Siddharth Purohit
3e194903cc
AP_UAVCAN: add Flow message to the sniffer test
2019-07-08 12:18:29 +10:00
Siddharth Purohit
67c925865c
HAL_ChibiOS: add support for CAN on STM32H7 boards
2019-07-08 12:18:29 +10:00
Siddharth Purohit
1cd8e0e237
BoardConfig: set slcan can port to 0 as default
...
This is to ensure that can bus filters are actually used
2019-07-08 12:18:29 +10:00
Peter Barker
b123abbe90
AP_Notify: add SITL Notify display
2019-07-08 10:56:54 +10:00
Peter Barker
a61028c55d
AP_HAL_ChibiOS: disable scripting if USE_FATFS=no
2019-07-08 09:55:46 +10:00
U-REDMOND\akolobov
6dd906f07f
HAL_SITL: Integrating Silent Wings SITL with the sim_vehicle
2019-07-08 09:32:59 +10:00
U-REDMOND\akolobov
3330b62d3c
SITL: aded support for SilentWings simulator
2019-07-08 09:32:59 +10:00
Randy Mackay
bd3d352554
AC_Avoidance: remove comment from Dijkstra's
2019-07-07 04:08:34 -07:00
Randy Mackay
655ddd4ab3
AC_Avoidance: Dijkstra's ignores invalid polygon fences
2019-07-07 04:08:34 -07:00
Randy Mackay
614b0f6dc8
AP_Math: Polygon_intersects handles unclosed polygons
2019-07-07 04:08:34 -07:00
PraiseSatan
bad5fb418d
AP_RCProtocol: added ibus RX support to recieve channel data from ibus transmitters.
2019-07-07 20:49:18 +10:00
Andrew Tridgell
92783bccfa
AP_NavEKF3: don't allow height datum reset when not on ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
e8d9a1fae9
AP_NavEKF2: don't allow height datum reset when not on ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
3f9e48951b
AP_NavEKF3: set terrainState to zero on height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
f5fd38aef2
AP_NavEKF2: set terrainState to zero on height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
f3fc910abe
AP_NavEKF3: continuously update gpsGoodToAlign
...
use it to determine how to handle a height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
9372073f63
AP_NavEKF2: continuously update gpsGoodToAlign
...
use it to determine how to handle a height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell
b9a5794671
AP_NavEKF3: ensure that both AMSL and relative alt are correct after a reset
...
this forces the EKF origin to the GPS alt on a height datum reset if
we have GPS lock. If we don't do this then the reported AMSL alt will
drift over time away from the GPS alt when we reset while on the
ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
20ebb2500b
AP_NavEKF2: ensure that both AMSL and relative alt are correct after a reset
...
this forces the EKF origin to the GPS alt on a height datum reset if
we have GPS lock. If we don't do this then the reported AMSL alt will
drift over time away from the GPS alt when we reset while on the
ground
2019-07-07 19:20:32 +10:00
Andrew Tridgell
a38b030c41
RC_Channel: disable kill IMU with HAL_MINIMIZE_FEATURES
2019-07-07 19:03:01 +10:00
Andrew Tridgell
8e5c0fa32b
AP_InertialSensor: disable kill IMUs with HAL_MINIMIZE_FEATURES
2019-07-07 19:03:01 +10:00
Andrew Tridgell
2208689893
AP_NavEKF3: don't use disabled gyros in opticalflow takeoff detection
2019-07-07 19:03:01 +10:00
Andrew Tridgell
ddef40fa3d
AP_NavEKF2: don't use disabled gyros in opticalflow takeoff detection
2019-07-07 19:03:01 +10:00
Andrew Tridgell
a45e364252
AP_Mount: don't use disabled IMUs in solo gimbal code
2019-07-07 19:03:01 +10:00
Andrew Tridgell
3dd7e7e83a
AP_AHRS: only use enabled IMUs in DCM
...
honor the INS_USE parameters for DCM
2019-07-07 19:03:01 +10:00
Andrew Tridgell
09d3392aee
AP_InertialSensor: zero accumulators on time step
...
this zeros the delta angle and delta velocity accumulators when a
sensor is unavailable for a period of 0.1s. This prevents garbage
values being passed into the EKF when a sensor dies and then becomes
available again some time later
2019-07-07 19:03:01 +10:00
Andrew Tridgell
3444e82ef9
AP_InertialSensor: added RC switch for killing IMUs
2019-07-07 19:03:01 +10:00
Andrew Tridgell
30d27147a8
RC_Channel: added RC switch for killing IMUs
2019-07-07 19:03:01 +10:00
Andrew Tridgell
898150e460
HAL_ChibiOS: cope with calling delay_microseconds_boost() multiple times
...
needed for updated IMU wait code
2019-07-07 19:03:01 +10:00
Andrew Tridgell
053f0cb689
AP_InertialSensor: try much harder to get all IMU samples
...
this we ensures we get new data for all active IMUs on each loop,
rather than sometimes returning with some IMUs not having data.
This matters as not having a sample on an IMU for a single loop can
cause an EKF IMU failover, which will degrade the learned bias
variances
The issue is usually only seen under high load, such as requesting a
loop rate beyond what the hardware is capable of
2019-07-07 19:03:01 +10:00
Andrew Tridgell
209bca162c
AP_NavEKF3: added inactive bias learning
...
this allows for biases on inactive IMUs to be learned so that an IMU
switch within an EKF lane does not cause a jump in the IMU data
2019-07-07 19:03:01 +10:00
Andrew Tridgell
1c4c5a6850
AP_NavEKF2: learn gyro biases for inactive gyros
...
this allows us to learn the gyro biases each lane would need if it had
to switch to another gyro due to a sensor failure. This prevents a
sudden change in gyro bias on IMU failure
2019-07-07 19:03:01 +10:00
Andrew Tridgell
05bd0cb9f4
APM_Control: added decay_I() function
...
used by VTOL planes to decay integrator on fixed wing components when
at very low airspeed
2019-07-07 18:16:47 +10:00
Randy Mackay
030eab0f86
AR_WPNav: stop vehicle if OA processing fails
2019-07-07 06:46:26 +09:00
Randy Mackay
951ded1f51
AP_OAPathPlanner: report errors to caller
2019-07-07 06:46:26 +09:00
Michael du Breuil
104164d2e4
AP_Scripting: Tighten range checks on library calls
2019-07-06 09:01:13 -07:00
Peter Barker
ce45baa034
AP_NavEKF3: factor out and logging functions, reuse for 2nd core
2019-07-06 19:05:51 +10:00
Peter Barker
6a0a466f42
AP_NavEKF2: factor out and logging functions, reuse for 2nd core
2019-07-06 19:05:51 +10:00
Peter Barker
9732940220
AP_AHRS: navekf: add Log_Write access point
2019-07-06 19:05:51 +10:00
Peter Barker
f3f364de26
AP_NavEKF3: move logging in from AP_Logger
2019-07-06 19:05:51 +10:00
Peter Barker
5175d23cc1
AP_NavEKF2: move logging in from AP_Logger
2019-07-06 19:05:51 +10:00
Peter Barker
e009b7aee5
AP_Logger: move logging of EKF packets out to EKF
2019-07-06 19:05:51 +10:00
Peter Barker
c6533723de
GCS_Param: correct sending of parameters of length 16
2019-07-06 18:06:17 +10:00
Andrew Tridgell
5ffb8bb546
AP_HAL: enable GPIO scripting on the Disco
2019-07-06 09:02:54 +10:00
Andrew Tridgell
2bab0efc41
HAL_Linux: implement HAL_GPIO_SCRIPT support
...
this allows Linux boards to trigger an external script on GPIO
writes. This can be hooked up to relays with either RC options or
mavlink or mission items to trigger actions that can be scripted
2019-07-06 09:02:54 +10:00
Andrew Tridgell
8a49c84d57
AP_Motors: fixed col max and min for dual heli
...
fixes H_SV_MAN behaviour
2019-07-06 08:57:18 +10:00
Andrew Tridgell
0f4c54aaa6
AP_RCProtocol: fixed a overflow in SRXL decoder
...
thanks to coverity 343308 and Peter for noticing
2019-07-06 08:53:44 +10:00
Andrew Tridgell
626c632859
SITL: fixed pitch constraint on fixed wing takeoff
...
fixes issue with jet takeoff
2019-07-05 20:12:22 +10:00
Andrew Tridgell
5bfb6ced84
AP_GPS: fixed u-blox F9 auto configuration
2019-07-05 13:31:40 +10:00
Peter Barker
502f74f0d9
AP_Logger: switch to using stderr for log structure debug
...
The console output doesn't seem to appear anywhere now.
2019-07-05 12:05:27 +10:00
Peter Barker
288952b5a2
AP_Logger: reserve W for watts as a unit
2019-07-05 12:05:04 +10:00
Peter Barker
c515d17a4a
AP_ServoRelayEvents: use Relay singleton
2019-07-03 23:59:24 -07:00
Peter Barker
8e5ec84317
AP_Relay: add AP::relay() to get relay singleton
2019-07-03 23:59:24 -07:00
Rajat Singhal
82413a1528
SITL: JSBSim: Fix comments
2019-07-03 23:58:22 -07:00
Peter Barker
39b17e42d0
AP_HAL_SITL: add missing include for AP_BoardConfig.h
2019-07-04 13:57:40 +10:00
Peter Barker
ebd8170a15
GCS_MAVLink: add missing include for AP_RTC
2019-07-04 13:57:40 +10:00
Peter Barker
3d91547039
AP_Logger: add missing include for AP_RTC
2019-07-04 13:57:40 +10:00
Peter Barker
cee3d8086b
AP_InternalError: move include of BoardConfig to cpp
...
This breaks an include loop when building for skyviper-v2450
2019-07-04 13:57:40 +10:00
Atxheli
7f3cb09da2
correct comment placement for second led
2019-07-04 08:36:33 +10:00
Hwurzburg
a9783de61c
correct include paths, uncomment alarm pin, fix conflict with rssi
2019-07-04 08:36:33 +10:00
Hwurzburg
3e3d7b8e7f
Change to "include" style for new board, fix to allow LED to be used as status indicator
2019-07-04 08:36:33 +10:00
Hwurzburg
10838387c5
Split Omnibus F4 pro and non-pro into two boards to allow pro boards to have 8 pwm outputs
2019-07-04 08:36:33 +10:00
Andrew Tridgell
5151416080
AP_NavEKF3: force first EKF lane when disarmed
...
this ensures we consistently fly with EKF lane1 if it is healthy at
the point we arm. Otherwise the choice of lane will be a lottery.
This is important as many systems have quite different filtering and
vibration characteristics on their different IMUs. We by default
enable fast sampling only on the first IMU for example, which means
the 2nd and 3rd IMUs are more vulnerable to high freq causing
aliasing.
2019-07-04 06:48:23 +10:00
Andrew Tridgell
567c902e75
AP_NavEKF2: force first EKF lane when disarmed
...
this ensures we consistently fly with EKF lane1 if it is healthy at
the point we arm. Otherwise the choice of lane will be a lottery.
This is important as many systems have quite different filtering and
vibration characteristics on their different IMUs. We by default
enable fast sampling only on the first IMU for example, which means
the 2nd and 3rd IMUs are more vulnerable to high freq causing
aliasing.
2019-07-04 06:48:23 +10:00
Tom Pittenger
bf11746da5
AP_AHRS: allow EKF_TYPE==10 to send a good status report
...
Some GUIs, including DroneKit, will consider GPS locations invalid if the EKF status is not good
2019-07-03 21:22:09 +10:00
Peter Barker
e58eae3c48
AP_Mount: remove unneeded typedefs
...
Also note that one of these was incorrectly sized.
2019-07-03 16:12:40 +09:00
Peter Barker
08b2676a8f
AP_Notify: add comments explaining tonealarm tone format
2019-07-03 17:05:06 +10:00
Andrew Tridgell
2eb09b2910
SITL: simple implementation of a fast jet
...
just increase the weight and the rest can be done with params
2019-07-03 08:05:09 +10:00
Peter Barker
84eff51539
AP_Arming: remove stray comment on removed parameter
...
Almost certainly a rebase issue
2019-07-02 10:03:41 +10:00
Peter Barker
f31b7b5772
GCS_MAVLink: remove stray undef of undefined macro
2019-07-02 10:02:55 +10:00
Alexey Kozin
e5988f7153
AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc
2019-07-02 06:42:11 +10:00
Peter Barker
7b52c41287
AP_Compass: fix example by instantiating serial_manager
2019-07-01 19:11:03 +10:00
Peter Barker
ef2589738d
AP_NavEKF3: use beacon singleton
2019-07-01 07:20:58 +09:00
Peter Barker
82df167ad4
AP_NavEKF2: use beacon singleton
2019-07-01 07:20:58 +09:00
Peter Barker
d9c30f489f
AP_Logger: use beacon singleton
2019-07-01 07:20:58 +09:00
Peter Barker
2bcaaf5aaf
AP_AHRS: remove handling of beacon
2019-07-01 07:20:58 +09:00
Peter Barker
04ebb9de0b
AP_Airspeed: use send_to_active_channels for airspeed_autocal
2019-06-29 16:04:26 +10:00
bugobliterator
7d4a758059
hwdef: fix default battery monitor pins for CubeOrange
2019-06-28 14:18:11 +10:00
bugobliterator
71ee4d573f
AP_BattMonitor: add battery pin config for CubeOrange
2019-06-28 14:18:11 +10:00
Michael du Breuil
cfa54d4ca4
AP_Module: update example baro include
2019-06-27 14:56:21 +10:00
Michael du Breuil
ca65b214af
AP_TECS: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
99ff84168c
AP_Terrain: Remove unneeded includes
2019-06-27 14:56:21 +10:00
Michael du Breuil
e43605cc9b
AP_Airspeed: Remove a number of unneeded top level includes
2019-06-27 14:56:21 +10:00
Michael du Breuil
a6623bfad3
AP_HAL_SITL: Fix missing include for logger.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
b7bca441e5
SITL: Fix a number of includes that were coming in via AP_Airspeed
2019-06-27 14:56:21 +10:00
Michael du Breuil
1226eb825a
AP_AHRS: Reduce scope of AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
1a7502b413
AP_VisualOdom: Remove uneeded include
2019-06-27 14:56:21 +10:00
Michael du Breuil
7a03b8faac
AP_InertialNav: Remove undeeded includes
2019-06-27 14:56:21 +10:00
Michael du Breuil
9b162563d6
AP_Advanced_Failsafe: Reduce scope of AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
b624f6f008
AP_NavEKF3: Reduce scope of AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
f04e47fc17
AP_NavEKF2: Reduce scope of AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
6385e3ceac
AP_TempCalibration: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
9ed3242c06
AP_Tuning: Reduce header scope
2019-06-27 14:56:21 +10:00
Michael du Breuil
18e979fd4f
GCS_MAVLink: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
631b4380e1
AP_OSD: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
6480786ab2
AP_Mount: Cleanup SoloGimalEKF headers further
2019-06-27 14:56:21 +10:00
Michael du Breuil
eeca59d1ef
AP_Arming: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
Michael du Breuil
2dcbe5a49b
AP_ADSB: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
Peter Barker
61e261caf5
AP_Soaring: remove definition of 'N' macro in favour of scoped variable
2019-06-27 14:40:44 +10:00
Peter Barker
54ba686855
AP_InternalError: add bit for asking for a non-existant gcs backend
2019-06-27 07:54:45 +10:00
Michael du Breuil
67898d7320
AP_FrSky_Telem: Don't statically allocate the statustext_queue
...
This saves 280 bytes of RAM
2019-06-26 11:59:41 +10:00
Michael du Breuil
f955a4e4d5
GCS_MAVLink: Don't retain a FrSky instance if we aren't using it
...
Saves 96 bytes of RAM
2019-06-26 11:59:41 +10:00
Michael du Breuil
59e62ca2fc
AP_FrSky_Telem: Make init return false if we failed to init
2019-06-26 11:59:41 +10:00
Peter Barker
278ac5e6ed
GCS_MAVLink: correct deferred body timing debug
2019-06-25 19:59:49 +10:00
Peter Barker
feddaabc42
GCS_MAVLink: handle out-of-time to send messages in parent class
2019-06-25 10:29:40 +10:00
Andrew Tridgell
88111ef81a
AP_BattMonitor: reset failsafe flags when we reset battery remaining
2019-06-25 09:56:25 +10:00
Andrew Tridgell
f28df4dff1
GCS_MAVLink: support MAV_CMD_BATTERY_RESET command
2019-06-25 09:56:25 +10:00
Andrew Tridgell
11518857b6
AP_BattMonitor: added reset_remaining() API
...
used to allow battery swap before takeoff
2019-06-25 09:56:25 +10:00
Peter Barker
a55c40949b
GCS_MAVLink: remove pointless protocol parameter to setup_uart
2019-06-25 09:47:08 +10:00
Peter Barker
ca449cd979
GCS_MAVLink: stop pointlessly passing serial manager around
2019-06-25 09:47:08 +10:00
Peter Barker
45fab82345
GCS_MAVLink: eliminate redundant static pointer to serialmanager
2019-06-25 09:47:08 +10:00
Randy Mackay
0b62641a46
AC_Avoidance: fix Dijkstra's iteration through polygon fence points
2019-06-25 00:32:18 +08:00
Peter Barker
afd63c05ec
AP_Tuning: ignore tuning selector switch unless valid RC input
2019-06-25 00:31:54 +08:00
Peter Barker
288b13868b
AP_Tuning: debounce RC input
2019-06-25 00:31:54 +08:00
Andrew Tridgell
b6dbb8f464
GCS_MAVLink: always show AHRS healthy with EKF type 10
...
this fixes an issue noticed by Marco with xplane
2019-06-25 00:28:45 +08:00
Andrew Tridgell
5ac2aad2f8
AP_Mission: fixed valgrind error on writing mission items
2019-06-24 18:19:14 +08:00
Andrew Tridgell
0ca71ba725
AP_HAL: added get_last_armed_change() Util function
2019-06-21 11:40:53 +10:00
Andrew Tridgell
8fc8bc4d84
AP_Arming: notify logging system of an arming failure
2019-06-21 11:40:53 +10:00
Andrew Tridgell
dd3eec2a38
AP_Logger: persist logging for 15s after disarm or arming failure
...
this will provide useful information in logs on disarms in flight or
reasons for arming failure
2019-06-21 11:40:53 +10:00
Randy Mackay
df6c666740
AP_Common: add AP_ExpandingGeneric to reduce code size
2019-06-20 15:09:23 +09:00
Randy Mackay
4ef3005d2c
AP_Common: add AP_ExpandingArray delete
2019-06-20 15:09:23 +09:00
Randy Mackay
578023483c
AC_Avoidance: Dijkstra's expanding arrays use 32 elements per chunk
2019-06-20 15:09:23 +09:00
Randy Mackay
2cb89d9a02
AP_Common: expanding array uses realloc
...
also make chunk_size const and recommend factor of 2
also reduce top level array's initial size to 32 elements
2019-06-20 15:09:23 +09:00
Randy Mackay
da645c32ff
AC_Avoidance: Dijkstra's specifies expanding array chunk sizes
...
also add check that number of polygon points is less than 255
2019-06-20 15:09:23 +09:00
Randy Mackay
073ce8c3db
AP_ExpandingArray: add class description and remove default constructor
...
also made the following changes:
replaced delete with free
renamed chunk_ptr typedef to chunk_ptr_t
2019-06-20 15:09:23 +09:00
Randy Mackay
48a7f468bf
AC_Avoidance: AP_OADijkstra and OAVisGraph use AP_ExpandingArray
2019-06-20 15:09:23 +09:00
Randy Mackay
528e7c60b0
AP_Common: add AP_ExpandingArray class
2019-06-20 15:09:23 +09:00
Peter Barker
1ff3cd442d
AP_Mission: fix example by instantiating a GCS object
2019-06-20 13:40:28 +10:00
Peter Barker
c11da6a85d
GCS_MAVLink: routing example: use GCS_Dummy in place of custom GCS
2019-06-20 11:41:19 +10:00
Jaaaky
061b4b7e70
AP_Airspeed: convert to unix style end-of-line
2019-06-19 16:39:09 +09:00
Andrew Tridgell
767968026a
AP_AdvancedFailsafe: added docs for AFS output pins
2019-06-18 17:20:55 +01:00
Michael du Breuil
75c62154b5
AP_HAL_SITL: Add missing override declarations
2019-06-18 00:06:32 -07:00
Michael du Breuil
a34ac14ec5
AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time
2019-06-18 00:06:32 -07:00
Michael du Breuil
0a7cf77de4
AP_AHRS: Update function descriptions in header
2019-06-18 00:06:32 -07:00
Michael du Breuil
0ed3c547fd
AP_Scripting: Disable by default, fix a nullable type, update README
2019-06-18 00:06:32 -07:00
Peter Barker
ccbf3234f7
AP_HAL_SITL: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
Peter Barker
a9c4f1d0d5
AP_HAL_Linux: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
Peter Barker
1f4de871da
AP_HAL_ChibiOS: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
Peter Barker
92111eea61
AP_HAL: require HALs implement rcin.protocol() to return RC protocol
2019-06-18 11:35:38 +10:00
Peter Barker
7bca6d5ec0
AP_Logger: log RC protocol each time a log is opened
2019-06-18 11:35:38 +10:00
Peter Barker
0963957b31
GCS_MAVLink: correct GCS_Dummy firmware version
2019-06-18 10:54:01 +10:00
Peter Barker
c39a622653
GCS_MAVLink: take sw_version from AP_FWVersion struct
2019-06-18 10:54:01 +10:00
Peter Barker
b48c729bb1
AP_Common: add os_sw_version to AP_FWVersion
2019-06-18 10:54:01 +10:00
Peter Barker
8f8851271a
RC_Channel: add mode-changing options to Plane RC channel options
2019-06-18 10:48:47 +10:00
Peter Barker
a2c4bfea0c
GCS_MAVLink: use send_to_active_channels for parameters
2019-06-18 10:27:56 +10:00
vierfuffzig
7780e8ed00
AP_HAL_ChibiOS: add support for AIO and OSD board types
...
this allows init on board variant without onboard baro
2019-06-18 10:10:22 +10:00
Michael du Breuil
6e0cceff0d
AP_Common: Remove extra comparison from longitude_scale()
2019-06-18 10:09:09 +10:00
Peter Barker
4e5842a150
AP_Common: add initialised() method to Location
...
Sometimes code paths are crossed when they shouldn't be. This method
can help in the short term if a codepath is calling methods on a
Location when it is not initialised, but generally a vehicle should be
calling position_ok() and other methods rather than this one.
2019-06-18 09:07:56 +09:00
Michael du Breuil
4aa33bec49
AP_AHRS: Remove AP_GPS.h from AP_AHRS.h
2019-06-18 10:02:05 +10:00
Michael du Breuil
197804412a
APM_Control: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
a09ead5819
AP_ADSB: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
3194b073ca
AP_AdvancedFailsafe: Use AP_GPS singleton
2019-06-18 10:02:05 +10:00
Michael du Breuil
157a3b1e34
AP_Airspeed: Fix AP_GPS.h include and use the singleton
2019-06-18 10:02:05 +10:00
Michael du Breuil
c70107cabb
AP_Arming: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
889d9b7348
AP_Frsky: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
f6f432a785
AP_Landing: Fix AP_GPS.h include, use a ref to the singleton
2019-06-18 10:02:05 +10:00
Michael du Breuil
f8750a6d18
AP_Logger: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
459e6704b9
AP_Module: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
fbd19f30e7
AP_Mount: Reduce header includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
892b687c09
AP_NavEKF2: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
be74b631fe
AP_NavEKF3: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
2ab8a2318e
AP_OSD: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
cbcd959290
AP_Terrain: Fix AP_GPS.h include
2019-06-18 10:02:05 +10:00
Michael du Breuil
be7afe346b
GCS_MAVLink: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
6317355390
RC_Channel: Fix AP_GPS include
2019-06-18 10:02:05 +10:00
Michael du Breuil
23439de39a
AP_Logger: Don't include AP_BattMonitor which we don't need
2019-06-18 10:02:05 +10:00
Michael du Breuil
ba4c589ff2
AP_OSD: Fix depending upon AP_Logger for AP_BattMonitor header
2019-06-18 10:02:05 +10:00
Michael du Breuil
f6b8bf49a1
AP_Motors: Simplify the example includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
8c00102259
GCS_MAVLink: Reduce scoping on AP_BattMonitor include
2019-06-18 10:02:05 +10:00
Michael du Breuil
eed710db5f
AP_GPS: Fix a lot of unneded example includes
2019-06-18 10:02:05 +10:00
Michael du Breuil
9fc954b030
AP_Compass: Reduce scope of BattMonitor include
2019-06-18 10:02:05 +10:00
Michael du Breuil
03a4dda810
AP_Mount: Remove unneeded dependency on AP_Airspeed, and bad example
2019-06-18 10:02:05 +10:00
Peter Barker
b902316139
AP_HAL: remove buggy write implementation
2019-06-17 17:20:57 +10:00
Pierre Kancir
209b0300a5
AP_Rangefinder: fix compilation for Bebop
2019-06-14 18:56:05 -07:00
Randy Mackay
bba81b2794
AC_Avoidance: Dijkstra's exits early if polygon fence disabled
2019-06-14 08:06:17 +09:00
Peter Barker
da5d5c9203
AP_Math: add tests for Vector2
2019-06-13 19:36:49 +10:00
Jaaaky
fb311208ab
AP_AHRS: Fix DCM gndVelADS on groundspeed_vector() with airspeed_use
2019-06-13 16:31:12 +10:00
Randy Mackay
fb284ff26a
AP_ServoRelayEvents: minor formatting fix
2019-06-13 09:51:21 +09:00
Tatsuya Yamaguchi
012fcae388
AP_ServoRelayEvents: allow DO_SET_SERVO commands while rc pass-thru
2019-06-13 09:51:21 +09:00
Tatsuya Yamaguchi
f9547fa28e
SRV_Channel: allow DO_SET_SERVO commands while rc pass-thru
2019-06-13 09:51:21 +09:00
Rishabh
ce48b82500
AC_WPNav: remove brake
2019-06-13 09:02:46 +09:00
Peter Barker
c59dde78c6
AP_HAL_SITL: dump stack trace as part of panic()
2019-06-13 09:25:42 +10:00
Peter Barker
dd68b14f46
AP_HAL_SITL: move dump_strack_trace into HAL
2019-06-13 09:25:42 +10:00
Peter Barker
c3a99c8eb0
AP_HAL: move dump_strack_trace into HAL
...
Use a weak definition to allow subclasses to override
2019-06-13 09:25:42 +10:00
Randy Mackay
cceab9c88f
AC_Avoidance: fix BendyRuler when outside polygon fence
2019-06-12 14:54:33 +09:00
Peter Barker
cc7044b360
AP_Scheduler: include internal error count in PM log message
2019-06-12 10:05:59 +10:00
Peter Barker
733b7b7f1a
AP_Logger: include internal error count in log structure
2019-06-12 10:05:59 +10:00
Peter Barker
5f877294c9
AP_Logger: re-add lost validate_structure loop
...
Lost with bad rebase
2019-06-12 10:05:59 +10:00
Peter Barker
cd0265644d
AP_Logger: disable float-mult-zero sanity check for the time being
2019-06-12 10:05:59 +10:00
Peter Barker
ae85994c59
GCS_MAVLink: include internal error count as errors4 in SYS_STATUS
2019-06-12 10:05:59 +10:00
Peter Barker
256b6703f1
AP_InternalError: keep count of number of errors having occured
2019-06-12 10:05:59 +10:00
Andrew Tridgell
99316a191c
AP_AHRS: added check_lane_switch()
2019-06-12 09:52:20 +10:00
Andrew Tridgell
60831c2878
AP_NavEKF3: added checkLaneSwitch()
...
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
2019-06-12 09:52:20 +10:00
Andrew Tridgell
3073c4da7a
AP_NavEKF2: added checkLaneSwitch()
...
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
2019-06-12 09:52:20 +10:00
Peter Barker
f385a4a329
GCS_Common: fix compiler warnings on missing parentheses
2019-06-11 21:50:53 +10:00
Randy Mackay
6ed09d83f3
GCS_MAVLink: send_home_position uses const Location reference
2019-06-11 13:13:22 +09:00
Randy Mackay
0a86bbdc9a
AC_Avoidance: add license to cpp file
2019-06-11 13:13:22 +09:00
Randy Mackay
70e9881880
AR_WPNav: integrate OAPathPlanner
2019-06-11 13:13:22 +09:00
Randy Mackay
af80070ed9
AP_OAPathPlanner: path planning around obstacles
...
implements both bendy ruler and dijkstra's algorithms
includes many changes after peer review including:
removed unused airspeed and turn-rate arguments
renamed constants to start with OA_BENDYRULER_
removed fence_ptr check from update function that could cause bendy ruler to fail when fences were disabled
AC_Fence's fence-margin is not used and instead we always use a hard-coded 2m limit
vehicle's heading is used instead of ground-course when speed is below 0.2m/s
static assert added to ensure OA_BENDYRULER_BERAING_INC constant is defined correctly
replace BAD_MARGIN/GOOD_MARGIN with FLT_MAX/-FLT_MAX
use calc_margin_from_xxx function's return values
calc-margin-from-proximity-sensors fails if copy-locations fails
remove debug
remove unused singletons
and other changes including:
integrate fence rename to get_boundary_points
adapt to fence return point and duplicate final point from not being returned
create bendyrule and dijkstra objects on init
add pre-arm-check to ensure they've been created successfully
Dijkstra's detects polygon fence changes
minor fix to Dijkstra's return path
allow update_visgraph to accept 0,0 as extra point
and these fixes from peer reviews:
remove unused methods
add note about dangers of operator[]
reduce memory consuption of ShortPathNode
remove unused methods including print_all_nodes and print_shortest_path
replace OA_DIJKSTRA_POLYGON_VISGRAPH_INFINITY_CM with FLT_MAX
update method gets check that ekf origin has been set
fix indexing bug in inner fence creation
fix whitespace error
find-node-from-id uses switch statement instead of 3 IF statements
update_visgraph comments added to clarify usage of extra_position argument
find-closest-node-idx always uses node_index instead of int16_t
static assert that OA_DIJKSTRA_POLYGON_FENCE_PTS < 255
some looping style changes
AP_OABendyRuler: fix to ground course calculation
AP_OAPathPlanner: pre_arm_check writes to caller's buffer
remove unnecessary hal and stdio.h includes
rename fence_ptr local variable to fence
add sanity check to OADijkstra's set_fence_margin
add sanity check to OABendyRuler's set_config
BendyRuler's test_bearing local constants changed to be float constants
BendyRuler's ahrs_home made local constant
BendyRuler's proximity margin calcs lose margin_found local variable (use FLT_MAX instead)
BendyRuler's calc-margin-from-circular-fence performance improvement by removing one sqrt
AP_OABendyRuler: fix probe directions to be 5deg offsets from dir to destination
AP_OADijkstra: fixes after peer review
remove unnecesary initialisations
replace safe_sqrt(sq()) with length()
remove unnecessary block
comment fixes
AP_OAPathPlanner: add logging of final an intermediate location
2019-06-11 13:13:22 +09:00
Randy Mackay
c7b1ad3443
AP_Logger: add Write_OA
2019-06-11 13:13:22 +09:00