Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-07 16:38:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
15,212 Commits 71 Branches 510 Tags 770 MiB
1ec5eedd23
Commit Graph

3685 Commits

Author SHA1 Message Date
Andrew Tridgell
51dc3c120d Copter: handle GIMBAL_REPORT receive and send 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2015-02-03 09:49:15 +11:00
Randy Mackay
f00861d2f1 Copter: using arming_failed as event 2015-02-03 06:14:56 +09:00
Randy Mackay
9e813948fa Copter: protect against multiple arming messages 
Protect against the GCS sending multiple arming messages close together
which disrupts the gyro calibration
 2015-02-02 22:31:20 +09:00
Randy Mackay
32cb901ce3 Copter: allow arming at mid throttle in AltHold, Loiter 2015-02-02 22:31:18 +09:00
Randy Mackay
e7f20c04c3 Copter: init_arm_motors calls pre-arm checks 
This reduces a small amount of duplicated code in the pilot initiated
arming and GCS initiated arming functions
 2015-02-02 22:31:14 +09:00
Randy Mackay
f4c392c64d Copter: pre_arm_checks returns success or failure 
This makes the pre-arm check function consist with the other arming
check functions
 2015-02-02 22:31:11 +09:00
Randy Mackay
64af4ff923 Copter: rename set_servos_4 to motors_output 2015-02-02 22:31:08 +09:00
Randy Mackay
8754ce9eed Copter: move 80% thr limit to MotorsTri 2015-02-02 22:31:04 +09:00
Randy Mackay
43ba94e99a Copter: rename manual_flight_mode to mode_has_manual_throttle 2015-02-02 22:31:01 +09:00
Randy Mackay
3aac281c5a Copter: land detector requires desired climb rate be < -20cm/s 2015-01-31 17:23:43 +09:00
Randy Mackay
3e872c71fc Copter: AC3.2.1-rc2 release notes 2015-01-30 16:23:52 +09:00
Robert Lefebvre
8e8ec09740 Copter: update pos_control alt_max from fence at 1hz 2015-01-30 14:13:49 +09:00
Randy Mackay
e0cfe091fb Copter: setup uart after checking usb_connected 2015-01-29 14:05:15 +11:00
Randy Mackay
8ea65c2dc2 Copter: APM_Config define to disable FRSKY telem 2015-01-29 14:05:14 +11:00
Randy Mackay
f91fb9a4e8 Copter: rename frsky_telemetry_send function 2015-01-29 14:05:14 +11:00
Randy Mackay
34503de18e Copter: integrate SerialManager 
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
 2015-01-29 14:05:14 +11:00
Randy Mackay
7ffcf62e2e Copter: move MNT param's underscore to mount lib 2015-01-29 13:57:19 +11:00
Randy Mackay
c51ba8cd03 Copter: integrate mount frontend-backend restructure 
initialise mount on startup
use Mount::has_pan_control method
Remove calls to unimplemented mount.configure_cmd
Remove call to update_mount_type which will be handled from within mount
lib
 2015-01-29 13:57:18 +11:00
Randy Mackay
31b2534c1d Copter: rename mount.set_roi_cmd to set_roi_target 2015-01-29 13:57:18 +11:00
Randy Mackay
18f8ffab6f Copter: remove land detector bar climb rate definition 2015-01-28 10:59:15 +09:00
Jonathan Challinger
9d585700f8 Copter: remove baro climb rate check from land detector 2015-01-28 10:57:00 +09:00
Matthias Badaire
a2d71d2811 Copter: Frsky telemtry change move parameter to init of the class 
Parameter needs to be passed and use at the init of the class frsky telem
 2015-01-22 16:49:39 +11:00
Randy Mackay
1819bd48f4 Copter: remove home_is_set checks from Loiter, PosHold, RTL 
This allows these flight modes to potentially operate even when the
vehicle has never had a GPS lock.
Potentially we should replace this with a check that the EKF's origin
has been set
 2015-01-22 14:40:19 +09:00
Randy Mackay
d49489ca7e Copter: optflow_position_ok requires using EKF 2015-01-22 14:40:13 +09:00
Randy Mackay
01f1ce4cb3 Copter: position_ok false when EKF in const pos mode 2015-01-22 14:40:11 +09:00
Randy Mackay
74ac79ba10 Copter: Drift uses throttle_zero flag 2015-01-22 14:40:08 +09:00
Randy Mackay
02d0b05926 Copter: minor format fix 2015-01-22 14:40:05 +09:00
Randy Mackay
4185d17915 Copter: fix to RTL, PosHold and Loiter's use of filter status 2015-01-22 14:40:02 +09:00
Randy Mackay
cc52bbbffb Copter: update current loc once home is set 2015-01-22 14:39:59 +09:00
Randy Mackay
f1a6b06586 Copter: remove redundant filter status checks 2015-01-22 14:39:57 +09:00
Randy Mackay
3641d3d508 Copter: send inav velocities in global position message 
Also absolute alt now calculated from home alt + current alt above home
instead of using GPS absolute alt
 2015-01-22 14:39:54 +09:00
Randy Mackay
e464909ddf Copter: position_ok true when EKF predicts it will be ok 
This resolves the chicken and egg problem of the EKF filter status's
position flags not becoming true until after the vehicle has been armed
at least once.
 2015-01-22 14:39:52 +09:00
Randy Mackay
58ac9de94b Copter: update home position when disarmed 
This resolves the issue in which the vehicle's position jumped back to
it's home location when disarmed and using the EKF.  This also makes
copter consistent with plane.
 2015-01-22 14:39:50 +09:00
Randy Mackay
fd0b82f669 Copter: add optflow_position_ok and use for loiter 
This allows entering Loiter flight mode with only optical flow based
position
 2015-01-22 14:39:47 +09:00
Randy Mackay
199dc3454d Copter: replace GPS_ok with position_ok 
position_ok uses the EKF's filter status if the EKF is being used
otherwise it falls back to the GPS based checks used by inertial nav
 2015-01-22 14:39:45 +09:00
Randy Mackay
a4f71e5946 Copter: replace inav's position_ok with get_filter_status 2015-01-22 14:39:42 +09:00
Randy Mackay
e94693e8ac Copter: remove unused throttle integrator 2015-01-21 14:38:06 +09:00
Robert Lefebvre
b8822a42b6 Copter: Change Compass logging to new DataFlash method that handles instances. 2015-01-21 14:37:52 +09:00
Robert Lefebvre
37304fd5ed Copter: Minor formatting changes in Log.pde 2015-01-21 14:37:23 +09:00
Robert Lefebvre
4b86a4aeec Arducopter: Change mode logging to use common-vehicle DataFlash library. 2015-01-21 14:37:20 +09:00
Robert Lefebvre
422970a1b1 Arducopter: Change compass logging to use common-vehicle DataFlash library. 2015-01-21 14:37:16 +09:00
Robert Lefebvre
1b152cf2bf ArduCopter: Change Current logging to use common-vehicle logging in DataFlash library. 2015-01-21 14:37:04 +09:00
Robert Lefebvre
c9d5b6aa7f Arducopter: Change Attitude logging to use common-vehicle logging in DataFlash library. 2015-01-21 14:36:59 +09:00
Randy Mackay
0065b3b224 Copter: tighten accel and gyro pre-arm consistency check 
Accel diff threshold to 0.7m/s/s (was 1.0 m/s/s)
Gyro diff threshold to 5deg/sec (was 20deg/sec)
 2015-01-20 12:44:02 +09:00
Randy Mackay
4059e02a8c Copter: move ch6 tuning to tuning.pde 2015-01-16 15:12:58 +09:00
Jason Short
fe74a11b4e Copter: Drift mode gain changes and roll control through ch4 2015-01-15 11:55:24 +09:00
Randy Mackay
d6c48e422a Copter: restore baro climb rate check to land_detector 2015-01-14 16:08:57 +09:00
Randy Mackay
1c25c00f5b Copter: move land_detector to separate file 2015-01-14 16:08:55 +09:00
Jonathan Challinger
36410a5131 Copter: clean up land detector and modify to use desired velocity 2015-01-14 16:08:50 +09:00
Randy Mackay
0c44b5f4fe Copter: fix typo in AC3.2.1 Release Notes 2015-01-10 22:29:46 +09:00
Andrew Tridgell
557f4df77e Copter: use barometer.all_healthy() for health check in SYS_STATUS and arming 2015-01-09 11:51:51 +11:00
Andrew Tridgell
c151f24672 Copter: updates for new AP_Baro API 2015-01-09 11:50:55 +11:00
Randy Mackay
781f2b7ddc Copter: update AC3.2.1-rc1 Release Notes 2015-01-09 05:06:36 +09:00
Randy Mackay
ce9b87c101 Copter: AC3.2.1-rc1 Release Notes 2015-01-08 21:53:47 +09:00
Randy Mackay
80f59694d0 Copter: remove deprecated Guided-Spline 
Guided-Spline has been replaced by Guided-PosVel
 2015-01-07 14:03:50 +09:00
Randy Mackay
be5bf91e92 Copter: add ekf velocity scaler to posvel controller 
Also set auto-yaw-mode to yaw-hold only when posvel controller is
started instead of on every iteration.
added GUIDED_POSVEL_TIMEOUT_MS definition.
removed deprecated trigger_xy call.
Also use wp_nav.get_speed_xy in place of get_speed_param
 2015-01-07 14:03:08 +09:00
Jonathan Challinger
474456e349 Copter: use guided_posvel for set_position_target messages 2015-01-07 14:02:24 +09:00
Jonathan Challinger
bc29008233 Copter: add guided_posvel 2015-01-07 14:02:21 +09:00
Randy Mackay
06d1a4c59f Copter: use LandingGear command mode enum 2015-01-07 11:58:23 +09:00
Randy Mackay
d26fa6d827 Copter: minor format fix 
no functional change
 2015-01-07 11:58:23 +09:00
Randy Mackay
5f3c2bcd11 Copter: rename landing_gear.pde 2015-01-07 11:58:21 +09:00
Robert Lefebvre
62b5f32643 Copter: Use landinggear.force_deploy method when auto-landing 2015-01-07 11:58:20 +09:00
Robert Lefebvre
20fce5c9ff Copter: Move landing gear code into new file 2015-01-07 11:58:20 +09:00
Robert Lefebvre
fd61c3179a Copter: Remove relay pointer from LandingGear object 2015-01-07 11:58:18 +09:00
Robert Lefebvre
e10e020062 Copter: Add Landing Gear functionality to main code 2015-01-07 11:58:16 +09:00
Staroselskii Georgii
84a15304a1 Copter: added AK8963 support 2015-01-07 08:41:13 +11:00
Randy Mackay
f54a13f24b Copter: report NAV_CONTROLLER_OUTPUT in RTL, Guided 
This allows the GCS to display to the user where the vehicle is flying
to in RTL and Guided flight modes
 2015-01-06 16:38:34 +09:00
Robert Lefebvre
d7ba808400 ArduCopter: Bug fix, int8t should be uint16t. 2015-01-06 15:02:48 +09:00
Robert Lefebvre
205b312789 Copter: GCS Failsafe comments and format changes 2015-01-05 10:34:17 +09:00
Robert Lefebvre
5f19a43104 Copter: GCS Failsafe to trigger if using Guided mode 2015-01-05 10:33:50 +09:00
Andrew Tridgell
c268d7252f Copter: fixed flymaple build 2015-01-05 07:36:40 +11:00
Andrew Tridgell
cb5552f0e3 Copter: fixed build with optflow disabled 2015-01-04 12:29:22 +11:00
Andrew Tridgell
ab62105afe Copter: use common send_opticalflow() 2015-01-03 15:53:49 +11:00
Andrew Tridgell
788bb8ab9f Copter: make optflow available to AHRS 2015-01-03 14:16:34 +11:00
Andrew Tridgell
c784ee717b Copter: update for new OptFlow API 2015-01-03 14:16:33 +11:00
Randy Mackay
f1f71ef605 Copter: cli uses has_current method 2014-12-31 15:22:50 +09:00
Randy Mackay
3ccc61c163 Copter: use battery.has_current method 2014-12-31 15:22:49 +09:00
Randy Mackay
d6b4bfd97f Copter: move underscore in BATT_ parameters 2014-12-31 15:22:48 +09:00
Randy Mackay
2e7435df52 Copter: remove unused OF_LOITER pid defines 2014-12-31 13:16:18 +09:00
Randy Mackay
3e34e7ed7e Copter: remove logging dependency on optflow 2014-12-31 13:16:17 +09:00
priseborough
695f12bec0 Copter: Don't log EKF optical flow data if not required 2014-12-31 13:16:12 +09:00
Randy Mackay
f2b0fc3566 Copter: disarm on landing regardless of pilot input 2014-12-27 13:33:06 +09:00
Randy Mackay
72127cde35 Copter: remove broken support for do-change-alt 
This command was not implemented fully removing this code resolves a
compiler warning
 2014-12-26 22:17:45 +09:00
Randy Mackay
2bc1b7e4d6 Copter: skip pre-arm checks when already armed 2014-12-26 22:01:43 +09:00
Randy Mackay
990a34cb75 Copter: remove support for do-set-home mission command 
This avoids the chance of an arithmetic exception in cases where the
position is moved too far
 2014-12-26 15:55:26 +09:00
Randy Mackay
2ea9b8a5a8 Copter: set pre_arm_gps_check flag 2014-12-26 12:32:36 +09:00
Randy Mackay
05fedbf98f Copter: minor formatting fixes 2014-12-18 16:38:34 +09:00
Jonathan Challinger
91bff63267 Copter: Fix LAND overshoot issue 2014-12-18 16:38:31 +09:00
Randy Mackay
b6bcf841e1 Copter: remove second camera mount 2014-12-16 21:26:20 +09:00
Jonathan Challinger
cafb38e923 Copter: allow radio failsafe while disarmed so that user can be notified 2014-12-15 14:10:29 +09:00
Randy Mackay
79e40b4f6a Copter: do not send mode_change event before init complete 
This avoids a beep as the flight mode is set during start-up
 2014-12-15 14:10:23 +09:00
Randy Mackay
562f3e7382 Copter: set notify event when failsafe changes flight mode 2014-12-15 14:10:19 +09:00
Randy Mackay
6a15d21704 Copter: minor format change 2014-12-15 14:10:13 +09:00
Jonathan Challinger
f045c75bfe Copter: play various tones 2014-12-15 14:09:12 +09:00
Randy Mackay
fd55a2d9c4 Copter: increase GPS_HDOP_GOOD default to 2.3 2014-12-15 10:45:50 +09:00
Andrew Tridgell
e73f8b8e40 Copter: removed use of mavlink_check_target() 2014-12-11 12:32:34 +09:00
Randy Mackay
67f48168a8 Copter: send OPTICAL_FLOW msg to GCS 2014-12-08 14:58:31 +09:00
Randy Mackay
641c770726 Copter: send optflow health in extended status 2014-12-08 14:58:28 +09:00
Randy Mackay
882546aa8e Copter: optflow logging minor format change 2014-12-08 14:58:27 +09:00
Randy Mackay
3127dd94c1 Copter: add OPTFLOW to default logging 2014-12-08 14:58:27 +09:00