| .. |
|
ACNS-CM4Pilot
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
ACNS-F405AIO
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
AeroFox-Airspeed
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
AeroFox-Airspeed-DLVR
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
AeroFox-GNSS_F9P
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
AeroFox-PMU
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
airbotf4
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
AIRLink
|
|
|
|
Airvolute-DCS2
|
|
|
|
AnyleafH7
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
Aocoda-RC-H743Dual
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
AR-F407SmartBat
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
ARK_CANNODE
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
ARK_GPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
ARK_RTK_GPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
ARKV6X
|
hwdef: ARKV6X add USART6 to serial list
|
2024-01-01 13:17:06 +11:00 |
|
AtomRCF405NAVI
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
BeastF7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
BeastF7v2
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
BeastH7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
BeastH7v2
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
BETAFPV-F405
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
|
BirdCANdy
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
BlitzF745AIO
|
HWDEF: allow all build targets for non-integrated boarda
|
2024-04-02 10:17:21 +11:00 |
|
BotBloxSwitch
|
hwdef: require bootloader for BotBloxSwitch
|
2024-04-10 09:59:14 +10:00 |
|
C-RTK2-HP
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CarbonixF405
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CarbonixL496
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CBU-H7-Stamp
|
AP_HAL_ChibiOS: CB Unmanned Stamp H743
|
2024-04-09 09:26:40 +10:00 |
|
common
|
HAL_ChibiOS: fixed a cache corruption issue on H7
|
2024-03-16 21:57:33 +11:00 |
|
crazyflie2
|
hwdef: Make Crazyflie2 board only autobuild for Copter
|
2024-03-15 21:11:40 +11:00 |
|
CSKY405
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
CUAV_GPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CUAV-Nora
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
CUAV-Nora-bdshot
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
CUAV-X7
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
CUAV-X7-bdshot
|
|
|
|
CUAVv5
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
CUAVv5-bdshot
|
|
|
|
CUAVv5Nano
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
CUAVv5Nano-bdshot
|
|
|
|
CubeBlack
|
AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu
|
2023-08-15 06:53:48 +10:00 |
|
CubeBlack-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CubeBlack+
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
|
CubeGreen-solo
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
CubeOrange
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
CubeOrange-bdshot
|
Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory
|
2024-01-17 18:28:48 +11:00 |
|
CubeOrange-joey
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
CubeOrange-ODID
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
CubeOrange-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CubeOrange-periph-heavy
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CubeOrange-SimOnHardWare
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
CubeOrangePlus
|
|
|
|
CubeOrangePlus-bdshot
|
|
|
|
CubeOrangePlus-SimOnHardWare
|
|
|
|
CubePilot-CANMod
|
hwdef: remove stray HAL_BUILD_AP_PERIPH defines
|
2024-04-03 18:36:29 +11:00 |
|
CubePilot-PPPGW
|
Chibios: CubeRed - change NET_ENABLED to NET_ENABLE
|
2024-03-20 19:08:31 +11:00 |
|
CubePurple
|
AP_HAL_ChibiOS: dshot iofirmware for Durandal, Pixhawk6C, CubePurple and CubeYellow
|
2023-08-15 06:53:48 +10:00 |
|
CubeRedPrimary
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
CubeRedPrimary-PPPGW
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
CubeRedSecondary
|
AP_HAL_ChibiOS: CubeRedSecondary IMU orientation fix
|
2024-03-13 18:51:18 +11:00 |
|
CubeSolo
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
CubeYellow
|
|
|
|
CubeYellow-bdshot
|
AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7
|
2021-03-03 18:02:26 +11:00 |
|
DevEBoxH7v2
|
hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults
|
2023-07-19 17:25:18 +09:00 |
|
DrotekP3Pro
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
Durandal
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
Durandal-bdshot
|
|
|
|
f103-ADSB
|
|
|
|
f103-Airspeed
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
f103-GPS
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
f103-HWESC
|
|
|
|
f103-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
f103-QiotekPeriph
|
hwdef: make f103-QiotekPeriph a single compass
|
2023-11-08 18:34:41 +11:00 |
|
f103-RangeFinder
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
f103-Trigger
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
f303-GPS
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
f303-HWESC
|
|
|
|
f303-M10025
|
|
|
|
f303-M10070
|
|
|
|
f303-MatekGPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
f303-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
f303-PWM
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
f303-TempSensor
|
|
|
|
f303-Universal
|
|
|
|
f405-MatekAirspeed
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
f405-MatekGPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
F4BY
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
F35Lightning
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
FlyingMoonF407
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
FlyingMoonF427
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
FlyingMoonH743
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
FlywooF405Pro
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
FlywooF405S-AIO
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
|
FlywooF745
|
hwdef: remove save_some_flash.inc
|
2024-03-24 20:15:53 +11:00 |
|
FlywooF745Nano
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
fmuv2
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
|
fmuv3
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
fmuv3-bdshot
|
|
|
|
fmuv5
|
|
|
|
FoxeerF405v2
|
AP_HAL_ChibiOS: fixup FoxeerF405v2 build
|
2024-04-06 10:13:46 +11:00 |
|
FoxeerH743v1
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
FreeflyRTK
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
G4-ESC
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
H757I_EVAL
|
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
H757I_EVAL_intf
|
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
HEEWING-F405
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
HEEWING-F405v2
|
|
|
|
Here4AP
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Here4FC
|
|
|
|
Hitec-Airspeed
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
HitecMosaic
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
HolybroG4_Compass
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
HolybroG4_GPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
HolybroGPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
include
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
iomcu
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
iomcu_f103_8MHz
|
|
|
|
iomcu-dshot
|
|
|
|
iomcu-f103
|
AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators
|
2023-08-15 06:53:48 +10:00 |
|
iomcu-f103-dshot
|
|
|
|
JFB100
|
AP_HAL_ChibiOS/hwdef: add LED_SAFETY for JFB100 board definition
|
2024-03-06 18:52:35 +11:00 |
|
JFB110
|
AP_HAL_ChibiOS/hwdef: update JFB110 board definition
|
2024-02-28 15:55:29 +09:00 |
|
JHEM_JHEF405
|
hwdef: adding IMU lines for older version of board
|
2024-04-08 22:30:57 +10:00 |
|
JHEMCU-GSF405A
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
|
JHEMCU-GSF405A-RX2
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
|
KakuteF4
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
|
KakuteF4Mini
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
KakuteF7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
KakuteF7-bdshot
|
|
|
|
KakuteF7Mini
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
KakuteH7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
KakuteH7-bdshot
|
AP_HAL_ChibiOS: normalize SerialManagers ports defaults to allow inclusion in hwdefs
|
2023-05-11 18:45:53 +10:00 |
|
KakuteH7-Wing
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
KakuteH7Mini
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
KakuteH7Mini-Nand
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
KakuteH7v2
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
kha_eth
|
hwdef: remove redundant defines from hwdefs
|
2024-04-09 09:32:15 +10:00 |
|
luminousbee4
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
luminousbee5
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
MambaF405-2022
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
|
MambaF405US-I2C
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
|
MambaF405v2
|
|
|
|
MambaH743v4
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
MatekF405
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
MatekF405-bdshot
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
MatekF405-CAN
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
MatekF405-STD
|
|
|
|
MatekF405-TE
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
MatekF405-TE-bdshot
|
|
|
|
MatekF405-Wing
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
MatekF405-Wing-bdshot
|
|
|
|
MatekF765-SE
|
hwdef:add bdshot to MatekF765-SE
|
2023-07-18 10:26:44 +10:00 |
|
MatekF765-Wing
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
MatekF765-Wing-bdshot
|
hwdef: correct double-definitions of DEFAULT_NTF_LED_TYPES
|
2023-05-07 20:13:44 +10:00 |
|
MatekH7A3
|
hwdef: add MatekH7A3 readme.md
|
2024-04-11 10:17:17 +10:00 |
|
MatekH743
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
MatekH743-bdshot
|
hwdef: DMA is off on I2C on F7 and H7 by default
|
2023-04-25 14:19:09 +10:00 |
|
MatekH743-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
MatekL431
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
MatekL431-ADSB
|
|
|
|
MatekL431-Airspeed
|
|
|
|
MatekL431-BattMon
|
hwdef: re-enable RCIN thread on some builds/boards
|
2024-04-03 18:36:29 +11:00 |
|
MatekL431-bdshot
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
|
MatekL431-DShot
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
|
MatekL431-EFI
|
|
|
|
MatekL431-GPS
|
hwdef: re-enable RCIN thread on some builds/boards
|
2024-04-03 18:36:29 +11:00 |
|
MatekL431-HWTelem
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
MatekL431-MagHiRes
|
hwdef: added MatekL431-HiRes build
|
2024-03-16 20:10:35 +11:00 |
|
MatekL431-Periph
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
|
MatekL431-Proximity
|
|
|
|
MatekL431-Rangefinder
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
|
MatekL431-RC
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
|
MatekL431-Serial
|
|
|
|
MazzyStarDrone
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
MicoAir405v2
|
hwdef: correct hwdef for MicoAir405v2
|
2024-04-10 21:55:01 +10:00 |
|
mindpx-v2
|
|
|
|
mini-pix
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
modalai_fc-v1
|
|
|
|
mRo-M10095
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
mRoCANPWM-M10126
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
mRoControlZeroClassic
|
mRo Control Zero Classic: Added ADC input for servo rail
|
2024-04-10 19:01:51 +10:00 |
|
mRoControlZeroF7
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
mRoControlZeroH7
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
mRoControlZeroH7-bdshot
|
|
|
|
mRoControlZeroOEMH7
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
mRoCZeroOEMH7-bdshot
|
|
|
|
mRoKitCANrevC
|
AP_HAL_ChibiOS: mRo KitCAN revC board fix
|
2024-02-01 11:43:35 +11:00 |
|
mRoNexus
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
mRoPixracerPro
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
mRoPixracerPro-bdshot
|
|
|
|
mRoX21
|
|
|
|
mRoX21-777
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
Nucleo-G491
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Nucleo-L476
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Nucleo-L496
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
NucleoH743
|
|
|
|
NucleoH755
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
omnibusf4
|
|
|
|
omnibusf4pro
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
omnibusf4pro-bdshot
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
omnibusf4pro-one
|
|
|
|
omnibusf4v6
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
OMNIBUSF7V2
|
hwdef: do not remove OSD in common minimized boards
|
2023-09-06 20:32:06 +10:00 |
|
OmnibusNanoV6
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
OmnibusNanoV6-bdshot
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
OrqaF405Pro
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
PH4-mini
|
hwdef: Redefine DMA priority PH4-mini
|
2021-12-27 11:25:51 +11:00 |
|
PH4-mini-bdshot
|
AP_HAL_ChibiOS: add BDShot for Holybro PH4-mini
|
2022-07-19 11:15:56 +10:00 |
|
Pix32v5
|
|
|
|
PixC4-Jetson
|
|
|
|
PixFlamingo
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
PixFlamingo-F767
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
Pixhawk1
|
|
|
|
Pixhawk1-1M
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
Pixhawk1-1M-bdshot
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
|
Pixhawk1-bdshot
|
AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot
|
2024-02-27 12:06:57 +11:00 |
|
Pixhawk4
|
AP_HAL_ChibiOS: fix auxiliary typo
|
2022-05-02 10:55:08 +10:00 |
|
Pixhawk4-bdshot
|
AP_HAL_ChibiOS: correct and compact Pixhawk4-bdshot build
|
2021-09-08 17:09:49 +10:00 |
|
Pixhawk5X
|
AP_HAL_ChibiOS: add iomcu dshot for Pixhawk1, Pixhawk5X and fmuv5
|
2023-08-15 06:53:48 +10:00 |
|
Pixhawk6C
|
|
|
|
Pixhawk6C-bdshot
|
|
|
|
Pixhawk6X
|
hwdef: added support for Holybro6X-45686
|
2024-01-23 11:49:14 +11:00 |
|
Pixhawk6X-bdshot
|
|
|
|
Pixhawk6X-ODID
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
|
Pixhawk6X-PPPGW
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
PixPilot-C3
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
PixPilot-V3
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
PixPilot-V6
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
Pixracer
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
Pixracer-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
|
Pixracer-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
PixSurveyA1
|
|
|
|
PixSurveyA1-IND
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
PixSurveyA2
|
|
|
|
QioTekAdeptF407
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
QioTekZealotF427
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
QioTekZealotH743
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
QioTekZealotH743-bdshot
|
|
|
|
R9Pilot
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
RadiolinkPIX6
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
RADIX2HD
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
ReaperF745
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
revo-mini
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
revo-mini-bdshot
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
|
revo-mini-i2c
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
revo-mini-i2c-bdshot
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
revo-mini-sd
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
|
rFCU
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
rGNSS
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
scripts
|
AP_HAL_ChibiOS: FoxeerF405v2
|
2024-04-03 18:50:52 +11:00 |
|
SDMODELH7V1
|
hwdef: update SDH7V1 readme
|
2023-11-28 11:47:32 +11:00 |
|
Sierra-F9P
|
hwdef: remove redundant defines from hwdefs
|
2024-04-09 09:32:15 +10:00 |
|
Sierra-F405
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-F412
|
hwdef: remove redundant defines from hwdefs
|
2024-04-09 09:32:15 +10:00 |
|
Sierra-L431
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-PrecisionPoint
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-TrueNavIC
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-TrueNavPro
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-TrueNavPro-G4
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-TrueNorth
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Sierra-TrueSpeed
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
SIYI_N7
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
SkystarsH7HD
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
SkystarsH7HD-bdshot
|
AP_HAL_ChibiOS: fix incorrect removal of HAL_I2C_INTERNAL_MASK undef in SkystarsH743HD
|
2023-08-12 14:00:11 +10:00 |
|
skyviper-f412-rev1
|
hwdef: tidy AP_Radio includes
|
2024-02-05 09:26:14 +11:00 |
|
skyviper-journey
|
hwdef: make a skyviper.inc, use it on skyviper-journey
|
2024-03-26 11:07:42 +11:00 |
|
skyviper-v2450
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
sparky2
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
speedybeef4
|
|
|
|
speedybeef4v3
|
hwdef: fix speedybeef4v3 build
|
2023-10-26 18:15:30 +11:00 |
|
speedybeef4v4
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
SpeedyBeeF405Mini
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
SpeedyBeeF405WING
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
SPRacingH7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
|
SPRacingH7RF
|
AP_HAL_ChibiOS: allow H7RF to build
|
2024-04-05 10:23:50 +11:00 |
|
STM32CubeConf
|
|
|
|
SuccexF4
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
|
sw-boom-f407
|
AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts
|
2024-04-05 10:53:38 +11:00 |
|
sw-nav-f405
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
sw-spar-f407
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Swan-K1
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
|
TBS-Colibri-F7
|
HAL_ChibiOS: removed boilerplate lines from bootloaders
|
2021-10-26 15:56:53 +11:00 |
|
thepeach-k1
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
thepeach-r1
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
|
TMotorH743
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
VRBrain-v51
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
VRBrain-v52
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
VRBrain-v54
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
VRCore-v10
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
VRUBrain-v51
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
YJUAV_A6
|
hwdef: the RM3100 should run at max 1MHz on SPI bus
|
2024-04-10 21:40:51 +10:00 |
|
YJUAV_A6SE
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
YJUAV_A6SE_H743
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
YJUAV_A6Ultra
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
|
ZubaxGNSS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
