Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,220 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

1958 Commits

Author SHA1 Message Date
Andrew Tridgell 3b2609c441 DCM: separate out the omega_yaw_P from omega_P 
this cleans up the separation of drift rates and proportional
correction from yaw source and accelerometers, allow the yaw
to run at a different rate to the accel correction
 2012-03-10 10:34:33 +11:00
Andrew Tridgell bcb7196680 IMU: added get_gyro_drift_rate() interface 
this just calls down to the InertialSensor layer
 2012-03-10 10:34:33 +11:00
Andrew Tridgell 9296ac494d AP_InertialSensor: added a get_gyro_drift_rate() interface 
this returns the expected max drift rate for the particular type of
gyro being used
 2012-03-10 10:34:33 +11:00
Andrew Tridgell 882fa1818b DCM: removed the limit on linear acceleration 
we get linear accelerations of more than 1g when turning corners
 2012-03-10 10:34:33 +11:00
Andrew Tridgell 801a442ffb Quaternion: minor tuning 2012-03-10 10:34:33 +11:00
Andrew Tridgell 3344869285 DCM: minor tuning based on testing my quad 2012-03-10 10:34:33 +11:00
Andrew Tridgell dffb435aac SITL: make the yaw match the APM conventions 2012-03-10 10:34:33 +11:00
Andrew Tridgell 2673614f6d SITL: fixed the pwm output on startup 2012-03-10 10:34:33 +11:00
Andrew Tridgell 982712d58f Quaternion: code cleanups and added comments 2012-03-10 10:34:32 +11:00
Andrew Tridgell f405477875 DCM: code cleanup and added more comments 2012-03-10 10:34:32 +11:00
Andrew Tridgell 9dc08b30cd Quaternion: bumb up gyro drift limit to match DCM 2012-03-10 10:34:32 +11:00
Andrew Tridgell f9394f8068 ADC: removed the ADC level accel smoothing 
the quaternion code does a better job of handling this noise than this
filter does
 2012-03-10 10:34:32 +11:00
Andrew Tridgell 8b40c44522 Quaternion: separate out drift correction from main updates 2012-03-10 10:34:32 +11:00
Andrew Tridgell 3e960f8ef9 InertionSensor: update for new Ch6() interface 2012-03-10 10:34:32 +11:00
Andrew Tridgell 919874f2a0 IMU: fixed a warning 2012-03-10 10:34:32 +11:00
Andrew Tridgell 4dff78b9c0 GPS: expose last_fix_time 2012-03-10 10:34:32 +11:00
Andrew Tridgell 6eff9107ea Compass: change last_update to be in microseconds 2012-03-10 10:34:32 +11:00
Andrew Tridgell a0a360f955 ADC: use floats for ADC averaging 
this costs almost nothing and improved accel/gyro calibration
 2012-03-10 10:34:32 +11:00
Andrew Tridgell 045b49c4c4 DCM: removed update_DCM_fast 
this combines the functionality of the 'fast' DCM with the normal one,
and also speeds up both the yaw drift correction and the matrix update
code
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 321200ebbc AP_IMU: fixed led flashing in gyro cal 
thanks Pat!
 2012-03-10 10:34:31 +11:00
Andrew Tridgell a92fb67b70 AP_Math: expanded the math test suite 2012-03-10 10:34:31 +11:00
Andrew Tridgell 4d65cda0ea AP_Math: added quaternion->matrix and earth frame routines 
this will be used for 3d acceleration
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 8abbbe5713 AP_Math: better way of handling safe_sqrt() 
better to test the result, than predict it
 2012-03-10 10:34:31 +11:00
Andrew Tridgell ccada2e9c2 SITL: avoid parent pid code on cygwin 
this causes problems on windows
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 3666476bcb SITL: prevent nested timer interrupts 2012-03-10 10:34:31 +11:00
Andrew Tridgell 3b7d78cf02 Quat: test patch for michael 2012-03-10 10:34:31 +11:00
Andrew Tridgell f363f81869 Quaternion: added NaN paranoid checking 
this is for Michael to run
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 1ec4c0777c Math: added comment on quaternion constructor 2012-03-10 10:34:30 +11:00
Andrew Tridgell f5e6dc0757 Math: added is_inf() on vector3f 2012-03-10 10:34:30 +11:00
Andrew Tridgell 066a513758 Quaternion: added more numerical safety in the quaternion code 
prevent infinities from creeping in and prevent large drift changes
 2012-03-10 10:34:30 +11:00
Andrew Tridgell c7d5f06b21 AP_Math: added quaternion helper functions and a test suite 2012-03-10 10:34:30 +11:00
Andrew Tridgell f70dfe440d Quaternion: fix the gyro bias in centripetal and remove smoothing 
the centripetal code needs to take account of the current gyro
bias.

It turned out that the accel and gyro smoothing was causing
significant control lag, and we're better off just letting the
quaternion code handle it via its own smoothing parameters
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 47ddd4dfdd SITL: disable interrupts during register updates 
this may prevent bogus mode channel reads
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 7256652de5 Quaternion: use GPS to correct for linear acceleration 
this gives much better pitch estimates. We should do this with the
airspeed sensor if available.
 2012-03-10 10:34:30 +11:00
Andrew Tridgell c7ef72cf28 Quaternion: don't update if we have a very long deltat 
this can be caused by stopping the system in a debugger
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 6d356b6c6e Compass: fixed last_update time for HIL compass 2012-03-10 10:34:30 +11:00
Andrew Tridgell ebc55bb494 RC: disable interrupts when reading the RC registers 
this prevents getting bogus values which could cause a flight mode
change
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 57f67ca6e3 GPS: added an acceleration estimate to the GPS driver 
This uses the GPS ground speed to estimate acceleration
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 7fbfcc2721 GPS: fixed some stdint types 2012-03-10 10:34:29 +11:00
Andrew Tridgell e699e9ace0 Quaternion: added in reporting of gyro drift and rp/yaw errors 2012-03-10 10:34:29 +11:00
Andrew Tridgell 2a8b167d95 fixed comment 2012-03-10 10:34:29 +11:00
Andrew Tridgell c73c55aa90 DCM: fixed an uninitialised variable warning 2012-03-10 10:34:29 +11:00
Andrew Tridgell d8234882d4 Quaternion: tweak the quaternion gains a bit 2012-03-10 10:34:29 +11:00
Andrew Tridgell cc887949c9 AP_IMU: improved the gyro calibration code 
this should give a much more accurate result
 2012-03-10 10:34:29 +11:00
Andrew Tridgell ffa6786697 Quaternion: drop the gyro drift rates down 
this should allow us to cope with noise more readily
 2012-03-10 10:34:29 +11:00
Andrew Tridgell bee4bd9474 DCM: fixed bug in accel averaging 
sorry Randy!
 2012-03-10 10:34:29 +11:00
Andrew Tridgell 25e5ddeaa4 AP_Quaternion: fixed build on Arduino 1.0 2012-03-10 10:34:29 +11:00
Andrew Tridgell c369d9f60a AP_Quaternion: added DCM compatibility interfaces 
useful for getting the code going quickly
 2012-03-10 10:34:29 +11:00
Andrew Tridgell 6138f31cec AP_IMU: added new_data_available() interface 2012-03-10 10:34:29 +11:00
Andrew Tridgell a9dea35310 AP_InertialSensor: added new_data_available() interface 2012-03-10 10:34:28 +11:00
Andrew Tridgell c80ec9a55c AP_ADC: added new_data_available() interface 
returns true if more samples are available
 2012-03-10 10:34:28 +11:00
Andrew Tridgell c8a459ab0d fixed deltat in quaternion 2012-03-10 10:34:28 +11:00
Andrew Tridgell a791224d07 SITL: make SITL not depend on DCM 2012-03-10 10:34:28 +11:00
Andrew Tridgell 74eef7018a Quaternion: added an AP_Quaternion library 
this is for experimenting with the Madgwick quaternion system, to see
if it is more or less noise sensitive than DCM
 2012-03-10 10:34:28 +11:00
Andrew Tridgell fd2a24f8ed SITL: reduce the simulated compass offsets 
this was causing us problems in getting DCM right
 2012-03-10 10:34:28 +11:00
Andrew Tridgell bddc6ba241 SITL: separate out drift speed and drift level 2012-03-10 10:34:28 +11:00
Andrew Tridgell 25cad09746 SITL: added a drift_level multiplier 
this makes it easier to experiment with different gyro drift levels
 2012-03-10 10:34:28 +11:00
Andrew Tridgell b11b571778 DCM: fixed the averaging of accel values for update_DCM_fast() 
this should improve drift correction for ArduCopter
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 145fc91701 AP_Math: added a .zero() method to Vector3f 2012-03-10 10:34:28 +11:00
Andrew Tridgell ae51173656 SITL: fixed delay() to account for signal interrupions 
when a timer went off we stopped the delay() code
 2012-03-10 10:34:28 +11:00
Andrew Tridgell fe173227de DCM_Test: fixed example code to work with SITL 
this also fixes the compass setup
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 8424609924 SITL: push noise level to 2.0 for DCM testing 2012-03-10 10:34:27 +11:00
Andrew Tridgell 6ba6e11e7b DCM: added a small amount of accel smoothing to update_DCM_fast() 2012-03-10 10:34:27 +11:00
Andrew Tridgell 3b1782f369 DCM: don't use the z accel sensor for drift correction 
the z accel is the noisest, and seems to do more harm than good. Using
just x and y is sufficient for drift correction by assuming the vector
length
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 4031320f7c DCM: added a small amount of gyro and accel smoothing 
possibly not needed, but convenient to be able to test with different
values
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 94d0236b97 DCM: added reporting interfaces for DCM state 2012-03-10 10:34:27 +11:00
Andrew Tridgell 772c30ba86 SITL: added sitl_simstate_send() 
used to report simulator state in logs
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 9df332f0ae MAVLink: import new message types DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell cc8278c1ac DCM: got rid of _error_roll_pitch from object state 
this can be a local error variable in common with the yaw code. This
saves 12 bytes in the object.
 2012-03-10 10:34:27 +11:00
Jason Short 486c56ce41 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short e57b91c2e2 Updated on Barometer - increased the Temp filtering and decreased the pressure filtering to and get less temp noise, faster response from pressure. I'm filtering the Climb rate differently now, so this higher pressure noise should not hurt the derivative calcs at all now. 2012-03-06 20:55:35 -08:00
rmackay9 6c3cf9ad5b AP_RC - removed unused library 2012-03-04 18:21:52 +09:00
Andrew Tridgell 73dafe537e SITL: use the new noise model 
use the new noise model at a low level for master until we sort out
DCM noise handling
 2012-03-02 18:31:07 +11:00
Andrew Tridgell 5f749325f0 APM_RC: allow the fast RC speed to be passed as a parameter 
this will allow users to test different speeds
 2012-03-02 17:57:08 +11:00
Andrew Tridgell f4329d2680 AP_Param: ensure we can't have duplicate keys in Parameters.h 
this is O(n^2), but only at startup, and takes less than 1ms to run.
It catches a very nasty coding error
 2012-03-02 15:48:28 +11:00
Andrew Tridgell 1e8d98cdda I2C: added lockup_count() interface 
used for reporting I2C problems
 2012-03-02 15:48:27 +11:00
Andrew Tridgell 37275d229d SITL: implement cli()/sei() properly for desktop build 
this disables simulated hardware interrupts during critical sections
 2012-03-02 15:48:27 +11:00
Jason Short 41b435a487 Updated fastPWM to 490Hz 2012-02-29 22:17:38 -08:00
Pat Hickey 337af0c7a2 AP_Param: nested group recursion into next_group disableable by macro 
* c.f. 0251932c81fe7eb, e5515bb6ef82
 2012-02-29 19:48:43 -08:00
Pat Hickey 2648694489 AP_Param: One more nexted group recursion disableable by macro 
* c.f. e5515bb6ef82
 2012-02-29 18:48:54 -08:00
rmackay9 fa34ac076e AP_Compass - fixed compile warning 2012-02-29 22:57:35 +09:00
rmackay9 d81c951849 AP_Baro - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:46:29 +09:00
rmackay9 c819a0f68a AP_Compass - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:45:49 +09:00
rmackay9 5026b5c192 AP_DCM - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:45:26 +09:00
rmackay9 82f81295a7 RC_Channel - fixed small compiler warning 2012-02-29 22:44:29 +09:00
rmackay9 c444cdb3f4 AP_ADC - removed small compiler warning 2012-02-29 22:43:46 +09:00
Pat Hickey eac8b66385 AP_Param: Make nested group recursion disableable by macro 
* Eliminates recursive calls inside AP_Param.
  This is important to Pat @ Galois, but not the project in general.
  Recursion depth on these functions is bounded structurally using
  existing nested group constructors (can't create loops in finite space)
  and checked at init time
 2012-02-28 16:28:27 -08:00
rmackay9 2b6a10d18b AP_RangeFinder - changed example sketch to work with new Filter library 2012-02-28 21:02:10 +09:00
rmackay9 033347f8ee Filter - updated example sketch to use modified library 2012-02-28 21:01:35 +09:00
rmackay9 645fda2fb2 Filter - added AverageFilter, removed SumFilter 
added FilterWithBuffer to allow removal of malloc/free without losing ability to pass around filter objects
 2012-02-28 21:01:11 +09:00
Andrew Tridgell cb52b6c6d9 AP_Param: show numerical value in eeprom dump utility 2012-02-28 09:43:49 +11:00
Andrew Tridgell a432232db9 AP_Param: fixed v.load() on a sub-element of a AP_Vector3f 
this isn't actually used at the moment in APM, but we should get it
right in case someone does try to load a single element of a vector
 2012-02-28 09:43:49 +11:00
Andrew Tridgell 39797c6f33 SITL: simulate noise on each ADC channel separately 
scale the noise based on the period of the motors
 2012-02-28 09:43:49 +11:00
Andrew Tridgell efe5c0142c SITL: raise the ADC noise level to 8 bits when flying 
this is about the level of noise of a aircraft that has a lot of
vibration
 2012-02-28 09:43:49 +11:00
Andrew Tridgell cd4fcb694e IMU: removed unused accel_filtered code 2012-02-28 09:43:49 +11:00
Andrew Tridgell 87a6d97f7b AP_Param: fixed setting of CAM_P_G in ArduCopter 
the variable CAM_P_G has the same prefix as the CAM_P group. We want
to allow for parameters having a common prefix with a group, so we
need to keep searching after we've found a group that matches the
prefix
 2012-02-27 10:54:33 +11:00
Andrew Tridgell fa443bd928 AP_Param: make the templating code a bit clearer 
add comments on the arguments, and name them in a clearer way
 2012-02-27 10:54:33 +11:00
Andrew Tridgell eb35e0e8ac DCM: fixed the sense of the compass GPS test in initial yaw 
we were only disabling null offsets when we didn't have a compass,
which doesn't make much sense!
 2012-02-26 22:24:45 +11:00
rmackay9 297d2ae457 ModeFilter - corrected shadowed variable compiler warning for drop_high_sample 2012-02-26 17:57:28 +09:00
rmackay9 b9b88ba237 Filter - added AverageFilter - this will be used in place of SumFilter because it removes the possibility of overflows 2012-02-26 17:34:36 +09:00
rmackay9 f53ff8de97 Filter - removed shadowing of variables in constructors for Filter, ModeFilter and SumFilter (sorry tridge!) 
increased maximum sample buffer size from 6 to 10
 2012-02-26 17:17:46 +09:00
rmackay9 74f7d7a1c0 ModeFilter - remove older ModeFilter library (new library is now in Filter directory) 2012-02-26 15:36:23 +09:00
rmackay9 f264e29814 AP_RangeFinder - cut over to use new ModeFilter from Filter library 2012-02-26 15:34:50 +09:00
rmackay9 c14d7768f7 Filter - first version of filter library include ModeFilter 2012-02-26 15:34:05 +09:00
rmackay9 952e5d7bbc AP_Mount - #include FastSerial first to allow it to compile under Arduino 1.0 2012-02-26 15:31:56 +09:00
Andrew Tridgell d0a6359b37 Compass: use constructor to set initial values for _learn and _use_for_yaw 
this ensures they are set if you have MAG_ENABLE==0
 2012-02-25 17:36:31 +11:00
Andrew Tridgell 900388a85a DCM: disable compass null offsets when setting initial yaw 
we need to ensure the compass null offsets code doesn't see a sudden
yaw change, or it will change the offsets by a large amount very
suddenly
 2012-02-25 16:02:24 +11:00
Andrew Tridgell f59297d7a7 Compass: catch the case of a user enabling a compass mid-flight 
if a compass has not been initialised at startup we can't enable it
mid-flight, as we don't have the orientation
 2012-02-25 14:51:09 +11:00
Andrew Tridgell eb71b26d3f DCM: use the new use_for_yaw() compass method 2012-02-25 14:51:09 +11:00
Andrew Tridgell 664622523d Compass: added COMPASS_LEARN and COMPASS_USE parameters 
these allow you to control if the compass should be used for yaw and
if it should learn its offsets. This is useful for locking in compass
offsets once they are confirmed to be good, and for learning offsets
without using them in flights.

The default is to behave the same as previously, which is
COMPASS_LEARN=1 and COMPASS_USE=1
 2012-02-25 14:51:08 +11:00
Andrew Tridgell f10097a6d5 AP_Param: added some comments on AP_Vector3f handling 2012-02-25 11:37:20 +11:00
Andrew Tridgell 5e2fbdb6cf DCM: don't reset _have_initial_yaw for GPS heading unless very slow 
wait till we reach 1m/s before we reset _have_initial_yaw. This
prevents us continually resetting the DCM matrix if our ground speed
is close to 3m/s.
 2012-02-25 11:37:20 +11:00
Andrew Tridgell 2e9105c68a AP_Param: added special handling for Vector3f 
We would like to be able to use Vector3f as a parameter while exposing
the individual elements of the vector as MAVLink parameters. This
change to AP_Param makes that possible, by giving AP_Vector3f a dual
personality
 2012-02-25 11:37:20 +11:00
Andrew Tridgell d6bfceef7c SITL: added -C option to desktop mode 
this allows running APM to stdout, which is useful for test sketches
 2012-02-25 11:37:20 +11:00
Andrew Tridgell 54aa8297af libs: removed unused library GPS_IMU 2012-02-25 11:37:20 +11:00
Andrew Tridgell 185ab5aea9 libs: removed unusued library GCS_SIMPLE 2012-02-25 11:37:20 +11:00
Andrew Tridgell 55e33c3359 DCM: tidy up use of error_course and in_motion 
in_motion is not a good name now it is also used for the compass

The error_course and heading component values don't need to be part of
the DCM object, they can be on the stack to reduce the memory usage a bit
 2012-02-25 11:37:20 +11:00
Andrew Tridgell ab8cc3d478 DCM: use rotation_matrix_from_euler() to calculate initial yaw 
When we first get a compass reading or we first start motion we need
to setup the DCM matrix with the right yaw. This uses
rotation_matrix_from_euler() to get a DCM matrix corresponding to our
current roll/pitch, but with the correct yaw
 2012-02-25 11:37:20 +11:00
Andrew Tridgell ddeda1c367 DCM: use rotation_matrix_from_euler() in matrix reset 
this makes the code a bit easier to read
 2012-02-24 11:54:11 +11:00
Andrew Tridgell 06f37aad75 DCM: use calculate_euler_angles() to get eulers from DCM 
this makes the code a bit easier to understand
 2012-02-24 11:52:55 +11:00
Andrew Tridgell 16ed8bc8f6 AP_Math: added rotmat <-> euler functions 
these will make the dcm matrix manipulation easier to understand
 2012-02-24 11:52:55 +11:00
Andrew Tridgell c354879f1f Compass: ensure we don't produce NAN values for compass heading 
this leaves the previous heading values alone if we are at a pitch of
exactly 90 or -90, at which point we can't compute a meaningful
heading
 2012-02-24 11:52:55 +11:00
Andrew Tridgell 17d16bc8c6 AP_Math: added safe_sqrt() function 
this function will never return NAN. It will return zero for negative
numbers.
 2012-02-24 11:52:55 +11:00
Andrew Tridgell bad653f230 DCM: tidy up the nan checking in DCM 
use is_nan() on the matrix rather than just on c.x, and add
safe_asin() to the (unused) OUTPUTMODE==2 code.
 2012-02-24 11:52:55 +11:00
Andrew Tridgell c8e6d03c67 DCM: added matrix recovery on reset 
when we get a bad DCM error we can recover a matrix corresponding to
the current attitude, making it more likely that the aircraft will be
able to recover
 2012-02-24 11:52:55 +11:00
Andrew Tridgell 502fbf6e17 AP_Math: added a safe_asin() function 
this adds range checking to asin()
 2012-02-24 11:52:55 +11:00
Andrew Tridgell 17170da96e AP_Math: added is_nan() methods to vector3f and matrix3f 2012-02-24 11:52:55 +11:00
Jason Short b094f6ce52 added set integrator 2012-02-23 09:38:08 -08:00
Andrew Tridgell ef90f336d3 DCM: changed the sense of floating point range comparison 
This allows us to detect NaN, otherwise NaN values were considered 
'in range'
 2012-02-23 11:41:26 +11:00
Andrew Tridgell 57ffd00b69 DCM: range check the matrix before calculating pitch 
The asin() in the pitch calculation can only take values between -1
and 1. This change ensures that the value is in range, and if it isn't
then we force a normalization. If that fails we reset the matrix
 2012-02-23 08:16:08 +11:00
Andrew Tridgell 2bb58db3f7 DCM: reset more values on renorm blowup 
when DCM blows up, we need to reset a lot more variables to ensure
that any NaN values don't persist
 2012-02-23 08:16:08 +11:00
Andrew Tridgell 156d98cb9f DCM: remove the taylor expansion optimisation for renormalisation 
The sqrt() costs about 44usec on a 2560, which is small enough for us
not to worry about the speed.

This also changes the range of values where we declare a blowup to
much less likely, which means we can cope with larger delta_t glitches
 2012-02-23 08:16:08 +11:00
Andrew Tridgell 53b87229ff AP_Param: added ParamToken type for variable list traversal 2012-02-19 17:05:28 +11:00
Jason Short 1e37a0ec17 added a limit to range output 2012-02-18 21:08:17 -08:00
Randy Mackay 33aa6fe13b Optflow - added reference to FastSerial to resolve compile error on Arduino 1.0. 
also removed reference to DCM (no longer required) and removed some old code.
 2012-02-18 18:09:40 +09:00
Andrew Tridgell 9793d04ed1 SITL: increase the amount of noise in the simulated ADC 
this increases the noise to 2 bits, which actually can have the effect
of improving accuracy, as it leads to better averaging
 2012-02-18 19:27:15 +11:00
Andrew Tridgell d52cb7e574 DCM: only add in centripetal accel if we have GPS lock 
if we don't have a GPS or the GPS doesn't have a good lock then we
can't rely on the ground speed for adjusting the acceleration vector
 2012-02-18 19:27:15 +11:00
Andrew Tridgell baac883eb1 IMU: move _sensor_cal to general IMU class 
this makes it available both in shim and INS subclasses
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 882cd4ea83 AP_Param: moved AP_Vector3f and AP_Matrix3f declarations to AP_Math.h 
this avoids us needing AP_Math.h in every utility sketch and example
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 4b15b63d21 AP_Param: fixed copy-assignment operators for AP_Param vectors 2012-02-18 10:51:57 +11:00
Andrew Tridgell 7f3858cb7f AP_Param: added a set_and_save_ifchanged() method 
this can be used to avoid the scan() in more frequenctly saved
variables, such as the MAVLink stream rates in APM
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 80a6773b8b AP_Param: added an initialised() method 
this will be used by the compass code
 2012-02-18 10:51:57 +11:00
justinbeech 62b104cbfa Found free extra 256 bytes of RAM eliminate _clz use from libgcc 
Believe it or not, changing / 2^31 to >>31 saved 256 bytes in the "d" segment.

The reason is that GCC version prior to 4.3.5 does not have a count_leading_zeros (clz) assembler macro, so it uses a 256 byte lookup table called _clz
The _clz table gets pulled in if you do 64 bit division.
This tiny change is the only place that we do long long division.
Changing to a shift saves 256 bytes of ram.
 2012-02-17 09:46:05 +00:00
Jason Short 24ce02c6a4 made I term return in same pattern as D term 2012-02-16 22:09:22 -08:00
Andrew Tridgell 79d622939a ADC: on channel overflow we should not zero last_ch6_micros 
this happens every 64 seconds because of unused channels on the
ADC. Zeroing this creates a bad delta_t value for the DCM code.
 2012-02-16 17:48:36 +11:00
Jason Short 026e4a6567 change constant to float 44330.0 2012-02-15 09:10:14 -08:00
Michael Oborne 2f81776b0d eedump ap param in perl 2012-02-15 21:31:58 +08:00
Andrew Tridgell a48a118128 SITL: adjust the SITL compass code to have saner z values 2012-02-15 22:34:16 +11:00
Andrew Tridgell 62326c0f72 Compass: enable compass offsets for HIL compass 
this makes the null_offsets algorithm have an effect for the HIL
compass that is used for SITL, which makes for easier testing of
compass calibration
 2012-02-15 22:33:50 +11:00
Andrew Tridgell 048aed5427 fixed dump size 2012-02-15 10:44:09 +11:00
Andrew Tridgell 089db43183 show group_element too 2012-02-15 10:42:21 +11:00
Andrew Tridgell ea6a46fc9b AP_Param: added eeprom_aaparam.c dump utility 2012-02-15 10:41:06 +11:00
Andrew Tridgell 4398171374 SITL: catch floating point errors 
if we get a FPE then log a message and exit
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 245d265c6a DCM: added a SITL_debug() for DCM normalisation errors 
I have seen normalisation errors during simulation runs, but have not
yet tracked down the cause. This log message may help track things
down.
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 601a991a46 added SITL_debug() macro 
this can be used to print a message into the logs in the SITL
simulator. This will be used for critical conditions.
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 085cc00c33 RC_Channel_aux: fixed a uninitialied variable error, and save a bit of stack space 2012-02-15 08:50:45 +11:00
Andrew Tridgell 43c56be70c SITL: add some magnetometer offsets 
this ensures the compass null_offset algorithm has some work to do in
autotest
 2012-02-14 11:26:42 +11:00
Andrew Tridgell f95d7cadc5 fixed SITL GPS heading to be 0..360 2012-02-14 11:26:42 +11:00
Andrew Tridgell 6a42598ade use stdint types in the compass code 2012-02-14 08:35:03 +11:00
Andrew Tridgell be5ffdedbb AP_Param: allow dumping of AP_Vector3f 
this means the 'show' command in the CLI shows the compass offsets now
 2012-02-14 08:34:50 +11:00
Andrew Tridgell d90dc4d893 GPS: change back to 4Hz for MTK GPS 
this will hopefully fix the NO_GPS problems that have been regularly
happening in recent months. I will watch the logs carefully to see if
the problem recurs
 2012-02-13 22:50:20 +11:00
Andrew Tridgell 804332c340 AP_Baro: fixed some signed/unsigned warnings 
and a potential bug on timer wrap
 2012-02-13 21:39:18 +11:00
Andrew Tridgell 74bbc72b11 move AP_Var code and example into libraries/AP_Var 
you can use AP_Var by defining USE_AP_VAR
 2012-02-13 16:22:53 +11:00
Andrew Tridgell 23ed5c2cee fixed imax load/save in PID 2012-02-13 16:22:53 +11:00
Andrew Tridgell 37cabb4cfa fixed dead zone load/save 2012-02-13 16:22:53 +11:00
Andrew Tridgell 150a67c262 fixed PID initialisation 2012-02-13 16:22:53 +11:00
Andrew Tridgell 47807ec68d RC_Channel_aux: catch invalid function settings 
a bad function setting would overwrite the heap
 2012-02-13 16:22:53 +11:00
Andrew Tridgell 1f05e7dafb fixed types in GPS detect code 
using int everywhere is wasteful and non-portable
 2012-02-13 16:22:53 +11:00
Andrew Tridgell d55a0c3a71 added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 9175ebe33a change back to 256 max variables in _var_info[] 
this keeps the header to 24 bits, and allows the token to be 16
bits. If we need more variables we can put them in a nested group.
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 9c5a5473ab added indexes to group info structures 2012-02-13 16:22:52 +11:00
Andrew Tridgell f2a6a31645 AP_Param: added group idx, and change packing of header elements 
adding a idx element to the GroupInfo will make it less likely that a
developer will change the IDs of group elements, and make it easier to
see that these IDs are important for identifying a variable in EEPROM

The header packing has changed to make it 24 bits on all platforms,
which allows us to lower the EEPROM variable max size to 1024 bytes
again
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 678a1df3be fixed support for AP_PARAM_SPARE 
spare group elements are needed if we remove a group parameter
 2012-02-13 16:22:52 +11:00
Andrew Tridgell accaf9bb30 fixed build on arduino 1.0 2012-02-13 16:22:52 +11:00
Andrew Tridgell db96303fa0 convert APM_PI library to AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell 452749149f convert AC_PID library to AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell f9eed9bd9e fixed missing return in D value 2012-02-13 16:22:52 +11:00
Andrew Tridgell f760b3c717 restore _fCut that was lost in AP_Param development 2012-02-13 16:22:51 +11:00
Andrew Tridgell 84aef17bb0 fixed initialisation of RC_Channel class 2012-02-13 16:22:51 +11:00
Andrew Tridgell 5418302b38 AP_Param: fixed desktop build 2012-02-13 16:22:51 +11:00
Andrew Tridgell d658bc6f9d desktop: more progmem string functions 2012-02-13 16:22:51 +11:00
Andrew Tridgell 95e107ab75 AP_Param: added generic cast_to_float 2012-02-13 16:22:51 +11:00
Andrew Tridgell 9509c69f42 AP_Param: disable debug ready for production 2012-02-13 16:22:51 +11:00
Andrew Tridgell 5d03f13aa5 AP_Param: make ptype in first() and next() optional 2012-02-13 16:22:51 +11:00
Andrew Tridgell e01af5885f adapt Mavlink_compat.h to AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell bf4a77da81 convert libraries to new typesafe macros 2012-02-13 16:22:51 +11:00
Andrew Tridgell e8c4ecf9fa added nested group support and validation 2012-02-13 16:22:51 +11:00
Andrew Tridgell 94a86204ee added size of Vector6f 2012-02-13 16:22:51 +11:00
Andrew Tridgell 12dac42174 modify RC_Channel for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell e5a0074312 modify the PID library for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell e5f3864f81 modify the IMU code for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell 8c58d95187 modify the compass code for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell 497a400841 hacks to get AP_Param to compile 2012-02-13 16:22:50 +11:00
Andrew Tridgell 5b842a447f new AP_Param subsystem 2012-02-13 16:22:50 +11:00
justinbeech 69f1613f2c Uncommented cold temp compensation after testing. Fixed read throttle so read rate ends up nailing 100hz, not 90hz. minor commenting improvements. 2012-02-13 00:00:06 +00:00
analoguedevices 0ea6ecf8d1 Removed outdated comment: 
"	// deadzone moved to
		//control_in = (abs(control_in) < _dead_zone) ? 0 : control_in;"
 2012-02-11 16:51:02 +00:00
Michael Oborne 8ec192cf45 fix uint > int issue - for hil 2012-02-11 11:35:59 +08:00
Pat Hickey 83326a9d62 APM_RC_APM2: Add support for CH_10 and CH_11 
* CH_10 is on APM2 pin A10 (based on A1..A8 convention)
* CH_11 is on APM2 pin A11

* Only the code in enable_out, disable_out, and OutputCh needed to change.

* CH_10 and CH_11 always have an output period of 20ms (50Hz).
 2012-02-06 22:11:01 -08:00
Randy Mackay 6877b8b3d6 AC_PID Library - added example sketch 2012-02-05 17:35:15 +09:00
Randy Mackay 90b39609c6 APM_PerfMon - removed because it's too big to use with our limited memory now anyway! I have a backup in case we need to resurrect it in the future. 2012-02-05 11:11:59 +09:00
Jason Short af79eb273f Added D term to APM_PI - need to refactor this as a parent class and two child classes to save code space, remove dupes 2012-01-28 21:21:43 -08:00
Randy Mackay 9c26e2369e Arduino 1.0 - GPS_IMU - small fix to make it compile. Does anyone use this lib?! 2012-01-28 17:56:56 +09:00
Randy Mackay 8533aaf5d9 AP_PID, AP_RC_Channel, FastSerial - small changes to make example sketches compile again 2012-01-28 17:54:20 +09:00
Randy Mackay b7ce7bfe18 Arduino 1.0 - small fix to make AP_Baro_MS5611_test.pde compile under Arduino 1.0 2012-01-28 13:21:35 +09:00
Randy Mackay cf25bbfa74 AP_ADC library - tiny fix to make example sketch work after some changes to AP_PeriodicProcess library 2012-01-28 13:12:19 +09:00
Randy Mackay ed19c25a97 Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h". 
Modified FastSerial's write function to return size_t (number of bytes written).
 2012-01-28 12:25:47 +09:00
Randy Mackay a8b3d2f063 OpticalFlow - fixed minor compiler warnings and moved chip select to A3 for APM2 2012-01-26 23:35:49 +09:00
Randy Mackay 8dee001657 Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Randy Mackay 99506accf4 Optical Flow - added overflow check 2012-01-25 21:45:52 +09:00
Pat Hickey 9195006541 APM_RC examples: add calls to enable_out after init 2012-01-24 09:09:08 -08:00
Andrew Tridgell 9c1e257826 fixed example in PID library 2012-01-23 08:47:46 +11:00
Pat Hickey 602d56304a APM_RC: PWM outputs are disabled by default on init 2012-01-22 12:03:11 -08:00
Pat Hickey 276913a950 APM_RC enable_out and disable_out added to APM1 and APM2 
* Outputs still enabled by default
 2012-01-22 12:03:11 -08:00
Jason Short 94e7ba8df2 Removed Gyro filter, In the end it doesn't help and I think it could actually hurt gyro integration. 2012-01-20 22:52:29 -08:00
Michael Oborne 6b949511ca change rc norm_output to scale evenly across the entire range 2012-01-20 16:24:55 +08:00
Andrew Tridgell 0dc0d9ddf0 added a simple DCM library example 2012-01-18 21:25:19 +11:00
Andrew Tridgell 1f43cf6579 fixed Oilpan test for new library structure 2012-01-18 20:31:58 +11:00
Doug Weibel e22a83eec0 Add a CLI setup action to reset the magnetometer offsets 
Since the magnetometer offsets are not available through the MAVLink parameter interface (since they are an AP_Var vector) this little feature allows them to be reset from the CLI.  Useful if you somehow get bad offsets or if you change magnetometer.  If you have a bad set of large offset values I have seen issues with the nulling algorithm have trouble converging to the proper values.  I have never seen it have trouble converging from 0/0/0, so this could be a useful feature from time to time.
 2012-01-15 16:15:08 -07:00
Mike Smith 9c5a776456 Teach the Makefile about the new Arduino sourcefile suffix 2012-01-15 11:51:38 -08:00
Jason Short 69ffc7e115 updated channel notes 2012-01-15 10:24:15 -08:00
Andrew Tridgell 897d9a1c0b baro: fixed an integer overflow issue at high altitudes 
the averaging array was using 16 bit numbers, but we are storing
numbers with 19 significant bits. That caused overflow at high
altitude, and some very interesting altitude graphs!

Thanks to Michael Oborne for spotting this in a log
 2012-01-14 19:51:35 +11:00
Randy Mackay bcd63a9807 OpticalFlow - bug fix - highest resolution was incorrectly set as 1200 instead of 1600 2012-01-14 12:34:29 +09:00
Andrew Tridgell 15d446bde2 DCM: prevent a segmentation fault when compass is not enabled 
when compass is disabled _compass is NULL
 2012-01-13 15:48:07 +11:00
Doug Weibel 9846822748 Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
Andrew Tridgell 49cf409c23 desktop: floating point precision changes from Justin Beech 2012-01-11 21:31:59 +11:00
Jason Short e2830ca147 fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 354d9588bf sensorSign swicth 2012-01-10 23:43:44 -08:00
Jason Short b6fc8e519c AP Rangefinder had some bad characters in it. Converted and cleaned the text files. 2012-01-10 23:42:26 -08:00
Jason Short 351be7c305 Made timer unsigned 2012-01-10 23:42:26 -08:00
Pat Hickey a19afd926a APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV 
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
 2012-01-09 21:57:01 -08:00
Doug Weibel 756793611f Repair dataflash test 2012-01-08 21:29:19 -07:00
Jason Short d0af95f0e3 allows main code to manually set the integrator value 2012-01-04 09:28:36 -08:00
Andrew Tridgell ca39fc8b47 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell 60185509f4 AP_Compass: when I2c fails, don't retry for 1s 2012-01-04 16:35:47 +11:00
Andrew Tridgell 9fb3b13af3 AP_Baro: when I2c fails, don't retry for 1s 2012-01-04 16:35:16 +11:00
Andrew Tridgell 880c7e6411 DataFlash: cope with older dataflash chips 
some of the APM2 DataFlash cards use an older chip with only 4096
pages, and a density code of 6. Doug has one of these.
 2012-01-04 16:16:35 +11:00
Michael Oborne 306e2e3f7d add gps character count. 
this problem happens when the mtk ends up in nmea mode at 10hz. there is no 50ms window of no activity
 2011-12-31 13:05:33 +08:00
Michael Oborne 3d85f99546 remove gps callback in wait loop 2011-12-31 09:35:40 +08:00
Randy Mackay a2edba69b1 GPS - removed GPS_MTK, GPT_NMEA and GPS_UBLOX. All functionality moved to AP_GPS many months ago. 2011-12-30 22:25:00 +09:00
Jason Short 7adc80c513 removed newlines to clean up code 2011-12-29 23:02:01 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell 074fd31506 Baro: fixed MS5611 example sketch 2011-12-28 21:49:29 +11:00
Andrew Tridgell 820153d7ae compass: show timing in compass test 2011-12-28 21:44:18 +11:00
Andrew Tridgell f871235480 Baro: show timing in baro test 2011-12-28 21:43:52 +11:00
Andrew Tridgell 8f74631882 DCM: don't use compass unless its healthy 2011-12-28 20:41:54 +11:00
Andrew Tridgell 7c098491b9 I2C: fixed some warnings 2011-12-28 20:41:53 +11:00
Andrew Tridgell 5f38663d44 desktop: exclude I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell e1c9c063a5 MPU6k: don't init the Wire library 
we don't use Wire any more
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 7ba744a11a I2C: convert barometer library to new I2C library 
this also adds a healthy attribute and error checking
 2011-12-28 20:41:53 +11:00
Andrew Tridgell acf4e9b61d I2C: convert compass code to new I2C library 
this also adds a healthy attribute, and error checking on all I2C
calls
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 8ee336e715 I2C: imported the I2C library from Wayne Truchsess 
this gives us a more robust interface, including timeouts
 2011-12-28 20:28:31 +11:00
Andrew Tridgell e7dab19260 TimerProcess: prevent a race in setting up the timer callbacks 2011-12-28 16:00:49 +11:00
Andrew Tridgell 5e4f66e525 DataFlash: moved high level logging logic to library 
this moves out all the high level logic from ArduPlane/ArduCopter to
the library. It also adds a "config page", as the last page in the
flash. This is used to check if the flash needs erasing. We only erase
now if the DF_LOGGING_FORMAT has changed.

This patch also adds a public CardInserted() method, which is used to
disable logging on APM2 if a dataflash card is not inserted
 2011-12-28 16:00:48 +11:00
Andrew Tridgell bd9488f1e4 DataFlash: fixed sense of card detect 2011-12-28 16:00:48 +11:00
Andrew Tridgell 6ca613337b MPU6000: protect the driver from double initialisation 
initialising twice can lockup the driver
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 18d26dc74e MPU6000: minor fixes 
the hardware functions should be private, and cs_pin should be uint8_t
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 4d71482d1c TimerProcess: check for duplicate registrations 
if a driver gets initialised twice, make sure it doesn't get called
twice in the timer loop
 2011-12-28 16:00:48 +11:00
Andrew Tridgell dbaa6fb6d2 TimerProcess: make some variables uint8_t 
save a couple of bytes
 2011-12-28 16:00:48 +11:00
Mike Smith 3582ad4e20 Fix issue #423 - FastSerial flush bug. 2011-12-26 15:52:21 -08:00
Andrew Tridgell 637d4675e1 added in DataFlash.cpp 
forgot this ....
 2011-12-26 19:34:06 +11:00
Andrew Tridgell 9bb0bd0341 desktop: added attachInterrupt() support 2011-12-26 19:17:11 +11:00
Andrew Tridgell a39a470d75 desktop: fixed for new DataFlash inheritance 2011-12-26 19:17:11 +11:00
Andrew Tridgell 977326e991 dataflash: reworked classes to move most code to parent class 
this moves all the non-hardware specific code to the parent
DataFlash_Class class, keeping the hw specific code much smaller and
simpler.

This should prevent discrepancies creeping in between APM1 and APM2
support again
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 13b2ddcbe1 dataflash: fixed APM2 flash logging 
we had log wrap disabled on APM2, and also had the wrong log size. The
mainline code assumed 4096, but it is 8192 pages long.
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 04daeab7c0 MPU6000: change to 98Hz low pass filter 
based on recommendation from Pat
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 10ca54ef8f MPU6000: use data ready interrupt to prevent stale data 
We listen for a data ready interrupt and only read new data in read()
if there is new data
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 760aa62c75 fixed the MPU6000 test sketch 2011-12-26 19:17:11 +11:00
Randy Mackay 4620186328 Merge remote-tracking branch 'origin/master' 2011-12-25 12:34:16 +09:00
Randy Mackay c24b5229e1 AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell b72f9c2e9f added MPU6000 test sketch 
this doesn't work yet - Pat, any idea why?
 2011-12-25 12:03:39 +11:00
Andrew Tridgell f11a5edbc7 removed dead test program 
this one doesn't build, and has been replaced by IMU_MPU6000_test
 2011-12-24 18:11:04 +11:00
Andrew Tridgell 8780a60234 ADC: update for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell e7720254dd AP_Baro: update MS5611 driver for new ap_proceduce prototype 
this saves calling millis() quite so often
 2011-12-21 23:31:38 +11:00
Andrew Tridgell f97b405b56 MPU6k: update driver for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell 79d6c21dde PeriodicProcess: added set_failsafe() call 
this adds an optional failsafe function that will be called in the
timer loop
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 11b8d56434 added comment in polygon code 2011-12-21 23:31:38 +11:00
Andrew Tridgell bc9e943969 rollover is not a bug 
subtracting unsigned numbers does the right thing
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 97f8d21c1b added code format markers to AP_InertialSensor library 2011-12-21 23:31:38 +11:00
Andrew Tridgell 59d2d2d783 fixed build of IMU_MPU6000_test 2011-12-21 23:31:38 +11:00
Andrew Tridgell e7568db237 fixed comment 2011-12-19 20:52:59 +11:00
Andrew Tridgell 6efa2e53cb AP_Math: re-work polygon algorithm for perfect precision 
using sign checking and 64 bit integer math only when needed results
in an algorithm that is just as fast as the floating point version,
but has perfect results for any representable lat/lng
 2011-12-19 18:52:56 +11:00
Randy Mackay e070109e21 AP_RangeFinder - change sonar example sketch to use default Sonar PIN for APM2 (A1) 2011-12-18 14:15:50 +09:00
Andrew Tridgell a3a0e5646f polygon: improve the speed and precision of the polygon algorithm 
now takes 156 usec per test, with a 11 point boundary
 2011-12-18 12:59:50 +11:00
Michael Oborne 92886cfa10 make file relax 2011-12-17 20:42:51 +08:00
Michael Oborne f4b7aea1ee add relax 2011-12-17 16:53:14 +08:00
Andrew Tridgell bb0f179495 AP_Baro: fixed temperature on MS5611 
this caused a 2x scaling of altitude
 2011-12-17 14:58:58 +11:00
Andrew Tridgell 6341db7031 Revert "ADC: only read channels that are actually being used" 
This reverts commit 95e6bb26f4772ca8c7faa62215de6f078d3df3c7.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell d442bad413 Revert "ADC: added an enable_channel() API" 
This reverts commit dafeac01d8f14162600cf821404ba4072dcae14d.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 99eafbbe38 Revert "ADC: fixed HIL build" 
This reverts commit 86c1a6a5fdd929516cf0f64f4d610cfcd4b4f774.

ADC will now be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 10e546eebd AnalogSource: return a float from read() method 
this gives the full resolution when using the ADC backend. It also
adds scaling for the Arduino backend
 2011-12-17 07:29:09 +11:00
Andrew Tridgell f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Andrew Tridgell d4b66139dc ADC: fixed HIL build 2011-12-16 20:58:04 +11:00
Andrew Tridgell dc01d55740 added missing mavlink headers 2011-12-16 20:53:26 +11:00
Andrew Tridgell 42522baf9f geofence: store fence points as int32_t 
this keeps maximum precision in fence boundaries
 2011-12-16 20:11:51 +11:00
Andrew Tridgell a4c03cceff mavlink: include latest geofence message changes 2011-12-16 20:11:51 +11:00
Andrew Tridgell 9b6bab8904 AP_Math: better polygon algorithm 
this one seems to do better with single precision floating point
 2011-12-16 20:11:51 +11:00
Andrew Tridgell dc20d89375 MAVLink: update to latest mavlink XML 
this includes the geo-fencing messages
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 9591317dbc ADC: added an enable_channel() API 
enable_channel() must be used before the Ch6() method is called to
enable gathering of data on the required channels
 2011-12-16 20:09:40 +11:00
Andrew Tridgell c41e7c505b timer: enable interrupts during timer processing 
this prevents us losing serial bytes when we call sensor drivers that
take more than 100usec to read.

We also prevent timer recursion by re-enabling the timer after all
callbacks are complete
 2011-12-16 20:09:38 +11:00
Andrew Tridgell 09947dace1 ADC: only read channels that are actually being used 
on the APM2 we usually use none of the ADC channels, although we may
use the airspeed sensor. This change means we detect which channels
are being read, and only do the SPI transfers for those ones. That
saves us about 100usec per timer interrupt (ie. about 10% of our CPU)
 2011-12-16 20:09:35 +11:00
Andrew Tridgell f125f6619a fixed formatting of ADC driver 
it was a nasty mix of DOS and UNIX
 2011-12-16 20:09:29 +11:00
Andrew Tridgell b484411c41 timers: change to 1kHz timer by default 
we were using a 227Hz timer, which is far too slow
 2011-12-16 20:09:25 +11:00
Andrew Tridgell e187ff149f desktop: fixed type of dword eeprom read 2011-12-16 20:09:18 +11:00
Andrew Tridgell 62e92f406e AP_Math: make out vector and matrix elements used types with fixed sizes 
this prevents differences between CPU types
 2011-12-16 20:09:11 +11:00
Pat Hickey d6a8440ef2 APM_RC_APM2: Remove OutputCh from ::Init() 
* These calls were off by one anyway, by using the channel numbers
  as ints ant not CH_n macros, and that caused an ESC cal problem.
 2011-12-15 13:47:43 -08:00
Andrew Tridgell 85e295332f AP_Math: added Polygon_complete() function 
used to veryify user supplied boundaries
 2011-12-15 14:42:34 +11:00
Andrew Tridgell 117a98f9a2 AP_Math: added a Polygon_outside() function 
this tests if a point is outside of a polygon. This will be used as
part of our geo-fencing support, and also for a new 'fenced mode'
 2011-12-15 14:34:58 +11:00
Andrew Tridgell 0147c7b6c6 DCM: added matrix_reset() method 2011-12-13 21:32:50 +11:00
Andrew Tridgell a819c1a3dc IMU: abstract the setting of the LEDs in IMU initialisation 
we need this to cope with different LED pin assignments on APM1/APM2
 2011-12-13 18:19:12 +11:00
Andrew Tridgell 90c6bad814 autotest: make magnetic field point down 2011-12-12 22:14:01 +11:00
Andrew Tridgell 081f35f51c desktop: fixed build with new AP_Baro code 2011-12-12 15:14:55 +11:00
Andrew Tridgell 8d882c3640 desktop: fixed desktop barometer code 2011-12-12 15:14:55 +11:00
Andrew Tridgell 3648c81dd9 barometer: fixed HIL barometer build 2011-12-12 15:14:55 +11:00
Andrew Tridgell 5d503fd65e ADC: change adc.Ch() to return a float 
this gives us a bit more precision in airspeed measurement, and costs
us virtually nothing as we are converting to float immediately after
getting the value
 2011-12-12 15:14:55 +11:00
Andrew Tridgell 14866927e1 dcm: fixed an uninitialised variable 
if no compass and not in motion the DCM we would multiply by an
uninitialised number
 2011-12-11 15:21:10 -08:00
Pat Hickey f4aaa56b16 AP_Baro_MS5611: Asynchronous operation, plus c++ style changes. 
Yeah, I know this was a big change to make all at once.
 2011-12-11 15:21:10 -08:00
Pat Hickey d026e48032 AP_Baro : Add init( AP_PeriodicProcess * ) method to interface & implementations 
AP_Baro_MS5611 and AP_Baro_BMP085 implement the interface, with stubs only
 2011-12-11 15:21:10 -08:00
Pat Hickey a626e21e98 AP_Baro_BMP085: move apm2_hardware flag from init to constructor. 2011-12-11 15:21:10 -08:00
Pat Hickey f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey 49ca774734 AP_PeriodicProcess: AP_TimerProcess can register multiple callbacks. 2011-12-11 15:21:10 -08:00
Pat Hickey 1bfab64543 AP_Baro_BMP085: Delete commented out code 
* If its important to get old code back, thats why version control exists
 2011-12-11 15:21:09 -08:00
Pat Hickey f3270b7f13 AP_Baro_BMP085: implement AP_Baro interface 2011-12-11 15:21:09 -08:00
Pat Hickey f52453beed AP_Baro_MS5611: init must also perform SPI.begin 2011-12-11 15:21:09 -08:00
Pat Hickey 64eb1889ab AP_Baro_MS5611: CS pin is arduino pin 40 2011-12-11 15:21:09 -08:00
Pat Hickey 1832ed0355 AP_Baro_MS5611: Implement AP_Baro interface 2011-12-11 15:21:09 -08:00
Pat Hickey f0ab0318b3 AP_Baro_BMP085: Conform to AP_Baro interface. Make the rest private. 2011-12-11 15:21:09 -08:00
Pat Hickey a41b6da263 AP_Baro_MS5611: conform to AP_Baro interface 2011-12-11 15:21:09 -08:00
Pat Hickey d113992c10 AP_Baro: Create virtual interface 2011-12-11 15:21:09 -08:00
Pat Hickey fdffd69257 AP_Baro_MS5611: renamed class implementation from APM_MS5611 2011-12-11 15:21:09 -08:00
Pat Hickey c407b0d85e AP_Baro_MS5611.h: reorganized 
* moved ms5611 macros to c file
* reorganized class declaration & retabbed
* made Temp, Pres, and Alt private variables.
 2011-12-11 15:21:09 -08:00
Pat Hickey 34cebd8a3e AP_Baro_MS5611: Overwrote with Jose Julio's latest files. 2011-12-11 15:21:09 -08:00
Pat Hickey cc6837cbab AP_Baro: Export AP_Baro_BMP085 and AP_Baro_BMP085_HIL headers. 2011-12-11 15:21:09 -08:00
Pat Hickey f445ec1242 AP_Baro_BMP085(+_HIL): Rename classes from APM_BMP085 to AP_Baro_BMP085. 2011-12-11 15:21:09 -08:00
Pat Hickey 7032c32b42 BMP085 fix line endings 2011-12-11 15:21:09 -08:00
Pat Hickey 7ef146044e AP_Baro: move all APM_BMP085 files inside AP_Baro 2011-12-11 15:21:09 -08:00
Pat Hickey 9250053bfe Added AP_Baro and AP_Baro_MS5611 classes. 
Incomplete and does not work.
 2011-12-11 15:21:08 -08:00
Randy Mackay 67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Pat Hickey 56b0be3124 APM_RC: APM1 fast output speed increased to 400hz. 2011-12-10 13:06:06 -08:00
Pat Hickey 7afb091f26 APM_RC: APM2 fast output speed increased to 400hz. 2011-12-10 13:04:11 -08:00
Pat Hickey f3a4fbc7af AP_IMU_INS: Eliminate init_accel from cold start. 
* Bug reported by Jason, 10 Dec 11
 2011-12-10 13:00:54 -08:00
Randy Mackay fa0723f115 ArduCopter - removed limitation on Maxbotix sonar type requiring ADC so it can work with APM2. 
modified default analog pin in test sketch to be AN4 which is consistent with APM2 default
 2011-12-10 18:33:30 +09:00
Randy Mackay df1e54ec79 RangeFinder - fixed example sketch so it works again 2011-12-10 16:32:34 +09:00
Randy Mackay 1f53c25577 RangeFinder - small bug fix to initialise prescale variable. 
Fixed up example sketch so it compiles and works again!
 2011-12-10 16:25:41 +09:00
James Goppert 6dc236b8f2 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-07 20:59:15 -05:00
Jason Kemmerling 21c3282c9c Fixed along track bug. 2011-12-07 20:55:06 -05:00
James Goppert 2feacea1f1 Added APM2 support. 2011-12-07 19:19:30 -05:00
James Goppert a25353da79 Added AP_Board to APO 2011-12-07 16:31:56 -05:00
Jason Short 9d1f56c6da Split P and I term 2011-12-06 21:10:30 -08:00
Jason Short 9ed6463b39 Split the P and I terms in PI 2011-12-06 21:08:47 -08:00
Wenyao Xie c4203631dc APO velocity/ altitude working. 2011-12-06 19:38:23 -05:00
Wenyao Xie 2432ae130d Fixed baro. 2011-12-06 18:56:16 -05:00
Wenyao Xie 7593aae452 Fixed Barometer Altitude 2011-12-06 13:28:39 -05:00
Wenyao Xie 410c18ac05 Fixed Barometer Reading 2011-12-06 13:26:07 -05:00
Wenyao Xie 50032ef703 Working on baromemter altitude 2011-12-05 20:57:19 -05:00
Jason Kemmerling 1d9efea9af Sailboat wind measurement working. 2011-12-05 15:53:29 -05:00
Andrew Tridgell 5c99035823 fixed the desktop build 
This fixes a vtable link bug
 2011-12-05 18:06:58 +11:00
James Goppert 7fae764c55 Along track fix for negative. 2011-12-04 01:36:53 -05:00
James Goppert 98a21a70c0 Improved along track calculation for APO. 2011-12-04 01:25:14 -05:00
James Goppert f8fab5f7d6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-04 00:45:34 -05:00
Wenyao Xie fd77fe5a9d Rover live test WORKS! "Murphy's Law is a turtle" 2011-12-03 22:42:08 -05:00
Jason Short fa7f39ba20 Access to _clamp val. May want to make a private member and write accessor. 2011-12-03 17:57:12 -08:00
Jason Short e37dffadf3 Added faster conversion from and to degrees*100 / rads 2011-12-03 17:56:41 -08:00
Andrew Tridgell b4965d34a9 GPS: added FAKE_GPS_LOCK_TIME 
this allows you to fake up a GPS lock after a specific number of
seconds
 2011-12-04 09:06:57 +11:00
Wenyao Xie dac3ba48e0 Fixed apo live mode bugs for 2.0 update. 2011-12-03 15:38:37 -05:00
Wenyao Xie a802796c67 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-03 14:00:23 -05:00
James Goppert 8300c5e738 Changed BlockPIDDfb behaviour. 2011-12-03 12:13:11 -05:00
Andrew Tridgell f96a48e42b autotest: support all 11 PWM output channels 
this will allow for more complex aircraft
 2011-12-02 22:45:48 +11:00
Andrew Tridgell 66d65121cc autotest: switch to big-endian metric packets internally 
now that all the sim code is internal to the APM git repo, we can
choose saner packet formats
 2011-12-02 22:12:58 +11:00
Andrew Tridgell 43e3948816 desktop: show the full path to the desktop executable 2011-12-02 21:46:55 +11:00
Andrew Tridgell 7167fec784 desktop: added SO_REUSEADDR after accept() 2011-12-02 17:37:55 +11:00
Andrew Tridgell 706c6c38fa desktop: fixed calculation of angular velocities 
thanks to James Goppert for the frame conversion maths
 2011-12-02 17:37:54 +11:00
James Goppert b9f370e33d Commented out debugging in guide. 2011-11-29 18:08:50 -05:00
James Goppert 38c19c50be Merge branch 'master' of github.com:arktools/ardupilotone 
Conflicts:
	libraries/APO/AP_Guide.cpp
 2011-11-29 18:06:38 -05:00
James Goppert b6dcd70cf9 Working on yaw command. 2011-11-29 17:38:18 -05:00
Wenyao Xie a0824b4cbe Fixed guidance bugs in APO. 2011-11-29 17:37:42 -05:00
James Goppert 92efa90d0f APO fixes. 2011-11-29 13:59:44 -05:00
James Goppert e8d74ae3fe Fixed apo radio error. 2011-11-28 12:29:05 -05:00
James Goppert 83aceb5e8f Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-28 00:56:29 -05:00
James Goppert 715e7c84a4 Updated apo for merge with apm 2.0 changes. 
Still need to handle switches for 2.0 board in hal.
Should probably move into hal ctor.
 2011-11-28 00:53:30 -05:00
Andrew Tridgell bdb1599e96 desktop: improved the accuracy of the sensor emulation 2011-11-28 16:22:33 +11:00
Andrew Tridgell e491168273 ADC: remove a very small (0.2 degrees/s) bias in the ADC code 
small bias from integer rounding
 2011-11-28 16:22:33 +11:00
James Goppert fcb4d9cb15 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-27 23:56:17 -05:00
James Goppert 999a5892f0 Fixed mode switching. 2011-11-27 23:55:28 -05:00
Andrew Tridgell df957db8d9 desktop: setup TCP sockets as non-blocking 
the sendto() blocks unexpectedly on MacOS
 2011-11-28 13:53:57 +11:00
Andrew Tridgell 4036604fb7 mavlink: move Mavlink_compat.h to common code 
this will allow it to be used by ArduCopter
 2011-11-28 13:53:57 +11:00
Doug Weibel 997ddde7f5 Added back the feature to prompt users when an invalid CLI command is entered. 
Thanks to Yury Smirnov for this patch!
 2011-11-26 21:10:53 -07:00
Andrew Tridgell 0da5125b7f upload: force hex file format for upload 
this should fix a problem with hex file format detection on MacOS
 2011-11-27 09:36:10 +11:00
Andrew Tridgell 0720bf7bf1 desktop: build fix for fjall 2011-11-26 18:24:29 +11:00
Andrew Tridgell f2a0a49d55 desktop: fixed desktop build for strlcat_P() changes 2011-11-26 17:18:09 +11:00
Andrew Tridgell 7fa59a6849 AP_Common: added typesafe wrapper for memcpy_P() 2011-11-26 17:17:50 +11:00
Andrew Tridgell 92e0e929a4 AP_Common: replace strlcat_P() with a C implementation 
the one in the Arduino libc was giving us bogus results on one
machine, and is suspect. We couldn't spot what is wrong in the
assembler, but replacing the implementation with a C one fixes the
bug, so we replaced it
 2011-11-26 17:02:56 +11:00
Andrew Tridgell c9b0b384f7 desktop: added framerate and initial height code 
this allows the sensors to initialise before the simulator has
connected. The GPS will give a value indicating no GPS lock
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 24a7a18481 desktop: fixed swap_float() 
get indexes right
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 62f98b091f desktop: import updated DataFlash code 
this fixes a logging bug
 2011-11-25 20:00:19 -08:00
Andrew Tridgell de0c38339d desktop: fixed ADC value for airspeed 2011-11-25 20:00:19 -08:00
Andrew Tridgell 02f25ac36d libraries: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 2b7e0c8494 DataFlash_Purple: added new logging methods needed for ArduPlane 
builds, but not tested yet
 2011-11-25 20:00:18 -08:00
Andrew Tridgell cba93dbd43 DataFlash_APM1: re-add defines lost from merge 2011-11-25 20:00:18 -08:00
Andrew Tridgell 0ee654d6bf desktop: fixed desktop build 
vtable error
 2011-11-25 20:00:18 -08:00
Andrew Tridgell de2898e5db desktop: normalise roll and pitch rates 2011-11-25 20:00:18 -08:00
Andrew Tridgell 91b03a48c1 desktop: added SKETCH as a define 
useful for automatically handling copter vs plane
 2011-11-25 20:00:18 -08:00
Andrew Tridgell ffba37d599 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Pat Hickey b8c44d2fc0 APM_RC: _set_speed functions implemented for APM_RC_APM1 and _Purple 
* I have not tested any of these on real hardware.
 2011-11-25 20:00:18 -08:00
Pat Hickey ea4c220ee9 APM_RC: OCR register init moved from ArduCopter/radio.pde to lib inits. 2011-11-25 20:00:18 -08:00
Andrew Tridgell 6093db948b compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 18986d1d9f barometer: fixed for purple build 2011-11-25 20:00:18 -08:00
Andrew Tridgell 0601f7e8ce barometer: support 'make purple' for barometer example code 2011-11-25 20:00:18 -08:00
Andrew Tridgell 41caa949ca fixed InertialSensor stub build 2011-11-25 20:00:18 -08:00
Pat Hickey d2a0bd35f4 hil-sensors: added stub libraries for InertialSensor and PeriodicProcess 
* Also added dummy ivar to APM_BMP085_hil
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 94423bc335 AP_IMU: fixed shim driver prototype 2011-11-25 20:00:18 -08:00
Andrew Tridgell e0488e134f desktop: fixed build with updated dataflash interface 2011-11-25 20:00:17 -08:00
Andrew Tridgell 8245835ea3 desktop: make AP_InertialSensor pure virtual 
fixed a link error in Desktop build

thanks to Pat for the C++ foo
 2011-11-25 20:00:17 -08:00
Andrew Tridgell bb7af8c15a dataflash: fixed datatypes to be compatible with desktop build 2011-11-25 20:00:17 -08:00
Andrew Tridgell a9c0cbac77 desktop: make DataFlash for Desktop build replace APM1 build 2011-11-25 20:00:17 -08:00
Andrew Tridgell 6e9e857157 make configure default to 2560 
1280 is less common for devs these days
 2011-11-25 20:00:17 -08:00
Pat Hickey 82e7551c90 purple: rework DataFlash to separate purple and APM1 hardware support 
the purple support is still a work in progress, but the APM1 support
should be fine
 2011-11-25 20:00:16 -08:00
Pat Hickey a159669cee build: added jtag-program make target 
useful for when you have hosed your USB
 2011-11-25 20:00:16 -08:00
Pat Hickey e53bcba4d9 purple: rework AP_IMU library to use AP_IntertialSensor library 
the AP_IMU keeps the handling of the calibration, but most of the real
work happens in the lower level AP_IntertialSensor library
 2011-11-25 20:00:16 -08:00
Pat Hickey 82b48784ef purple: added AP_InertialSensor library 
this abstracts the way of getting inertial sensor (gyro and
accelerometer) data for the APM1 and purple hardware. The Oilpan code
is based closely on the old APM1 code
 2011-11-25 20:00:16 -08:00
Pat Hickey c9f7618ccc purple: rework the RC_Channel library for the APM_RC changes 2011-11-25 20:00:16 -08:00
Pat Hickey f36ded2854 RangeFinder: rework to use AnalogSource library 
this removes the hacks that check for the ADC object, and instead
choose the method of getting the analog sonar value via the
AnalogSource API
 2011-11-25 20:00:16 -08:00
Pat Hickey 0c0a1b1dcc purple: Added AnalogSource library 
this library abstracts out the way of getting an analog value. If the
ADC library is being used then it calls the ADC Ch() method, otherwise
it calls analogRead()
 2011-11-25 20:00:16 -08:00
Pat Hickey 017f121566 AP_ADC: rework ADC library to use PeriodicProcess and ISR_Register 
this makes it possible to build the ADC library when another driver
may also want that interrupt
 2011-11-25 20:00:16 -08:00
Pat Hickey d288b8870d purple: added PeriodicProcess library 
this library provides a clean API for drivers to request periodic
timer driven calls at whatever rate they need
 2011-11-25 20:00:16 -08:00
Pat Hickey 1daadb5068 purple: added ISR_Registry() library 
this allows libraries to register interrupt handlers, so multiple
components can use the same hardware level interrupt
 2011-11-25 20:00:16 -08:00
Pat Hickey 36346fd86b purple: rework APM_RC library for purple hardware 
this splits the APM_RC class into instances for purple and APM1, and
adds example sketches for both
 2011-11-25 20:00:16 -08:00
Pat Hickey 2d8ce38aeb barometer: add purple_hardware option to Init() 
this allows selection of right hardware at Init() time
 2011-11-25 20:00:15 -08:00
Jason Short 6f3b56b38f increased filter 2011-11-25 11:34:05 -08:00
James Goppert 4fa9b7ef85 Working on comments. 2011-11-24 15:54:08 -05:00
James Goppert 29b7eb12a7 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-24 14:28:25 -05:00
James Goppert 7ef8578029 Separated controller block class. 
Also improved documentation of AP_ControllerBlock.
 2011-11-24 13:28:14 -05:00
James Goppert bfda005b5a Removed old variable from hal. 2011-11-24 02:08:27 -05:00
Wenyao Xie 40b3c303f7 Worked on autopilot state/ mode mapping. Corrected PIDBlock sign error. 2011-11-22 16:42:51 -05:00
Andrew Tridgell 73e0ab0c63 desktop: more fixes for DataFlash filesystem changes 2011-11-20 19:06:24 +11:00
James Goppert d61e59d779 Fixed most of quad guidance issues. 2011-11-19 23:34:14 -05:00
James Goppert 60b41311f0 Working on memory problem. 2011-11-19 22:20:06 -05:00
James Goppert 937a268513 Bug located in quad position loop, improved hil. 2011-11-19 21:39:14 -05:00
James Goppert 2337153966 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-18 14:36:47 -05:00
Andrew Tridgell 6d048646c3 desktop: added support for new DataFlash functions 2011-11-18 17:50:12 +11:00
Doug Weibel f752c4b799 Change to logging file system. 
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
 2011-11-17 21:25:51 -07:00
Jason Short afef359aec Upped pressure filter a bit 2011-11-17 11:12:18 -08:00
Wenyao Xie 8017b0415e Working on new hil message for mavlink. 2011-11-15 17:15:54 -05:00
Andrew Tridgell 355519ad1e desktop: when in the CLI, use blocking writes 
this prevents us missing information from the logs
 2011-11-11 09:53:46 +11:00
Andrew Tridgell 9677600433 desktop: don't start alarm till setup() has finished 2011-11-10 21:57:47 +11:00
Jason Short 0e1727e492 MAV_CMD_DO_SET_ROI 2011-11-09 12:07:57 -08:00
Andrew Tridgell 9af935f2f2 desktop: don't alarm in CLI 
loop() is not called in menu system
 2011-11-10 00:14:04 +11:00
Andrew Tridgell 0820ff52a8 desktop: exit if loop() doesn't run for 5 seconds 
this should stop runaway processes
 2011-11-09 19:40:34 +11:00
Andrew Tridgell a0fd4f710f desktop: force awk on macos 
this may help on jasons box
 2011-11-09 17:21:53 +11:00
Andrew Tridgell 53f62b7484 desktop: exit on EOF from stdin 2011-11-09 17:21:53 +11:00
Jason Short 0ca427bdd9 Removed debugging code from APM_PI 2011-11-08 14:41:21 -08:00
Andrew Tridgell db99b664df desktop: fixed malloc cast 2011-11-09 08:47:49 +11:00
Andrew Tridgell 997091e0d6 desktop: be more careful with signed/unsigned in DataFlash 2011-11-09 08:44:19 +11:00
Andrew Tridgell c2082fdd7b desktop: use less stack 
this avoids a problem on cygwin on windows
 2011-11-09 08:09:56 +11:00
Andrew Tridgell c4bba9c4d8 desktop: another MacOS fix 2011-11-08 18:07:19 +11:00
Andrew Tridgell 5194fe489d desktop: make desktop build more portable 
this should help on MacOS

thanks to MikeS for his assistance
 2011-11-08 17:26:53 +11:00
Andrew Tridgell 0e447b12a2 dataflash: type fixup for ReadInt() 2011-11-08 17:26:53 +11:00
Andrew Tridgell 294c812b9b desktop: use the libc printf engine 
getting ftoa_engine right was too much work
 2011-11-08 11:59:30 +11:00
Andrew Tridgell 39ddc42cc7 desktop: fixed ultoa_invert() 
the string was backwards
 2011-11-08 11:13:48 +11:00
Andrew Tridgell d33b69492b desktop: improved ftoa_engine.c 
this still doesn't perfectly match the assembler, but its closer
 2011-11-08 11:05:36 +11:00
Andrew Tridgell 0f3c21821a barometer: fixed a build warning 2011-11-08 11:05:36 +11:00
Jason Short 6bf0c32173 Removed some old debug prints from motors.pde 
added ability to not increment I term for traversals.
 2011-11-07 14:32:39 -08:00
Andrew Tridgell c1dad23679 autotest: fill flash with 0xff on erase 2011-11-07 23:42:18 +11:00
Andrew Tridgell 3b48389efe Desktop: added -w option to wipe eeprom and dataflash 2011-11-07 22:56:13 +11:00
Andrew Tridgell da800a295f Desktop: added support for DataFlash in Desktop build 
this will allow Jason to look at the logs of the quad sim
 2011-11-07 22:56:13 +11:00
Andrew Tridgell 580139c6e4 digital.c for CLI 2011-11-07 22:56:13 +11:00
Andrew Tridgell cfe058c5d5 DataFlash: use CPU independent data types 
this ensures that the DataFlash API is consistent for different CPU
architectures, which matters for the Desktop build, and will matter
for ARM and other CPUs later
 2011-11-07 22:56:13 +11:00
Andrew Tridgell 94f0e8a4a3 Desktop: enable the CLI in desktop build 
this gives access to the CLI menus. You can start the SIL with the -s
switch to set the slider position to CLI
 2011-11-07 22:56:13 +11:00
Andrew Tridgell b927e64440 desktop: fixed 2 crashes in the menu code 
handle an empty line gracefully, and use pgm_read_pointer() for
functions pointers in progmem
 2011-11-07 22:56:13 +11:00
Andrew Tridgell d78bbb1a40 added pgm_read_pointer() 
this will be used by the menu code to make reading pointers from
progmem portable
 2011-11-07 22:56:13 +11:00
Andrew Tridgell 251cf7d87c force LANG=C for MacOS awk 2011-11-07 13:33:38 +11:00
Doug Weibel e3ab1b0353 Add an accessor for the DCM drift correction integrator to monitor performance 
Also made the get_health accessor an inline function.
 2011-11-05 09:02:23 -06:00
Doug Weibel 947950398c Changed the DCM drift correction integrator limit to a vector magnitude of 30 degrees/second. 
The drift correction integrator limit previously was near/at the gyro saturation limit.  If we have that much drift there is a serious hardware problem.  30 degrees/second is arbitrary but should handle all temperature variation, etc.
 2011-11-05 09:01:20 -06:00
Doug Weibel c7077fa9e8 In case of DCM renorm "blow-up" reset the drift correction integrators 
This should aid in recovery if we loose the AHRS solution and have to force to initial orientation.  Also removed some old commented out code moved to the IMU object
 2011-11-05 08:59:16 -06:00
James Goppert 8058154f61 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-01 21:58:10 -04:00
Andrew Tridgell e7671178b3 desktop: fixed TCP buffering issue with HIL 
the TCP layer was buffering the servo updates, which caused very poor HIL flight
 2011-11-02 09:38:44 +11:00
Simon Salykov 04d4aa4310 Obstacle avoidance moved from AP_Guide to ControllerCar (works only for cars for now), algorithm changed 
New feature Forward/Reverse in Controller Car
Misc bug fixes in ControllerCar
 2011-11-01 19:09:57 +01:00
Jason Short 4f8ef25643 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-01 09:30:54 -07:00
Jason Short 9c4ad5f7ff Baro 
Minimized the baro filtering to use a new approach to rate control. Redid the state machine so the temp is sampled more often.
 2011-11-01 09:22:21 -07:00
Amilcar Lucas ab730ff919 Added camera and/or antenna mount support. 
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
 2011-10-31 22:55:58 +01:00
Amilcar Lucas 75751900d6 Update the SIL README file 2011-10-31 21:56:25 +01:00
James Goppert 025fa7fb5d ArduPlane cmake build working. 2011-10-31 13:18:48 -04:00
James Goppert 3f8603331d Switching to new eclipse project style. 2011-10-30 22:57:34 -04:00
Michael Oborne d18bb1cc7e prevent div by 0 2011-10-30 21:28:39 +08:00
Andrew Tridgell f8f2f9139d added desktop header 2011-10-30 17:31:32 +11:00
Andrew Tridgell de0a7117a8 make desktop serial more responsive 2011-10-30 13:00:54 +11:00
Andrew Tridgell 0211fc2f09 move g_rc_function[] to RC_Channel library 
libraries should not rely on data declared in the main program. This
caused a build error for the Desktop build for ArduCopter under cygwin
 2011-10-29 18:42:18 +11:00
Andrew Tridgell cf4c2cc1cf merge NULL ptr mavlink array fix 
this fixes a segfault in ArduPlane when using a NULL pointer for
satellite_prn in GPS status
 2011-10-29 18:29:18 +11:00
Andrew Tridgell 699f3388fc updated to latest upstream mavlink headers 
this includes the new APM_Camera headers from ardupilotmega.xml
 2011-10-29 18:07:09 +11:00
James Goppert 14d27b1e4c Cleaned up AP_GPS formatting. 2011-10-28 14:52:50 -04:00
James Goppert d97692de9d Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-28 14:45:01 -04:00
James Goppert 77da85648d Clean up formatting for AP_Common 2011-10-28 14:43:43 -04:00
Michael Oborne 6818794bb4 Fix HIL DCM to match actual 2011-10-28 17:40:18 +08:00
Andrew Tridgell c0a43a1837 minor mavlink 1.0 updates 2011-10-28 15:54:22 +11:00
James Goppert 82b23f8eb5 APO multiple mode handling added. 2011-10-27 19:42:57 -04:00
James Goppert 9192143c44 Fixed APO bug in current waypoint update. 2011-10-27 17:23:08 -04:00
James Goppert fc12113167 Adding bash formatting script using astyle. 2011-10-27 16:30:15 -04:00
James Goppert 63efe302f2 Merge https://code.google.com/p/ardupilot-mega 2011-10-27 16:21:44 -04:00
James Goppert d1d82077c7 Fixed APO controller bug preventing motor arming. 2011-10-27 16:19:42 -04:00
Jason Short 27d9712e80 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 
Conflicts:
	libraries/APM_PI/APM_PI.cpp
 2011-10-27 12:41:00 -07:00
Jason Short 76bf784f8c RC_Channel Dead zone 
Added APVar dead_zone to the RC_Channel library so you could edit it in the Mission planner
Made CH filtering off by default.
 2011-10-27 11:34:00 -07:00
James Goppert 5770be6dc6 Fixed APO examples. 2011-10-26 14:59:40 -04:00
James Goppert 57e4a80fe1 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-26 13:25:49 -04:00
James Goppert 41463ade10 Further APO controller cleanup. 2011-10-26 13:25:06 -04:00
jasonshort 8ec0eec5a2 Just in case the Min and Max functions are not playing nice with AP_Var 2011-10-26 16:48:50 +00:00
Jason Short 6fd7c1dcda AP_PI AP_Var change 
using the If statement rather than Max to avoid potential AP_Var issues. I don't know if this is a real prob or not. Just being careful.
 2011-10-26 09:46:16 -07:00
James Goppert 3ea6a4d287 APO formatting. 2011-10-26 12:31:11 -04:00
James Goppert 92bd8b5d8b Updated APO Controllers. 2011-10-25 19:40:07 -04:00
James Goppert 037e121cdd Further abstracted APO Controllers 
Currently APO quad/plane/tank need to be updated
for new controller changes.
 2011-10-25 18:53:39 -04:00
Andrew Tridgell f7780a81c8 imported custom_mode size fix 2011-10-24 13:41:15 +11:00
Andrew Tridgell 14cb884938 fixed mavlink10 desktop build 2011-10-24 13:09:19 +11:00
Andrew Tridgell 690684d28b import latest MAVLink 1.0 headers and XML 2011-10-24 12:20:46 +11:00
Andrew Tridgell e62bc659b6 updated to latest mavlink 1.0 messages 2011-10-24 10:20:36 +11:00
Andrew Tridgell 02725a1160 mavlink: added mavlink10 target for desktop build 2011-10-24 10:20:36 +11:00
Andrew Tridgell de7cf3d1db mavlink: make it possible to build with mavlink 1.0 headers 2011-10-24 10:20:36 +11:00
Andrew Tridgell 7cc396bd83 mavlink: import latest mavlink 0.9 headers 2011-10-24 10:20:36 +11:00
Andrew Tridgell 08ae7de678 mavlink: import mavlink 1.0 message definitions 2011-10-24 10:20:35 +11:00
Andrew Tridgell cbf9ce8d14 mavlink: import mavlink 1.0 includes 2011-10-24 10:20:35 +11:00
Andrew Tridgell bdfcad234e RC_Channel_aux is needed for ArduPlane build 2011-10-24 10:20:19 +11:00
James Goppert b409173aae Corrected battery monitoring in apo. 2011-10-20 02:28:47 -04:00
James Goppert 4e89f61e27 Arming fixes. 2011-10-19 20:09:06 -04:00
James Goppert b16666bf2f Added loop priority, fixed arming bug for apo. 2011-10-19 13:22:29 -04:00
James Goppert 7dd8875f43 More cleanup. 2011-10-19 00:31:59 -04:00
James Goppert d20d53ee81 Some cleanup. 2011-10-19 00:25:00 -04:00
James Goppert 1aa8586558 Added arming mechanism. 2011-10-19 00:21:19 -04:00
James Goppert 4653ea7629 Incorporated dcm changes from arducopter into apo. 2011-10-18 22:00:24 -04:00
James Goppert 4cc0aec5f1 Updated apo rates. 2011-10-18 20:11:14 -04:00
Andrew Tridgell c8847e0d55 desktop: refactor the TCP code 
this supports all 3 serial ports, plus cleans up the code
 2011-10-17 19:32:48 +11:00
James Goppert 3cab0fb814 Updated ArduRover/ ArduBoat for new apo changes. 
Still need to add arming/ disarming to rover/boat controllers.
 2011-10-16 03:15:22 -04:00
James Goppert 185a24a3ae Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-16 02:58:38 -04:00
James Goppert 32af63f734 Added battery monitoring, arming to apo. 
Arming added for quadrotor. Need to add to rover still. Battery
monitoring added with auto shut-off in quadrotor controller.
Finally split apo header and source files to allow faster
compiling/ fix cyclic header inclusions.
 2011-10-16 02:55:34 -04:00
Jason Short b8e7eac346 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-15 13:09:18 -07:00
Jason Short 142707711e Updates to guided mode from Michael O. 
removed or commented unused static vars
 2011-10-15 13:09:04 -07:00
James Goppert aacc8a6179 APO quad stabilized flight working well. 2011-10-14 18:28:29 -04:00
Michael Oborne d38b289766 hil sensor cleanup 2011-10-14 18:14:32 +08:00
Michael Oborne 8abd4bbd69 fix delta time in imu shim 2011-10-13 22:36:51 +08:00
Michael Oborne 7ef51f723d Sensor hil fix's 2011-10-13 22:22:03 +08:00
Michael Oborne 29380b3995 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-13 17:49:35 +08:00
James Goppert 7285cf28e2 Got APO quad stabilized flight to hover. 
Needs more gain tuning.
 2011-10-12 20:05:01 -04:00
Michael Oborne 20ed86da28 fastserial tcp 2011-10-13 07:25:30 +08:00
Michael Oborne 12131911b2 Desktop: cygwin fixs for AP and AC SIL 2011-10-11 20:30:34 +08:00
Andrew Tridgell 25d07075b7 desktop: more cygwin fixes 2011-10-11 21:33:31 +11:00
Andrew Tridgell 75d31dcc4c desktop: removed the need for libbsd 
this should help the cygwin build that MikeO is working on
 2011-10-11 21:04:07 +11:00
Andrew Tridgell b415542690 desktop: added Makefile.desktop 2011-10-11 20:53:43 +11:00
Andrew Tridgell 8290b61951 desktop: fixed a warning 2011-10-11 20:53:43 +11:00
Andrew Tridgell bcb8fb1c7f desktop: silence an implicit cast warning 2011-10-11 20:53:43 +11:00
Andrew Tridgell 4016482573 desktop: make the main loop a bit more responsive 
this introduces less delays on linux than usleep()
 2011-10-11 17:49:40 +11:00
Andrew Tridgell 3c3db649d5 desktop: make ISRs normal C++ functions 
this will make it possible to add an abstract register simulation
class that allows us to intercept device IO
 2011-10-11 17:49:40 +11:00
Andrew Tridgell bd42484ab8 update README with build and usage information 2011-10-11 17:49:40 +11:00
Andrew Tridgell ea82b27fe5 support building with common Makefile.desktop 2011-10-11 17:49:40 +11:00
Michael Oborne 14dbc9523c Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-11 08:05:14 +08:00
Andrew Tridgell 0939b51a4c added build makefiles 2011-10-10 07:18:38 +11:00
James Goppert 3e1ae9b215 APO GPS bug fix. 2011-10-09 15:57:29 -04:00
James Goppert a747a88762 Fixed APO bug. 2011-10-09 11:46:56 -04:00
Andrew Tridgell 632e0312de opticalflow: use the right path for SPI.h 2011-10-09 22:40:00 +11:00
Andrew Tridgell 17aec03a2f added a README 2011-10-09 22:16:14 +11:00
Andrew Tridgell 41dd8d60ba use ifdef for DESKTOP_BUILD 2011-10-09 22:16:14 +11:00
Andrew Tridgell 034755e432 use nanosleep() instead of usleep() 2011-10-09 22:16:14 +11:00
Andrew Tridgell eebd632967 fixed millis() and micros() 2011-10-09 22:16:14 +11:00
Andrew Tridgell 8c8ad0cd55 desktop: use a bit less CPU 2011-10-09 22:16:13 +11:00
Andrew Tridgell 5cf3e92a22 desktop: use non-blocking IO 2011-10-09 22:16:13 +11:00
Andrew Tridgell 65900dd1e0 desktop: expand eeprom to 4k initial size 2011-10-09 22:16:13 +11:00
Andrew Tridgell b8dfdc293b desktop: flush all serial writes 2011-10-09 22:16:13 +11:00
Andrew Tridgell 7098e8cfa1 first rough build for desktop CPUs 
this allows ArduPlane to build and startup on 'desktop' systems (eg. a
Linux box). Very rough for now, and only for HIL so far
 2011-10-09 22:16:13 +11:00
Andrew Tridgell 28ebca1bf6 fixed PROGMEM declaration for desktop build 2011-10-09 22:16:13 +11:00
Andrew Tridgell 38c033e8dd memcheck: allow memcheck to build on desktop systems 2011-10-09 22:16:12 +11:00
Andrew Tridgell bcc2aed8fb initialise spare bits in AP_Var headers 
if we ever need these bits, it would be nice to know that they are
zero in existing eeproms
 2011-10-09 22:09:00 +11:00
Andrew Tridgell 288aba074f fastserial: allow vprintf() to build without assembler 2011-10-09 22:08:59 +11:00
Andrew Tridgell 00d52a8bd7 ap_common: use intptr_t for pointer casts 
this allows building on systems with pointers that aren't 16 bits long
 2011-10-09 22:08:59 +11:00
Andrew Tridgell fc53d5c477 modefilter: fixed type to be consistent with declaration 2011-10-09 22:08:59 +11:00
Andrew Tridgell 6048f3870f GPS: fixed type to be consistent with declaration 2011-10-09 22:08:59 +11:00
Andrew Tridgell 7a5fa24ba5 eeprom: fixed types to be consistent with declarations 2011-10-09 22:08:59 +11:00
James Goppert f6fe6fde33 Updated APO, HIL working well, live mode ready to test 2011-10-06 19:17:49 -04:00
James Goppert 3e988cc5e1 Reducing copy ctor calls in apo. 2011-10-06 12:00:45 -04:00
James Goppert 8409c864a6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-03 13:22:59 -04:00
James Goppert cd451b749e Cleanup of AP_RcChannel, removed scaled class. 2011-10-03 13:22:23 -04:00
Amilcar Lucas 45950489d1 More improvements to MS Windows 
Now the avr-gdb, avrdude and avarice tools do not need to be in the path.
 2011-10-03 19:16:55 +02:00
James Goppert 0fc595d528 Added AP_RcChannel_Scaled to APO 2011-10-03 12:42:27 -04:00
Amilcar Lucas 69de071281 Spellcheck apo library 2011-10-03 12:50:41 +02:00
amilcar 7a510084b1 Fix serial port on windows 2011-10-03 12:10:27 +02:00
amilcar 550deffbe8 Make it work on windows "out-of-the-box" 2011-10-03 12:08:19 +02:00
James Goppert f83fb23d7a Removed extra waypoint loading. 2011-10-02 23:32:12 -04:00
John Arne Birkeland a621f5821f APM_RC: Cosmetic changes to increase readability and some minor optimizations 2011-10-02 18:05:00 +02:00
Amilcar Lucas 9dca9816f8 Implement relay get() 2011-10-02 02:28:40 +02:00
Amilcar Lucas 7b4ccffa53 Moved relay control functions to it's own library 2011-10-02 01:00:27 +02:00
Jason Short 1c284cacb3 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-01 15:55:31 -07:00
Jason Short 0bfa67f413 Heavy Accel Filter + mild Gyro Filter. To use, filter_result must be set to true on ADC. Off by default. 2011-10-01 15:44:53 -07:00
Amilcar Lucas c37fabea66 Added a comment to the BOARD type of teh make configure output file 2011-10-02 00:04:21 +02:00
Amilcar Lucas eaaf44e2c8 Fix Arduino version detection on some systems 2011-10-02 00:03:57 +02:00
rmackay9 12e8e27af1 Merge remote-tracking branch 'origin/master' 2011-10-01 21:56:29 +09:00
rmackay9 c80143b96e AP_Optflow - small fix to lat/lon calculation and made example sketch work again 2011-10-01 21:51:14 +09:00
Jason Short 189fc194b6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-30 18:40:40 -07:00
Jason Short f89da12387 Minimized the accel_filtered vector to be faster and more accurate. 
Made the Filter include the Accels and moved from 8 to 4 terms in the filter
 2011-09-30 18:40:29 -07:00
James Goppert 0c7c508541 Optional recursion added. 2011-09-30 17:17:51 -04:00
James Goppert 48b811f6fa Updated cmake. 2011-09-30 16:55:27 -04:00
Jason Short a7ea200407 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-29 23:27:36 -07:00
Jason Short de61e87128 Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller 
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
 2011-09-29 23:27:23 -07:00
Jason Short 1f8576559a Optimized PI loop 2011-09-29 22:37:56 -07:00
James Goppert 9e6b47184a Arduino version directory updated to lib/version.txt 
Also updated cmake files.
 2011-09-29 22:10:26 -04:00
James Goppert 5489b84f8e Improvements to cmake. 2011-09-29 21:23:26 -04:00
James Goppert b0a1721199 Added cmake files. 2011-09-29 14:16:36 -04:00
James Goppert d887a28b91 Added ArduBoat/ ArduRover/ and APO library. 2011-09-29 14:12:15 -04:00
Jason Short 0c847a43f3 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-26 22:12:52 -07:00
Jason Short 326cfef808 Dead Zone fix - Now the range is full instead of clipped. Should make the Yaw much more smooth. 2011-09-26 22:12:39 -07:00
Amilcar Lucas 03740469fd fix quotes and indentation 2011-09-27 04:40:00 +02:00
James Goppert 9c766d6373 Added override for mega upload protocol. 2011-09-26 20:29:09 -04:00
Amilcar Lucas e5c248e2bf Moved mavlink_check_target() to the libraries/. 
This allows it to be reused by the other libraries and by other projects ArduPlane, ArduCopter, ArduRover ... etc.
It also reduces code duplication
 2011-09-24 14:40:07 +02:00
James Goppert 6abb8a0796 Modified Arduino.mk to use correct upload protocol if not overrided. 
The previous comment of upload protocol not working cannot be verified on
linux. If this problem persists on cygwin, please override with
UPLOAD_PROTOCOL=arduino in the enivornment before calling Arduino.mk
 2011-09-22 13:35:26 -04:00
Jason Short ce338071eb RC_Channel tweaks. using Radio_trim rather than 1500 in Raw output. Cleaned up line in calc PWM to be easier to read. 2011-09-21 14:52:20 -07:00
Jason Short 231e7e961c changed PI to float 2011-09-19 14:41:32 -07:00
Jason Short bf94ba551e changed PI Library to take Float for DeltaTime 
Changed timing to be more accurate in main loop. Still need to switch to micros(). Left that for Tridge. This gets rid of six floating point calcs *250. Nice!
 2011-09-19 14:02:42 -07:00
Andrew Tridgell f375258699 fixed inconsistent linefeeds in ADC code 
the linefeeds had bacome inconsistent in this library, making some
editors fail to load the code
 2011-09-19 11:04:02 +10:00
Andrew Tridgell edd7e509d9 MAVLink: enable separate MAVLink helpers 
this makes the core MAVLink functions into library calls, instead of
being inlined. The resulting code size doesn't change, but it means we
can safely call MAVLink functions from multiple places without causing
undue code bloat
 2011-09-18 11:03:27 +10:00
Amilcar Lucas 227ce0a92d Merge some small misc improvements from APM_Camera branch 2011-09-17 20:25:31 +02:00
Andrew Tridgell 8b90ad84f6 fixed ArduCopter HIL build 2011-09-17 14:58:02 +10:00
Andrew Tridgell 3c69404d5b fixed build of OpticalFlow code 2011-09-17 14:58:02 +10:00
Andrew Tridgell a835912d93 ADC: randomise the sampling rate 
this is based on suggestions from Kari and Mike, and should reduce the
aliasing effects we get from the simple averaging
 2011-09-17 14:58:02 +10:00
Andrew Tridgell ba6c58a33c build: cope with more depths for libraries 
this finds the libraries at more levels up from the current directory
 2011-09-17 14:58:02 +10:00
Andrew Tridgell 840c256fe3 ADC: show timing information in ADC test 2011-09-17 14:58:02 +10:00
Andrew Tridgell 197b1d140a show noise levels in ADC test 2011-09-17 14:58:02 +10:00
Andrew Tridgell 1d68953416 ADC: the bottom 3 bits of ADC output are always zero 
its a 12 bit ADC .... silly of me to think the bottom 3 bits are
valid!
 2011-09-17 14:58:02 +10:00
Andrew Tridgell bd30840518 updated ADC test for new API 2011-09-17 14:58:02 +10:00
Andrew Tridgell 9af7021a98 change ADC sample rate to 1kHz 
this costs us about 9% of our CPU, but should make aliasing much less
of a problem.
 2011-09-17 14:58:02 +10:00
Andrew Tridgell acb4538073 RangeFinder: use new ADC interface 
the new interface gives values 8 times as large as previously
 2011-09-17 14:58:02 +10:00
Andrew Tridgell 9314dcaa89 DCM: re-work the DCM to use the new IMU/ADC features 
this gives us higher resolution DCM calculations, with much more
accurate timing of the update delta time.
 2011-09-17 14:58:02 +10:00
Andrew Tridgell 8b3d9400e5 IMU: re-work the IMU library to take advantage of the ADC Ch6() call 
This changes the IMU code to read 6 synchronised ADC channels at one
time, giving us matching values, and exposing the exact averaging time
to callers
 2011-09-17 14:58:02 +10:00
Andrew Tridgell 70bf945d40 ADC: re-work for ADC code for full resolution and accurate timing 
this changes the ADC code to return the full resolution of the
sensors. It also adds a new Ch6() interface that returns 6 channels at
once, so the IMU can read 3 accelerometers and 3 gyros at once, and
get the exact time that the values were accumulated over
 2011-09-17 14:58:02 +10:00
Andrew Tridgell 3a9b7d6458 GPS: change example serial rate to 115200 
this matches default for AP/AC
 2011-09-17 14:58:02 +10:00
Andrew Tridgell a5d2e96dc6 barometer: print a message on barometer init in example code 
this helps track down initialisation problems
 2011-09-17 14:58:02 +10:00
Jason Short 45778a4e81 added sin and cos yaw from DCM, renamed "get" function because it doesn't return a value. 2011-09-16 19:24:57 -07:00
Jason Short cd72e6bea9 roughed in an expo option idea 
made min and max values 1100, 1900
removed hard coded init for camera values
 2011-09-16 19:06:53 -07:00
Jason Short 9bcbe70e59 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-16 18:35:14 -07:00
Jason Short d29cfbcee3 Integration of optical flow 
bug fixes for new Simple mode
increased Baro filter by 2 fields
 2011-09-15 23:33:00 -07:00
Janne M d5e5240e19 Issue #415: Modified spotlight search string. Added UPLOAD_PROTOCOL parameter to makefile to use different programmer. 2011-09-15 22:38:22 +03:00
Mike Smith 42abbb41fd Add options to generate assembly listings for all of the compiled 
files.  This is a possible starting point for a tool to analyse the
call graph and stack usage of APM.

It's also interesting by itself.
 2011-09-14 22:39:34 -07:00
unknown 7a70cb6169 Merge branch 'master' of https://code.google.com/p/ardupilot-mega/ 2011-09-14 16:02:21 +02:00
unknown a4e001bbcf Adding CMake support 2011-09-14 15:44:55 +02:00
Amilcar Lucas 1f29197771 Revert more of 6dcbc7f44bc0. 
Fix an issue with initialization of channels that on-line changed their function.
For the curious people that the code size overhead of having any aux channel do any function (with this code) is 44 bytes.
 To see wich code I'm talking about, do a git diff 05057ac2d455..this_commit (replace this commit with the commit hash of this commit)
 2011-09-13 14:01:35 +02:00
Amilcar Lucas f08cea8044 These changes were meant to be inside commit a14c06adc06b. I'm sorry but reverting stuff is not that easy 2011-09-13 01:54:47 +02:00
Amilcar Lucas 5406991831 Added support for routing any function to any of the aux. servos. 
This is a manual merge from the APM_Camera branch.
It reverts the stuff that Oliver did not menat to do with his commit 6dcbc7f44bc0
 2011-09-13 01:24:06 +02:00
Jason Short fdc56c9ad5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-09-12 12:57:56 -07:00
Jason Short ecd14f4425 Cleaned up guided mode 
Reduced ADC filter to 3 from 6 to increase speed of filter.
 2011-09-12 12:57:36 -07:00
DrZiplok c0b4cb661f GNU sed wants -r, Darwin/BSD sed wants -E. 2011-09-12 18:43:31 +00:00
Amilcar Lucas c7b3bfd295 Use the G_RC_AUX macro when possible. Added more comments. Remove unused code 2011-09-12 20:21:12 +02:00
Mike Smith c1460add3b Reinstate a Cygwin workround that was backed out by the previous changes. 
Not all platforms support (or require) the -r argument to sed.
 2011-09-11 22:20:54 -07:00
Olivier ADLER 1ee65e3ef2 Merge branch 'APM_Camera' of https://code.google.com/p/ardupilot-mega/ 
Conflicts:
	ArduPlane/ArduPlane.pde
	libraries/AP_Camera/AP_Camera.h
	libraries/AP_Mount/AP_Mount.cpp
	libraries/AP_Mount/AP_Mount.h
 2011-09-12 00:31:18 +02:00
Amilcar Lucas 77c798abd5 Use G_RC_AUX macro to simplify accessing the auxiliary servos 2011-09-12 00:02:47 +02:00
Amilcar Lucas 46f9d4cec8 This is ugly, but it fixes compilation on arduino 2011-09-11 23:25:06 +02:00
Amilcar Lucas ce010b4e38 Moved update_aux_servo_function() to the RC_Channel_aux.* files. 
This simplifies code sharing between ArduCopter and Arduplane at the expense of 48bytes.
Moved CH_x defines out of the defines.h file and into the library where they belong
 2011-09-11 23:07:30 +02:00
Jason Short d50ed35077 Added a state machine intended to run at 250hz to the DCM. Spread load of DCM out to lower CPU. 2011-09-11 11:03:55 -07:00
Amilcar Lucas 213969202a Moved the RC_Channel_aux class to its own file. The includes could be improved, has anyone got any ideas how ? 2011-09-11 19:13:01 +02:00