Commit Graph

859 Commits

Author SHA1 Message Date
Jason Short 464038b3ea New Loiter control 2012-01-11 22:41:51 -08:00
Jason Short 2566f1fb95 New Loiter Gains for new Loiter methods 2012-01-11 22:41:51 -08:00
Jason Short 55cb0ad476 moved to verify_land 2012-01-11 22:41:51 -08:00
Jason Short 7978a2a21a attempting to force down without using Manual boost. 2012-01-11 22:41:51 -08:00
Jason Short db1fafaaec R9 2012-01-10 23:46:08 -08:00
Jason Short 22ebe00773 comma 2012-01-10 23:45:33 -08:00
Jason Short 7933492fec Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short 30f5ecda54 Fixed Type Error 2012-01-10 23:43:44 -08:00
Jason Short ed903c6cd3 Fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 36516161b5 Climb rate control 2012-01-10 23:43:44 -08:00
Jason Short 78925d57c2 added set_new_altitude call() 2012-01-10 23:43:44 -08:00
Jason Short 0c9dc11ac1 Added ending for auto landing 2012-01-10 23:42:27 -08:00
Jason Short 7d4067a6ed updated climb rate control
Land detector
2012-01-10 23:42:27 -08:00
Jason Short f683371508 added set_new_altitude call 2012-01-10 23:42:27 -08:00
Jason Short 581657ab7a climb rate control 2012-01-10 23:42:26 -08:00
Jason Short 439c15f3fc Added climb rate control
removed unused vars
2012-01-10 23:42:26 -08:00
Jason Short c385db412e Added altitude change flags 2012-01-10 23:42:26 -08:00
Jason Short 9cbfcac802 Made timer unsigned 2012-01-10 23:42:26 -08:00
Jason Short 9d1b1dba77 Added comments 2012-01-10 23:42:26 -08:00
Jason Short 5b00928b15 added location error calc to get better data. Otherwise we'll be 1 GPS read off. 2012-01-10 23:42:26 -08:00
Jason Short 0744179970 Added comments
moved out failsafe check. otherwise the reporting was erroneous.
2012-01-10 23:42:26 -08:00
Jason Short 5d28e97339 Moved failsafe check to more logical place 2012-01-10 23:42:26 -08:00
Jason Short f240888b49 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Pat Hickey 7961021895 ArduCopter motors_y6: rewrite CH_ macros with MOT_ macros 2012-01-09 22:06:49 -08:00
Pat Hickey 397aef9c2a ArduCopter motors_y6: rewrite loop in terms of motors 2012-01-09 22:06:49 -08:00
Pat Hickey 2f11c3f17a ArduCopter motors_tri: rewrite CH_ macros with MOT_ macros
* Third Tricopter motor was on CH_4, so it is called MOT_4. This
  will be changed in a subsequent commit.
2012-01-09 22:06:49 -08:00
Pat Hickey 757471c3a3 ArduCopter motors_octa_quad: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 22:06:48 -08:00
Pat Hickey ee7356c1a7 ArduCopter motors_octa_quad: rewrite loop in terms of motors 2012-01-09 22:05:01 -08:00
Pat Hickey f8aa1456cc ArduCopter motors_octa: rewrite remainder from CH_ macros to MOT_ macros 2012-01-09 21:57:02 -08:00
Pat Hickey ad5c31cd38 ArduCopter motors_octa: rewrite janky loops to use ch_of_mot
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
2012-01-09 21:57:02 -08:00
Pat Hickey f055cbc720 ArduCopter motors_hexa: rewrite remainder from CH_ macros to MOT_ macros. 2012-01-09 21:57:02 -08:00
Pat Hickey 2cf935e2d2 ArduCopter motors_hexa: rewrite janky loops to use ch_of_mot
* Previously the loop was written over channels, now it is over motors
* the correct channel for that motor is determined by ch_of_mot.
* ch_of_mot is defined correctly based on the config_channels macros.
2012-01-09 21:57:02 -08:00
Pat Hickey b8b6e3c25b ArduCopter: add ch_of_mot lookup to motors.pde 2012-01-09 21:57:02 -08:00
Pat Hickey 87735fef24 ArduCopter test.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey 20b0e4cd33 ArduCopter setup.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Pat Hickey 38c2a052be ArduCopter radio.pde: translate CH_ to MOT_ outputs 2012-01-09 21:57:02 -08:00
Pat Hickey 8d4db05f50 Rename ArduCopter/config_motors.h to config_channels.h 2012-01-09 21:57:02 -08:00
Pat Hickey b22920c0ea ArduCopter: Change TRI_FRAME yaw servo output to CH_TRI_YAW define 2012-01-09 21:57:02 -08:00
Pat Hickey ccff9041f8 ArduCopter Camera.pde: changed from CH_n to CH_CAM_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey 8d595d7c53 motors_quad: translate from CH_ to MOT_ notation. 2012-01-09 21:57:02 -08:00
Pat Hickey 7b056f208d ArduCopter: include config_motors.h in sketch 2012-01-09 21:57:01 -08:00
Pat Hickey e969e0dc55 ArduCopter config_motors.h: stubs in for CH_CAM_PITCH and CH_CAM_ROLL 2012-01-09 21:57:01 -08:00
Pat Hickey eb345c009b ArduCopter config_motors.h: proper defs for APM1 MOT_[5..8] 2012-01-09 21:57:01 -08:00
Pat Hickey bcb43ec9b5 ArduCopter config.h: add standard ifndef/define header macro wrappers 2012-01-09 21:57:01 -08:00
Pat Hickey a1cc77f41e ArduCopter: add config_motors.h with MOT_n to CH_m mapping
* APM1 values are not valid, but hopefully APM2 will stay that way?
2012-01-09 21:57:01 -08:00
Pat Hickey d015e0d6d9 APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
2012-01-09 21:57:01 -08:00
Jason Short ba72a98345 Slowed Auto Descent
Don't return true in Landing code to prevent flyways in Stabilize
2012-01-08 23:01:22 -08:00
Randy Mackay 7b9701fdd5 ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
analoguedevices 8b68da3105 Put in commented-out APM2 #defines, to save people the trouble of having to type them in themselves 2012-01-09 01:59:55 +00:00
Jason Short fda12c8902 Added Acro to Rate_P 2012-01-08 14:52:10 -08:00
Randy Mackay 598593e1fc ArduCopter - changed Sonar to use A1 (was AN4) 2012-01-08 17:48:30 +09:00
Jason Short a8574e813d R8 2012-01-07 22:28:03 -08:00
Jason Short 0a7378856d Added finish to missions - auto-land or stabilize 2012-01-07 22:27:26 -08:00
Jason Short cf5e0b3a1b converted auto land to use the mission planner version
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
2012-01-07 22:27:26 -08:00
Jason Short 12493d6431 Moved wind comp into a define 2012-01-07 22:27:26 -08:00
Jason Short 7e96e0f7fa Quad frame - X is default
added wind comp stability option to config - off by default
2012-01-07 22:27:26 -08:00
Jason Short 250545f31d Auto-land updates - removed sonar option - not needed
updates from JLN
2012-01-07 22:27:26 -08:00
Jason Short ca80dc549c Made RTL hold position until it reaches altitude 2012-01-07 22:27:26 -08:00
Jason Short b8bcd81b39 Cleanup 2012-01-07 22:27:26 -08:00
Jason Short 048532ae98 scaled to 0-1023 2012-01-06 21:43:37 -08:00
Jason Short 058a3275c3 Revved to R7 2012-01-06 10:22:53 -08:00
Jason Short 056a08d838 Forced Faildafe throttle mode to throttle Auto 2012-01-06 10:21:50 -08:00
Jason Short 57c3405658 Added check for armed motors in failsafe 2012-01-06 10:21:23 -08:00
Jason Short a640311f58 Added Note 2012-01-06 10:20:59 -08:00
Jason Short e908390c64 Made RTL go up 10m for failsafe 2012-01-06 10:20:48 -08:00
Jason Short d430c847fa Changed default throttle type for failsafe to avoid checking
changed timer to 20 seconds.
2012-01-06 10:20:31 -08:00
Jason Short de912b5054 Auto_land update 2012-01-05 21:57:34 -08:00
Jason Short beac2930c9 Added auto_land to RTL 2012-01-05 21:15:12 -08:00
Jason Short 9d9bef37a8 Clears Auto_land timer 2012-01-05 21:15:12 -08:00
Jason Short a8af509517 timer set to unsigned 2012-01-04 17:31:20 -08:00
Andrew Tridgell 600a5680f8 ACM: reset all I terms on gyro calibration 2012-01-05 10:15:14 +11:00
Andrew Tridgell a6808162d6 ACM: fixed a warning
comment out some unused debug code
2012-01-05 10:14:53 +11:00
Andrew Tridgell 734b0a02be ACM: fixed a alt hold bug
== instead of =
2012-01-05 10:14:30 +11:00
Andrew Tridgell 3c965ff1a2 ACM: fixed a signed/unsigned warning 2012-01-05 10:14:12 +11:00
Andrew Tridgell 9ee3431928 ACM-simple: don't use uninitialised simple trig values 2012-01-05 10:13:36 +11:00
Jason Short 8341a080ce Disabled stable mode wind comp by default for release 2012-01-04 09:28:38 -08:00
Jason Short 5aa0861ec2 Added Xplane output option 2012-01-04 09:28:38 -08:00
Jason Short 6b9d35cc34 Added home offset for altitude 2012-01-04 09:28:38 -08:00
Jason Short f74e265bb9 Made landing disarm the motors 2012-01-04 09:28:38 -08:00
Jason Short 3ac37c09a9 Upped Revision 2012-01-04 09:28:38 -08:00
Jason Short a70fdc58a1 Cleaned up and documented each global vavriable
Added Wind compensation for Stability
Acro mode fixes
2012-01-04 09:28:37 -08:00
Jason Short 123ce533bb Added precalc for wind compensation when entering Stabilze mode 2012-01-04 09:28:37 -08:00
Jason Short bf8e3975ec Added Wind compensation for Stabilize
moved speed calc to it's own function
decreased acceleration from WPs
2012-01-04 09:28:37 -08:00
Jason Short 6b3094e053 removed PM test field 1 - not needed 2012-01-04 09:28:37 -08:00
Jason Short 7858976407 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short 22c3853020 removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short e5994c578a removed unused vars 2012-01-04 09:28:37 -08:00
Jason Short 3d7f3f6b77 removed unused var 2012-01-04 09:28:37 -08:00
Jason Short 8d63af2a89 removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short a1c3ce88a0 calc_wind_compensation called when exiting AP modes
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
2012-01-04 09:28:37 -08:00
Jason Short e6887aa3ec added Reset_Rate_I function
Removed I term from Throttle rate calc
Added some basic constrains to Acro
2012-01-04 09:28:37 -08:00
Jason Short dd4b4c723a removed airspeed 2012-01-04 09:28:37 -08:00
Jason Short 7bef298a46 cleanup - removed unused functions, made pressure reading Float to avoid extra cast 2012-01-04 09:28:36 -08:00
Jason Short d7f4328441 cosmetic 2012-01-04 09:28:36 -08:00
Jason Short 1883d0c1a8 Added takeoff state and ground state variable 2012-01-04 09:28:36 -08:00
Jason Short c629795050 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short 801b3a8e8f removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short fcd18d5538 Removed unused options 2012-01-04 09:28:36 -08:00
Jason Short 525ac4df88 Cosmetic 2012-01-04 09:28:36 -08:00
Jason Short c450cc4e92 removed unused Airspeed config 2012-01-04 09:28:36 -08:00
Jason Short 4a50e08ac1 change how Reset Nav params work - no longer clear I terms 2012-01-04 09:28:36 -08:00
Jason Short fe265b3040 Added JLN's landing patch, moved some variables local such as Jump counter 2012-01-04 09:28:36 -08:00
Jason Short 5de709ceea removed unused functions 2012-01-04 09:28:36 -08:00
Andrew Tridgell 54b91ce2f4 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell d6ccffc71b ACM: don't set defaults in APM_Config.h
defaults set here prevent Makefile overrides, which breaks autotest
for non-default frame types
2012-01-04 19:35:05 +11:00
Andrew Tridgell 645eac6f38 I2c: default to 5ms timeout, and faster bus speed
we will slow down the speed when we get a failure
2012-01-04 16:36:47 +11:00
Jason Short 24bddb1c47 Added more constraints around velocity 2011-12-31 10:59:59 -08:00
Jason Short 86e01fce17 Cosmetic 2011-12-31 10:54:31 -08:00
Jason Short bfd7608f4d Lowered Yaw to prevent overshoot based on feedback 2011-12-31 10:10:45 -08:00
Jason Short e8db2225dd upped to r5 2011-12-31 10:05:13 -08:00
Jason Short e17c8705ba Loiter I reset 2011-12-31 09:45:25 -08:00
Jason Short e9d41897df R4 2011-12-30 23:54:02 -08:00
Jason Short 1d636219f9 New Style WP navigation for high wind 2011-12-30 23:48:05 -08:00
Jason Short fc93a73ad7 no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short 170a646ecf removing I term clearance 2011-12-30 23:48:04 -08:00
Jason Short 4b2979743f no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short 62ca68cdbb Reverted to Crosstrack like in Arduplane, requires Degrees * 100 2011-12-30 23:48:04 -08:00
Jason Short 27d3564eab Sync with Arduplane 2011-12-30 23:48:04 -08:00
Jason Short f5ffa7bd7e Updated Configs based on field testing. 2011-12-30 23:48:04 -08:00
Jason Short e08b550f44 Added a default Yaw tracking setting
Added Nav_Bearing
2011-12-30 23:48:04 -08:00
Jason Short 09db32ee02 Added Nav_bearing, just like APlane
added fix for LOITER in missions so we don't Yaw in circles
2011-12-30 23:48:04 -08:00
Jason Short 758a5240f2 removed old loiter method option 2011-12-30 23:48:04 -08:00
Randy Mackay c39ebde9de ArduCopter - init_compass - fixed HIL build issue 2011-12-31 12:29:54 +09:00
Jason Short 57b2d17d8a updated rev 2011-12-29 23:02:41 -08:00
Jason Short 8fc73844ee Yaw Performance tweaks 2011-12-29 23:02:03 -08:00
Jason Short 4535bc4fd9 lowered to nav_lat and nav_lon int16
added a version that didn't have I term added to get a better indication of velocity estimation
2011-12-29 23:02:03 -08:00
Jason Short 89c705c8b9 removed loiter I from Reset Nav 2011-12-29 23:02:03 -08:00
Jason Short 723adffc48 updated Loiter gains 2011-12-29 23:02:03 -08:00
Jason Short 4bfa5def76 removed Rate_I from Loiter, lowing Rate_P from Loiter too. Too aggressive leads to rapid oscillations in air, and not around loiter position. 2011-12-29 23:02:03 -08:00
Jason Short 2f657ebdbf cosmetic 2011-12-29 23:02:03 -08:00
Jason Short aa2e474b80 Added 5 sec Takeoff Timer to clear i terms when lifting
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
2011-12-29 23:02:03 -08:00
Jason Short 8a1b9df325 Added Stabilize_D parameter 2011-12-29 23:02:02 -08:00
Jason Short ce990f3050 Upped Yaw speed to deal with performance complaints
Added new Stabilize D term default of .25
2011-12-29 23:02:02 -08:00
Jason Short 83d52899b0 Added second order, filtered derivative in stabilize. Works much better than the non-filtered one I used to have. 2011-12-29 23:02:02 -08:00
Jason Short e42d5cb4f9 Fixes for Smooth Loiter 2011-12-29 23:02:02 -08:00
Jason Short c4ad864ed0 Set Define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short 737feabc6c Fixed a 1280 only test 2011-12-29 23:02:02 -08:00
Jason Short f94727ed02 added define for Max throttle 2011-12-29 23:02:02 -08:00
Jason Short 200f7da103 Added Dampening term for tuning 2011-12-29 23:02:02 -08:00
Jason Short 80e1715b12 updated Loiter PIDs 2011-12-29 23:02:02 -08:00
Jason Short db0a7be233 Enable Magnetometer by default 2011-12-29 23:02:02 -08:00
Jason Short 3202f1cf64 Missing ; 2011-12-29 23:02:01 -08:00
Jason Short 9832d8eccb removed takeoff complete flag from missions, not used and would be useful elsewhere. 2011-12-29 23:02:01 -08:00
Jason Short 9f7aae5945 removed unused function
Simplified the baro init filter
2011-12-29 23:02:01 -08:00
Randy Mackay ff66a3417c OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell 1cc38b0701 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell c27277c7f1 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell 8df91ea885 ACM: enable compass by default on APM2 2011-12-28 20:30:35 +11:00
Andrew Tridgell ef1d8eaeac ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Jason Short a8070d86df Fix for 11 channels of motors. 2011-12-26 14:39:01 -08:00
Andrew Tridgell 0f39336801 ACM: use LED_OFF/LED_ON instead of LOW/HIGH 2011-12-26 19:32:53 +11:00
Andrew Tridgell 7520315475 ACM: fixed HIL build again 2011-12-26 19:17:11 +11:00
Andrew Tridgell cb48bfd054 ACM-log: use DataFlash.df_NumLogs
this fixes the flash size on APM2
2011-12-26 19:17:11 +11:00
Randy Mackay 85167be181 TradHeli - modified the default collective min/max values to restrict movement to about half the full range. 2011-12-26 16:59:01 +09:00
Jason Short a4e00f7459 Tweaks to fix Loiter
Changed save location to int32
added some filtering and smoothing
2011-12-25 15:44:49 -08:00
Randy Mackay c3ea1ca5dc AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell da87622a5f removed "Please run setup" loop from ArduCopter
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
2011-12-24 18:12:51 +11:00
Jason Short 9e6ea0b167 disabled some tests with warnings 2011-12-23 18:54:38 -08:00
Jason Short 359d186798 added define for optflow 2011-12-23 18:45:01 -08:00
Jason Short bf29f09107 Getting rid of Simple Logging 2011-12-23 18:44:30 -08:00
Jason Short c9a30ccf1f Made WP radius 1 by default 2011-12-23 15:01:53 -08:00
Jason Short f2d6708058 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short a40a026220 added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Jason Short da903d2c3e moved some defines around 2011-12-23 14:46:32 -08:00
Jason Short c8ca841bd7 Fixed resolution issue with Xtrack
Added stub for loiter based on estimation
integrated fix for tracking GPS at slow speeds for loiter
2011-12-23 14:46:32 -08:00
Jason Short ce11f48809 This is the test to deal with big props with lots of inertia. We use a low pass filter on positive acceleration. 2011-12-23 14:46:32 -08:00
Jason Short fa2fa37f3b initing z dampener at arming 2011-12-23 14:46:08 -08:00
Jason Short 8aa6429b1e Too complicated 2011-12-23 14:46:08 -08:00
Jason Short 778c9cd1db added back in the Disabled log - gave up on Log Simple idea 2011-12-23 14:45:56 -08:00
Jason Short 7963a73816 used for testing 2011-12-23 14:42:50 -08:00
Jason Short f892e0b00d increased crosstrack thanks to float math fix
decreased loiter iterm, decreased throttle iterm based on simulator runs
2011-12-23 14:42:50 -08:00
Jason Short 7820d96f4c No longer blocking before initing home 2011-12-23 14:42:50 -08:00
Jason Short dc2103d67f the second accel test is just for fun.
Filtered output for Nav_throttle
2011-12-23 14:42:50 -08:00
Jason Short 6c5f41fe58 Begin to better integrate OptFlow, added necessary globals for Loiter estimation 2011-12-23 14:42:50 -08:00
Jason Short 885548e693 removed some unneeded HIL #defines 2011-12-23 14:42:49 -08:00
Pat Hickey 343228c8cc Log_simple uses identical implementation of do_erase_logs.
* fix build1280.ArduCopter
2011-12-22 13:31:28 -08:00
Pat Hickey 74530de4bb ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
2011-12-19 21:04:51 -08:00
Randy Mackay 73ff5138c6 Arducopter - added "//#define APM2_BETA_HARDWARE" to AP_Config.h for developer's who received early version of the board with the old barometer 2011-12-19 22:57:00 +09:00
Jani Hirvinen 9d7eb9cd1a config settings for jD motors 2011-12-19 09:29:05 +07:00
Jason Short a98a0b636a Hexa stability patch bug fix by borna.segulin 2011-12-18 16:38:07 -08:00
Jason Short 2f5da31a05 change Alpha name 2011-12-18 16:38:07 -08:00
Andrew Tridgell 1807585b98 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short 35f0d31b9d Sync logging 2011-12-16 22:02:41 -08:00
Jason Short ed818e4ccf Cleanup
removed Iterm experiment - no noticeable effect in actual flight
2011-12-16 20:47:23 -08:00
Andrew Tridgell 4bbd5392ef removed AperiodicProcess code
this code was never being used, and was more complex than it was
worth.
2011-12-17 07:29:09 +11:00
Jason Short 027b710816 renamed super simple, added framework for auto calc of throttle cruise 2011-12-15 20:51:41 -08:00
Jason Short 2b5c039eae turned off iterm for traverse 2011-12-15 20:51:41 -08:00
Jason Short b484fdab05 added some more throttle imax range
renamed Super Simple
2011-12-15 20:51:41 -08:00
Jason Short fa908795d9 renamed super simple 2011-12-15 20:51:41 -08:00
Jason Short 6a55fe18f6 added altitude to circle mission 2011-12-15 20:51:40 -08:00
Jason Short 4b52b61563 Allows user to specify just an altitude for Circle Mode 2011-12-15 20:51:40 -08:00
Jason Short 05e921f5d0 More power to descend 2011-12-15 20:51:40 -08:00
Jason Short 958693ee5e Addition of nav mode that tries to maintain level 2011-12-14 22:08:42 -08:00
Jason Short b4aafcce05 dupe of landing logic for scripting 2011-12-14 22:08:41 -08:00
Jason Short 96ce429537 made the last step of landing stop navigating so we can drop straight down. 2011-12-14 22:08:41 -08:00
Jason Short 66c974a949 Added failsafe check 2011-12-14 22:08:41 -08:00
Jason Short c7da9c63f1 updated Loiter control to provide an alternative to GPS rate control for users with circling issues. Works in SIM, needs flight testing 2011-12-14 22:08:41 -08:00
Jason Short d5666f287c added loiter control to reset nav 2011-12-14 22:08:41 -08:00
Jason Short 2a7f981fb0 added failsafe check,
enable loiter repositioning
2011-12-14 22:08:41 -08:00
Doug Weibel 737447c8cf Change logging to default on for 2560 2011-12-13 20:53:44 -07:00
Doug Weibel 2687f1c77d Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Michael Oborne be9a741c88 add method of detecting if motors are armed 2011-12-14 06:18:29 +08:00
Randy Mackay 68d1fa6ec7 Arducopter - Attitude.pde - fixed small bug in pitch stabilise 2011-12-13 22:10:51 +09:00
Andrew Tridgell c007fb49b8 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 4e4a4a685c fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Jason Short 29788b98bd Adjustments for High Wind enviroments 2011-12-12 17:47:45 -08:00
Jason Short 424a11d269 Stability patch2 - Jose style. 2011-12-12 17:47:45 -08:00
Jason Short 6b1bedc381 Gain updates 2011-12-12 17:47:45 -08:00
Jason Short a386ea5e06 Added a simplified Log that is just GPS for my 1280 board 2011-12-12 17:47:45 -08:00
Jason Short 6bac318def Added param option for Simple mode reset 2011-12-12 17:47:45 -08:00
Jason Short 3edd471983 Upped the max pitch to deal with wind - based on T3 testing 2011-12-12 10:10:33 -08:00
Jason Short e1146b6df6 Just upped the nav_imax value 2011-12-12 10:10:33 -08:00
Andrew Tridgell 6857d9af14 fixed LOGGING_ENABLED default on ArduCopter 2011-12-12 23:40:43 +11:00
Andrew Tridgell e184d1dfe4 quad: fixed the comments on the + motors 2011-12-12 21:01:58 +11:00
Andrew Tridgell ae1ec05dd4 fixed barometer detection on APM2 2011-12-12 15:45:36 +11:00
Andrew Tridgell 483754cb70 fixed == that should be = 2011-12-12 15:19:50 +11:00
Andrew Tridgell cadc5bde1d fixed hil ArduCopter build 2011-12-12 15:14:55 +11:00
Andrew Tridgell dd4498d113 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Andrew Tridgell 65ed8cc2c3 added sitl build target 2011-12-12 15:14:55 +11:00
Andrew Tridgell faf58a355b airspeed: use floating point values and better averaging in zero_airspeed()
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
2011-12-12 15:14:55 +11:00
Pat Hickey 067724b4f1 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey 6710cf5c5a Wire and SPI Init: move to sketch system.pde from libraries
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
2011-12-11 15:21:10 -08:00
Pat Hickey 67436d7ff2 ArduCopter: Get barometer data in terms of AP_Baro interface
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
2011-12-11 15:21:10 -08:00
Pat Hickey bd00b629e7 ArduCopter Init: different call to barometer.init based on CONFIG_BARO
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
2011-12-11 15:21:10 -08:00
Pat Hickey 82b8f4d7b7 ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey 5fd8fea957 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
2011-12-11 15:21:09 -08:00
Pat Hickey 0b0922d04c ArduCopter: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey 698a231dd6 ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes. 2011-12-11 15:21:09 -08:00
Pat Hickey 05b6f4be81 ArduCopter CLI: Add imu.init before imu.init_accel for "level"
* Depending on when you entered the CLI, the imu might not be
  initialized yet, and init_accel would hang.
2011-12-11 15:19:46 -08:00
Pat Hickey 273492bc66 ArduCopter: Revert "Switched to Gyro only startup"
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.

I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.

It is no longer valid to call IMU::init_gyro() before IMU::init().
2011-12-11 14:50:02 -08:00
Jason Short 4efbae4a1c Hack to prevent fly aways
Cleanup to remove SIMPLE mode switch note
2011-12-11 12:01:06 -08:00
Jason Short c01361a79d removed CLI switch by default, decreased Nav I 2011-12-11 09:53:44 -08:00
Jason Short b442a1b23c added debug prints, broke out Angle val to debug 2011-12-11 09:53:44 -08:00
Jason Short 4ff5d5016a fix for navigation scaleLongUp 2011-12-11 09:53:44 -08:00
Randy Mackay 26705111e1 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay 62a7b19600 Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short a0cef1cc88 made it so nav is called in Simple mode 2011-12-10 23:31:37 -08:00
Jason Short 995727383b Adjust Simple mode on the fly. 2011-12-10 23:29:29 -08:00
Jason Short 37f1a574fa Set Nav_WP as home 2011-12-10 23:26:10 -08:00
Jason Short 64cb2a54cf eased up on the i term blocker 2011-12-10 23:25:52 -08:00
Jason Short 9c3475f168 Made landing slower 2011-12-10 19:33:19 -08:00
Jason Short 2b06a54fc5 Allows you to clear the stored mission when in Auto 2011-12-10 19:32:46 -08:00
Jason Short 6228dfb37c Will add a landing command to last WP if we are on the ground. 2011-12-10 19:29:42 -08:00
Jason Short 146d52d650 Switched to Gyro only startup 2011-12-10 15:13:20 -08:00
Jason Short 2defbe818f rework of inflight trim. 2011-12-10 15:05:53 -08:00
Jason Short 37f3875968 Removed Instant PWM from disarmed output 2011-12-10 10:33:25 -08:00
Jason Short 34213e745c Ground course saved as long for SIM compat 2011-12-10 10:19:20 -08:00
Jason Short f444aac706 Added SIMPLE mode reset outside of bounding box of 10M, will do more testing before enabling. 2011-12-10 10:19:20 -08:00
Jason Short 7c1a975a71 Made Baro_alt int32_t
Added home to copter bearing, home to copter distance
Added Land mode
2011-12-10 10:19:20 -08:00
Jason Short a9e82e3fbd Debugging some motor issues 2011-12-10 10:19:20 -08:00