message 2016-11-07 09:14:28 +11:00
Peter Barker
236b8ab6b7 Copter: make EPM a subclass of AP_Gripper_Backend 2016-11-05 10:20:39 +09:00
Peter Barker
920868145c Copter: support for AP_Gripper 2016-11-05 10:20:33 +09:00
murata
1df8acf5cd Copter: remove intermediate variable from throw mode 2016-11-03 10:37:27 +09:00
Randy Mackay
bf0e7fb3a9 Copter: add compass health to arming check 2016-11-01 18:00:18 +09:00
Randy Mackay
63771707fb Copter: 3.4.1 release notes 2016-11-01 11:30:22 +09:00
Randy Mackay
594bca2ccf Copter: 3.4 release notes 2016-10-31 12:18:58 +09:00
floaledm
aa8cae82b0 Copter: redo of commit b24d850695 2016-10-30 11:46:39 -02:00
Peter Barker
d877a00825 Copter: call run rather than enable for sprayer 2016-10-29 15:02:54 +09:00
Peter Barker
d2b7749af3 Copter: AP_Stats flighttime 2016-10-29 14:53:25 +09:00
Peter Barker
1bb6350a67 Copter: periodically call stats update 2016-10-29 14:53:25 +09:00
Peter Barker
df07cb525a Copter: use AP_Stats to store statistics about vehicle 2016-10-29 14:53:25 +09:00
Randy Mackay
be15fe4100 Copter: version to 3.5-dev 2016-10-29 14:33:44 +09:00
murata
965a6a5719 Copter: To nullptr from NULL. 2016-10-28 10:53:31 -07:00
Andrew Tridgell
1b46a71596 Copter: also update sensor status before mavlink send
this removes the 1 second lag in updates when using the one second
loop
2016-10-28 10:05:40 +11:00
floaledm
34718b130a Copter: update sensor status error flags independently of sending a sys_status message
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
2016-10-28 10:03:38 +11:00
Andrew Tridgell
e8b9c815fc Copter: updates for EKF API changes 2016-10-27 17:09:06 +11:00
priseborough
209e364190 Copter: Add body position offset to optical flow interface 2016-10-27 14:54:42 +11:00
Michael du Breuil
790ddeb04e Copter: Use the compass calibrator autoreboot behaviour
(fixes a chance of not saving the second compass)
2016-10-27 14:04:33 +11:00
Leonard Hall
0523570c5f Copter: reduce dead zone for roll, pitch and yaw input 2016-10-26 21:00:32 +09:00
Leonard Hall
53486a5725 Copter: increase Autotune test time out for large copters 2016-10-26 21:00:23 +09:00
Leonard Hall
0a6714f4ae Copter: rename variable ROLL_PITCH_YAW_INPUT_MAX
No functional change
2016-10-26 20:59:43 +09:00
Leonard Hall
2698f14d39 Copter: apply yaw expo to all modes 2016-10-26 20:59:33 +09:00
Randy Mackay
bc0965bb08 Copter: 3.4-rc7 release notes 2016-10-25 19:34:58 +09:00
Mathieu OTHACEHE
152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Francisco Ferreira
1e2e24eeac Copter: fix wrong range in Throw mode
Fixes #5038
2016-10-23 11:56:57 +09:00
Randy Mackay
1f160f2903 Copter: minor comment update
No functional change
2016-10-22 13:31:16 +09:00
Andrew Tridgell
9205416695 Copter: setup default safety mask based on motor mask 2016-10-21 11:53:59 +11:00
Randy Mackay
83b8208b8b Copter: fix PRX_ parameters duplicate underscore in param name 2016-10-19 17:24:43 +09:00
Andrew Tridgell
c01a7718c1 Copter: fixed startup order of setting mavlink system ID 2016-10-17 09:19:08 +11:00
Andrew Tridgell
57830784e2 Copter: use handle_rc_bind 2016-10-15 21:42:38 +11:00
Andrew Tridgell
5a9276a5c4 Copter: added SYSID_ENFORCE parameter
allows enforcement of SYSID_MYGCS
2016-10-15 17:14:19 +11:00
Randy Mackay
cb977bca6f Copter: 3.4-rc6 release notes 2016-10-15 12:27:04 +09:00
Randy Mackay
5894a54a16 Copter: althold uses current alt target if active
Previously we always reset the altitude target to the current altitude but this causes a jump if the vehicle is already in an alt-hold flight mode but has an altitude error
2016-10-15 11:29:10 +09:00
Leonard Hall
fec24437f2 Copter: load accel throttle I term from attitude controller input
Previously we loaded up the I term from the pilot's input but a more reliable method is to get what was passed into the attitude controller.  In particular the addition of the acro-thr-mid parameter means the pilot's input must be interpreted differently for different flight modes.
2016-10-15 11:27:53 +09:00
Randy Mackay
a124001b8b Copter: get_pilot_desired_throttle gets thr_mid argument default 2016-10-15 11:27:53 +09:00
Leonard Hall
5c47f3f9e5 Copter: add acro throttle and yaw expo and smoother manual pilot throttle 2016-10-15 11:27:53 +09:00
Randy Mackay
0aab175051 Copter: move proximity to g2 2016-10-14 14:02:29 +09:00
Randy Mackay
fa36b563bc Copter: add advanced failsafe enable to APM_Config
No functional change
2016-10-14 14:00:59 +09:00
murata
f705bd0d83 Copter: reduce intermediate storage of arming_check results 2016-10-14 11:39:18 +09:00
Jonathan Challinger
7cb9ad6e2b Copter: descend normally from 35cm 2016-10-14 10:46:11 +09:00
Jonathan Challinger
f2ef8eec8c Copter: use velocity output from AC_PrecLand 2016-10-14 10:46:08 +09:00
Randy Mackay
ccc99c772f Copter: remove union from aux_con for switch state 2016-10-14 10:31:05 +09:00
murata
b23823a934 Copter: delete unused variable from aux switch structure 2016-10-14 10:30:41 +09:00
Andrew Tridgell
ebbcabcb5f Copter: fixed comment 2016-10-14 11:40:09 +11:00
Randy Mackay
89c660eab5 Copter: add pre-arm check for proximity sensor 2016-10-13 20:21:07 +09:00
Randy Mackay
1665f4d416 Copter: report altitude and position control of new modes in sys-status message 2016-10-13 20:21:07 +09:00
Randy Mackay
4afa49eebe Copter: report proximity health in system-status 2016-10-13 20:21:07 +09:00
Randy Mackay
a07ecfe2b3 Copter: log proximity sensor at 10hz
This is current in the Copter vehicle code but we can move to the dataflash library when other vehicles start using this type of sensor.  Until then adding it to common will just increase the dependencies unnecessarily for other vehicles.
2016-10-13 20:21:07 +09:00
Randy Mackay
bba7369e9a Copter: pass AP_Proximity to AC_Avoid 2016-10-13 20:21:07 +09:00
Randy Mackay
fcc2a1b378 Copter: integrate AP_Proximity into main vehicle 2016-10-13 20:21:07 +09:00
Randy Mackay
5f749a0597 Copter: add AP_Proximity to build 2016-10-13 20:21:07 +09:00
Andrew Tridgell
652b6b7564 Copter: deprecate RC_CHANNELS_RAW 2016-10-13 21:24:02 +11:00
Randy Mackay
26c3295042 Copter: ignore first ekf core switch
The ekf core is initialised to -1 but after initialisation changes to zero.  Ignore this first change.
2016-10-13 15:20:16 +09:00
murata
f3a035694a Copter: fix ekf check to always call mode_requires_gps 2016-10-12 10:16:55 +09:00
Michael du Breuil
ea45e5e6f1 Copter: Support GPS_RTCM_DATA 2016-10-11 11:00:36 +11:00
Randy Mackay
263f685683 Copter: ekf failsafe can trigger in LAND
Thanks to John Ingersoll for the report and detailed fix
Resolves issue #4827
2016-10-10 17:36:36 +09:00
Randy Mackay
d74ae535d1 Copter: log EKF lane switch 2016-10-10 16:40:08 +09:00
Randy Mackay
35864c6226 Copter: move check_ekf_reset to ekf_check.cpp
No functional change
2016-10-10 16:40:08 +09:00
murata
f135ca5ae7 Copter: reduce repeated string constants 2016-10-10 12:17:12 +09:00
Randy Mackay
3b6e56d1a0 Copter: minor formatting fixes
No functional change
2016-10-10 12:11:14 +09:00
murata
61fa73f25d Copter: remove return after the Switch statement 2016-10-10 12:07:24 +09:00
Randy Mackay
337461c16c Copter: pre-arm check of GPS configuration 2016-10-10 10:52:54 +09:00
murata
57c61ace62 Copter: To remove a break after the return statement. 2016-10-08 13:55:18 -03:00
murata
7148cc6239 Copter: Return value is changed to Enum Value. 2016-10-05 08:25:15 -03:00
murata
60137e0f0b Copter: replace if statement with switch statement 2016-10-05 16:32:57 +09:00
Jonathan Challinger
a393bd26d7 Copter: add stick gesture to begin compass calibration 2016-10-05 16:29:02 +09:00
Lucas De Marchi
b24d850695 ArduCopter: Fix use of logical op instead of bitwise op
../../ArduCopter/GCS_Mavlink.cpp: In member function 'void Copter::send_extended_status1(mavlink_channel_t)':
../../ArduCopter/GCS_Mavlink.cpp:281:37: error: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Werror=parentheses]
     uint32_t sensors_error_flags = !control_sensors_health & control_sensors_enabled & control_sensors_present;
                                     ^
compilation terminated due to -Wfatal-errors.
cc1plus: all warnings being treated as errors

Thanks to Ralph Campbell <ralphcampbell1@gmail.com> for the bug report.
2016-09-29 11:36:23 -03:00
Pierre Kancir
6f79a8c37c Arducopter: simply invalid cmd msg 2016-09-27 07:45:48 -07:00
Pierre Kancir
94e42e870e ArduCopter: uniformize verify_command
Add better gcs message,
Add all handle message,
Reformate comments,

Fix do_roi comment
2016-09-27 07:45:48 -07:00
Tom Pittenger
748beb094d Copter: log to dataflash statustext messages from my_gcs 2016-09-26 00:13:30 -07:00
Randy Mackay
7091daa1cf Copter: remove out of date comment regarding autotune
no functional change
2016-09-23 20:48:03 +09:00
Peter Barker
b81074d83a Copter: simplify auxsw duplicates check 2016-09-23 18:12:19 +09:00
floaledm
5910c94b65 Copter: change sensor health check to prevent false positive 2016-09-22 13:56:49 -05:00
John deVere
d89b82b69f Copter: fixed parameter description typos 2016-09-14 14:05:47 -07:00
Randy Mackay
9b8b45b218 Copter: 3.4-rc5 release notes 2016-09-14 13:04:39 +09:00
Randy Mackay
9b1b18b15b Copter: add sprayer to aux switch options 2016-09-13 17:34:15 +09:00
Randy Mackay
f37c17bd80 Copter: include spray in build by default 2016-09-13 15:16:13 +09:00
Randy Mackay
a8f0291711 Copter: parameter conversion only for matrix multicopters
Single, Coax and Tri copter rate parameter conversions were incorrect
2016-09-13 09:44:38 +09:00
Andrew Tridgell
d0dd10aeea Copter: added DEV_OPTIONS parameter
this is for little used options to allow standard firmware builds to
enable those options for development purposes

First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Randy Mackay
f22f10460a Copter: 3.4-rc4 release notes 2016-09-06 11:18:07 +09:00
floaledm
85a3fda879 Copter: removed reliance on home_distance and home_bearing which are only in copter 2016-09-06 11:42:33 +10:00
Leonard Hall
1f2d17e8e7 Copter: increase chance that parachute will deploy
Previously a single moment where the vehicle was within 30deg of the target could cause the parachute release counter to reset to zero.  This change makes the parachute release if it is spending at least half it's time with more than a 30degree angle error.
2016-09-06 09:43:31 +09:00
Michael du Breuil
bec4bfa2ba Copter: Return RESULT_FAILED for GET_CMD_HOME if home is unset 2016-09-03 16:54:16 +09:00
Randy Mackay
4832ba4bf0 Copter: call attitude control parameter check 2016-09-02 09:27:17 +09:00
Randy Mackay
42cca17df4 Copter: update 3.4-rc3 release notes 2016-09-01 11:45:46 +09:00
Randy Mackay
f6f3718e80 Copter: 3.4-rc3 release notes 2016-08-31 15:01:23 +09:00
Randy Mackay
a8a31b1c24 Copter: fix health reporting to GCS for optical flow and precision landing
Includes slight restructuring to logic for other sensors but these should not have any functional effect
2016-08-31 13:59:16 +09:00
Randy Mackay
cba480d02b Copter: add auto calibration to ESC_CAL parameter description
No functional change
2016-08-31 11:53:53 +09:00
Randy Mackay
e17c8ac851 Copter: remove non-working reset-to-armed-yaw
Arguably we should make this work, but until that happens we should not present the option on the auxiliary switches
2016-08-29 16:34:24 +09:00
Randy Mackay
eded2dee23 Copter: TELEM_DELAY parameter range to 30sec
No functional change
2016-08-29 15:29:05 +09:00
Andrew Tridgell
d186e1c648 Copter: improve the reliability of ESC calibration with OneShot ESCs
run at higher rate and make sure we're always giving output
2016-08-29 15:52:21 +10:00
khancyr
733786830d Copter: config.h fix typo 2016-08-26 14:28:35 +09:00
khancyr
1a1c749501 Copter: fix typo in parameters.cpp 2016-08-26 14:28:35 +09:00
Andrew Tridgell
f18e0dadc9 Copter: added optional AdvancedFailsafe for copter and heli 2016-08-25 14:14:18 +10:00
Grant Morphett
28552d5cc9 Copter: Supports COMMAND_INT in the code so added it to capabilites. 2016-08-25 12:56:32 +10:00
Andrew Tridgell
ea7e62df17 Copter: use a constant string for frsky_telemetry init 2016-08-25 11:00:31 +10:00
floaledm
893614897e Copter: moved MAV_TYPE to Copter.h 2016-08-25 10:16:20 +10:00
Andrew Tridgell
96de005591 Copter: moved MAV_TYPE define to defines.h 2016-08-25 10:16:20 +10:00
Andrew Tridgell
a14ff8ac77 Copter: fixes for Frsky_Telem API changes 2016-08-25 10:16:20 +10:00
Andrew Tridgell
0bcc9c4cb0 Copter: fix for AP_FrSky_Telem API change 2016-08-25 10:16:19 +10:00
floaledm
baa3357b21 Copter: changed init for SPort passthrough protocol compatibility 2016-08-25 10:16:18 +10:00