Commit Graph

827 Commits

Author SHA1 Message Date
Jacob Walser 0223cf70ed Sub: better check and text message for baro calibration failure 2018-04-23 15:12:35 -04:00
Jacob Walser 7caca6a251 Sub: reduce default ACRO_YAW_P by 25% to 3.375 2018-04-23 15:12:35 -04:00
Jacob Walser 4fae5cdfcf Sub: disarm motors if failsafe action fails 2018-04-23 15:12:35 -04:00
Jacob Walser 4fe8746a2a Sub: remove arbitrary scalars from manual mode inputs
fix bluerobotics/ardusub#150
2018-04-23 15:12:35 -04:00
Jacob Walser c76ff32aa1 Sub: Do not report altitude in GLOBAL_POSITION_INT if there is no depth
sensor connected

Fix bluerobotics/ardusub#145
2018-04-19 14:58:06 -04:00
Patrick José Pereira 0878f5044c Sub: Send a clear message if depth sensor is not connected
Fix bluerobotics/ardusub#151

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-04-19 07:45:00 -07:00
Peter Barker c7327acef7 Sub: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker a10c843e6e Sub: GPS now logs its own data 2018-04-18 13:50:55 +09:00
Peter Barker fdd410f105 Sub: Baro does its own dataflash logging 2018-04-12 19:12:12 +01:00
Michael du Breuil 9f673c2746 Sub: Use RC_Channels instead of hal.rcin 2018-04-11 21:47:07 +01:00
Jacob Walser de0d158f37 Sub: apply yaw input scaling in manual mode
Close bluerobotics/ardusub#68
2018-04-11 14:06:32 -04:00
Michael du Breuil e840006ff9 Sub: Check MANUAL_CONTROL target 2018-04-10 16:54:34 +01:00
Randy Mackay defdeaed95 Sub: integrate AC_Loiter 2018-04-04 10:45:10 +09:00
Randy Mackay 6728659b4a Sub: add AC_Loiter to make build 2018-04-04 10:45:10 +09:00
Francisco Ferreira ba44d11988
Sub: fix method shadowing 2018-04-03 16:29:34 +01:00
Peter Barker fa3b3964e8 Sub: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Peter Barker 05ee33d037 Sub: tidy handling of barometer calibrations 2018-04-02 23:25:05 +01:00
Peter Barker 5536a321ed Sub: move common calibration functions up 2018-04-02 23:25:05 +01:00
Peter Barker fe293abf37 Sub: factor out preflight calibration function 2018-04-02 23:25:05 +01:00
Michael du Breuil 6ebe954d51 Sub: Support new battery failsafes 2018-03-27 22:12:21 +01:00
Peter Barker 4b12fab5f5 Sub: allow DataFlash to handle log sending 2018-03-26 09:22:47 +09:00
Peter Barker c9664a9923 Sub: move handling of get_home_position up 2018-03-19 10:32:37 +09:00
Peter Barker 3af4806d38 Sub: move home state into AP_AHRS 2018-03-19 10:32:37 +09:00
Peter Barker 78ca188dc3 Sub: use ins singleton 2018-03-16 00:37:35 -07:00
Randy Mackay d43341c532 Sub: run guided velocity control at main loop rate 2018-03-16 13:50:57 +09:00
Randy Mackay c857f8332b Sub: replace NTUN with PSC logging 2018-03-16 13:50:57 +09:00
Randy Mackay 01d1d41302 Sub: integrate attitude control inertial_frame_reset 2018-03-16 13:50:57 +09:00
Randy Mackay 2154d08185 Sub: remove setting of pos-con jerk 2018-03-16 13:50:57 +09:00
Randy Mackay 2697e19513 Sub: guided removes xy mode from calls to pos-con
Also always limit angle to maintain altitude
2018-03-16 13:50:57 +09:00
Randy Mackay da17034a3d Sub: replace smoothing gain with AC_AttitudeControl::set_input_tc 2018-03-16 13:50:57 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas f63388cb07 Sub: Obey RANGEFINDER_ENABLED and AC_TERRAIN build macros 2018-03-15 15:03:22 +00:00
Ebin 5dde62cce9 Sub: Changed log message IDs to enum
Changes log message IDs to enum and removes values for the params in LoggingParameters enum
2018-03-14 09:33:39 +09:00
Peter Barker 06f6135daa Sub: use baro singleton 2018-03-08 21:20:05 -08:00
Peter Barker 5e1e3dc822 Sub: delete correct assignment operator 2018-03-08 21:20:05 -08:00
Peter Barker 15f212adc0 Sub: use AP::ahrs() for GCS_MAVLink 2018-03-07 12:34:39 +00:00
Jacob Walser c1c471dbaa Sub: Fix comment
Fix #7856
2018-03-06 13:57:34 -05:00
murata 5da13774d5 Sub: Adjust to the defined value. 2018-03-02 09:27:43 +09:00
Patrick José Pereira aafede65f7 Sub: Add camera pan functionality
Fix bluerobotics/ardusub#134

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-02-21 10:52:24 -08:00
Patrick José Pereira 1196019b53 Sub: Correct joystick transform_manual_control_to_rc_override
Correct override channel number

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-02-21 09:03:42 -08:00
Jacob Walser 8f227201e0 Sub: move reset params to default handling to GCS base class 2018-02-20 10:49:09 +11:00
dheideman 47d5de353d Sub: Set neutral controls when switching to manual/acro mode 2018-02-13 11:41:37 -05:00
Jacob Walser 08298fced6 Sub: clear roll/pitch trim when setting neutral controls 2018-02-13 11:41:37 -05:00
dheideman b94ed3aecd Sub: Adjust roll/pitch joystick button logic 2018-02-13 11:41:36 -05:00
Andrew Tridgell 59868f425e Sub: use scheduler.get_last_loop_time_s() 2018-02-13 17:15:05 +11:00
Peter Barker 44a1553535 Sub: eliminate perf_update scheduler table shim 2018-02-13 17:15:05 +11:00
Andrew Tridgell 832a96d29f Sub: use filtered loop time 2018-02-13 17:15:05 +11:00
Peter Barker ae958632ec Sub: pass log-performance-bit at init time rather than update time 2018-02-13 17:15:05 +11:00
Peter Barker 980fbf6cfb Sub: move logging of PM messages to AP_Scheduler 2018-02-13 17:15:05 +11:00
Peter Barker 3e6ba8d96e Sub: move PERF: statustext sending into AP_Scheduler 2018-02-13 17:15:05 +11:00
Peter Barker 7313d9e7a7 Sub: use AP_Scheduler's loop() function 2018-02-13 17:15:05 +11:00
Peter Barker 9bb1224cef Sub: use scheduler ticks in place of mainloop_count 2018-02-13 17:15:05 +11:00
Peter Barker 044bc9adf0 Sub: tell PerfInfo the configured loop rate 2018-02-13 17:15:05 +11:00
Randy Mackay 81d3a3106e Sub: global-pos-int uses system time
Also takes vel directly from EKF instead of inertial nav shim
2018-02-13 08:52:48 +09:00
Peter Barker ecb805768b Sub: remove shims used in scheduler table 2018-02-12 10:37:21 -08:00
Andrew Tridgell 58dfca8ccd Sub: pass loop rate to perf_info 2018-02-08 17:36:33 +11:00
Michael du Breuil 02a660e0ce Sub: Move battery logging to AP_BattMonitor 2018-02-06 00:11:32 +00:00
Randy Mackay 8d344ef7b4 Sub: removed defaults for PIDs moved to AC_PosControl 2018-01-31 08:48:21 +09:00
Randy Mackay 6a701b2412 Sub: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay cef50d8a30 Sub: velocity pi moved to position control library 2018-01-23 12:00:43 +09:00
Michael du Breuil 2b81058ca1 Sub: Support AP_BattMonitor_Params 2018-01-17 22:21:55 +00:00
Andrew Tridgell c1504dadab Sub: use AP_FEATURE_BOARD_DETECT 2018-01-15 11:46:02 +11:00
ChrisBird 0fb679b2b2 Sub: Separate max ascent and descent speeds
This is to match a change made to Copter.

It might be relevant to sub in that users may wish to have asymmetrical descent and ascent rates.

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Modes impacted:
ALT_HOLD
CIRCLE
POSHOLD

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.

The above behavior is less of a concern for Sub but to keep it consistent its been implemented it the same way.
2017-12-28 15:16:08 -05:00
dheideman 8b0b96d56e Sub: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman 8fec2cbea3 Sub: Add momentary servo button function 2017-12-28 14:14:47 -05:00
Daniel Heideman 963d6a7739 Sub: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Peter Barker ed82421f27 Sub: remove argument to check()
Also, fence_check was renamed to check()
2017-12-28 15:38:37 +00:00
Peter Barker b25a81e09d Sub: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 268b8799d0 Sub: stop setting home distance in fence 2017-12-15 01:42:49 +00:00
Andrew Tridgell 4c9f48244e Sub: removed create() method for objects
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Peter Barker 4c2a750f06 Sub: fence no longer requires AP_InertialNav 2017-12-13 10:04:50 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 63639a0838 Sub: Guided_PosVel mode: reject destination if outside the fence
Also: log guided destination and velocity and rename a variable to pos_neu_cm to better reflect the meaning
2017-12-05 08:57:55 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 9f6342a1d1 Sub: Move some common functions to AP_Math (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 0404d3588d Sub: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Peter Barker 9040bb5f97 Sub: tighten type of result variable in handleMessage 2017-12-01 17:01:10 +00:00
Patrick José Pereira b724884344 Sub: Remove unnecessary cast in init_rc_out
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-11-27 15:14:34 -08:00
Peter Barker 7aaf25afd3 ArduSub: support for units on fields 2017-11-23 10:40:30 +11:00
Randy Mackay f01b483657 Sub: move barometer_accumulate to sensors.cpp
non-functional change
2017-11-22 17:13:14 +09:00
Andrew Tridgell b16ae19bce Sub: use cork/push wrapper 2017-11-21 14:10:54 +11:00
Peter Barker fc3721c123 Sub: add average and stddev time to SCHED_DEBUG output 2017-11-16 15:31:53 +00:00
Peter Barker 901dc46708 Sub: use AP::PerfInfo library 2017-11-16 15:31:53 +00:00
Peter Barker 6d2b0ecc82 Sub: AP_Camera uses GPS singleton 2017-11-16 15:28:37 +00:00
Peter Barker 2fc9b3b5f4 Sub: use gps singleton for GCS functions 2017-11-15 13:43:03 +00:00
Jacob Walser f28c58ce3b Sub: Update release notes for 3.5.2 2017-11-14 09:08:42 -05:00
André Kjellstrup 00484073b9 Sub: Option to trig by distance only when in AUTO mode 2017-11-14 00:10:22 +00:00
Peter Barker c436235b05 Sub: remove defaulting of report value in rc_calibration_checks 2017-11-08 19:08:21 +09:00
Peter Barker 450c8f4f3a Sub: remove redundant call to ins_checks
pre_arm_checks in AP_Arming already makes this call
2017-11-08 19:08:19 +09:00
Peter Barker 7961a8f5c8 Sub: rc calibration checks are called by AP_Arming 2017-11-08 19:08:01 +09:00
dheideman 99f63d63e8 Sub: Add joystick button functions for relays 3 & 4 2017-10-27 12:14:41 -04:00
Peter Barker 6d32fb7f2a Sub: call ins's periodic function 2017-10-27 16:33:45 +11:00
Jacob Walser eabc608b2e Sub: cleanup unused variable 2017-10-26 23:59:34 -04:00
Jacob Walser 1998cf93d2 Sub: JS_LIGHTS_STEP -> JS_LIGHTS_STEPS 2017-10-26 15:45:57 -04:00
Jacob Walser b7e367e21d Sub: always neutralize inputs during pilot input failsafe 2017-10-26 14:47:16 -04:00
Jacob Walser fb2e87032d Sub: use configured rc input range for lights input instead of hard coded values 2017-10-26 14:24:15 -04:00
dheideman 4e1c7fff37 Sub: Ignore input hold button if disarmed 2017-10-26 10:52:53 -04:00
dheideman 69be1725b6 Sub: Disable input hold on disarm 2017-10-26 10:52:53 -04:00
Jacob Walser 15658f1526 Sub: rework camera tilt input and slew limiting 2017-10-26 10:44:23 -04:00
Jacob Walser e8326ef120 Sub: remove manual control button debounce timer
This was a really long time for a debounce, and
this code belongs to the program actually polling for input.
2017-10-26 10:44:23 -04:00
Jacob Walser bc0827ffd7 Sub: force GND_EXT_BUS at boot for Pixhawk 1 and 2 2017-10-25 21:07:09 +11:00
Andrew Tridgell aeb2a628c4 Sub: fix for AP_Motors API change 2017-10-22 15:52:50 +11:00
dheideman 4ed02c3c94 Sub: Change input hold announcements for enable/disable 2017-10-20 16:15:47 -04:00
Jacob Walser b4ab0e2c6d Sub: Increase threshold for input hold engaged flag
Also clear input hold offsets when they are below this threshold
2017-10-20 16:03:49 -04:00
Jacob Walser 7bed518181 Sub: Don't emit tether turn status via STATUSTEXT
We have NAMED_VALUE_FLOAT do that now
2017-10-20 14:40:16 -04:00
Patrick José Pereira 1598a97734 Sub: Solve some typos
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-10-19 06:27:32 -07:00
Jacob Walser 2959c270a6 Sub: bugfix/typo COMPASS_OFFS_MAX default override 2017-10-11 12:51:55 -04:00
Jacob Walser 83dacdba73 Sub: Fix AP_Notify leak flag logic 2017-10-11 12:20:47 -04:00
Andrew Tridgell cf7b874b42 Sub: support simple accelcal 2017-10-10 10:57:38 +11:00
Michael du Breuil 4d1e61633b Sub: Check GPS health 2017-09-27 19:29:32 +01:00
Lucas De Marchi beabae6a98 global: use static method to construct AP_AHRS_NavEKF 2017-09-26 03:01:21 +01:00
Lucas De Marchi c9fbf7b722 global: use static method to construct AP_NavEKF3 2017-09-26 03:01:21 +01:00
Lucas De Marchi e2fe36357a global: use static method to construct AP_NavEKF2 2017-09-26 03:01:21 +01:00
Lucas De Marchi cf6ea9642e global: use static method to construct AP_Terrain 2017-09-26 03:01:21 +01:00
Lucas De Marchi 4f42facefc global: use static method to construct AC_Avoid 2017-09-26 03:01:21 +01:00
Lucas De Marchi b05610870c global: use static method to construct AP_Rally 2017-09-26 03:01:21 +01:00
Lucas De Marchi c6eb48009b global: use static method to construct AC_Fence 2017-09-26 03:01:21 +01:00
Lucas De Marchi 18aa88b329 global: use static method to construct AP_Mount 2017-09-26 03:01:21 +01:00
Lucas De Marchi c3647f0185 global: use static method to construct AP_Camera 2017-09-26 03:01:21 +01:00
Lucas De Marchi cc53e7bc4b global: use static method to construct AP_ServoRelayEvents 2017-09-26 03:01:21 +01:00
Lucas De Marchi 13d7f58036 global: use static method to construct AP_Relay 2017-09-26 03:01:21 +01:00
Lucas De Marchi b022c02029 global: use static method to construct AP_BattMonitor 2017-09-26 03:01:21 +01:00
Lucas De Marchi 69b6d95cb2 global: use static method to construct AP_Board_Config{,_CAN} 2017-09-26 03:01:21 +01:00
Lucas De Marchi a74e700006 global: use static method to construct RCMapper 2017-09-26 03:01:21 +01:00
Lucas De Marchi 72fd2d6f05 global: use static method to construct AP_SerialManager 2017-09-26 03:01:21 +01:00
Lucas De Marchi fbe0d9761c global: use static method to construct AP_OpticalFlow 2017-09-26 03:01:21 +01:00
Lucas De Marchi eed3c83079 ArduSub: use static method to construct AP_Arming_Sub
This also fix a bug of calling AP_Param::setup_object_defaults() on the
parent.
2017-09-26 03:01:21 +01:00
Lucas De Marchi b36a5919f5 global: use static method to construct AP_Mission
This also move the initialization to be in the header for those that
weren't already to maintain consistency.
2017-09-26 03:01:21 +01:00
Lucas De Marchi de5e044b02 global: use static method to construct AP_RPM 2017-09-26 03:01:21 +01:00
Lucas De Marchi 40fd1b346c global: remove rangefinder from AP_AHRS_NavEKF
AP_AHRS_NavEKF doesn't use the rangefinder, it just delegates the
calls to the right estimator.

For libraries/AP_AHRS/examples/AHRS_Test/AHRS_Test.cpp the initialization
order has also been modified to match the order on vehicles. It's more
correct since it passes a reference when EKF2/EKF3 are already
constructed, while thos constructors use a pointer.  Ideally these
should be moved to an init() method though, or use a get_instance().
2017-09-26 03:01:21 +01:00
Lucas De Marchi 9027a55696 global: use static method to construct RangeFinder 2017-09-26 03:01:21 +01:00
Lucas De Marchi f5c2ffffb9 global: remove DataFlash from AP_Mount::init() 2017-09-26 03:01:21 +01:00
Lucas De Marchi 53c82b4aaf global: use static method to construct DataFlash_Class 2017-09-26 03:01:21 +01:00
Lucas De Marchi faf2c8fb36 ArduSub: use static method to construct AP_LeakDetector 2017-09-26 03:01:21 +01:00
Lucas De Marchi 62ac0ab8aa global: use static method to construct AP_Notify 2017-09-26 03:01:21 +01:00
Lucas De Marchi de680dac5b global: use static method to construct AP_Scheduler 2017-09-26 03:01:21 +01:00
Lucas De Marchi 8094482f21 global: use static method to construct AP_GPS 2017-09-26 03:01:21 +01:00
Lucas De Marchi 87b30b4552 global: use static method to construct AP_InertialSensor 2017-09-26 03:01:21 +01:00
Lucas De Marchi c1a957fbf3 global: use static method to construct Compass 2017-09-26 03:01:21 +01:00
Lucas De Marchi 91feec0e14 global: use static method to construct AP_Baro 2017-09-26 03:01:21 +01:00
Lucas De Marchi 5400611f49 ArduSub: protect version.h from inclusion and use ap_version.h 2017-09-23 21:37:45 -07:00
Lucas De Marchi 11e47fb145 ArduSub: do not include version.h/ap_version.h
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Lucas De Marchi 7eba6572ea ArduSub: move version to a static member
We should never include version.h or ap_version.h headers directly
on a header since this will trigger a complete rebuild of the
codebase when we commit to the repository. The ap_version.h header
is auto-generated containing information from the current commit.

If we include it in a header, every other file that ends up including
that header (directly or indirectly) will need to be rebuilt. No
ccache's cache beats having to do nothing when the header is just
not included.

version.h contains information that is kept on a struct inside
each vehicle. Rather than using the macros from each vehicle,
the getter should be preferred, which returns an AP_FWVersion
referente.
2017-09-23 21:37:45 -07:00
Randy Mackay 6a1e14fccd Sub: command-long DO_SET_HOME check first param is zero 2017-09-20 12:14:38 +09:00
Randy Mackay 2dae917c86 Sub: accept DO_SET_HOME within COMMAND_INT 2017-09-20 12:14:38 +09:00
Randy Mackay 305659c5c3 Sub: accept more mav-frame types
accept mav frames whether or not they have _INT appended
2017-09-20 12:14:38 +09:00
Peter Barker 5b7f396e23 Sub: move handling of SET_GPS_GLOBAL_ORIGIN up 2017-09-19 15:44:23 +09:00
Randy Mackay a477ef7cd6 Sub: support SET_GPS_GLOBAL_ORIGIN message 2017-09-19 10:30:15 +09:00
Peter Barker 89e3f1dbd8 Sub: move gcs_out_of_time into GCS object 2017-09-12 18:28:07 +01:00
Jacob Walser ed5d891730 Sub: update release notes for 3.5.1 2017-09-12 12:31:57 -04:00
Peter Barker 1928dcb784 Sub: move handling of do_send_banner up 2017-08-30 15:54:47 +01:00
Peter Barker 3df3b25c1f Sub: handle param_request_list in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker 8216a0375d Sub: handle param_set in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker 52463a5ed6 Sub: move send_autopilot_request calls up to GCS base class 2017-08-30 15:54:46 +01:00
Peter Barker ae9891d291 Sub: add constant structure holding firmware version 2017-08-30 15:54:46 +01:00
Jacob Walser b1b471f2bd Sub: Update release notes for Sub-3.5.1beta1 2017-08-29 10:01:19 -04:00
Jacob Walser a2002180ee Sub: Set default external baro bus correctly for Pixhawk 2 2017-08-29 08:10:05 -04:00
Jacob Walser a93ecb8b5a Sub: Fix Notify led to reflect when leak failsafe has been resolved. 2017-08-29 08:10:05 -04:00
Jacob Walser a8aa005e18 Sub: Bugfix forward channel not neutralized appropriately 2017-08-29 08:10:05 -04:00
Jacob Walser 4ee6d8e980 Sub: Remove pressure constraint on preflight baro calibration 2017-08-29 08:10:05 -04:00
Jacob Walser 7137d13817 Sub: Remove unnecessary checks from default pre-arm checks 2017-08-29 08:10:05 -04:00
Jacob Walser 9733350f5d Sub: Remove enumerations from SYSID_MYGCS parameter 2017-08-29 08:10:05 -04:00
Jacob Walser 19a5b38ff5 Sub: Default FS_PILOT_TIMEOUT to 3 seconds 2017-08-29 08:10:05 -04:00
Jacob Walser 3f51dd387c Sub: Add @Units metadata to SURFACE_DEPTH parameter 2017-08-29 08:10:05 -04:00
Jacob Walser d1ad33ca54 Sub: Default INS_GYR_CAL to Never (0) 2017-08-29 08:10:05 -04:00
Jacob Walser 81065c567a Sub: Default WP_YAW_BEHAVIOR to WP_YAW_BEHAVIOR_CORRECT_XTRACK 2017-08-29 08:10:05 -04:00
Jacob Walser 1bea1d042b Sub: Add missing WP_YAW_BEHAVIOR option to metadata 2017-08-29 08:10:05 -04:00
Jacob Walser 4449a46f5b Sub: input_hold_toggle -> input_hold_set 2017-08-29 08:10:05 -04:00
Jacob Walser d25be07c8b Sub: Default COMPASS_OFS_MAX from 600 to 1000 2017-08-29 08:10:05 -04:00
Peter Barker b1516cc6e8 Sub: base loop time remaining on variable loop rate 2017-08-26 09:33:45 +09:00
Jacob Walser 0bd5d6ca18 Sub: send useful information to GCS 2017-08-23 13:40:52 +01:00
Randy Mackay 3281f348b1 Sub: remove enabled check from optflow init 2017-08-23 11:19:14 +09:00
Randy Mackay 0a060a0e08 Sub: integrate simpler Log_Write_EKF 2017-08-23 11:19:14 +09:00
Peter Barker 8c8fe4b1bb Sub: move serial_control case to base class 2017-08-17 12:42:31 +01:00
Peter Barker c7c9cb9b0f Sub: move play_tune and led_control handling to base class 2017-08-17 12:27:10 +01:00
Jacob Walser 589416451f Sub: Don't check min/max configured for RC prearm check 2017-08-16 11:37:46 -04:00
Peter Barker 5a9af5bc28 Sub: use GCS_MAVLINK subclasses to handle set_mode 2017-08-16 13:11:07 +01:00
Michael du Breuil 6e55c9554a Sub: Support common version of MAV_CMD_DO_FLIGHT_TERMINATION 2017-08-15 15:14:56 +01:00
Peter Barker a87328816a Sub: use common RC checking code from AP_Arming 2017-08-14 15:32:25 +09:00
Peter Barker 233d49797e Sub: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker b15d72ddce Sub: send gps messages as separate queued messages 2017-08-09 16:18:22 +01:00
Peter Barker b14d99dc2c Sub: move sending of gps_raw up 2017-08-09 16:18:22 +01:00
Peter Barker 14bfccace4 Sub: move sending of system_time up 2017-08-09 16:18:22 +01:00
Peter Barker e94ae13cfd Sub: move sending of camera_feedback up 2017-08-09 16:18:22 +01:00
Peter Barker 8692bb4619 Sub: move sending of meminfo up 2017-08-09 16:18:22 +01:00
Peter Barker 7839132b1d Sub: use new retry_deferred method 2017-08-05 23:14:41 +01:00
Peter Barker e0879c6fce Sub: stop sending MSG_SERVO_OUT messages
This didn't ever result in a message being sent on Sub
2017-08-03 14:34:33 +01:00
Peter Barker 1fcab08bd0 Sub: move try_send_message queued_param_send up 2017-08-03 14:34:33 +01:00
Peter Barker 7c5ed54ffc Sub: move try_send_message send_hwstatus up 2017-08-03 14:33:37 +01:00
Peter Barker 7a72c3b1fb Sub: move try_send_message mission handling up 2017-08-03 14:24:47 +01:00
Peter Barker dce947b54f Sub: move try_send_message compass message handling up 2017-08-03 14:24:46 +01:00
Peter Barker 4865aef9e4 Sub: base SYS_STATUS load average on variable loop rate 2017-08-01 19:39:27 +01:00
Peter Barker ee6969939b Sub: fix underflow in scheduler
4eee3b1317 fixed this in Copter
2017-07-31 15:51:30 +01:00
Peter Barker 077f577e5c Sub: move common mavlink camera handling up 2017-07-28 14:32:58 +01:00
Peter Barker b299772a75 Sub: camera is responsible for taking distance-based-images and logging 2017-07-28 14:27:53 +01:00
Peter Barker d6d12a8cb1 Sub: handle GPS_INPUT in base GCS_MAVLINK class 2017-07-27 16:23:15 +01:00
Peter Barker f272c7b6bf Sub: move gps inject handling up to GCS_MAVLINK 2017-07-27 12:03:25 +01:00
Peter Barker 2aaaba8397 Sub: handle common GPS messages in base GCS_MAVLINK class 2017-07-25 14:00:45 +01:00
dheideman 199485beae Sub: Acknowledge reboot before rebooting 2017-07-22 09:54:05 +09:00
dheideman 22578bd7f0 Sub: fix absolute pressure sensor present flag 2017-07-21 14:26:38 -04:00
Peter Barker 342d95ad2f Sub: move starting of new logs into DataFlash 2017-07-19 16:37:28 +01:00
Peter Barker d2c57860fd Sub: remove MSG_STATUSTEXT entirely 2017-07-18 16:12:59 +01:00
Peter Barker 979f6a1980 Sub: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up 2017-07-17 14:17:19 +01:00