mateksys
74e7132bd3
hwdef: add MatekH7A3 readme.md
2024-04-11 10:17:17 +10:00
Hubert
4893f1303c
hwdef: correct hwdef for MicoAir405v2
...
Update hwdef: DMA allocation and LED mapping
Update README: UARTs DMA allocation
Update defaults.parm: GPS low baudrate
2024-04-10 21:55:01 +10:00
Andrew Tridgell
739d4a7fc8
hwdef: the RM3100 should run at max 1MHz on SPI bus
2024-04-10 21:40:51 +10:00
Alexis Guijarro
a50c19f622
mRo Control Zero Classic: Added ADC input for servo rail
2024-04-10 19:01:51 +10:00
Peter Barker
0e6bca92f7
AP_HAL_ChibiOS: remove redundant lines from hwdef files
2024-04-10 17:28:48 +10:00
Peter Barker
29149fad1b
hwdef: remove un-needed lines from CSKY405 hwdef
...
linting the hwdef showed this
2024-04-10 10:35:16 +10:00
Peter Barker
f16d0378e1
hwdef: compilation fix for CSKY405-fix
...
SCB-WAF: ../../libraries/AP_HAL/AP_HAL_Boards.h:372:2: error: #error "HAL_GPIO_LED_OFF must not be defined, it is implicitly !HAL_GPIO_LED_ON" 372 | #error "HAL_GPIO_LED_OFF must not be defined, it is implicitly !HAL_GPIO_LED_ON"
2024-04-10 10:35:16 +10:00
Andrew Tridgell
006d2c6cfe
hwdef: require bootloader for BotBloxSwitch
2024-04-10 09:59:14 +10:00
Peter Barker
27598d1026
AP_HAL_ChibiOS: add missing Math.h include
...
for "MIN"
2024-04-10 08:45:18 +09:00
Iampete1
73f4a47496
AP_HAL_ChibiOS: and `uart_log` method and stats struct
2024-04-09 10:00:50 +10:00
Iampete1
7dd2529683
AP_HAL_ChibiOS: UARTDriver: add getters for cumulative tx and rx counts
2024-04-09 10:00:50 +10:00
Peter Barker
ecf93f6d86
hwdef: remove redundant defines from hwdefs
...
this is set in the periph defaults file
2024-04-09 09:32:15 +10:00
Andy Piper
75978f9d6f
AP_HAL_ChibiOS: CB Unmanned Stamp H743
2024-04-09 09:26:40 +10:00
richaravoil
4cdca46a0c
hwdef: adding IMU lines for older version of board
2024-04-08 22:30:57 +10:00
Andy Piper
b9fede8a27
AP_HAL_ChibiOS: fixup FoxeerF405v2 build
2024-04-06 10:13:46 +11:00
Michael du Breuil
84cef5b786
AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts
2024-04-05 10:53:38 +11:00
AlexandrShipovsky
ace31e617e
AP_HAL_ChibiOS: add CSKY405 board
2024-04-05 10:45:00 +11:00
Andy Piper
fdce070f81
AP_HAL_ChibiOS: allow H7RF to build
2024-04-05 10:23:50 +11:00
Iampete1
edc12c2857
AP_HAL_ChibiOS: use new UART stats tracking helper moving history up to util
2024-04-03 13:10:06 +01:00
Andy Piper
b045939f1d
AP_HAL_ChibiOS: FoxeerF405v2
2024-04-03 18:50:52 +11:00
Peter Barker
47716e2338
hwdef: remove stray HAL_BUILD_AP_PERIPH defines
...
this is added by defaults_periph
2024-04-03 18:36:29 +11:00
Peter Barker
5fb4e1e285
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
2024-04-03 18:36:29 +11:00
Peter Barker
764f6863ea
hwdef: re-enable RCIN thread on some builds/boards
...
not because they need it, but to make a PR NFC
2024-04-03 18:36:29 +11:00
Peter Barker
994c268644
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
2024-04-03 18:36:29 +11:00
Henry Wurzburg
594c2466d8
HWDEF:revert copter only build on bds with integrated escs
2024-04-03 18:31:54 +11:00
Peter Barker
a65e06e0a9
AP_HAL_ChibiOS: move GPIO ON/off defaults from AP_HAL_ChibiOS to AP_HAL
...
these can be reused across different vehicles
2024-04-03 11:00:24 +11:00
Peter Barker
e1f3864349
hwdef: convert_betaflight_unified.py: don't set HAL_GPIO_LED_OFF
...
this value is the default value anyway, so don't make many copies..
2024-04-03 11:00:24 +11:00
Peter Barker
10627d296d
hwdef: remove HAL_GPIO lines which are simply the default values
...
... or the _OFF entry, which is simply !HAL_GPIO_MED_ON
2024-04-03 11:00:24 +11:00
Peter Barker
99dd85d51c
AP_HAL_ChibiOS: enforce HAL_GPIO_LED_OFF is not(HAL_GPIO_LED_ON)
...
the current "flexibility" allows for ON/OFF to be the same value.
Many hwdef files where only setting one of these, leaving the other at teh default, too....
2024-04-03 11:00:24 +11:00
mateksys
b904ab27f8
AP_HAL_ChibiOS: add MatekH7A3 defaults.parm
2024-04-02 15:29:55 +11:00
mateksys
4c3800c462
AP_HAL_ChibiOS: modify MatekH7A3 hwdef
2024-04-02 15:29:55 +11:00
Peter Barker
33e5b20709
hwdef: re-add ESC control to AP_Periph units which lost it
...
I'm quite sure that several of these don't actually want it, but want NFC
2024-04-02 11:28:27 +11:00
Peter Barker
416f7d393a
hwdef: remove DISABLE_SERIAL_ESC_COMM AP_Periph boilerplate
...
... use the defaults file instead
2024-04-02 11:28:27 +11:00
Peter Barker
f28cfc9a3b
hwdef: remove handling of FULL_CHIBIOS_BOOTLOADER directive
...
the string FULL_CHIBIOS_BOOTLOADER doesn't exist anywhere else in the source code
2024-04-02 11:20:48 +11:00
Henry Wurzburg
b83a895d7b
HWDEF: allow all build targets for non-integrated boarda
2024-04-02 10:17:21 +11:00
Peter Barker
8fc76e7455
hwdef: remove extraneous lines from hwdef files
...
these either come from includes are duplicated in these files
2024-03-26 11:09:03 +11:00
Peter Barker
395f438b42
chibios_hwdef.py: print error message if a define is re-defined at top level with same value
2024-03-26 11:09:03 +11:00
Peter Barker
eca2fd92b2
chibios_hwdef.py: correct extraction of intdefines
...
another regex problem
2024-03-26 11:09:03 +11:00
Peter Barker
1f3b4c47a0
hwdef: make a skyviper.inc, use it on skyviper-journey
2024-03-26 11:07:42 +11:00
Peter Barker
df19fed523
AP_HAL_ChibiOS: remove VRBrain board sub-types
...
these were only used to turn choose between AP_Notify LED backends, which can be done much more neatly with specific features defines.
2024-03-26 11:06:13 +11:00
Peter Barker
d663f14e3e
AP_HAL_ChibiOS: remove HAL_BOARD_SUBTYPE_CHIBIOS_FMUV4
...
this isn't used for anything
2024-03-26 10:59:23 +11:00
Peter Barker
813f0cf428
hwdef: remove save_some_flash.inc
...
all but one board was getting all of these includes from minimize_fpv_osd, and the remaining board had most lines foming from minimize_features.inc.
This file has served its purpose, its role now taken on by minimize_fpv_osd.inc
2024-03-24 20:15:53 +11:00
Peter Barker
85d25b205f
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
2024-03-23 22:04:34 +11:00
Peter Barker
5d369b2634
chibios_hwdef.py: correct extraction of intdefines from hwdef files
...
many of our hwdef files contain lines which look like this:
define STM32_PWM_USE_ADVANCED TRUE
The current regex does not allow for numbers in those define, so the regex ends up matching "STM" as a name....
the "intdefines" hash which is populated from these is only used internally to chibios_hwdey.py for logic purposes, not directly in hwdef output purposes, and none of the strings which it looks at contain numbers at the moment, so this is a non-functional change.
2024-03-23 15:23:08 +11:00
Andrew Tridgell
663a41a1f0
hwdef: probe external i2c compasses on MatekL431-GPS
2024-03-23 08:29:24 +11:00
Tim Tuxworth
f4d19275fc
Chibios: CubeRed - change NET_ENABLED to NET_ENABLE
2024-03-20 19:08:31 +11:00
Andy Piper
d2b50edf12
AP_HAL_ChibiOS: Orqa F405 Pro
2024-03-20 19:04:21 +11:00
Andrew Tridgell
d3a37d1357
HAL_ChibioOS: fixed FDCAN -> CAN labels
...
we use CAN1_RX not FDCAN1_RX in our MCU files
2024-03-20 14:26:23 +11:00
Alex P
4b082eb579
hwdef: added JHEMCUGF16F405
2024-03-19 19:53:03 +11:00
Wu
3fbf3368fc
AP_HAL_ChibiOS: added RadiolinkPIX6 support
2024-03-19 19:50:42 +11:00
Peter Barker
1d4e0a784c
AP_HAL_ChibiOS: rename GPS_ to GPS1_
2024-03-19 19:50:12 +11:00
Peter Barker
1ee7ef37ab
AP_HAL_ChibiOS: adjust for GPS parameter renames
2024-03-19 19:50:12 +11:00
Peter Barker
7ea2928e52
AP_HAL_ChibiOS: allow IOMCU to be turned off in includes
2024-03-18 09:57:12 +11:00
Andrew Tridgell
e983738c38
HAL_ChibiOS: fixed a cache corruption issue on H7
...
This fixes a bug introduced in this PR:
https://github.com/ArduPilot/ardupilot/pull/25900
the bug is that when we don't go via the bouncebuffer on H7 we were
also skipping the cache invalidate/flush ops. This caused data
corruption for filesystem operations, particularly noticible as lua
scripts failing to load with parse errors or log corruption
2024-03-16 21:57:33 +11:00
Andrew Tridgell
d1deb1c53b
hwdef: added MatekL431-HiRes build
2024-03-16 20:10:35 +11:00
Michelle Rossouw
533eb73622
hwdef: Make Crazyflie2 board only autobuild for Copter
2024-03-15 21:11:40 +11:00
Minderring
b316b3ab46
hwdef: added MicoAir405v2
2024-03-15 13:04:29 +11:00
Andy Piper
1e0d271fef
AP_HAL_ChibiOS: always normalize ESC channel when using iomcu
2024-03-14 06:40:04 +11:00
Tom Pittenger
9feccd6671
AP_HAL_Chibios hwdef script: remove h747 adc duplicate pin definitions
2024-03-13 18:52:05 +11:00
Randy Mackay
9b981cc7f3
AP_HAL_ChibiOS: CubeRedSecondary IMU orientation fix
...
Also remove duplicate RC_IN serial protocol
2024-03-13 18:51:18 +11:00
Patrick José Pereira
ce9fa18800
AP_HAL_ChibiOS: Use new default for reboot
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-03-12 21:13:41 +11:00
Andy Piper
3f681e4626
AP_HAL_ChibiOS: BlitzF745AIO update to ICM-42688
...
enable OSD
use minimal FPV config
enable compass probing
pull uart pins high in bootloader for ELRS
2024-03-12 09:26:58 +11:00
Peter Barker
96ee586eaa
AP_HAL_ChibiOS: move AC_Avoidance defines into libraries
2024-03-11 18:07:18 +11:00
jfbblue0922
7ba9030129
AP_HAL_ChibiOS/hwdef: add LED_SAFETY for JFB100 board definition
2024-03-06 18:52:35 +11:00
Peter Barker
b09dd7b866
AP_HAL_ChibiOS: move defaulting of HAL_WITH_ESC_TELEM for periph
2024-03-05 12:37:40 +11:00
subashchandar
7db7f95a3b
AP_HAL_ChibiOS: hwdef: Add new hardware pixflamingo f7
2024-03-04 23:26:50 +00:00
Peter Barker
077dd82bdc
AP_HAL_ChibiOS: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
Andy Piper
b248ba5f1b
AP_HAL_ChibiOS: provide start time and timeout to all dshot APIs that require it
...
correct timeout checking for dshot across timer wrap boundaries
fix trigger_groups timeout checks
use rcout_timer_t instead of uint32_t or uint64_t
2024-02-28 22:25:48 +11:00
Randy Mackay
fb5df80932
AP_HAL_ChibiOS: AP_Periph does not use AP_VisualOdom
2024-02-28 18:52:37 +11:00
Andy Piper
b359ec89a5
AP_HAL_ChibiOS: use standard FPV config for SpeedyBeeF405WING
2024-02-28 18:48:14 +11:00
jfbblue0922
dac1b2e99c
AP_HAL_ChibiOS/hwdef: update JFB110 board definition
2024-02-28 15:55:29 +09:00
Andy Piper
242f679206
AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot
...
add support for removing ROMFS from hwdef
2024-02-27 12:06:57 +11:00
Iampete1
d4daa990f8
AP_HAL_ChibiOS: hwdef.py: define `HAL_HAVE_AP_ROMFS_EMBEDDED_LUA` if lua files in ROMFS
2024-02-27 11:09:08 +11:00
Peter Barker
2e2b1c9fac
AP_HAL_ChibiOS: allow AP_TERRAIN_ENABLED to be turned off in hwdef
...
adds the ifndef, and changes things to the path defines are undefined if it is false
2024-02-27 11:04:02 +11:00
Peter Barker
df3267c9ba
waf: remove SKETCH and SKETCHNAME from build sysmte
...
... renaming one of them to AP_BUILD_TARGET
2024-02-26 15:42:25 +11:00
Peter Barker
3a38aeda59
AP_HAL_ChibiOS: set scheduler task to -4 when running callback tasks
2024-02-21 18:56:50 +11:00
Peter Barker
4113290153
AP_HAL_ChibiOS: remove HerePro
...
to be replaced by a HereProAP
2024-02-15 13:42:14 +11:00
Peter Barker
5d421e8ee3
AP_HAL_ChibiOS: allow AP_Periph to use mavlink library
2024-02-15 12:17:07 +11:00
Peter Barker
1862b5dc27
chibios_hwdef.py: allow re-use of bootloader from other boards
2024-02-10 21:41:30 +11:00
Andrew Tridgell
e8b4010899
HAL_ChibiOS: fixed CANFD timings (again!)
...
the timing table was not correct, thanks to APD for pointing this out.
This is recalculated from
https://www.kvaser.com/support/calculators/can-fd-bit-timing-calculator ,
with transmitter timing delay compensation added and tested with Salae
captures to ensure we are getting the right bit rates
2024-02-09 18:55:08 +11:00
bugobliterator
9919af69bc
AP_HAL_ChibiOS: add config to enable sccripting on CANMod
2024-02-07 18:31:02 +11:00
Henry Wurzburg
2729b11b2f
hwdef: add ASP5033 airspeed in minimal builds
2024-02-06 11:27:18 +11:00
Peter Barker
4c272d21ee
AP_HAL_ChibiOS: make compass.mag_cal_fixed_yaw return boolean
...
this method could be used from a transmitter without GCS enabled, for example
2024-02-06 11:11:27 +11:00
Peter Barker
9961e8c49d
hwdef: remove bad hwdef lines
...
these have no effect
2024-02-06 10:58:44 +11:00
Peter Barker
0d26118b12
hwdef: tidy AP_Radio includes
2024-02-05 09:26:14 +11:00
Andrew Tridgell
85439360d7
HAL_ChibiOS: fixed I2C4 on STM32G4
2024-02-05 07:36:14 +11:00
Andrew Tridgell
1e4f597e02
HAL_ChibiOS: fixed support for STM32H7A3
...
need to tell ChibiOS this is a newer H7
2024-02-03 08:36:18 +11:00
Peter Barker
a82b7f20c9
AP_HAL_ChibiOS: use HAL_LOGGING_ENABLED in place of HAL_BOOTLOADER_BUILD
...
bootloader already disables GCS, so we can rely on HAL_GCS_ENABLED in place of HAL_BOOTLOADER_BUILD
2024-02-02 19:21:58 +11:00
David O'Connor
078697c825
hwdef: add AnyLeaf H7 board
2024-02-01 11:43:57 +11:00
Leonardo Garcia
5749bd5074
AP_HAL_ChibiOS: mRo KitCAN revC board fix
...
Add RM3100 reversal mask to deal with M10025C board changes.
2024-02-01 11:43:35 +11:00
Andrew Tridgell
33f6a1d87e
hwdef: added MatekH7A3 support
2024-02-01 11:43:24 +11:00
Andrew Tridgell
054fb94e9a
HAL_ChibiOS: added support for STM32H7A3
...
interesting MCU as it is the first H7 we support that doesn't have a
128k flash sector size
2024-02-01 11:43:24 +11:00
Andrew Tridgell
3171b5321a
HAL_ChibiOS: support flash storage with 8k sectors
...
this allows for doubling up sectors to give an effective sector size
of 16k, allowing for flash storage with a useful storage size
2024-02-01 11:43:24 +11:00
Andrew Tridgell
07d0418cf9
HAL_ChibiOS: fixed flash support on H7 with 8k page size
...
the STM32H7A3xx has 8k pages
2024-02-01 11:43:24 +11:00
yjuav
8e71cf83cd
hwdef: add YJUAV_A6Ultra board support
2024-02-01 11:29:11 +11:00
Andrew Tridgell
30497244d9
HAL_ChibiOS: whitespace fixes
2024-01-30 12:32:23 +11:00
Andrew Tridgell
0a6057f2b3
HAL_ChibiOS: adjust clocks for H723 and H730
...
FDCAN clock must be 80MHz, and also align no-crystal clocks with
clocks for boards with crystals
2024-01-30 12:32:23 +11:00
Andrew Tridgell
aea2863141
hwdef: Added BotBloxSwitch
2024-01-30 12:32:23 +11:00
Andrew Tridgell
967af533b9
HAL_ChibiOS: fixed flash page count on H723
...
single bank H7 has 8 pages
2024-01-30 12:32:23 +11:00
Andrew Tridgell
4eaf5ef247
HAL_ChibiOS: support STM32H723 boards
2024-01-30 12:32:23 +11:00