Randy Mackay
4ef53427f2
Copter: allow ADSB to be disabled
2015-11-27 15:02:17 +09:00
Randy Mackay
731c44d053
Copter: allow terrain to be excluded from build
2015-11-14 12:38:47 +09:00
Randy Mackay
26ded641db
Copter: integrate Precision Landing lib
2015-08-31 18:00:28 +09:00
Randy Mackay
9c6531ebeb
Copter: simplify APM_Config after removing APM1,2 support
2015-03-13 16:41:05 +09:00
Randy Mackay
8ea65c2dc2
Copter: APM_Config define to disable FRSKY telem
2015-01-29 14:05:14 +11:00
Randy Mackay
2e7435df52
Copter: remove unused OF_LOITER pid defines
2014-12-31 13:16:18 +09:00
Randy Mackay
f2b0fc3566
Copter: disarm on landing regardless of pilot input
2014-12-27 13:33:06 +09:00
priseborough
be54f2d6ee
Copter : Don't force pre-compiler inclusion of optical flow
2014-12-06 18:16:48 +11:00
priseborough
6d5fb33d1a
Copter : enable optical flow by default
2014-12-06 18:16:47 +11:00
Randy Mackay
8b80e58861
Copter: enable OPTFLOW - do not merge to master
2014-12-06 18:16:44 +11:00
Randy Mackay
a559a12ea2
Copter: remove LOG_FROM_STARTUP define
...
This compile-time method is obsolete now that we have the logging while
disarmed feature
2014-10-17 16:40:18 +09:00
Randy Mackay
67b7b2d667
Copter: enable optflow by default for Pixhawk
2014-10-15 16:36:31 +09:00
Randy Mackay
8997c224e2
Copter: enable Guided velocity controller for Pixhawk
2014-10-13 21:40:20 +09:00
Randy Mackay
193bc5331a
Copter: cleanup enabling of cli and frsky telem for APM
2014-09-20 14:41:26 +09:00
Randy Mackay
9bbf40109e
Copter: add LOG_FROM_STARTUP definition
...
Uncommenting this line in APM_Config.h will start logging as soon as the
board starts up instead of waiting for the vehicle to be armed
2014-09-20 12:23:47 +09:00
Randy Mackay
adf00a207b
Copter: enable EPM by default on Pixhawk
2014-09-17 21:14:22 +09:00
Matthias Badaire
147e91877e
Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry
...
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:19 -07:00
Randy Mackay
65e5367619
Copter: rename hybrid to poshold
2014-07-11 14:09:01 +09:00
Randy Mackay
fdc0ec837b
Copter: add nav_guided suport to Auto mode
2014-07-06 17:00:31 +09:00
Randy Mackay
20719e23fd
Copter: enable PARACHUTE and RALLY for all but APM
2014-05-27 14:43:33 +09:00
Randy Mackay
d857427444
Copter: disable RALLY points by default
...
This saves 2k of flash which allows the code to fix on the APM1/2
2014-04-30 21:46:21 +09:00
Randy Mackay
19f1e7fec4
Copter: disable Parachute by default
...
This saves 1k of flash and we are desperately low on the APM1/APM2.
Hopefully we can find savings somewhere and re-enable it by default.
2014-04-24 19:02:32 +09:00
Randy Mackay
287af8f66e
Copter: disable optical flow by default
...
We have run out of flash on the APM2, it was a choice between Hybrid
flight mode and OF_Loiter
2014-04-23 15:27:08 +09:00
Randy Mackay
55e7e1eb3e
Copter: allow HYBRID to be disabled to save flash
...
Hybrid flight mode costs 4.5k of flash which currently puts us over the
limit for APM1 and APM2 unless optical flow or other features are
disabled
2014-04-23 15:27:05 +09:00
Andrew Chapman
fa3732ac6d
Copter: integrate AP_Rally
2014-04-19 15:00:23 +09:00
Randy Mackay
ff32b27272
Copter: integrate parachute lib
2014-04-07 13:36:44 +09:00
Andrew Tridgell
640b64f5e4
Copter: convert to new GPS API
2014-04-01 06:38:24 +11:00
Randy Mackay
54e131cf1f
Copter: re-enable CLI for Pixhawk
2014-03-08 15:17:02 +09:00
Randy Mackay
7992a1a7d3
Copter: disable the CLI by default
...
This is unfortunate but master's flash size is over the APM2 limit
2014-03-05 12:03:56 +09:00
Randy Mackay
d9b7559379
Copter: remove duplicate #define from APM_Config.h
2014-02-17 16:44:47 +09:00
Randy Mackay
814157324d
Copter: APM_Config AUTOTUNE_ENABLED
2014-02-15 05:27:45 +11:00
Dneault
f48e106271
Copter: add coax heli support
...
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
2014-02-07 12:36:04 +09:00
Randy Mackay
a9f1a2ee5e
Copter: disarm on land even if pilot throttle not zero
...
default behaviour remains as before, this is an compile time option only
2014-01-15 11:31:00 +09:00
Randy Mackay
21cda96f67
Copter: EPM enable/disable to APM_Config.h
2013-12-17 15:36:44 +09:00
Randy Mackay
59cea4b88c
Copter: remove CopterLED from main code
2013-11-30 18:20:55 +09:00
ssq870424
07d3f2a3c5
Copter: add support for singlecopter airframe
...
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
2013-11-12 23:40:27 +09:00
Randy Mackay
465cb8ab25
Copter: add features that can be disabled to APM_Config.h
2013-10-28 12:36:52 +09:00
Randy Mackay
390a8c02a5
Copter: enable AUTOTUNE by default
2013-10-18 13:58:08 +09:00
Randy Mackay
d2bbc06502
Copter: allow throttle deadband to be redefined in APM_Config.h
2013-10-13 20:41:11 +09:00
Randy Mackay
0e740bd4e1
Copter: enable AUTOTUNE for mission planner build
2013-10-13 11:57:50 +09:00
Randy Mackay
a53d28e018
Copter: remove support for dmp ahrs
2013-09-27 10:42:49 +09:00
Randy Mackay
02f7310689
Copter: make it easier for Arduino users to easily reduce flash space by turning off features
2013-09-26 13:15:30 +09:00
Randy Mackay
5b00ce24ed
Copter: minor user hooks cleanup
...
Only define and call functions if the appropriate #define in
APM_Config.h has been added
2013-05-17 12:19:07 +09:00
Randy Mackay
1426f40319
Copter: remove unused JDrones motor PID overrides
2013-05-17 12:05:20 +09:00
Randy Mackay
19394918dd
Copter: simplify APM_Config.h
...
Remove items that can be more easily set with parameters
2013-05-17 12:01:39 +09:00
Andrew Tridgell
0d027b7a23
Copter: updates for new compass API
2013-05-02 12:48:14 +10:00
Randy Mackay
a53e5f747b
Copter: add fourth yaw behaviour, look-at-home
...
Added get_wp_yaw_mode to remove duplication of checks of the
WP_YAW_BEHAVIOR parameter
2013-04-20 15:36:24 +09:00
Randy Mackay
597a4b912a
Copter: fix to allow building HIL_MODE_SENSORS
2013-03-18 13:41:52 +09:00
Randy Mackay
102b5da59d
Copter: remove unnecessary #defines from APM_Config.h
2013-02-24 14:41:56 +09:00
Randy Mackay
67c69a19ee
Copter: remove baro-only alt hold
...
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
2013-02-24 14:41:29 +09:00
Randy Mackay
b74da54c98
Copter: enable inav xy by default
2013-02-24 14:41:21 +09:00
Randy Mackay
766ccdf6f8
Copter: add selection of inertial nav wp controller to APM_Config.h
2013-02-24 14:41:13 +09:00
Robert Lefebvre
dde713aaa5
Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this.
2013-01-20 21:32:00 +09:00
Randy Mackay
fef7569dee
Copter: added experimental LOITER_REPOSITIONING #define to config.h
...
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
2013-01-14 13:34:14 +09:00
Andrew Tridgell
394dccf9a8
Copter: make config defaults match 2.9
2013-01-02 15:27:42 +11:00
Robert Lefebvre
6e64b1b357
ACM: Precision Loiter RePositioning code.
...
Protected behind a #define
2013-01-02 09:19:39 +11:00
Pat Hickey
22ac39a4ef
ArduCopter: disable and remove InertialNav defines from APM_Config
...
* We're not going to have the RAM available to support those in general release
2012-12-20 14:52:29 +11:00
Pat Hickey
2aa4657315
ArduCopter: changes to use CONFIG_HIL_BOARD
2012-12-20 14:52:28 +11:00
Pat Hickey
4b84e99f85
remove dumb user hooks comments
2012-12-20 14:52:28 +11:00
Robert Lefebvre
1b97a92098
ACM: Code Cleanup
2012-12-08 14:49:38 -05:00
rmackay9
85c8bdce15
ArduCopter: removed unused and out-of-date #defines from APM_Config.h
2012-12-08 13:38:39 +09:00
rmackay9
4ca27defb3
ArduCopter: update comments related to CH7 switch options
2012-12-06 17:40:36 +09:00
rmackay9
8d682b9812
ArduCopter: disable INERTIAL_NAV_XY by default
2012-12-06 10:32:02 +09:00
rmackay9
072ffec493
ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position
2012-12-06 10:31:41 +09:00
rmackay9
aa5e7e63a0
ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE)
2012-12-06 10:31:36 +09:00
Robert Lefebvre
3e65dd3ded
ACM: TradHeli APM_Config.h changes
2012-12-04 13:32:40 -05:00
Robert Lefebvre
07d7d90882
ACM: TradHeli
...
Bringing in Low Pass Filter for Rate Controllers
2012-11-26 21:51:23 -05:00
Robert Lefebvre
6b8c39dd10
ACM: Creating Yaw_Look_Ahead yaw mode.
...
This function is not fully tested yet.
2012-11-26 21:37:13 -05:00
Robert Lefebvre
9e45e906fb
ACM: TradHeli
...
Move some TradHeli #defines into one place in APM_Config to clean up config.h and defines.h
2012-11-26 19:09:55 -05:00
Jason Short
f344eb875a
ACM: Allow greater than 45° pitch and roll in Stab
2012-11-11 18:07:58 -08:00
rmackay9
cec96a76d7
ArduCopter: comment out InertialNav related Alt Hold and Loiter PID changes from APM_Config.h
2012-11-07 19:21:36 +09:00
rmackay9
fa0963d592
ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV
2012-10-08 12:31:51 +09:00
rmackay9
95763e610b
ArduCopter: allow DMP to run in parallel with DCM
...
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
2012-09-30 00:25:40 +09:00
Pat Hickey
b02340fe10
APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE
2012-09-05 15:36:57 -07:00
uncrustify
09fbe8e29a
uncrustify ArduCopter/APM_Config.h
2012-08-21 19:19:50 -07:00
rmackay9
1d32e03f61
ArduCopter: added ACCEL_ALT_HOLD and INERTIAL_NAV to config.h and commented out of APM_Config.h.
...
Reduces possibility of difference between arduino ide compiled code and script built code (i.e. autotester, mission planner)
2012-08-19 12:31:02 +09:00
Jason Short
387a021c30
ACM : APM_Config.h : default removed for toy mixer.
2012-08-16 15:41:35 -07:00
Jason Short
c305237e3a
ACM : Added CH_7 Multimode
2012-08-11 22:37:26 -07:00
Jason Short
4a56e8ea2c
ACM : Toy Mixer options
2012-08-09 16:59:43 -07:00
Amilcar Lucas
af08b630cd
Spellcheck in comments
2012-08-06 00:21:14 +02:00
rmackay9
3047084ed3
ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it.
2012-07-28 16:31:38 +09:00
Jason Short
97845cace1
Arducopter: INS
...
Updated INS gains
2012-07-18 22:57:10 -07:00
Andreas M. Antonopoulos
a976a59c88
AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling.
2012-07-16 11:46:43 -07:00
Andreas M. Antonopoulos
c73f7ef3ab
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Andrew Tridgell
60caaa4b04
MAVLink: remove MAVLink 0.9 protocol support
...
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Jason Short
8b212d8baa
Adjustments to the Inertial_nav
...
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
2012-06-20 08:47:47 -07:00
Jason Short
e31a1d969f
Inertial Nav disabled by default
2012-06-13 22:37:52 -07:00
Jason Short
c42f9ece43
Inertial Control
...
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.
This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.
Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.
The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
Andrew Tridgell
4fee26437b
MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI
2012-04-24 22:24:58 +10:00
rmackay9
68e37774a6
ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use
2012-03-15 21:58:42 +09:00
Adam M Rivera
2524f9c8df
AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
rmackay9
706bea5992
ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino
2012-03-06 22:15:02 +09:00
Pat Hickey
6573cec611
ArduCopter APM_Config.h: add sample custom channel config
...
* uses new config variables introduced in 8a19543fd1e09621ba
2012-02-11 16:05:51 -08:00
Jason Short
7c25253422
Enabled auto throttle hold
2012-01-20 22:52:31 -08:00
Jason Short
2831ff9148
Off by default
2012-01-20 22:52:29 -08:00
Jason Short
3ebed0b278
This allows users to test the Auto_throttle hold or cruise value
2012-01-14 11:43:52 -08:00
analoguedevices
70b7951366
Eliminated second instance of APM2 #defines
2012-01-12 20:38:41 +00:00
analoguedevices
d46f36e624
Put in commented-out APM2 #defines, to save people the trouble of having to type them in themselves
2012-01-09 01:59:55 +00:00
Jason Short
dd42f06275
Cleanup
2012-01-07 22:27:26 -08:00
Jason Short
3cf77729ef
Disabled stable mode wind comp by default for release
2012-01-04 09:28:38 -08:00