bugobliterator
9919af69bc
AP_HAL_ChibiOS: add config to enable sccripting on CANMod
2024-02-07 18:31:02 +11:00
Henry Wurzburg
2729b11b2f
hwdef: add ASP5033 airspeed in minimal builds
2024-02-06 11:27:18 +11:00
Peter Barker
4c272d21ee
AP_HAL_ChibiOS: make compass.mag_cal_fixed_yaw return boolean
...
this method could be used from a transmitter without GCS enabled, for example
2024-02-06 11:11:27 +11:00
Peter Barker
9961e8c49d
hwdef: remove bad hwdef lines
...
these have no effect
2024-02-06 10:58:44 +11:00
Peter Barker
0d26118b12
hwdef: tidy AP_Radio includes
2024-02-05 09:26:14 +11:00
Andrew Tridgell
85439360d7
HAL_ChibiOS: fixed I2C4 on STM32G4
2024-02-05 07:36:14 +11:00
Andrew Tridgell
1e4f597e02
HAL_ChibiOS: fixed support for STM32H7A3
...
need to tell ChibiOS this is a newer H7
2024-02-03 08:36:18 +11:00
David O'Connor
078697c825
hwdef: add AnyLeaf H7 board
2024-02-01 11:43:57 +11:00
Leonardo Garcia
5749bd5074
AP_HAL_ChibiOS: mRo KitCAN revC board fix
...
Add RM3100 reversal mask to deal with M10025C board changes.
2024-02-01 11:43:35 +11:00
Andrew Tridgell
33f6a1d87e
hwdef: added MatekH7A3 support
2024-02-01 11:43:24 +11:00
Andrew Tridgell
054fb94e9a
HAL_ChibiOS: added support for STM32H7A3
...
interesting MCU as it is the first H7 we support that doesn't have a
128k flash sector size
2024-02-01 11:43:24 +11:00
Andrew Tridgell
07d0418cf9
HAL_ChibiOS: fixed flash support on H7 with 8k page size
...
the STM32H7A3xx has 8k pages
2024-02-01 11:43:24 +11:00
yjuav
8e71cf83cd
hwdef: add YJUAV_A6Ultra board support
2024-02-01 11:29:11 +11:00
Andrew Tridgell
30497244d9
HAL_ChibiOS: whitespace fixes
2024-01-30 12:32:23 +11:00
Andrew Tridgell
0a6057f2b3
HAL_ChibiOS: adjust clocks for H723 and H730
...
FDCAN clock must be 80MHz, and also align no-crystal clocks with
clocks for boards with crystals
2024-01-30 12:32:23 +11:00
Andrew Tridgell
aea2863141
hwdef: Added BotBloxSwitch
2024-01-30 12:32:23 +11:00
Andrew Tridgell
967af533b9
HAL_ChibiOS: fixed flash page count on H723
...
single bank H7 has 8 pages
2024-01-30 12:32:23 +11:00
Andrew Tridgell
4eaf5ef247
HAL_ChibiOS: support STM32H723 boards
2024-01-30 12:32:23 +11:00
Andrew Tridgell
e772012e01
HAL_ChibiOS: raise SDMMC clock limit on H7
...
this allows for faster log download on ethernet
2024-01-29 06:51:11 +11:00
Andrew Tridgell
a2707b48c5
HAL_ChibiOS: enable clock management on G4
...
this allows for a different clock tree in the main fw from the
bootloader
2024-01-25 11:44:02 +11:00
Andrew Tridgell
2d031a4d20
HAL_ChibiOS: switched G4 FDCAN clock to 80MHz
...
this requires main CPU clock at 160 MHz instead of 168 MHz
2024-01-25 11:44:02 +11:00
MallikarjunSE
873e2eac7d
AP_HAL_ChibiOS: update truenav hwdef
2024-01-24 07:58:09 +11:00
Andrew Tridgell
e714f0a7a3
AP_HAL_ChibiOS: fixed name of pitch limit parameters
2024-01-23 15:00:30 +11:00
Andrew Tridgell
a6bceccd82
AP_HAL_ChibiOS: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
862b0ed8d6
AP_HAL_ChibiOS: convert param files for pitch limits
2024-01-23 15:00:30 +11:00
Andrew Tridgell
e5199a71d6
AP_HAL_ChibiOS: convert ALT_HOLD_RTL to RTL_ALTITUDE
2024-01-23 15:00:30 +11:00
Andrew Tridgell
f935cbaead
AP_HAL_ChibiOS: convert ARSPD_FBW_MIN/MAX to AIRSPEED_MIN and AIRSPEED_MAX
2024-01-23 15:00:30 +11:00
Andrew Tridgell
98d40d0e58
AP_HAL_ChibiOS: converted TRIM_ARSPD_CM to AIRSPEED_CRUISE
2024-01-23 15:00:30 +11:00
Peter Barker
331110639e
AP_HAL_ChibiOS: rename COMPASS_TYPEMASK to COMPASS_DISBLMSK
...
this is a very confusingly named parameter. I've seen several instances of people treating this as an enable mask rather than a disable mask
2024-01-23 11:54:49 +11:00
Andrew Tridgell
140518da3c
hwdef: added support for Holybro6X-45686
2024-01-23 11:49:14 +11:00
bugobliterator
9de1b6164b
AP_HAL_ChibiOS: add more pins to STM32H757 ADC channel map
2024-01-22 20:35:16 +11:00
MallikarjunSE
f71fc58767
AP_HAL_ChibiOS: Add hwdef for TrueNavPro-G4
2024-01-21 13:10:10 +11:00
MallikarjunSE
6231a5edfd
AP_HAL_ChibiOS: add TrueNavIC hwdef
2024-01-21 13:10:10 +11:00
Andrew Tridgell
f7c7ee00e9
HAL_ChibiOS: added a delete_next thread field for cleanup
...
allows for cleanup of web server threads in bootloader
2024-01-21 12:30:08 +11:00
Andrew Tridgell
5e7b211b79
HAL_ChibiOS: moved M4 disable into H757 script
...
this fixes assert checking in the bootloader and for boards other than
CubeRedPrimary
2024-01-21 12:30:08 +11:00
Andrew Tridgell
b49a7da32a
hwdef: disable use of external flash in PPPGW
...
we cannot upload new firmware on CAN or network with external flash
2024-01-21 12:30:08 +11:00
Andrew Tridgell
855a5d28c0
hwdef: use a common PPPGW include
...
and fixed missing RTC bindings in web server
2024-01-21 12:30:08 +11:00
Andrew Tridgell
3a84f35593
HAL_ChibiOS: support building with no GPIOs
2024-01-21 12:30:08 +11:00
Andrew Tridgell
f225d797d2
hwdef: use common include for network bootloader
2024-01-21 12:30:08 +11:00
Andrew Tridgell
4e49481d3a
hwdef: enable USB for bootloader on Pixhawk6X-PPPGW
2024-01-21 12:30:08 +11:00
Andrew Tridgell
91cc0d7dba
HAL_ChibiOS: ensure periph uses same RAM0 address as bootloader
...
this fixes passing of addresses for boards that use an ALT_RAM_MAP
2024-01-21 12:30:08 +11:00
Andrew Tridgell
82dea9c037
HAL_ChibiOS: ensure our reserved ram is not in available ram regions
...
this prevents a fault when the ram0 region is filled in by the periph
code on boards that do dynamic memory allocation
2024-01-21 12:30:08 +11:00
Andrew Tridgell
a155f592a4
hwdef: added CubePilot PPPGW builds
2024-01-21 12:30:08 +11:00
Andrew Tridgell
2fee9e69db
HAL_ChibiOS: support ROMFS_DIRECTORY in hwdef.dat
2024-01-21 12:30:08 +11:00
Andrew Tridgell
46f65aec4e
AP_Periph: moved web UI script to Tools/AP_Periph
...
for use in multiple boards
2024-01-21 12:30:08 +11:00
Andrew Tridgell
69f23edd4a
hwdef: added bootloader web server for Pixhawk6X-PPPGW
2024-01-21 12:30:08 +11:00
Peter Barker
8e2a634c72
hwdef: don't enable filesystem-romfs just because we have a defaults file
2024-01-18 21:44:15 +11:00
Peter Barker
e958e7b720
hwdef: enable ROMFS if we have a defaults filepath to embed
2024-01-18 21:44:15 +11:00
Peter Barker
3aab3bac52
Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory
...
Tools: move defaults from tools to hwdef directory
2024-01-17 18:28:48 +11:00
Peter Barker
c4a342f0af
AP_HAL_ChibiOS: use @ROMFS/defaults.parm rather than apj_tool for defaul parms
2024-01-17 18:28:48 +11:00
Peter Barker
29f1953ad7
AP_HAL_ChibiOS: remove bad default from kha_eth hwdef
...
off is the default, but you have to use 0 not FALSE or it's a redefinition error
2024-01-17 18:25:55 +11:00
Peter Barker
2e23fa7612
hwdef: remove ghost telemetry from peripherals
2024-01-16 09:46:57 +11:00
Peter Barker
f7365556d0
AP_HAL_ChibiOS: tidy disabling of GHST on iomcu
2024-01-16 09:46:57 +11:00
Thomas Watson
5f5673b58f
AP_HAL_ChibiOS: match thread stack pointer types to ChibiOS
...
`__main_thread_stack_base__` and `__main_thread_stack_end__` are
variables whose address is defined to be the corresponding part of the
stack. These are declared as `extern stkalign_t` in ChibiOS code, and
being declared as `extern uint32_t` in ArduPilot code creates a warning
at link time when using LTO. Correct the declaration to eliminate this
warning.
Also update `__main_stack_base__` and `__main_stack_end__` which don't
currently trigger this warning but serve similar purposes and so might
in the future.
The hardware expects an alignment of `stkalign_t` (which is 8 bytes) and
the linker script defines the variable values with this alignment as
well, so this is safe.
No code size or functional change.
2024-01-16 09:24:34 +11:00
Peter Barker
d0e7039b68
hwdef: remove un-needed AP_PARAM_MAX_EMBEDDED_PARAM default
...
these boards have <= 1024, and we have code in place which defaults this value tto 1024
2024-01-15 20:25:59 +11:00
Peter Barker
7cf66d917c
hwdef: correct compilation of revo-mini-sd
...
this isn't built on the firmware server, so we won't notice when it dies
In this case the SMBUS batter define was being set differently
Also remove some redundant defines which come from includes anyway
2024-01-15 20:24:37 +11:00
Peter Barker
d4f59cbe5f
hwdef: remove HAL_NO_LOGGING from Here4FC-bl.dat
...
this was removed from master a long time ago
2024-01-15 09:40:35 +11:00
Peter Barker
ad90e37f21
hwdef: remove bad AP_PERIPH_HAVE_LED lines from bootloaders
...
this define is only used within the AP_Periph directory
2024-01-15 09:40:35 +11:00
Andrew Tridgell
60c69d052b
hwdef: added scripting to CubePilot-PPPGW
2024-01-12 19:06:49 -08:00
Andrew Tridgell
faea203af6
hwdef: added web UI to PPPGW example
2024-01-12 19:06:49 -08:00
Andrew Tridgell
2c946b92e9
hwdef: added Pixhawk6X-PPPGW
2024-01-12 14:23:34 -08:00
Andrew Tridgell
280d7c6d15
hwdef: added CubePilot-PPPGW
2024-01-12 14:23:34 -08:00
Davide_Lentini
5fdcd876ee
AP_HAL_ChibiOS: Update defaults.parm of luminousbee5 board
2024-01-12 20:45:11 +09:00
Andy Piper
3caf336b0f
AP_HAL_ChibiOS: switch BetaFPV-F405, BeastF7 and BeastF7v2 to minimize_fpv
2024-01-10 18:32:53 +11:00
Maxim Buzdalov
809e15acf4
hwdef: Add pinout for Flywoo GOKU F745 AIO v1.2
2024-01-09 10:57:29 +11:00
bugobliterator
57ccac308d
AP_HAL_ChibiOS: Add readme file to Here4 FC
2024-01-08 07:05:34 +11:00
bugobliterator
ec15951b06
AP_HAL_ChibiOS: add hwdef for Here4FC
2024-01-08 07:05:34 +11:00
Andrew Tridgell
6ea2c28a4d
HAL_ChibiOS: fixed DMA on SPI on H743
...
this fixes DMA failures affecting IMUs on H743. The reason for the
failure is not yet clear, but this reverts back to our old stragegy of
always using the bouncebuffer on H7 as a quick workaround
2024-01-07 19:10:25 +11:00
Andrew Tridgell
c54aa0241a
HAL_ChibiOS: added mem_is_dma_safe() function
...
used for bouncebuffer code and in FATFS code
2024-01-05 06:52:11 -08:00
Peter Barker
c557e67aff
chibios_hwdef.py: populate intdefines as part of parsing, not output
2024-01-04 20:29:14 +11:00
jamming
6fe7a1408e
hwdef: Add support for BMI088 on Pixhawk6c
2024-01-04 07:17:24 +11:00
Peter Barker
ed1ae3b5f1
chibios_hwdef.py: add quiet option to remove parsing debug output
2024-01-03 18:04:37 +11:00
Andrew Tridgell
cc8c671cb7
HAL_ChibiOS: don't link evtimer in chibios_board.mk
2024-01-03 12:14:47 +11:00
Andrew Tridgell
418897c443
HAL_ChibiOS: removed old lwip options
2024-01-03 12:14:47 +11:00
Andrew Tridgell
9456b585fa
HAL_ChibiOS: don't link lwip bindings from ChibiOS
2024-01-03 12:14:47 +11:00
Andrew Tridgell
5748adbf44
HAL_ChibiOS: allow for networking without ethernet
2024-01-03 12:14:47 +11:00
Peter Barker
467daeb4a6
hwdef: tidy checking of is-bootloader-build
2024-01-02 13:00:15 +11:00
alexklimaj
c53d3ae09b
hwdef: ARK_CANNODE add rangefinder
2024-01-02 11:58:35 +11:00
alexklimaj
e9f51a96cb
hwdef: ARKV6X add USART6 to serial list
2024-01-01 13:17:06 +11:00
Andrew Tridgell
1e626a70cb
hwdef: added MatekL431-Serial
2023-12-27 05:13:14 -07:00
Andrew Tridgell
46171a7c79
hwdef: give a more useful error message on no bootloader
2023-12-27 21:45:13 +11:00
Andrew Tridgell
d2d2067f1c
HAL_ChibiOS: fixed micros and millis on boards without 1MHz clock
2023-12-24 10:10:14 +11:00
Andrew Tridgell
4a59097b5e
HAL_ChibiOS: use C implemention of div1000
2023-12-21 09:09:11 +11:00
bugobliterator
cf481a8952
AP_HAL_ChibiOS: allow option to enable scripting on CubeRedSecondary
2023-12-21 07:30:25 +11:00
Andrew Tridgell
65cae116a2
hwdef: fixed build of CarbonixL496
2023-12-20 20:07:35 +11:00
Andrew Tridgell
6dbc3b6a70
HAL_ChibiOS: speed up millis(), micros64() etc
...
these use faster primitives and an assembly division by 1000 to get
between 2x and 3x speedup on these critical calls
2023-12-19 11:47:24 +11:00
Thomas Watson
2aa4ee8ba7
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
2023-12-19 06:53:15 +11:00
Thomas Watson
dc4438d0e3
AP_HAL_ChibiOS: eliminate legacy UART ordering/references
...
SERIAL_ORDER has been around for a few years now and UART_ORDER is
rejected by the hwdef script, so support for UART_ORDER and associated
processing in the hwdef script is removed, along with the order
conversion script.
2023-12-19 06:53:15 +11:00
Andy Piper
d2a48148dd
AP_HAL_ChibiOS: allow bdshot iomcu on non-bdshot fmu
2023-12-18 19:02:52 +11:00
Andy Piper
8c03c9e4bf
AP_HAL_ChibiOS: cache values of io_dshot() and io_enabled()
...
enabled shared_up_dma to be fully compiled out
address some minor review comments
2023-12-18 19:02:52 +11:00
Andy Piper
a5b6c3b5ef
AP_HAL_ChibiOS: utility to print out bdshot encoded data
2023-12-18 19:02:52 +11:00
Andy Piper
9f30d01561
AP_HAL_ChibiOS: bdshot for f103 iofirmware
...
add support to tell if shared DMA channel is actually shared
avoid starting and stopping the timer peripheral with bdshot
ensure that rcout DMA allocation and deallocation happens entirely within the lock
increase rcout thread working area for bdshot
fix mode mask that is sent to the iomcu
ensure iomcu rcout thread gets timeouts for callbacks
control bdshot input and output line levels on f103
use input capture channel pairs to read rising and falling edges of telemetry on f103
reset channel pairs together on iomcu
generalize the bdshot input path to support suitable buffer sizes for iomcu
generalize DMAR reading of CCR registers to read two at a time on iomcu
enable bi-directional dshot channels on PWM1-4 on iomcu
add methods to directly access erpm values from rcout
update erpm mask and esc telemetry correctly for firmware supporting dshot
add support for propagating bdmask to iomcu
dshot commands to all channels need to be aware of iomcu
ensure esc type is propagated to iomcu
cope with iomcu channel numbering when using EDT
ensure pwm driver is reset properly for dshot commands on iomcu
correctly reset pwm for dshot commands
correctly mask off bdshot bits going to iomcu
don't reset GPIO modes on disabled lines
don't reset pwm_started when sharing DMA channels
set thread name on iomcu rcout and reduce stack size on iomcu
ensure that bdshot pulses with no response are handled correctly
correctly setup DMA for input capture on f103
deal with out of order captured bytes when decoding bdshot telemetry
ensure DMA sharing on f103 does not pull lines low
only disable the timer peripheral when switching DMA channels on iomcu
add support for waiting for _UP to finish before proceeding with dshot
re-order iomcu dshot channels to let TIM4_UP go first
ensure that a cascading event will always come when expected on rcout
allow timeouts when using cascading dshot
always rotate telemetry channel after trying to capture input
cater for both in order and out-of-order bdshot telemetry packets
cope with reversed packets when decoding bdshot telemetry
ensure UP DMA channel is fully free on iomcu before starting next dshot cycle
refactor rcout for iofirmware into separate file
2023-12-18 19:02:52 +11:00
tomas.vrsansky
e6feebb2fb
AP_HAL_ChibiOS: add hwdef files for Airvolute DCS2 onboard FMU
...
added ethernet config to hwdef
updated readme.md
hwdef: MAC parameters redefined according to ChibiOS
hwdef: add default params for Airvolute DCS2 on board FMU
update according to new changes in ChibiOS MAC driver
added defines to support ethernet communication
bootloaders: Airvolute-DCS2
2023-12-12 11:09:09 +11:00
Andrew Tridgell
a4fb05de95
HAL_ChibiOS: increase LWIP windows
...
now getting 6.8MByte/s with NET_TESTS=4
2023-12-11 18:00:38 +11:00
Andrew Tridgell
28885dca4c
HAL_ChibiOS: adjust buffer sizes
...
this fixes issues with TCP accepts being lost in web server
2023-12-11 18:00:38 +11:00
Andrew Tridgell
f603f045b5
HAL_ChibiOS: make lwip debugging easier
...
use ap_networking_printf wrapper
2023-12-11 18:00:38 +11:00
Andrew Tridgell
436c60c7de
HAL_ChibiOS: defaults to 50 socket limit
...
makes for more useful web server
2023-12-11 18:00:38 +11:00
bugobliterator
00a65632eb
AP_HAL_ChibiOS: add support for swapping ICM42688 with ICM45686
2023-12-06 13:34:52 +11:00
bugobliterator
e34e9c61aa
AP_HAL_ChibiOS: disable core m4 use to silence the chibios asserts
...
checking allocation of peripherals
2023-12-06 13:31:26 +11:00
Andy Piper
cca8f8219a
hwdef: new variant of KakuteH7 using ICM42688
2023-12-05 11:41:08 +11:00
Andy Piper
0cc5cf7d2d
AP_HAL_ChibiOS: allow betaflight converter to run on output from "dump hardware"
2023-12-05 11:38:53 +11:00
Martin Luessi
6e417f1d0c
RADIX2HD: Set HAL_I2C_INTERNAL_MASK
2023-12-05 11:37:57 +11:00
jfbblue0922
c16e1a28df
AP_HAL_ChibiOS/hwdef: changed defaults parm in JFB110 board definition
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-11-28 15:58:53 +09:00
Andrew Tridgell
f471732aad
HAL_ChibiOS: enable SO_REUSEADDR
2023-11-28 12:18:55 +11:00
Andrew Tridgell
0659ab8ef4
HAL_ChibiOS: increase max TCP resources
2023-11-28 12:18:55 +11:00
Henry Wurzburg
d9d5e91110
hwdef: update SDH7V1 readme
2023-11-28 11:47:32 +11:00
daniel.li
e6b7daa323
AP_HAL_ChibiOS: Add Aocoda-RC-H743Dual target
2023-11-28 10:29:23 +11:00
Tom Pittenger
1f7b4d0938
AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for minimize
2023-11-26 11:57:14 +11:00
Tom Pittenger
cd6a656acf
AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for periph
2023-11-26 11:57:14 +11:00
Peter Barker
27f836b66e
hwdef: correct ARK_CANNODE compilation
...
this was turning SPI on when there aren't any devices...
2023-11-25 13:47:13 -08:00
alexklimaj
ddba794420
hwdef: ark_rtk_gps fix safety led
2023-11-25 13:45:56 -08:00
Peter Barker
e9fc99b1bf
AP_HAL_ChibiOS: base HAL_USE_SPI on devices not buses
...
fixes compilation problem with gcc 10.3
../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp: In static member function 'static void ChibiOS::SPIDeviceManager::__static_initialization_and_destruction_0(int, int)':
../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp:76:18: error: statement has no effect [-Werror=unused-value]
76 | ChibiOS::SPIDesc SPIDeviceManager::device_table[] = { HAL_SPI_DEVICE_LIST };
| ^~~~~~~~~~~~~~~~
compilation terminated due to -Wfatal-errors.
cc1plus: some warnings being treated as errors
2023-11-22 18:14:00 +11:00
Peter Barker
15e0f689c2
AP_HAL_ChibiOS: correct AP_Filter defines
...
- checking the build type is very rarely used and definitely not required here
- fix boilerplate to conform to normal pattern of including the config header and #if'ing based on the _ENABLED directly after that
2023-11-21 21:13:42 +11:00
Andy Piper
229916a48c
AP_HAL_ChibiOS: enable serial LEDs on ARK_CANNODE
2023-11-20 19:23:06 +11:00
Andrew Tridgell
2ba4bf1478
HAL_ChibiOS: allow for --disable-networking
2023-11-17 10:54:24 -08:00
Andrew Tridgell
6bf3debe73
HAL_ChibiOS: default disable ICE in periph
2023-11-17 13:09:02 +11:00
Tom Pittenger
ac16f10ecd
AP_HAL_ChibiOS: hwdef kha_eth to show SerialManager params
2023-11-16 10:58:50 -08:00
Jonathan Loong
16c55a3bc1
AP_HAL_ChibiOS: Add in CarbonixF405 QMC5883P compass enable
2023-11-15 10:53:38 +11:00
Jonathan Loong
8d64d5215e
AP_Periph: CarbonixL496 crystal hwdef changes
2023-11-15 10:53:38 +11:00
Henry Wurzburg
4681e5fba6
hwdef:correct JFB110 defaults
2023-11-14 10:55:33 +11:00
Andrew Tridgell
2f9bfb648f
HAL_ChibiOS: default RTS pins to PULLDOWN
...
this avoids issues with SiK and RFD900x radios getting stuck in
bootloader mode due to a high RTS pin on power on.
We did this for Pixhawk6C in this PR:
https://github.com/ArduPilot/ardupilot/pull/24169
this now applies it to all boards
2023-11-12 07:26:50 +11:00
Cedric0489
95dbb7a3f5
AP_HAL_ChibiOS: added PixPilot-C3
2023-11-10 17:14:18 +11:00
Henry Wurzburg
ba76d4e2f9
hwdef:save flash on FlywooF405S-AIO
2023-11-09 12:49:13 +11:00
Andrew Tridgell
7b6ad15f90
hwdef: make f103-QiotekPeriph a single compass
...
dual compass periph is not supported
2023-11-08 18:34:41 +11:00
Peter Barker
d2a3fed4a1
hwdef: AP_BATTERY_ESC_ENABLED needs HAL_WITH_ESC_TELEM
2023-11-08 18:05:55 +11:00
yjuav
f7dd6dec96
hwdef: add YJUAV_A6SE_H743 board support
2023-11-07 10:31:20 +11:00
jfbblue0922
7d4d2f98bf
AP_HAL_ChibiOS: corrected analog input pin number
2023-11-02 19:08:09 +11:00
bugobliterator
5bd5aa87a7
AP_HAL_ChibiOS: add CubeNode pinout diagram
2023-11-01 14:18:02 +00:00
Andy Piper
2bef8f2cad
AP_HAL_ChibiOS: add support for SpeedyBeeF405v4
2023-11-01 19:25:19 +11:00
Andrew Tridgell
cd3eab3c5d
hwdef: support Holybro Pixhawk6X_Rev6
2023-10-31 10:42:25 +11:00
Andrew Tridgell
6173726846
HAL_ChibiOS: fail on badly formed SPIDEV line
2023-10-31 10:42:25 +11:00
Peter Barker
9dbd6f335a
hwdef: minimize_features on mini-pix, not minimize_fpv_osd
2023-10-31 09:13:01 +11:00
Henry Wurzburg
e474305c6d
hwdef:free flash for space critical bds
2023-10-28 13:32:19 +11:00
Peter Barker
90607ffa5f
hwdef: remove payload place from minimized boards
2023-10-27 14:15:53 +11:00
Peter Barker
ba72b7edfd
hwdef: fix speedybeef4v3 build
...
double-definition
2023-10-26 18:15:30 +11:00
Peter Barker
8e5708b6f2
speedybeef4: remove redefinition of AP_BATTERY_SYNTHETIC_CURRENT_ENABLED
2023-10-26 18:15:30 +11:00
Peter Barker
f5045384cf
hwdef: correct ReaperF745 build
2023-10-26 18:15:30 +11:00
Peter Barker
b757319245
hwdef: fix KakuteF4Mini build
...
redefinition
2023-10-26 18:15:30 +11:00
Peter Barker
38db3d8cbc
hwdef: fix F35Lightning build
...
.... and remove redundantdefine
2023-10-26 18:15:30 +11:00
Andy Piper
fee43af729
AP_HAL_ChibiOS: enable highres sampling on CubeOrangePlus
2023-10-25 19:23:11 +11:00
Peter Barker
b86c5b7eea
hwdef: remove unused HAL_NO_LOGGING define from hwdefs
2023-10-25 19:17:18 +11:00
Peter Barker
28e89505fe
hwdef: remove redundant HAL_GCS_ENABLED lines
2023-10-25 19:17:18 +11:00
Peter Barker
6152059843
hwdef: rearrange FlyingMoonH743 IMU order
2023-10-25 09:47:43 +11:00
Peter Barker
782b51b89b
hwdef: rearrange FlyingMoonF427 IMU order
2023-10-25 09:47:43 +11:00
Tom Pittenger
4dc9d1ebc7
AP_HAL_ChibiOS: enable scripting on CubeOrange-periph-heavy
2023-10-23 22:44:35 -07:00
Henry Wurzburg
5c546dedcb
hwdef:include minimal in minimize_common
2023-10-24 12:20:41 +11:00
Andy Piper
51793ef5ca
hwdef: bugfixes for BETAFPV-F405
2023-10-24 11:44:54 +11:00
Martin Luessi
0970cb29c7
AP_HAL_ChibiOS: RADIX2HD Probe external I2C compasses
2023-10-24 10:44:57 +11:00
Martin Luessi
04564882fa
AP_HAL_ChibiOS: Add UART7 to RADIX2HD target
2023-10-24 10:05:57 +11:00
Michael du Breuil
0739f0839f
AP_HAL_ChibiOS: Add sw-spar-f407 periph target
2023-10-24 09:48:13 +11:00