Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
7,707 Commits 71 Branches 509 Tags 715 MiB
Commit Graph

2080 Commits

Author SHA1 Message Date
Andrew Tridgell 4236b10edc Copter: fixed board ID string 2013-01-02 10:18:05 +11:00
Andrew Tridgell 17a63dc76a Copter: fixes for AP_HAL merge 2013-01-02 09:55:55 +11:00
Andrew Tridgell 51d987a890 Copter: removed unusued variable 2013-01-02 09:55:55 +11:00
rmackay9 9b2956b377 ArduCopter: increase throttle rate P to 6.0 (was 1.0) and alt hold P to 2.0 (was 1.0) 2013-01-02 09:55:37 +11:00
rmackay9 228ad2198f ArduCopter: update firmware version to 2.9-rc2 2013-01-02 09:55:37 +11:00
rmackay9 2181ec2ab0 ArduCopter: log watchdog event to dataflash 2013-01-02 09:55:37 +11:00
rmackay9 16f99ebcab ArduCopter: fix to sub system used to record failsafe in dataflash ERR message 2013-01-02 09:55:37 +11:00
rmackay9 672fdfbf71 ArduCopter: added ERR dataflash message 
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
 2013-01-02 09:55:37 +11:00
rmackay9 677b38a48e ArduCopter: first implementation of surface tracking using sonar 
Note: not yet enabled as part of any flight mode
 2013-01-02 09:55:37 +11:00
rmackay9 92e271e517 AP_InertialNav: increase baro delay to 0.5 sec (was 0.2sec) to allow slower baro updates on APM1 2013-01-02 09:55:37 +11:00
rmackay9 d400e5040b ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner 2013-01-02 09:55:37 +11:00
rmackay9 daac540e08 ArduCopter: get_throttle_althold - add check to avoid divide by zero 2013-01-02 09:55:37 +11:00
rmackay9 0decd870dc ArduCopter: inertial nav - only initialise horizontal position when home is initialised 2013-01-02 09:55:37 +11:00
rmackay9 4c14010029 ArduCopter: update release notes for 2.9-rc1 2013-01-02 09:55:37 +11:00
rmackay9 576af6d487 ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan. 2013-01-02 09:55:37 +11:00
rmackay9 02bf3ea027 ArduCopter: Battery failsafe triggers RTL only if we are more than 15m from home, otherwise it performs a LAND 2013-01-02 09:55:37 +11:00
rmackay9 ff40fa6aab ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate 
Bug fix from Leonard.
 2013-01-02 09:55:37 +11:00
rmackay9 68b62abd38 ArduCopter with the new Camera and Relay classes for APM1 and APM2. 
All changes by Sandro Benigno
 2013-01-02 09:55:37 +11:00
rmackay9 393c893cdb ArduCopter: bug fix (attempt #2) for accel based throttle controller 
Thanks to Jonathan for this.
 2013-01-02 09:25:58 +11:00
rmackay9 e583ade62d ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s) 2013-01-02 09:24:31 +11:00
rmackay9 e77b54c7dc ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete. 2013-01-02 09:24:31 +11:00
rmackay9 e850ab7ccd ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes 2013-01-02 09:24:31 +11:00
Craig@3DR 0ed25cf719 Global change all references from 
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
 2013-01-02 09:24:31 +11:00
rmackay9 5526ca204c ArduCopter: on throttle failsafe, only initiate RTL if we are at least 15m from home 2013-01-02 09:22:51 +11:00
rmackay9 466097b383 ArduCopter: use inertial nav for current altitude and climb rate 2013-01-02 09:22:51 +11:00
rmackay9 5ba363b007 ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running 
Also removed redundant heartbeat message
 2013-01-02 09:21:35 +11:00
rmackay9 331a73c4ac ArduCopter: remove duplicate (?) send of MSG_EXTENDED_STATUS1 2013-01-02 09:20:08 +11:00
rmackay9 6baddf4aee ArduCopter: remove unused variable last_5hz 2013-01-02 09:20:08 +11:00
rmackay9 1f5fdcdaa8 ArduCopter: remove unnecessary "Initialising APM message..." 2013-01-02 09:20:08 +11:00
Jason Short 8b62c4630b ACM: Restore Multi-mode support 2013-01-02 09:20:08 +11:00
rmackay9 bd0e018ca0 ArduCopter: restore auto-trim method but now use AHRS.add_trim 2013-01-02 09:20:08 +11:00
Craig@3DR e350bfbba8 Removed 2 more degree symbols from comments 2013-01-02 09:20:08 +11:00
rmackay9 b786cf40f7 ArduCopter: change GPS dataflash message to output unfiltered gps lat and lon 2013-01-02 09:19:39 +11:00
rmackay9 d3cbf733ba ArduCopter: ensure RTL performs a land if a failsafe has been triggered 2013-01-02 09:19:39 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code. 
Protected behind a #define
 2013-01-02 09:19:39 +11:00
rmackay9 0fa6fdf407 ArduCopter: remove unused wait_for_yes function 2013-01-02 09:19:39 +11:00
rmackay9 e6519330f4 ArduCopter: remove unused rc_override variables to save 21 bytes 2013-01-02 09:19:17 +11:00
rmackay9 396024e802 ArduCopter: move scaleLongUp and scaleLongDown initialisation to init_home 2013-01-02 09:19:17 +11:00
rmackay9 7a5e4b8549 ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log 2013-01-02 09:19:17 +11:00
rmackay9 1b5ff6aac6 ArduCopter: restore initial climb to RTL 2013-01-02 09:19:17 +11:00
rmackay9 52802cb29e ArduCopter: limit output throttle to 800 only for TRI which does not have the new stability patch 2013-01-02 09:19:17 +11:00
rmackay9 34e18ae12a ArduCopter: increase accel based throttle PIDs and add D term to rate based throttle 2013-01-02 09:19:17 +11:00
rmackay9 ac8af9a53f ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate 
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
 2013-01-02 09:19:17 +11:00
rmackay9 f4c50353b9 ArduCopter: allow tuning of the Throttle Rate D term 2013-01-02 09:16:48 +11:00
Robert Lefebvre 9605bd8ee1 ACM: Trying to set a default MPU6K filter rate of 10Hz for TradHeli. Doesn't Work. 2013-01-02 09:14:55 +11:00
rmackay9 d926360e81 ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts 2013-01-02 09:14:31 +11:00
rmackay9 881dae1e27 ArduCopter: remove throttle limit of 800 for quads, hexas and octacopters 
Note: Y6 and OctaQuads still have the 800 limit because they do not have the latest stability patch
 2013-01-02 09:13:42 +11:00
rmackay9 6da68c53a5 ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled 2013-01-02 09:13:42 +11:00
rmackay9 d8e3d5c10c ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h 2013-01-02 09:12:40 +11:00
rmackay9 5633164fa0 ArduCopter: bug fix for compass.accumulate check in main loop (millis vs micros issue) 2013-01-02 09:12:40 +11:00
rmackay9 50d46898fb ArduCopter: allow GUIDED mode roll-pitch, yaw and throttle control modes to be overridden 2013-01-02 09:12:17 +11:00
rmackay9 ddc578fd18 ArduCopter: restore YAW to default AUTO_YAW mode instead of YAW_LOOK_AT_NEXT_WP mode 2013-01-02 09:12:17 +11:00
rmackay9 0ab82f8c4e ArduCopter: clear ahrs roll and pitch trims after an accel level command 2013-01-02 09:12:17 +11:00
rmackay9 7ea34d4fb7 ArduCopter: updated accel based throttle to use ahrs's get_accel_ef method 
Also removed slow low pass filter meant to correct for accelerometer calibration.  This is no longer required now that we have the improved calibration method.
 2013-01-02 09:11:25 +11:00
rmackay9 4dfe3a2d73 ArduCopter: remove weird character from navigation.pde 2013-01-02 09:11:25 +11:00
Robert Lefebvre ab95f04a91 ACM: TradHeli 
Change name of attitude rate feed-forward parameters.
 2013-01-02 09:10:40 +11:00
rmackay9 8e032b89ee ArduCopter: create 2.9 branch and update firmware version 2013-01-02 09:10:40 +11:00
Andrew Tridgell cf8e648558 CLI: fixed accel setup 
disable mavlink callback in CLI
 2012-12-24 08:51:33 +11:00
Andrew Tridgell 9931009db2 Math: use pythagorous2() in some more places 2012-12-20 15:16:18 +11:00
Andrew Tridgell 78d98023f4 Copter: remove use of 'byte' 2012-12-20 14:58:07 +11:00
Pat Hickey 1878290510 ArduCopter: fixes for AP_InertialSenor_UserInteract 2012-12-20 14:53:23 +11:00
Andrew Tridgell 3c0440b0b4 Math: use common degrees() and radians() functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell 06357c40f2 Copter: use new functions 2012-12-20 14:53:22 +11:00
Pat Hickey 2ad4fed8cd Rover/Copter/Plane: change from vsnprintf to vsnprintf_P 2012-12-20 14:52:38 +11:00
Pat Hickey 54b98c0a7c ArduPlane: use hal's vsnprintf 2012-12-20 14:52:37 +11:00
Andrew Tridgell a02f723f3a Copter: fixed HIL builds 2012-12-20 14:52:37 +11:00
Andrew Tridgell 2e8e84ba8b Copter: switch to using targets.mk 2012-12-20 14:52:36 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell 9e986801c9 Copter: fixed SITL for ArduCopter 2012-12-20 14:52:34 +11:00
Andrew Tridgell 08b1c2d590 Copter: fixed GPS init 2012-12-20 14:52:33 +11:00
Pat Hickey 9a28ed2df6 ArduCopter: refactor Makefile targets in terms of Arduino.mk targets 2012-12-20 14:52:31 +11:00
Andrew Tridgell 7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Pat Hickey 22ac39a4ef ArduCopter: disable and remove InertialNav defines from APM_Config 
* We're not going to have the RAM available to support those in general release
 2012-12-20 14:52:29 +11:00
Pat Hickey d5d97be837 ArduCopter: add param loader properly implement parameters 
* thanks tridge!
 2012-12-20 14:52:29 +11:00
Pat Hickey 5e63491994 ArduCopter: fix issues with HAL/HIL mixup and baro/compass instances 2012-12-20 14:52:29 +11:00
Pat Hickey 21d0da84a6 ArduCopter: temporarily disable AP_Param::setup_sketch_results 
* rebased away tridge's AP_Param changes as they seemed possibly buggy?
 2012-12-20 14:52:29 +11:00
Pat Hickey a0151aa66c ArduCopter: fix cliSerial null ptr, do AP_Param::setup_sketch_defaults 
* plus make SITL DataFlash available.
 2012-12-20 14:52:29 +11:00
Pat Hickey 1e48d0fc69 Makefile Targets rewritten to use per-target extension style 2012-12-20 14:52:29 +11:00
Pat Hickey 524e52f449 ArduCopter: changed makefile to inherit environments properly 2012-12-20 14:52:29 +11:00
Pat Hickey d93d932831 ArduCopter: defines fixes 
Conflicts:

	libraries/AP_Common/Arduino.mk
 2012-12-20 14:52:28 +11:00
Pat Hickey 2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey ade7099d75 ArduCopter: add AP_HAL_MAIN 2012-12-20 14:52:28 +11:00
Pat Hickey 5bd7046a95 ArduCopter: sketch cpp builds! 2012-12-20 14:52:28 +11:00
Pat Hickey 8b49208771 ArduCopter: some fixes 2012-12-20 14:52:28 +11:00
Pat Hickey 13c044ab3e ArduCopter: fixes to radio.pde 2012-12-20 14:52:28 +11:00
Pat Hickey 7af03127f6 ArduCopter: more work 2012-12-20 14:52:28 +11:00
Pat Hickey b90889dd11 ArduCopter: add ArduPlane's compat.h & compat.pde 2012-12-20 14:52:28 +11:00
Pat Hickey 70f4739522 ArduCopter: more fixes 2012-12-20 14:52:28 +11:00
Pat Hickey 4b84e99f85 remove dumb user hooks comments 2012-12-20 14:52:28 +11:00
Pat Hickey 901c692ee3 arducopter: type fix 2012-12-20 14:52:28 +11:00
Pat Hickey f281d9265e ArduCopter: reworked sonar analog source creation 2012-12-20 14:52:28 +11:00
Pat Hickey d9e0bbbbab ArduCopter: first pass at AP_HAL porting 
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
 2012-12-20 14:52:27 +11:00
Pat Hickey b7a7eceef8 ArduCopter: add nocore.inoflag and Arduino.h 2012-12-20 14:51:40 +11:00
Pat Hickey ada10f6eb2 ArduCopter: change comment references to AP_Var to AP_Param 
* jsut to clean up the grep for "AP_Var"
 2012-12-20 14:51:31 +11:00
Pat Hickey a4f1f6a5db AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR 2012-12-20 14:51:28 +11:00
Pat Hickey 3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches 
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
 2012-12-20 14:51:19 +11:00
Jason Short 0419dc8dfd ACM: Simplified control mode code 2012-12-14 13:30:48 -08:00
Jason Short 19ae5c30eb ACM : Formatting 2012-12-13 20:12:39 -08:00
rmackay9 52177c63f7 ArduCopter: only attempt to change settings of optical flow sensor if it has been successfully initialised 2012-12-11 00:14:29 +09:00
rmackay9 af77425636 ArduCopter: fix Failed to Init Optflow message at startup 2012-12-11 00:09:45 +09:00
rmackay9 2f748f8382 ArduCopter: renamed BATT_FAILSAFE to FS_BATT_ENABLE 2012-12-10 23:47:14 +09:00
rmackay9 d31efebd44 ArduCopter: rename throttle failsafe parameters. 
Switch to LAND flight mode if throttle failsafe triggers and we do not have a GPS.
THR_FAILSAFE renamed to FS_THR_ENABLE.
THR_FS_VALUE renamed to FS_THR_VALUE.
THR_FS_ACTION removed (action is now controlled by setting FS_THR parameter).
 2012-12-10 23:38:43 +09:00
rmackay9 2f1b2b70e6 ArduCopter: added ACRO_TRAINER parameter to allow enabling/disabling the acro training function which will bring the roll back to within +- 45 degrees 2012-12-10 22:27:46 +09:00
rmackay9 dadad8677e ArduCopter: added descriptions for most parameters that did not have them 
Renamed loiter_radius to circle_radius to better reflect it's purpose.
Removed some unused parameters including WP_MODE, WP_MUST_INDEX, LOG_LASTFILE, AXIS_P
 2012-12-10 21:45:57 +09:00
rmackay9 f522ef078e ArduCopter: remove unused functions do_target_yaw, do_loiter_at_location, get_altitude_error and clear_new_altitude 2012-12-10 17:30:50 +09:00
rmackay9 047f848cc7 ArduCopter: remove ThirdOrderCompFilter from list of includes 2012-12-10 09:14:44 +09:00
rmackay9 154e3c33f7 ArduCopter, AP_InertialNav: consolidated ThirdOrderComplementaryFilter into AP_InertialNav to save about 200bytes of RAM 2012-12-10 00:43:11 +09:00
rmackay9 cfe2507c0b ArduCopter: reduce Rate Roll/Pitch P to 0.150 (was 0.175) and increase I to 0.1 (was 0.01) 2012-12-09 18:08:45 +09:00
rmackay9 56ceb230cb ArduCopter: add YAW_OVR_BEHAVE to allow control of when autopilot takes back control of yaw after pilot overrides it during a mission 2012-12-09 18:04:31 +09:00
rmackay9 0f7bb79d89 ArduCopter: add comments to tuning parameters. 
Use RC_CHANNEL types as defined by RC_Channel library.
Remove unused definitions.
 2012-12-09 16:44:42 +09:00
rmackay9 9a05d3bd36 ArduCopter: add comments at the top of many navigation functions 2012-12-09 15:50:50 +09:00
rmackay9 8c2423f618 ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde 2012-12-09 15:24:19 +09:00
rmackay9 b36eb406d4 ArduCopter: allow alt hold to be engaged with alt < 1m because sometimes we get baro drift. 
Also initialisation of target altitude is done in set_throttle_mode function.
 2012-12-09 14:48:01 +09:00
rmackay9 b4e5176e2a ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 2012-12-09 14:27:33 +09:00
Robert Lefebvre aa4d4f8c24 ACM: Adding Pre-Compiler Define for Stabilize Throttle Mode. 2012-12-08 20:41:05 -05:00
Robert Lefebvre 0eb57bf93d ACM: TradHeli 
Fix to make update_throttle_cruise work with stab_throttle scaling.
 2012-12-08 15:12:39 -05:00
Robert Lefebvre 1b97a92098 ACM: Code Cleanup 2012-12-08 14:49:38 -05:00
rmackay9 f98a807d36 ArduCopter: remove debug related to yaw mode used for alt hold 2012-12-08 14:24:50 +09:00
rmackay9 9dd978576b ArduCopter: auto yaw changes to allow pilot override of yaw during missions 
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw).  We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
 2012-12-08 14:23:32 +09:00
rmackay9 85c8bdce15 ArduCopter: removed unused and out-of-date #defines from APM_Config.h 2012-12-08 13:38:39 +09:00
rmackay9 68ca123224 ArduCopter: remove some unused #defines 2012-12-07 15:17:35 +09:00
rmackay9 99b32a39c4 ArduCopter: InertialNav time constant CH6 tuning changed to only update enabled axis 2012-12-07 13:01:40 +09:00
rmackay9 cca9f9dbce ArduCopter: do_set_servo fix to resolve -1 being assigned to uint8_t 2012-12-07 12:58:44 +09:00
rmackay9 3a90fc77f9 ArduCopter: add dataflash logging of camera events 2012-12-07 00:57:08 +09:00
rmackay9 d74cf54b5d ArduCopter: allow triggering of camera from a mission 2012-12-06 23:48:30 +09:00
rmackay9 d3de77f74c ArduCopter: fix do_set_servo so that it works again 2012-12-06 20:18:33 +09:00
rmackay9 653535b9a1 ArduCopter: added CH7 option to trigger camera 
Restructured reading of channel 7 into a switch statement.
 2012-12-06 17:47:01 +09:00
rmackay9 4ca27defb3 ArduCopter: update comments related to CH7 switch options 2012-12-06 17:40:36 +09:00
rmackay9 75401756f2 ArduCopter: maintain loiter control even below 1m while landing 2012-12-06 12:40:53 +09:00
rmackay9 2dd4694eef ArduCopter: adjusted pid_throttle_accel dt to 0.01 (100hz) 2012-12-06 10:32:12 +09:00
rmackay9 269e02ee93 ArduCopter: bug fix - initialise inertial nav 2012-12-06 10:32:07 +09:00
rmackay9 8d682b9812 ArduCopter: disable INERTIAL_NAV_XY by default 2012-12-06 10:32:02 +09:00
rmackay9 39d524212f ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter. 
When disabled the original velocity based throttle controller is used.
 2012-12-06 10:31:57 +09:00
rmackay9 a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor 
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
 2012-12-06 10:31:52 +09:00
rmackay9 6da07ef1d2 ArduCopter: increase CONTROL_SWITCH_COUNTER so that flight mode switch must be changed for at least 1/10th of a second 2012-12-06 10:31:46 +09:00
rmackay9 072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 aa5e7e63a0 ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE) 2012-12-06 10:31:36 +09:00
rmackay9 bdb47c449a ArduCopter: pass linear altitude error to throttle rate controllers. 
Previously the requested rate used the square root of the altitude error.

Scale pilot's desired vertical rate and acceleration based on ACCELERATION_MAX_Z and VELOCITY_MAX_Z #defines
 2012-12-06 10:31:31 +09:00
rmackay9 d7f76ebd87 ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI) 2012-12-06 10:31:25 +09:00
rmackay9 7b4ed2d227 ArduCopter: restored landing detector to landing throttle mode. 
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
 2012-12-06 10:31:20 +09:00
rmackay9 560bb1d738 ArduCopter: removed unused AUTO_THROTTLE_HOLD #define 2012-12-06 10:31:15 +09:00
rmackay9 7035529953 ArduCopter: remove unused get_desired_climb_rate function 2012-12-06 10:31:09 +09:00
rmackay9 a94826f182 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9 1036b35128 ArduCopter: added back in angle boost and recombined for heli and multicopter 2012-12-06 10:30:55 +09:00
rmackay9 3cbef57c64 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy 
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
 2012-12-06 10:30:49 +09:00
Robert Lefebvre 8c18a60766 ACM: Small fix to Yaw Look Ahead 2012-12-04 14:50:14 -05:00
Robert Lefebvre 1d589c0b7d ACM: TradHeli 
Fixes for Attitude rate controllers.
 2012-12-04 14:42:04 -05:00
Robert Lefebvre 5723021be1 ACM: TradHeli 
Creating Rate Feed-Forward Parameters
 2012-12-04 13:47:38 -05:00
Robert Lefebvre 3e65dd3ded ACM: TradHeli APM_Config.h changes 2012-12-04 13:32:40 -05:00
Robert Lefebvre 315a7e8000 ACM: Yaw Look Ahead Changes 2012-12-04 13:26:41 -05:00
Robert Lefebvre 9130045298 ACM: Code Cleanup 2012-11-30 17:05:12 -05:00
rmackay9 8141f0b600 ArduCopter: bug fix - increase mpu6k sample rate to 100hz 2012-11-30 23:49:18 +09:00
Andrew Tridgell 6fbf5ec8f2 Copter: update ArduCopter for new ins interface 2012-11-30 07:15:18 +11:00
Michael Oborne 68aa5e4682 AC add ability to start new accel_scale via mavlink 2012-11-28 21:38:58 +08:00
Andrew Tridgell 2949d58b71 Copter: re-enable sending of GLOBAL_POSITION_INT message 
this gives important raw GPS velocity information, plus relative and
absolute height
 2012-11-28 11:26:19 +11:00
Robert Lefebvre 07d7d90882 ACM: TradHeli 
Bringing in Low Pass Filter for Rate Controllers
 2012-11-26 21:51:23 -05:00
Robert Lefebvre 6b8c39dd10 ACM: Creating Yaw_Look_Ahead yaw mode. 
This function is not fully tested yet.
 2012-11-26 21:37:13 -05:00
Robert Lefebvre 3f0e8dd358 ACM: TradHeli 
Bringing in Low Pas Filter
Commented out because it does not build.
Needs updates to Low Pass Filter Lib
 2012-11-26 21:21:12 -05:00
Robert Lefebvre e8d619acad ACM: Begin creation of TradHeli rate control. 
May affect Multi-Rotors.
 2012-11-26 21:02:41 -05:00
Robert Lefebvre 6b1fee767a ACM: TradHeli 
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
 2012-11-26 19:37:20 -05:00
Robert Lefebvre 9e45e906fb ACM: TradHeli 
Move some TradHeli #defines into one place in APM_Config to clean up config.h and defines.h
 2012-11-26 19:09:55 -05:00
Robert Lefebvre b32d7c8b63 ACM: TradHeli 
Prevent helis from arming while RSC control is switched on.
 2012-11-26 19:03:28 -05:00
Robert Lefebvre 95eeda7cf7 ACM: TradHeli 
Removing Angle Boost function.
Does not make sense for helis due to aerodynamics.  Can cause more problems than it solves.
 2012-11-26 18:58:21 -05:00
Robert Lefebvre 8056b78c55 ACM: TradHeli 
Remove Rate I-term reset when throttle stick is on the bottom.  This could be very bad for helis since it's plausible to use full downstick while flying.
There is obviously a risk here of building up a false I-term on the ground but this isn't a good solution for that anyway.
Also removed what appears to be some deadwood.
 2012-11-26 18:49:24 -05:00
Robert Lefebvre 637c9a1a72 ACM: TradHeli 
Removing this "throttle" output restriction for TradHelis.
 2012-11-26 18:44:03 -05:00
Andrew Tridgell 5818aaad42 Copter: fixed build error 
thanks to Marco for pointing this out
 2012-11-24 20:39:35 +11:00
Andrew Tridgell f6ec932d63 Copter: added reboot in CLI and over MAVLink 
useful for getting out of CLI
 2012-11-24 18:20:37 +11:00
Andrew Tridgell cd07d965a7 Copter: ported RSSI_PIN option from ArduPlane 
this is useful for OSD users
 2012-11-22 20:59:33 +11:00
rmackay9 3372355e07 ArduCopter: remove commented out remnants of roll_scale_d and pitch_scale_d 2012-11-22 12:50:39 +09:00
rmackay9 eb6d8fca57 ArduCopter: added ReleaseNotes.txt 2012-11-22 09:51:04 +09:00
Robert Lefebvre 6ffc115236 Changes to get_throttle_rate() 
Commented out a bit of code that is not used currently
Change the output constrains to #defines so they can be easily changed, particularly for use in TradHeli.
 2012-11-21 17:11:38 -05:00
Andrew Tridgell dbdb3e1194 ACM: allow fetch of parameters by index 
this makes it more efficient to re-fetch parameters that are missing
 2012-11-22 00:16:57 +11:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
Andrew Tridgell 704da2a5d9 MAVLink: make it possible to enter the CLI over the radio 
this only works on the APM2, where UART0 is also the radio port
 2012-11-21 14:11:05 +11:00
Michael Oborne a5e3ce4655 remove cli planner mode - no longer used 2012-11-21 07:45:45 +08:00
Michael Oborne 0c84b8abf1 fix unit max. and unit type 2012-11-21 07:42:53 +08:00
Andrew Tridgell bcf740a82f ACM: support 16 character parameter names 2012-11-20 21:38:58 +11:00
Andrew Tridgell c008ca7560 ACM: fixed documentation of disabling voltage/current pins for ArduCopter 2012-11-20 20:26:14 +11:00
Andrew Tridgell 69fbcc8683 MAVLink: fixed accel and gyro sensor offsets in MAVLink 2012-11-20 18:32:26 +11:00
rmackay9 810da878e7 ArduCopter: performance monitoring - changed loop counters to uint16_t. 
Removed an unused items from dataflash logging of Performance.
 2012-11-19 11:55:47 +09:00
Andrew Tridgell dafaa2efc8 SITL: disable optical flow on the desktop build 
it doesn't work yet, as no sensor emulator is available
 2012-11-19 09:04:03 +11:00
Andrew Tridgell a3c3c59b82 ACM: fixed some memory cast warnings 2012-11-19 08:42:36 +11:00
rmackay9 07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls 
improved performance logging to dataflash
 2012-11-19 01:16:07 +09:00
Andrew Tridgell 531e62d3b5 MAVLink: improve usefulness of logged GPS velocities 
we need them to align with time to use them for accelerations
 2012-11-17 17:45:30 +11:00
Jason Short 5f57678a9c ACM Nav_throttle- removed sign inversion 2012-11-16 17:38:57 -08:00
Robert Lefebvre 9c6e914bf8 Added Leonard to Contributor List. 2012-11-16 15:43:03 -05:00
rmackay9 e92b560df5 ArduCopter: low baterry failsafe 2012-11-15 23:35:41 +09:00
rmackay9 73ed6c9dbf ArduCopter, APM_RC: failsafe if PPM encoder fails to update for 2 seconds 2012-11-15 23:35:36 +09:00
rmackay9 258442770d ArduCopter: flight mode changes ignored while in throttle failsafe 
reaction time to flight mode changes (when not in failsafe) reduced from 0.6 seconds to 0.1 seconds
 2012-11-13 12:50:51 +09:00
rmackay9 cdfd3f9ccc ArduCopter, ArduPlane: rename ap variable in GCS_Mavlink.pde to resolve compiler warning re shadowing of variable 'ap' 
Changed ArduPlane to keep function consistent with ArduCopter
 2012-11-12 13:30:04 +09:00
rmackay9 dcd98eee78 ArduCopter: remove some variables no longer required with introduction of AP_state 2012-11-12 12:41:25 +09:00
rmackay9 ac5dcc8d49 ArduCopter: remove last remanants of rate_d to resolve compiler warning of unused variables 2012-11-12 12:35:58 +09:00
Jason Short ea7f639ebf ACM: Added fast descent with Bill P's equation for managed accerlation 2012-11-11 18:23:45 -08:00
Jason Short 69db678252 ACM: attitude.pde - adjusted the FF of the alt hold algorithm, the old way was pretty crap. increased the output range of rate controller. 2012-11-11 18:22:54 -08:00
Jason Short c1b759d5d8 ACM: Added a speed filter for throttle cruise, increased alt change rate for alt hold, increased the max climb_rate reporting 2012-11-11 18:17:33 -08:00
Jason Short f344eb875a ACM: Allow greater than 45° pitch and roll in Stab 2012-11-11 18:07:58 -08:00
Jason Short be63481a8c ACM : Logging.pde formatting 2012-11-11 18:06:50 -08:00
Jason Short 9e0b0b9fcd ACM : loging ApState at faster rate 2012-11-11 18:00:10 -08:00
Jason Short 9735a0eff1 ACM: Allow for user defined roll and pitch input max 2012-11-11 18:00:10 -08:00
Andrew Tridgell fddfb0b1a3 MAVLink: update compass health in SYS_STATUS 
this will make it easier to tell if a I2C error occurred in flight
 2012-11-12 11:26:54 +11:00
rmackay9 bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00
rmackay9 e212744f4c ArduCopter: failsafe improvements 
resolves momentary throttle drop to zero before failsafe engages
resolves motor cut after 30seconds if flying in stabilize without GPS (now switches to ALT_HOLD with target altitude zero)
disables motors if throttle was zero before failsafe event
 2012-11-11 22:11:12 +09:00
rmackay9 96872493ae ArduCopter: remove unnecessary debug print mesage from save_trim function 2012-11-10 23:10:29 +09:00
rmackay9 95f6357d35 ArduCopter: fix APM2 build 2012-11-10 22:06:23 +09:00
Jason Short 883bb7cfc0 ACM formatting 2012-11-09 22:15:16 -08:00
Jason Short fb2180ddcd ACM : climb rate option using Bill P's equation 2012-11-09 22:15:16 -08:00
Jason Short 129ec35c35 ACM crosstrack min distance 2012-11-09 22:15:16 -08:00
Jason Short 4b5e0a5046 ACM Logging Events 2012-11-09 22:15:16 -08:00
Jason Short 6dba79e3a7 ACM Log, formatting 2012-11-09 22:15:16 -08:00
Jason Short 549489ddbb ACM : Setup, format 2012-11-09 22:15:16 -08:00
Jason Short ecdc281315 ACM | removing old files 2012-11-09 22:15:16 -08:00
Jason Short d2a5928c06 Ap state updates 2012-11-09 22:15:15 -08:00
Jason Short 4d7b9137fe ACM: Added max RTL altitude 2012-11-09 22:15:15 -08:00
Jason Short bfca0ff9bc ACM: added ap_state.pde 2012-11-09 22:15:15 -08:00
Jason Short 5ad38a32bf ACM : Attitude : added nav param reset 2012-11-09 22:15:15 -08:00
Jason Short 3c78c4a7a3 ACM : Attitude.pde added ap bitfield for failsafe bit 2012-11-09 22:15:15 -08:00
Jason Short a42c6bb609 ACM : Attitude.pde removed stabilize D 2012-11-09 22:15:15 -08:00
Jason Short e4cec91e59 ACM : Arducopter Added ap state bitfield, system bitfield 2012-11-09 22:15:15 -08:00
Jason Short cdabc3878b ACM: Arducopter - remove the stabilize D scheduling 2012-11-09 22:15:15 -08:00
Jason Short d2a0913b2d ACM : formatting 2012-11-09 22:15:15 -08:00
rmackay9 2b714ff7b0 ArduCopter: remove unused functions wrap_360f, wrap_180f and wrap_PI 2012-11-08 15:20:08 +09:00
rmackay9 14cbe37d3e ArduCopter: remove unused get_stabilize_rate_yaw 2012-11-07 23:28:25 +09:00
rmackay9 b13264c884 AP_InertialNav: reanme AP_InertialNav and ThirdOrderCompFilter classes to resolve desktop build compiler errors 2012-11-07 22:24:00 +09:00
rmackay9 ad431d2f25 ArduCopter: fixed HIL build caused by optical flow semaphore changes 2012-11-07 21:13:34 +09:00
rmackay9 cec96a76d7 ArduCopter: comment out InertialNav related Alt Hold and Loiter PID changes from APM_Config.h 2012-11-07 19:21:36 +09:00
rmackay9 1f801714e8 ArduCopter: incorporate new version of inertial navigation 
Moved several navigation functions from ArduCopter.pde to navigation.pde
 2012-11-07 19:21:31 +09:00
rmackay9 d9b4407e64 AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9 a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Andrew Tridgell e8ab62f6e5 ACM: switch to GPS velocity numbers in GLOBAL_POSITION_INT 
these numbers are much more useful than the redundent rotated ground
speed. They tell us exactly what the GPS is giving to AHRS
 2012-11-05 15:23:41 +11:00
Jason Short 8a8ed7a711 ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short 36040461df ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short e138b0a1d7 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
Jason Short 1713279ace ACM: Formatting 2012-10-27 14:13:46 -07:00
Jason Short 5149a8c723 ACM: Added notes, credit to decel code. added speed_min to calc. 2012-10-27 14:13:24 -07:00
Jason Short 73bc90f9b8 ACM: config.h cleanup 
Added LOG_ITERM default to enabled
 2012-10-27 09:59:57 -07:00
rmackay9 cebcc226ee ArduCopter: change TOY_M throttle mode to THROTTLE_HOLD 2012-10-26 10:56:06 +09:00
rmackay9 4877348c49 ArduCopter: remove some unhelpful constraints on nav_lat and nav_lon. 
Increase other constraints from 3200 to 32000.  These constraints are there to ensure int32_t do not cause an overflow when added to an int16_t.
 2012-10-24 22:04:35 +09:00
rmackay9 5e8043fd9c ArduCopter: changed ACRO_ROLL_STABILIZE and ACRO_PITCH_STABILIZE to parameters 
Changes on behalf of Leonard Hall
 2012-10-23 21:30:50 +09:00
Andrew Tridgell 406a5dc328 ACM: save another 20 bytes 2012-10-22 18:59:51 +11:00
Andrew Tridgell 9592be5af7 ACM: saved some more memory for strings 2012-10-22 18:57:08 +11:00
rmackay9 78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
Jason Short 6a40fcd56a ACM : fix compiler warning on non returning function 2012-10-21 14:37:42 -07:00
Jason Short 8842a7dc1b ACM : Cast to int32_T 
Don't think it really needs it, but I feel better with the cast.
 2012-10-21 14:36:05 -07:00
Jason Short a0752dc7dc ACM Acceleration management 
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
 2012-10-21 14:32:39 -07:00
rmackay9 a37a9b5b67 ArduCopter: updated firmware version to 2.8 2012-10-20 09:50:53 +09:00
rmackay9 4395fad6e9 ArduCopter: incremented eeprom format version to force users to accept the new defaults. 
Particularly important is the roll-pitch I term move from the stabilize to rate controllers.
 2012-10-19 16:14:51 +09:00
Pat Hickey d4bb8a10d7 Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Robert Lefebvre bfade7d0ed Fixed that last commit 
#define Stupid_Mistake
 2012-10-18 16:50:42 -04:00
Robert Lefebvre 592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9 1c08e48b4b ArduCopter: updated firmware version to 2.7.4-Zeta 2012-10-18 23:30:28 +09:00
rmackay9 583f2e49a3 ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9 a2a3eed063 ArduCopter: bug fix for telemetry not working on APM1. 
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
 2012-10-18 19:15:21 +09:00
rmackay9 d2912e4e01 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 401fb4101c ArduCopter: removed deprecated mag offset routine. 
Also removed commented-out block of code from navigation.pde.
 2012-10-17 19:47:21 +09:00
rmackay9 9e3c2dd105 ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 8519fe55d3 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 b944d9df26 ArduCopter: bug fix in earthframe->body frame translation. 
Provided by Leonard Hall.

Also removed large unnecessary comments.
 2012-10-17 19:15:25 +09:00
rmackay9 7d7de976c3 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
rmackay9 956b347d68 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 5fbe53a84d ArduCopter: bug fix for get_yaw_rate_stabilized_ef 
Provided by Leonard Hall
 2012-10-17 10:18:24 +09:00
Andrew Tridgell f828956cb8 battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
Robert Lefebvre 063cb41a11 Adding some comments to parameters. 2012-10-15 09:37:02 -04:00
rmackay9 4016f3ba85 ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
LeonardTHall d7b7e1cefa New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
rmackay9 ee5dab9647 ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9 997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9 240b0b43fd ArduCopter: small comment fixes related to battery monitoring 2012-10-13 20:52:14 +09:00
rmackay9 4a41a3d210 ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre dae81d2068 Added #define for Tilt_Compensation. 
Also added some detail to WP_Speed_Max parameter.
 2012-10-12 14:51:31 -04:00
Robert Lefebvre 4e649a381c Added comment detail for Tilt_Comp Parameter. 
Reduced parameter default value for TradHeli.
 2012-10-11 13:17:39 -04:00
rmackay9 1e79d265a1 ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9 cf3e49eea2 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
rmackay9 03933df5b7 ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015 
Updated after discussing with Marco
 2012-10-11 17:25:01 +09:00
rmackay9 35fa50234f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00
rmackay9 2848bb8ee6 ArduCopter: freeze I terms if motor limits breached 2012-10-11 17:20:00 +09:00
Andrew Tridgell 601fe89baa ACM-HIL: fixed optflow declaration 2012-10-11 11:51:25 +11:00
Pat Hickey bbc7f050e5 ArduCopter GCS_MAVLink: COMMAND_LONG for arm/disarm motors 
Date: Wed, 26 Sep 2012 15:56:43 -0700
Subject: ArduCopter arm/disarm command consensus
From: Pat Hickey
To: Michael Oborne
Cc: "Craig J. Elder", arducopter
<arducopter@googlegroups.com>,
    mavelous <mavelous@googlegroups.com>

    Michael,

    Per our discussion today,

    In a MAVLINK_MSG_ID_COMMAND_LONG
    A MAV_CMD of type MAV_CMD_COMPONENT_ARM_DISARM
    with component id MAV_COMP_ID_SYSTEM_CONTROL = 250,
    uses param index 1 to specify an arm/disarm motors event: 1 to arm,
    0 to disarm

    Thanks for working this out with me. Sorry to get it so completely
    wrong the first time around!

    Best
    Pat
 2012-10-10 18:59:55 +08:00
Pat Hickey da374f9043 ArduCopter: Provide AP_Semaphore instance for SPI3 bus on APM2. 2012-10-09 11:39:39 -07:00
rmackay9 b876733c0d ArduCopter: added message to console when entering ESC Calibration on startup 2012-10-09 12:31:05 +09:00
rmackay9 c0ad98be31 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9 fa0963d592 ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV 2012-10-08 12:31:51 +09:00
rmackay9 3c9ba94f42 ArduCopter: bug fix to ROI when no camera mount is specific 2012-10-08 12:31:10 +09:00
rmackay9 7cf60e61b4 ArduCopter: bug fix in earth-frame to body-frame conversion for roll 2012-10-07 19:14:40 +09:00
rmackay9 05fd04134a ArduCopter: fix heli build 2012-10-06 13:46:19 +09:00
rmackay9 61d0c8e35c ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9 af1d6a9b82 ArduCopter: reduce Stabilize Yaw P term to 4.5 2012-10-03 14:19:49 +09:00
rmackay9 e375a27058 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9 ea4f256f8e ArduCopter: BATT_PIN parameter added to allow you to select which pin is used for voltage and current measurements 
To save a parameter, the current sensor pin is assumed to always be 1 higher than the voltage pin.
 2012-10-02 22:16:19 +09:00
Michael Oborne a38fef65c7 AP,AC Add ability to override an altitude in any auto mode, on the current active target 2012-09-30 07:29:33 +08:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 bae53807b2 ArduCopter: tiny formatting change in defines.h 2012-09-27 17:40:54 +09:00
rmackay9 280488fa5e ArduCopter: bug fix to display ITERM enabled/disabled properly from cli 
Also changed header for this message type to ITERM instead of just IT to make it more clear what it is
 2012-09-27 17:40:30 +09:00
rmackay9 ed881117e0 ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9 fff5d51694 ArduCopter: reduced Loiter Rate I to 0.04 (was 0.08) 2012-09-25 19:08:31 +09:00
rmackay9 a71aa21514 ArduCopter: increase default Loiter Rate P to 5.0 2012-09-25 12:19:44 +09:00
rmackay9 b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9 889d1bb36c ArduCopter: alt hold bug fix - removed reset next_WP in init_home 2012-09-23 01:00:06 +09:00
rmackay9 b3ff368589 ArduCopter: position lead filters modified to use lag which varies by gps 2012-09-20 15:49:09 +09:00