.. |
3DRControlZeroG
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
ACNS-CM4Pilot
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
ACNS-F405AIO
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
AEROFOX-H7
|
hwdef: Add AEROFOX H7
|
2024-12-07 18:10:09 +11:00 |
AET-H743-Basic
|
AP_HAL_ChibiOS: Add hwdef files for AET-H743-Basic
|
2024-11-20 23:55:35 +11:00 |
AIRLink
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
AR-F407SmartBat
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
ARKV6X
|
hwdef: ARKV6x: fix RC input
|
2024-09-06 08:45:57 +10:00 |
ARK_CANNODE
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
ARK_GPS
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
ARK_RTK_GPS
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
AeroFox-Airspeed
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
AeroFox-Airspeed-DLVR
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
AeroFox-GNSS_F9P
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
AeroFox-PMU
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Airvolute-DCS2
|
AP_HAL_ChibiOS: add hwdef files for Airvolute DCS2 onboard FMU
|
2023-12-12 11:09:09 +11:00 |
AnyleafH7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Aocoda-RC-H743Dual
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
AtomRCF405NAVI
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
BETAFPV-F405
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
BeastF7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
BeastF7v2
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
BeastH7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
BeastH7v2
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
BirdCANdy
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
BlitzF745
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
BlitzF745AIO
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
BlitzH743Pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
BlitzMiniF745
|
AP_HAL_ChibiOS: iFlight BLITZ Mini F745
|
2024-04-17 17:34:10 +10:00 |
BlitzWingH743
|
AP_HAL_ChibiOS: BLITZ Wing H743
|
2024-05-14 09:35:51 +10:00 |
BotBloxDroneNet
|
hwdef: default CAN MCAST enabled for PPPGW builds
|
2024-09-17 10:02:29 +10:00 |
C-RTK2-HP
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
CBU-H7-Stamp
|
AP_HAL_ChibiOS: Update CBU-Stamp Baro Type
|
2024-11-26 09:42:01 +11:00 |
CSKY405
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
CUAV-7-Nano
|
HAL_ChibiOS: change battery scale for CUAV-7-Nano flight controller
|
2024-09-02 12:23:08 +10:00 |
CUAV-Nora
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAV-Nora-bdshot
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
CUAV-Pixhack-v3
|
hwdef: add named Pixhack-v3 board
|
2024-08-06 10:29:05 +10:00 |
CUAV-X7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAV-X7-bdshot
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
CUAV_GPS
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
CUAVv5
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAVv5-bdshot
|
…
|
|
CUAVv5Nano
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAVv5Nano-bdshot
|
…
|
|
CarbonixF405
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
CarbonixL496
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
CubeBlack
|
AP_HAL_ChibiOS: add support for driving profileds via safety pins
|
2024-11-20 19:12:44 +11:00 |
CubeBlack+
|
AP_HAL_ChibiOS: add support for driving profileds via safety pins
|
2024-11-20 19:12:44 +11:00 |
CubeBlack-periph
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
CubeGreen-solo
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
CubeNode
|
AP_HAL_ChibiOS: change name CubePilot-CANMod and -PPPGW to CubeNode
|
2024-10-23 06:46:22 +09:00 |
CubeNode-ETH
|
AP_HAL_ChibiOS: CubeNode ETH add HAL_PERIPH_SHOW_SERIAL_MANAGER_PARAMS
|
2024-11-27 11:53:25 +11:00 |
CubeOrange
|
AP_HAL_ChibiOS: add support for driving profileds via safety pins
|
2024-11-20 19:12:44 +11:00 |
CubeOrange-ODID
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-SimOnHardWare
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-bdshot
|
Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory
|
2024-01-17 18:28:48 +11:00 |
CubeOrange-joey
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-periph
|
AP_HAL_ChibiOS: properly enable periph IMU on CubeOrange-periph and heavy
|
2024-10-23 06:46:22 +09:00 |
CubeOrange-periph-heavy
|
AP_HAL_ChibiOS: properly enable periph IMU on CubeOrange-periph and heavy
|
2024-10-23 06:46:22 +09:00 |
CubeOrangePlus
|
AP_HAL_ChibiOS: add support for PPP on CubeOrangePlus
|
2024-06-27 10:11:14 +10:00 |
CubeOrangePlus-SimOnHardWare
|
hwdef: Cite CubeOrange-SimOnHW as the default file
|
2023-10-14 17:55:56 +11:00 |
CubeOrangePlus-bdshot
|
Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory
|
2024-01-17 18:28:48 +11:00 |
CubePurple
|
…
|
|
CubeRedPrimary
|
AP_HAL_ChibiOS: CubeRedPrimary: update config for icm45686
|
2024-11-17 20:39:34 +11:00 |
CubeRedPrimary-PPPGW
|
hwdef: default CAN MCAST enabled for PPPGW builds
|
2024-09-17 10:02:29 +10:00 |
CubeRedSecondary
|
AP_HAL_ChibiOS: add support for PPP between CubeRed Primary and Secondary
|
2024-07-25 09:37:16 +10:00 |
CubeSolo
|
AP_HAL_Chibios: default to MavLinkV1 on CubeSolo
|
2024-09-04 19:13:05 +10:00 |
CubeYellow
|
AP_HAL_ChibiOS: add support for driving profileds via safety pins
|
2024-11-20 19:12:44 +11:00 |
CubeYellow-bdshot
|
…
|
|
DevEBoxH7v2
|
…
|
|
DrotekP3Pro
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
Durandal
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Durandal-bdshot
|
…
|
|
F4BY
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
F4BY_F427
|
hwdef: f4BY Flight Controller MCU upgrade
|
2024-11-22 12:05:59 +11:00 |
F35Lightning
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
FlyingMoonF407
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlyingMoonF427
|
hwdef: FlyingMoonF427: remove MAX7456
|
2024-07-26 20:10:38 +10:00 |
FlyingMoonH743
|
hwdef: FlyingMoonH743: remove MAX7456
|
2024-07-26 20:10:38 +10:00 |
FlywooF405HD-AIOv2
|
AP_HAL_ChibiOS:correct pin to be pulled high during boot
|
2024-06-01 10:23:52 +10:00 |
FlywooF405Pro
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
FlywooF405S-AIO
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
FlywooF745
|
hwdef: add DPS280 to baros present on FlyWooF745
|
2024-09-30 19:58:04 +10:00 |
FlywooF745Nano
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
FlywooH743Pro
|
AP_HAL_ChibiOS: Flywoo H743 Pro
|
2024-08-13 10:20:15 +10:00 |
FoxeerF405v2
|
AP_HAL_ChibiOS: support BMP280 on FoxeerF405v2
|
2024-11-14 20:10:22 +11:00 |
FoxeerH743v1
|
AP_HAL_ChibiOS: FoxeerH743v2
|
2024-11-12 11:12:23 +11:00 |
FreeflyRTK
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
G4-ESC
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
GEPRCF745BTHD
|
hwdef: GEPRCF745BTHD: remove parachute and bl-flashing support (flash overflow)
|
2024-10-09 08:24:12 +11:00 |
GEPRC_TAKER_H743
|
AP_HAL_ChibiOS: add GEPRC_TAKER_H743
|
2024-12-10 10:30:54 +11:00 |
H757I_EVAL
|
hwdef: H757_EVAL: make it not-AP_Periph
|
2024-07-09 12:00:52 +10:00 |
H757I_EVAL_intf
|
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
|
2024-04-03 18:36:29 +11:00 |
HEEWING-F405
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
HEEWING-F405v2
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
Here4AP
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
Here4FC
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Hitec-Airspeed
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
HitecMosaic
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
HolybroF4_PMU
|
AP_HAL_ChibiOS: Add a new target Holybro DroneCAN-pmu
|
2024-09-06 08:50:20 +10:00 |
HolybroG4_Airspeed
|
AP_HAL_ChibiOS: Add a new target HolybroG4 DroneCAN Airspeed
|
2024-08-22 08:56:22 +10:00 |
HolybroG4_Compass
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
HolybroG4_GPS
|
hwdef: enable IMU in HolybroG4_GPS
|
2024-12-10 09:29:37 +11:00 |
HolybroGPS
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
IFLIGHT_2RAW_H7
|
AP_HAL_ChibiOS: update logging docs for 2RAW H743
|
2024-07-26 10:39:38 +10:00 |
JFB100
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
JFB110
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
JHEMCU-GSF405A
|
hwdef: JHEMCU-GSF405A becomes minimize-fpv-osd
|
2024-09-25 17:12:44 +10:00 |
JHEMCU-GSF405A-RX2
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
JHEMCU-H743HD
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
JHEM_JHEF405
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
KakuteF4
|
hwdef: add SPA06 to Kakute hwdef
|
2024-11-22 15:11:40 +11:00 |
KakuteF4-Wing
|
AP_HAL_ChibiOS: KakuteF4-Wing
|
2024-08-07 17:34:34 +10:00 |
KakuteF4Mini
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
KakuteF7
|
hwdef: remove SMBus battery support from all minimize-fpv boards
|
2024-09-06 08:49:28 +10:00 |
KakuteF7-bdshot
|
…
|
|
KakuteF7Mini
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
KakuteH7
|
add bmi270 support to kakuteh7
|
2024-12-10 10:33:26 +11:00 |
KakuteH7-Wing
|
hwdef: add SPA06 to Kakute hwdef
|
2024-11-22 15:11:40 +11:00 |
KakuteH7-bdshot
|
…
|
|
KakuteH7Mini
|
hwdef: add SPA06 to Kakute hwdef
|
2024-11-22 15:11:40 +11:00 |
KakuteH7Mini-Nand
|
AP_Logger: rename class and hwdef related to w25nxx
|
2024-05-06 12:26:38 +10:00 |
KakuteH7v2
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
LongBowF405WING
|
hwdef: removed QAUTOTUNE disable
|
2024-11-27 14:07:38 +11:00 |
MFE_POS3_CAN
|
hwdef: added MFE_POS3_GPS
|
2024-11-19 12:25:08 +11:00 |
MFT-SEMA100
|
hwdef: -Os on MFT-SEMA-100 to avoid flash overflow
|
2024-09-25 23:44:05 +10:00 |
MUPilot
|
AP_HAL_ChibiOS:Mugin MUPilot
|
2024-11-05 08:16:34 +09:00 |
MambaF405-2022
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
MambaF405US-I2C
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MambaF405v2
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MambaH743v4
|
AP_HAL_ChibiOS: compile MambaH743v4 at -O2
|
2024-12-04 07:45:05 +11:00 |
MatekF405
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-CAN
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-STD
|
…
|
|
MatekF405-TE
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-TE-bdshot
|
…
|
|
MatekF405-Wing
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-Wing-bdshot
|
…
|
|
MatekF405-bdshot
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
MatekF765-SE
|
…
|
|
MatekF765-Wing
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF765-Wing-bdshot
|
…
|
|
MatekG474
|
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
|
2024-05-10 12:54:11 +10:00 |
MatekG474-DShot
|
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
|
2024-05-10 12:54:11 +10:00 |
MatekG474-Periph
|
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
|
2024-05-10 12:54:11 +10:00 |
MatekH7A3
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekH743-bdshot
|
…
|
|
MatekH743-periph
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
MatekL431
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
MatekL431-ADSB
|
hwdef: add MatekL431 ADSB Periph
|
2023-10-09 16:18:13 -07:00 |
MatekL431-APDTelem
|
hwdef: added MatekL431-APDTelem
|
2024-05-08 18:19:19 +10:00 |
MatekL431-Airspeed
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-BattMon
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
MatekL431-DShot
|
hwdef: enable relay support in MatekL431-DShot fw
|
2024-07-23 18:42:56 +10:00 |
MatekL431-EFI
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-GPS
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
MatekL431-HWTelem
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-MagHiRes
|
hwdef: added MatekL431-HiRes build
|
2024-03-16 20:10:35 +11:00 |
MatekL431-Periph
|
hwdef: remove non-ublox GPSes from MatekL431-Periph
|
2024-09-10 12:30:23 +10:00 |
MatekL431-Proximity
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-RC
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
MatekL431-Rangefinder
|
AP_HAL_ChibiOS: MatekL431-Rangefinder: Add 2nd rangefinder
|
2024-04-17 17:06:42 +10:00 |
MatekL431-Serial
|
hwdef: added MatekL431-Serial
|
2023-12-27 05:13:14 -07:00 |
MatekL431-bdshot
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
MazzyStarDrone
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
MicoAir405Mini
|
hwdef: Update hwdef for MicoAir405v2 and MicoAir405mini
|
2024-09-04 09:52:30 +10:00 |
MicoAir405v2
|
hwdef: Update hwdef for MicoAir405v2 and MicoAir405mini
|
2024-09-04 09:52:30 +10:00 |
MicoAir743
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
Nucleo-G491
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
Nucleo-L476
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Nucleo-L496
|
hwdef: switch CAN port definiton on Nucleo-496 hwdef
|
2024-09-26 08:31:50 +10:00 |
NucleoH743
|
…
|
|
NucleoH755
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
NxtPX4v2
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
OMNIBUSF7V2
|
hwdef: remove SMBus battery support from all minimize-fpv boards
|
2024-09-06 08:49:28 +10:00 |
OmnibusNanoV6
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
OmnibusNanoV6-bdshot
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
OrqaF405Pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PH4-mini
|
…
|
|
PH4-mini-bdshot
|
…
|
|
Pix32v5
|
…
|
|
PixC4-Jetson
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
PixFlamingo
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PixFlamingo-F767
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
PixPilot-C3
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
PixPilot-V3
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PixPilot-V6
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PixPilot-V6PRO
|
AP_HAL_ChibiOS:added new hardware PixPilot-V6PRO
|
2024-08-10 11:06:33 +10:00 |
PixSurveyA1
|
…
|
|
PixSurveyA1-IND
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
PixSurveyA2
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Pixhawk1
|
AP_HAL_ChibiOS: add iomcu dshot for Pixhawk1, Pixhawk5X and fmuv5
|
2023-08-15 06:53:48 +10:00 |
Pixhawk1-1M
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
Pixhawk1-1M-bdshot
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
Pixhawk1-bdshot
|
AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot
|
2024-02-27 12:06:57 +11:00 |
Pixhawk4
|
…
|
|
Pixhawk4-bdshot
|
…
|
|
Pixhawk5X
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Pixhawk6C
|
hwdef: enable flash-from-SD on Pixhawk6C
|
2024-09-04 19:08:46 +10:00 |
Pixhawk6C-bdshot
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
Pixhawk6X
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Pixhawk6X-ODID
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
Pixhawk6X-PPPGW
|
hwdef: default CAN MCAST enabled for PPPGW builds
|
2024-09-17 10:02:29 +10:00 |
Pixhawk6X-bdshot
|
…
|
|
Pixracer
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Pixracer-bdshot
|
…
|
|
Pixracer-periph
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
QioTekAdeptF407
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
QioTekZealotF427
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
QioTekZealotH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
QioTekZealotH743-bdshot
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
R9Pilot
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
RADIX2HD
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
RadiolinkPIX6
|
hwdef: RadioLinkPIX6 uses SPL06 driver
|
2024-09-11 18:27:47 +10:00 |
ReaperF745
|
hwdef: add mpu6000 to support ReaperF745 V4 FC
|
2024-09-06 21:19:32 +10:00 |
SDMODELH7V1
|
hwdef: update SDH7V1 readme
|
2023-11-28 11:47:32 +11:00 |
SDMODELH7V2
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
SIYI_N7
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
SPRacingH7
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
SPRacingH7RF
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
STM32CubeConf
|
AP_HAL_ChibiOS: Remove executable permissions
|
2023-09-08 17:09:26 +10:00 |
Sierra-F9P
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-F405
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-F412
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-L431
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-PrecisionPoint
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
Sierra-TrueNavIC
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-TrueNavPro
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-TrueNavPro-G4
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-TrueNorth
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
Sierra-TrueSpeed
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
SkySakuraH743
|
hwdef: SkySakura H743 fc Support
|
2024-11-08 10:50:44 +11:00 |
SkystarsH7HD
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
SkystarsH7HD-bdshot
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
SpeedyBeeF405Mini
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
SpeedyBeeF405WING
|
hwdef: removed QAUTOTUNE disable
|
2024-11-27 14:07:38 +11:00 |
SuccexF4
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
Swan-K1
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
TBS-Colibri-F7
|
…
|
|
TBS_LUCID_H7
|
AP_HAL_ChibiOS: TBS LUCID H7
|
2024-11-07 14:33:38 +00:00 |
TMotorH743
|
AP_HAL_ChibiOS: fix TMotor H743 with BMI270
|
2024-08-07 17:30:44 +10:00 |
VRBrain-v51
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRBrain-v52
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRBrain-v54
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRCore-v10
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRUBrain-v51
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VUAV-V7pro
|
hwdef: use V-UAV in place of VIEWPRO for link text
|
2024-11-08 10:46:32 +11:00 |
X-MAV-AP-H743v2
|
hwdef:fixed board AP-H743v2 CAN pin definition.
|
2024-11-08 11:23:35 +11:00 |
YJUAV_A6
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
YJUAV_A6SE
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
YJUAV_A6SE_H743
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
YJUAV_A6Ultra
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
ZeroOneX6
|
hwdef: update ZeroOne X6 documentation
|
2024-10-27 11:42:49 +11:00 |
ZubaxGNSS
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
airbotf4
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
common
|
AP_HAL_ChibiOS: exclude chprintf from fastramfunc
|
2024-11-05 08:38:23 +09:00 |
crazyflie2
|
hwdef: Make Crazyflie2 board only autobuild for Copter
|
2024-03-15 21:11:40 +11:00 |
f103-ADSB
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-Airspeed
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-GPS
|
hwdef: f103-GPS: explicltly nominiate compass backends supported
|
2024-09-17 10:31:27 +10:00 |
f103-HWESC
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-QiotekPeriph
|
hwdef: make f103-QiotekPeriph a single compass
|
2023-11-08 18:34:41 +11:00 |
f103-RangeFinder
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-Trigger
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-periph
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
f303-GPS
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-HWESC
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-M10025
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-M10070
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-MatekGPS
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
f303-PWM
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-TempSensor
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-Universal
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-periph
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
f405-MatekAirspeed
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
f405-MatekGPS
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
fmuv2
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
fmuv3
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
fmuv3-bdshot
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
fmuv5
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
include
|
hwdef: removed QAUTOTUNE disable
|
2024-11-27 14:07:38 +11:00 |
iomcu
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
iomcu-dshot
|
AP_HAL_ChibiOS: bdshot for f103 iofirmware
|
2023-12-18 19:02:52 +11:00 |
iomcu-f103
|
AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators
|
2023-08-15 06:53:48 +10:00 |
iomcu-f103-8MHz-dshot
|
AP_HAL_ChibiOS: bi-directional dshot on iomcu F103 8MHz
|
2024-05-28 06:56:14 +10:00 |
iomcu-f103-dshot
|
AP_HAL_ChibiOS: reset pwm peripheral on F1 when deallocating IC DMA
|
2024-06-02 10:54:14 +10:00 |
iomcu_f103_8MHz
|
AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators
|
2023-08-15 06:53:48 +10:00 |
kha_eth
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
luminousbee4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
luminousbee5
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRo-M10095
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
mRoCANPWM-M10126
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
mRoCZeroOEMH7-bdshot
|
hwdef: mRoControlZeroOEMH7 bdshot version
|
2023-09-13 17:04:24 +10:00 |
mRoControlZeroClassic
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoControlZeroF7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoControlZeroH7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoControlZeroH7-bdshot
|
…
|
|
mRoControlZeroOEMH7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoKitCANrevC
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
mRoNexus
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoPixracerPro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoPixracerPro-bdshot
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
mRoX21
|
…
|
|
mRoX21-777
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
mindpx-v2
|
…
|
|
mini-pix
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
modalai_fc-v1
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
omnibusf4
|
hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building
|
2023-10-17 18:21:04 +11:00 |
omnibusf4pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
omnibusf4pro-bdshot
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
omnibusf4pro-one
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
omnibusf4v6
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
rFCU
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
rGNSS
|
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
|
2024-07-30 10:52:36 +10:00 |
revo-mini
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
revo-mini-bdshot
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
revo-mini-i2c
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
revo-mini-i2c-bdshot
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
revo-mini-sd
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
scripts
|
AP_HAL_ChibiOS: do not run through SPI_RX and TX as well
|
2024-10-25 18:16:00 +11:00 |
skyviper-f412-rev1
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
skyviper-journey
|
AP_HAL_ChibiOS: tidy defaulting of OpticalFlow sensor type
|
2024-11-12 12:45:29 +11:00 |
skyviper-v2450
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
sparky2
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
speedybeef4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
speedybeef4v3
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
speedybeef4v4
|
AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN
|
2024-07-24 09:13:50 +10:00 |
sw-boom-f407
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
sw-nav-f405
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
sw-spar-f407
|
hwdef: turn monior thread back on on some boards
|
2024-07-30 10:52:36 +10:00 |
thepeach-k1
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
thepeach-r1
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |