Peter Barker
24441dbc00
autotest: augment arming test to attempt as CMD_INT
2023-07-12 18:51:07 +10:00
Peter Barker
4fc5b5bdb6
autotest: augment yaw calibration test to attempt as CMD_INT
2023-07-12 18:51:07 +10:00
Peter Barker
522456a535
Tools: act on safety switch being enabled in SITL by zeroing outputs
2023-07-12 17:53:12 +10:00
Peter Barker
d182baa6b8
auototest: fail test if pymavlink too old
2023-07-07 12:21:27 +10:00
Peter Barker
085a10a3a1
autotest: remove binary before attempting to build it
...
this fixes behaviour when --no-configure and --no-build are passed in, causing subsequent test steps to fail rather than proceed with an old binary
2023-07-07 12:19:32 +10:00
Henry Wurzburg
8201b6b214
Tools:add reboot for failing CI test
2023-07-04 10:24:30 +10:00
Peter Barker
32c2dc73b5
autotest: tidy checking of received MISSION_ACK messages
2023-07-01 14:46:31 +10:00
Peter Barker
48224892e1
autotest: add a get_cached_message method
...
saves looking up where to get these from all the time
2023-07-01 14:46:31 +10:00
Peter Barker
ce9117a296
autotest: add a assert_cached_message_field_values method
...
also allow polling for messages when asserting receipt of a message
2023-07-01 14:46:31 +10:00
Peter Barker
a5ed5f4f82
autotest: improve diagnostics for bad field values
...
print out enumeration name and enumeration value name when
ng comparisons
2023-07-01 14:46:31 +10:00
Iampete1
5fa8b887a2
Tools: Param Parse: add reference name to vehicle parameter table
2023-06-30 09:46:47 +10:00
rishabsingh3003
5500cb97c7
autotest: add simulated nooploop tofsense rangefinder
2023-06-28 17:16:22 +10:00
Andrew Tridgell
669b58b017
Tools: fixed RefindGPS test
...
this test was relying on the EKF bug fixed in this PR. The copter was
actually fully landing and touching the ground in the LAND phase
whereas the original intention of this test was that it not touch the
ground in LAND. See the graph in
https://github.com/ArduPilot/ardupilot/pull/17104 where the test was
added
2023-06-26 18:09:31 +10:00
bnsgeyer
c8fc238e62
Tools: add throttle curve and governor autotest for tradheli
2023-06-16 23:18:23 +10:00
Randy Mackay
7ecb580519
Tools: autotest proximity sensor fix for sf45b
2023-06-14 17:49:30 +10:00
Peter Barker
f76eee12e0
autotest: test_build_options: add must-have-defines for CubeBlack
2023-06-14 17:01:26 +10:00
Peter Barker
d0f06beeaa
autotest: care not which CAN GPS is unhealthy when in maintenance mode
2023-06-07 14:21:43 +10:00
Andrew Tridgell
4e09fe04a3
Tools: added test for MAV_CMD_EXTERNAL_POSITION_ESTIMATE
2023-06-06 15:19:12 +10:00
Paul Riseborough
04499a716a
Tools/autotest: Add external lat lng position set to replay message list
2023-06-06 15:19:12 +10:00
Peter Barker
35ebc25172
autotest: restart both CAN nodes in CAN prearm test
...
the node id we put into maintenane mode varies
2023-06-04 15:24:59 +10:00
Peter Barker
a710a75b6b
autotest: add delays around CAN tests - there are races
...
this delay shouldn't exist at all. But without extending this we get a different node ID being allocated (125 vs the expected 124)
2023-06-04 15:24:59 +10:00
Peter Barker
d4c5908773
autotest: remove pause after starting ArduPilot binary
2023-06-04 15:24:59 +10:00
Peter Barker
de61384fa5
autotest: timesync roundtrip after setting parameter
...
may fix flapping test
2023-06-04 09:13:47 +10:00
Peter Barker
90b91aacc0
autotest: empty buffer after printing prefixed lines
...
these are just accumulating as-is
2023-06-02 23:33:50 +10:00
Peter Barker
28da57f940
autotest: correct duplicate-test-name problems
2023-06-02 22:58:40 +10:00
Peter Barker
2d7bb4b2f2
autotest: adjust prefix for supplementary binaries
2023-06-01 11:36:49 +10:00
Peter Barker
8c5c436652
autotest: prefix all stdout from SITL binary
2023-06-01 11:36:49 +10:00
Peter Barker
ddcf212c58
autotest: do timesync roundtrip to ensure fresh system time
...
validating stream rates by checking we have received SYSTEM_TIME is no good if we receive data out of a tcp queue somewhere.
2023-06-01 11:36:32 +10:00
Peter Barker
909068e1e5
autotest: reconnect mavlink when starting SITL
...
.... self.mav corresponds to the SITL we're starting here. If we have previously connected to it then reconnect, as we know the connection will be bad
2023-06-01 11:36:32 +10:00
Peter Barker
bfaf024fc3
auotest: wait for a heartbeat when creating connection
...
until we receive a heartbeat we won't "lock on" to a target, and that has implications for validating received packets
2023-06-01 11:36:32 +10:00
Peter Barker
8724e222bd
autotest: improve do_timesync_roundtrip diagnostics
2023-06-01 11:36:32 +10:00
Peter Barker
1181ce2bf8
autotest: poll ftp status at intervals
...
sometimes we're not done in 2 seconds
2023-06-01 11:36:16 +10:00
Andrew Tridgell
8442787770
Tools: added litres param unit
2023-05-30 21:04:34 +10:00
Peter Barker
7bdc31b539
autotest: add an epsilon for achieved servo output for speed scaling test
...
right on the threshold
2023-05-30 12:34:33 +10:00
Peter Barker
ea0ab227ce
autotest: remove unnecessary try/except from Sprayer test
2023-05-30 12:34:33 +10:00
Peter Barker
aff1247f30
Tools: add documentation for SIM_GPS_TYPE and SIM_GPS2_TYPE
2023-05-25 17:59:12 +10:00
Randy Mackay
c7f78471e1
Tools: add copter-winch default params file
...
This file speeds up developer configuration of a simulated winch
2023-05-25 09:46:23 +10:00
Peter Barker
d4dabeb6fc
autotest: add tests against bad vel/accels in copter guided
2023-05-25 09:42:28 +10:00
bugobliterator
dc8deec351
autotest: add support for testing mavlink in lua
2023-05-24 19:03:28 +10:00
Iampete1
4d72a86032
Tools: autotest: Web: remove tools (now here : https://github.com/ArduPilot/WebTools )
2023-05-23 11:03:04 +10:00
ES-Alexander
e7b369473b
Tools: logger_metadata: add emit_md
2023-05-19 18:44:02 +10:00
Peter Barker
fd2d976472
autotest: remove SIM_MAG1_DEVID from missing SITL param whitelist
2023-05-18 11:18:23 +10:00
Peter Barker
b90166ab97
Tools: use methods to determine port numbers
2023-05-18 07:53:43 +10:00
Iampete1
15601e4139
Tools: Web: FilterReview: add notch tracking overlay
2023-05-16 10:43:56 +10:00
Iampete1
6443eab963
Tools: Web: FilterReview: fix clear calculation with no data
2023-05-16 10:43:56 +10:00
Iampete1
0acf4e50b8
Tools: Web: FilterReview: move from 3D surface to 2D heatmap
2023-05-16 10:43:56 +10:00
Iampete1
880eac98b2
Tools: Web: FilterReview: fix spectogrph reset
2023-05-16 10:43:56 +10:00
Iampete1
114f9b1311
Tools: Web: FilterReview: fix nan in penultimate frequency
2023-05-16 10:43:56 +10:00
Iampete1
c1aa398977
Tools: web: FilterReview: fix post filter gyro numbering
2023-05-16 10:43:56 +10:00
Peter Barker
f722be9758
autotest: add test for RPLidarA1
2023-05-16 10:15:23 +10:00
Peter Barker
76cf605e11
autotest: add test for RPLidar driver
2023-05-16 10:15:23 +10:00
Peter Barker
96ae4367a2
autotest: correct behaviour when process dies
...
interacting with the dead process isn't going to work
2023-05-13 20:04:50 +10:00
Iampete1
a2f2437434
Tools: web: FilterReview: move to tensorflow FFT for 3x speedup
2023-05-13 18:04:13 +10:00
Iampete1
d54503346f
Tools: Web: FilterReview: move to array functions to remove loops where posible
2023-05-13 18:04:13 +10:00
Iampete1
20d4274e24
Tools: Web: FilterReview: fix bug with none continuous sensor instances
2023-05-13 18:04:13 +10:00
Iampete1
819b867b00
Tools: Web: FilterReview: update to latest version on of parser from https://github.com/Williangalvani/JsDataflashParser
2023-05-13 18:04:13 +10:00
Iampete1
c1fe95f726
Tools: Web: Add FFT batch log review tool
2023-05-11 21:16:21 +10:00
Andrew Tridgell
0b34df3328
autotest: update airspeed test for new message
2023-05-09 11:26:33 +10:00
Peter Barker
74b23adfac
autotest: improve diagnostics when waiting for EKF state
2023-05-08 09:19:10 +10:00
Andrew Tridgell
e492f49470
Tools: use py3 for sim_vehicle.py
2023-05-06 10:09:04 +10:00
Andrew Tridgell
671906ed62
Tools: option to not reconfigure on each sim_vehicle.py run
...
saves some time with rapid small code changes
2023-05-05 11:26:54 +10:00
Peter Barker
40a3e076fc
autotest: bisect-helper.py: improve py2 compatability, improve diagnostics
2023-05-04 13:01:18 +10:00
Peter Barker
237bcf7b7a
Tools: remove old bufsize parameters
2023-05-04 13:00:48 +10:00
Peter Barker
013d7541b7
autotest: add progress file for enable-in-turn
2023-05-04 13:00:16 +10:00
Peter Barker
c0dc3636d2
autotest: stop vehicle from entering RTL instantly when it enters auto
...
Test failure because we instantly reached the waypoint and did the RTL - so the change-mode-to-auto never saw us in auto mode
2023-05-03 19:30:11 -07:00
Peter Barker
cda2e0f30c
Tools: bisect-helper.py: require a failure string if doing a --build
2023-05-02 22:25:56 +10:00
Michael du Breuil
29556ade25
Tools: Support MAX_RPM autotest
2023-05-02 10:23:55 +10:00
Tom Pittenger
61b184781a
Tools: sim_vehicle to only launch one 1455x UDP port
2023-05-02 09:20:39 +10:00
bugobliterator
fcb622c610
autotest: add test for lua modules
2023-04-28 12:36:08 +10:00
Peter Barker
67f137736a
autotest: fix disable-in-turn dependency issue
2023-04-27 13:44:36 +10:00
Andrew Tridgell
0d029ee055
Tools: change autotest to python3
2023-04-21 15:46:24 +10:00
Peter Barker
2271827c9d
autotest: add tests for compass prearms
2023-04-19 14:25:06 +10:00
Iampete1
6659b02e14
Tools: autotest: Plane: expand guided attitude target test
2023-04-18 09:36:06 +10:00
Peter Barker
2529c7fc40
autotest: add test for RESET_MODE_SWITCH
2023-04-18 09:19:20 +10:00
Peter Barker
38390d2840
autotest: allow more time for deepstall text
...
intermittent failures in CI - perhaps due to Plane dynamics changes
2023-04-17 21:26:07 +10:00
Peter Barker
f518c4f4d4
autotest: verify new safety switch state in set_safetyswitch
2023-04-17 13:25:55 +10:00
Peter Barker
558cec573b
autotest: wait ready to arm in autotest
...
AKA avoid dreaded gyros-inconsistent failure
2023-04-16 21:18:36 +10:00
Peter Barker
d0e3bbe9e9
autotest: test_build_options.py: correct deps when enabling-in-turn
2023-04-15 22:15:16 +10:00
Peter Barker
f604eedf65
Tools: sim_vehicle.py: remove old --build-system
...
We haven't supported make for a very long time
2023-04-14 10:28:09 +10:00
Pierre Kancir
f49211b021
Tools: remove old jsbsim python scripts (unused anymore)
2023-04-14 08:23:15 +10:00
Pierre Kancir
31595f2e4d
Tools: remove util.py pymavlink dependency by removing old code
2023-04-14 08:23:15 +10:00
Peter Barker
5cc046b9cc
Tools: AP_Arming ensures mission items present when in auto mode
...
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2023-04-14 07:49:54 +10:00
Peter Barker
54aca7dc0d
autotest: exempt sailboats from initial location check
...
we have a sanity check that when you reboot a vehicle that soon afterwards the vehicle is in the place we expect it to start.
That's fine for most vehicles, which stay put. But we start the ship simulation with wind, so it can actually drift before we get around to checking its location. Simply skip this check for now (we could, perhaps, allow for a very large radius instead?)
2023-04-13 07:05:38 +10:00
Randy Mackay
322ef64aad
Tools: ScriptMountPOI test uses applet directory
2023-04-13 07:04:22 +10:00
Andrew Tridgell
402de293d6
Tools: text messages and more defines
2023-04-11 10:31:31 +10:00
Peter Barker
b620ba23a9
autotest: correct implicit reboot after a failed test
...
correct problem where we only rebooted if the vehicle was armed after a failed test.
Should correct cascading failures after some tests
2023-04-11 00:29:45 +10:00
Peter Barker
3863183996
autotest: give Rover longer to arrive home
...
vagaries of interaction with Python script means we need to give this more time when running balancebot
2023-04-11 00:25:53 +10:00
Andrew Tridgell
b24adf04f2
autotest: allow sitl periph GPS to run under valgrind and gdb
2023-04-10 14:46:54 +10:00
Peter Barker
465e8839c8
Tools: validate features are removed when we compile them out
2023-04-09 22:04:05 +10:00
Peter Barker
9f2aef4c97
autotest: allow other prearm failures while waiting for estop prearm
...
accels inconsistent was popping up in here.
We can ignore that - we only care we won't arm because of the estop being active. This will also save a bit of time with the removal of the raw delay-for-10-seconds
2023-04-09 20:48:34 +10:00
Peter Barker
ae37d76f2d
autotest: allow other prearm failures while waiting for estop prearm
...
accels inconsistent was popping up in here.
We can ignore that - we only care we won't arm because of the estop being active. This will also save a bit of time with the removal of the raw delay-for-10-seconds
2023-04-09 20:48:34 +10:00
Peter Barker
d8bc223fe4
autotest: param_parse.py: recurse, don't glob in lua script dirs
...
many scripts are now categoriesed e.g. Aerobatics
2023-04-05 10:07:19 +10:00
Peter Barker
10c74f3a44
sim_vehicle.py: consolidate vehicle aliases into once place
2023-03-30 20:16:39 +11:00
bugobliterator
50a760d8a5
Tools: add --enable-dronecan-tests option to autotest
2023-03-29 17:16:39 +11:00
bugobliterator
c90cf03619
autotest: replace sitl_32bit with force_32bit
2023-03-29 17:16:39 +11:00
tzarjakob
6fa14ffe87
Tools: configuration of Precision Landing for custom build server
2023-03-27 09:04:07 +11:00
Ryan Friedman
d1639f5d58
autotest: Add option to enable dds
...
* Disabled by default
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
Co-authored-by: Arsh Pratap <arshpratapofficial@gmail.com>
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2023-03-22 09:22:36 +11:00
Iampete1
65374a01a3
Tools: autotest: param metadata: allow parsing multi line values
2023-03-21 11:41:18 +11:00
Peter Barker
f12777f369
autotest: add test for GuidedYawRate being indpendent of set-rate rate
...
A bug is being fixed where we couldn't achieve the maximum rate due to the input speed of the guided command.
This makes sure the rate achieved is independent of the rate at which the attitude rate is being set
2023-03-21 08:23:12 +09:00
bugobliterator
e2509b7c6b
autotest: add support for setting number of auxiliary IMUs
2023-03-21 10:04:16 +11:00
Pierre Kancir
fa2c7113c9
Tools: enable back DriveMaxRCIN test as rover sitl gsf issue is solved
2023-03-15 19:31:26 +11:00
Andy Piper
7dc6dee5a0
autotest: test Yaw D autotune
2023-03-14 11:01:31 +11:00
Peter Barker
924a1b7810
Tools: add documentation for SIM_OPOS* and SIM_FLOAT_EXCEPT
2023-03-14 10:44:28 +11:00
Peter Barker
7563dcd916
autotest: correct race condition in spiral test
2023-03-11 20:17:48 +11:00
Peter Barker
e967fad32a
autotest: augment IE24 test with fuel-remaining test
2023-03-11 11:50:20 +11:00
Peter Barker
db4f974c64
autotest: fix --list-subtests
2023-03-11 10:49:06 +11:00
Peter Barker
3a5567265a
autotest: stop printing test names out when autotest.py run
...
it's just garbage for most people. There's always --list-tests or whatever to find these
2023-03-11 10:49:06 +11:00
Peter Barker
b552632b01
Tools: add link to firmware download stats on firmware.ardupilot.org
2023-03-10 14:50:25 -08:00
Andrew Tridgell
1530dbde3d
autotest: added test of BRD_SD_MISSION
...
check that we can create and compare 4368 WPs
2023-03-10 14:13:55 +11:00
Jani Hirvinen
852e20fa6f
Tools: Adding Eggemoen flying field coords
2023-03-10 10:20:18 +11:00
CharlieBurge
62119d5bbe
Copter: remove check on pause state
2023-03-09 18:13:38 +00:00
CharlieBurge
224e7c578f
Copter: pause/resume reporting test
2023-03-09 18:13:38 +00:00
Peter Barker
c7025db356
Tools: add script for validating the board_list.txt file
2023-03-08 11:51:36 -08:00
Peter Barker
a7eeb35150
Tools: remove defunct build-with-disabled-features.py
...
Replaced with test_build_options.py
2023-03-08 18:28:52 +11:00
Peter Barker
7fe547cfce
Tools: add support for MAV_CMD_DO_SET_ROI_NONE
2023-03-07 08:06:01 +09:00
Randy Mackay
f997b09358
Tools: autotest correction for sf45b
2023-03-01 18:22:22 +11:00
Randy Mackay
bfa15133c7
Tools: autotest fixes for rover
...
fixes camera mission, set-message-interval, request-message,
SendToComponents
2023-03-01 18:18:51 +11:00
Randy Mackay
c33de6c872
Tools: autotest fix for plane TestRCCamera
2023-03-01 18:18:51 +11:00
Peter Barker
c7fe8f7c33
autotest: add test for transitioning with disabled airspeed sensor
2023-02-28 21:43:09 +11:00
Andrew Tridgell
a24763a2ba
autotest: added a test for landing a copter with significant AHRS trim
...
this fails with EKF3
2023-02-28 17:16:39 +11:00
Shashwat Ganesh
11fb7c64e0
Tools: plane: GCSFailsafe test: cleanup timeouts
2023-02-27 07:56:25 +11:00
Shashwat Ganesh
2ffae80866
Tools: plane: GCSFailsafe test: cleanup parameters
2023-02-27 07:56:25 +11:00
Peter Barker
1e325d4aaa
autotest: remove default value for paramValue in setGCSfailsafe
...
All callers were supplying a value, and it isn't clear why zero makes a
good default.
2023-02-26 17:31:11 +11:00
Peter Barker
b287476cc6
Tools: autotest: add a test for Rover's INITIAL_MODE
2023-02-26 16:41:32 +11:00
Shashwat Ganesh
dba76d2c8b
Tools: plane: test gcs failsafe: FBWA and Parachute
2023-02-26 09:56:47 +11:00
Shashwat Ganesh
ea206670c4
Tools: plane: test gcs failsafe: RTL
2023-02-26 09:56:47 +11:00
Andrew Tridgell
4c6648fada
autotest: added VTOLQuicktune test
...
ensure this script doesn't break
2023-02-24 09:43:41 -08:00
Pierre Kancir
8628fd998f
Tools: Copter: add test for FS_GCS_TIMEOUT
2023-02-24 09:41:17 -08:00
Pierre Kancir
468356d513
Tools: rover: implement test_gcs_failsafe
2023-02-24 09:41:17 -08:00
Pierre Kancir
0b7ef942b4
Tools: move setGCSfailsafe in common
2023-02-24 09:41:17 -08:00
Peter Barker
df06e85450
autotest: fix arming checks test
...
waity for accels/gyros to settle
2023-02-24 09:21:42 +11:00
Peter Barker
e494c40b61
autotest: correct fettec test
...
need to wait for accels/gyros to be healthy
2023-02-24 09:21:42 +11:00
Peter Barker
2475ee0239
autotest: add test for gyro consistency check
2023-02-24 09:21:42 +11:00
Peter Barker
421c382bcc
autotest: add test for accel consistency check
2023-02-24 09:21:42 +11:00
Peter Barker
8ce904559d
autotest: correct armable time calculation
2023-02-24 09:21:42 +11:00
Tom Pittenger
f96a3176ab
autotest: more jumptag test
2023-02-22 05:33:38 -08:00
Peter Barker
20279417e8
autotest: more tests for jump tags
2023-02-22 05:33:38 -08:00
Peter Barker
edb301a4d0
autotest: add tests for JumpToTag
2023-02-22 05:33:38 -08:00
Tom Pittenger
617da9a873
Tools/autotest: add JUMP_TAG support
2023-02-22 05:33:38 -08:00
Peter Barker
648fe94d2e
Tools: add and use AP_COMPASS_AK09916_ENABLED
2023-02-22 19:40:13 +11:00
Peter Barker
357a39adba
autotest: add test for flying mission twice back-to-back
2023-02-22 08:57:59 +11:00
Peter Barker
fab1c47b27
autotest: add test for calibrating different nos of airspeed sensors
...
only success is checked for, not the calibration values
2023-02-21 17:07:41 +11:00
Peter Barker
f5bda98a05
autotest: adjust for new emission of IN_PROGRESS mavlink messages
...
ignored for the most part, but explicit test added that we receive one when doing cal
2023-02-21 17:07:41 +11:00
Peter Barker
c34c60e852
autotest: add nasty mission tests
2023-02-20 21:20:20 +11:00
Bill Geyer
f7317966dc
Tools: autotest for Tradheli turbine start feature
2023-02-19 06:39:12 -05:00
Andrew Tridgell
d00290edfe
autotest: added AltResetBadGPS test
...
this tests the bug in handling a glitching GPS with low accuracy with
AHRS alt reset
2023-02-19 10:45:42 +11:00
Tom Pittenger
0ff53fa634
Tools/autotest: locations.txt add Portmoak
2023-02-18 05:47:18 -08:00
Bill Geyer
713bc5b86e
Tools: tradheli autotest for manual autorotation power recovery
2023-02-17 12:52:39 -05:00
Peter Barker
31de6fd0b5
autotest: tidy LUA scripting internal tests
2023-02-17 12:54:49 +11:00
Peter Barker
1aabcbd4b9
autotest: add more install-script-in-context methods
2023-02-17 12:54:49 +11:00
Peter Barker
d426c73d0e
autotest: rename context's example_scripts to installed_scripts
2023-02-17 12:54:49 +11:00
Peter Barker
69b8e30f28
autotest: rename remove_example_script to remove_installed_script
2023-02-17 12:54:49 +11:00
Peter Barker
306d8360fb
autotest: tidy scripting examples test
2023-02-17 12:54:49 +11:00
Tom Pittenger
9ab5613bb0
Tools/autotest: update Williams locations.txt
2023-02-16 16:18:56 -08:00
Peter Barker
19ccf08412
autotest: add test for mount-poi.lua
2023-02-17 10:04:49 +11:00
Peter Barker
6678689312
autotest: add install_example_script_context
2023-02-16 11:57:18 +11:00
Bill Geyer
9b60072a04
Tools:Autotest: tradheli improvements
...
set servo8 min-max for heli default params
improve heli-dual default params
modified dual heli default params for new sitl model
allow spool up time for heli takeoff
2023-02-13 18:32:37 -05:00
Andrew Tridgell
2d127c27c3
Tools: throw an error on duplication parameters in libraries
2023-02-12 07:02:15 +11:00
Andrew Tridgell
01d72aef17
Tools: cope with not being in top directory
...
autotest runs from ../buildlogs
2023-02-11 12:56:05 +11:00
Andrew Tridgell
62b7d0276e
Tools: don't put lua parameters in rst output
2023-02-11 12:56:05 +11:00
Andrew Tridgell
51a6c69f9b
Tools: support parameter docs from lua applets and drivers
2023-02-11 12:56:05 +11:00
Shiv Tyagi
5400aefd82
Tools: add test for duplicate labels in build_options.py
2023-02-11 12:31:02 +11:00
Tom Pittenger
0e94e4f0df
Tools: change WSL2 host IP detection method from route to ip
2023-02-07 14:41:06 -08:00
Peter Barker
17429bb687
autotest: reboot after DCMFallback test
...
EKF3 can remain annoyed for a very, very long time after disarm
2023-02-07 19:24:59 +11:00
Iampete1
82bcaae9ad
Tools: autotest: logger_metadara: parse `@FieldBits` to new bitmask format and ouput bitmask in xml
2023-02-06 23:44:21 +00:00
Peter Barker
d415d3f96d
Tools: add and use AP_COMPASS_AK8963_ENABLED
2023-02-07 10:21:06 +11:00
Pierre Kancir
f8187984a7
Tools: fix flake8 checks
2023-02-04 12:41:06 +11:00
Andrew Tridgell
7a4483b091
SITL: new XPlane backend
...
this makes use of DRefs to greatly improve XPlane support. It only
supports XPlane 11 and later
The key change is the use of a JSON file to map ArduPilot output
channels to DataRefs, and map raw joystick inputs to RC inputs
this gets rid of the awful throttle hack handling, and allows for
control of a much wider range of aircraft
2023-01-31 11:22:08 +11:00
Andrew Tridgell
34791eb324
Tools: added xplane json mappings for plane and heli
2023-01-31 11:22:08 +11:00
Peter Barker
70b77f0f7d
autotest: add AP_COMPASS_LSM303D_ENABLED to must-have drivers for CubeOrange
2023-01-31 11:08:28 +11:00
Peter Barker
fa64415446
autotest: correct generator of rst in logger metadata
2023-01-26 15:41:32 +11:00
Peter Barker
3708ed7a45
Tools: add script to extract enumeration as metadata
2023-01-25 19:50:34 +11:00
Andy Piper
af9aed1017
autotest: correct FFT gyro averaging tests
2023-01-24 10:56:33 +11:00
Ian
15ae88db9e
autotests: add --sim-address option to sim_vehicle
...
By passing --sim-address to sim_vehicle it is passed to SIM_Cmdline.cpp
and sets the address of the simulator. This is useful when running the
siim on a remote machine such as WSL2.
2023-01-22 18:19:38 +11:00
Peter Barker
13e3556e18
autotest: document SIM_ESC_TELEM
2023-01-18 18:07:23 +11:00
Peter Barker
773d7cb65c
autotest: disable simulated esc telemetry for FETtecESC tests
2023-01-18 18:07:23 +11:00
Peter Barker
8e33476bfd
autotest: test EPM gripper
2023-01-18 10:09:23 +11:00
Peter Barker
ccd700a990
autotest: fix whitelisted parameter list
...
move to whitelist crossed with another PR which breaks CI
2023-01-17 21:19:49 +11:00
Peter Barker
d533517fc4
autotest: create whitelist for undocumented SIM_ parameters
...
Rather than creating a blanket exception for SIM_ parameters, have a whitelist of known-undocumented parameters.
This will create a ratchet where new SIM_ parameters must be documented.
2023-01-17 11:23:40 +11:00
Henry Wurzburg
8806088404
Tools: make MAG params consistent names
2023-01-17 08:45:30 +11:00
Peter Barker
2b2bd2b85b
autotest: add a test for VTOL land spiral code
2023-01-15 21:32:27 +11:00
Peter Barker
ea167d5bd8
autotest: create fresh fly_mission suitable for other missions
...
the fly_mission in quadplane was very-much Dalby-specific
2023-01-15 10:16:17 +11:00
Peter Barker
b441c24eaa
autotest: use percentage error when determining if z is preserved
...
floating point storage means an absolute error doesn't work
2023-01-14 23:23:29 +11:00
Peter Barker
52f6810d50
Tools: param_parse.py: sort SIM_ parameters into the output files
...
primarily to make the Wiki look nicer
2023-01-12 13:46:22 +11:00
Andy Piper
d1b272fab7
autotest: anti-gravity test using THR_G_BOOST boost
2023-01-11 18:59:52 +11:00
Peter Barker
bd850b9034
param_parse.py: emit rst heading only for SIM_, no children
2023-01-10 14:39:45 +11:00
Peter Barker
8de890bc7d
param_parse.py: emit SIM_ parameters along with everthing else
2023-01-10 14:39:45 +11:00
rishabsingh3003
1c49373088
Tools: Add autotest for checking terrain db pre arm for copter auto mission
2023-01-10 13:22:44 +11:00
Peter Barker
f20769057b
autotest: give WindEstimate more time to converge
...
this was right on the edge
2023-01-06 15:06:22 +11:00
Tom Pittenger
401f55254b
Tools: fix wsl2 check in sim_vehicle to match uploader.py
2023-01-06 11:27:52 +11:00
Peter Barker
d9564d973d
autotest: fix un-set variable problem in verify_innov
2023-01-06 11:11:22 +11:00
Tom Pittenger
c68bab44a5
Tools: fix wsl2 sim_vehicle.py host IP check
2023-01-05 19:45:41 +09:00
Peter Barker
f5320f1691
autotest: rover: remove pointless try/except block
2023-01-05 07:29:44 +11:00
Tom Pittenger
642ebb44cf
Tools/autotest: automate sim_vehicle in WSL2
2023-01-04 20:03:34 +11:00
Peter Barker
1a262010ff
autotest: simplify Plane Rangefinder test
...
this was written before there was an implicit context and reboot-on-failure at the level calling these tests
2023-01-04 18:29:41 +11:00
Peter Barker
128a6430de
autotest: add test for AHRS backend wind estimates
2023-01-04 12:30:27 +11:00
Peter Barker
f0641f2734
Tools: implement parameter CopyFieldsFrom and use it
2023-01-03 11:08:43 +11:00
Iampete1
7b171867af
Tools: autotest: set new ARSPD_ENABLE param where needed
2023-01-03 10:17:56 +11:00
Iampete1
e4f3720e9b
Tools: update for new airspeed tube order param name
2023-01-03 10:17:56 +11:00
Peter Barker
7d38164176
autotest: add simple test for LoiterAltQLand
2022-12-31 10:58:19 +11:00
Leonard Hall
fea86f78ca
AutoTest: Increase mission timeout to account for lower corner acceleration
2022-12-30 17:03:32 +09:00
Peter Barker
d23be442a1
test_build_options.py: add a list of must-have-defines for a board to compile
...
these are likely to be barometers at least initially...
2022-12-30 10:59:52 +11:00
Peter Barker
6651818215
autotest: test_build_options.py: correct invocation of test_enable_features
2022-12-30 10:59:52 +11:00
Andy Piper
60dcb0423a
autotest: add basic FFT post-filter test
...
record gyro data in FFT postfilter test
check post-filter gyro logging and change notch settings for post-filter FFT
add motor noise test
FFT SNR now has sensible default for post-filter
2022-12-28 18:14:56 +11:00
Peter Barker
cbecb20614
autotest: param_parse.py: allow Values and Bitmasks to span multiple lines
2022-12-28 13:21:18 +11:00
Peter Barker
a71911c19f
autotest: ensure vehicle is armed before issuing takeoff command
...
sending the arm command isn't sufficient if there are other arming problems.
Caught a test failing when throttle was found to be high - I think the rc(3, 1700) was managing to have effect before we processed the arm command because of the way the input queues to ArduPilot SITL work
2022-12-27 11:32:19 +11:00
Peter Barker
89ecd8fb17
autotest: create a context-per-check whentesting motors blocked
...
without this all subsequent tests will find the string in the context's collection of statustexts. So use a context-per-mode
2022-12-27 11:32:19 +11:00
Peter Barker
f44a50bdd8
autotest: use epsilon when testing for zero variance in EK3_RNG_USE_HGT
2022-12-22 21:12:39 +11:00
Randy Mackay
5148698dc8
Tools: correct autotest copter-gimbal .parm
2022-12-22 10:05:44 +11:00
Andrew Tridgell
3a725ad1b0
autotest: removed deprecated distutils
...
prevent deprecation warning
2022-12-20 11:14:05 +11:00
Leonard Hall
aedac8a6d0
Model: Callisto param update Yaw D
2022-12-20 08:48:43 +09:00
Leonard Hall
350e18fb94
Model: Callisto param update
2022-12-19 07:59:48 +09:00
Peter Barker
274ebbaa44
Tools: add instructions on how to get feature-size results
...
also create a csv file with the sizes in it
2022-12-18 09:19:12 +11:00
Peter Barker
c95daeea3e
autotest: fix race condition in NeedEKFToArm
...
EKF may still be active when arming is first attempted
2022-12-16 11:06:56 +11:00
Gone4Dirt
01481b2ec4
Autotest: Add copter weathervane tests
2022-12-14 16:08:20 -05:00
Andy Piper
5358b4d8de
autotest: add up and down components to baro compensation test
2022-12-14 19:19:58 +11:00
Peter Barker
b6f1891f9f
autotest: add test for loiter-to-alt
2022-12-13 11:41:23 +11:00
Peter Barker
021cb75d5b
Tools: autotest: use forced reboot argument
2022-12-06 11:20:08 +11:00
Peter Barker
dfb88839d3
autotest: loosen channel-value constrain in Soaring test
...
test is flapping here, channel value is moving in right direction
2022-12-02 12:12:32 +11:00
Peter Barker
dcf41f2396
autotest: add additional tests for private channels
2022-11-29 10:32:02 +11:00
Peter Barker
d1cff53ba1
autotest: add test for mavlink private-channel
2022-11-29 10:32:02 +11:00
Peter Barker
c3efc78f0d
autotest: fix warning about deprecated distutils.dir_utils.copy_tree
2022-11-29 10:32:02 +11:00
Andrew Tridgell
76b83c3d57
autotest: fixed aerobatics test for new Schedules location
2022-11-28 10:40:50 +11:00
Andrew Tridgell
2409b69245
autotest: adjust aerobatics test for new airshow schedule
2022-11-28 06:23:29 +11:00
Andrew Tridgell
fc137d3bdc
autotest: update plane-3d SCR params
...
need more memory for aerobatics
2022-11-26 10:54:39 +11:00
Henry Wurzburg
ef65274b9c
Tools: add synthetic current sensor,fix SITL current
2022-11-24 06:53:35 +11:00
Peter Barker
ce6763cc91
autotest: add test for Plane MANUAL_CONTROL handling
2022-11-23 19:33:46 +11:00
Peter Barker
65e8f153a3
autotest: add a test for EK3_RNG_USE_HGT
2022-11-23 18:40:58 +11:00
Paul Riseborough
740b7ba041
autotest: allow for reduced overspeed in DO_CHANGE_SPEED_mission plane test
...
Plane was overspeeding more in legacy TECS which meant it arrived at the test waypoint sooner.
2022-11-18 05:43:59 +11:00
Paul Riseborough
14498001f6
autotest: Reduce flare time advance for plane autotest
2022-11-18 05:43:59 +11:00
Peter Barker
1cfe409189
autotest: tighten tolerances on beacon test
...
7m is actually pretty much all of the required movement for this fence test!
2022-11-15 18:45:42 +11:00
Peter Barker
d0ce2ca8f2
autotest: use implicit context for AutoTuneSwitch
...
the wrapper adds nothing
2022-11-15 16:45:00 +11:00
Randy Mackay
391bae858b
Tools: balancebot test does not set ATC_BAL_SPD_FF
...
also update autotest balance bot tuning
2022-11-15 09:00:57 +09:00
Peter Barker
bac96363f4
autotest: add basic tests for Copter sprayer
2022-11-15 08:45:42 +09:00
Andrew Tridgell
38a9269822
autotest: lower aerobatics speedup to 5
2022-11-12 10:45:18 +11:00
Andrew Tridgell
46d41e5995
autoest: fixed spelling
...
and adjust max error for aerobatics
2022-11-12 07:34:21 +11:00
Andrew Tridgell
8726962036
autotest: tight turns for plane-3d
2022-11-11 16:00:09 +11:00
Andrew Tridgell
f2da06ebdf
autotest: adjust aerobatics test for BarrellRoll
2022-11-11 14:19:44 +11:00
Andrew Tridgell
4ab0919d63
autotest: run aerobatics at slower speedup
...
need more cycles for lua
2022-11-11 08:25:33 +11:00
Andrew Tridgell
0abeca15e2
autotest: added scripting aerobatics test
2022-11-10 13:53:15 +11:00
Andrew Tridgell
98145f7a3f
Tools: moved plane-3d.parm to models directory
2022-11-10 10:30:53 +11:00
Peter Barker
8777d68ac1
autotest: drain self.mav while waiting on other link
...
In the short period of time it takes for us to get organised/draining mavlink connections, the ArduPilot process might block writing to the primary mavlink connection - in which case we'll never get the message we requested.
Should solve
2022-08-31T23:17:43.6904119Z AT-0227.6: waiting for a message - any message....
2022-08-31T23:17:43.6904958Z AT-0227.6: Received (ATTITUDE {time_boot_ms : 3146, roll : 0.00013471684360411018, pitch : -4.076504410477355e-05, yaw : -2.1274349689483643, rollspeed : 6.679168291157112e-05, pitchspeed : 3.297374496469274e-05, yawspeed : 9.125166684498254e-07})
2022-08-31T23:17:43.6905505Z AT-0227.6: Waiting for mission count of (3) from (1:1) to (243:250)
2022-08-31T23:17:43.6905909Z AT-0227.6: Asserted mission count (type=2) is 3 after 0.100000s
2022-08-31T23:17:43.6906252Z AT-0227.6: Get first item on new link
2022-08-31T23:17:43.6906620Z AT-0289.2: Received exception (Did not receive MISSION_ITEM_INT
2022-08-31T23:17:43.6907047Z Traceback (most recent call last):
2022-08-31T23:17:43.6907386Z File "/__w/ardupilot/ardupilot/Tools/autotest/rover.py", line 3067, in test_rally
2022-08-31T23:17:43.6907719Z m2 = self.get_mission_item_int_on_link(
2022-08-31T23:17:43.6908080Z File "/__w/ardupilot/ardupilot/Tools/autotest/rover.py", line 2288, in get_mission_item_int_on_link
2022-08-31T23:17:43.6908469Z raise NotAchievedException("Did not receive MISSION_ITEM_INT")
2022-08-31T23:17:43.6908841Z common.NotAchievedException: Did not receive MISSION_ITEM_INT
2022-08-31T23:17:43.6909118Z )
2022-08-31T23:17:43.6909468Z AT-0289.2: Exception caught: Did not receive MISSION_ITEM_INT
2022-11-09 09:17:08 +11:00
Peter Barker
b3b0abe6c1
Tools: bisect_helper.py: update submodules when bisecting build
2022-11-08 09:01:12 +11:00
Peter Barker
3a859b4173
Tools: fix bisect helper
...
Python3 made stringification different, showing up this problem
2022-11-08 09:01:12 +11:00
Peter Barker
49ec94af1b
autotest: add test for manual throttle control for ICEngine
2022-11-08 08:59:56 +11:00
Andrew Tridgell
0fbeff58fc
Tools: update plane-3d tune
2022-11-04 07:17:30 +11:00
Peter Barker
4249fc04b7
autotest: tidy advanced failsafe test
2022-10-25 11:31:14 +11:00
Peter Barker
6d19f77325
autotest: add missing unpause_sitl() calls
2022-10-22 15:14:55 +11:00
Peter Barker
cafce7671d
autotest: slow down specific tests so they pass
2022-10-22 15:14:55 +11:00
Peter Barker
02a6f71df4
autotest: change Copter default speedup time to 100
2022-10-22 15:14:55 +11:00