Commit Graph

703 Commits

Author SHA1 Message Date
Leonard Hall 250a444e57 AP_MotorsCoax: fixes to stab patch
Fix throttle_lower flag
Also some formatting changes
2016-04-01 11:59:30 +09:00
Randy Mackay 20565580ed AP_MotorsCoax: remove disabling of output ch7 2016-04-01 11:59:30 +09:00
Randy Mackay 63fefae7cf AP_MotorsCoax: use calc_pwm_output_1ot1 instead of local calc_pivot_radio_output 2016-04-01 11:59:30 +09:00
Leonard Hall 840e60c930 AP_MotorsSingle: fixes to stab patch
Fixes throttle_lower flag
Also some formatting changes
2016-04-01 11:59:30 +09:00
Randy Mackay af9b18329c AP_MotorsSingle: use calc_pwm_output_1to1 instead of local calc_pivot_radio_output 2016-04-01 11:59:30 +09:00
Randy Mackay c4b88aafef AP_MotorsHeli: swash and tail servo objects moved into class 2016-04-01 11:59:30 +09:00
Randy Mackay 4f1e62d551 AP_MotorsHeli: remove reset_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay b5593431bf AP_MotorsHeli_Single: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay 9790245bf1 AP_MotorsHeli: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay a39bbc5421 AP_MotorsHeli: servo_test in range -1 to 1 2016-04-01 11:59:30 +09:00
Randy Mackay a42706bdcc AP_Motors: remove unused example sketch to test timing
This test was only important on the slower AVR boards
2016-04-01 11:59:30 +09:00
Randy Mackay a3450b712c AP_Motors: fix example sketch 2016-04-01 11:59:30 +09:00
Leonard Hall 753b72b28c AP_MotorsY6: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 13ab3ecfea AP_MotorsQuad: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 7ac4fc5569 AP_MotorsOctaQuad: call normalise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall e182c10625 AP_MotorsOcta: call noramlise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 733b89cf3c AP_MotorsHexa: call noramlise_rpy_factors in motor setup 2016-04-01 11:59:30 +09:00
Leonard Hall 8f8eb7e214 AP_MotorsMatrix: add normalise_rpy_factors 2016-04-01 11:59:30 +09:00
Randy Mackay e7ba5ae451 AP_MotorsMulticopter: fix get_hover_throttle_as_high_end_pct 2016-04-01 11:59:30 +09:00
Randy Mackay 4514e8d100 AP_MotorsHeli: remove slow_start 2016-04-01 11:59:30 +09:00
Randy Mackay c41a5dc3bd AP_MotorsMulticopter: remove slow_start
This has been replaced with the spool logic feature
2016-04-01 11:59:30 +09:00
Randy Mackay b436dde60c AP_Motors: remove slow_start
This has been replaced with the spool logic feature
2016-04-01 11:59:30 +09:00
Randy Mackay e863f0b9c0 AP_MotorsHeli: use AP_Motors set_radio_passthrough in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 68a6408a23 AP_MotorsMulticopter: remove set_radio_passthrough
This has been moved up to the AP_Motors class
2016-04-01 11:59:30 +09:00
Randy Mackay 5ba3a6c536 AP_Motors: add set_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay fe4733121d AP_MotorsHeli_Single: ext_gyro_gain in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay e1e4e37c92 AP_MotorsHeli_Single: use RSC class's get_idle_output function
No functional change
2016-04-01 11:59:30 +09:00
Randy Mackay 2cdc5da226 AP_MotorsHeli_Single: rotor speed functions in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 68945df45d AP_MotorsHeli_Single: write_aux uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay b3334c3ae5 AP_MotorsHeli: rotor speed function in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 832a226f13 AP_MotorsHeli_RSC: rotor speeds in 0 to 1 range
Also move recalc_scalers functionality into update_rotor_ramp and update_rotor_runup
2016-04-01 11:59:30 +09:00
Randy Mackay 4775843e3c AP_MotorsHeli_RSC: add get_idle_output accessor 2016-04-01 11:59:30 +09:00
Randy Mackay a63dba5b13 AP_MotorsHeli_Single: servo_test becomes protected 2016-04-01 11:59:30 +09:00
Randy Mackay cefd114964 AP_MotorsHeli_Single: remove unused accessors for tail_type, ext_gyro_gain, phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay f2fc39943e AP_MotorsHeli_Single: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 381f538aca AP_HotorsHeli_Single: remove unused definition 2016-04-01 11:59:30 +09:00
Randy Mackay 27fed39671 AP_MotorsHeli_Single: remove roll_scalar, pitch_scalar 2016-04-01 11:59:30 +09:00
Randy Mackay 756236af35 AP_MotorsHeli: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 16ac92be82 AP_MotorsHeli: remove unused definitions 2016-04-01 11:59:30 +09:00
Randy Mackay aeef6692cb AP_MotorsHeli: remove unused roll_scalar, pitch_scalar, collective_range 2016-04-01 11:59:30 +09:00
Randy Mackay 1a690772e1 AP_Motors: example sketch outputs headers 2016-04-01 11:59:30 +09:00
Randy Mackay 361b64f817 AP_Motors: example sketch uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay d4998089c8 AP_Motors: example sketch provides roll, pitch, yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 93597d152f AP_Motors: example sketch can test helicopter 2016-04-01 11:59:30 +09:00
Randy Mackay 47873c1d34 AP_MotorsHeli: fix RSC_SETPOINT param description 2016-04-01 11:59:30 +09:00
Randy Mackay bcbe6b279e AP_MotorsHeli: explicitely set ServoControlModes enum
Non functional change but this enum is tied to a parameter value so the exact value is important
2016-04-01 11:59:30 +09:00
Randy Mackay 8febcedf4b AP_MotorsHeli: remove unnecessary static declaration 2016-04-01 11:59:30 +09:00
Randy Mackay f022e504b0 AP_MotorsHeli: remove unused get_collective_mid and out methods 2016-04-01 11:59:30 +09:00
Randy Mackay a18722a2fc AP_MotorsHeli: output_min uses new move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 1197a439af AP_MotorsHeli: move_actuators to -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 8057d2fc58 AP_MotorsMatrix: remove unnecessary virtual declarations 2016-04-01 11:59:30 +09:00
Randy Mackay 71866be652 AP_MotorsHeliSingle: move_yaw in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay f6120b801b AP_MotorsHeliSingle: move_actuators in -1 to +1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 61cf8e1698 AP_Motors: add calc_pwm_output_1to1 and 0to1
Convenience functions to convert from -1 to +1 input to pwm output
2016-04-01 11:59:30 +09:00
Randy Mackay 56f05e6a96 AP_Motors: add set_desired_spool_state 2016-04-01 11:59:30 +09:00
Randy Mackay 2716126e40 AP_MotorsMulticopter: use desired_spool from AP_Motors class 2016-04-01 11:59:30 +09:00
Randy Mackay 93d1f1969c AP_MotorsMulticopter: remove set_desired_spool_state
This is being moved to AP_Motors
2016-04-01 11:59:30 +09:00
Randy Mackay 4dd4d38b9b AP_MotorsMulticopter: fix output_to_motors definition 2016-04-01 11:59:30 +09:00
Randy Mackay 3ae9b606ff AP_Motors: remove unnecessary output_to_motors declaration
This is declared down in the AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Randy Mackay f2ff9e34ad AP_Motors: remove output_armed_zero_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall 879e12ba43 AP_MotorsHeli_Single: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 97f0b00e3e AP_MotorsHeli: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall b701c109cf AP_MotorsSingle: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 1a308c2eb8 AP_MotorsCoax: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 4d208fcd47 AP_MotorsTri: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 027284fba0 AP_MotorsMatrix: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall ae4e495698 AP_Motors: roll, pitch, yaw input in -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 90b3d7ca39 AP_Motors: example sketch tests stab patch more thoroughly 2016-04-01 11:59:30 +09:00
Leonard Hall cef3f42df5 AP_Motors: fix example make.inc 2016-04-01 11:59:30 +09:00
Leonard Hall d2a1cdf906 MotorsHeli: replace throttle_control_input with throttle_in
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
2016-04-01 11:59:30 +09:00
Leonard Hall f02e8f8e01 AP_MotorsHeli: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 5cd4b78918 AP_MotorsSingle: remove reverse parameters
No longer necessary because we can use individual servo reverse params
2016-04-01 11:59:30 +09:00
Leonard Hall 6264159f4d AP_MotorsSingle: move servo objects into Single class 2016-04-01 11:59:30 +09:00
Leonard Hall 21d304b86d AP_MotorsSingle: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall 24a100e429 AP_MotorsSingle: stability patch uses 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall cffdced838 AP_MotorsSingle: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall f53d6e95e8 AP_MotorsSingle: rename _rev_roll to _roll_reverse
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
2016-04-01 11:59:30 +09:00
Leonard Hall 4db73d86af AP_MotorsSingle: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall 46ab198ebc AP_MotorsSingle: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 40c18891cf AP_MotorsCoax: remove reverse parameters
No longer necessary because we can use individual servo reverse params
2016-04-01 11:59:30 +09:00
Leonard Hall 260006dcb3 AP_MotorsCoax: move servo objects into Coax class 2016-04-01 11:59:30 +09:00
Leonard Hall 110d41ee24 AP_MotorsCoax: fix SV_SPEED param description 2016-04-01 11:59:30 +09:00
Leonard Hall 8d8f52b22f AP_MotorsCoax: output_to_motors implements spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall b85c20bb65 AP_MotorsCoax: stability patch in 0 to 1 range
Also removes setting of limits in stability patch
sets outputs for additional 2 servos
2016-04-01 11:59:30 +09:00
Leonard Hall 7df9b2eb8c AP_MotorsCoax: support 4 servo outputs 2016-04-01 11:59:30 +09:00
Leonard Hall 7d6c6b5556 AP_MotorsCoax: rename _rev_roll to _roll_reverse
Also rename _rev_pitch to _pitch_reverse and _rev_yaw to _yaw_reverse
2016-04-01 11:59:30 +09:00
Leonard Hall 5cb44901ff AP_MotorsCoax: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall 3df52aad5f AP_MotorsCoax: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 45a16d6dad AP_MotorsTri: implement output_to_motors for spool logic 2016-04-01 11:59:30 +09:00
Leonard Hall d0a7579fa0 AP_MotorsTri: stability patch in 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 80f77bc30b AP_MotorsTri: output_min does not set limits 2016-04-01 11:59:30 +09:00
Leonard Hall ba659be5cb AP_MotorsTri: rename _yaw_servo_reverse to _yaw_reverse 2016-04-01 11:59:30 +09:00
Leonard Hall 8c4d6d6fbe AP_MotorsTri: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall a2fdcfaf3f AP_MotorsTri: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 397940a9a4 AP_MotorsMatrix: implement output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall cdec8f3387 AP_MotorsMatrix: remove output_disarmed 2016-04-01 11:59:30 +09:00
Leonard Hall b965857229 AP_MotorsMatrix: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall d0c6d087a5 AP_MotorsMatrix: do not set limits in output_min 2016-04-01 11:59:30 +09:00
Leonard Hall 3fef60da45 AP_MotorsMatrix: stability patch in 0 to 1 range
Includes storing motor level thrusts to _thrust_rpyt_out
rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired
rename _throttle_thr_mix to _throttle_rpy_mix
use get_hover_throttle_as_high_end_pct
use throttle_thrust_max updated by multicopter spool logic
do not set limits in stability patch
2016-04-01 11:59:30 +09:00
Leonard Hall 5841310ac7 AP_MotorsMulticopter: update_throttle_filter limits throttle to 0 to 1 2016-04-01 11:59:30 +09:00
Leonard Hall 420b90953c AP_MotorsMulticopter: throttle_radio_min, max to multicopter class
Moved in from Motors class, only ever used by multicopters
No functional change
2016-04-01 11:59:30 +09:00
Leonard Hall 2c9a02066d AP_MotorsMulticopter: remove unused functions and variables 2016-04-01 11:59:30 +09:00
Leonard Hall 290e657f61 AP_MotorsMulticopter: update_battery_resistance captures resting voltage while disarmed
Previously it could also capture this when the input throttle was zero
2016-04-01 11:59:30 +09:00
Leonard Hall bc42cb2a66 AP_MotorsMulticopter: update_battery_resistance uses get_throttle accessor 2016-04-01 11:59:30 +09:00
Leonard Hall 8228d9e72c AP_MotorsMulticopter: current_limit_max_throttle uses get_throttle accessor 2016-04-01 11:59:30 +09:00
Leonard Hall 3cbc15bb5b AP_MotorsMulticopter: add get_throttle_thrust_max accessor 2016-04-01 11:59:30 +09:00
Leonard Hall d7dc37bda0 AP_MotorsMulticopter: remove apply_thrust_curve_and_volt_scaling_pwm 2016-04-01 11:59:30 +09:00
Leonard Hall 06f25b669d AP_MotorsMulticopter: add roll, pitch, throttle and yaw pass through 2016-04-01 11:59:30 +09:00
Leonard Hall d7c27c949c AP_MotorsMulticopter: add spool_up_complete accessor function 2016-04-01 11:59:30 +09:00
Leonard Hall 983d2dc97a AP_MotorsMulticopter: update_throttle_filter does not set throttle_in
get_throttle method now used to access filtered throttle
2016-04-01 11:59:30 +09:00
Leonard Hall 3fc3858fbd AP_MotorsMulticopter: set_throttle_range calcs _min_throttle before use 2016-04-01 11:59:30 +09:00
Leonard Hall b26318c178 AP_MotorsMulticopter: output_logic implements spooling 2016-04-01 11:59:30 +09:00
Leonard Hall b7fe6aa16e AP_MotorsMulticopter: remove update_max_throttle 2016-04-01 11:59:30 +09:00
Leonard Hall be64c71065 AP_MotorsMulticopter: add get_current_limit_max_throttle
returns the current limited maximum throttle as a number between 0 ~ 1 in the range throttle_min to throttle_max
2016-04-01 11:59:30 +09:00
Leonard Hall 64ba45a683 AP_MotorsMulticopter: add spin_when_armed_low_end_pct
returns the spin-when-armed value as a number from 0 to 1 in the range 0 to throttle_min
2016-04-01 11:59:30 +09:00
Leonard Hall 49819d822f AP_MotorsMulticopter: add get_hover_throttle_as_high_end_pct
Returns hover throttle as a number from 0 to 1 in the range from throttle_min to throttle_max
2016-04-01 11:59:30 +09:00
Leonard Hall e625c105a4 AP_MotorsMulticopter: remove get_throttle_warn 2016-04-01 11:59:30 +09:00
Leonard Hall 3854f2eda7 AP_MotorsMulticopter: rename _throttle_thr_mix_desired to _throttle_rpy_mix_desired
No functional change
Also rename _throttle_thr_mix to _throttle_rpy_mix
2016-04-01 11:59:30 +09:00
Leonard Hall 65bbc23a08 AP_MotorsMulticopter: apply_thrust_curve_and_volt_scaling in 0 to 1 range
existing equivalent pwm function becomes apply_thrust_curve_and_volt_scaling_pwm
2016-04-01 11:59:30 +09:00
Leonard Hall cb39f8aab7 AP_MotorsMuticopter: calc_thrust_to_pwm converts thrust in 0 to 1 range to pwm
pwm output is always between throttle min and throttle max
2016-04-01 11:59:30 +09:00
Leonard Hall 80ddce103f AP_Motors: move set_throttle_filter_cutoff declaration
No functional change
2016-04-01 11:59:30 +09:00
Leonard Hall 649a8c461d AP_Motors: remove unused throttle_radio_min, max
Moved to AP_MotorsMulticopter
2016-04-01 11:59:30 +09:00
Leonard Hall e84011603c AP_Motors: remove unused throttle_pwm_scalar, rpy_pwm_scalar 2016-04-01 11:59:30 +09:00
Leonard Hall 8e1351e474 AP_Motors: init member to resolve compiler warning 2016-04-01 11:59:30 +09:00
Leonard Hall ed51c7a28d AP_Motors: replace throttle_control_input with throttle_in
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
2016-04-01 11:59:30 +09:00
Leonard Hall c96b91efb6 AP_Motors: add output_to_motors 2016-04-01 11:59:30 +09:00
Leonard Hall ac579685df AP_Motors: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Leonard Hall 666a92ae2f AP_Motors: set_throttle accepts 0 to 1 range 2016-04-01 11:59:30 +09:00
Leonard Hall 3c74b4cc69 Motors: add get_roll_thrust which returns roll input in range 0 to 1
Also added get_pitch_thrust, get_yaw_thrust
2016-04-01 11:59:30 +09:00
Peter Barker a66da7be00 AP_Motors: correct parameter documenation 2016-03-17 16:10:10 +11:00
Lucas De Marchi 7d9153feb8 AP_Motors: replace header guard with pragma once 2016-03-16 18:40:42 +11:00
dgrat 5148e41c1a AP_Math: Cleaned macro definitions
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
2016-02-27 02:51:33 -03:00
Jonathan Challinger 9a09a86bb8 AP_Motors: add AP_MOTORS_DENSITY_COMP_DISABLED option 2016-01-27 09:18:09 +09:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_
It helps to distinguish between things from waf and things from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa 3d22490397 waf: examples: use methods from bld instead of ardupilotwaf 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa d281067bcc waf: make example binaries be placed in 'examples' dir
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
2016-01-15 16:46:41 -02:00
Andrew Tridgell b187a0c6eb AP_Motors: added quadplane frame type
this puts the motors on outputs 5 to 8, to leave the first 4 for the
plane
2016-01-09 07:38:51 +11:00
Randy Mackay b742ee9cfb AP_Motors: fix example sketch 2016-01-08 18:36:47 +09:00
Randy Mackay 6c458b07cb MotorsHeli_RSC: resolve compiler warning re init order 2016-01-07 12:31:49 +09:00
Andrew Tridgell 7c9ee9363b AP_Motors: added rc_map_mask() function 2016-01-06 22:09:40 +11:00
Andrew Tridgell dfccf8f713 AP_Motors: also wrap set_freq and enable_ch for motor mapping 2016-01-06 22:09:40 +11:00
Andrew Tridgell 77af00c5e1 AP_Motors: allow arbitrary mapping of channels on multirotors
using RCn_FUNCTION with motor1, motor2 etc
2016-01-06 22:09:40 +11:00
Andrew Tridgell 1b682e3c8f AP_Motors: swash servos are output only 2016-01-05 06:41:51 +11:00
Andrew Tridgell d31ba2b380 AP_Motors: added rc_write function
this is intended to make remapping motors and rescaling output easier
2016-01-04 16:56:54 +11:00
Andrew Tridgell 79c90d37f6 AP_Motors: apply HELI_RSC output type if available 2016-01-04 16:14:09 +11:00
Andrew Tridgell e1f4814068 AP_Motors: only set output side of range for RSC 2016-01-04 11:23:38 +09:00
Jonathan Challinger b803907163 AP_Motors: fix example build 2015-12-29 10:46:35 -08:00
Lucas De Marchi 8d252955f5 AP_Motors: don't link unused AP_Curve library 2015-12-28 10:23:23 -02:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem
AP_Progmem is not used anymore.
2015-12-27 15:58:12 -02:00
Don Gagne ed7cd8d3f4 AP_Motors: fix invalid Range meta data 2015-12-27 16:10:44 +11:00
Robert Lefebvre 3a13db9333 AP_MotorsHeli: Add more parameter checks. 2015-12-07 14:51:42 +09:00
Lucas De Marchi c9d1456a66 AP_Motors: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:43 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
2015-12-01 16:28:09 -02:00
Andrew Tridgell 47b9f6598a AP_Motors: allow change to heli rotor speed controls while armed
this helps a lot with tuning for gas helis
2015-11-27 15:12:03 +09:00
Caio Marcelo de Oliveira Filho 513f4fe986 AP_Motors: example uses millis/micros/panic functions 2015-11-20 12:32:16 +09:00
Andrew Tridgell 8f4ce7f20b build: removed all nocore.inoflag files
these were APM2 specific
2015-11-16 08:05:17 +11:00
Robert Lefebvre b89b0d7f9e AP_MotorsHeli_Single: Move Servo_Test static variables to be class members 2015-11-12 19:37:37 +09:00
Robert Lefebvre bb7f8c1999 AP_MotorsHeli: Create Servo Test functionality 2015-11-12 19:37:34 +09:00
Robert Lefebvre eeb544d098 AP_MotorsHeli: Create SV_MAN=5=Oscillate servo setup mode. 2015-11-12 19:37:33 +09:00
Robert Lefebvre 4443ca9602 AP_MotorsHeli: Yaw servo to move when using SV_MAN param for setup. 2015-11-12 19:37:32 +09:00
Robert Lefebvre c2dff8749e AP_MotorsHeli: Change SV_MAN=2=Center to output _col_mid_pwm instead of 0 collective 2015-11-12 19:37:31 +09:00
Fredrik Hedberg 212eb85ff2 AP_MotorsHeli: Add min and max collective to manual servo modes 2015-11-12 19:37:30 +09:00
Robert Lefebvre 22729e6927 AP_MotorsHeli: Change servo manual #defines into enum 2015-11-12 19:37:29 +09:00
Robert Lefebvre 750728fa1e AP_MotorsHeli_Single: Add motor enable aux output functionality 2015-11-12 19:37:28 +09:00
Fredrik Hedberg 5fd7fe3e53 AP_Motors: Add manual servo override to center swash-plate for set-up in AP_MotorsHeli. 2015-11-12 19:37:25 +09:00
Jolyon Saunders ca28a49fa6 AP_Motors: Circular swash-plate limits for AP_MotorsHeli 2015-11-12 19:37:24 +09:00
Lucas De Marchi ca4ae1c9e0 AP_Motors: remove check for AVR CPUs
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
2015-11-04 12:14:14 +11:00
Lucas De Marchi 5244559010 Minimize AP_Progmem.h includes
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.

In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
2015-10-30 14:35:32 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf()
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Randy Mackay ca942f39dd AP_Motors_Heli: remove unused allow_arming check 2015-10-27 09:14:40 +09:00
Caio Marcelo de Oliveira Filho 417651b1dc AP_Motors: remove unnecessary board includes from examples 2015-10-21 09:16:12 +11:00
Caio Marcelo de Oliveira Filho ec52df991c build: compile only the HAL files needed by the board
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho 2e464a53c2 AP_HAL: make code not depend on concrete HAL implementations
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.

A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.

The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.

Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.

The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
2015-10-21 09:16:07 +11:00
Lucas De Marchi f43f6c53f7 AP_Motors: Group writes to motors
Surround calls to rcout->write() with rcout->cork() and rcout->push().
If the RCOutput implementation allows the writes are grouped and only
sent together to the underlying hardware.
2015-10-06 10:42:18 +11:00
Lucas De Marchi e938075581 AP_MotorsCoax: get rid of _motor_to_channel_map 2015-09-29 12:01:41 +09:00
Lucas De Marchi ec4ebfde83 AP_MotorsSingle: get rid of _motor_to_channel_map 2015-09-29 12:01:28 +09:00
Lucas De Marchi 537599c01b AP_MotorsTri: get rid of _motor_to_channel_map 2015-09-29 12:01:14 +09:00
Lucas De Marchi 1572c9d4f4 AP_MotorsMatrix: get rid of _motor_to_channel_map 2015-09-29 12:00:56 +09:00
Lucas De Marchi 43268b9822 AP_MotorsHeli: get rid of _motor_to_channel_map 2015-09-29 12:00:18 +09:00
Lucas De Marchi 7ea141b774 AP_Motors_Multi: get rid of _motor_to_channel_map 2015-09-29 11:59:48 +09:00
Lucas De Marchi d97d97dc54 AP_Motors: get rid of _motor_to_channel_map
This was only used for supporting APM1. The removal was mostly automatic
with:

    sed -i 's/pgm_read_byte(&_motor_to_channel_map\[\([^]]*\)\])/\1/g' libraries/AP_Motors/*.cpp
    sed -i 's/_motor_to_channel_map\[\([^]]*\)\]/\1/g' libraries/AP_Motors/*.cpp

And then remove references to MOTOR_TO_CHANNEL_MAP and
_motor_to_channel_map and make sure the variable used in shifts is
unsigned
2015-09-29 11:59:25 +09:00
Andrew Tridgell f22a1d3e6d AP_Motors: display message in heli parameter_check() 2015-09-25 12:30:34 +10:00
Andrew Tridgell 9da2b2b430 AP_Motors: added H_GYR_GAIN_ACRO 2015-09-25 12:30:33 +10:00
Randy Mackay 1024790633 MotorsMulti: add throttle_max accessor 2015-09-07 15:10:02 +09:00
Randy Mackay e3ff4ed9c4 MotorsHeli: integrate RotorControlState 2015-08-31 11:43:59 +09:00
Randy Mackay cb47311416 MotorsHeli_RSC: add RotorControlMode enum 2015-08-31 11:43:58 +09:00
Randy Mackay 72efc85ee8 MotorsHeli_RSC: RotorControlState enum 2015-08-31 11:43:57 +09:00
Robert Lefebvre bde43412d8 AP_MotorsHeli: Fix RSC Mode 3 2015-08-31 11:43:55 +09:00
Robert Lefebvre 38ccd6e04f AP_MotorsHeli_RSC: Fix tail_type control 2015-08-31 11:43:54 +09:00
Robert Lefebvre 535da1d79a AP_MotorsHeli_Single: DDVPT to use it's own ramp and runup times 2015-08-31 11:43:51 +09:00
Robert Lefebvre 28318c4116 AP_MotorsHeli: Move Output functions into parent class 2015-08-31 11:43:50 +09:00
Robert Lefebvre 84102c3e3f AP_MotorsHeli: Rework how servo setup is done. 2015-08-31 11:43:49 +09:00
Robert Lefebvre 345663f705 AP_MotorsHeli: Simplify servo init/reset 2015-08-31 11:43:48 +09:00
Robert Lefebvre b11600aebe AP_MotorsHeli: Move set_delta_phase_angle into _Single class 2015-08-31 11:43:47 +09:00
Robert Lefebvre 3756c6b3f3 AP_MotorsHeli: Create RSC Throttle Curve mode for controlling gas engines. 2015-08-31 11:43:45 +09:00
Robert Lefebvre f853979816 AP_MotorsHeli: run RSC Control function in Output Min function
Move Output_Min() function into Heli_Single class as it will eventually be overloaded by other helicopter class types.
2015-08-31 11:43:44 +09:00
Robert Lefebvre 315f0408ae AP_MotorsHeli: RSC controller to use speed ramp as simple float scalar 2015-08-31 11:27:52 +09:00