Ka Ru
d728eef685
AP_Notify: add can-zero board
2023-12-05 07:41:06 -06:00
Ka Ru
329c6ba668
AP_HAL: add can-zero board
2023-12-05 07:41:06 -06:00
Ka Ru
ce177a3637
AP_HAL_Linux: add can-zero board
2023-12-05 07:41:06 -06:00
Peter Barker
455610a7ad
AP_Scripting: correct mavlink_test.lua
2023-12-05 20:15:21 +11:00
Paul Riseborough
7601a02e98
AP_AHRS: added AHRS_OPTIONS parameter
...
the first option is to disable DCM fallback on fixed wing. This is
suitable in environments with a high likelyhood of GPS interference
2023-12-05 19:28:50 +11:00
Andrew Tridgell
5fce4f5f6d
SITL: added simple simulated jammer
2023-12-05 19:28:50 +11:00
Andrew Tridgell
c316de75d0
SITL: fixed whitespace in SIM_GPS.cpp
...
this one has been really bad for a while
2023-12-05 19:28:50 +11:00
Andy Piper
cca8f8219a
hwdef: new variant of KakuteH7 using ICM42688
2023-12-05 11:41:08 +11:00
Andy Piper
0cc5cf7d2d
AP_HAL_ChibiOS: allow betaflight converter to run on output from "dump hardware"
2023-12-05 11:38:53 +11:00
Martin Luessi
6e417f1d0c
RADIX2HD: Set HAL_I2C_INTERNAL_MASK
2023-12-05 11:37:57 +11:00
Iampete1
b8114da102
AP_Motors: Heli: dual and quad: remove un-needed override methods
2023-12-05 09:12:37 +09:00
Ryan Friedman
fadedbbb47
AP_HAL: Add MicroStrain7 support
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-12-05 11:09:22 +11:00
Ryan Friedman
5bcdaa360e
AP_HAL_SITL: Add MicroStrain7 support to SITL
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-12-05 11:09:22 +11:00
Ryan Friedman
1ae13cd66d
SITL: Switch to using GPS Timestamp for 5 series driver
...
* The old descriptor is deprecated
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-12-05 11:09:22 +11:00
Ryan Friedman
7c183f4ab3
AP_ExternalAHRS: Add MicroStrain7 support
...
* Implement filter state without relying on GPS
* Implement health and initialization check based on filter state
* Fix pre-arm checks missing version
* Add version specifics to microstrain 5 log msgs
* Add utilities to microstrain packet to remove magic number array
access
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-12-05 11:09:22 +11:00
Iampete1
433f98fee1
AP_Vehicle: call scripting update from 1Hz loop
2023-12-05 11:03:58 +11:00
Iampete1
2a3a5b2804
AP_Scripting: add checksum of running and loaded scripts with arming check
2023-12-05 11:03:58 +11:00
Iampete1
423a218643
GCS_MAVLink: use new filesystem crc32 method
2023-12-05 11:03:58 +11:00
Iampete1
2c7e06dc5e
AP_Filesystem: add crc 32 method
2023-12-05 11:03:58 +11:00
Bob Long
24bf288e28
AP_InertialNav: freeze horiz_vel when !velned_ok
...
This addresses concerns about brief failures of get_velocity_NED causing
abrupt changes to the horizonatl velocity estimate.
2023-12-05 10:44:37 +11:00
Bob Long
467e62b967
GCS_Common: allow fallback vert rate in VFR_HUD
2023-12-05 10:44:37 +11:00
Bob Long
6eed40dec1
AP_InertialNav: add fallback vertical velocity
2023-12-05 10:44:37 +11:00
Iampete1
d26fdfc3b2
AP_CustomControl: use base class AC_AttitudeControl object
2023-12-05 08:08:09 +09:00
Andrew Tridgell
c61ee15c1f
AP_Vehicle: init networking after serial manager
...
init before serial manager led to not seeing any error messages if net
init failed
2023-12-04 10:12:41 +11:00
Andrew Tridgell
55b5e1cff1
AP_Networking: fixed off by one error in cache size calculation
...
this caused some of the memory to be cacheable which led to TCP
checksum errors
2023-12-04 10:12:41 +11:00
Peter Barker
0d9c658a1e
SITL: add missing includes
2023-12-04 07:04:12 +11:00
Andrew Tridgell
63f9046265
AP_Networking: fixed docs for network port types
...
and document broadcast and multicast
2023-12-03 11:37:21 +11:00
Tom Pittenger
7f94ae6fe7
AP_Networking: only show NET_IP,DHCP,GW,MASK,MAC if it's actually used
2023-12-02 08:17:52 +11:00
Andrew Tridgell
89506846a3
AP_Networking: improve startup wait
...
this ensures we wait till DHCP has completed
2023-12-01 18:33:29 +11:00
Andrew Tridgell
2ef560db0b
AP_ExternalAHRS: reserve some ExternalAHRS type values
2023-12-01 14:59:57 +11:00
Andrew Tridgell
aba5ec6854
AP_InertialSensor: added support for writing raw IMU data to a UART
...
this is for supporting external visual odomotry systems which need the
IMU data to correctly process image data
# Conflicts:
# libraries/AP_InertialSensor/AP_InertialSensor.cpp
2023-11-30 07:05:02 +11:00
Andrew Tridgell
604559a844
AP_OSD: added new serial manager protocol
2023-11-30 07:05:02 +11:00
Andrew Tridgell
e58e8b861d
AP_Serialmanager: added IMOUT uart type
...
# Conflicts:
# libraries/AP_SerialManager/AP_SerialManager.cpp
# libraries/AP_SerialManager/AP_SerialManager.h
2023-11-30 07:05:02 +11:00
Randy Mackay
46298052b6
AP_Scripting: simplify Rover quick tune
...
Only tunes FF. P and I are set as ratio to FF
2023-11-29 08:18:07 -08:00
Peter Barker
4ede307be2
AP_RCProtocol: rename crc_sum8 to crc_sum8_with_carry
...
the name "sum8" is usually used for "sum all bytes into a uint8_t discarding carry"
2023-11-29 18:50:26 +11:00
Peter Barker
d34e6049c9
AP_Math: rename crc_sum8 to crc_sum8_with_carry
...
the name "sum8" is usually used for "sum all bytes into a uint8_t discarding carry"
2023-11-29 18:50:26 +11:00
Peter Barker
9394a7b26b
AP_RangeFinder: use boolean uartdriver read method
2023-11-29 18:29:11 +11:00
Peter Barker
97417a1038
SITL: rename SITL::GPS_GSOF to SITL::GPS_Trimble
2023-11-29 18:04:56 +11:00
Peter Barker
a143d2e453
SITL: remove trailing whitespace in SITL GPS drivers
...
we've just lost the history for these lines anyway
2023-11-29 18:04:56 +11:00
Peter Barker
d992ead5b1
SITL: rename GSOF to Trimble
...
... as now it's not just GSOF but also DCOL
2023-11-29 18:04:56 +11:00
Peter Barker
568d633dcc
SITL: break up GPS backends into separate files
2023-11-29 18:04:56 +11:00
Tom Pittenger
f72dd8cc89
AP_Network: mavlink packetise requires mavlink
2023-11-29 12:29:19 +11:00
Andrew Tridgell
0d932e8a54
Filter: fixed uint8_t bug in total filters and expand_filter_count bug
...
this gets the right number of notches on quadplanes, but is still very
bad in fwd flight
2023-11-28 18:05:37 +11:00
Andrew Tridgell
002f1076d7
Filter: added optional notch debug logging
...
this has helped find multiple bugs
2023-11-28 18:05:37 +11:00
Andy Piper
a61fc423f0
Filter: allow zero centre frequency to passthrough and disable notch
2023-11-28 18:05:37 +11:00
Iampete1
eb4e3fc36a
AP_InertialSensor: init all notch center frequencies
2023-11-28 18:05:37 +11:00
jfbblue0922
c16e1a28df
AP_HAL_ChibiOS/hwdef: changed defaults parm in JFB110 board definition
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-11-28 15:58:53 +09:00
Peter Barker
2e41cf810c
Revert "AP_GPS: GSOF robust config parsing"
...
This reverts commit bf9881579c
.
2023-11-28 16:09:46 +11:00
Peter Barker
8b7652d1db
Revert "AP_GPS: Move init logic from constructor to class"
...
This reverts commit 5f84cd8f2b
.
2023-11-28 16:09:46 +11:00
Ryan Friedman
35b52a4604
SITL: Implement DCOL parser and bidirectional comms
...
* Implement DCOL command support for GSOF simulator
* Only send GSOF when enabled
* Publish only at the configured rate
* Only build GSOF packets when needed
* This saves CPU
* Make physics and read loop run at full rate
* The logic to rate-limit writes is now pushed to the backend
* Indent errors were fixed too
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 15:50:02 +11:00
Ryan Friedman
d7b5cd3203
AP_GPS: Fix missing GSOF param for SITL
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 15:50:02 +11:00
Ryan Friedman
5f84cd8f2b
AP_GPS: Move init logic from constructor to class
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 15:44:37 +11:00
Ryan Friedman
bf9881579c
AP_GPS: GSOF robust config parsing
...
* Refactor checksum to unique function
* Clear uart before reading data
* Add ack/nack check
* Implement output disable before requesting GSOF data
* Improve debug message to have line number
* Use debug in more code
* Stop delaying in configuration
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 15:44:37 +11:00
Randy Mackay
03c50db07e
AR_WPNav: pos control updated during pivots
2023-11-28 12:46:46 +09:00
Randy Mackay
62dfe0f04b
AR_PosControl: no min speed when stopping
2023-11-28 12:46:46 +09:00
Ryan Friedman
3965c7e4bf
AP_Math: Replace deprecated benchmark function
...
* Been deprecated since 1.2.0
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 12:21:10 +11:00
Andrew Tridgell
2ee48dea29
AP_HAL: support bi-directional UDP broadcast sockets
2023-11-28 12:18:55 +11:00
Andrew Tridgell
7d1f048ca7
AP_Networking: support UDP server, TCP client and TCP server
...
and implement mavlink packetisation and flow control return
2023-11-28 12:18:55 +11:00
Andrew Tridgell
f345d94e91
GCS_MAVLink: increase max mavlink connections when networking enabled
2023-11-28 12:18:55 +11:00
Andrew Tridgell
f471732aad
HAL_ChibiOS: enable SO_REUSEADDR
2023-11-28 12:18:55 +11:00
Andrew Tridgell
0659ab8ef4
HAL_ChibiOS: increase max TCP resources
2023-11-28 12:18:55 +11:00
Andrew Tridgell
a05acfc090
AP_HAL: added last_recv_address() with supplied buffer
...
this prevents a race condition with a static string
2023-11-28 12:18:55 +11:00
Ryan Friedman
be668ddc1b
AP_ExternalAHRS: Clarify public interface design intent
...
* Discussions with Tridge on design intent for these accessors
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-28 11:48:22 +11:00
Henry Wurzburg
d9d5e91110
hwdef: update SDH7V1 readme
2023-11-28 11:47:32 +11:00
Andrew Tridgell
ad59f6db01
AP_DroneCAN: support an aux 11 bit protocol with DroneCAN
2023-11-28 11:38:16 +11:00
Andrew Tridgell
d17a1ca7bc
AP_CANManager: support CAN_Dn_PROTOCOL2 for an aux 11 bit protocol
2023-11-28 11:38:16 +11:00
Iampete1
d626928e0c
SITL: SIM IntelligentEnergy24: add error string to V2 protocol
2023-11-28 11:27:14 +11:00
Iampete1
a00b6b6f86
AP_Gernerator: FuelCell: rework error check to give error cleared msg
2023-11-28 11:27:14 +11:00
Iampete1
3b3c94ea07
AP_Generator: IE_2400: update low and critial error ranges for V2 protocol
2023-11-28 11:27:14 +11:00
Gone4Dirt
ab5d28073d
SITL: Add V2 telemetry protocol to IE24 fuel cell
2023-11-28 11:27:14 +11:00
Iampete1
36dd720e78
AP_Generator: IE 2400: fix V2 low and critical errors and add warnings
2023-11-28 11:27:14 +11:00
Iampete1
c91407d662
AP_Generator: IE 2400: only return custom msg if error is critial or low severity
2023-11-28 11:27:14 +11:00
Iampete1
c861e15853
AP_Gernerator: IE_2400: lengthen message buffer and print error num
2023-11-28 11:27:14 +11:00
Iampete1
90f7ed3410
AP_Generator: Add support for IE V2 protocol
2023-11-28 11:27:14 +11:00
Iampete1
daf8aeeadc
AP_Param: check dynamic param tables are avalable before adding a param
2023-11-28 11:22:43 +11:00
Michael du Breuil
772dbfb04f
AP_GPS: SBF supports yaw from dual antennas
...
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-11-28 11:17:51 +11:00
daniel.li
e6b7daa323
AP_HAL_ChibiOS: Add Aocoda-RC-H743Dual target
2023-11-28 10:29:23 +11:00
Randy Mackay
46f4e6e33a
RC_Channel: Rover circle mode aux function param desc
2023-11-28 07:54:45 +09:00
Randy Mackay
2d89f835e5
AR_PosControl: fix PSC_VEL_I param range
2023-11-28 07:54:45 +09:00
Thomas Watson
87fef1ae5d
AP_HAL_ChibiOS: use get_HAL_mutable() to install new CAN interfaces
...
Avoids dubious extern redefinition.
2023-11-28 08:24:25 +11:00
Thomas Watson
008c0baf5f
AP_DroneCAN_sniffer: use get_HAL_mutable() to install new CAN interface
...
Avoids dubious const_casting.
2023-11-28 08:24:25 +11:00
Thomas Watson
de26095c58
AP_CANManager: use get_HAL_mutable() to install new CAN interfaces
...
Avoids dubious const_casting.
2023-11-28 08:24:25 +11:00
Thomas Watson
3c82ac6043
AP_HAL_SITL: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Thomas Watson
8fe95dca81
AP_HAL_Linux: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Thomas Watson
db12f428c5
AP_HAL_Empty: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Thomas Watson
2dbf5aefb3
AP_HAL_ESP32: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Thomas Watson
a9ddadee3b
AP_HAL_ChibiOS: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Thomas Watson
dc76e03890
AP_HAL: introduce get_HAL_mutable() to complement get_HAL()
...
Returns a mutable reference to the same HAL for certain purposes where
the HAL needs to be mutated to avoid UB problems with casting away const
and to make the fact that mutation is happening obvious.
2023-11-28 08:24:25 +11:00
Andrew Tridgell
c48feefe23
AP_BattMonitor: fixed battery percentage with aux info
...
when we have aux battery information we had assumed the CAN device
would provide the battery remaining percentage. We should obey the "do
not use CAN SoC" with or without an AUX message
This fixes CAN battery monitors with a cell monitor
2023-11-27 13:02:46 +11:00
Stephen Dade
73eb3b0590
AR_Motors: Add prearm check for no outputs
2023-11-27 08:31:31 +09:00
Peter Barker
f40250c073
AP_AHRS: compile EKF2 out by default on all boards
2023-11-27 09:05:08 +11:00
Tom Pittenger
6dcaf94c3d
AP_BattMon: add AP_BATTERY_WATT_MAX_ENABLED
2023-11-26 11:57:14 +11:00
Tom Pittenger
1f7b4d0938
AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for minimize
2023-11-26 11:57:14 +11:00
Tom Pittenger
cd6a656acf
AP_HAL_ChibiOS: set AP_BATTERY_WATT_MAX_ENABLED 0 for periph
2023-11-26 11:57:14 +11:00
Tom Pittenger
8ab3ad2777
AP_Networking: add support for AP_Periph
2023-11-26 11:28:57 +11:00
Tom Pittenger
e8c852f0d4
AP_HAL: Allow APMSockets to autodetect Broadcast IPs
2023-11-25 16:28:07 -08:00
olliw42
8f9df5a62e
AP_Arming: Reduce response time when checks go from true to false
2023-11-25 14:59:04 -08:00
Peter Barker
27f836b66e
hwdef: correct ARK_CANNODE compilation
...
this was turning SPI on when there aren't any devices...
2023-11-25 13:47:13 -08:00
alexklimaj
ddba794420
hwdef: ark_rtk_gps fix safety led
2023-11-25 13:45:56 -08:00
Andrew Tridgell
ee592476ce
AP_HAL: implement multicast for UDP sockets
2023-11-25 12:19:43 -08:00
Andrew Tridgell
68e2bb1f15
AP_Networking: enable receive of multicast packets
2023-11-25 12:19:43 -08:00
Andrew Tridgell
58cf4f65a9
HAL_SITL: use SocketAPM for CAN multicast and SITL_Periph state
2023-11-25 12:19:43 -08:00
Ryan Friedman
14aeb831fb
AP_DDS: Add instructions for running HW test
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-22 21:44:35 -08:00
bugobliterator
4b61b3d64e
AP_Stats: initialise parameter defaults
2023-11-22 21:43:00 -08:00
Tom Pittenger
b5e2f9aa0a
AP_Scripting: change some _INFO msgs to _CRITICAL/ERROR
2023-11-22 00:07:05 -08:00
Pierre Kancir
d98a400d9e
AP_Logger: Prepare the maximum number of log files in the config parameter
2023-11-22 18:35:21 +11:00
Peter Barker
e9fc99b1bf
AP_HAL_ChibiOS: base HAL_USE_SPI on devices not buses
...
fixes compilation problem with gcc 10.3
../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp: In static member function 'static void ChibiOS::SPIDeviceManager::__static_initialization_and_destruction_0(int, int)':
../../libraries/AP_HAL_ChibiOS/SPIDevice.cpp:76:18: error: statement has no effect [-Werror=unused-value]
76 | ChibiOS::SPIDesc SPIDeviceManager::device_table[] = { HAL_SPI_DEVICE_LIST };
| ^~~~~~~~~~~~~~~~
compilation terminated due to -Wfatal-errors.
cc1plus: some warnings being treated as errors
2023-11-22 18:14:00 +11:00
Andrew Tridgell
f30ac4052c
HAL_SITL: added SERIAL4 as UDP output for SITL periph
2023-11-22 17:19:12 +11:00
Andrew Tridgell
a725d8b90c
AP_DroneCAN: support CAN serial ports
...
this allows any serial protocol to be mapped to a remote DroneCAN node
2023-11-22 17:19:12 +11:00
Andrew Tridgell
e06d65bd75
AP_Networking: simplify port registration
2023-11-22 17:19:12 +11:00
Andrew Tridgell
65ffe713b4
AP_SerialManager: enable port registration for dronecan
2023-11-22 17:19:12 +11:00
Andrew Tridgell
e63a2250ca
AP_SerialManager: ensure registered ports are in sorted order
...
this avoids ordering issues if using both CAN and network serial ports
2023-11-22 17:19:12 +11:00
Andrew Tridgell
0ae5c9116c
AP_SerialManager: added AP_SerialManager_config.h
2023-11-22 17:19:12 +11:00
Andrew Tridgell
a54503ae12
AP_SerialManager: define port ranges for CAN serial ports
2023-11-22 17:19:12 +11:00
Peter Mullen
adc0ebf9de
AP_RangeFinder: Add signal_quality_pct to range finder state
2023-11-21 22:24:12 +11:00
Peter Barker
8eb5baa4ae
Filter: correct AP_Filter defines
...
- checking the build type is very rarely used and definitely not required here
- fix boilerplate to conform to normal pattern of including the config header and #if'ing based on the _ENABLED directly after that
2023-11-21 21:13:42 +11:00
Peter Barker
e806adb009
AP_Vehicle: correct AP_Filter defines
...
- checking the build type is very rarely used and definitely not required here
- fix boilerplate to conform to normal pattern of including the config header and #if'ing based on the _ENABLED directly after that
2023-11-21 21:13:42 +11:00
Peter Barker
15e0f689c2
AP_HAL_ChibiOS: correct AP_Filter defines
...
- checking the build type is very rarely used and definitely not required here
- fix boilerplate to conform to normal pattern of including the config header and #if'ing based on the _ENABLED directly after that
2023-11-21 21:13:42 +11:00
Ryan Friedman
da0efa3323
SITL: Bump up read rate on SITL
...
* This is needed to do active configuration quickly
* Read/Write split and exposed to ensure physics/write rate is still
coupled to avoid impacting the jamming and delayed data
* Created a utility to allocate the SITL instance
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-21 15:29:46 +11:00
Andrew Tridgell
69bfe9b837
APM_Control: added D_FF support for fixed wing
2023-11-21 13:26:23 +11:00
Andy Piper
5d53485be0
AP_Logger: add PIDInfo.DFF logging
2023-11-21 13:26:23 +11:00
Andy Piper
6ecb18e027
AP_Vehicle: link in AP_Filter support
...
allow filters to be compiled out
add filter updates at 1Hz
2023-11-21 13:26:23 +11:00
Andy Piper
e729c8ccfa
Filter: add AP_Filter support
...
enable filters with AP_FILTER_ENABLED
allow filters to be compiled out
add dynamic updates, remove load/save and enable
2023-11-21 13:26:23 +11:00
Andy Piper
5b0f30ad44
AP_WheelEncoder: update for new AC_PID settings
...
enable filters with AP_FILTER_ENABLED
2023-11-21 13:26:23 +11:00
Andy Piper
cfebae5857
APM_Control: update for new AC_PID settings
...
enable filters with AP_FILTER_ENABLED
2023-11-21 13:26:23 +11:00
Andy Piper
fc76312fc3
AC_PID: use AP_Filter for notch configuration
...
enable filters with AP_FILTER_ENABLED
dynamically allocate notches
remove load/save for notches, update docs
move feedfoward update to update_all()
restrict load_gains() and save_gains() to just what autotune needs
add D_FF logging
2023-11-21 13:26:23 +11:00
Andy Piper
560030c9ba
AC_CustomControl: update for new AC_PID settings
...
enable filters with AP_FILTER_ENABLED
2023-11-21 13:26:23 +11:00
Andy Piper
b7a969d462
AC_AttitudeControl: update for new AC_PID settings
...
enable filters with AP_FILTER_ENABLED
2023-11-21 13:26:23 +11:00
Andy Piper
13ff23f39d
AP_HAL: enable filters with AP_FILTER_ENABLED on sitl
2023-11-21 13:26:23 +11:00
Andy Piper
d6287e90f1
AC_AttitudeControl: update PID notch centres
...
add documentation for PID notches and D feed-foward
add notches and D feedforward to heli PIDs
add advanced flag to PIDs and selectively compile advanced PID options
2023-11-21 13:26:23 +11:00
Andy Piper
6a40843a9e
Filter: provide accessors for center and sample frequencies on NotchFilter
2023-11-21 13:26:23 +11:00
Andy Piper
370ee7d4d3
AP_WheelEncoder: add documentation for PID notches and D feed-foward
...
add advanced flag to PIDs and selectively compile advanced PID options
2023-11-21 13:26:23 +11:00
Andy Piper
952baf860c
AC_CustomControl: add documentation for PID notches and D feed-foward
...
add advanced flag to PIDs and selectively compile advanced PID options
2023-11-21 13:26:23 +11:00
Andy Piper
9211dba484
APM_Control: update docs for new AC_PID parameters
...
add advanced flag to PIDs and selectively compile advanced PID options
2023-11-21 13:26:23 +11:00
Andy Piper
b17b78e329
AC_PID: add notch filters to target and error terms
...
calculate D feed-forward and notch applications correctly
only update notches when enabled
add notches and D feedforward to heli PIDs
add advanced flag an selectively compile advanced options
2023-11-21 13:26:23 +11:00
Peter Barker
bc03918ea4
GCS_MAVLink: create and use AP_MAVLINK_MSG_UAVIONIX_ADSB_OUT_STATUS_ENABLED
...
narrower define we can use when not compiling in the backends which use this
2023-11-21 13:21:13 +11:00
Peter Barker
232edac8d7
AP_ADSB: create and use AP_MAVLINK_MSG_UAVIONIX_ADSB_OUT_STATUS_ENABLED
...
narrower define we can use when not compiling in the backends which use this
2023-11-21 13:21:13 +11:00
Thomas Watson
b8d50b112a
AP_Compass: fix C++ One Definition Rule violations
...
Two structs with the same name must have exactly the same definition, no
matter where they occur in the program, otherwise the program is undefined.
Move each sample register struct definition into the associated class
definition so they are in a different namespace and no longer
identically named, thus fixing this issue.
2023-11-21 13:21:03 +11:00
Rhys Mainwaring
0d735ffb01
AP_DDS: increase the timeout when creating participants and entities
...
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2023-11-21 13:20:23 +11:00
Peter Barker
6d172a1b22
GCS_MAVLink: exclude deadlock-creation based on FAILURE_CREATION_ENABLED
2023-11-21 09:35:50 +09:00
Henry Wurzburg
f9c9a09327
AP_MSP: update option metadata for clarity
2023-11-21 10:05:56 +11:00
Henry Wurzburg
36a66424e1
AP_BattMonitor:remove unused param from analog fuel level
2023-11-21 10:01:38 +11:00
Peter Barker
170d96e8cc
GCS_Common: remove mappings for non-supported messages
2023-11-20 19:25:25 +11:00
Peter Barker
70160c58e8
GCS_MAVLink: tidy sending of ADSB messages
2023-11-20 19:25:25 +11:00
Peter Barker
6f5ff2f952
GCS_MAVLink: tidy sending of HIGH_LATENCY2 messages
2023-11-20 19:25:25 +11:00
Peter Barker
031e5b1dab
GCS_MAVLink: tidy sending of WATER_DEPTH messages
2023-11-20 19:25:25 +11:00
Peter Barker
a8906ac491
GCS_MAVLink: tidy sending of winch messages
2023-11-20 19:25:25 +11:00
Peter Barker
564e6ec77a
GCS_MAVLink: tidy sending of efi messages
2023-11-20 19:25:25 +11:00
Peter Barker
892bafe951
GCS_MAVLink: tidy sending of esc telem generator messages
2023-11-20 19:25:25 +11:00
Peter Barker
a95b2b2497
GCS_MAVLink: tidy sending of queued generator messages
2023-11-20 19:25:25 +11:00
Peter Barker
d894281f2b
GCS_MAVLink: tidy sending of queued SIM messages
2023-11-20 19:25:25 +11:00
Peter Barker
ec69867102
GCS_MAVLink: tidy sending of queued mcu status messages
2023-11-20 19:25:25 +11:00
Peter Barker
0983bd2d06
GCS_MAVLink: tidy sending of queued opticalflow messages
2023-11-20 19:25:25 +11:00
Peter Barker
c017c8acf4
GCS_MAVLink: tidy sending of queued mount messages
2023-11-20 19:25:25 +11:00
Andy Piper
229916a48c
AP_HAL_ChibiOS: enable serial LEDs on ARK_CANNODE
2023-11-20 19:23:06 +11:00
Andy Piper
04fa8ed593
AP_HAL_SITL: return success status from serial_led_send and set_serial_led_rgb_data
2023-11-20 19:22:20 +11:00
Andy Piper
b5ef11797b
AP_Scripting: add success status to serialLED:send and serialLED:set_RGB
2023-11-20 19:22:20 +11:00
Andy Piper
00ceca0fff
AP_SerialLED: return success status from send and set_RGB
2023-11-20 19:22:20 +11:00
Andy Piper
d30e52ed3f
AP_HAL: return success status from serial_led_send and set_serial_led_rgb_data
2023-11-20 19:22:20 +11:00
Andy Piper
73610c8932
AP_HAL_ChibiOS: return success status from serial_led_send and set_serial_led_rgb_data
2023-11-20 19:22:20 +11:00
Andy Piper
b7fd04318a
AP_HAL_ChibiOS: fix race condition in sending serial LED data
2023-11-20 19:22:20 +11:00
Ryan Friedman
2d465a5b20
AP_DDS: Fix typos and out of date info
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-20 08:40:06 +09:00
Ryan Friedman
213cba86af
AP_SerialManager: Add missing option for XRCE DDS
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-20 08:40:06 +09:00
Andrew Tridgell
8e50584bd8
AP_Networking: fixed buffer size handling
...
make begin() able to change buffer sizes
2023-11-18 16:54:54 -08:00
Henry Wurzburg
176a4aa51a
AP_BoardConfig: add arm/disarm controlled GPIO for module power control
2023-11-18 14:27:05 +11:00
Henry Wurzburg
fffe3afb28
AP_Arming: add arm/disarm controlled GPIO for module power control
2023-11-18 14:27:05 +11:00
Peter Barker
afa263c691
SITL: set sitl point for GPS backends in constructor
...
_sitl is guaranteed non-nullptr by the SITL::GPS::update()
2023-11-18 13:59:28 +11:00
Tom Pittenger
3b35915774
AP_Networking: return bug fix
...
Co-authored-by: Ryan <ryanfriedman5410+github@gmail.com>
2023-11-17 18:24:39 -08:00
Tom Pittenger
fcf602cbe2
AP_Networking: init socket null check
2023-11-17 18:24:39 -08:00
Tom Pittenger
30bccf6266
AP_Networking: adjustable PORT buf size
2023-11-17 18:24:39 -08:00
muramura
f28ef5e5a7
AP_Baro: Returns directly calculated values
2023-11-18 12:18:36 +11:00
Andrew Tridgell
2ba4bf1478
HAL_ChibiOS: allow for --disable-networking
2023-11-17 10:54:24 -08:00
Andrew Tridgell
31fd43ba25
AP_SerialManager: fixed passthru with network ports
2023-11-17 10:54:24 -08:00
Andrew Tridgell
84dd7eaaf1
AP_Networking: added support for mapping network ports
...
only UDP_CLIENT so far
2023-11-17 10:54:24 -08:00
Andrew Tridgell
ba0598930e
AP_Vehicle: added AP_Networking::Port NET_Pn_ parameters
2023-11-17 10:54:24 -08:00
Andrew Tridgell
f9f07912e6
AP_SerialManager: added register_port() API
...
allows another library to register a UART driver for exposing via
AP_SerialManager APIs
2023-11-17 10:54:24 -08:00
Andrew Tridgell
713745ed28
AP_DroneCAN: don't update hobbywing ESC table while armed
...
some hobbywing ESCs have a bug where requesting the ID table can cause
the ESC to stutter
2023-11-17 16:21:58 +11:00
Pradeep CK
71141080a1
AP_EFI : Hirth Driver Addition
...
Implementation for Hirth.
- Base class - AP_EFI
- polynomial functional throttle linearization
- AP_EFI_State parameter addition and changes for hirth logging
- to fix autotest errors
- updated comments
- Hirth CI/CD autotest fail fixes
- logging
- fix CI issues
2023-11-17 13:09:02 +11:00
Andrew Tridgell
6bf3debe73
HAL_ChibiOS: default disable ICE in periph
2023-11-17 13:09:02 +11:00
Andrew Tridgell
3e0e32a409
AP_Scripting: support 2nd cylinder in EFI
2023-11-17 13:09:02 +11:00
Peter Barker
c5eab29f5e
AP_Math: add F_TO_KELVIN and C_TO_F
2023-11-17 13:09:02 +11:00
Peter Barker
a018bed042
SITL: improve MegaSquirt simulator fidelity
2023-11-17 13:09:02 +11:00
Peter Barker
ca16e924db
SITL: add simulator Hirth EFI
2023-11-17 13:09:02 +11:00
Peter Barker
f134a1df34
AP_HAL_SITL: add simulator Hirth EFI
2023-11-17 13:09:02 +11:00
Peter Barker
76d07f21f5
AP_HAL: add simulator Hirth EFI
2023-11-17 13:09:02 +11:00
Peter Barker
2f710a4689
SITL: correct MegaSquirt simulation
2023-11-17 13:09:02 +11:00
Peter Barker
3f730a8a94
AP_Math: add crc_sum_of_bytes
...
sums the values of the bytes in a buffer and returns that sum modulus 256
2023-11-17 13:09:02 +11:00
Pradeep CK
07d76a87fd
AP_ICEngine: support relay for ignition and I2C for starter
2023-11-17 13:09:02 +11:00
Andrew Tridgell
afd18cf13a
AP_Relay: make set() method public
...
this neatens up some calling code
2023-11-17 13:09:02 +11:00
Peter Barker
4f4e6d646c
AP_Mount: validate modes before setting them
2023-11-17 11:45:38 +11:00
Peter Barker
bd05fad850
SITL: add code to add, remove or corrupt bytes in SITL::SerialDevice xfrs
2023-11-17 10:56:25 +11:00
Andrew Tridgell
4dcc64d82d
AP_Scripting: added more params to revert script
2023-11-17 07:23:28 +11:00
muramura
8c27d81c6a
AP_RangeFinder: Move to a process that uses maximum value acquisition
2023-11-16 11:02:21 -08:00
Tom Pittenger
ac16f10ecd
AP_HAL_ChibiOS: hwdef kha_eth to show SerialManager params
2023-11-16 10:58:50 -08:00
Andrew Tridgell
4cb2562ee5
AP_DroneCAN: cope with null stats (for SLCAN interface)
...
this caused a crash on CubeOrange on boot if SLCAN is enabled
2023-11-15 23:52:49 -08:00
Andrew Tridgell
8ff2fa4fd9
AP_Mount: added gimbal rates for SIYI
...
this helps diagnose issues with gyro bias versus control when camera
is spinning
2023-11-16 16:57:49 +11:00
Andrew Tridgell
7472f76336
AP_Mount: set clock on SIYI
...
this means photos on microSD have correct date
2023-11-16 16:57:35 +11:00
Peter Barker
24f00ddaf7
GCS_MAVLink: add and use AP_MAVLINK_COMMAND_LONG_ENABLED
2023-11-16 10:50:21 +11:00
Peter Barker
9ff9f8d216
GCS_MAVLink: remove no-longer-required location_from_command_t(command_long)
2023-11-16 10:50:21 +11:00
Peter Barker
485fa80f1c
GCS_MAVLink: collapse un-needed method
2023-11-16 10:50:21 +11:00
Peter Barker
e0eacdc197
ArduPlane: handle DO_SET_MISSION_CURRENT as both long and int
2023-11-16 10:50:21 +11:00
Peter Barker
d7160aea2d
GCS_MAVLink: handle DO_SET_MISSION_CURRENT as both long and int
2023-11-16 10:50:21 +11:00
Peter Barker
b572fe80ec
GCS_MAVLink: handle request autopilot capabilities as both long and int
2023-11-16 10:50:21 +11:00
Tom Pittenger
d189730b9f
AP_DDS: fix defines to make astyle happy
2023-11-15 12:43:41 -08:00
Andrew Tridgell
8151ee36c7
AP_Networking: fixed build with gcc 11.x
2023-11-15 12:43:41 -08:00
Andrew Tridgell
4a773eabb2
AP_Networking: added SITL backend
...
this allows the net tests to run on SITL, and for DDS testing using
the SocketAPM API
2023-11-15 12:43:41 -08:00
Andrew Tridgell
c54e6ce44b
AP_Networking: added NET_TEST_IP for test server IP address
...
and default to same as default for DDS server
2023-11-15 12:43:41 -08:00
Andrew Tridgell
fbe2651840
AP_Networking: removed unuused send_udp in ChibiOS backend
2023-11-15 12:43:41 -08:00
Tom Pittenger
6cd24bb87b
AP_DDS: Add user-selectable UDP IP
2023-11-15 12:43:41 -08:00
Tom Pittenger
74f9b74fe7
AP_Networking: add get_str() accessor to IP address parms
2023-11-15 12:43:41 -08:00
Andrew Tridgell
4afd0f746b
AP_Networking: added networking test suite
2023-11-15 12:43:41 -08:00
Tom Pittenger
df600e5582
AP_HAL: Enable SocketAPM to use LwIP/ChibiOS
2023-11-15 12:43:41 -08:00
Tom Pittenger
4c70670445
AP_DDS: use AP_NETWORKING_BACKEND_ANY
2023-11-15 12:43:41 -08:00
Randy Mackay
da6f31d5c7
AP_RangeFinder: JRE rename data_buff_ofs
2023-11-15 19:10:05 +09:00
Peter Barker
6bd7024274
AP_RangeFinder: change JRE parsing to reduce RAM overhead
2023-11-15 19:10:05 +09:00
jfbblue0922
fef47303d2
AP_RangeFinder: add serial driver for JRE
2023-11-15 19:10:05 +09:00
Randy Mackay
265f19b396
SRV_Channel: fix scaled passthrough of ranges
2023-11-15 18:20:45 +11:00
Andrew Tridgell
901280902a
AP_Mount: allow for larger SIYI packets
...
needed for attitude packet
2023-11-15 13:17:54 +11:00
Andrew Tridgell
691b23db7d
AP_Mount: added sending of attitude and velocity for SIYI
...
will be used by SIYI for improved gimbal control
2023-11-15 13:17:54 +11:00
Jonathan Loong
0db1719c8f
AP_Compass: Add in QMC5883P Driver
2023-11-15 10:53:38 +11:00
Jonathan Loong
16c55a3bc1
AP_HAL_ChibiOS: Add in CarbonixF405 QMC5883P compass enable
2023-11-15 10:53:38 +11:00
Jonathan Loong
8d64d5215e
AP_Periph: CarbonixL496 crystal hwdef changes
2023-11-15 10:53:38 +11:00
Jonathan Loong
3f99891404
AP_BattMonitor: Merge in polynomial fit structure to FuelLevel_Analog
...
Update parameters and make current false
2023-11-15 10:52:10 +11:00
Peter Barker
044760cfb9
AP_Notify: document IS31FL3195 LED type for LED_TYPES parameter
2023-11-15 10:51:08 +11:00
Peter Barker
aac949e227
AP_Notify: add IS31FL3195 to default LED types
2023-11-15 10:51:08 +11:00
Peter Barker
2a2a103195
SITL: add JAE JRE simulator
2023-11-15 10:50:49 +11:00
Peter Barker
2af98a949b
AP_HAL_SITL: add JAE JRE simulator
2023-11-15 10:50:49 +11:00
jfbblue0922
c17907cadc
AP_Math: add CRC crc16_ccitt_r function
2023-11-15 10:50:49 +11:00
Andy Piper
7639761d28
AP_HAL_ChibiOS: correct neopixel bitwidth
...
Use 64-bit timestamps for dshot send checks
2023-11-14 11:06:25 +11:00
Andy Piper
ef5eccdf62
AP_HAL: correct neopixel bitwidth
2023-11-14 11:06:25 +11:00
Ryan Friedman
ef6105c5e0
AP_ExternalAHRS: Specify brand on all log messages
...
* The VN driver was likely written before there were multiple types
* The log messages make it seem like core AHRS problems rather than
issues directly with VN
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-14 11:02:26 +11:00
Randy Mackay
0f0bc78de9
AP_OpticalFlow: increase scaler param desc ranges
2023-11-14 10:57:30 +11:00
Henry Wurzburg
4681e5fba6
hwdef:correct JFB110 defaults
2023-11-14 10:55:33 +11:00
olliw42
61aec54ea7
AP_RCTelemetry: throttle CRSF request RX device info messages
2023-11-14 10:36:56 +11:00
Ryan Friedman
201c66e417
AP_GPS: Fix GSOF autobaud detection msg
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-14 10:26:01 +11:00
Iampete1
55242445b2
AP_Motors: example: support setting and testing DUAL_MODE
2023-11-14 10:25:11 +11:00
Iampete1
aa8c477a26
AP_Motors: Heli_Dual: refactor swashplate mixing
2023-11-14 10:25:11 +11:00
Gone4Dirt
2fe100d7bc
AP_Motors_Heli: white space
2023-11-14 10:24:03 +11:00
Gone4Dirt
927418b87c
AP_Motors_Heli: Fix DDFP thrust linearisation by using min max pwm in servo library
...
AP_Motors_Heli: Add H_YAW_TRIM param conversion for DDFP tails
2023-11-14 10:24:03 +11:00
Gone4Dirt
5bd67d8e04
AP_Motors: Set default heli thrust linearisation to linear.
2023-11-14 10:24:03 +11:00
Nick Exton
59c5092810
GCS_MAVLink: Handle param2 (reset) in DO_SET_MISSION_CURRENT cmd
2023-11-14 10:22:45 +11:00
Nick Exton
a29cd0321b
AP_Mission: Add is_valid_index() function
2023-11-14 10:22:45 +11:00
Nick Exton
0567d8576e
GCS_MAVLink: Add explicit handling of DO_JUMP_TAG
2023-11-14 10:22:45 +11:00
Nick Exton
12642b5793
AP_Mission: Remove unused rewind param from set_current_cmd() (NFC)
2023-11-14 10:22:45 +11:00
Tom Pittenger
c9a3cb13c1
AP_Networking: rename _backend.h to _Backend.h
2023-11-14 08:47:31 +11:00
Tom Pittenger
bd97dc4de5
AP_Networking: cleanup backend defines
2023-11-14 08:47:31 +11:00
Andrew Tridgell
2f9bfb648f
HAL_ChibiOS: default RTS pins to PULLDOWN
...
this avoids issues with SiK and RFD900x radios getting stuck in
bootloader mode due to a high RTS pin on power on.
We did this for Pixhawk6C in this PR:
https://github.com/ArduPilot/ardupilot/pull/24169
this now applies it to all boards
2023-11-12 07:26:50 +11:00
Henry Wurzburg
3811de3e25
AP_OSD:correct xy limits for panels
2023-11-12 07:08:28 +11:00
muramura
e25d4dcad5
AP_Parachute: Change to Boolean value
2023-11-11 09:06:42 +09:00
muramura
87f4509472
AP_AHRS: Change to Boolean value
2023-11-11 09:06:42 +09:00