Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
31,191 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

486 Commits

Author SHA1 Message Date
Andrew Tridgell aafd1512e4 HAL_PX4: limit IMU target temperature to 65 2016-09-05 12:59:50 +10:00
Lucas De Marchi e1ab44f4a3 Global: remove get_fd() from Device API 
This was there for compatibility with I2CDriver and SPIDriver. We don't
use them anymore so we can remove the compat method.
 2016-08-29 10:27:36 -03:00
Andrew Tridgell dddaded8d4 HAL_PX4: fixed a race condition in force_safety_on/off 
the status update from IO may not have come through if we force safety
on and then off in quick succession, such as for plane mixer load

this forces the ioctl to be sent at least once
 2016-08-16 12:53:34 +10:00
LukeMike 998033286d AP_HAL_PX4 / Semaphores: removed AP_HAL_VRBRAIN (for now it's better to have different AP_HAL for PX4 and VRBRAIN) 2016-08-07 20:31:50 +10:00
Murilo Belluzzo 077e03678f Global: Adapt Stream class to be used with Ringbuffer 2016-08-03 01:44:02 -03:00
Lucas De Marchi c859c5ecd9 AP_HAL_PX4: update Device interface 2016-07-30 00:55:27 -03:00
Lucas De Marchi 2ef78051c1 AP_HAL_PX4: remove I2CDriver 
I2CDevice now serves for the same purpose.
 2016-07-28 18:08:56 -03:00
Lucas De Marchi 293f94b355 AP_HAL_PX4: Util: fix check for PX4_V4 
When building for px4-v2 we have an warning because we are checking for
the value of this undefined macro. Just change both checks to use
"defined()".

../../libraries/AP_HAL_PX4/Util.cpp:115:7: warning: "CONFIG_ARCH_BOARD_PX4FMU_V4" is not defined [-Wundef]
 #elif CONFIG_ARCH_BOARD_PX4FMU_V4
       ^
 2016-07-19 17:53:46 -03:00
khancyr c4b009f4b5 AP_HAL_PX4 : remove unused variable 2016-07-19 17:44:22 -03:00
Andrew Tridgell 1b8da3bce2 HAL_PX4: implement I2CDevice driver for PX4 2016-07-15 12:24:03 -03:00
Andrew Tridgell 7c2e4d0419 HAL_PX4: implement IMU heater in hal.util for Pixhawk2 2016-07-01 15:29:52 +10:00
Tom Pittenger a512e807dc AP_HAL_PX4: disarm motors on reboot so ensure they are off during bootloader upload 2016-06-04 00:42:43 -07:00
Tom Pittenger 57d6ccc0dd AP_HAL_PX4: skip the 100ms delay on first px4io safety_state async attempt 2016-05-27 11:30:50 -07:00
Tom Pittenger 67aaf7e226 AP_HAL_PX4: defer calls to safety_state switch to queue an async attempt. 
- this allows for auto-retries if the state does not set correctly
 2016-05-27 21:34:40 +10:00
Andrew Tridgell dda35a366c HAL_PX4: prevent rate changes once oneshot is setup 
this fixes a problem with small motor outputs at the start of a motor
test.

Thanks to Luis for reporting this.
 2016-05-26 12:18:49 +10:00
Andrew Tridgell ae3cb0557d HAL_PX4: disable "Overtime in task" msg 
this hasn't helped us find any bugs and it is very annoying with nsh
over MAVLink
 2016-05-25 12:35:42 +10:00
Ricardo de Almeida Gonzaga 892cc2ea6f AP_HAL_PX4: Fix typos 2016-05-13 19:20:06 -03:00
Andrew Tridgell eeef28be5e AP_HAL_PX4: fixed hexacopter on Pixracer 
the _servo_count was 4 as we didn't re-fetch the count after applying
changes in AP_BoardConfig from BRD_PWM_COUNT
 2016-05-11 13:01:15 +10:00
Andrew Tridgell 8a7627474f Revert "AP_HAL_PX4: use new I2CDevice interface" 
This reverts commit f767918e0e.

These commits broke startup on PX4
 2016-05-11 12:19:00 +10:00
Andrew Tridgell 8c06e6cddc Revert "AP_HAL_PX4: embed PX4_I2C object into I2CDevice" 
This reverts commit 54fd3702c3.

These commits broke startup on PX4
 2016-05-11 12:18:45 +10:00
Lucas De Marchi 54fd3702c3 AP_HAL_PX4: embed PX4_I2C object into I2CDevice 
Otherwise we would destroy PX4_I2C object after returning from
I2CDeviceManager::get_device(). Since this implementation is very
simple, just make PX4_I2C as an internal class and embed it into the
I2CDevice object.
 2016-05-10 15:39:24 -03:00
Luiz Ywata f767918e0e AP_HAL_PX4: use new I2CDevice interface 2016-05-10 15:12:30 -03:00
Andrew Tridgell 0af322e90d HAL_PX4: added comment on oneshot 2016-04-22 13:50:05 +10:00
Andrew Tridgell 5ce7ae71a7 HAL_PX4: fixed enabling oneshot on a subset of motors 2016-04-22 13:24:24 +10:00
Andrew Tridgell bcd0d48ced HAL_PX4: fixed non-contiguous motor outputs 
this fixes tricopter with chan3 never set
 2016-04-22 11:51:08 +10:00
Andrew Tridgell 28aa4c40cc HAL_PX4: fixed order of wifi and frsky on FMUv4 
thanks to OXINARF for noticing!
 2016-04-20 10:23:11 +10:00
Andrew Tridgell 4a35f8e9fc HAL_PX4: fixed comments for FMUv4 uarts 2016-04-20 10:08:48 +10:00
Andrew Tridgell 18ccaf7e2b HAL_PX4: added uartF 2016-04-20 09:39:49 +10:00
Andrew Tridgell a731caa4ab HLA_PX4: prevent timer disturbance in oneshot mode 2016-04-16 18:52:31 +10:00
Andrew Tridgell d9d6f87195 HAL_PX4: fixed bug in pwm send code 
many thanks to Oxinarf for spotting this!
 2016-04-16 08:32:04 +10:00
Andrew Tridgell c9dfccfb26 HAL_PX4: improved oneshot support 
this now supports oneshot properly on both IO and FMU
 2016-04-16 07:30:44 +10:00
Andrew Tridgell 6f284d673a HAL_PX4: enable oneshot support on px4io 2016-04-16 07:30:43 +10:00
Peter Barker daa210729c AP_HAL_PX4: correct systemid output for PX4v4 2016-04-14 13:40:27 -07:00
Andrew Tridgell 8695668da3 HAL_PX4: enable wifi port on FMUv4 2016-04-14 08:05:06 +10:00
Andrew Tridgell 5922e67785 HAL_PX4: allow sbus output on channels beyond BRD_PWM_COUNT 2016-04-14 08:05:06 +10:00
Andrew Tridgell 759b0d6629 HAL_PX4: only support oneshot on FMU outputs for now 
oneshot on PX4IO gives some very weird results. I think it is doable,
but will take a bit more work
 2016-04-14 08:05:06 +10:00
Andrew Tridgell 934b4dd475 HAL_PX4: support OneShot on PX4 
this greatly lowers output latency
 2016-04-14 08:05:05 +10:00
Andrew Tridgell 1d5deed72a HAL_PX4: fixed build for new px4 param functions 2016-04-14 08:05:04 +10:00
Lucas De Marchi 28f67f0947 AP_HAL_PX4: replace header guard with pragma once 2016-03-16 18:40:41 +11:00
Andrew Tridgell 2a6e64e358 HAL_PX4: send all channels to px4io 
this allows for 16 channel SBUS out
 2016-03-13 10:03:56 +11:00
Jonathan Challinger 4bf3ec0e91 AP_HAL_PX4: implement RCOutput::read_last_sent 2016-03-10 13:56:27 -08:00
Andrew Tridgell 7fede90df3 HAL_PX4: work around a bus locking issue on Pixracer 
Pixracer has FRAM on the same bus as the ms5611 and the FRAM ramtron
driver does not use the same locking mechanism as other px4 SPI
drivers. We need to disable interrupts during FRAM transfers to ensure
we don't get FRAM corruption
 2016-02-23 16:34:06 +11:00
Lucas De Marchi 8de329fc81 AP_HAL_PX4: use empty I2CDevice 2016-02-16 19:49:09 -02:00
Lucas De Marchi f39a6745d1 Global: remove unused _timer_pending from scheduler 2016-02-12 23:42:34 -02:00
Lucas De Marchi 9aa49cda93 Global: remove system_initializing() from scheduler 
This is not used anymore.
 2016-02-12 23:42:34 -02:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_ 
It helps to distinguish between things from waf and things from ardupilotwaf.
 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa 3d22490397 waf: examples: use methods from bld instead of ardupilotwaf 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa d281067bcc waf: make example binaries be placed in 'examples' dir 
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
 2016-01-15 16:46:41 -02:00
Andrew Tridgell 519afc7a06 HAL_PX4: debug code for FRAM corruption 2016-01-06 19:16:16 +11:00
Andrew Tridgell 526fb65dd1 HAL_PX4: fixed setting of rcout frequency on alt channels 2016-01-05 09:47:52 +11:00
Jonathan Challinger f376510524 AP_HAL_PX4: fix example build 2015-12-29 10:46:35 -08:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem 
AP_Progmem is not used anymore.
 2015-12-27 15:58:12 -02:00
Andrew Tridgell 02bee8810d HAL_PX4: added Semaphore support 2015-12-20 17:55:39 +11:00
Julien BERAUD c0f65ff6e1 AP_HAL_PX4: add empty optical flow 
No onboard optical flow on PX4
 2015-12-18 17:56:04 +11:00
Lucas De Marchi 503533c6fe AP_HAL_PX4: rename AP_HAL_Empty instances 2015-12-08 11:12:14 +11:00
Andrew Tridgell 78e9b0a4e3 HAL_PX4: check for servo counts changing after boot 
this copes with changes to BRD_PWM_COUNT
 2015-12-06 14:19:28 +11:00
Lucas De Marchi fe5d6f2d49 AP_HAL_PX4: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:43 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Lucas De Marchi 6d7678d2a3 AP_HAL_PX4: fix passing callback to member function 
This is the same approach as done for AP_HAL_Linux in e3d78b8 ("AP_HAL_Linux:
fix passing callback to member function"). It fixes the following warnings:

ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp: In member function 'virtual void PX4::PX4Scheduler::init(void*)':
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:55:95: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
  pthread_create(&_timer_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_timer_thread, this);
                                                                                               ^
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:65:94: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
  pthread_create(&_uart_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_uart_thread, this);
                                                                                              ^
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:75:92: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
  pthread_create(&_io_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_io_thread, this);
                                                                                            ^
ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp:85:100: warning: converting from 'void* (PX4::PX4Scheduler::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
     pthread_create(&_storage_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::PX4Scheduler::_storage_thread, this);

ardupilot/libraries/AP_HAL_PX4/NSHShellStream.cpp: In member function 'void PX4::NSHShellStream::start_shell()':
ardupilot/libraries/AP_HAL_PX4/NSHShellStream.cpp:83:99: warning: converting from 'void (PX4::NSHShellStream::*)()' to 'pthread_startroutine_t {aka void* (*)(void*)}' [-Wpmf-conversions]
     pthread_create(&shell_thread_ctx, &thread_attr, (pthread_startroutine_t)&PX4::NSHShellStream::shell_thread, this);
                                                                                                   ^
 2015-12-03 07:51:08 +11:00
Lucas De Marchi 0c3733601b AP_HAL_PX4: use init() method without arguments 
Override the init() method from parent class that doesn't have a
parameter since it's not used here.
 2015-12-02 14:49:11 -02:00
Andrew Tridgell 520b9de48a HAL_PX4: expose do_transfer() in API 2015-12-01 07:18:25 +11:00
Andrew Tridgell 335e621932 HAL_PX4: cope with PX4 header changes 2015-11-27 18:54:31 +11:00
Andrew Tridgell 155e82c1b3 HAL_PX4: fixed PWM output for FMUv4 2015-11-27 18:54:31 +11:00
Andrew Tridgell 9835043dd5 HAL_PX4: support FMUv4 2015-11-27 18:54:30 +11:00
Caio Marcelo de Oliveira Filho c43474fbf4 AP_HAL_PX4: Remove unused extern declaration for HALs 2015-11-20 16:32:32 +09:00
Caio Marcelo de Oliveira Filho 1de0e0a5a6 AP_HAL_PX4: remove unused functions 2015-11-20 12:36:34 +09:00
Caio Marcelo de Oliveira Filho a76c9e0051 AP_HAL_PX4: use millis/micros/panic functions 2015-11-20 12:31:13 +09:00
Caio Marcelo de Oliveira Filho 8db8b9b355 AP_HAL_PX4: implement new AP_HAL functions 
Implement the new AP_HAL functions and use them in the Scheduler when
possible.
 2015-11-20 12:25:40 +09:00
Caio Marcelo de Oliveira Filho efbc7648b1 AP_HAL: create AP_HAL namespace and use for some HAL functionality 
For certain basic functionality, there aren't much benefit to be able to
vary the implementation easily at runtime. So instead of using virtual
functions, use regular functions that are "resolved" at link time. The
implementation of such functions is provided per board/platform.

Examples of functions that fit this include: getting the current
time (since boot), panic'ing, getting system information, rebooting.

These functions are less likely to benefit from the indirection provided
by virtual interfaces. For more complex hardware access APIs the
indirection makes more sense and ease the testing (when we have it!).

The idea is that instead of calling

    hal.scheduler->panic("on the streets of london");

now use

    AP_HAL::panic("on the streets of london");

A less important side-effect is that call-site code gets
smaller. Currently the compiler needs to get the hal, get the scheduler
pointer, get the right function pointer in the vtable for that
scheduler. And the call must include an extra parameter ("this"). Now it
will be just a function call, with the address resolved at link time.

This patch introduces the first functions that will be in the namespace,
further patches will implementations for each board and then switch the
call-sites. The extra init() function allow any initial setup needed for
the functions to work.
 2015-11-20 12:25:24 +09:00
Andrew Tridgell 8f4ce7f20b build: removed all nocore.inoflag files 
these were APM2 specific
 2015-11-16 08:05:17 +11:00
Andrew Tridgell ac1c0bba15 HAL_PX4: make available_memory() uint32_t 2015-11-05 16:09:00 +11:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char 
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
 2015-10-30 14:35:30 +09:00
Lucas De Marchi 6f4904189b Replace use of println_P() with println() 2015-10-30 14:35:22 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR 
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
 2015-10-30 14:35:04 +09:00
Lucas De Marchi 9eaf7c5660 AP_HAL: add format attribute to panic() 2015-10-24 14:26:36 +11:00
Lucas De Marchi f791767fb2 AP_HAL_PX4: Scheduler: implement variadic version of panic() 2015-10-24 14:26:36 +11:00
Lucas De Marchi ad61a93c14 AP_HAL: turn panic() into a variadic method 
Change the declaration on all HAL implementations so panic() in future
may implement a printf-like interface.
 2015-10-24 14:26:35 +11:00
Caio Marcelo de Oliveira Filho 5781164624 AP_HAL_PX4: remove unnecessary includes from example 2015-10-21 09:16:12 +11:00
Caio Marcelo de Oliveira Filho 19b4ca60c4 AP_HAL: provide AP_HAL_MAIN() 
Move the macros to a single place and reduce the variations not based on
board, but based on

- The name of the entry-point function, specified by AP_MAIN;
- Whether it contains argc/argv arguments or not.

The goal here is that programs (vehicles and examples) don't need to
include all possible boards to define a main function. Further patches
will change the programs.
 2015-10-21 09:16:09 +11:00
Caio Marcelo de Oliveira Filho cb61bdd8d1 AP_HAL_PX4: merge init() and run() 2015-10-21 09:16:08 +11:00
Caio Marcelo de Oliveira Filho 0dab23c4df AP_HAL_PX4: implement HAL::run() 2015-10-21 09:16:08 +11:00
Caio Marcelo de Oliveira Filho ec52df991c build: compile only the HAL files needed by the board 
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
 2015-10-21 09:16:07 +11:00
Caio Marcelo de Oliveira Filho 2e464a53c2 AP_HAL: make code not depend on concrete HAL implementations 
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.

A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.

The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.

Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.

The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
 2015-10-21 09:16:07 +11:00
Andrew Tridgell 8dbb51c64e HAL_PX4: implement AP_HAL::Util perf calls for PX4 2015-10-20 18:09:57 +11:00
Lucas De Marchi ce674f6926 AP_HAL_PX4: remove unused write method 2015-09-29 11:53:49 +09:00
Andrew Tridgell cbd43ee6ea HAL_PX4: added hal.i2c support on PX4 boards 
this allows I2C based devices to use in-tree drivers
 2015-09-08 16:46:52 +10:00
Tom Pittenger 072d35b9cc AP_HAL_PX4: remove unused var 2015-08-25 13:51:21 +09:00
Brad Bosch 6e9756ff79 HAL_PX4: Rework support for FLOW_CONTROL_AUTO. 
Now instead of requiring the buffer to fill completely before we can
detect it is not draining, we use a time based mechanism to detect
when none of the first few bytes are transmitted after sitting in our
buffer a half second or more after flow control is enabled.  This
huristic is reliable only for the first several chracters because we
believe that the radio must still have plenty of room in it's own
buffers at that time even if it is not able to transmit them to the
other radio yet.  Note that the original algorithm made the same
assumption.

The new algorithm is especially helpful for cases where only keepalive
messages are transmitted before other packets can be requested by the
GCS.  In this situation, the original code required almost 2 minutes
to disable flow control and allow communication with the GCS.
 2015-08-19 15:21:10 +10:00
Lucas De Marchi 83cfaf4a59 AP_HAL_PX4: standardize inclusion of libaries headers 
Do the missing header changes due to changing the code before the pr
getting accepted.
 2015-08-18 17:12:51 +10:00
Andrew Tridgell e73ac418df HAL_PX4: prevent error on GPIO line on change of pinMode 
thanks to Michael for noticing this
 2015-08-17 12:02:03 +10:00
Gustavo Jose de Sousa 08333f1ffe AP_HAL_PX4: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:28:43 +10:00
Andrew Tridgell 1b61f6f636 HAL_PX4: fixed USB connected on AUAV-X2 
this is the 2nd attempt at a fix for the usb_connected status on
AUAV-X2
 2015-08-11 11:42:02 +10:00
Lucas De Marchi d4d56aef1a AP_HAL_PX4: use ARRAY_SIZE macro 2015-07-21 14:25:01 +09:00
Julien BERAUD 7275e33e79 AP_HAL: add the possibility to have more than 1 i2c 
Bebop drone has 3 i2c
 2015-07-10 14:23:17 +10:00
Andrew Tridgell f4a9f9876f HAL_PX4: make usb_connected() more robust 
thanks to a suggestion from Phillip Kocmoud, this should fix issues
with the XUAV-X2
 2015-07-08 11:19:07 +10:00
Andrew Tridgell d909f11ba3 HAL_PX4: added implementation of NSH shell stream 2015-06-17 20:30:09 +10:00
Andrew Tridgell dea36c1ae9 HAL_PX4: fixed build on non-PX4 systems 2015-06-11 15:17:02 +10:00
Andrew Tridgell 88655b48e1 HAL_PX4: added px4_param stub functions 
this replaces the PX4 parameter system with stub functions that fail
all parameter find calls
 2015-06-11 13:31:41 +10:00
Eugene Shamaev 40a5aa497a HAL_PX4: added rc_bind for DSM bind 2015-06-10 17:19:09 +10:00
Andrew Tridgell d6af9fd0ee HAL_PX4: prevent uavcan motor spin up while booting 2015-06-09 19:45:01 +10:00
Andrew Tridgell 6a33aeef67 HAL_PX4: cope with multi-instance actuator_outputs uORB 
we need to subscribe to all of them
 2015-06-09 19:45:00 +10:00
Andrew Tridgell 333778bac1 HAL_PX4: updates for upstream merge 2015-06-09 19:44:20 +10:00
Andrew Tridgell c44ab01be8 AP_HAL: use noreturn attribute on panic 
should reduce coverity warnings
 2015-06-08 21:09:08 +10:00
Andrew Tridgell ca8482b4d6 AP_HAL_PX4: convert example from .pde to .cpp 2015-06-01 17:07:04 +10:00
Andrew Tridgell 43fb1202f2 HAL_PX4: fixed functor comparison with NULL 2015-05-26 13:54:38 +10:00
Tom Pittenger 98c5137107 AP_HAL_PX4: compiler warnings: float to doubles 2015-05-05 13:26:56 +10:00
Andrew Tridgell 40e3b422b5 HAL_SITL: rename HAL_AVR_SITL to HAL_SITL 
it is nothing to do with the original AVR emulation now
 2015-05-05 09:45:54 +10:00
Randy Mackay 187dd0dccd HAL_PX4: fix example sketch 2015-05-01 16:44:10 +09:00
Andrew Tridgell 020d9ea78a HAL_PX4: only consider power to have changed when armed 
this prevents false positives with multi-battery setups
 2015-04-28 11:05:29 +10:00
Tom Pittenger 3b3752468d HAL_PX4: fix compile warnings re unused variables 2015-04-24 14:18:24 +09:00
Tom Pittenger 179c72bfa9 HAL_PX4: fix compile warning re member init order 2015-04-24 14:14:38 +09:00
Tom Pittenger 7e18480cd2 HAL_PX4: fix compile warnings re float constants 2015-04-24 12:49:18 +09:00
Andrew Tridgell 7cd7ff89fd HAL_PX4: recover 12k of ram from USB buffers 
faster NuttX means we don't need such larger buffers
 2015-03-27 15:08:52 -07:00
Andrew Tridgell 086f878bdc HAL_PX4: split IO thread into separate IO and storage threads 
this prevents a blocked microSD card from blocking IO to the FRAM,
causing parameter changes not to be sticky
 2015-03-04 20:18:17 +11:00
Andrew Tridgell 18131eae13 HAL_PX4: added delay_microseconds_boost() 
implemented using hrt callback with sem_post wrapper
 2015-02-16 12:19:13 +11:00
Andrew Tridgell 619196b6b3 HAL_PX4: fixes for new PX4 device paths 2015-02-14 12:25:44 +11:00
Andrew Tridgell 001643d5a3 HAL_PX4: always use the hrt semaphore based delay 
the up_udelay() could cause too much timing jitter
 2015-02-14 12:25:43 +11:00
Andrew Tridgell 7f0060b881 HAL_PX4: reduce the amount of time between loop() calls 
500usec is too long for 400Hz copter
 2015-02-14 12:25:43 +11:00
Andrew Tridgell ebacb2b496 HAL_PX4: call parent Util constructor 2015-02-11 20:57:28 +11:00
Jonathan Challinger e908fcafb1 AP_HAL_PX4: attempt to initialize USB while soft-disarmed 2015-02-11 20:57:27 +11:00
Andrew Tridgell f548d48fdc HAL_PX4: implement updated new_input() semantics 2015-02-09 10:39:12 +11:00
Andrew Tridgell f2a919c55e AP_HAL_PX4: moved size of main thread stack to Scheduler.h 
make it more obvious
 2015-02-07 08:06:53 +11:00
Randy Mackay 12bd5cd6b1 AP_HAL_PX4: fix example sketch 2015-01-28 21:00:30 +09:00
Andrew Tridgell 464714f1ab HAL_PX4: fixed build warning 2015-01-09 11:37:46 +11:00
Andrew Tridgell 0c73dc2440 HAL_PX4: use common RingBuffer.h 2015-01-07 08:41:14 +11:00
Andrew Tridgell 4a91546ced HAL_PX4: FRAM does not support fsync 
the fsync just wastes time reopening /fs/mtd
 2014-12-09 14:35:36 +11:00
Andrew Tridgell 4132b53541 HAL_PX4: publish actuator values for UAVCAN ESCs 
this publishes scaled actuator values so that the uavcan module can
drive ESCs
 2014-11-26 11:14:44 +11:00
Matthias Badaire 1d3a49e466 AP_HAL_PX4 : make UARTDriver capable to be called from different threads. 
The modification allows the read and write functions to be called by any thread but the calling thread must be the last one that called the begin() function.
 2014-11-14 13:51:16 +11:00
Andrew Tridgell 154bf51279 HAL_PX4: minor tidy up of if statement 2014-11-14 13:51:16 +11:00
Holger Steinhaus 9e9c62d245 HAL_PX4: work-around for periodic enable_ch() calls 2014-11-14 13:51:16 +11:00
Holger Steinhaus e5549c90a1 HAL_PX4: do not overwrite disabled channels with zeros 
Fixes #1321
 2014-11-14 13:51:16 +11:00
Andrew Tridgell e22c8b27a9 HAL_PX4: if there are no enabled channels don't send to PX4IO 
this makes it possible to disable PWM output to IO to test override
 2014-11-07 10:39:07 +11:00
Andrew Tridgell 7e3b8a30f5 HAL_PX4: use px4io generated values for servo output readback 
this makes it easier to observe the behaviour of IO failsafe
 2014-11-05 21:54:53 +11:00
Andrew Tridgell 10b0ca7ea8 HAL_PX4: reduce the number of times we split up UART reads and writes 2014-10-09 12:29:25 +11:00
Randy Mackay ffcd259b4e HAL_PX4: implement force_safety_on 2014-09-18 09:58:46 +09:00
Andrew Tridgell 74525cad89 HAL_PX4: fixed dirty_mask calculation in FRAM storage 
this could lead to a number of bytes on 512 byte boundaries not being
written when changed in ram, so they would revert on next boot
 2014-09-11 18:58:54 +10:00
Andrew Tridgell 48247b6adc HAL_PX4: minimise usage of hrt_absolute_time() 2014-08-20 09:10:24 +10:00
Andrew Tridgell 1241da466b HAL_PX4: added millis64() and micros64() 2014-08-20 08:01:06 +10:00
Andrew Tridgell 0a20d0db60 HAL_PX4: prevent read past end of buffer 2014-08-19 10:08:17 +10:00
Andrew Tridgell 41f7ad42d4 HAL_PX4: fixed example build 2014-08-13 21:48:35 +10:00
Andrew Tridgell c864f3eed5 HAL_PX4: enable full storage size on PX4 2014-08-13 18:46:45 +10:00
Andrew Tridgell d40d0f6aec AP_HAL: removed old storage type read/write functions 
not needed any more
 2014-08-13 18:46:44 +10:00
Andrew Tridgell d1a75874a1 HAL_PX4: don't report power status change if in first 5 seconds 2014-08-09 22:50:14 +10:00
Andrew Tridgell 02dec5634f AP_HAL: fixed example builds 2014-07-25 17:52:01 +10:00
Andrew Tridgell b2bc098aee HAL_PX4: avoid some float conversion warnings 2014-07-08 20:27:19 +10:00
Andrew Tridgell 849c4905fb HAL_PX4: print overtime message on stuck task 
this should make it easier to narrow down stuck task bugs
 2014-07-03 09:11:24 +10:00
Andrew Tridgell fa4eb5475a HAL_PX4: implement analog input stop pins 
this allows multiple sonars to cooperate without interference
 2014-06-02 08:35:41 +10:00
Andrew Tridgell 37c50d9587 HAL_PX4: fixed use of FMU servo pins as digital inputs 
these pins can be PWM output or digital input or digital output
 2014-05-25 22:03:44 +10:00
Andrew Tridgell a7d6a26bec HAL_PX4: fixed auto-flow control 
the 6 bytes written to break the radio out of bootloader broke
auto flowcontrol detection
 2014-05-19 22:02:39 +10:00
Andrew Tridgell 320834a5e7 HAL_PX4: read from FRAM in 128 byte chunks (2nd try) 
this time without the amazingly silly bug
 2014-05-02 22:12:45 +10:00
Andrew Tridgell db6b96caa0 Revert "HAL_PX4: read from FRAM in 128 byte chunks" 
This reverts commit a92366c455.

This commit may be associated with FRAM corruption on Pixhawk. Revert
until we understand why
 2014-05-02 21:52:26 +10:00
Andrew Tridgell a92366c455 HAL_PX4: read from FRAM in 128 byte chunks 
this fixes FRAM read on Roberts Pixhawk. We don't know why yet.
 2014-05-02 12:24:54 +10:00
Andrew Tridgell 5cd145a307 AP_HAL: added set_failsafe_pwm() API 
this allows the PWM values for FMU firmware failure to be setup
 2014-04-21 08:36:52 +10:00
Andrew Tridgell 6eee2421cc AP_HAL: removed RCInput valid_channels() and added new_input() and num_channels() 
the valid_channels() method was inconsistently implemented between
boards, and served two quite different purposes. It is clearer as two
functions
 2014-03-25 14:39:41 +11:00
Andrew Tridgell 2a9a89e020 HAL_PX4: fixes for merged upstream PX4Firmware 2014-03-25 10:30:00 +11:00
Andrew Tridgell d36989f6a1 AP_HAL: fixed example build 2014-03-19 12:14:06 +09:00
Andrew Tridgell 5f85e7af6a HAL_PX4: switch to new serial port for 2nd GPS 2014-03-04 20:34:44 +11:00
Andrew Tridgell bf2dd141e9 HAL_PX4: support uartE for 2nd GPS 2014-02-26 08:18:11 +11:00
Andrew Tridgell 830afefcef AP_HAL: fixed example build 2014-02-15 06:40:29 +11:00
Andrew Tridgell bea0a46410 AP_HAL: added servorail_voltage and power_status_flags() API on AnalogIn 2014-02-15 05:00:09 +11:00
Andrew Tridgell 7c1b9b344f AP_HAL: added get_flow_control() API 2014-02-14 21:51:00 +11:00
Andrew Tridgell 1849db7074 AP_HAL: added board_voltage AnalogIn method 
this makes it easier to get the board voltage from any library,
without having to allocate another analog channel object
 2014-02-14 21:25:38 +11:00
Andrew Tridgell 4e2e685d7a HAL_PX4: better fix for IFLOW on all ports 
the tcsetattr() call fails to apply the baudrate if the port has no
RTS pin and we ask for IFLOW. So just make a separate call.
 2014-02-12 17:47:23 +11:00
Andrew Tridgell b2cdd39a99 HAL_PX4: don't enable IFLOW on ports without flow control 
this should have been harmless, but breaks the GPS on Pixhawk. This
disables it until we work out why.
 2014-02-12 17:32:07 +11:00
Andrew Tridgell c93794999e HAL_PX4: remove an old conditional define 2014-02-11 15:58:25 +11:00
Andrew Tridgell 439a075b30 AP_HAL: added force_safety_off rcoutput function 
this forces the safety switch off, enabling PWM on the IO board
 2014-02-11 15:58:25 +11:00
Andrew Tridgell c5c1d1358a HAL_PX4: added automatic hardware flow control detection 
this allows us to detect if hardware flow control is not available and
automatically disable it
 2014-02-11 12:11:26 +11:00
Andrew Tridgell 3e637ac5d9 AP_HAL: added enable_flow_control() option in AP_HAL 2014-02-10 12:54:50 +11:00
Andrew Tridgell 99b41f110f HAL_PX4: enable the FMU PWM pins to be used as GPIO when needed 2014-01-20 17:06:28 +11:00
Andrew Tridgell 87cc95dd7f AP_HAL: removed unused enable_mask and disable_mask functions 2014-01-16 17:16:17 +11:00
Andrew Tridgell e1f06c532a HAL_PX4: more checking of IO results in eeprom driver 2014-01-16 13:11:14 +11:00
Andrew Tridgell 3ae6f03761 HAL_PX4: be less verbose about disarmed PWM setup 2014-01-16 13:11:13 +11:00
Andrew Tridgell db1d438e97 HAL_PX4: implement set_safety_pwm() API 
used to set PWM on motors when disarmed
 2014-01-15 22:25:50 +11:00
Andrew Tridgell 64fbadcc21 HAL_PX4: use eeprom on PX4 FMUv1 as well 
this means we no longer store params on SD at all
 2014-01-15 19:33:13 +11:00
Andrew Tridgell 376ab30366 HAL_PX4: disable rename of old parameter file for now 
be nice to release candidate users
 2014-01-14 22:00:56 +11:00
Andrew Tridgell 626086063e HAL_PX4: added a signature to FRAM 
this makes for more reliable update
 2014-01-14 15:06:51 +11:00
Andrew Tridgell b88bb0751c HAL_PX4: added support for MTD (FRAM) parameters 
this allows us to store parameters and waypoints in FRAM, and
auto-upgrade from microSD
 2014-01-14 12:46:26 +11:00
Andrew Tridgell e78e35f3bd HAL_PX4: try to use uppercase names on NuttX microSD card 2014-01-14 12:46:26 +11:00
Andrew Tridgell 63586e3e23 HAL_PX4: fixed build for new PX4Firmware 2014-01-13 13:54:51 +11:00
Andrew Tridgell 89676be825 HAL_PX4: fixed RCInput race condition 
the number of channels could be zero with thread switch at the wrong
time
 2013-12-31 22:25:16 +11:00
Andrew Tridgell a2997704eb HAL_PX4: removed code which drops throttle to 900 on loss of RC 
rely on vehicle code checking for last data coming in
 2013-12-31 10:58:49 +11:00
Andrew Tridgell ea649e036b AP_HAL: added HAL_CPU_CLASS define for selecting algorithms 
this will make it easier to select the appropiate level of algorithm
for a CPU
 2013-12-31 10:28:37 +11:00
Andrew Tridgell a95868e124 HAL_PX4: even larger tx buffer size for faster log transfer 2013-12-28 16:01:48 +11:00
Andrew Tridgell 22bdee8727 HAL_PX4: implement available_memory() 2013-12-28 16:01:28 +11:00
Andrew Tridgell ff7004fcc5 HAL_PX4: use larger buffers on USB 2013-12-28 14:25:54 +11:00
Andrew Tridgell e321ad65f4 AP_HAL: fixed example build 2013-12-17 11:51:37 +11:00
Andrew Tridgell f433796435 HAL_PX4: removed an unused variable 2013-12-11 10:22:34 +11:00
Andrew Tridgell 4b4f5ed1c0 HAL_PX4: support get_system_id() on PX4 2013-11-26 13:00:03 +11:00
Andrew Tridgell 0b25ff0a16 HAL_PX4: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell 24d1cf3bd6 HAL_PX4: don't check USB for data if not connected 2013-11-05 14:41:42 +11:00
Andrew Tridgell 8dc6b758f3 HAL_PX4: switch to delay_microseconds_semaphore() for UART timer 
this may prevent some timing jitter on the GPS UARTs
 2013-11-05 14:41:24 +11:00
Andrew Tridgell 5800c2a2c8 HAL_PX4: prevent excessive writes on startup from blocking 
this could cause copter on PX4 to hang on startup
 2013-10-28 16:12:44 +11:00
Andrew Tridgell 622f0dcc1d HAL_PX4: prevent threads running before subsystems are initialised 
this fixes a bug where the timer thread would hang waiting for the
console on startup. This caused the "hit enter" behaviour with recent
PX4 bugs, as AnalogIn tried to read from fd==0, which was a console
read
 2013-10-26 18:12:35 +11:00
Andrew Tridgell 34cde1a640 HAL_PX4: implement set_system_clock() 2013-10-24 14:22:48 +11:00
Andrew Tridgell 1c091cbca5 HAL_PX4: fixed a scheduler bug that affects UART IO 
we need to detect if we are in a timer task using a PID, not a
flag. This is the same type of bug I fixed last week, but now fixed
properly.

The bug could well be the "USB bug" that Craig has been chasing
 2013-10-19 16:50:38 +11:00
Andrew Tridgell d973730b88 HAL_PX4: use hrt timer and semaphores to improve timing 
this gives much more accurate microsecond delays, while also ensuring
we yield the CPU when possible
 2013-10-14 08:29:30 +11:00
Andrew Tridgell e34cc6dd9a HAL_PX4: added some UART debugging 
this may help to track down USB issues
 2013-10-13 12:43:25 +11:00
Andrew Tridgell 63bee0b2d8 HAL_PX4: disable checks for in_timerprocess 
these are not valid in this form for the way the timer thread works on
PX4.
 2013-10-11 16:06:35 +11:00
Andrew Tridgell 67db1cedaa HAL_PX4: fixed delay_microseconds() on PX4 
we could underflow and delay a very long time!
 2013-10-08 17:31:15 +11:00
Andrew Tridgell 7cab8cb3bb HAL_PX4: removed Console driver 2013-10-05 18:33:07 +10:00