2015-05-29 23:12:49 -03:00
# include "Copter.h"
2013-08-29 02:34:47 -03:00
/*
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 3 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
2012-02-12 07:26:36 -04:00
/*
2012-08-21 23:19:50 -03:00
* ArduCopter parameter definitions
*
*/
2015-05-29 23:12:49 -03:00
# define GSCALAR(v, name, def) { copter.g.v.vtype, name, Parameters::k_param_ ## v, &copter.g.v, {def_value : def} }
# define ASCALAR(v, name, def) { copter.aparm.v.vtype, name, Parameters::k_param_ ## v, (const void *)&copter.aparm.v, {def_value : def} }
# define GGROUP(v, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## v, &copter.g.v, {group_info : class::var_info} }
# define GOBJECT(v, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## v, (const void *)&copter.v, {group_info : class::var_info} }
2017-01-09 05:54:18 -04:00
# define GOBJECTPTR(v, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## v, (const void *)&copter.v, {group_info : class::var_info}, AP_PARAM_FLAG_POINTER }
2017-03-14 06:47:18 -03:00
# define GOBJECTVARPTR(v, name, var_info_ptr) { AP_PARAM_GROUP, name, Parameters::k_param_ ## v, (const void *)&copter.v, {group_info_ptr : var_info_ptr}, AP_PARAM_FLAG_POINTER | AP_PARAM_FLAG_INFO_POINTER }
2015-05-29 23:12:49 -03:00
# define GOBJECTN(v, pname, name, class) { AP_PARAM_GROUP, name, Parameters::k_param_ ## pname, (const void *)&copter.v, {group_info : class::var_info} }
2012-02-12 07:26:36 -04:00
2019-07-03 02:13:03 -03:00
# if FRAME_CONFIG == HELI_FRAME
// 6 here is AP_Motors::MOTOR_FRAME_HELI
# define DEFAULT_FRAME_CLASS 6
# else
# define DEFAULT_FRAME_CLASS 0
# endif
2015-10-25 14:03:46 -03:00
const AP_Param : : Info Copter : : var_info [ ] = {
2020-02-18 01:52:05 -04:00
// @Param: FORMAT_VERSION
2012-12-10 08:45:57 -04:00
// @DisplayName: Eeprom format version number
// @Description: This value is incremented when changes are made to the eeprom format
// @User: Advanced
2016-02-28 19:35:40 -04:00
// @ReadOnly: True
2020-02-18 01:52:05 -04:00
GSCALAR ( format_version , " FORMAT_VERSION " , 0 ) ,
2012-12-10 08:45:57 -04:00
// @Param: SYSID_THISMAV
2015-05-10 21:21:13 -03:00
// @DisplayName: MAVLink system ID of this vehicle
// @Description: Allows setting an individual MAVLink system id for this vehicle to distinguish it from others on the same network
2014-01-13 21:11:00 -04:00
// @Range: 1 255
2012-12-10 08:45:57 -04:00
// @User: Advanced
2012-08-21 23:19:50 -03:00
GSCALAR ( sysid_this_mav , " SYSID_THISMAV " , MAV_SYSTEM_ID ) ,
2013-01-02 05:50:25 -04:00
// @Param: SYSID_MYGCS
// @DisplayName: My ground station number
// @Description: Allows restricting radio overrides to only come from my ground station
2020-05-04 23:20:46 -03:00
// @Range: 1 255
2013-01-02 05:50:25 -04:00
// @User: Advanced
2012-08-21 23:19:50 -03:00
GSCALAR ( sysid_my_gcs , " SYSID_MYGCS " , 255 ) ,
2012-07-05 03:33:40 -03:00
2015-04-16 01:54:29 -03:00
// @Param: PILOT_THR_FILT
// @DisplayName: Throttle filter cutoff
// @Description: Throttle filter cutoff (Hz) - active whenever altitude control is inactive - 0 to disable
// @User: Advanced
// @Units: Hz
// @Range: 0 10
// @Increment: .5
GSCALAR ( throttle_filt , " PILOT_THR_FILT " , 0 ) ,
2015-04-30 03:06:55 -03:00
// @Param: PILOT_TKOFF_ALT
// @DisplayName: Pilot takeoff altitude
// @Description: Altitude that altitude control modes will climb to when a takeoff is triggered with the throttle stick.
// @User: Standard
2017-05-02 10:36:10 -03:00
// @Units: cm
2015-04-30 03:06:55 -03:00
// @Range: 0.0 1000.0
// @Increment: 10
2015-04-30 02:24:48 -03:00
GSCALAR ( pilot_takeoff_alt , " PILOT_TKOFF_ALT " , PILOT_TKOFF_ALT_DEFAULT ) ,
2015-04-30 03:06:55 -03:00
2015-04-30 03:04:17 -03:00
// @Param: PILOT_THR_BHV
// @DisplayName: Throttle stick behavior
2018-07-02 11:39:06 -03:00
// @Description: Bitmask containing various throttle stick options. TX with sprung throttle can set PILOT_THR_BHV to "1" so motor feedback when landed starts from mid-stick instead of bottom of stick.
2015-04-30 03:04:17 -03:00
// @User: Standard
2016-01-11 19:59:42 -04:00
// @Values: 0:None,1:Feedback from mid stick,2:High throttle cancels landing,4:Disarm on land detection
// @Bitmask: 0:Feedback from mid stick,1:High throttle cancels landing,2:Disarm on land detection
2015-04-30 03:04:17 -03:00
GSCALAR ( throttle_behavior , " PILOT_THR_BHV " , 0 ) ,
2015-01-19 09:52:54 -04:00
// @Group: SERIAL
// @Path: ../libraries/AP_SerialManager/AP_SerialManager.cpp
GOBJECT ( serial_manager , " SERIAL " , AP_SerialManager ) ,
2012-08-21 23:19:50 -03:00
2012-08-29 20:03:01 -03:00
// @Param: TELEM_DELAY
2012-10-21 18:32:39 -03:00
// @DisplayName: Telemetry startup delay
2012-08-29 20:03:01 -03:00
// @Description: The amount of time (in seconds) to delay radio telemetry to prevent an Xbee bricking on power up
2013-11-26 09:17:02 -04:00
// @User: Advanced
2017-05-02 10:36:10 -03:00
// @Units: s
2016-08-29 03:29:05 -03:00
// @Range: 0 30
2012-08-29 20:03:01 -03:00
// @Increment: 1
GSCALAR ( telem_delay , " TELEM_DELAY " , 0 ) ,
2015-05-22 21:04:54 -03:00
// @Param: GCS_PID_MASK
// @DisplayName: GCS PID tuning mask
// @Description: bitmask of PIDs to send MAVLink PID_TUNING messages for
// @User: Advanced
2019-04-12 21:58:09 -03:00
// @Values: 0:None,1:Roll,2:Pitch,4:Yaw,8:AccelZ
// @Bitmask: 0:Roll,1:Pitch,2:Yaw,3:AccelZ
2015-05-22 21:04:54 -03:00
GSCALAR ( gcs_pid_mask , " GCS_PID_MASK " , 0 ) ,
2018-03-14 17:17:30 -03:00
# if MODE_RTL_ENABLED == ENABLED
2013-01-02 05:50:25 -04:00
// @Param: RTL_ALT
2012-08-21 23:19:50 -03:00
// @DisplayName: RTL Altitude
2018-07-03 05:02:12 -03:00
// @Description: The minimum alt above home the vehicle will climb to before returning. If the vehicle is flying higher than this value it will return at its current altitude.
2017-05-02 10:36:10 -03:00
// @Units: cm
2021-09-15 01:00:54 -03:00
// @Range: 200 300000
2012-08-21 23:19:50 -03:00
// @Increment: 1
// @User: Standard
2012-11-29 08:08:19 -04:00
GSCALAR ( rtl_altitude , " RTL_ALT " , RTL_ALT ) ,
2016-05-31 00:18:43 -03:00
2016-01-06 03:00:29 -04:00
// @Param: RTL_CONE_SLOPE
// @DisplayName: RTL cone slope
// @Description: Defines a cone above home which determines maximum climb
// @Range: 0.5 10.0
// @Increment: .1
2016-01-07 04:21:31 -04:00
// @Values: 0:Disabled,1:Shallow,3:Steep
2016-01-06 03:00:29 -04:00
// @User: Standard
2016-05-31 00:18:43 -03:00
GSCALAR ( rtl_cone_slope , " RTL_CONE_SLOPE " , RTL_CONE_SLOPE_DEFAULT ) ,
2012-08-21 23:19:50 -03:00
2015-10-19 21:19:37 -03:00
// @Param: RTL_SPEED
// @DisplayName: RTL speed
// @Description: Defines the speed in cm/s which the aircraft will attempt to maintain horizontally while flying home. If this is set to zero, WPNAV_SPEED will be used instead.
// @Units: cm/s
// @Range: 0 2000
// @Increment: 50
// @User: Standard
GSCALAR ( rtl_speed_cms , " RTL_SPEED " , 0 ) ,
2018-03-14 17:17:30 -03:00
// @Param: RTL_ALT_FINAL
// @DisplayName: RTL Final Altitude
// @Description: This is the altitude the vehicle will move to as the final stage of Returning to Launch or after completing a mission. Set to zero to land.
// @Units: cm
2020-04-25 05:30:24 -03:00
// @Range: 0 1000
2018-03-14 17:17:30 -03:00
// @Increment: 1
// @User: Standard
GSCALAR ( rtl_alt_final , " RTL_ALT_FINAL " , RTL_ALT_FINAL ) ,
// @Param: RTL_CLIMB_MIN
// @DisplayName: RTL minimum climb
// @Description: The vehicle will climb this many cm during the initial climb portion of the RTL
// @Units: cm
// @Range: 0 3000
// @Increment: 10
// @User: Standard
GSCALAR ( rtl_climb_min , " RTL_CLIMB_MIN " , RTL_CLIMB_MIN_DEFAULT ) ,
// @Param: RTL_LOIT_TIME
// @DisplayName: RTL loiter time
// @Description: Time (in milliseconds) to loiter above home before beginning final descent
// @Units: ms
// @Range: 0 60000
// @Increment: 1000
// @User: Standard
GSCALAR ( rtl_loiter_time , " RTL_LOIT_TIME " , RTL_LOITER_TIME ) ,
2021-01-07 08:18:31 -04:00
// @Param: RTL_ALT_TYPE
// @DisplayName: RTL mode altitude type
// @Description: RTL altitude type. Set to 1 for Terrain following during RTL and then set WPNAV_RFND_USE=1 to use rangefinder or WPNAV_RFND_USE=0 to use Terrain database
// @Values: 0:Relative to Home, 1:Terrain
// @User: Standard
GSCALAR ( rtl_alt_type , " RTL_ALT_TYPE " , 0 ) ,
2018-03-14 17:17:30 -03:00
# endif
2013-04-29 09:30:22 -03:00
// @Param: FS_GCS_ENABLE
// @DisplayName: Ground Station Failsafe Enable
2020-11-02 21:27:41 -04:00
// @Description: Controls whether failsafe will be invoked (and what action to take) when connection with Ground station is lost for at least 5 seconds. See FS_OPTIONS param for additional actions, or for cases allowing Mission continuation, when GCS failsafe is enabled.
2021-08-17 11:30:03 -03:00
// @Values: 0:Disabled/NoAction,1:RTL,2:RTL or Continue with Mission in Auto Mode (Removed in 4.0+-see FS_OPTIONS),3:SmartRTL or RTL,4:SmartRTL or Land,5:Land,6:Auto DO_LAND_START or RTL
2013-04-29 09:30:22 -03:00
// @User: Standard
2019-12-23 00:39:08 -04:00
GSCALAR ( failsafe_gcs , " FS_GCS_ENABLE " , FS_GCS_DISABLED ) ,
2013-04-29 09:30:22 -03:00
2013-08-15 01:04:43 -03:00
// @Param: GPS_HDOP_GOOD
// @DisplayName: GPS Hdop Good
2013-10-13 01:53:26 -03:00
// @Description: GPS Hdop value at or below this value represent a good position. Used for pre-arm checks
2013-08-15 01:04:43 -03:00
// @Range: 100 900
// @User: Advanced
GSCALAR ( gps_hdop_good , " GPS_HDOP_GOOD " , GPS_HDOP_GOOD_DEFAULT ) ,
2012-08-21 23:19:50 -03:00
// @Param: SUPER_SIMPLE
2013-11-26 09:35:11 -04:00
// @DisplayName: Super Simple Mode
2021-11-23 17:49:06 -04:00
// @Description: Bitmask to enable Super Simple mode for some flight modes. Setting this to Disabled(0) will disable Super Simple Mode. The bitmask is for flight mode switch positions
// @Bitmask: 0:SwitchPos1, 1:SwitchPos2, 2:SwitchPos3, 3:SwitchPos4, 4:SwitchPos5, 5:SwitchPos6
2012-08-21 23:19:50 -03:00
// @User: Standard
2014-02-03 08:06:58 -04:00
GSCALAR ( super_simple , " SUPER_SIMPLE " , 0 ) ,
2012-08-21 23:19:50 -03:00
2013-04-18 03:30:18 -03:00
// @Param: WP_YAW_BEHAVIOR
// @DisplayName: Yaw behaviour during missions
// @Description: Determines how the autopilot controls the yaw during missions and RTL
2013-07-20 03:46:19 -03:00
// @Values: 0:Never change yaw, 1:Face next waypoint, 2:Face next waypoint except RTL, 3:Face along GPS course
2013-11-26 09:35:11 -04:00
// @User: Standard
2013-04-20 03:36:24 -03:00
GSCALAR ( wp_yaw_behavior , " WP_YAW_BEHAVIOR " , WP_YAW_BEHAVIOR_DEFAULT ) ,
2012-12-09 05:04:31 -04:00
2012-11-24 09:50:09 -04:00
// @Param: LAND_SPEED
// @DisplayName: Land speed
// @Description: The descent speed for the final stage of landing in cm/s
2013-06-23 03:52:46 -03:00
// @Units: cm/s
2013-11-19 03:46:16 -04:00
// @Range: 30 200
2012-11-24 09:50:09 -04:00
// @Increment: 10
// @User: Standard
GSCALAR ( land_speed , " LAND_SPEED " , LAND_SPEED ) ,
2016-03-29 22:03:41 -03:00
// @Param: LAND_SPEED_HIGH
// @DisplayName: Land speed high
// @Description: The descent speed for the first stage of landing in cm/s. If this is zero then WPNAV_SPEED_DN is used
// @Units: cm/s
// @Range: 0 500
// @Increment: 10
// @User: Standard
GSCALAR ( land_speed_high , " LAND_SPEED_HIGH " , 0 ) ,
2017-11-08 09:25:53 -04:00
// @Param: PILOT_SPEED_UP
// @DisplayName: Pilot maximum vertical speed ascending
// @Description: The maximum vertical ascending velocity the pilot may request in cm/s
2017-05-02 10:36:10 -03:00
// @Units: cm/s
2014-04-30 00:05:02 -03:00
// @Range: 50 500
2012-12-21 23:52:49 -04:00
// @Increment: 10
// @User: Standard
2017-11-08 09:25:53 -04:00
GSCALAR ( pilot_speed_up , " PILOT_SPEED_UP " , PILOT_VELZ_MAX ) ,
2012-12-21 23:52:49 -04:00
2014-04-30 00:05:02 -03:00
// @Param: PILOT_ACCEL_Z
// @DisplayName: Pilot vertical acceleration
// @Description: The vertical acceleration used when pilot is controlling the altitude
// @Units: cm/s/s
// @Range: 50 500
// @Increment: 10
// @User: Standard
GSCALAR ( pilot_accel_z , " PILOT_ACCEL_Z " , PILOT_ACCEL_Z_DEFAULT ) ,
2012-12-10 10:38:43 -04:00
// @Param: FS_THR_ENABLE
2012-08-21 23:19:50 -03:00
// @DisplayName: Throttle Failsafe Enable
// @Description: The throttle failsafe allows you to configure a software failsafe activated by a setting on the throttle input channel
2021-08-16 04:17:22 -03:00
// @Values: 0:Disabled,1:Enabled always RTL,2:Enabled Continue with Mission in Auto Mode (Removed in 4.0+),3:Enabled always Land,4:Enabled always SmartRTL or RTL,5:Enabled always SmartRTL or Land,6:Enabled Auto DO_LAND_START or RTL
2012-08-21 23:19:50 -03:00
// @User: Standard
2017-04-24 05:07:27 -03:00
GSCALAR ( failsafe_throttle , " FS_THR_ENABLE " , FS_THR_ENABLED_ALWAYS_RTL ) ,
2012-07-05 03:33:40 -03:00
2012-12-10 10:38:43 -04:00
// @Param: FS_THR_VALUE
2012-08-21 23:19:50 -03:00
// @DisplayName: Throttle Failsafe Value
2017-05-15 20:16:12 -03:00
// @Description: The PWM level in microseconds on channel 3 below which throttle failsafe triggers
2020-09-21 00:50:24 -03:00
// @Range: 910 1100
2017-05-02 10:36:10 -03:00
// @Units: PWM
2013-06-18 03:56:39 -03:00
// @Increment: 1
2012-08-21 23:19:50 -03:00
// @User: Standard
2012-12-10 10:38:43 -04:00
GSCALAR ( failsafe_throttle_value , " FS_THR_VALUE " , FS_THR_VALUE_DEFAULT ) ,
2012-07-05 03:33:40 -03:00
2013-10-27 10:13:42 -03:00
// @Param: THR_DZ
// @DisplayName: Throttle deadzone
2017-05-15 20:16:12 -03:00
// @Description: The deadzone above and below mid throttle in PWM microseconds. Used in AltHold, Loiter, PosHold flight modes
2013-10-27 10:13:42 -03:00
// @User: Standard
// @Range: 0 300
2017-05-02 10:36:10 -03:00
// @Units: PWM
2013-10-27 10:13:42 -03:00
// @Increment: 1
GSCALAR ( throttle_deadzone , " THR_DZ " , THR_DZ_DEFAULT ) ,
2012-12-10 08:45:57 -04:00
// @Param: FLTMODE1
// @DisplayName: Flight Mode 1
2021-09-19 07:40:02 -03:00
// @Description: Flight mode when pwm of Flightmode channel(FLTMODE_CH) is <= 1230
2021-07-24 20:25:18 -03:00
// @Values: 0:Stabilize,1:Acro,2:AltHold,3:Auto,4:Guided,5:Loiter,6:RTL,7:Circle,9:Land,11:Drift,13:Sport,14:Flip,15:AutoTune,16:PosHold,17:Brake,18:Throw,19:Avoid_ADSB,20:Guided_NoGPS,21:Smart_RTL,22:FlowHold,23:Follow,24:ZigZag,25:SystemID,26:Heli_Autorotate,27:Auto RTL
2012-12-10 08:45:57 -04:00
// @User: Standard
2019-09-07 20:33:56 -03:00
GSCALAR ( flight_mode1 , " FLTMODE1 " , ( uint8_t ) FLIGHT_MODE_1 ) ,
2012-12-10 08:45:57 -04:00
// @Param: FLTMODE2
// @DisplayName: Flight Mode 2
2021-09-19 07:40:02 -03:00
// @Description: Flight mode when pwm of Flightmode channel(FLTMODE_CH) is >1230, <= 1360
2021-12-14 00:53:47 -04:00
// @CopyValuesFrom: FLTMODE1
2012-12-10 08:45:57 -04:00
// @User: Standard
2019-09-07 20:33:56 -03:00
GSCALAR ( flight_mode2 , " FLTMODE2 " , ( uint8_t ) FLIGHT_MODE_2 ) ,
2012-12-10 08:45:57 -04:00
// @Param: FLTMODE3
// @DisplayName: Flight Mode 3
2021-09-19 07:40:02 -03:00
// @Description: Flight mode when pwm of Flightmode channel(FLTMODE_CH) is >1360, <= 1490
2021-12-14 00:53:47 -04:00
// @CopyValuesFrom: FLTMODE1
2012-12-10 08:45:57 -04:00
// @User: Standard
2019-09-07 20:33:56 -03:00
GSCALAR ( flight_mode3 , " FLTMODE3 " , ( uint8_t ) FLIGHT_MODE_3 ) ,
2012-12-10 08:45:57 -04:00
// @Param: FLTMODE4
// @DisplayName: Flight Mode 4
2021-09-19 07:40:02 -03:00
// @Description: Flight mode when pwm of Flightmode channel(FLTMODE_CH) is >1490, <= 1620
2021-12-14 00:53:47 -04:00
// @CopyValuesFrom: FLTMODE1
2012-12-10 08:45:57 -04:00
// @User: Standard
2019-09-07 20:33:56 -03:00
GSCALAR ( flight_mode4 , " FLTMODE4 " , ( uint8_t ) FLIGHT_MODE_4 ) ,
2012-12-10 08:45:57 -04:00
// @Param: FLTMODE5
// @DisplayName: Flight Mode 5
2021-09-19 07:40:02 -03:00
// @Description: Flight mode when pwm of Flightmode channel(FLTMODE_CH) is >1620, <= 1749
2021-12-14 00:53:47 -04:00
// @CopyValuesFrom: FLTMODE1
2012-12-10 08:45:57 -04:00
// @User: Standard
2019-09-07 20:33:56 -03:00
GSCALAR ( flight_mode5 , " FLTMODE5 " , ( uint8_t ) FLIGHT_MODE_5 ) ,
2012-12-10 08:45:57 -04:00
// @Param: FLTMODE6
// @DisplayName: Flight Mode 6
2021-09-19 07:40:02 -03:00
// @Description: Flight mode when pwm of Flightmode channel(FLTMODE_CH) is >=1750
2021-12-14 00:53:47 -04:00
// @CopyValuesFrom: FLTMODE1
2012-12-10 08:45:57 -04:00
// @User: Standard
2019-09-07 20:33:56 -03:00
GSCALAR ( flight_mode6 , " FLTMODE6 " , ( uint8_t ) FLIGHT_MODE_6 ) ,
2012-12-10 08:45:57 -04:00
2017-04-10 05:39:10 -03:00
// @Param: FLTMODE_CH
// @DisplayName: Flightmode channel
// @Description: RC Channel to use for flight mode control
2021-03-22 10:03:50 -03:00
// @Values: 0:Disabled,5:Channel5,6:Channel6,7:Channel7,8:Channel8,9:Channel9,10:Channel 10,11:Channel 11,12:Channel 12,13:Channel 13,14:Channel 14,15:Channel 15
2017-04-10 05:39:10 -03:00
// @User: Advanced
GSCALAR ( flight_mode_chan , " FLTMODE_CH " , CH_MODE_DEFAULT ) ,
2020-11-02 13:46:01 -04:00
// @Param: INITIAL_MODE
// @DisplayName: Initial flight mode
// @Description: This selects the mode to start in on boot. This is useful for when you want to start in AUTO mode on boot without a receiver.
// @Values: 0:Stabilize,1:Acro,2:AltHold,3:Auto,4:Guided,5:Loiter,6:RTL,7:Circle,9:Land,11:Drift,13:Sport,14:Flip,15:AutoTune,16:PosHold,17:Brake,18:Throw,19:Avoid_ADSB,20:Guided_NoGPS,21:Smart_RTL,22:FlowHold,23:Follow,24:ZigZag,25:SystemID,26:Heli_Autorotate
// @User: Advanced
GSCALAR ( initial_mode , " INITIAL_MODE " , ( uint8_t ) Mode : : Number : : STABILIZE ) ,
2012-12-10 08:45:57 -04:00
// @Param: SIMPLE
// @DisplayName: Simple mode bitmask
2021-11-23 17:49:06 -04:00
// @Description: Bitmask which holds which flight modes use simple heading mode (eg bit 0 = 1 means Flight Mode 0 uses simple mode). The bitmask is for flightmode switch positions.
// @Bitmask: 0:SwitchPos1, 1:SwitchPos2, 2:SwitchPos3, 3:SwitchPos4, 4:SwitchPos5, 5:SwitchPos6
2012-12-10 08:45:57 -04:00
// @User: Advanced
2012-08-21 23:19:50 -03:00
GSCALAR ( simple_modes , " SIMPLE " , 0 ) ,
2012-02-12 07:26:36 -04:00
2012-07-05 03:33:40 -03:00
// @Param: LOG_BITMASK
2012-08-21 23:19:50 -03:00
// @DisplayName: Log bitmask
2014-10-16 21:37:49 -03:00
// @Description: 4 byte bitmap of log types to enable
2021-12-15 15:06:32 -04:00
// @Bitmask: 0:ATTITUDE_FAST,1:ATTITUDE_MED,2:GPS,3:PM,4:CTUN,5:NTUN,6:RCIN,7:IMU,8:CMD,9:CURRENT,10:RCOUT,11:OPTFLOW,12:PID,13:COMPASS,14:INAV,15:CAMERA,17:MOTBATT,18:IMU_FAST,19:IMU_RAW,20:VideoStabilization
2013-11-26 09:35:11 -04:00
// @User: Standard
2012-08-21 23:19:50 -03:00
GSCALAR ( log_bitmask , " LOG_BITMASK " , DEFAULT_LOG_BITMASK ) ,
2012-12-10 08:45:57 -04:00
2015-07-12 21:27:00 -03:00
// @Param: ESC_CALIBRATION
2012-12-10 08:45:57 -04:00
// @DisplayName: ESC Calibration
// @Description: Controls whether ArduCopter will enter ESC calibration on the next restart. Do not adjust this parameter manually.
// @User: Advanced
2016-08-30 23:53:53 -03:00
// @Values: 0:Normal Start-up, 1:Start-up in ESC Calibration mode if throttle high, 2:Start-up in ESC Calibration mode regardless of throttle, 3:Start-up and automatically calibrate ESCs, 9:Disabled
2015-07-12 21:27:00 -03:00
GSCALAR ( esc_calibrate , " ESC_CALIBRATION " , 0 ) ,
2012-12-10 08:45:57 -04:00
// @Param: TUNE
// @DisplayName: Channel 6 Tuning
// @Description: Controls which parameters (normally PID gains) are being tuned with transmitter's channel 6 knob
// @User: Standard
2021-09-17 02:54:19 -03:00
// @Values: 0:None,1:Stab Roll/Pitch kP,4:Rate Roll/Pitch kP,5:Rate Roll/Pitch kI,21:Rate Roll/Pitch kD,3:Stab Yaw kP,6:Rate Yaw kP,26:Rate Yaw kD,56:Rate Yaw Filter,55:Motor Yaw Headroom,14:AltHold kP,7:Throttle Rate kP,34:Throttle Accel kP,35:Throttle Accel kI,36:Throttle Accel kD,12:Loiter Pos kP,22:Velocity XY kP,28:Velocity XY kI,10:WP Speed,25:Acro Roll/Pitch deg/s,40:Acro Yaw deg/s,45:RC Feel,13:Heli Ext Gyro,38:Declination,39:Circle Rate,46:Rate Pitch kP,47:Rate Pitch kI,48:Rate Pitch kD,49:Rate Roll kP,50:Rate Roll kI,51:Rate Roll kD,52:Rate Pitch FF,53:Rate Roll FF,54:Rate Yaw FF,58:SysID Magnitude
2012-08-21 23:19:50 -03:00
GSCALAR ( radio_tuning , " TUNE " , 0 ) ,
2012-12-10 08:45:57 -04:00
2016-12-14 21:26:36 -04:00
// @Param: FRAME_TYPE
// @DisplayName: Frame Type (+, X, V, etc)
2013-01-14 02:49:26 -04:00
// @Description: Controls motor mixing for multicopters. Not used for Tri or Traditional Helicopters.
2021-11-02 21:15:44 -03:00
// @Values: 0:Plus, 1:X, 2:V, 3:H, 4:V-Tail, 5:A-Tail, 10:Y6B, 11:Y6F, 12:BetaFlightX, 13:DJIX, 14:ClockwiseX, 15: I, 18: BetaFlightXReversed, 19:Y4
2012-12-10 08:45:57 -04:00
// @User: Standard
2017-05-12 10:35:23 -03:00
// @RebootRequired: True
2019-02-04 19:53:34 -04:00
GSCALAR ( frame_type , " FRAME_TYPE " , HAL_FRAME_TYPE_DEFAULT ) ,
2012-12-06 04:40:36 -04:00
2017-01-09 03:45:48 -04:00
// @Group: ARMING_
// @Path: ../libraries/AP_Arming/AP_Arming.cpp
GOBJECT ( arming , " ARMING_ " , AP_Arming_Copter ) ,
2013-05-20 02:48:04 -03:00
2015-08-30 22:44:08 -03:00
// @Param: DISARM_DELAY
// @DisplayName: Disarm delay
// @Description: Delay before automatic disarm in seconds. A value of zero disables auto disarm.
2017-05-02 10:36:10 -03:00
// @Units: s
2015-08-30 22:44:08 -03:00
// @Range: 0 127
// @User: Advanced
GSCALAR ( disarm_delay , " DISARM_DELAY " , AUTO_DISARMING_DELAY ) ,
2013-08-11 00:51:08 -03:00
// @Param: ANGLE_MAX
// @DisplayName: Angle Max
// @Description: Maximum lean angle in all flight modes
2017-05-02 10:36:10 -03:00
// @Units: cdeg
2021-05-20 10:08:46 -03:00
// @Increment: 10
2015-08-13 14:35:32 -03:00
// @Range: 1000 8000
2013-08-11 00:51:08 -03:00
// @User: Advanced
2013-10-18 05:03:31 -03:00
ASCALAR ( angle_max , " ANGLE_MAX " , DEFAULT_ANGLE_MAX ) ,
2013-08-11 00:51:08 -03:00
2021-01-06 09:00:44 -04:00
# if MODE_POSHOLD_ENABLED == ENABLED
2014-07-11 02:08:09 -03:00
// @Param: PHLD_BRAKE_RATE
// @DisplayName: PosHold braking rate
// @Description: PosHold flight mode's rotation rate during braking in deg/sec
2017-05-02 10:36:10 -03:00
// @Units: deg/s
2014-04-23 00:35:45 -03:00
// @Range: 4 12
2014-04-11 05:15:09 -03:00
// @User: Advanced
2014-07-11 02:08:09 -03:00
GSCALAR ( poshold_brake_rate , " PHLD_BRAKE_RATE " , POSHOLD_BRAKE_RATE_DEFAULT ) ,
2014-04-11 05:15:09 -03:00
2014-07-11 02:08:09 -03:00
// @Param: PHLD_BRAKE_ANGLE
// @DisplayName: PosHold braking angle max
// @Description: PosHold flight mode's max lean angle during braking in centi-degrees
2017-05-02 10:36:10 -03:00
// @Units: cdeg
2021-05-20 10:08:46 -03:00
// @Increment: 10
2014-04-23 00:35:45 -03:00
// @Range: 2000 4500
2014-04-11 05:15:09 -03:00
// @User: Advanced
2014-07-11 02:08:09 -03:00
GSCALAR ( poshold_brake_angle_max , " PHLD_BRAKE_ANGLE " , POSHOLD_BRAKE_ANGLE_DEFAULT ) ,
2021-01-06 09:00:44 -04:00
# endif
2014-04-11 05:15:09 -03:00
2014-07-06 06:05:43 -03:00
// @Param: LAND_REPOSITION
// @DisplayName: Land repositioning
// @Description: Enables user input during LAND mode, the landing phase of RTL, and auto mode landings.
2014-09-09 16:34:59 -03:00
// @Values: 0:No repositioning, 1:Repositioning
2014-07-06 06:05:43 -03:00
// @User: Advanced
GSCALAR ( land_repositioning , " LAND_REPOSITION " , LAND_REPOSITION_DEFAULT ) ,
2015-06-09 23:39:06 -03:00
// @Param: FS_EKF_ACTION
// @DisplayName: EKF Failsafe Action
// @Description: Controls the action that will be taken when an EKF failsafe is invoked
// @Values: 1:Land, 2:AltHold, 3:Land even in Stabilize
// @User: Advanced
GSCALAR ( fs_ekf_action , " FS_EKF_ACTION " , FS_EKF_ACTION_DEFAULT ) ,
2015-06-09 22:16:52 -03:00
// @Param: FS_EKF_THRESH
// @DisplayName: EKF failsafe variance threshold
// @Description: Allows setting the maximum acceptable compass and velocity variance
// @Values: 0.6:Strict, 0.8:Default, 1.0:Relaxed
2014-07-21 07:07:15 -03:00
// @User: Advanced
2015-06-09 22:16:52 -03:00
GSCALAR ( fs_ekf_thresh , " FS_EKF_THRESH " , FS_EKF_THRESHOLD_DEFAULT ) ,
2014-07-21 07:07:15 -03:00
2015-08-30 23:15:46 -03:00
// @Param: FS_CRASH_CHECK
// @DisplayName: Crash check enable
// @Description: This enables automatic crash checking. When enabled the motors will disarm if a crash is detected.
// @Values: 0:Disabled, 1:Enabled
// @User: Advanced
GSCALAR ( fs_crash_check , " FS_CRASH_CHECK " , 1 ) ,
2013-11-09 01:25:06 -04:00
2012-08-21 23:19:50 -03:00
// @Param: RC_SPEED
// @DisplayName: ESC Update Speed
// @Description: This is the speed in Hertz that your ESCs will receive updates
2013-05-21 04:31:16 -03:00
// @Units: Hz
// @Range: 50 490
// @Increment: 1
2012-08-21 23:19:50 -03:00
// @User: Advanced
GSCALAR ( rc_speed , " RC_SPEED " , RC_FAST_SPEED ) ,
2013-08-04 08:22:12 -03:00
// @Param: ACRO_RP_P
// @DisplayName: Acro Roll and Pitch P gain
// @Description: Converts pilot roll and pitch into a desired rate of rotation in ACRO and SPORT mode. Higher values mean faster rate of rotation.
2012-12-10 08:45:57 -04:00
// @Range: 1 10
// @User: Standard
2013-08-04 08:22:12 -03:00
// @Param: ACRO_YAW_P
// @DisplayName: Acro Yaw P gain
2019-03-05 08:09:49 -04:00
// @Description: Converts pilot yaw input into a desired rate of rotation. Higher values mean faster rate of rotation.
2013-08-04 08:22:12 -03:00
// @Range: 1 10
// @User: Standard
2012-12-10 08:45:57 -04:00
2018-03-19 08:40:33 -03:00
# if MODE_ACRO_ENABLED == ENABLED || MODE_SPORT_ENABLED == ENABLED
2012-10-23 09:30:50 -03:00
// @Param: ACRO_BAL_ROLL
// @DisplayName: Acro Balance Roll
2019-03-24 15:40:27 -03:00
// @Description: rate at which roll angle returns to level in acro and sport mode. A higher value causes the vehicle to return to level faster. For helicopter sets the decay rate of the virtual flybar in the roll axis. A higher value causes faster decay of desired to actual attitude.
2013-08-04 06:14:07 -03:00
// @Range: 0 3
// @Increment: 0.1
2012-10-23 09:30:50 -03:00
// @User: Advanced
GSCALAR ( acro_balance_roll , " ACRO_BAL_ROLL " , ACRO_BALANCE_ROLL ) ,
// @Param: ACRO_BAL_PITCH
// @DisplayName: Acro Balance Pitch
2019-03-24 15:40:27 -03:00
// @Description: rate at which pitch angle returns to level in acro and sport mode. A higher value causes the vehicle to return to level faster. For helicopter sets the decay rate of the virtual flybar in the pitch axis. A higher value causes faster decay of desired to actual attitude.
2013-08-04 06:14:07 -03:00
// @Range: 0 3
// @Increment: 0.1
2012-10-23 09:30:50 -03:00
// @User: Advanced
GSCALAR ( acro_balance_pitch , " ACRO_BAL_PITCH " , ACRO_BALANCE_PITCH ) ,
2018-03-19 08:40:33 -03:00
# endif
2012-10-23 09:30:50 -03:00
2018-03-19 08:40:33 -03:00
# if MODE_ACRO_ENABLED == ENABLED
2012-12-10 09:27:46 -04:00
// @Param: ACRO_TRAINER
2013-08-04 06:14:07 -03:00
// @DisplayName: Acro Trainer
// @Description: Type of trainer used in acro mode
// @Values: 0:Disabled,1:Leveling,2:Leveling and Limited
2012-12-10 09:27:46 -04:00
// @User: Advanced
2019-10-25 03:06:05 -03:00
GSCALAR ( acro_trainer , " ACRO_TRAINER " , ( uint8_t ) ModeAcro : : Trainer : : LIMITED ) ,
2012-12-10 09:27:46 -04:00
2016-06-22 01:16:28 -03:00
// @Param: ACRO_RP_EXPO
// @DisplayName: Acro Roll/Pitch Expo
2014-08-12 23:25:59 -03:00
// @Description: Acro roll/pitch Expo to allow faster rotation when stick at edges
2014-08-19 00:51:27 -03:00
// @Values: 0:Disabled,0.1:Very Low,0.2:Low,0.3:Medium,0.4:High,0.5:Very High
2021-09-17 02:54:19 -03:00
// @Range: -0.5 0.95
2014-08-12 23:25:59 -03:00
// @User: Advanced
2016-06-22 01:16:28 -03:00
GSCALAR ( acro_rp_expo , " ACRO_RP_EXPO " , ACRO_RP_EXPO_DEFAULT ) ,
2018-03-19 08:40:33 -03:00
# endif
2014-08-12 23:25:59 -03:00
2012-08-21 23:19:50 -03:00
// variables not in the g class which contain EEPROM saved variables
2012-12-22 04:26:27 -04:00
# if CAMERA == ENABLED
// @Group: CAM_
// @Path: ../libraries/AP_Camera/AP_Camera.cpp
GOBJECT ( camera , " CAM_ " , AP_Camera ) ,
# endif
2013-06-24 23:46:53 -03:00
// @Group: RELAY_
// @Path: ../libraries/AP_Relay/AP_Relay.cpp
GOBJECT ( relay , " RELAY_ " , AP_Relay ) ,
2014-04-02 12:19:54 -03:00
# if PARACHUTE == ENABLED
2020-04-23 01:14:18 -03:00
// @Group: CHUTE_
2014-04-02 12:19:54 -03:00
// @Path: ../libraries/AP_Parachute/AP_Parachute.cpp
2020-04-23 01:14:18 -03:00
GOBJECT ( parachute , " CHUTE_ " , AP_Parachute ) ,
2014-04-02 12:19:54 -03:00
# endif
2021-02-06 23:29:33 -04:00
# if LANDING_GEAR_ENABLED == ENABLED
2015-01-06 00:24:50 -04:00
// @Group: LGR_
// @Path: ../libraries/AP_LandingGear/AP_LandingGear.cpp
2015-01-06 22:53:21 -04:00
GOBJECT ( landinggear , " LGR_ " , AP_LandingGear ) ,
2021-02-06 23:29:33 -04:00
# endif
2015-01-06 00:24:50 -04:00
2015-10-12 11:27:26 -03:00
# if FRAME_CONFIG == HELI_FRAME
// @Group: IM_
2015-11-12 22:49:25 -04:00
// @Path: ../libraries/AC_InputManager/AC_InputManager_Heli.cpp
2015-10-12 11:27:26 -03:00
GOBJECT ( input_manager , " IM_ " , AC_InputManager_Heli ) ,
# endif
2021-12-04 00:22:56 -04:00
// @Group: COMPASS_
2016-03-15 11:16:23 -03:00
// @Path: ../libraries/AP_Compass/AP_Compass.cpp
2021-12-04 00:22:56 -04:00
GOBJECT ( compass , " COMPASS_ " , Compass ) ,
2012-08-21 23:19:50 -03:00
// @Group: INS_
2012-11-05 00:32:38 -04:00
// @Path: ../libraries/AP_InertialSensor/AP_InertialSensor.cpp
GOBJECT ( ins , " INS_ " , AP_InertialSensor ) ,
2012-07-19 02:56:13 -03:00
2013-07-18 01:58:24 -03:00
// @Group: WPNAV_
// @Path: ../libraries/AC_WPNav/AC_WPNav.cpp
2017-01-09 05:54:18 -04:00
GOBJECTPTR ( wp_nav , " WPNAV_ " , AC_WPNav ) ,
2013-04-05 06:32:36 -03:00
2018-03-27 23:13:37 -03:00
// @Group: LOIT_
// @Path: ../libraries/AC_WPNav/AC_Loiter.cpp
GOBJECTPTR ( loiter_nav , " LOIT_ " , AC_Loiter ) ,
2018-02-23 05:51:17 -04:00
# if MODE_CIRCLE_ENABLED == ENABLED
2014-04-24 20:53:03 -03:00
// @Group: CIRCLE_
2014-01-27 01:09:29 -04:00
// @Path: ../libraries/AC_WPNav/AC_Circle.cpp
2017-01-09 05:54:18 -04:00
GOBJECTPTR ( circle_nav , " CIRCLE_ " , AC_Circle ) ,
2018-02-23 05:51:17 -04:00
# endif
2014-01-27 01:09:29 -04:00
2014-04-24 20:53:03 -03:00
// @Group: ATC_
2017-02-06 00:34:18 -04:00
// @Path: ../libraries/AC_AttitudeControl/AC_AttitudeControl.cpp,../libraries/AC_AttitudeControl/AC_AttitudeControl_Multi.cpp,../libraries/AC_AttitudeControl/AC_AttitudeControl_Heli.cpp
2017-01-09 06:10:32 -04:00
# if FRAME_CONFIG == HELI_FRAME
GOBJECTPTR ( attitude_control , " ATC_ " , AC_AttitudeControl_Heli ) ,
# else
2017-01-09 05:54:18 -04:00
GOBJECTPTR ( attitude_control , " ATC_ " , AC_AttitudeControl_Multi ) ,
2017-01-09 06:10:32 -04:00
# endif
2017-03-01 01:58:00 -04:00
// @Group: PSC
2014-01-10 10:29:55 -04:00
// @Path: ../libraries/AC_AttitudeControl/AC_PosControl.cpp
2017-01-09 05:54:18 -04:00
GOBJECTPTR ( pos_control , " PSC " , AC_PosControl ) ,
2014-01-10 10:29:55 -04:00
2013-01-02 10:36:48 -04:00
// @Group: SR0_
2015-06-15 20:59:39 -03:00
// @Path: GCS_Mavlink.cpp
2019-06-18 07:38:00 -03:00
GOBJECTN ( _gcs . chan_parameters [ 0 ] , gcs0 , " SR0_ " , GCS_MAVLINK_Parameters ) ,
2013-01-02 10:36:48 -04:00
2020-12-22 15:43:42 -04:00
# if MAVLINK_COMM_NUM_BUFFERS >= 2
2013-11-23 06:45:42 -04:00
// @Group: SR1_
2015-06-15 20:59:39 -03:00
// @Path: GCS_Mavlink.cpp
2019-06-18 07:38:00 -03:00
GOBJECTN ( _gcs . chan_parameters [ 1 ] , gcs1 , " SR1_ " , GCS_MAVLINK_Parameters ) ,
2020-12-22 15:43:42 -04:00
# endif
2013-11-23 06:45:42 -04:00
2020-12-22 15:43:42 -04:00
# if MAVLINK_COMM_NUM_BUFFERS >= 3
2013-11-23 06:45:42 -04:00
// @Group: SR2_
2015-06-15 20:59:39 -03:00
// @Path: GCS_Mavlink.cpp
2019-06-18 07:38:00 -03:00
GOBJECTN ( _gcs . chan_parameters [ 2 ] , gcs2 , " SR2_ " , GCS_MAVLINK_Parameters ) ,
2020-12-22 15:43:42 -04:00
# endif
2012-04-25 13:23:46 -03:00
2020-12-22 15:43:42 -04:00
# if MAVLINK_COMM_NUM_BUFFERS >= 4
2015-05-15 01:24:18 -03:00
// @Group: SR3_
2015-06-15 20:59:39 -03:00
// @Path: GCS_Mavlink.cpp
2019-06-18 07:38:00 -03:00
GOBJECTN ( _gcs . chan_parameters [ 3 ] , gcs3 , " SR3_ " , GCS_MAVLINK_Parameters ) ,
2020-12-22 15:43:42 -04:00
# endif
# if MAVLINK_COMM_NUM_BUFFERS >= 5
// @Group: SR4_
// @Path: GCS_Mavlink.cpp
GOBJECTN ( _gcs . chan_parameters [ 4 ] , gcs4 , " SR4_ " , GCS_MAVLINK_Parameters ) ,
# endif
# if MAVLINK_COMM_NUM_BUFFERS >= 6
// @Group: SR5_
// @Path: GCS_Mavlink.cpp
GOBJECTN ( _gcs . chan_parameters [ 5 ] , gcs5 , " SR5_ " , GCS_MAVLINK_Parameters ) ,
# endif
# if MAVLINK_COMM_NUM_BUFFERS >= 7
// @Group: SR6_
// @Path: GCS_Mavlink.cpp
GOBJECTN ( _gcs . chan_parameters [ 6 ] , gcs6 , " SR6_ " , GCS_MAVLINK_Parameters ) ,
# endif
2015-05-15 01:24:18 -03:00
2012-08-21 23:19:50 -03:00
// @Group: AHRS_
// @Path: ../libraries/AP_AHRS/AP_AHRS.cpp
GOBJECT ( ahrs , " AHRS_ " , AP_AHRS ) ,
2012-04-04 10:55:07 -03:00
2020-07-24 14:02:40 -03:00
# if HAL_MOUNT_ENABLED
2015-04-28 21:07:36 -03:00
// @Group: MNT
2012-08-21 23:19:50 -03:00
// @Path: ../libraries/AP_Mount/AP_Mount.cpp
2015-01-12 08:12:15 -04:00
GOBJECT ( camera_mount , " MNT " , AP_Mount ) ,
2012-07-15 04:36:05 -03:00
# endif
2015-11-09 18:14:31 -04:00
// @Group: LOG
2019-01-18 00:23:42 -04:00
// @Path: ../libraries/AP_Logger/AP_Logger.cpp
GOBJECT ( logger , " LOG " , AP_Logger ) ,
2015-11-09 18:14:31 -04:00
2015-08-25 23:14:58 -03:00
// @Group: BATT
2013-10-01 10:34:44 -03:00
// @Path: ../libraries/AP_BattMonitor/AP_BattMonitor.cpp
2014-12-01 00:29:39 -04:00
GOBJECT ( battery , " BATT " , AP_BattMonitor ) ,
2013-10-01 10:34:44 -03:00
2014-01-19 21:58:12 -04:00
// @Group: BRD_
// @Path: ../libraries/AP_BoardConfig/AP_BoardConfig.cpp
2014-08-18 02:25:37 -03:00
GOBJECT ( BoardConfig , " BRD_ " , AP_BoardConfig ) ,
2014-01-19 21:58:12 -04:00
2020-05-31 08:47:48 -03:00
# if HAL_MAX_CAN_PROTOCOL_DRIVERS
2017-05-06 06:11:50 -03:00
// @Group: CAN_
2020-05-31 08:47:48 -03:00
// @Path: ../libraries/AP_CANManager/AP_CANManager.cpp
GOBJECT ( can_mgr , " CAN_ " , AP_CANManager ) ,
2017-05-06 06:11:50 -03:00
# endif
2018-04-13 23:16:11 -03:00
# if SPRAYER_ENABLED == ENABLED
2014-04-24 20:53:03 -03:00
// @Group: SPRAY_
2013-08-04 11:20:21 -03:00
// @Path: ../libraries/AC_Sprayer/AC_Sprayer.cpp
GOBJECT ( sprayer , " SPRAY_ " , AC_Sprayer ) ,
# endif
2021-10-26 02:31:21 -03:00
# if AP_SIM_ENABLED
2021-04-07 01:50:58 -03:00
// @Group: SIM_
// @Path: ../libraries/SITL/SITL.cpp
2021-07-30 07:09:18 -03:00
GOBJECT ( sitl , " SIM_ " , SITL : : SIM ) ,
2012-08-21 23:19:50 -03:00
# endif
2020-12-03 04:13:33 -04:00
// @Group: BARO
2013-05-21 02:22:11 -03:00
// @Path: ../libraries/AP_Baro/AP_Baro.cpp
2020-12-03 04:13:33 -04:00
GOBJECT ( barometer , " BARO " , AP_Baro ) ,
2013-05-21 02:22:11 -03:00
2014-03-31 16:18:16 -03:00
// GPS driver
2020-12-30 11:01:14 -04:00
// @Group: GPS
2014-03-31 16:18:16 -03:00
// @Path: ../libraries/AP_GPS/AP_GPS.cpp
2020-12-30 11:01:14 -04:00
GOBJECT ( gps , " GPS " , AP_GPS ) ,
2014-03-31 16:18:16 -03:00
2013-05-21 02:22:11 -03:00
// @Group: SCHED_
// @Path: ../libraries/AP_Scheduler/AP_Scheduler.cpp
2013-01-11 21:01:10 -04:00
GOBJECT ( scheduler , " SCHED_ " , AP_Scheduler ) ,
2012-12-18 06:15:11 -04:00
2013-04-26 06:51:07 -03:00
# if AC_FENCE == ENABLED
2013-07-18 01:58:24 -03:00
// @Group: FENCE_
// @Path: ../libraries/AC_Fence/AC_Fence.cpp
2013-04-26 06:51:07 -03:00
GOBJECT ( fence , " FENCE_ " , AC_Fence ) ,
2012-12-13 03:07:34 -04:00
# endif
2012-08-21 23:19:50 -03:00
2016-06-20 05:27:14 -03:00
// @Group: AVOID_
// @Path: ../libraries/AC_Avoidance/AC_Avoid.cpp
2017-01-02 20:36:26 -04:00
# if AC_AVOID_ENABLED == ENABLED
2016-06-20 05:27:14 -03:00
GOBJECT ( avoid , " AVOID_ " , AC_Avoid ) ,
2017-01-02 20:36:26 -04:00
# endif
2016-06-20 05:27:14 -03:00
2014-04-06 22:18:43 -03:00
# if AC_RALLY == ENABLED
// @Group: RALLY_
2016-07-19 19:52:56 -03:00
// @Path: AP_Rally.cpp,../libraries/AP_Rally/AP_Rally.cpp
GOBJECT ( rally , " RALLY_ " , AP_Rally_Copter ) ,
2014-04-06 22:18:43 -03:00
# endif
2016-12-12 08:36:38 -04:00
# if FRAME_CONFIG == HELI_FRAME
2012-08-21 23:19:50 -03:00
// @Group: H_
2017-03-14 06:47:18 -03:00
// @Path: ../libraries/AP_Motors/AP_MotorsHeli_Single.cpp,../libraries/AP_Motors/AP_MotorsHeli_Dual.cpp,../libraries/AP_Motors/AP_MotorsHeli.cpp
GOBJECTVARPTR ( motors , " H_ " , & copter . motors_var_info ) ,
2012-08-21 23:19:50 -03:00
# else
2013-01-02 04:05:57 -04:00
// @Group: MOT_
2015-08-25 23:14:58 -03:00
// @Path: ../libraries/AP_Motors/AP_MotorsMulticopter.cpp
2017-03-14 06:47:18 -03:00
GOBJECTVARPTR ( motors , " MOT_ " , & copter . motors_var_info ) ,
2012-06-29 02:10:35 -03:00
# endif
2013-03-24 23:48:06 -03:00
// @Group: RCMAP_
// @Path: ../libraries/AP_RCMapper/AP_RCMapper.cpp
GOBJECT ( rcmap , " RCMAP_ " , RCMapper ) ,
2019-12-12 03:30:16 -04:00
# if HAL_NAVEKF2_AVAILABLE
2015-09-21 02:28:04 -03:00
// @Group: EK2_
// @Path: ../libraries/AP_NavEKF2/AP_NavEKF2.cpp
2019-12-10 05:30:36 -04:00
GOBJECTN ( ahrs . EKF2 , NavEKF2 , " EK2_ " , NavEKF2 ) ,
2019-12-12 03:30:16 -04:00
# endif
# if HAL_NAVEKF3_AVAILABLE
2016-07-14 02:08:43 -03:00
// @Group: EK3_
// @Path: ../libraries/AP_NavEKF3/AP_NavEKF3.cpp
2019-12-10 05:30:36 -04:00
GOBJECTN ( ahrs . EKF3 , NavEKF3 , " EK3_ " , NavEKF3 ) ,
2019-12-12 03:30:16 -04:00
# endif
2016-07-14 02:08:43 -03:00
2018-02-21 22:06:07 -04:00
# if MODE_AUTO_ENABLED == ENABLED
2014-02-27 21:15:40 -04:00
// @Group: MIS_
// @Path: ../libraries/AP_Mission/AP_Mission.cpp
2018-12-11 13:11:49 -04:00
GOBJECTN ( mode_auto . mission , mission , " MIS_ " , AP_Mission ) ,
2018-02-21 22:06:07 -04:00
# endif
2014-02-27 21:15:40 -04:00
2015-08-28 03:00:55 -03:00
// @Group: RSSI_
// @Path: ../libraries/AP_RSSI/AP_RSSI.cpp
2017-05-25 05:53:20 -03:00
GOBJECT ( rssi , " RSSI_ " , AP_RSSI ) ,
2015-08-28 03:00:55 -03:00
2016-04-27 07:55:35 -03:00
# if RANGEFINDER_ENABLED == ENABLED
2014-07-16 16:15:31 -03:00
// @Group: RNGFND
2019-11-11 02:42:10 -04:00
// @Path: ../libraries/AP_RangeFinder/AP_RangeFinder.cpp
2016-04-27 08:37:04 -03:00
GOBJECT ( rangefinder , " RNGFND " , RangeFinder ) ,
2014-06-27 01:23:56 -03:00
# endif
2021-02-12 23:40:10 -04:00
# if AP_TERRAIN_AVAILABLE
2014-07-25 00:12:10 -03:00
// @Group: TERRAIN_
2014-07-22 05:22:36 -03:00
// @Path: ../libraries/AP_Terrain/AP_Terrain.cpp
GOBJECT ( terrain , " TERRAIN_ " , AP_Terrain ) ,
# endif
2021-12-24 01:47:22 -04:00
# if AP_OPTICALFLOW_ENABLED
2014-07-11 23:32:00 -03:00
// @Group: FLOW
2021-12-23 23:59:00 -04:00
// @Path: ../libraries/AP_OpticalFlow/AP_OpticalFlow.cpp
2014-07-11 23:32:00 -03:00
GOBJECT ( optflow , " FLOW " , OpticalFlow ) ,
# endif
2015-02-16 00:39:18 -04:00
# if PRECISION_LANDING == ENABLED
2016-01-06 23:55:44 -04:00
// @Group: PLND_
2015-02-16 00:39:18 -04:00
// @Path: ../libraries/AC_PrecLand/AC_PrecLand.cpp
2015-12-31 02:27:52 -04:00
GOBJECT ( precland , " PLND_ " , AC_PrecLand ) ,
2015-02-16 00:39:18 -04:00
# endif
2018-03-29 10:49:27 -03:00
# if RPM_ENABLED == ENABLED
2015-08-07 02:34:56 -03:00
// @Group: RPM
// @Path: ../libraries/AP_RPM/AP_RPM.cpp
GOBJECT ( rpm_sensor , " RPM " , AP_RPM ) ,
2018-03-29 10:49:27 -03:00
# endif
2015-08-07 02:34:56 -03:00
2020-09-19 05:37:52 -03:00
# if HAL_ADSB_ENABLED
2015-11-25 19:22:21 -04:00
// @Group: ADSB_
// @Path: ../libraries/AP_ADSB/AP_ADSB.cpp
GOBJECT ( adsb , " ADSB_ " , AP_ADSB ) ,
2016-07-21 09:44:09 -03:00
// @Group: AVD_
// @Path: ../libraries/AP_Avoidance/AP_Avoidance.cpp
GOBJECT ( avoidance_adsb , " AVD_ " , AP_Avoidance_Copter ) ,
2018-02-16 10:21:55 -04:00
# endif
2016-07-21 09:44:09 -03:00
2015-12-03 16:48:03 -04:00
// @Group: NTF_
// @Path: ../libraries/AP_Notify/AP_Notify.cpp
GOBJECT ( notify , " NTF_ " , AP_Notify ) ,
2018-03-14 17:16:16 -03:00
# if MODE_THROW_ENABLED == ENABLED
2015-12-18 05:46:56 -04:00
// @Param: THROW_MOT_START
// @DisplayName: Start motors before throwing is detected
2020-05-01 22:32:11 -03:00
// @Description: Used by Throw mode. Controls whether motors will run at the speed set by MOT_SPIN_MIN or will be stopped when armed and waiting for the throw.
2015-12-18 05:46:56 -04:00
// @Values: 0:Stopped,1:Running
// @User: Standard
2020-12-05 03:18:28 -04:00
GSCALAR ( throw_motor_start , " THROW_MOT_START " , ( float ) ModeThrow : : PreThrowMotorState : : STOPPED ) ,
2018-03-14 17:16:16 -03:00
# endif
2015-12-18 05:46:56 -04:00
2020-10-19 17:31:18 -03:00
# if OSD_ENABLED || OSD_PARAM_ENABLED
2018-06-23 04:34:25 -03:00
// @Group: OSD
// @Path: ../libraries/AP_OSD/AP_OSD.cpp
GOBJECT ( osd , " OSD " , AP_OSD ) ,
# endif
2019-11-28 16:21:07 -04:00
2017-05-25 05:53:20 -03:00
// @Group:
2016-06-04 23:37:55 -03:00
// @Path: Parameters.cpp
GOBJECT ( g2 , " " , ParametersG2 ) ,
2017-08-19 00:37:19 -03:00
2019-11-10 16:13:17 -04:00
// @Group:
// @Path: ../libraries/AP_Vehicle/AP_Vehicle.cpp
{ AP_PARAM_GROUP , " " , Parameters : : k_param_vehicle , ( const void * ) & copter , { group_info : AP_Vehicle : : var_info } } ,
2012-08-21 23:19:50 -03:00
AP_VAREND
2012-02-12 07:26:36 -04:00
} ;
2016-06-04 23:37:55 -03:00
/*
2 nd group of parameters
*/
const AP_Param : : GroupInfo ParametersG2 : : var_info [ ] = {
2016-08-15 00:57:38 -03:00
// @Param: WP_NAVALT_MIN
// @DisplayName: Minimum navigation altitude
// @Description: This is the altitude in meters above which for navigation can begin. This applies in auto takeoff and auto landing.
2016-06-04 23:37:55 -03:00
// @Range: 0 5
// @User: Standard
2016-08-15 00:57:38 -03:00
AP_GROUPINFO ( " WP_NAVALT_MIN " , 1 , ParametersG2 , wp_navalt_min , 0 ) ,
2016-06-04 23:37:55 -03:00
2021-08-12 00:38:21 -03:00
# if HAL_BUTTON_ENABLED
2016-07-21 22:24:13 -03:00
// @Group: BTN_
// @Path: ../libraries/AP_Button/AP_Button.cpp
2019-11-27 18:34:07 -04:00
AP_SUBGROUPPTR ( button_ptr , " BTN_ " , 2 , ParametersG2 , AP_Button ) ,
2019-10-06 10:59:15 -03:00
# endif
2016-08-01 09:42:09 -03:00
2018-03-14 17:16:16 -03:00
# if MODE_THROW_ENABLED == ENABLED
2016-08-01 09:42:09 -03:00
// @Param: THROW_NEXTMODE
// @DisplayName: Throw mode's follow up mode
// @Description: Vehicle will switch to this mode after the throw is successfully completed. Default is to stay in throw mode (18)
2017-08-25 22:47:14 -03:00
// @Values: 3:Auto,4:Guided,5:LOITER,6:RTL,9:Land,17:Brake,18:Throw
2016-08-01 09:42:09 -03:00
// @User: Standard
AP_GROUPINFO ( " THROW_NEXTMODE " , 3 , ParametersG2 , throw_nextmode , 18 ) ,
2016-08-01 23:26:48 -03:00
// @Param: THROW_TYPE
// @DisplayName: Type of Type
2020-05-01 22:32:11 -03:00
// @Description: Used by Throw mode. Specifies whether Copter is thrown upward or dropped.
2016-08-01 23:26:48 -03:00
// @Values: 0:Upward Throw,1:Drop
// @User: Standard
2020-12-05 03:10:00 -04:00
AP_GROUPINFO ( " THROW_TYPE " , 4 , ParametersG2 , throw_type , ( float ) ModeThrow : : ThrowType : : Upward ) ,
2018-03-14 17:16:16 -03:00
# endif
2016-08-01 23:26:48 -03:00
2016-08-08 05:16:36 -03:00
// @Param: GND_EFFECT_COMP
// @DisplayName: Ground Effect Compensation Enable/Disable
// @Description: Ground Effect Compensation Enable/Disable
// @Values: 0:Disabled,1:Enabled
// @User: Advanced
2018-11-11 22:20:35 -04:00
AP_GROUPINFO ( " GND_EFFECT_COMP " , 5 , ParametersG2 , gndeffect_comp_enabled , 1 ) ,
2016-08-08 05:16:36 -03:00
2016-08-16 07:23:27 -03:00
# if ADVANCED_FAILSAFE == ENABLED
// @Group: AFS_
// @Path: ../libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp
AP_SUBGROUPINFO ( afs , " AFS_ " , 6 , ParametersG2 , AP_AdvancedFailsafe ) ,
# endif
2016-09-12 03:23:53 -03:00
// @Param: DEV_OPTIONS
// @DisplayName: Development options
// @Description: Bitmask of developer options. The meanings of the bit fields in this parameter may vary at any time. Developers should check the source code for current meaning
2021-04-15 01:14:12 -03:00
// @Bitmask: 0:ADSBMavlinkProcessing,1:DevOptionVFR_HUDRelativeAlt
2016-09-12 03:23:53 -03:00
// @User: Advanced
AP_GROUPINFO ( " DEV_OPTIONS " , 7 , ParametersG2 , dev_options , 0 ) ,
2016-10-14 02:02:29 -03:00
2018-02-27 08:48:59 -04:00
# if BEACON_ENABLED == ENABLED
2017-01-02 20:36:26 -04:00
// @Group: BCN
// @Path: ../libraries/AP_Beacon/AP_Beacon.cpp
AP_SUBGROUPINFO ( beacon , " BCN " , 14 , ParametersG2 , AP_Beacon ) ,
2018-02-22 00:53:20 -04:00
# endif
2017-01-02 20:36:26 -04:00
2021-03-25 05:08:44 -03:00
# if HAL_PROXIMITY_ENABLED
2016-10-19 05:24:20 -03:00
// @Group: PRX
2016-10-14 02:02:29 -03:00
// @Path: ../libraries/AP_Proximity/AP_Proximity.cpp
2016-10-19 05:24:20 -03:00
AP_SUBGROUPINFO ( proximity , " PRX " , 8 , ParametersG2 , AP_Proximity ) ,
2016-10-14 02:02:29 -03:00
# endif
2016-06-22 01:16:28 -03:00
// @Param: ACRO_Y_EXPO
// @DisplayName: Acro Yaw Expo
// @Description: Acro yaw expo to allow faster rotation when stick at edges
// @Values: 0:Disabled,0.1:Very Low,0.2:Low,0.3:Medium,0.4:High,0.5:Very High
2021-09-17 02:54:19 -03:00
// @Range: -1.0 0.95
2016-06-22 01:16:28 -03:00
// @User: Advanced
AP_GROUPINFO ( " ACRO_Y_EXPO " , 9 , ParametersG2 , acro_y_expo , ACRO_Y_EXPO_DEFAULT ) ,
2018-03-22 15:39:26 -03:00
# if MODE_ACRO_ENABLED == ENABLED
2016-06-22 01:16:28 -03:00
// @Param: ACRO_THR_MID
// @DisplayName: Acro Thr Mid
// @Description: Acro Throttle Mid
// @Range: 0 1
// @User: Advanced
AP_GROUPINFO ( " ACRO_THR_MID " , 10 , ParametersG2 , acro_thr_mid , ACRO_THR_MID_DEFAULT ) ,
2018-03-22 15:39:26 -03:00
# endif
2016-06-22 01:16:28 -03:00
2017-02-28 02:06:51 -04:00
// @Param: SYSID_ENFORCE
2016-08-19 01:36:47 -03:00
// @DisplayName: GCS sysid enforcement
// @Description: This controls whether packets from other than the expected GCS system ID will be accepted
// @Values: 0:NotEnforced,1:Enforced
// @User: Advanced
AP_GROUPINFO ( " SYSID_ENFORCE " , 11 , ParametersG2 , sysid_enforce , 0 ) ,
2018-03-22 15:40:32 -03:00
2018-02-28 08:20:57 -04:00
# if STATS_ENABLED == ENABLED
2016-10-13 03:30:30 -03:00
// @Group: STAT
// @Path: ../libraries/AP_Stats/AP_Stats.cpp
AP_SUBGROUPINFO ( stats , " STAT " , 12 , ParametersG2 , AP_Stats ) ,
2018-02-28 08:20:57 -04:00
# endif
2018-03-22 15:40:32 -03:00
2016-10-28 19:08:22 -03:00
# if GRIPPER_ENABLED == ENABLED
2018-03-22 15:40:32 -03:00
// @Group: GRIP_
2016-10-28 19:08:22 -03:00
// @Path: ../libraries/AP_Gripper/AP_Gripper.cpp
AP_SUBGROUPINFO ( gripper , " GRIP_ " , 13 , ParametersG2 , AP_Gripper ) ,
# endif
2016-12-12 06:22:56 -04:00
// @Param: FRAME_CLASS
// @DisplayName: Frame Class
// @Description: Controls major frame class for multicopter component
2021-06-06 16:29:12 -03:00
// @Values: 0:Undefined, 1:Quad, 2:Hexa, 3:Octa, 4:OctaQuad, 5:Y6, 6:Heli, 7:Tri, 8:SingleCopter, 9:CoaxCopter, 10:BiCopter, 11:Heli_Dual, 12:DodecaHexa, 13:HeliQuad, 14:Deca, 15:Scripting Matrix, 16:6DoF Scripting, 17:Dynamic Scripting Matrix
2016-12-12 06:22:56 -04:00
// @User: Standard
2017-05-12 10:35:23 -03:00
// @RebootRequired: True
2019-07-03 02:13:03 -03:00
AP_GROUPINFO ( " FRAME_CLASS " , 15 , ParametersG2 , frame_class , DEFAULT_FRAME_CLASS ) ,
2016-12-12 06:22:56 -04:00
2017-01-06 21:06:40 -04:00
// @Group: SERVO
2017-02-05 22:16:08 -04:00
// @Path: ../libraries/SRV_Channel/SRV_Channels.cpp
2017-01-06 21:06:40 -04:00
AP_SUBGROUPINFO ( servo_channels , " SERVO " , 16 , ParametersG2 , SRV_Channels ) ,
// @Group: RC
2018-08-03 23:28:09 -03:00
// @Path: ../libraries/RC_Channel/RC_Channels_VarInfo.h
2018-06-04 00:06:32 -03:00
AP_SUBGROUPINFO ( rc_channels , " RC " , 17 , ParametersG2 , RC_Channels_Copter ) ,
2017-03-14 06:47:18 -03:00
2020-04-06 01:13:09 -03:00
// 18 was used by AP_VisualOdom
2017-03-01 07:18:11 -04:00
2017-04-13 00:20:12 -03:00
// @Group: TCAL
// @Path: ../libraries/AP_TempCalibration/AP_TempCalibration.cpp
AP_SUBGROUPINFO ( temp_calibration , " TCAL " , 19 , ParametersG2 , AP_TempCalibration ) ,
2018-01-18 02:49:20 -04:00
# if TOY_MODE_ENABLED == ENABLED
// @Group: TMODE
// @Path: toy_mode.cpp
AP_SUBGROUPINFO ( toy_mode , " TMODE " , 20 , ParametersG2 , ToyMode ) ,
# endif
2017-07-26 14:14:40 -03:00
2018-02-21 23:58:28 -04:00
# if MODE_SMARTRTL_ENABLED == ENABLED
2017-09-08 23:45:31 -03:00
// @Group: SRTL_
// @Path: ../libraries/AP_SmartRTL/AP_SmartRTL.cpp
AP_SUBGROUPINFO ( smart_rtl , " SRTL_ " , 21 , ParametersG2 , AP_SmartRTL ) ,
2018-02-21 23:58:28 -04:00
# endif
2017-07-26 14:14:40 -03:00
2018-02-10 10:23:06 -04:00
# if WINCH_ENABLED == ENABLED
2020-07-24 05:38:12 -03:00
// 22 was AP_WheelEncoder
2017-10-04 23:21:23 -03:00
2020-07-24 05:38:12 -03:00
// @Group: WINCH
2017-10-04 23:21:23 -03:00
// @Path: ../libraries/AP_Winch/AP_Winch.cpp
AP_SUBGROUPINFO ( winch , " WINCH " , 23 , ParametersG2 , AP_Winch ) ,
2018-02-10 10:23:06 -04:00
# endif
2017-10-04 23:21:23 -03:00
2017-11-08 09:25:53 -04:00
// @Param: PILOT_SPEED_DN
// @DisplayName: Pilot maximum vertical speed descending
2022-01-19 22:06:00 -04:00
// @Description: The maximum vertical descending velocity the pilot may request in cm/s. If 0 PILOT_SPEED_UP value is used.
2017-11-08 09:25:53 -04:00
// @Units: cm/s
2022-01-19 22:06:00 -04:00
// @Range: 0 500
2017-11-08 09:25:53 -04:00
// @Increment: 10
// @User: Standard
AP_GROUPINFO ( " PILOT_SPEED_DN " , 24 , ParametersG2 , pilot_speed_dn , 0 ) ,
2018-01-23 08:33:24 -04:00
// @Param: LAND_ALT_LOW
// @DisplayName: Land alt low
// @Description: Altitude during Landing at which vehicle slows to LAND_SPEED
// @Units: cm
// @Range: 100 10000
// @Increment: 10
// @User: Advanced
AP_GROUPINFO ( " LAND_ALT_LOW " , 25 , ParametersG2 , land_alt_low , 1000 ) ,
2021-12-24 01:47:22 -04:00
# if !HAL_MINIMIZE_FEATURES && AP_OPTICALFLOW_ENABLED
2018-02-07 22:21:09 -04:00
// @Group: FHLD
// @Path: mode_flowhold.cpp
2019-05-09 23:18:49 -03:00
AP_SUBGROUPPTR ( mode_flowhold_ptr , " FHLD " , 26 , ParametersG2 , ModeFlowHold ) ,
2018-02-07 22:21:09 -04:00
# endif
2018-01-25 08:36:03 -04:00
2018-02-06 02:16:09 -04:00
# if MODE_FOLLOW_ENABLED == ENABLED
2018-01-25 08:36:03 -04:00
// @Group: FOLL
// @Path: ../libraries/AP_Follow/AP_Follow.cpp
AP_SUBGROUPINFO ( follow , " FOLL " , 27 , ParametersG2 , AP_Follow ) ,
2018-02-06 02:16:09 -04:00
# endif
2018-01-25 08:36:03 -04:00
2018-08-21 10:02:40 -03:00
# ifdef USER_PARAMS_ENABLED
2018-08-30 20:54:39 -03:00
AP_SUBGROUPINFO ( user_parameters , " USR " , 28 , ParametersG2 , UserParameters ) ,
2018-08-21 10:02:40 -03:00
# endif
2018-12-12 23:53:56 -04:00
# if AUTOTUNE_ENABLED == ENABLED
// @Group: AUTOTUNE_
2021-10-01 17:34:48 -03:00
// @Path: ../libraries/AC_AutoTune/AC_AutoTune_Multi.cpp,../libraries/AC_AutoTune/AC_AutoTune_Heli.cpp
2019-05-09 23:18:49 -03:00
AP_SUBGROUPPTR ( autotune_ptr , " AUTOTUNE_ " , 29 , ParametersG2 , AutoTune ) ,
2018-12-12 23:53:56 -04:00
# endif
2019-03-01 02:40:53 -04:00
2021-11-15 01:08:33 -04:00
# if AP_SCRIPTING_ENABLED
2019-06-17 19:27:55 -03:00
// @Group: SCR_
// @Path: ../libraries/AP_Scripting/AP_Scripting.cpp
2019-03-01 02:40:53 -04:00
AP_SUBGROUPINFO ( scripting , " SCR_ " , 30 , ParametersG2 , AP_Scripting ) ,
# endif
2019-04-03 09:32:26 -03:00
// @Param: TUNE_MIN
// @DisplayName: Tuning minimum
// @Description: Minimum value that the parameter currently being tuned with the transmitter's channel 6 knob will be set to
// @User: Standard
AP_GROUPINFO ( " TUNE_MIN " , 31 , ParametersG2 , tuning_min , 0 ) ,
// @Param: TUNE_MAX
// @DisplayName: Tuning maximum
// @Description: Maximum value that the parameter currently being tuned with the transmitter's channel 6 knob will be set to
// @User: Standard
AP_GROUPINFO ( " TUNE_MAX " , 32 , ParametersG2 , tuning_max , 0 ) ,
2019-06-05 07:47:32 -03:00
# if AC_OAPATHPLANNER_ENABLED == ENABLED
// @Group: OA_
// @Path: ../libraries/AC_Avoidance/AP_OAPathPlanner.cpp
AP_SUBGROUPINFO ( oa , " OA_ " , 33 , ParametersG2 , AP_OAPathPlanner ) ,
# endif
2019-07-29 04:55:40 -03:00
# if MODE_SYSTEMID_ENABLED == ENABLED
// @Group: SID
// @Path: mode_systemid.cpp
AP_SUBGROUPPTR ( mode_systemid_ptr , " SID " , 34 , ParametersG2 , ModeSystemId ) ,
# endif
2019-09-21 21:09:18 -03:00
2019-03-21 06:51:35 -03:00
// @Param: FS_VIBE_ENABLE
// @DisplayName: Vibration Failsafe enable
// @Description: This enables the vibration failsafe which will use modified altitude estimation and control during high vibrations
// @Values: 0:Disabled, 1:Enabled
// @User: Standard
AP_GROUPINFO ( " FS_VIBE_ENABLE " , 35 , ParametersG2 , fs_vibe_enabled , 1 ) ,
2019-09-21 21:09:18 -03:00
// @Param: FS_OPTIONS
// @DisplayName: Failsafe options bitmask
// @Description: Bitmask of additional options for battery, radio, & GCS failsafes. 0 (default) disables all options.
// @Values: 0:Disabled, 1:Continue if in Auto on RC failsafe only, 2:Continue if in Auto on GCS failsafe only, 3:Continue if in Auto on RC and/or GCS failsafe, 4:Continue if in Guided on RC failsafe only, 8:Continue if landing on any failsafe, 16:Continue if in pilot controlled modes on GCS failsafe, 19:Continue if in Auto on RC and/or GCS failsafe and continue if in pilot controlled modes on GCS failsafe
2020-08-14 16:40:20 -03:00
// @Bitmask: 0:Continue if in Auto on RC failsafe, 1:Continue if in Auto on GCS failsafe, 2:Continue if in Guided on RC failsafe, 3:Continue if landing on any failsafe, 4:Continue if in pilot controlled modes on GCS failsafe, 5:Release Gripper
2019-09-21 21:09:18 -03:00
// @User: Advanced
2020-12-08 01:39:11 -04:00
AP_GROUPINFO ( " FS_OPTIONS " , 36 , ParametersG2 , fs_options , ( float ) Copter : : FailsafeOption : : GCS_CONTINUE_IF_PILOT_CONTROL ) ,
2019-09-21 21:09:18 -03:00
2019-11-28 16:21:07 -04:00
# if MODE_AUTOROTATE_ENABLED == ENABLED
// @Group: AROT_
// @Path: ../libraries/AC_Autorotation/AC_Autorotation.cpp
AP_SUBGROUPINFO ( arot , " AROT_ " , 37 , ParametersG2 , AC_Autorotation ) ,
# endif
2020-04-02 05:25:39 -03:00
# if MODE_ZIGZAG_ENABLED == ENABLED
2020-05-11 23:17:21 -03:00
// @Group: ZIGZ_
// @Path: mode_zigzag.cpp
AP_SUBGROUPPTR ( mode_zigzag_ptr , " ZIGZ_ " , 38 , ParametersG2 , ModeZigZag ) ,
# endif
2020-02-02 09:07:21 -04:00
2020-06-16 17:01:19 -03:00
# if MODE_ACRO_ENABLED == ENABLED
// @Param: ACRO_OPTIONS
// @DisplayName: Acro mode options
// @Description: A range of options that can be applied to change acro mode behaviour. Air-mode enables ATC_THR_MIX_MAN at all times (air-mode has no effect on helicopters). Rate Loop Only disables the use of angle stabilization and uses angular rate stabilization only.
// @Bitmask: 0:Air-mode,1:Rate Loop Only
// @User: Advanced
AP_GROUPINFO ( " ACRO_OPTIONS " , 39 , ParametersG2 , acro_options , 0 ) ,
# endif
2020-09-24 20:42:34 -03:00
# if MODE_AUTO_ENABLED == ENABLED
// @Param: AUTO_OPTIONS
// @DisplayName: Auto mode options
2020-11-12 20:15:53 -04:00
// @Description: A range of options that can be applied to change auto mode behaviour. Allow Arming allows the copter to be armed in Auto. Allow Takeoff Without Raising Throttle allows takeoff without the pilot having to raise the throttle. Ignore pilot yaw overrides the pilot's yaw stick being used while in auto.
// @Bitmask: 0:Allow Arming,1:Allow Takeoff Without Raising Throttle,2:Ignore pilot yaw
2020-09-24 20:42:34 -03:00
// @User: Advanced
AP_GROUPINFO ( " AUTO_OPTIONS " , 40 , ParametersG2 , auto_options , 0 ) ,
# endif
2020-06-16 17:01:19 -03:00
2020-10-14 02:25:41 -03:00
# if MODE_GUIDED_ENABLED == ENABLED
2020-10-19 01:39:51 -03:00
// @Param: GUID_OPTIONS
2020-10-14 02:25:41 -03:00
// @DisplayName: Guided mode options
// @Description: Options that can be applied to change guided mode behaviour
2021-09-07 09:30:25 -03:00
// @Bitmask: 0:Allow Arming from Transmitter,2:Ignore pilot yaw,3:SetAttitudeTarget interprets Thrust As Thrust,4:Do not stabilize PositionXY,5:Do not stabilize VelocityXY,6:Waypoint navigation used for position targets
2020-10-14 02:25:41 -03:00
// @User: Advanced
2020-10-19 01:39:51 -03:00
AP_GROUPINFO ( " GUID_OPTIONS " , 41 , ParametersG2 , guided_options , 0 ) ,
2020-10-14 02:25:41 -03:00
# endif
2020-11-11 20:46:06 -04:00
// @Param: FS_GCS_TIMEOUT
// @DisplayName: GCS failsafe timeout
// @Description: Timeout before triggering the GCS failsafe
// @Units: s
// @Range: 2 120
// @Increment: 1
// @User: Standard
AP_GROUPINFO ( " FS_GCS_TIMEOUT " , 42 , ParametersG2 , fs_gcs_timeout , 5 ) ,
2020-11-12 20:15:53 -04:00
# if MODE_RTL_ENABLED == ENABLED
// @Param: RTL_OPTIONS
// @DisplayName: RTL mode options
// @Description: Options that can be applied to change RTL mode behaviour
// @Bitmask: 2:Ignore pilot yaw
// @User: Advanced
AP_GROUPINFO ( " RTL_OPTIONS " , 43 , ParametersG2 , rtl_options , 0 ) ,
# endif
2021-02-17 07:19:22 -04:00
// @Param: FLIGHT_OPTIONS
// @DisplayName: Flight mode options
// @Description: Flight mode specific options
2022-01-26 16:01:03 -04:00
// @Bitmask: 0:Disable thrust loss check, 1:Disable yaw imbalance warning, 2:Release gripper on thrust loss
2021-02-17 07:19:22 -04:00
// @User: Advanced
AP_GROUPINFO ( " FLIGHT_OPTIONS " , 44 , ParametersG2 , flight_options , 0 ) ,
2021-06-14 00:38:37 -03:00
# if RANGEFINDER_ENABLED == ENABLED
// @Param: RNGFND_FILT
// @DisplayName: Rangefinder filter
// @Description: Rangefinder filter to smooth distance. Set to zero to disable filtering
// @Units: Hz
2021-06-24 22:09:55 -03:00
// @Range: 0 5
2021-06-14 00:38:37 -03:00
// @Increment: 0.05
// @User: Standard
// @RebootRequired: True
AP_GROUPINFO ( " RNGFND_FILT " , 45 , ParametersG2 , rangefinder_filt , RANGEFINDER_FILT_DEFAULT ) ,
# endif
2021-07-09 02:02:07 -03:00
# if MODE_GUIDED_ENABLED == ENABLED
// @Param: GUID_TIMEOUT
// @DisplayName: Guided mode timeout
2021-09-09 01:05:49 -03:00
// @Description: Guided mode timeout after which vehicle will stop or return to level if no updates are received from caller. Only applicable during any combination of velocity, acceleration, angle control, and/or angular rate control
2021-07-09 02:02:07 -03:00
// @Units: s
// @Range: 0.1 5
// @User: Advanced
AP_GROUPINFO ( " GUID_TIMEOUT " , 46 , ParametersG2 , guided_timeout , 3.0 ) ,
# endif
2021-09-17 02:54:19 -03:00
# if MODE_ACRO_ENABLED == ENABLED || MODE_SPORT_ENABLED == ENABLED
2021-09-16 01:34:34 -03:00
// @Param: ACRO_RP_RATE
// @DisplayName: Acro Roll and Pitch Rate
// @Description: Acro mode maximum roll and pitch rate. Higher values mean faster rate of rotation
2021-09-17 02:54:19 -03:00
// @Units: deg/s
// @Range: 1 1080
2021-09-16 01:34:34 -03:00
// @User: Standard
AP_GROUPINFO ( " ACRO_RP_RATE " , 47 , ParametersG2 , acro_rp_rate , ACRO_RP_RATE_DEFAULT ) ,
2021-10-11 03:19:53 -03:00
# endif
2021-09-16 01:34:34 -03:00
2021-10-11 03:19:53 -03:00
# if MODE_ACRO_ENABLED == ENABLED || MODE_DRIFT_ENABLED == ENABLED
2021-09-16 01:34:34 -03:00
// @Param: ACRO_Y_RATE
// @DisplayName: Acro Yaw Rate
// @Description: Acro mode maximum yaw rate. Higher value means faster rate of rotation
2021-09-17 02:54:19 -03:00
// @Units: deg/s
2021-09-16 01:34:34 -03:00
// @Range: 1 360
// @User: Standard
AP_GROUPINFO ( " ACRO_Y_RATE " , 48 , ParametersG2 , acro_y_rate , ACRO_Y_RATE_DEFAULT ) ,
# endif
// @Param: PILOT_Y_RATE
// @DisplayName: Pilot controlled yaw rate
// @Description: Pilot controlled yaw rate max. Used in all pilot controlled modes except Acro
2021-09-17 02:54:19 -03:00
// @Units: deg/s
2021-09-16 01:34:34 -03:00
// @Range: 1 360
// @User: Standard
AP_GROUPINFO ( " PILOT_Y_RATE " , 49 , ParametersG2 , pilot_y_rate , PILOT_Y_RATE_DEFAULT ) ,
// @Param: PILOT_Y_EXPO
// @DisplayName: Pilot controlled yaw expo
2021-09-17 02:54:19 -03:00
// @Description: Pilot controlled yaw expo to allow faster rotation when stick at edges
// @Values: 0:Disabled,0.1:Very Low,0.2:Low,0.3:Medium,0.4:High,0.5:Very High
// @Range: -0.5 1.0
// @User: Advanced
2021-09-16 01:34:34 -03:00
AP_GROUPINFO ( " PILOT_Y_EXPO " , 50 , ParametersG2 , pilot_y_expo , PILOT_Y_EXPO_DEFAULT ) ,
2021-10-13 02:11:06 -03:00
// @Param: SURFTRAK_MODE
// @DisplayName: Surface Tracking Mode
// @Description: set which surface to track in surface tracking
// @Values: 0:Do not track, 1:Ground, 2:Ceiling
// @User: Advanced
AP_GROUPINFO ( " SURFTRAK_MODE " , 51 , ParametersG2 , surftrak_mode , ( uint8_t ) Copter : : SurfaceTracking : : Surface : : GROUND ) ,
2016-06-04 23:37:55 -03:00
AP_GROUPEND
} ;
2016-08-16 07:23:27 -03:00
/*
constructor for g2 object
*/
ParametersG2 : : ParametersG2 ( void )
2018-03-16 02:31:23 -03:00
: temp_calibration ( ) // this doesn't actually need constructing, but removing it here is problematic syntax-wise
2018-02-22 00:53:20 -04:00
# if BEACON_ENABLED == ENABLED
, beacon ( copter . serial_manager )
# endif
2021-03-25 05:08:44 -03:00
# if HAL_PROXIMITY_ENABLED
2019-09-27 05:23:07 -03:00
, proximity ( )
2017-01-02 20:36:26 -04:00
# endif
2016-08-25 09:19:31 -03:00
# if ADVANCED_FAILSAFE == ENABLED
2021-07-30 09:25:40 -03:00
, afs ( )
2016-08-16 07:23:27 -03:00
# endif
2018-02-21 23:58:28 -04:00
# if MODE_SMARTRTL_ENABLED == ENABLED
2018-03-31 09:28:15 -03:00
, smart_rtl ( )
2018-02-21 23:58:28 -04:00
# endif
2021-12-24 01:47:22 -04:00
# if !HAL_MINIMIZE_FEATURES && AP_OPTICALFLOW_ENABLED
2018-02-07 22:21:09 -04:00
, mode_flowhold_ptr ( & copter . mode_flowhold )
# endif
2018-02-06 02:16:09 -04:00
# if MODE_FOLLOW_ENABLED == ENABLED
2018-03-31 09:28:15 -03:00
, follow ( )
2018-02-06 02:16:09 -04:00
# endif
2018-08-21 10:02:40 -03:00
# ifdef USER_PARAMS_ENABLED
, user_parameters ( )
# endif
2018-12-12 23:53:56 -04:00
# if AUTOTUNE_ENABLED == ENABLED
2021-03-24 21:15:20 -03:00
, autotune_ptr ( & copter . mode_autotune . autotune )
2018-12-12 23:53:56 -04:00
# endif
2019-07-29 04:55:40 -03:00
# if MODE_SYSTEMID_ENABLED == ENABLED
, mode_systemid_ptr ( & copter . mode_systemid )
# endif
2019-11-28 16:21:07 -04:00
# if MODE_AUTOROTATE_ENABLED == ENABLED
2020-10-01 03:35:10 -03:00
, arot ( )
2019-11-28 16:21:07 -04:00
# endif
2021-08-12 00:38:21 -03:00
# if HAL_BUTTON_ENABLED
2019-11-27 18:34:07 -04:00
, button_ptr ( & copter . button )
2021-08-12 00:38:21 -03:00
# endif
2020-05-11 23:17:21 -03:00
# if MODE_ZIGZAG_ENABLED == ENABLED
, mode_zigzag_ptr ( & copter . mode_zigzag )
# endif
2016-08-16 07:23:27 -03:00
{
AP_Param : : setup_object_defaults ( this , var_info ) ;
}
2016-06-04 23:37:55 -03:00
2013-10-01 10:34:44 -03:00
/*
This is a conversion table from old parameter values to new
parameter names . The startup code looks for saved values of the old
parameters and will copy them across to the new parameters if the
new parameter does not yet have a saved value . It then saves the new
value .
Note that this works even if the old parameter has been removed . It
relies on the old k_param index not being removed
The second column below is the index in the var_info [ ] table for the
old object . This should be zero for top level parameters .
*/
2015-10-25 14:03:46 -03:00
const AP_Param : : ConversionInfo conversion_table [ ] = {
2014-10-16 21:37:49 -03:00
{ Parameters : : k_param_log_bitmask_old , 0 , AP_PARAM_INT16 , " LOG_BITMASK " } ,
2015-01-19 09:52:54 -04:00
{ Parameters : : k_param_serial0_baud , 0 , AP_PARAM_INT16 , " SERIAL0_BAUD " } ,
{ Parameters : : k_param_serial1_baud , 0 , AP_PARAM_INT16 , " SERIAL1_BAUD " } ,
{ Parameters : : k_param_serial2_baud , 0 , AP_PARAM_INT16 , " SERIAL2_BAUD " } ,
2016-09-22 20:59:14 -03:00
{ Parameters : : k_param_arming_check_old , 0 , AP_PARAM_INT8 , " ARMING_CHECK " } ,
2018-02-28 19:32:16 -04:00
// battery
2018-11-05 17:43:58 -04:00
{ Parameters : : k_param_fs_batt_voltage , 0 , AP_PARAM_FLOAT , " BATT_LOW_VOLT " } ,
{ Parameters : : k_param_fs_batt_mah , 0 , AP_PARAM_FLOAT , " BATT_LOW_MAH " } ,
{ Parameters : : k_param_failsafe_battery_enabled , 0 , AP_PARAM_INT8 , " BATT_FS_LOW_ACT " } ,
2018-06-04 00:06:32 -03:00
{ Parameters : : Parameters : : k_param_ch7_option_old , 0 , AP_PARAM_INT8 , " RC7_OPTION " } ,
{ Parameters : : Parameters : : k_param_ch8_option_old , 0 , AP_PARAM_INT8 , " RC8_OPTION " } ,
{ Parameters : : Parameters : : k_param_ch9_option_old , 0 , AP_PARAM_INT8 , " RC9_OPTION " } ,
{ Parameters : : Parameters : : k_param_ch10_option_old , 0 , AP_PARAM_INT8 , " RC10_OPTION " } ,
{ Parameters : : Parameters : : k_param_ch11_option_old , 0 , AP_PARAM_INT8 , " RC11_OPTION " } ,
{ Parameters : : Parameters : : k_param_ch12_option_old , 0 , AP_PARAM_INT8 , " RC12_OPTION " } ,
2019-03-25 05:34:42 -03:00
{ Parameters : : k_param_compass_enabled_deprecated , 0 , AP_PARAM_INT8 , " COMPASS_ENABLE " } ,
2019-04-10 22:58:24 -03:00
{ Parameters : : k_param_arming , 2 , AP_PARAM_INT16 , " ARMING_CHECK " } ,
2013-10-01 10:34:44 -03:00
} ;
2012-02-12 07:26:36 -04:00
2015-05-29 23:12:49 -03:00
void Copter : : load_parameters ( void )
2012-02-12 07:26:36 -04:00
{
2014-01-30 22:10:00 -04:00
if ( ! AP_Param : : check_var_info ( ) ) {
2017-08-11 01:08:41 -03:00
hal . console - > printf ( " Bad var table \n " ) ;
2015-11-19 23:04:45 -04:00
AP_HAL : : panic ( " Bad var table " ) ;
2014-01-30 22:10:00 -04:00
}
2015-01-28 19:18:20 -04:00
hal . util - > set_soft_armed ( false ) ;
2012-08-21 23:19:50 -03:00
if ( ! g . format_version . load ( ) | |
g . format_version ! = Parameters : : k_format_version ) {
// erase all parameters
2017-08-11 01:08:41 -03:00
hal . console - > printf ( " Firmware change: erasing EEPROM... \n " ) ;
2018-12-28 21:05:25 -04:00
StorageManager : : erase ( ) ;
2012-08-21 23:19:50 -03:00
AP_Param : : erase_all ( ) ;
// save the current format version
g . format_version . set_and_save ( Parameters : : k_format_version ) ;
2017-08-11 01:08:41 -03:00
hal . console - > printf ( " done. \n " ) ;
2012-08-21 23:19:50 -03:00
}
2016-01-06 18:32:27 -04:00
uint32_t before = micros ( ) ;
// Load all auto-loaded EEPROM variables
2018-06-14 17:03:41 -03:00
AP_Param : : load_all ( ) ;
2016-01-06 18:32:27 -04:00
AP_Param : : convert_old_parameters ( & conversion_table [ 0 ] , ARRAY_SIZE ( conversion_table ) ) ;
2018-11-09 02:36:42 -04:00
2021-02-06 23:29:33 -04:00
# if LANDING_GEAR_ENABLED == ENABLED
2018-11-09 02:36:42 -04:00
// convert landing gear parameters
convert_lgr_parameters ( ) ;
2021-02-06 23:29:33 -04:00
# endif
2018-11-09 02:36:42 -04:00
2019-09-21 21:09:18 -03:00
// convert fs_options parameters
convert_fs_options_params ( ) ;
2021-09-15 01:00:54 -03:00
# if MODE_RTL_ENABLED == ENABLED
g . rtl_altitude . convert_parameter_width ( AP_PARAM_INT16 ) ;
# endif
2017-08-11 01:08:41 -03:00
hal . console - > printf ( " load_all took %uus \n " , ( unsigned ) ( micros ( ) - before ) ) ;
2016-02-16 22:34:31 -04:00
2017-02-07 19:47:36 -04:00
// setup AP_Param frame type flags
AP_Param : : set_frame_type_flags ( AP_PARAM_FRAME_COPTER ) ;
2018-11-26 00:15:06 -04:00
2016-02-16 22:34:31 -04:00
}
2019-10-28 22:15:25 -03:00
// handle conversion of PID gains
2016-02-16 22:34:31 -04:00
void Copter : : convert_pid_parameters ( void )
{
// conversion info
2017-01-10 01:30:03 -04:00
const AP_Param : : ConversionInfo pid_conversion_info [ ] = {
2016-02-16 22:34:31 -04:00
{ Parameters : : k_param_pid_rate_roll , 0 , AP_PARAM_FLOAT , " ATC_RAT_RLL_P " } ,
{ Parameters : : k_param_pid_rate_roll , 1 , AP_PARAM_FLOAT , " ATC_RAT_RLL_I " } ,
{ Parameters : : k_param_pid_rate_roll , 2 , AP_PARAM_FLOAT , " ATC_RAT_RLL_D " } ,
{ Parameters : : k_param_pid_rate_pitch , 0 , AP_PARAM_FLOAT , " ATC_RAT_PIT_P " } ,
{ Parameters : : k_param_pid_rate_pitch , 1 , AP_PARAM_FLOAT , " ATC_RAT_PIT_I " } ,
{ Parameters : : k_param_pid_rate_pitch , 2 , AP_PARAM_FLOAT , " ATC_RAT_PIT_D " } ,
{ Parameters : : k_param_pid_rate_yaw , 0 , AP_PARAM_FLOAT , " ATC_RAT_YAW_P " } ,
{ Parameters : : k_param_pid_rate_yaw , 1 , AP_PARAM_FLOAT , " ATC_RAT_YAW_I " } ,
{ Parameters : : k_param_pid_rate_yaw , 2 , AP_PARAM_FLOAT , " ATC_RAT_YAW_D " } ,
2016-05-12 04:34:36 -03:00
# if FRAME_CONFIG == HELI_FRAME
{ Parameters : : k_param_pid_rate_roll , 4 , AP_PARAM_FLOAT , " ATC_RAT_RLL_VFF " } ,
{ Parameters : : k_param_pid_rate_pitch , 4 , AP_PARAM_FLOAT , " ATC_RAT_PIT_VFF " } ,
{ Parameters : : k_param_pid_rate_yaw , 4 , AP_PARAM_FLOAT , " ATC_RAT_YAW_VFF " } ,
# endif
2016-02-16 22:34:31 -04:00
} ;
2017-01-10 01:30:03 -04:00
const AP_Param : : ConversionInfo imax_conversion_info [ ] = {
2016-02-16 22:34:31 -04:00
{ Parameters : : k_param_pid_rate_roll , 5 , AP_PARAM_FLOAT , " ATC_RAT_RLL_IMAX " } ,
{ Parameters : : k_param_pid_rate_pitch , 5 , AP_PARAM_FLOAT , " ATC_RAT_PIT_IMAX " } ,
2016-05-12 04:34:36 -03:00
{ Parameters : : k_param_pid_rate_yaw , 5 , AP_PARAM_FLOAT , " ATC_RAT_YAW_IMAX " } ,
# if FRAME_CONFIG == HELI_FRAME
{ Parameters : : k_param_pid_rate_roll , 7 , AP_PARAM_FLOAT , " ATC_RAT_RLL_ILMI " } ,
{ Parameters : : k_param_pid_rate_pitch , 7 , AP_PARAM_FLOAT , " ATC_RAT_PIT_ILMI " } ,
{ Parameters : : k_param_pid_rate_yaw , 7 , AP_PARAM_FLOAT , " ATC_RAT_YAW_ILMI " } ,
# endif
2016-02-16 22:34:31 -04:00
} ;
2019-10-28 22:15:25 -03:00
// conversion from Copter-3.3 to Copter-3.4
2017-01-10 01:30:03 -04:00
const AP_Param : : ConversionInfo angle_and_filt_conversion_info [ ] = {
2016-05-28 03:44:27 -03:00
{ Parameters : : k_param_p_stabilize_roll , 0 , AP_PARAM_FLOAT , " ATC_ANG_RLL_P " } ,
{ Parameters : : k_param_p_stabilize_pitch , 0 , AP_PARAM_FLOAT , " ATC_ANG_PIT_P " } ,
{ Parameters : : k_param_p_stabilize_yaw , 0 , AP_PARAM_FLOAT , " ATC_ANG_YAW_P " } ,
2016-02-16 22:34:31 -04:00
{ Parameters : : k_param_pid_rate_roll , 6 , AP_PARAM_FLOAT , " ATC_RAT_RLL_FILT " } ,
{ Parameters : : k_param_pid_rate_pitch , 6 , AP_PARAM_FLOAT , " ATC_RAT_PIT_FILT " } ,
2017-11-20 07:26:32 -04:00
{ Parameters : : k_param_pid_rate_yaw , 6 , AP_PARAM_FLOAT , " ATC_RAT_YAW_FILT " } ,
{ Parameters : : k_param_pi_vel_xy , 0 , AP_PARAM_FLOAT , " PSC_VELXY_P " } ,
{ Parameters : : k_param_pi_vel_xy , 1 , AP_PARAM_FLOAT , " PSC_VELXY_I " } ,
{ Parameters : : k_param_pi_vel_xy , 2 , AP_PARAM_FLOAT , " PSC_VELXY_IMAX " } ,
2021-08-03 01:06:21 -03:00
{ Parameters : : k_param_pi_vel_xy , 3 , AP_PARAM_FLOAT , " PSC_VELXY_FLTE " } ,
2017-11-20 21:49:11 -04:00
{ Parameters : : k_param_p_vel_z , 0 , AP_PARAM_FLOAT , " PSC_VELZ_P " } ,
2018-01-27 02:40:46 -04:00
{ Parameters : : k_param_pid_accel_z , 0 , AP_PARAM_FLOAT , " PSC_ACCZ_P " } ,
{ Parameters : : k_param_pid_accel_z , 1 , AP_PARAM_FLOAT , " PSC_ACCZ_I " } ,
{ Parameters : : k_param_pid_accel_z , 2 , AP_PARAM_FLOAT , " PSC_ACCZ_D " } ,
{ Parameters : : k_param_pid_accel_z , 5 , AP_PARAM_FLOAT , " PSC_ACCZ_IMAX " } ,
2019-10-28 22:15:25 -03:00
{ Parameters : : k_param_pid_accel_z , 6 , AP_PARAM_FLOAT , " PSC_ACCZ_FLTE " } ,
2017-11-20 21:49:11 -04:00
{ Parameters : : k_param_p_alt_hold , 0 , AP_PARAM_FLOAT , " PSC_POSZ_P " } ,
{ Parameters : : k_param_p_pos_xy , 0 , AP_PARAM_FLOAT , " PSC_POSXY_P " } ,
2016-02-16 22:34:31 -04:00
} ;
2017-01-10 01:30:03 -04:00
const AP_Param : : ConversionInfo throttle_conversion_info [ ] = {
2016-06-04 01:32:34 -03:00
{ Parameters : : k_param_throttle_min , 0 , AP_PARAM_FLOAT , " MOT_SPIN_MIN " } ,
{ Parameters : : k_param_throttle_mid , 0 , AP_PARAM_FLOAT , " MOT_THST_HOVER " }
} ;
2018-03-27 23:13:37 -03:00
const AP_Param : : ConversionInfo loiter_conversion_info [ ] = {
{ Parameters : : k_param_wp_nav , 4 , AP_PARAM_FLOAT , " LOIT_SPEED " } ,
{ Parameters : : k_param_wp_nav , 7 , AP_PARAM_FLOAT , " LOIT_BRK_JERK " } ,
{ Parameters : : k_param_wp_nav , 8 , AP_PARAM_FLOAT , " LOIT_ACC_MAX " } ,
{ Parameters : : k_param_wp_nav , 9 , AP_PARAM_FLOAT , " LOIT_BRK_ACCEL " }
} ;
2016-02-16 22:34:31 -04:00
// gains increase by 27% due to attitude controller's switch to use radians instead of centi-degrees
// and motor libraries switch to accept inputs in -1 to +1 range instead of -4500 ~ +4500
float pid_scaler = 1.27f ;
2017-01-09 05:54:18 -04:00
# if FRAME_CONFIG != HELI_FRAME
2016-02-16 22:34:31 -04:00
// Multicopter x-frame gains are 40% lower because -1 or +1 input to motors now results in maximum rotation
2016-12-14 21:26:36 -04:00
if ( g . frame_type = = AP_Motors : : MOTOR_FRAME_TYPE_X | | g . frame_type = = AP_Motors : : MOTOR_FRAME_TYPE_V | | g . frame_type = = AP_Motors : : MOTOR_FRAME_TYPE_H ) {
2016-02-16 22:34:31 -04:00
pid_scaler = 0.9f ;
}
# endif
// scale PID gains
2019-05-27 21:57:41 -03:00
for ( const auto & info : pid_conversion_info ) {
AP_Param : : convert_old_parameter ( & info , pid_scaler ) ;
2016-02-16 22:34:31 -04:00
}
// reduce IMAX into -1 ~ +1 range
2019-05-27 21:57:41 -03:00
for ( const auto & info : imax_conversion_info ) {
AP_Param : : convert_old_parameter ( & info , 1.0f / 4500.0f ) ;
2016-02-16 22:34:31 -04:00
}
2016-05-28 03:44:27 -03:00
// convert angle controller gain and filter without scaling
2019-05-27 21:57:41 -03:00
for ( const auto & info : angle_and_filt_conversion_info ) {
AP_Param : : convert_old_parameter ( & info , 1.0f ) ;
2016-02-16 22:34:31 -04:00
}
2016-06-04 01:32:34 -03:00
// convert throttle parameters (multicopter only)
2019-05-27 21:57:41 -03:00
for ( const auto & info : throttle_conversion_info ) {
AP_Param : : convert_old_parameter ( & info , 0.001f ) ;
2016-06-04 01:32:34 -03:00
}
2018-01-26 22:09:13 -04:00
// convert RC_FEEL_RP to ATC_INPUT_TC
const AP_Param : : ConversionInfo rc_feel_rp_conversion_info = { Parameters : : k_param_rc_feel_rp , 0 , AP_PARAM_INT8 , " ATC_INPUT_TC " } ;
AP_Int8 rc_feel_rp_old ;
if ( AP_Param : : find_old_parameter ( & rc_feel_rp_conversion_info , & rc_feel_rp_old ) ) {
2018-03-15 08:32:06 -03:00
AP_Param : : set_default_by_name ( rc_feel_rp_conversion_info . new_name , ( 1.0f / ( 2.0f + rc_feel_rp_old . get ( ) * 0.1f ) ) ) ;
2018-01-26 22:09:13 -04:00
}
2018-03-27 23:13:37 -03:00
// convert loiter parameters
2019-05-27 21:57:41 -03:00
for ( const auto & info : loiter_conversion_info ) {
AP_Param : : convert_old_parameter ( & info , 1.0f ) ;
2018-03-27 23:13:37 -03:00
}
2017-01-08 21:48:13 -04:00
2018-11-26 00:15:06 -04:00
// TradHeli default parameters
# if FRAME_CONFIG == HELI_FRAME
2018-12-05 21:29:21 -04:00
static const struct AP_Param : : defaults_table_struct heli_defaults_table [ ] = {
2018-11-28 20:55:49 -04:00
{ " LOIT_ACC_MAX " , 500.0f } ,
{ " LOIT_BRK_ACCEL " , 125.0f } ,
{ " LOIT_BRK_DELAY " , 1.0f } ,
{ " LOIT_BRK_JERK " , 250.0f } ,
{ " LOIT_SPEED " , 3000.0f } ,
{ " PHLD_BRAKE_ANGLE " , 800.0f } ,
{ " PHLD_BRAKE_RATE " , 4.0f } ,
{ " PSC_ACCZ_P " , 0.28f } ,
{ " PSC_VELXY_D " , 0.0f } ,
{ " PSC_VELXY_I " , 0.5f } ,
{ " PSC_VELXY_P " , 1.0f } ,
2019-01-26 10:34:19 -04:00
{ " RC8_OPTION " , 32 } ,
2020-07-08 09:53:04 -03:00
{ " RC_OPTIONS " , 0 } ,
2022-02-14 23:14:06 -04:00
{ " ATC_RAT_RLL_ILMI " , 0.05 } ,
{ " ATC_RAT_PIT_ILMI " , 0.05 } ,
2018-11-28 20:55:49 -04:00
} ;
AP_Param : : set_defaults_from_table ( heli_defaults_table , ARRAY_SIZE ( heli_defaults_table ) ) ;
2018-11-26 00:15:06 -04:00
# endif
2019-10-28 22:15:25 -03:00
// attitude and position control filter parameter changes (from _FILT to FLTD, FLTE, FLTT) for Copter-4.0
2019-10-24 01:25:57 -03:00
// magic numbers shown below are discovered by setting AP_PARAM_KEY_DUMP = 1
2019-06-27 06:36:47 -03:00
const AP_Param : : ConversionInfo ff_and_filt_conversion_info [ ] = {
# if FRAME_CONFIG == HELI_FRAME
// tradheli moves ATC_RAT_RLL/PIT_FILT to FLTE, ATC_RAT_YAW_FILT to FLTE
{ Parameters : : k_param_attitude_control , 386 , AP_PARAM_FLOAT , " ATC_RAT_RLL_FLTE " } ,
{ Parameters : : k_param_attitude_control , 387 , AP_PARAM_FLOAT , " ATC_RAT_PIT_FLTE " } ,
{ Parameters : : k_param_attitude_control , 388 , AP_PARAM_FLOAT , " ATC_RAT_YAW_FLTE " } ,
# else
2019-10-24 01:25:57 -03:00
// multicopters move ATC_RAT_RLL/PIT_FILT to FLTD & FLTT, ATC_RAT_YAW_FILT to FLTE
2019-06-27 06:36:47 -03:00
{ Parameters : : k_param_attitude_control , 385 , AP_PARAM_FLOAT , " ATC_RAT_RLL_FLTD " } ,
2019-10-24 01:25:57 -03:00
{ Parameters : : k_param_attitude_control , 385 , AP_PARAM_FLOAT , " ATC_RAT_RLL_FLTT " } ,
2019-06-27 06:36:47 -03:00
{ Parameters : : k_param_attitude_control , 386 , AP_PARAM_FLOAT , " ATC_RAT_PIT_FLTD " } ,
2019-10-24 01:25:57 -03:00
{ Parameters : : k_param_attitude_control , 386 , AP_PARAM_FLOAT , " ATC_RAT_PIT_FLTT " } ,
2019-06-27 06:36:47 -03:00
{ Parameters : : k_param_attitude_control , 387 , AP_PARAM_FLOAT , " ATC_RAT_YAW_FLTE " } ,
{ Parameters : : k_param_attitude_control , 449 , AP_PARAM_FLOAT , " ATC_RAT_RLL_FF " } ,
{ Parameters : : k_param_attitude_control , 450 , AP_PARAM_FLOAT , " ATC_RAT_PIT_FF " } ,
{ Parameters : : k_param_attitude_control , 451 , AP_PARAM_FLOAT , " ATC_RAT_YAW_FF " } ,
# endif
2019-10-28 22:15:25 -03:00
{ Parameters : : k_param_pos_control , 388 , AP_PARAM_FLOAT , " PSC_ACCZ_FLTE " } ,
2019-06-27 06:36:47 -03:00
} ;
uint8_t filt_table_size = ARRAY_SIZE ( ff_and_filt_conversion_info ) ;
for ( uint8_t i = 0 ; i < filt_table_size ; i + + ) {
AP_Param : : convert_old_parameters ( & ff_and_filt_conversion_info [ i ] , 1.0f ) ;
}
2022-04-15 02:02:48 -03:00
if ( ! ins . gyro_notch_enabled ( ) ) {
// notch filter parameter conversions (moved to INS_HNTC2) for 4.2.x, converted from fixed notch
const AP_Param : : ConversionInfo notchfilt_conversion_info [ ] {
{ Parameters : : k_param_ins , 101 , AP_PARAM_INT8 , " INS_HNTC2_ENABLE " } ,
{ Parameters : : k_param_ins , 293 , AP_PARAM_FLOAT , " INS_HNTC2_ATT " } ,
{ Parameters : : k_param_ins , 357 , AP_PARAM_FLOAT , " INS_HNTC2_FREQ " } ,
{ Parameters : : k_param_ins , 421 , AP_PARAM_FLOAT , " INS_HNTC2_BW " } ,
} ;
uint8_t notchfilt_table_size = ARRAY_SIZE ( notchfilt_conversion_info ) ;
for ( uint8_t i = 0 ; i < notchfilt_table_size ; i + + ) {
AP_Param : : convert_old_parameters ( & notchfilt_conversion_info [ i ] , 1.0f ) ;
}
if ( ins . gyro_notch_enabled ( ) ) {
AP_Param : : set_default_by_name ( " INS_HNTC2_MODE " , 0 ) ;
AP_Param : : set_default_by_name ( " INS_HNTC2_HMNCS " , 1 ) ;
}
2019-08-23 03:28:03 -03:00
}
2021-09-23 02:21:10 -03:00
// ACRO_RP_P and ACRO_Y_P replaced with ACRO_RP_RATE and ACRO_Y_RATE for Copter-4.2
const AP_Param : : ConversionInfo acro_rpy_conversion_info [ ] = {
{ Parameters : : k_param_acro_rp_p , 0 , AP_PARAM_FLOAT , " ACRO_RP_RATE " } ,
{ Parameters : : k_param_acro_yaw_p , 0 , AP_PARAM_FLOAT , " ACRO_Y_RATE " }
} ;
for ( const auto & info : acro_rpy_conversion_info ) {
AP_Param : : convert_old_parameter ( & info , 45.0 ) ;
}
2020-01-13 00:46:05 -04:00
// make any SRV_Channel upgrades needed
SRV_Channels : : upgrade_parameters ( ) ;
2012-02-12 07:26:36 -04:00
}
2018-11-09 02:36:42 -04:00
2021-02-06 23:29:33 -04:00
# if LANDING_GEAR_ENABLED == ENABLED
2018-11-09 02:36:42 -04:00
/*
convert landing gear parameters
*/
void Copter : : convert_lgr_parameters ( void )
{
// convert landing gear PWM values
uint8_t chan ;
if ( ! SRV_Channels : : find_channel ( SRV_Channel : : k_landing_gear_control , chan ) ) {
return ;
}
// parameter names are 1 based
chan + = 1 ;
char pname [ 17 ] ;
AP_Int16 * servo_min , * servo_max , * servo_trim ;
AP_Int16 * servo_reversed ;
enum ap_var_type ptype ;
// get pointers to the servo min, max and trim parameters
snprintf ( pname , sizeof ( pname ) , " SERVO%u_MIN " , chan ) ;
servo_min = ( AP_Int16 * ) AP_Param : : find ( pname , & ptype ) ;
snprintf ( pname , sizeof ( pname ) , " SERVO%u_MAX " , chan ) ;
servo_max = ( AP_Int16 * ) AP_Param : : find ( pname , & ptype ) ;
snprintf ( pname , sizeof ( pname ) , " SERVO%u_TRIM " , chan ) ;
servo_trim = ( AP_Int16 * ) AP_Param : : find ( pname , & ptype ) ;
2019-01-11 05:42:01 -04:00
snprintf ( pname , sizeof ( pname ) , " SERVO%u_REVERSED " , chan & 0x3F ) ; // Only use the 6 LSBs, avoids a cpp warning
2018-11-09 02:36:42 -04:00
servo_reversed = ( AP_Int16 * ) AP_Param : : find ( pname , & ptype ) ;
if ( ! servo_min | | ! servo_max | | ! servo_trim | | ! servo_reversed ) {
// this shouldn't happen
return ;
}
if ( servo_min - > configured_in_storage ( ) | |
servo_max - > configured_in_storage ( ) | |
servo_trim - > configured_in_storage ( ) | |
servo_reversed - > configured_in_storage ( ) ) {
// has been previously saved, don't upgrade
return ;
}
// get the old PWM values
AP_Int16 old_pwm ;
uint16_t old_retract = 0 , old_deploy = 0 ;
const AP_Param : : ConversionInfo cinfo_ret { Parameters : : k_param_landinggear , 0 , AP_PARAM_INT16 , nullptr } ;
const AP_Param : : ConversionInfo cinfo_dep { Parameters : : k_param_landinggear , 1 , AP_PARAM_INT16 , nullptr } ;
if ( AP_Param : : find_old_parameter ( & cinfo_ret , & old_pwm ) ) {
old_retract = ( uint16_t ) old_pwm . get ( ) ;
}
if ( AP_Param : : find_old_parameter ( & cinfo_dep , & old_pwm ) ) {
old_deploy = ( uint16_t ) old_pwm . get ( ) ;
}
if ( old_retract = = 0 & & old_deploy = = 0 ) {
// old parameters were never set
return ;
}
// use old defaults
if ( old_retract = = 0 ) {
old_retract = 1250 ;
}
if ( old_deploy = = 0 ) {
old_deploy = 1750 ;
}
// set and save correct values on the servo
if ( old_retract < = old_deploy ) {
servo_max - > set_and_save ( old_deploy ) ;
servo_min - > set_and_save ( old_retract ) ;
servo_trim - > set_and_save ( old_retract ) ;
servo_reversed - > set_and_save_ifchanged ( 0 ) ;
} else {
servo_max - > set_and_save ( old_retract ) ;
servo_min - > set_and_save ( old_deploy ) ;
servo_trim - > set_and_save ( old_deploy ) ;
servo_reversed - > set_and_save_ifchanged ( 1 ) ;
}
}
2021-02-06 23:29:33 -04:00
# endif
2019-02-27 20:03:24 -04:00
# if FRAME_CONFIG == HELI_FRAME
// handle conversion of tradheli parameters from Copter-3.6 to Copter-3.7
2021-02-01 12:26:21 -04:00
void Copter : : convert_tradheli_parameters ( void ) const
2019-02-27 20:03:24 -04:00
{
if ( g2 . frame_class . get ( ) = = AP_Motors : : MOTOR_FRAME_HELI ) {
// single heli conversion info
const AP_Param : : ConversionInfo singleheli_conversion_info [ ] = {
{ Parameters : : k_param_motors , 1 , AP_PARAM_INT16 , " H_SW_H3_SV1_POS " } ,
{ Parameters : : k_param_motors , 2 , AP_PARAM_INT16 , " H_SW_H3_SV2_POS " } ,
{ Parameters : : k_param_motors , 3 , AP_PARAM_INT16 , " H_SW_H3_SV3_POS " } ,
{ Parameters : : k_param_motors , 7 , AP_PARAM_INT16 , " H_SW_H3_PHANG " } ,
2019-03-17 00:04:13 -03:00
{ Parameters : : k_param_motors , 19 , AP_PARAM_INT8 , " H_SW_COL_DIR " } ,
2019-02-27 20:03:24 -04:00
} ;
2019-03-25 20:57:55 -03:00
// convert single heli parameters without scaling
2019-02-27 20:03:24 -04:00
uint8_t table_size = ARRAY_SIZE ( singleheli_conversion_info ) ;
for ( uint8_t i = 0 ; i < table_size ; i + + ) {
AP_Param : : convert_old_parameter ( & singleheli_conversion_info [ i ] , 1.0f ) ;
}
2019-07-26 10:37:00 -03:00
// convert to known swash type for setups that match
2019-09-06 12:13:12 -03:00
AP_Int16 swash_pos_1 , swash_pos_2 , swash_pos_3 , swash_phang ;
AP_Int8 swash_type ;
bool swash_pos1_exist = AP_Param : : find_old_parameter ( & singleheli_conversion_info [ 0 ] , & swash_pos_1 ) ;
bool swash_pos2_exist = AP_Param : : find_old_parameter ( & singleheli_conversion_info [ 1 ] , & swash_pos_2 ) ;
bool swash_pos3_exist = AP_Param : : find_old_parameter ( & singleheli_conversion_info [ 2 ] , & swash_pos_3 ) ;
bool swash_phang_exist = AP_Param : : find_old_parameter ( & singleheli_conversion_info [ 3 ] , & swash_phang ) ;
const AP_Param : : ConversionInfo swash_type_info { Parameters : : k_param_motors , 5 , AP_PARAM_INT8 , " H_SW_TYPE " } ;
bool swash_type_exists = AP_Param : : find_old_parameter ( & swash_type_info , & swash_type ) ;
if ( swash_type_exists ) {
// convert swash type to new parameter
AP_Param : : convert_old_parameter ( & swash_type_info , 1.0f ) ;
} else {
// old swash type is not in eeprom and thus type is default value of generic swash
if ( swash_pos1_exist | | swash_pos2_exist | | swash_pos3_exist | | swash_phang_exist ) {
// if any params exist with the generic swash then the upgraded swash type must be generic
// find the new variable in the variable structures
enum ap_var_type ptype ;
AP_Param * ap2 ;
ap2 = AP_Param : : find ( " H_SW_TYPE " , & ptype ) ;
// make sure the pointer is valid
if ( ap2 ! = nullptr ) {
// see if we can load it from EEPROM
if ( ! ap2 - > configured_in_storage ( ) ) {
// the new parameter is not in storage so set generic swash
AP_Param : : set_and_save_by_name ( " H_SW_TYPE " , SwashPlateType : : SWASHPLATE_TYPE_H3 ) ;
}
}
}
2019-07-26 10:37:00 -03:00
}
2019-02-27 20:03:24 -04:00
} else if ( g2 . frame_class . get ( ) = = AP_Motors : : MOTOR_FRAME_HELI_DUAL ) {
// dual heli conversion info
const AP_Param : : ConversionInfo dualheli_conversion_info [ ] = {
2019-09-12 17:08:43 -03:00
{ Parameters : : k_param_motors , 1 , AP_PARAM_INT16 , " H_SW_H3_SV1_POS " } ,
{ Parameters : : k_param_motors , 2 , AP_PARAM_INT16 , " H_SW_H3_SV2_POS " } ,
{ Parameters : : k_param_motors , 3 , AP_PARAM_INT16 , " H_SW_H3_SV3_POS " } ,
2019-02-27 20:03:24 -04:00
{ Parameters : : k_param_motors , 4 , AP_PARAM_INT16 , " H_SW2_H3_SV1_POS " } ,
{ Parameters : : k_param_motors , 5 , AP_PARAM_INT16 , " H_SW2_H3_SV2_POS " } ,
{ Parameters : : k_param_motors , 6 , AP_PARAM_INT16 , " H_SW2_H3_SV3_POS " } ,
2019-09-12 17:08:43 -03:00
{ Parameters : : k_param_motors , 7 , AP_PARAM_INT16 , " H_SW_H3_PHANG " } ,
2019-02-27 20:03:24 -04:00
{ Parameters : : k_param_motors , 8 , AP_PARAM_INT16 , " H_SW2_H3_PHANG " } ,
2019-09-12 17:08:43 -03:00
{ Parameters : : k_param_motors , 19 , AP_PARAM_INT8 , " H_SW_COL_DIR " } ,
2019-03-17 00:04:13 -03:00
{ Parameters : : k_param_motors , 19 , AP_PARAM_INT8 , " H_SW2_COL_DIR " } ,
2019-02-27 20:03:24 -04:00
} ;
// convert dual heli parameters without scaling
uint8_t table_size = ARRAY_SIZE ( dualheli_conversion_info ) ;
for ( uint8_t i = 0 ; i < table_size ; i + + ) {
AP_Param : : convert_old_parameter ( & dualheli_conversion_info [ i ] , 1.0f ) ;
}
2019-07-26 10:37:00 -03:00
2019-09-06 14:35:06 -03:00
// convert to known swash type for setups that match
AP_Int16 swash1_pos_1 , swash1_pos_2 , swash1_pos_3 , swash1_phang , swash2_pos_1 , swash2_pos_2 , swash2_pos_3 , swash2_phang ;
bool swash1_pos1_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 0 ] , & swash1_pos_1 ) ;
bool swash1_pos2_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 1 ] , & swash1_pos_2 ) ;
bool swash1_pos3_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 2 ] , & swash1_pos_3 ) ;
bool swash1_phang_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 6 ] , & swash1_phang ) ;
bool swash2_pos1_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 3 ] , & swash2_pos_1 ) ;
bool swash2_pos2_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 4 ] , & swash2_pos_2 ) ;
bool swash2_pos3_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 5 ] , & swash2_pos_3 ) ;
bool swash2_phang_exist = AP_Param : : find_old_parameter ( & dualheli_conversion_info [ 7 ] , & swash2_phang ) ;
// SWASH 1
// old swash type is not in eeprom and thus type is default value of generic swash
if ( swash1_pos1_exist | | swash1_pos2_exist | | swash1_pos3_exist | | swash1_phang_exist ) {
// if any params exist with the generic swash then the upgraded swash type must be generic
// find the new variable in the variable structures
enum ap_var_type ptype ;
AP_Param * ap2 ;
2019-09-12 17:08:43 -03:00
ap2 = AP_Param : : find ( " H_SW_TYPE " , & ptype ) ;
2019-09-06 14:35:06 -03:00
// make sure the pointer is valid
if ( ap2 ! = nullptr ) {
// see if we can load it from EEPROM
if ( ! ap2 - > configured_in_storage ( ) ) {
// the new parameter is not in storage so set generic swash
2019-09-12 17:08:43 -03:00
AP_Param : : set_and_save_by_name ( " H_SW_TYPE " , SwashPlateType : : SWASHPLATE_TYPE_H3 ) ;
2019-09-06 14:35:06 -03:00
}
}
}
//SWASH 2
// old swash type is not in eeprom and thus type is default value of generic swash
if ( swash2_pos1_exist | | swash2_pos2_exist | | swash2_pos3_exist | | swash2_phang_exist ) {
// if any params exist with the generic swash then the upgraded swash type must be generic
// find the new variable in the variable structures
enum ap_var_type ptype ;
AP_Param * ap2 ;
ap2 = AP_Param : : find ( " H_SW2_TYPE " , & ptype ) ;
// make sure the pointer is valid
if ( ap2 ! = nullptr ) {
// see if we can load it from EEPROM
if ( ! ap2 - > configured_in_storage ( ) ) {
// the new parameter is not in storage so set generic swash
AP_Param : : set_and_save_by_name ( " H_SW2_TYPE " , SwashPlateType : : SWASHPLATE_TYPE_H3 ) ;
}
}
2019-07-26 10:37:00 -03:00
}
2019-02-27 20:03:24 -04:00
}
2019-08-07 23:52:41 -03:00
// table of rsc parameters to be converted with scaling
const AP_Param : : ConversionInfo rschelipct_conversion_info [ ] = {
{ Parameters : : k_param_motors , 1280 , AP_PARAM_INT16 , " H_RSC_THRCRV_0 " } ,
{ Parameters : : k_param_motors , 1344 , AP_PARAM_INT16 , " H_RSC_THRCRV_25 " } ,
{ Parameters : : k_param_motors , 1408 , AP_PARAM_INT16 , " H_RSC_THRCRV_50 " } ,
{ Parameters : : k_param_motors , 1472 , AP_PARAM_INT16 , " H_RSC_THRCRV_75 " } ,
{ Parameters : : k_param_motors , 1536 , AP_PARAM_INT16 , " H_RSC_THRCRV_100 " } ,
{ Parameters : : k_param_motors , 448 , AP_PARAM_INT16 , " H_RSC_SETPOINT " } ,
{ Parameters : : k_param_motors , 768 , AP_PARAM_INT16 , " H_RSC_CRITICAL " } ,
{ Parameters : : k_param_motors , 832 , AP_PARAM_INT16 , " H_RSC_IDLE " } ,
} ;
// convert heli rsc parameters with scaling
uint8_t table_size = ARRAY_SIZE ( rschelipct_conversion_info ) ;
for ( uint8_t i = 0 ; i < table_size ; i + + ) {
AP_Param : : convert_old_parameter ( & rschelipct_conversion_info [ i ] , 0.1f ) ;
}
// table of rsc parameters to be converted without scaling
const AP_Param : : ConversionInfo rscheli_conversion_info [ ] = {
{ Parameters : : k_param_motors , 512 , AP_PARAM_INT8 , " H_RSC_MODE " } ,
{ Parameters : : k_param_motors , 640 , AP_PARAM_INT8 , " H_RSC_RAMP_TIME " } ,
{ Parameters : : k_param_motors , 704 , AP_PARAM_INT8 , " H_RSC_RUNUP_TIME " } ,
{ Parameters : : k_param_motors , 1216 , AP_PARAM_INT16 , " H_RSC_SLEWRATE " } ,
2019-02-15 21:52:09 -04:00
} ;
2019-08-07 23:52:41 -03:00
// convert heli rsc parameters without scaling
table_size = ARRAY_SIZE ( rscheli_conversion_info ) ;
2019-02-15 21:52:09 -04:00
for ( uint8_t i = 0 ; i < table_size ; i + + ) {
2019-08-07 23:52:41 -03:00
AP_Param : : convert_old_parameter ( & rscheli_conversion_info [ i ] , 1.0f ) ;
}
// update tail speed parameter with scaling
AP_Int16 * tailspeed ;
enum ap_var_type ptype ;
tailspeed = ( AP_Int16 * ) AP_Param : : find ( " H_TAIL_SPEED " , & ptype ) ;
if ( tailspeed ! = nullptr & & tailspeed - > get ( ) > 100 ) {
uint16_t tailspeed_pct = ( uint16_t ) ( 0.1f * tailspeed - > get ( ) ) ;
AP_Param : : set_and_save_by_name ( " H_TAIL_SPEED " , tailspeed_pct ) ;
2019-02-15 21:52:09 -04:00
}
2019-07-26 10:37:00 -03:00
2019-12-13 12:16:52 -04:00
// table of stabilize collective parameters to be converted with scaling
const AP_Param : : ConversionInfo collhelipct_conversion_info [ ] = {
{ Parameters : : k_param_input_manager , 1 , AP_PARAM_INT16 , " IM_STB_COL_1 " } ,
{ Parameters : : k_param_input_manager , 2 , AP_PARAM_INT16 , " IM_STB_COL_2 " } ,
{ Parameters : : k_param_input_manager , 3 , AP_PARAM_INT16 , " IM_STB_COL_3 " } ,
{ Parameters : : k_param_input_manager , 4 , AP_PARAM_INT16 , " IM_STB_COL_4 " } ,
} ;
// convert stabilize collective parameters with scaling
table_size = ARRAY_SIZE ( collhelipct_conversion_info ) ;
for ( uint8_t i = 0 ; i < table_size ; i + + ) {
AP_Param : : convert_old_parameter ( & collhelipct_conversion_info [ i ] , 0.1f ) ;
}
2019-02-27 20:03:24 -04:00
}
# endif
2019-09-21 21:09:18 -03:00
2021-02-01 12:26:21 -04:00
void Copter : : convert_fs_options_params ( void ) const
2019-09-21 21:09:18 -03:00
{
// If FS_OPTIONS has already been configured and we don't change it.
enum ap_var_type ptype ;
AP_Int32 * fs_opt = ( AP_Int32 * ) AP_Param : : find ( " FS_OPTIONS " , & ptype ) ;
if ( fs_opt = = nullptr | | fs_opt - > configured_in_storage ( ) | | ptype ! = AP_PARAM_INT32 ) {
return ;
}
// Variable to capture the new FS_OPTIONS setting
2020-12-08 01:39:11 -04:00
int32_t fs_options_converted = ( int32_t ) FailsafeOption : : GCS_CONTINUE_IF_PILOT_CONTROL ;
2019-09-21 21:09:18 -03:00
// If FS_THR_ENABLED is 2 (continue mission), change to RTL and add continue mission to the new FS_OPTIONS parameter
if ( g . failsafe_throttle = = FS_THR_ENABLED_CONTINUE_MISSION ) {
fs_options_converted | = int32_t ( FailsafeOption : : RC_CONTINUE_IF_AUTO ) ;
AP_Param : : set_and_save_by_name ( " FS_THR_ENABLE " , FS_THR_ENABLED_ALWAYS_RTL ) ;
}
// If FS_GCS_ENABLED is 2 (continue mission), change to RTL and add continue mission to the new FS_OPTIONS parameter
if ( g . failsafe_gcs = = FS_GCS_ENABLED_CONTINUE_MISSION ) {
fs_options_converted | = int32_t ( FailsafeOption : : GCS_CONTINUE_IF_AUTO ) ;
AP_Param : : set_and_save_by_name ( " FS_GCS_ENABLE " , FS_GCS_ENABLED_ALWAYS_RTL ) ;
}
// Write the new value to FS_OPTIONS
// AP_Param::set_and_save_by_name("FS_OPTIONS", fs_options_converted);
fs_opt - > set_and_save ( fs_options_converted ) ;
}