Commit Graph

6574 Commits

Author SHA1 Message Date
Michael Day dca99a9643 GCS_MAVLink: code generation from XML for MAV_CMD_CONTINUE_AND_CHANGE_ALT. 2014-11-25 10:43:15 +11:00
Andrew Tridgell d5ced15acf GCS_MAVLink: include units in CONTINUE_AND_CHANGE_ALT 2014-11-25 10:43:14 +11:00
Michael Day 958d8ffacc GCS_Mavlink: New message def: MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT 2014-11-25 08:49:13 +11:00
Kirill A. Kornilov 33e4f44434 RC_Channel: added set_radio_trimmed()
take into account trim value in set_radio()
2014-11-25 08:19:27 +11:00
Andrew Tridgell 8d54368650 AP_Math: fixed build warning 2014-11-25 08:17:15 +11:00
Andrew Tridgell 09547c40cb DataFlash: added staticmode to EKF4 message
useful when diagnosing logs
2014-11-22 18:27:51 +11:00
Andrew Tridgell 46f601d703 AP_NavEKF: added getStaticMode() function 2014-11-22 18:27:51 +11:00
Andrew Tridgell 8acfbb2ee0 AP_NavEKF: add another health check in the EKF
if SV, SP and SH are all off then the most likely cause is divergence
of the EKF. This was done based on a flight log with bad gyro cal
2014-11-22 18:27:51 +11:00
Andrew Tridgell f84f432ecf AP_InertialSensor: allow gyro calibration to take up to 30 seconds
this gives time for the user time to get their battery hatches on and
hold the model steady. 5 seconds was just far too short
2014-11-22 18:27:51 +11:00
Randy Mackay 20f3f19285 Compass: add new rotation to ORIENT param description 2014-11-22 14:13:25 +09:00
Randy Mackay 503d14428d AP_Math: add new rotation to example rotation sketch 2014-11-22 14:10:00 +09:00
Randy Mackay 3d2c9910b3 AP_Math: add yaw 293, pitch 68, roll 180 rotation 2014-11-22 14:09:16 +09:00
priseborough d57c99f1cc DataFlash: Fix bug in logging of EKF IMU1 Z accel bias 2014-11-18 13:39:42 +11:00
Andrew Tridgell 78db698108 AP_Mount: allow a MOUNT_CONTROL message to reset RC targetting
fixes issue #1617
2014-11-18 13:35:11 +11:00
Randy Mackay 73f3b50e2f RC_Channel: make get_control_mid const 2014-11-17 18:16:12 -08:00
Jonathan Challinger 9375fc8947 RC_Channel: add get_control_mid function 2014-11-17 18:16:09 -08:00
Jonathan Challinger 4d7988b302 RC_Channel: replace long with int32_t 2014-11-17 18:16:08 -08:00
Andrew Tridgell 14467b75a1 AP_Mount: use norm_input_dz()
this makes rc targeting much easier without drift
2014-11-18 12:44:29 +11:00
Andrew Tridgell 6b0c15b70f RC_Channel: added norm_input_dz()
normalised input, taking into account dead zone
2014-11-18 12:44:05 +11:00
Andrew Tridgell ad0e6dccbb GCS_MAVLink: re-generate headers 2014-11-18 11:20:44 +11:00
Andrew Tridgell de294277e9 GCS_MAVLink: cope with new mavlink repo change in mavlink_system_t 2014-11-18 11:20:28 +11:00
Andrew Tridgell abba6395ad AP_TECS: fixed spelling error 2014-11-18 11:12:57 +11:00
Randy Mackay 8ef2948f27 GCS_MAVLink: generate update to version 2014-11-17 15:59:36 -08:00
Randy Mackay e46be909a4 GCS_MAVLink: generate after mount_status msg change 2014-11-17 15:59:33 -08:00
Arthur Benemann 9b5684d007 GCS_MAVLink: add MOUNT_STATUS to message enum 2014-11-17 15:59:28 -08:00
Arthur Benemann f7f9bedc38 AP_Mount: update the status_msg() method to match the new definition 2014-11-17 15:59:23 -08:00
Arthur Benemann c5b4121fc7 GCS_MAVLink: MOUNT_STATUS to always be reporting the angle of the gimbal
This is useful for GCS trying to plot the camera footprint.
2014-11-17 15:59:21 -08:00
Jonathan Challinger 055d3bee1f GCS_MAVLink: run generate.sh 2014-11-17 14:38:53 -08:00
Jonathan Challinger a4f994e8f0 GCS_MAVLink: update MAV_FRAME enum 2014-11-17 14:38:51 -08:00
Jonathan Challinger 2cc65dffe0 AC_WPNav: add set_spline_dest_and_vel function 2014-11-17 14:38:46 -08:00
Andrew Tridgell 809ff15b43 AP_GPS: make NMEA driver a bit easier to read
thanks to crashpilot100
2014-11-16 14:12:14 +11:00
Andrew Tridgell b81b9e1bb8 AP_GPS: prevent bad NMEA strings from causing overruns in parser
fixes issue #961

thanks to crashpilot100 for spotting this!
2014-11-16 14:08:20 +11:00
Andrew Tridgell 7497b4dfb1 HAL_Linux: fixed Replay with new AP_InertialSensor library 2014-11-16 12:30:50 +11:00
Andrew Tridgell 7c288e020b AP_InertialSensor: fixed detection of dead IMU
if a PX4 sensor does not give new data we need to avoid calling
_rotate_and_offset_*() to avoid marking it as healthy. Otherwise if
the MPU6k dies we won't switch to the LSM303D automatically
2014-11-16 12:30:33 +11:00
Andrew Tridgell 22237f2530 HAL_SITL: fixed handling of SIM_FLOAT_EXCEPT in main thread 2014-11-16 11:05:55 +11:00
Randy Mackay d9d238cc3c Relay: param descr match labels for Pixhawk
Renamed Pixhawk FMU AUX1 to Pixhawk AUXOUT1 to match labels on case to
make it easier for users to know what value to choose
2014-11-15 12:49:02 -08:00
Randy Mackay 0d3e1131a7 Relay: Pixhawk AUXOUT2 enabled by default 2014-11-15 12:45:12 -08:00
bugobliterator 9d39c0407e HAL_Linux: added ToneAlarmDriver.h 2014-11-15 21:25:55 +11:00
bugobliterator 485abbac3a AP_Notify: cleanup use of bool from toneAlarm_init() 2014-11-15 16:59:28 +11:00
bugobliterator 329c1f5190 HAL_Linux:create ToneAlarmDriver as a separate class
ToneAlarm is now declared as a separate class instance of which is added as a private member of LinuxUtil
Some minor fixes in this patch include changing return type of tonealarm_init() to bool and use dprintf
2014-11-15 16:59:06 +11:00
bugobliterator ad460659ad AP_HAL: make toneAlarm_init() return bool 2014-11-15 16:59:06 +11:00
bugobliterator f058131140 HAL_Linux Scheduler: reduce the delay inside tonealarm thread
Since the tonealarm is now passthrough the delay inside the thread needs to be reduced for precise tune generation
2014-11-15 16:59:06 +11:00
bugobliterator 3b94cb3072 HAL_Linux: make tonealarm generation a passthrough operation
get rid of all delays and while loops(that may turn into infinite loop)
2014-11-15 16:59:06 +11:00
bugobliterator e254b406d0 HAL_Linux: make rtttl tune and tune repeat flag list static members
instead of initialising them inside constructor
2014-11-15 16:59:06 +11:00
Andrew Tridgell c8c822422a HAL_Linux: give error msg on failure to start toneAlarm 2014-11-15 16:58:58 +11:00
Andrew Tridgell 7718be81cb AP_Notify: give error msgs on failure to start 2014-11-15 16:58:40 +11:00
Andrew Tridgell 682cf02770 GCS_MAVLink: regenerate after merge 2014-11-14 15:25:06 +11:00
Andrew Tridgell 0dba1b370a GCS_MAVLINK: merge with upstream XML 2014-11-14 15:24:34 +11:00
Andrew Tridgell d3b087d2c1 AP_GPS: fixed build on non-PX4 platforms 2014-11-14 14:48:42 +11:00
Andrew Tridgell e69582aa1c AP_GPS: added PX4EXPERIMENTAL to GPS type drop down 2014-11-14 14:39:46 +11:00
Holger Steinhaus abad58874c AP_GPS: enable GNSS modules handled by PX4 firmware via GPS_TYPE
GNSS modules handled by PX4 drivers are not auto-detectable, some are not even
connected to a UART port. The activation is therefore controlled by GPS_TYPE
only. Baud rate and port settings (if applicable) have to be handled by the PX4
firmware.
2014-11-14 14:36:10 +11:00
Holger Steinhaus 442aafbd1e AP_GPS: add proxy driver for GNSS modules handled by PX4 firmware 2014-11-14 14:36:10 +11:00
John Williams 57d2fc1dd5 HAL_Linux: RCInput support for Zynq 2014-11-14 14:10:35 +11:00
Jason Short 7ee5b58535 AP_Mount: Axis mask speedup
Using a simple bit mask to avoid calculating an unneeded ATAN2() for AVR users.
2014-11-14 13:51:16 +11:00
Matthias Badaire 1d3a49e466 AP_HAL_PX4 : make UARTDriver capable to be called from different threads.
The modification allows the read and write functions to be called by any thread but the calling thread must be the last one that called the begin() function.
2014-11-14 13:51:16 +11:00
Andrew Tridgell 154bf51279 HAL_PX4: minor tidy up of if statement 2014-11-14 13:51:16 +11:00
Holger Steinhaus 9e9c62d245 HAL_PX4: work-around for periodic enable_ch() calls 2014-11-14 13:51:16 +11:00
Holger Steinhaus e5549c90a1 HAL_PX4: do not overwrite disabled channels with zeros
Fixes #1321
2014-11-14 13:51:16 +11:00
Randy Mackay d34ea4c124 AC_PosControl: fix to default force_descend param 2014-11-13 18:40:45 -08:00
Jonathan Challinger e81c1dd5a1 AC_PosControl: add force_descend option to set_alt_target_from_climb_rate 2014-11-13 18:40:38 -08:00
Andrew Tridgell 2270a904ce RC_Channel: make flaperson range from -4500 to 4500 2014-11-14 11:23:52 +11:00
Jonathan Challinger cc955b738b AP_NavEKF: Clean up flight detector logic 2014-11-14 10:34:49 +11:00
priseborough 5359da9c68 AP_NavEKF : Improved Magnetometer Error Handling
(Plane Only) If the yaw and GPS heading disagree by more than 45 degrees on takeoff, then the magnetometer is declared as failed. The heading is then reset based on the difference between GPS ground track and stgate velocity vector.
Magnetometer fusion uses corrected data and bias states are initialised to zero. This allows the compass to be switched in flight.
For persistent compass errors that trigger a timeout, the compass is not permanently failed, however for non-forward fly vehicles the compass weighting is reduced.
2014-11-14 10:34:48 +11:00
Staroselskii Georgii a55db1c25d AP_HAL_Linux: fixed LinuxGPIO_RPI::read() 2014-11-14 10:28:34 +11:00
Mikhail Avkhimenia 49d3035ee5 HAL_Linux: fix types, remove printfs in GPIO_RPI 2014-11-14 10:28:34 +11:00
Mikhail Avkhimenia 6f993fe64a HAL_Linux: add prototype RCInput code for Navio 2014-11-14 10:28:34 +11:00
Staroselskii Georgii ef420a2544 AP_HAL_Linux: changed SPI mode for MPU9250 2014-11-14 10:28:34 +11:00
Staroselskii Georgii bf860ee41f AP_HAL_Linux: Ublox SPI stub 2014-11-14 10:28:34 +11:00
Víctor Mayoral Vilches ce4c4c43dc AP_HAL_Linux: Scheduler reboot fix
exit from the autpilot when reboot is commanded.
The software assumes that the code is being
launched in an infinite loop thereby an exit
will make it reboot.
2014-11-14 10:27:19 +11:00
John Williams ae87399919 HAL_Linux: Basic Zynq Linux platform support
Preliminary support for Zynq/Linux on the 'ZyboPilot' HW platform.

see https://github.com/trjw/ZyboPilot-bsp for the PetaLinux / Vivado project
files.

At this stage CPPM/Pulse in and PWM out work, and in CLI mode the passthru
test works correctly.

The platform has passed minimal smoke testing in HIL mode.

ZYNQ IS NOT FLIGHT TESTED YET!  FLY THIS PLATFORM AT YOUR OWN RISK!

Signed-off-by: John Williams <john@whelanwilliams.net>
2014-11-14 10:21:04 +11:00
Andrew Tridgell adcf994356 AP_HAL: added Zynq platform type 2014-11-14 10:21:04 +11:00
Staroselskii Georgii 7f00dd413f AP_Compass: fixed HMC5883's initialisation code 2014-11-14 10:21:04 +11:00
Andrew Tridgell 3b6c732b3b APM_Control: changed default I gain for roll/pitch controllers to non-zero
too many people are still not tuning. At least this will give them a
chance to get their aircraft back in a cross-wind
2014-11-13 22:13:25 +11:00
Andrew Tridgell 258542b939 AP_Airspeed: added ARSPD_SKIP_CAL parameter
allows airspeed calibration to be skipped for easier startup
2014-11-13 21:12:37 +11:00
Andrew Tridgell 9c631944f7 AP_Airspeed: expose raw pressure for logging 2014-11-13 17:49:04 +11:00
Andrew Tridgell f04f8e226d SITL: abort on floating point error
this creates a core file
2014-11-13 17:27:20 +11:00
Andrew Tridgell 1fc8116069 AP_L1_Control: update NAV_L1_PERIOD docs 2014-11-13 14:26:42 +11:00
Andrew Tridgell 1552278fa3 AP_TECS: use aparm.stall_prevention 2014-11-13 14:05:33 +11:00
Andrew Tridgell 04b63a61bf AP_Vehicle: added stall_prevention variable 2014-11-13 14:05:22 +11:00
Andrew Tridgell 3667900e84 AP_SpdHgtControl: added load_factor in update_pitch_throttle() 2014-11-12 13:36:02 +11:00
Andrew Tridgell bf591b0008 AP_TECS: take load factor into account in min airspeed
this will push up minimum airspeed when turning
2014-11-12 13:36:02 +11:00
Andrew Tridgell d404cc6542 AP_Baro: add set_external_temperature()
this allows the use of an external temperature sensor for calibration
purposes, such as the sensor built in to the digital airspeed sensor.

The main affect this has is on the EAS2TAS calculation

The get_calibration_temperature() is used to choose either an external
temperature or an internal one. If an internal one is used then it is
clamped at no higher than 25 degrees C, to prevent hot electronics
on startup affecting altitude scaling and EAS2TAS
2014-11-12 13:36:01 +11:00
Andrew Tridgell 8b794602d1 AP_Baro: make get_temperature() a const function 2014-11-12 13:36:01 +11:00
Andrew Tridgell 986b7bf894 AP_InertialSensor: fixed frequency to 16 bit in LDM303D and L3GD20 drivers 2014-11-11 17:06:22 +11:00
Andrew Tridgell c750cbebfb GCS_MAVLink: prevent asan errors in send_text_all 2014-11-11 15:16:26 +11:00
Andrew Tridgell a566ebe4ec HAL_SITL: prevent array overruns in RCInput/RCOutput 2014-11-11 15:16:26 +11:00
Randy Mackay 67690553c5 BaroGlitch: add reset method 2014-11-09 13:34:15 -08:00
Andrew Tridgell 2eeec3fabe AP_RangeFinder: fixed oversized parameter RNGFND2_SETTLE_MS 2014-11-10 08:09:41 +11:00
Andrew Tridgell ec17c5806e AP_Param: check parameter tables for bad suffix lengths 2014-11-10 08:09:08 +11:00
Andrew Tridgell 00526359b0 HAL_Linux: use dprintf() instead of sprintf and write 2014-11-10 06:51:53 +11:00
Andrew Tridgell bec1c05773 AP_Notify: fixed bitfields 2014-11-10 06:33:54 +11:00
bugobliterator e48fcf2df7 AP_Notify:change tonealarm-type bitmask to bool type,
change parameter data type from const uint8_t to uint8_t,
initialise tonealarm error flag to value -1 at tonealarm class initiallisation

This is a part of a set of fixes for the bugs and typos tridge discovered and shared inside earlier commits for setting up tonealarm.
2014-11-10 06:27:49 +11:00
bugobliterator 9f5f5871f2 AP_Notify:Fix the typo, usage of toshibaled.init() instead of toshibaled.update()
This is a part of a set of fixes for the bugs and typos tridge discovered and shared inside earlier commits for setting up tonealarm.
2014-11-10 06:27:48 +11:00
bugobliterator af203760bd HAL_Linux: change the return type of AP_HAL::Util::tonealarm_init() to signed int8_t.
This is a part of a set of fixes for the bugs and typos tridge discovered and shared inside earlier commits for setting up tonealarm.
2014-11-10 06:27:48 +11:00
bugobliterator fa6e83318d AP_HAL: Add virtual toneAlarm member functions to be declared under Linux_HAL 2014-11-10 06:27:48 +11:00
bugobliterator 298b27444a HAL_Linux: Add ToneAlarm Driver to Linux_HAL
ToneAlarm is setup for Beaglebone Black using pwm, toneAlarm thread runs on second last priority.
2014-11-10 06:27:48 +11:00
bugobliterator 5d6af51517 AP_Notify:Add ToneAlarm Support for HAL_Linux Boards 2014-11-10 06:27:48 +11:00
Jonathan Challinger 2d288d46a4 AP_HAL_AVR_SITL: fill in ublox accuracy metrics with reasonable values 2014-11-08 19:07:50 +11:00
Randy Mackay 31087e4f20 Compass: shorten EXTERNAL2/3 to EXTERN2/3
Bug discovered by Michael Day
2014-11-08 10:21:22 +09:00
Robert Lefebvre a2958e2ffd AP_MotorsSingle: Fix parameter comments. 2014-11-08 10:18:03 +09:00
Randy Mackay 98f5a93e10 AC_AttControl: remove unused logging structure 2014-11-08 10:17:32 +09:00
Andrew Tridgell 02581f4c05 HAL_Linux: re-fix dirty mask bug in Storage
when conversion to a single parent class was done it re-introduced a
bug that was fixed a while ago

See commit d238ff7c5d
2014-11-08 11:55:55 +11:00
Andrew Tridgell 330dab2fe3 HAL_Linux: fixed some warnings 2014-11-08 11:49:09 +11:00
bugobliterator 4908e335d2 HAL_Linux: Add Storage.cpp containing common storage class member definitions 2014-11-08 11:36:12 +11:00
bugobliterator dd6d520385 HAL_Linux:Create subclass to handle FRAM Storage under main Storage Class 2014-11-08 11:36:09 +11:00
Victor Mayoral Vilches 46c8714996 AP_GPS: make the examples compile in Linux 2014-11-08 11:25:35 +11:00
Andrew Tridgell 14a6878bcd HAL_Linux: fixed termios settings on BBB initial boot
this should fix the problem of losing the GPS in flight
2014-11-07 22:15:28 +11:00
Andrew Tridgell e22c8b27a9 HAL_PX4: if there are no enabled channels don't send to PX4IO
this makes it possible to disable PWM output to IO to test override
2014-11-07 10:39:07 +11:00
Andrew Tridgell 16fd113020 RC_Channel: added channel_function()
this is used in the plane mixing code
2014-11-07 10:39:07 +11:00
Clay McClure 71586d40e3 AC_WPNav: minor fix to comments 2014-11-06 11:53:56 +09:00
squilter cab2010a8f AP_Arming: remove abbreviations from GCS messages 2014-11-06 11:13:26 +09:00
Jonathan Challinger 6c4d4713aa AP_NavEKF: Add parameter that specifies EKF-to-DCM/INAV fallback strictness 2014-11-06 10:03:52 +11:00
Jonathan Challinger 2293070a5b AP_GPS: Add uBlox accuracy metrics interface and logging 2014-11-06 07:38:41 +11:00
Jonathan Challinger 9be7039be1 DataFlash: add UBX3 message for accuracy logging 2014-11-06 07:38:41 +11:00
Jonathan Challinger d03ed7a2c3 AP_Mount: Added lead filter 2014-11-06 07:35:32 +11:00
Andrew Tridgell 7e3b8a30f5 HAL_PX4: use px4io generated values for servo output readback
this makes it easier to observe the behaviour of IO failsafe
2014-11-05 21:54:53 +11:00
Andrew Tridgell 2b48434e60 AP_TECS: fixed throttle demand on underspeed
thanks to Philipp Oettershagen for finding this bug!
2014-11-05 07:55:18 +11:00
priseborough d6508acfa5 AP_TECS : Prevent throttle undershoot after climb
If the plane was unable to achieve the climb and got significantly below the internal TECS demanded climb profile, the the PD term would be a large value at the top of climb, and would take some time to reduce due to the rate limiter. This meant that the integrator state could be pushed to a very low value and effectively cause the throttle to sit on the lower limit for longer than desired after levelling out.
2014-11-05 07:49:03 +11:00
Andrew Tridgell 3518cf5480 AP_InertialSensor: fixed default MPU9250 orientation for NavIO 2014-11-04 16:18:35 +11:00
Jonathan Challinger 369839c7ca AC_WPNav: Use target yaw instead of current yaw for close waypoints 2014-10-31 15:23:52 +09:00
Randy Mackay 1e4ec5f6a2 Camera: add f to float constants 2014-10-31 14:46:51 +09:00
Randy Mackay ad7a9bf81b Camera: initialise image_index 2014-10-31 14:46:49 +09:00
Arthur Benemann 7bb4a39608 Camera: record number of pictures taken since boot
The field is useful for detecting in a GCS if a mavlink_msg_camera_feedback message was dropped.
2014-10-31 14:46:45 +09:00
Arthur Benemann b48edf479b GCS_MAVLink: add CAMERA_FEEDBACK to enum 2014-10-31 14:46:40 +09:00
Arthur Benemann 2e4812afb5 Camera: Added feedback message support
Now the autopilot can publish the state of the camera via the mavlink_msg_camera_feedback message.
2014-10-31 14:46:38 +09:00
Jonathan Challinger 84da5d2d98 DataFlash: use new interface functions for EKF IMU weighting and accel biases 2014-10-30 18:17:38 +11:00
Jonathan Challinger 967986d5c6 AP_NavEKF: Split getAccelBias into getAccelZBias and getIMU1Weighting 2014-10-30 18:17:38 +11:00
Jonathan Challinger ac2e5f644c DataFlash: fix bug in ekf gyro bias logging 2014-10-30 18:17:37 +11:00
Jonathan Challinger bb6d8fd44a AP_NavEKF: Set prevDelAng after using it 2014-10-30 18:17:37 +11:00
priseborough aca78d321f DataFlash : Remove unused numerical divergence metric 2014-10-30 18:17:37 +11:00
Jonathan Challinger 0727ac5c79 AP_NavEKF: clean up unused variable lastDivergeTime_ms 2014-10-30 18:17:37 +11:00
priseborough 5e51c09978 AP_NavEKF : Remove ineffective numerical divergence checks 2014-10-30 18:17:37 +11:00
priseborough 638d63aa90 DataFlash : Change to more descriptive EKF logging names 2014-10-30 18:17:37 +11:00
priseborough 6f759fdb8e AP_AHRS : Tidy up logic used to enable synthetic sideslip fusion 2014-10-30 18:17:36 +11:00
Andrew Tridgell 8506e8b5fb HAL_Linux: fixed linux build 2014-10-30 17:47:18 +11:00
John Williams b9f0310b82 hal_ap_linux: Make PRU constants private to reduce #define namespace pollution.
Forthcoming Zynq port AP_HAL_Linux uses similar constants with different
values - move these as private member constants to avoid collisions.

Signed-off-by: John Williams <john@whelanwilliams.net>
2014-10-30 13:51:41 +11:00
Mikhail Avkhimenia 81de994fef HAL_Linux: separate RCInput for PRU and Navio 2014-10-30 13:30:07 +11:00
Mikhail Avkhimenia e05151f0e0 HAL_Linux: Initialize i2c before rcoutput (required by i2c pwm chips for initialization) 2014-10-30 13:30:07 +11:00
Mikhail Avkhimenia 2f0900b0a8 HAL_Linux: add GPIO driver for Raspberry Pi 2014-10-30 13:30:07 +11:00
Mikhail Avkhimenia 07ed93cea0 HAL_Linux: add PCA9685 based RCOutput for Navio 2014-10-30 13:30:07 +11:00
Alexander Mergel 14c401c0f4 AP_HAL_Linux: [Bugfix] prevent memory acces violation in process_dsm_pulse
When a S.Bus signal is fed into the rcin-Pin AruPlane on the BBB get's a
Segmentation fault. This patch prevents the memory acces to dsm_state.bytes[16] outside
of the array bounds. The patch should be reviewed by sombody who knows the DSM protocol,
as i don't.
2014-10-30 11:57:35 +11:00
priseborough 6a85753a5b AP_NavEKF : add INIT_GYRO_BIAS_UNCERTAINTY definition 2014-10-29 17:39:47 +09:00
priseborough fb14da7a4b AP_NavEKF : Add public method to reset gyro bias states 2014-10-29 15:32:21 +09:00
priseborough 2c07299c04 AP_AHRS : Add reset of EKF gyro bias states 2014-10-29 15:32:18 +09:00
Randy Mackay 8a776f8ff8 GPS: init primary_instance to zero 2014-10-29 12:04:13 +09:00
Benoit PEREIRA DA SILVA 010d267376 GPS: use primary for Notification 2014-10-29 12:04:12 +09:00
Jonathan Challinger 6848897999 AP_GPS: Add agcCnt to UBX1 message 2014-10-29 08:18:04 +11:00
Randy Mackay dffcfb42bc AHRS: add reset_gyro_drift method 2014-10-28 20:25:33 +09:00
Randy Mackay 7d48704f82 AP_NavEKF: fix parameter descriptions
Errors pointed out by Richard (DK)
2014-10-27 22:20:03 +09:00
Randy Mackay ac7ea2a12c AC_PosControl: use AttControl's sqrt_controller 2014-10-27 15:20:48 +09:00
Jonathan Challinger 7224669399 AC_AttitudeControl: cleanup angle_ef_roll_pitch_rate_ef_yaw_smooth 2014-10-27 15:20:46 +09:00
Jonathan Challinger 779baa006d AC_PosControl: Use sqrt_controller function 2014-10-27 15:20:44 +09:00
Jonathan Challinger 0c4a489491 AC_AttitudeControl: use sqrt_controller function 2014-10-27 15:20:43 +09:00
Randy Mackay fc898a00a3 AC_AttControl: add sqrt_controller
Original code by Jonathan Challinger
2014-10-27 15:20:40 +09:00
Andrew Tridgell 26de54c29a AP_AHRS: cope with 90 degree pitch in update_trig()
this prevents a numerical error in Replay
2014-10-25 11:21:04 +11:00
Michael Day 83c2f497a3 AP_Mission: Change jump_to_landing_sequence to get_landing_sequence_start 2014-10-24 21:42:06 +11:00
Andrew Tridgell 5ddbcc296d AP_OpticalFlow: fixed example build 2014-10-24 21:38:03 +11:00
Andrew Tridgell ad8b73c8aa AP_Airspeed: update ARSPD_AUTOCAL docs 2014-10-24 17:16:17 +11:00
Randy Mackay 41a6393356 RangeFinder: PulsedLight I2C addr to 0x62 2014-10-24 15:08:04 +09:00
Andrew Tridgell ad7c612334 AP_InertialSensor: fixed SITL with new HIL code 2014-10-24 15:05:44 +11:00
Andrew Tridgell aeaa3c1e04 AP_InertialSensor: fixed build for VRBrain 2014-10-24 12:10:41 +11:00
Andrew Tridgell 40e83ceb1f AP_InertialSensor: simplify next sample time calculations
this makes the calculation much clearer
2014-10-24 12:10:40 +11:00
Andrew Tridgell 9dfbdb1e69 AP_InertialSensor: run the MPU6000 at 1kHz on fast CPUs
use a software filter and 1kHz sampling for better filtering if we
have a fast enough CPU to do it
2014-10-24 12:10:40 +11:00
Andrew Tridgell a047d1f569 AP_InertialSensor: moved default filter and sample_rate to frontend
this simplifies the backends and prevents code repitition
2014-10-24 12:10:40 +11:00
Andrew Tridgell 17b2214798 AP_InertialSensor: make it easier to add multiple backends
use _add_backend() to add new backends on startup
2014-10-24 12:10:40 +11:00
Andrew Tridgell 868ee3af23 AP_Mission: fixed example build 2014-10-24 12:10:40 +11:00
Andrew Tridgell 006185f08a AP_InertialNav: fixed example build 2014-10-24 12:10:40 +11:00
Andrew Tridgell f79ce92673 AP_AHRS: fixed example build 2014-10-24 12:10:40 +11:00
Andrew Tridgell 33c7432e97 AC_WPNav: fixed example build 2014-10-24 12:10:40 +11:00
Andrew Tridgell 31eeb657ca AC_Sprayer: fixed example build 2014-10-24 12:10:39 +11:00
Andrew Tridgell 4fcf46005b AC_Fence: fixed example build 2014-10-24 12:10:39 +11:00
Andrew Tridgell 9a98e63702 AC_AttitudeControl: fixed example build 2014-10-24 12:10:39 +11:00
Andrew Tridgell bc5d79118d AP_InertialSensor: updated comments 2014-10-24 12:10:39 +11:00
Andrew Tridgell 3a9a5a9c18 AP_InertialSensor: implement gyro and accel health monitoring
sensor is healthy if it gave a sample on the last update()
2014-10-24 12:10:39 +11:00
Andrew Tridgell 586fa9a816 AP_InertialSensor: added product_id support
fill in parameter from first backend
2014-10-24 12:10:39 +11:00
Andrew Tridgell 37dea4e367 AP_Common: added MPU9250 product ID 2014-10-24 12:10:39 +11:00
Andrew Tridgell 520727e5bd AP_InertialSensor: fixed example build 2014-10-24 12:10:39 +11:00
Andrew Tridgell dbcd02f2be AP_InertialSensor: converted MPU9150 driver
untested conversion
2014-10-24 12:10:38 +11:00
Andrew Tridgell ff5f791343 AP_InertialSensor: converted flymaple driver to new API 2014-10-24 12:10:38 +11:00
Andrew Tridgell a42af0f2f1 AP_InertialSensor: use common AP_InertialSensor driver for PX4 and VRBRAIN 2014-10-24 12:10:38 +11:00
Andrew Tridgell 3ce7667e5a AP_InertialSensor: tidy up MPU6000 driver 2014-10-24 12:10:37 +11:00
Andrew Tridgell 2d47a07480 AP_InertialSensor: ported L3G4200D driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell deafcd6ddc AP_InertialSensor: improved timing in all drivers 2014-10-24 12:10:37 +11:00
Andrew Tridgell ff6d87f145 AP_InertialSensor: minor tidy up for HIL driver 2014-10-24 12:10:37 +11:00
Andrew Tridgell 85686c22ec AP_InertialSensor: converted the APM1/Oilpan driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell dcef9bb3b8 AP_InertialSensor: converted the MPU9250 driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell d48beb0c0f AP_InertialSensor: converted PX4 driver to new API 2014-10-24 12:10:37 +11:00
Andrew Tridgell 0ce5c99c26 SITL: update for new AP_InertialSensor API 2014-10-24 12:10:37 +11:00
Andrew Tridgell ec11417705 AP_InertialSensor: converted HIL backend, which gets SITL working 2014-10-24 12:10:36 +11:00
Andrew Tridgell 448efc70a3 AP_InertialSensor: first steps in frontend/backend split
This converts the MPU6000 driver to a frontend/backend structure, and
disables all other drivers. They will be progressively re-enabled as
each is converted
2014-10-24 12:10:36 +11:00
Randy Mackay 04eb1073e8 DataFlash: log baro climbrate 2014-10-22 17:29:27 +09:00
Andrew Tridgell e6c6fe095f AP_Terrain: fixed a warning 2014-10-22 18:27:20 +11:00
Andrew Tridgell b495905da5 AP_TECS: fixed some warnings 2014-10-22 18:27:18 +11:00
Andrew Tridgell 59610ebe88 AP_L1_Control: fixed some warnings 2014-10-22 18:27:16 +11:00
Andrew Tridgell b8e73a737a HAL_AVR: fixed warning 2014-10-22 18:26:45 +11:00
Randy Mackay e80328d3a5 AC_WPNav: bug fix sanity check of set_speed_xy
This corrects a bug that allowed the waypoint speed to be set to zero
2014-10-21 22:10:22 +09:00
Randy Mackay 39c8535223 AHRS_DCM: sanity check AHRS_RP_P and AHRS_YAW_P 2014-10-21 21:41:41 +09:00
priseborough 2bc74934b8 AP_NavEKF: Track baro alt when pre-armed
This will help prevent spurious alt disparity warning messages for copter
2014-10-21 20:58:59 +09:00
Randy Mackay a1cfd03c9b AC_PosControl: bug fix dt calculation
fixes issue in which now could be earlier than _last_update_xy_ms
leading to a large dt value and a sudden lean on takeoff
2014-10-21 11:40:47 +09:00
Randy Mackay 0e11189c35 AP_InertialNav: add comments 2014-10-20 11:12:54 +09:00
Jonathan Challinger 5e381280dc AP_InertialNav: update properly if home position moves 2014-10-20 10:59:50 +09:00
Andrew Tridgell d84c1cd3e4 AP_OpticalFlow: fixed example build 2014-10-20 08:42:51 +11:00
Andrew Tridgell 15a661e17a AP_Mission: fixed logic in jump_to_landing_sequence()
see comments on drones-discuss
2014-10-20 08:36:20 +11:00
Andrew Tridgell 8c6b875dcc AP_Mission: avoid the AP_AHRS cast
get_position() is now const
2014-10-20 08:36:20 +11:00
Andrew Tridgell 270bac4472 AP_AHRS: make get_position() const
This allows use from within AP_Mission
2014-10-20 08:36:20 +11:00
Michael Day ea91f4d47b AP_Mission: Added support for MAV_CMD_DO_LAND_START 2014-10-20 08:36:19 +11:00
Michael Day d62b9a7044 GCS_MAVLink: re-generated headers 2014-10-20 08:36:19 +11:00
Andrew Tridgell e1a88a13a7 GCS_MAVLink: added MAV_CMD_DO_LAND_START
see discussion on drones-discuss
2014-10-20 08:36:19 +11:00
Andrew Tridgell 7636cc6971 GCS_MAVLink: merged upstream changes 2014-10-20 08:36:19 +11:00
Jonathan Challinger 1c75ce88f2 AP_Buffer: change pop_front to return a bool if successful 2014-10-20 08:26:14 +11:00
Jonathan Challinger ceef10cc41 AP_Buffer: Add peek_mutable function allowing in-place modification of buffered objects 2014-10-20 08:26:14 +11:00
Jonathan Challinger 630a87d9a9 AP_Buffer: remove scalar assignment so that non-scalars can be buffered 2014-10-20 08:26:14 +11:00
Jonathan Challinger cdd2199138 AP_Math: expand frame transformation test case for quaternions 2014-10-20 06:24:33 +11:00
Jonathan Challinger 3befe74afa AP_Math: change quaternion class to use const references where optimal 2014-10-20 06:24:30 +11:00
Jonathan Challinger 70845882a7 AP_Math: fix up rotation test suite 2014-10-20 06:24:27 +11:00
Jonathan Challinger 6076f3fa22 AP_NavEKF: Quaternion::to_euler now uses references instead of pointers 2014-10-20 06:24:25 +11:00
Jonathan Challinger 1f7e393e38 AP_Math: refactor quaternion library 2014-10-20 06:24:22 +11:00
Andrew Tridgell ef0eca4835 AP_Airspeed: fixed airspeed in Replay 2014-10-19 19:42:15 +11:00
Andrew Tridgell 7db0244dac AP_Compass: added some comments 2014-10-19 17:02:45 +11:00
Jonathan Challinger 9054dd3f9a AP_Compass: use apply_correction_function to eliminate duplication 2014-10-19 17:02:45 +11:00
Randy Mackay 677f6cce7f AP_Motors: reduce slow-start increment for fast CPUs 2014-10-18 20:54:08 +09:00
Randy Mackay 542ec29e49 Parachute: set servo or relay to off position on every update
This resolves the issue of the parachute servo's position not being
initialised to the off position due to an ordering problem of the
auxiliary servos being initialised after the parachute object.
2014-10-18 17:26:23 +09:00
Randy Mackay eed6a1ce61 OptFlow: fix example sketch so it compiles 2014-10-16 13:52:07 +09:00
Randy Mackay a476a914b0 OptFlow_PX4: check healthy before updating 2014-10-15 16:36:40 +09:00
Randy Mackay f504ea7b30 OptFlow_ADNS3080: check healthy before updating 2014-10-15 16:36:38 +09:00
Randy Mackay d238f48dda OptFlowPX4: fix compile error for APM 2014-10-15 16:36:33 +09:00
Randy Mackay a9cfbb71b8 OptFlowPX4: use ORB to pull data from sensor
This change is required because PX4Firmware has changed the method used
to pull data from the sensor.
2014-10-15 16:36:25 +09:00
Randy Mackay ec4581b35a OptFlow: add ground_distance_m 2014-10-15 16:35:48 +09:00
Randy Mackay 4b0548973a OptFlow: add PX4Flow support 2014-10-15 16:35:33 +09:00
Randy Mackay 3c4be75487 OptFlow: reorganise ADNS3080 to simplified interface 2014-10-15 16:35:31 +09:00
Randy Mackay b64f9ed964 OptFlow: rename and restructure OpticalFlow class
AP_OpticalFlow.h becomes simply a file that includes all other optical
flow header files.
OpticalFlow class simplified to only return surface quality, raw output
and velocity vector.
2014-10-15 16:35:29 +09:00
Andrew Tridgell 4ad643b233 AP_AHRS: use a common function for updating the CD values
this ensures the wrapping of yaw is consistent between the 3 use cases
2014-10-15 13:18:08 +11:00
Andrew Tridgell eec5cd5add AP_AHRS: restore DCM attitude before update()
The DCM drift correction code uses the current attitude to calculate
error values to update its gyro drift correction. If we were using EKF
then without this patch the DCM code running as an alternative AHRS
source would be using the EKF attitude for calculating the error
value, leading to very bad gyro drift estimation
2014-10-15 11:15:33 +11:00
Andrew Tridgell 63c06ea2af AP_AHRS: fixed calls to DCM in parent class
use_compass() and reset() are common to AP_AHRS_DCM and
AP_AHRS_NavEKF. As AP_AHRS_NavEKF is a child of AP_AHRS_DCM, when we
call use_compass() from within AP_AHRS_DCM we actually end up calling
AP_AHRS_NavEKF::use_compass().

This has the effect of disabling the compass in DCM when EKF is active
and EKF has decided not to use the compass. That means that the DCM
yaw (and in fact the whole attitude) can get badly off while EKF is
enabled, making DCM an ineffective fallback if EKF fails.

The fix is to call the specific class versions of use_compass() and
reset()
2014-10-15 10:12:50 +11:00
Andrew Tridgell b437977547 AP_Compass: added set_offsets() interface
this will be used by Replay to prevent the need for saving parameters
2014-10-15 09:16:31 +11:00
Randy Mackay 6690aff305 AC_Motors: param description addition 2014-10-14 12:43:22 +09:00
Randy Mackay d09faa0015 BattMon: minor param description additions 2014-10-14 12:42:57 +09:00
Randy Mackay 45e0e48e54 BattMon: minor param description update 2014-10-14 12:42:45 +09:00
Randy Mackay 3a81732721 Baro: minor param description updates 2014-10-14 12:42:27 +09:00
Randy Mackay be1621877f Mission: support GUIDED_ENABLE and GUIDED_LIMITS
This replaces the ardupilot only NAV_GUIDED command.
Also remove support for NAV_VELOCITY mission command which will be
replaced by SET_POSITION_TARGET non-mission command.
2014-10-13 21:40:23 +09:00
Andrew Tridgell 3c7cc5f40c AP_RangeFinder: auto-update PX4 ll40ls max/min distance
this allows the range of the Lidar to be set by the user using
RNGFND_MAX_CM and RNGFND_MIN_CM
2014-10-13 19:07:38 +11:00
Jonathan Challinger 4a397a8d67 AC_PosControl: Protect from divide-by-zero in get_stopping_point_xy 2014-10-10 21:17:12 +09:00
Randy Mackay 023b2c0d6b AP_InertialNav: fixed use of ahrs.get_velocity with EKF disabled 2014-10-09 16:43:24 +09:00
Andrew Tridgell 7b02d326f6 AP_InertialNav: fixed use of _ahrs.get_relative_position_NED() with EKF disabled
this prevents a floating point error caused by using an uninitialised
vector3 when switching between DCM and EKF control in AP_InertialNav

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-10-09 18:30:20 +11:00
Andrew Tridgell 39fadad7d6 HAL_Linux: fixed build warnings 2014-10-09 16:49:23 +11:00
Andrew Tridgell b3894e8b10 HAL_VRBRAIN: reduce the number of times we split up UART reads and writes 2014-10-09 12:29:25 +11:00
Andrew Tridgell 10b0ca7ea8 HAL_PX4: reduce the number of times we split up UART reads and writes 2014-10-09 12:29:25 +11:00
Andrew Tridgell c834589daa HAL_Linux: reduce the number of times we split up UART reads 2014-10-09 12:29:25 +11:00
Andrew Tridgell 076bb1294e HAL_Linux: improved UDP packetisation and add flow control reporting
report we have flow control on UDP and TCP
2014-10-09 12:29:25 +11:00
Randy Mackay 834f2bea07 INS: add gyro_calibrated_ok_all method
This returns true if the gyros have been calibrated successfully
2014-10-09 10:00:07 +09:00
Andrew Tridgell 70ca87c4e6 AP_RangeFinder: handle all I2C rangefinder types on PX4 in PX4Firmware 2014-10-09 11:06:16 +11:00
Andrew Tridgell cebfef3ead HAL_Linux: don't accept less than 5 input channels 2014-10-09 09:19:35 +11:00
Andrew Tridgell a3fee16604 HAL_Linux: added DSM/Spektrum RCInput support
this decodes DSM using the RCIN pulses from the PRU
2014-10-08 12:50:50 +11:00
Andrew Tridgell 3e3f87188b HAL_Linux: enable DSM power pin 2014-10-08 12:50:50 +11:00
Andrew Tridgell 50e5ae6f7a HAL_Linux: added low level DSM decoder
based on dsm.c from PX4 project
2014-10-08 12:50:50 +11:00
Andrew Tridgell 9b207d029d HAL_Linux: change ring buffer to 300 entries 2014-10-07 14:57:34 +11:00
Andrew Tridgell b1845ed00d HAL_Linux: initial support for parallel SBUS and PPM-SUM decoding 2014-10-07 14:57:34 +11:00
Andrew Tridgell 42e9dc3c31 HAL_Linux: added SBUS decoder from PX4 project
thanks Lorenz!
2014-10-07 14:57:34 +11:00
Andrew Tridgell 809b6cc855 AP_AHRS: added get_yaw_rate_earth()
used to estimate course correction on takeoff
2014-10-07 07:17:46 +11:00
Craig Elder be352e9471 AP_GPS: Removed CFG-DAT message from 3DR-Ublox-NEO7
CFG-DAT is generated by U-Center but no longer used by the receiver.
2014-10-06 11:21:42 -07:00
Andrew Tridgell e0e534628b HAL_Linux: support direct UDP output from UART drivers
this allows safe operation over WiFi links without MAVProxy
2014-10-06 15:13:03 +11:00
Randy Mackay 1754cacf3c AC_PosControl: remove completed to-do comments 2014-10-04 23:49:24 +09:00
Randy Mackay f65e81cb07 AC_AttControl: remove some old comments 2014-10-04 23:49:21 +09:00
Randy Mackay 793ed20534 CoaxCopter: set throttle upper and lower flags 2014-10-04 23:49:19 +09:00
Randy Mackay 57f6d0ff60 SingleCopter: set throttle upper and lower flags 2014-10-04 23:49:16 +09:00
Randy Mackay 85fb4b122a MotorsMatrix: _min_throttle interpreted as 0 ~ 1000 range for throttle_lower flag
Also trigger throttle_upper flag when throttle in reaches 1000
2014-10-04 23:49:14 +09:00
Randy Mackay 91e5201439 Tri: _min_throttle interpreted as 0~1000 range for throttle_lower flag
limit.throttle_lower flag becomes true when the throttle passed into the
motors lib (which is in the 0 ~ 1000 range) is below _min throttle.
This makes the interpretation of the THR_MIN parameter consistent
between the main code (which uses 0 ~ 1000 range) and the motors lib
(which previously used the RC3_MIN ~ RC3_MAX range).
The remaining problem however is that the output of the motors continues
to use THR_MIN as if it were a pwm.  I don't believe this is a dangerous
problem however.
2014-10-04 23:49:11 +09:00
Craig Elder 7367ea04a7 AP_GPS: Adding support for the NEO7 GPS 2014-10-03 03:21:28 -07:00
priseborough 8aa267f75f AP_NavEKF : Fix bug in reset of GPS glitch offset
The GPS glitch offset was being zeroed during position resets. This caused the filter to reject subsequent GPS measurements if the GPS error persisted long enough to invoke a timeout and a position reset.
2014-10-03 09:17:03 +10:00
Randy Mackay b3bbec24e4 RangeFinder: TYPE param description to PX4-I2C 2014-10-02 20:24:14 +09:00
Randy Mackay 8ce4893180 RangeFinder: TYPE param description to PX4-MaxbotixI2C
This hopefully reduces confusion for PX4/Pixhawk users with MaxBotix I2C
sonar
2014-10-02 16:49:15 +09:00
Randy Mackay 85eee31510 AHRS: rename ekfNotStarted method to initialised
Also created default implementation in AP_AHRS class so AP_AHRS_DCM does
not need to implement it.
2014-10-02 14:40:54 +09:00
priseborough 7cea7c6a18 AP_AHRS : add method to report if EKF is waiting to start 2014-10-02 14:38:29 +09:00
Andrew Tridgell 60aa017e11 GCS_MAVLink: added handle_set_mode() function 2014-10-01 14:19:04 +10:00
Randy Mackay 7caa611eb1 Compass_HIL: use instance specific orient and external 2014-10-01 13:02:03 +10:00
Randy Mackay 86aac4f40c Compass_HMC5843: use instance specific orient and external 2014-10-01 13:02:03 +10:00
Randy Mackay 900896977c Compass_VRBrain: use instance specific orient and external 2014-10-01 13:02:03 +10:00
Randy Mackay 85e82a0399 Compass_PX4: use instance specific orient and external 2014-10-01 13:02:03 +10:00
Randy Mackay 023b6afe8b Compass: add ORIENT2 and EXTERNAL2 params 2014-10-01 13:02:03 +10:00
Randy Mackay 16058cb730 Compass_VRBrain: primary compass based on use_for_yaw 2014-10-01 13:02:02 +10:00
Randy Mackay 01fa4ba619 Compass_PX4: primary compass based on use_for_yaw 2014-10-01 13:02:02 +10:00
Randy Mackay 798cc36e64 Compass: use_for_yaw for each compass 2014-10-01 13:02:02 +10:00
Randy Mackay 84d792216e Compass: use_for_yaw to use primary compass health
This allows the internal compass to be used if the external compass
fails.
2014-10-01 13:02:02 +10:00
Andrew Tridgell d6c56b8f7a AP_NavEKF: make it clear that all sat counts are covered 2014-10-01 12:55:29 +10:00
Andrew Tridgell a1f5be5b9e AP_NavEKF: simplify variable handling in EKF
use named state variables instead of states[] array where possible.
2014-10-01 12:55:29 +10:00
priseborough 8223a0d193 AP_NavEKF : Explicitly initialise gpsNoiseScaler to default value 2014-10-01 12:55:29 +10:00
priseborough b61a6c64d7 AP_NavEKF : Reduce weighting on GPS when not enough satellites
GPS measurement variance is doubled if only 5 satellites, and quadrupled if 4 or less.
The GPS glitch rejection thresholds remain the same
This will reduce the impact of GPS glitches on attitude.
2014-10-01 12:55:29 +10:00
priseborough 7370e07c8d AP_AHRS : Prevent EKF starting if GPS sats less than AHRS_GPS_MINSATS 2014-10-01 12:55:29 +10:00
priseborough f99f5759f5 AP_NavEKF : Fix bug in GPS innovation variance growth calculation
The uncertainty in acceleration is currently only scaled using horizontal accelerations, however during vertical plane aerobatics and high g pullups, misalignment in angles can cause significant horizontal acceleration error.
The scaling now uses the 3D acceleration vector length to better work during vertical plane high g maneouvres.
This error was found during flight testing with 8g pullups
2014-10-01 12:55:29 +10:00
priseborough f0ee11e951 AP_NavEKF : Fix bug in reset of position, height and velocity states
If the inertial solution velocity or position needs to be reset to the GPS or baro, the stored state history for the corresponding states should also be reset.
Otherwise the next GPS or baro measurement will be compared to an invalid previous state and will be rejected. This is particularly a problem if IMU saturation or timeout has occurred because the previous states could be out by a large amount
The position state should be reset to a GPS position corrected for velocity and measurement latency. This will make a noticeable difference for high speed flight vehicles, eg 11m at 50m/s.
2014-10-01 12:55:28 +10:00
Randy Mackay e7b4a02d26 GPS: fix SIRF set-binary message
This fixes an issue in which the the update rate for the mediatek, which
uses a similar protocol, was not being set correctly
2014-10-01 11:42:31 +09:00
Andrew Tridgell f6cc8ce5bc GCS_MAVLink: fixed log erase and log request end 2014-10-01 11:45:51 +10:00
Randy Mackay 47c135c4e1 GCS_MAVLink: add comments around checking target 2014-09-30 15:18:35 +10:00
Randy Mackay 0322a876eb GCS_MAVLink: check target before erasing log 2014-09-30 15:18:31 +10:00
Randy Mackay dbe1c55666 AC_WPNav: add shift_wp_origin_to_current_pos for takeoff
This shifts the origin to the vehicle's current position and should be
called just before take-off to ensure there are no sudden roll or pitch
moves on takeoff.
2014-09-29 15:26:18 +09:00
Randy Mackay 0803d79701 INS: param descriptions for ACC2, GYR2 2014-09-27 21:05:33 +09:00
Randy Mackay e14ae0c0b1 Compass: param descriptions for OFS2, MOT2 2014-09-27 17:59:26 +09:00
Randy Mackay 5ca3c4baf6 Mission: fix CHANGE_ALT to store climb rate in lat param
The slightly confusing storage of climb rate in the lat field led to a
bug fix a few months ago that actually created a bug.
2014-09-26 23:23:04 +09:00
Andrew Tridgell 5eee51b5a4 APM_OBC: added heartbeat() method
this is used for when the plane is calibrating sensors, to ensure
heartbeat is continued to the failsafe board
2014-09-24 12:02:38 +10:00
Randy Mackay c2c5807ec7 Compass: always default devid to zero 2014-09-23 20:35:18 +09:00