Commit Graph

12752 Commits

Author SHA1 Message Date
Peter Barker dee3bdbae9 AP_SerialManager: correct parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 58a03b83ca AP_Terrain: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker daf9a45efd AP_TECS: correct parameter metadata
Correct incomplete Description of LAND_PDAMP

Add DisplayName for LAND_PDAMP
2016-10-27 09:15:03 -07:00
Peter Barker c1f455f904 AP_RangeFinder: correct parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker ecd061dad5 AP_RPM: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 06b616f761 AP_Motors: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 9d0d451c48 AP_Mission: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 755e76ced9 AP_L1_Control: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 7b75a4ec09 AP_GPS: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker e4001e67e2 AP_Compass: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker a660ffa3fc AP_BoardConfig: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker dbecb1bc25 AP_Baro: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 42f3f7195b AP_Airspeed: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 9a8d3d6e7c AP_AHRS: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 71e42a4eac APM_Control: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Peter Barker 2e2d39e628 AC_AttitudeControl: add missing parameter metadata 2016-10-27 09:15:03 -07:00
floaledm 7045013933 AP_Frsky_Telem: use airspeed value w/o constraints of ground speed and AHRS_WIND_MAX 2016-10-27 11:11:38 -03:00
hiro2233 cdfd057690 AP_HAL_LINUX: Added urus macro RCInput_RPI 2016-10-27 11:51:53 -02:00
hiro2233 cae0c11720 AP_HAL_Linux: Added URUS Macro to Util_RPI 2016-10-27 11:51:32 -02:00
hiro2233 37877f1530 AP_HAL_Linux: Added URUS macro to Scheduler 2016-10-27 11:51:32 -02:00
hiro2233 7000124f6a AP_HAL_Linux: Added URUS Macro for GPIO_RPI and UtilRPI 2016-10-27 11:51:32 -02:00
hiro2233 a7b79dc0e2 AP_HAL_Linux: GPIO_RPI: Added URUS Macro. 2016-10-27 11:51:32 -02:00
hiro2233 3742c3b243 AP_HAL: Added subtype board URUS.
This is a linux system based with Raspberry Pi B+, it's a automated
domotic system using APM framework.
2016-10-27 11:51:31 -02:00
Lucas De Marchi 473add51f7 AP_HAL_Linux: RPIOUARTDriver: remove dma mention
There's no dma going on here, it's just a normal SPI transfer.
2016-10-27 10:35:01 -03:00
Lucas De Marchi d3b5089a12 AP_HAL_VRBRAIN: UARTDriver: remove commented out code
This is not working and there's no reason to keep it around.
2016-10-27 10:35:01 -03:00
Lucas De Marchi a3140df24a AP_HAL_PX4: UARTDriver: remove commented out code
This is not working and there's no reason to keep it around.
2016-10-27 10:35:01 -03:00
Lucas De Marchi ec4d1eefca AP_HAL_PX4: UARTDriver: fix trailing whitespaces 2016-10-27 10:35:01 -03:00
Lucas De Marchi d60b4842b6 AP_HAL_Linux: reduce scope of dummy buffer 2016-10-27 10:35:01 -03:00
Lucas De Marchi 76f1e4243a AP_HAL_Linux: remove double assignment
_dma_packet_tx.crc is already assigned below, we don't neet to set it to
0 before. While at it move the assignment to .crc up and fix coding
style.
2016-10-27 10:35:01 -03:00
Lucas De Marchi c898b28962 AP_HAL_Linux: use MIN where possible 2016-10-27 10:35:01 -03:00
Lucas De Marchi 05a7eef1a2 RingBuffer: use explict "if" and return early
Remove confusing use of ternary operator together with assign + load.
No change in behavior.
2016-10-27 10:35:01 -03:00
Andrew Tridgell 82365f8670 AP_NavEKF2: save some memory in the position offsets in EKF2
we don't need to copy that vector3f for every sample. A uint8_t does
the job
2016-10-27 17:09:06 +11:00
Andrew Tridgell a05d216ce4 AP_NavEKF: make posOffset const ref for optflow 2016-10-27 15:45:40 +11:00
Andrew Tridgell 772209b3f3 AP_AHRS: make posOffset a const reference 2016-10-27 15:45:24 +11:00
Andrew Tridgell 703ef0ca0e AP_RangeFinder: added get_primary() API 2016-10-27 15:45:07 +11:00
Andrew Tridgell afe2c31ae7 AP_Inertial_Sensor: use const reference 2016-10-27 15:06:11 +11:00
Andrew Tridgell af332cb336 AP_GPS: use const reference 2016-10-27 15:05:58 +11:00
Andrew Tridgell 27cdf220de AP_RangeFinder: use const reference 2016-10-27 14:59:10 +11:00
Andrew Tridgell 047a09c391 AP_OpticalFlow: use const reference
saves stack space and cpu
2016-10-27 14:58:59 +11:00
priseborough f722ddf615 AP_RangeFinder: Update parameter documentation
Add brief description of body frame conventions.
2016-10-27 14:54:45 +11:00
priseborough 1bde180f98 AP_OpticalFlow: Update parameter documentation
Add brief description of body frame conventions.
2016-10-27 14:54:45 +11:00
priseborough 1dec6dd9b0 AP_GPS: Update parameter documentation
Add brief description of body frame conventions.
2016-10-27 14:54:45 +11:00
priseborough 7460d97c9a AP_InertialSensor: Update parameter documentation
Add brief description of body frame conventions.
2016-10-27 14:54:45 +11:00
priseborough 470f5c4562 AP_InertialSensor: Correct SITL IMU1 accel for position in body frame 2016-10-27 14:54:45 +11:00
priseborough d830f68901 SITL: Add angular acceleration to simulator states
The calculation used is an approximation to work around the lack of angular acceleration in the interface with the flight dynamics model.
2016-10-27 14:54:44 +11:00
priseborough 747f3a8cfd AP_HAL_SITL: Simulate range finder position offset 2016-10-27 14:54:44 +11:00
priseborough a9f63abc6f AP_HAL_SITL: simulate effect of GPS antenna offset 2016-10-27 14:54:44 +11:00
priseborough 3afe2b1694 AP_HAL_SITL: simulate optical flow sensor body frame position offset 2016-10-27 14:54:44 +11:00
priseborough 27dab27565 SITL: Add parameters for sensor position offsets in body frame 2016-10-27 14:54:44 +11:00
priseborough 4499ed437c AP_RangeFinder: remove space before preprocessor directive 2016-10-27 14:54:44 +11:00
priseborough 3ca6c12344 AP_RangeFinder: Improve consistency of parameter naming 2016-10-27 14:54:44 +11:00
priseborough c93c3d54f3 AP_NavEKF2: Don't correct for zero IMU position offset
The IMU offset correction involves a significant number of floating point operations and most users will leave the offset parameter at zero.
2016-10-27 14:54:44 +11:00
priseborough 1890bbdafa AP_NavEKF2: Don't correct GPS for zero position offset 2016-10-27 14:54:44 +11:00
priseborough f025c96e63 AP_NavEKF2: Don't correct range finder for zero position offset 2016-10-27 14:54:43 +11:00
priseborough 9a0ce1d5eb AP_NavEKF2: Don't correct flow sensor for zero position offset 2016-10-27 14:54:43 +11:00
priseborough b40016db62 AP_NavEKF2: Fix documentation errors 2016-10-27 14:54:43 +11:00
priseborough 54a431a51d AP_InertialSensor: Update position offset parameter documentation
Notify users of the potential for velocity noise when using larger offset values..
Specific advice in terms of values has not been provided because it is highly dependent on Gyro noise levels.
2016-10-27 14:54:43 +11:00
priseborough 13ca62b1c7 AP_NavEKF2: Correct velocity and position outputs for IMU offset
This can improve position hold performance where it is not practical to have the IMU located at the centroid.
Although this enables the effect of IMU position offsets to be corrected, users will still need to be instructed to place the IMU as close to the vehicle c.g. as practical as correcting for large offsets makes the velocity estimates noisy.
2016-10-27 14:54:43 +11:00
priseborough 21dcf42c27 AP_NavEKF2: Add missing documentation 2016-10-27 14:54:43 +11:00
priseborough 8922861359 AP_NavEKF2: Correct optical flow data for sensor position offset
Correction requires the body rates averaged across the flow sensor sampling interval. This data has been added to the sensor buffer.
The body rate data from the flow sensor driver does not contain the Z component, so an equivalent value sampled from the navigation IMU has been used instead.
The variable omegaAcrossFlowTime has been moved out of the class and into the only function that uses it.
2016-10-27 14:54:43 +11:00
priseborough 16f021c466 AP_NavEKF2: Correct range finder data for body frame position offset 2016-10-27 14:54:43 +11:00
priseborough e884e9cc6e AP_NavEKF2: Correct GPS data for antenna body frame offset 2016-10-27 14:54:43 +11:00
priseborough 064a106808 AP_NavEKF2: Get IMU accelerometer body position offset data 2016-10-27 14:54:42 +11:00
priseborough 397033b7c3 AP_NavEKF2: Add flow sensor body position offset to data buffer 2016-10-27 14:54:42 +11:00
priseborough 92c086b40e AP_NavEKF2: Add rangefinder body position offset to data buffer 2016-10-27 14:54:42 +11:00
priseborough 3148ad4623 AP_NavEKF2: Add GPS antenna position offset data to data buffer 2016-10-27 14:54:42 +11:00
priseborough fd905c23e1 AP_NavEKF2: Add body position offset to optical flow interface 2016-10-27 14:54:42 +11:00
priseborough 8160eca47e AP_NavEKF: update flow sensor interface
Adds a position offset which is not used by the backend
2016-10-27 14:54:42 +11:00
priseborough 6069c37b19 AP_AHRS: add position offset to optical flow interface 2016-10-27 14:54:42 +11:00
priseborough 9c7ab639a1 AP_OpticalFlow: Add parameters for flow sensor position offset 2016-10-27 14:54:41 +11:00
priseborough 24f9e7365d AP_RangeFinder: Add parameters defining sensor position offset 2016-10-27 14:54:41 +11:00
priseborough 6db93d8a21 AP_InertialSensor: Add parameters defining accelerometer position offset 2016-10-27 14:54:41 +11:00
priseborough b51c9dea6c AP_GPS: Add parameters defining antenna offset in body frame 2016-10-27 14:54:41 +11:00
Murilo Belluzzo a91da2e803 DataFlash: Change ::bufferspace_available return type
from 'uint16_t' to 'uint32_t' to avoid overflow (possible in at least
two implementations: Block and File).
2016-10-27 14:24:11 +11:00
Murilo Belluzzo 3f1896b9b7 RingBuffer: Remove 'old style' version 2016-10-27 14:24:10 +11:00
Murilo Belluzzo c112e1c889 DataFlash: Make use of ByteBuffer class
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.

Although the exchange opens opportunities for improvement and
simplification of this class.
2016-10-27 14:24:10 +11:00
Lucas De Marchi 80cf1207b7 AP_HAL_VRBRAIN: UARTDriver: fix writting with failures
When the buffer wraps and we do it in 2 steps, we can't actually do the
second part if it fails or if we wrote less bytes than we intended,
otherwise we will corrupt the data being sent.
2016-10-27 14:23:43 +11:00
Lucas De Marchi 68fc08fe52 AP_HAL_VRBRAIN: fix resetting TX buffer
We can't give the TX buffer 16 bytes more since next time begin() is
called it will compare the buffer size to the value the caller is trying
to set.  In this case we would free and alloc the buffer again each time
begin was called.
2016-10-27 14:23:43 +11:00
Murilo Belluzzo e8bfcf02a0 VRBRAIN UARTDriver: Make use of ByteBuffer class
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.

Although the exchange opens opportunities for improvement and
simplification of this class.

While at it, just like in the write case, explain why we are stopping.
2016-10-27 14:23:43 +11:00
Lucas De Marchi 4df627693d AP_HAL_PX4: UARTDriver: fix writting with failures
When the buffer wraps and we do it in 2 steps, we can't actually do the
second part if it fails or if we wrote less bytes than we intended,
otherwise we will corrupt the data being sent.

While at it, just like in the write case, explain why we are stopping.
2016-10-27 14:23:43 +11:00
Lucas De Marchi 4346f1dd83 AP_HAL_PX4: fix resetting TX buffer
We can't give the TX buffer 16 bytes more since next time begin() is
called it will compare the buffer size to the value the caller is trying
to set.  In this case we would free and alloc the buffer again each time
begin was called.
2016-10-27 14:23:43 +11:00
Murilo Belluzzo c7a65a026c AP_HAL_PX4: UARTDriver: Make use of ByteBuffer class
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.

Although the exchange opens opportunities for improvement and
simplification of this class.
2016-10-27 14:23:43 +11:00
Lucas De Marchi 26650049c0 AP_HAL_Linux: UARTDriver: fix writting/reading with failures
When the buffer wraps and we do it in 2 steps, we can't actually do the
second part if it fails or if we wrote less bytes than we intended,
otherwise we will corrupt the data being sent.
2016-10-27 14:23:42 +11:00
Murilo Belluzzo ce81c45f80 AP_HAL_Linux: UARTDriver: Make use of ByteBuffer class
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.

Although the exchange opens opportunities for improvement and
simplification of this class.
2016-10-27 14:23:42 +11:00
Murilo Belluzzo 8526b25654 RingBuffer: Add a faster method to read a single byte 2016-10-27 14:23:42 +11:00
Michael du Breuil deec4ec6af Compass: Rework compass calibrator
Summary of significant changes:
  -Autsave doesn't depend on STREAM_EXTRA3
  -Don't risk only saving one compass on copter if CAL_ALWAYS_REBOOT is set
  -Only calibrate compasses that are both health and marked for use (there was a inconsistency in handling the mask)
  -Fix incorrect failure reporting on DO_ACCEPT_MAG_CAL with a mask of 0 if a channel was specifically not started
  -Fix not starting the buzzer if the delay is set to 0 seconds
  -Always send MAG_CAL_REPORT until its acknowledged
  -Correct the field in MAG_CAL_REPORT for autosave to indicate if the compass had actually been saved, rather then being scheduled to be saved
  -Remmove unused public interfaces
2016-10-27 14:04:33 +11:00
floaledm 6869dace08 AP_Frsky_Telem: moved msg queueing of fw string 2016-10-26 09:49:30 -07:00
floaledm 56432f04d3 AP_Frsky_Telem: fixed airspeed; now same as VFR_HUD 2016-10-26 09:36:22 -07:00
Mathieu OTHACEHE 5e42800b5e Disco: add LED support
Use RGBLed generic implementation to support Disco LED.
2016-10-26 11:56:11 -03:00
Leonard Hall 42672de606 AC_PosControl: set Alt_Hold filter for PID not just D
We normally don't use the D term here so setting the filter for PID not
just D lets us smooth the throttle response.
2016-10-26 21:00:43 +09:00
Francisco Ferreira 5a7f9a38fe DataFlash: fix RCIN and RCOU structure types 2016-10-26 10:10:19 +09:00
murata 762a66c9e5 AP_GPS_SBF: Adjust the initial value of HDOP 2016-10-26 09:54:59 +11:00
Peter Barker 2bd13af43d AP_Param: unhide groups when generating parameters in autotest 2016-10-26 09:53:14 +11:00
Peter Barker dd7d41b1f3 SITL: unhide groups when generating parameters in autotest 2016-10-26 09:53:14 +11:00
Andrew Tridgell d2287caf1c HAL_SITL: removed old servo slew rate code 2016-10-25 20:39:38 +11:00
Andrew Tridgell 5e03358b0b SITL: added servo filtering
SIM_SERVO_SPEED is servo time constant in seconds
2016-10-25 20:39:38 +11:00
Lucas De Marchi 539b727e5e AP_HAL_Linux: Remove misleading constant
The constant passed to cflag is BOTHER, meaning the actual baud is set
in the other specific members.  Don't define B* constants as they are
misleading here and this is why it doesn't work with e.g.
cfset[io]speed()... that function expect a B* constant which in Linux
is not the speed, but an index to an array with speeds.
2016-10-25 16:55:33 +11:00
Francisco Ferreira 3a89421c70 AP_BattMonitor: remove Bebop fixed capacity
Bebop, Bebop2 and Disco all use this class but it was always setting the capacity to the Bebop one, overriding the parameter
2016-10-24 09:24:11 -03:00
Martin Evans 0e19b8c9a0 AP_HAL_Linux: Set initial rotation on Dark to None 2016-10-24 10:00:24 -02:00
Martin Evans 6f6112d7c2 AP_HAL_Linux: Add setting for GPIO for Dark board
Just like other RPI-based boards.
2016-10-24 10:00:24 -02:00
Martin Evans d2d3119b66 AP_HAL_Linux: PCA9685: Add quinary address 2016-10-24 10:00:06 -02:00
Martin Evans 37b85fd3cd AP_HAL: Add Dark Linux board 2016-10-24 09:59:02 -02:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Peter Barker d188504b8b AC_Fence: remove unused variable _boundary_revalidate 2016-10-24 08:57:56 -02:00
Peter Barker 6e72c899d1 AP_GPS: AP_GPS_GSOF: remove unused variable 2016-10-24 08:57:56 -02:00
Peter Barker 216a6493c9 AP_Compass: AP_Compass_LSM9DS1: remove unused variable 2016-10-24 08:57:56 -02:00
Peter Barker 64154feaef DataFlash: remove unused semaphore variables 2016-10-24 08:57:56 -02:00
Peter Barker c664eec93b AC_WPNav: remove unused variable _last_update 2016-10-24 08:57:56 -02:00
Peter Barker 6f200cdc3d SITL: SIM_Rover: remove unused variables 2016-10-24 08:57:55 -02:00
Peter Barker e17a71c6cc AP_GPS: AP_GPS_NOVA: remove unused variables 2016-10-24 08:57:55 -02:00
Peter Barker d3422d1653 SITL: SIM_Tracker: remove unused variable 2016-10-24 08:57:55 -02:00
Peter Barker 5dad8745d5 DataFlash: remove bogus function declaration 2016-10-24 08:57:55 -02:00
Andrew Tridgell 9d6a5c6f04 HAL_PX4: make ready_to_arm state latching
this fixes a race condition in the handling of the px4io safety switch
2016-10-24 13:36:04 +11:00
Peter Barker 17883f6683 AP_InertialSensor: fix INS_generic example (call BoardConfig.init()) 2016-10-24 11:00:22 +09:00
Andrew Tridgell 2a44e6a7d7 HAL_PX4: cope with no px4io on FMUv2
don't open px4fmu twice
2016-10-23 17:15:32 +11:00
Andrew Tridgell 68f0777dac AP_Param: fixed bug with deeply nested parameter trees
enumeration could loop forever if the IDs overlapped due to 8 bit
masking
2016-10-23 15:27:42 +11:00
Andrew Tridgell 7bf81c44b0 AP_BoardConfig: allow programmatic setting of default safety mask 2016-10-21 11:53:34 +11:00
Andrew Tridgell 0bd3b8ecbd AP_BoardConfig: fixed bug in fmu safety mask set 2016-10-21 09:10:55 +11:00
Andrew Tridgell c825c7b4cc HAL_PX4: disable FMU outputs again on re-engaging of safety switch 2016-10-21 09:10:55 +11:00
Andrew Tridgell 8cb93ae7c3 AP_BoardConfig: call PWM_SERVO_IGNORE_SAFETY on fmu as well 2016-10-21 09:10:55 +11:00
Andrew Tridgell 07c09ad6dc AP_BoardConfig: expanded bitmask to 14 channels for safety mask 2016-10-21 09:10:55 +11:00
Andrew Tridgell d2e4b73eda Revert "GCS_MAVLink: default to MAVLink2 enabled"
Reverting change to MAVLink2 by default until SiK radio firmware issue
with ECC is sorted out
2016-10-21 07:55:02 +11:00
Andrew Tridgell 1171b33419 AP_TECS: added TECS_SYNAIRSPEED parameter
this allows for the synthetic airspeed estimate to be used in TECS
2016-10-20 13:22:39 +11:00
Andrew Tridgell 7ee42d3a7e AP_TECS: fixed missing doc comment 2016-10-20 13:22:22 +11:00
priseborough 9779511425 AP_NavEKF2: Fix bug in median filter code 2016-10-19 19:45:00 +09:00
priseborough d0ba259d0d AP_NavEKF: Fix bug in median filter code 2016-10-19 19:44:58 +09:00
Peter Barker 6ccf36439d AP_Frsky_Telem: actually set _ap.value flags based in is_flying
Closes #5017
2016-10-18 22:17:07 -07:00
Randy Mackay e6e6e36da7 AP_GPS_MAV: fix hdop conversion 2016-10-18 20:24:55 +09:00
Andrew Tridgell a847520da8 GCS_MAVLink: send RC_CHANNELS_RAW if using MAVLink1
this fixes issue #5010
2016-10-18 18:16:16 +11:00
Julien Beraud 20dcd6e082 RCOutput_Bebop: fix motor order
Accidentally pushed in commit 298f7bffb9
The order of the motors shouldn't have been changed on version 5 because
it is specific to older versions of the ESC controller firmware
2016-10-17 20:55:49 +11:00
Georacer 54c1efe5e1 Connection to last_letter once again successful 2016-10-17 09:37:23 +11:00
Andrew Tridgell 24d3399fd5 AP_Module: report loaded hooks on startup
useful for debugging
2016-10-17 09:31:51 +11:00
Andrew Tridgell 33bff3c79c HAL_Linux: fixed transmitter failsafe with SBUS RCInput 2016-10-17 06:53:33 +11:00
Andrew Tridgell 8f88d7c784 AP_HAL: fixed comment on XPlus channels
thanks for Francisco for noticing
2016-10-17 06:49:40 +11:00
Andrew Tridgell 110355f14e HAL_Linux: fixed SRXL and DSM
fixed default decoder state and fixed mic-recognition of SRXL as DSM
2016-10-16 21:31:37 +11:00
Andrew Tridgell 4d44591e62 AP_HAL: fixed decoding of XPlus channels 2016-10-16 19:05:19 +11:00
Andrew Tridgell e9633553fb HAL_Linux: update for changed SRXL API 2016-10-16 19:05:19 +11:00
Andrew Tridgell ec8c22f26e AP_HAL: support up to 20 channels on SRXL
tested with 18 channels on a DSM18 transmitter with a AR7700 receiver
with SRXL port
2016-10-16 19:05:19 +11:00
Andrew Tridgell ece0a8721f AP_HAL: added standalone test program for dsm
useful for debugging
2016-10-16 19:05:19 +11:00
Andrew Tridgell 03f9496549 HAL_Linux: lock onto a single decoder on the 115200 port 2016-10-16 19:05:19 +11:00
Andrew Tridgell 513156a4cc HAL_Linux: make 115200 R/C decoders return a bool 2016-10-16 19:05:19 +11:00
Andrew Tridgell 710d08da6d HAL_Linux: support SRXL R/C input 2016-10-16 19:05:19 +11:00
Andrew Tridgell 7b3d0234d1 AP_HAL: added an SRXL protocol decoder
SRXL ports are commonly found on newer spektrum receivers like the AR7700
2016-10-16 19:05:18 +11:00
murata bb1a787852 AP_Scheduler: To add a comment to _loop_rate_hz variable. 2016-10-16 00:02:40 -07:00
Andrew Tridgell f9dd31b6e5 RC_Channel: support automatic servo trimming 2016-10-16 15:20:47 +11:00
Lucas De Marchi e6d5bac527 AP_Param: don't used reserved word in macros
`class` is a reserved word and should not be used as macro arguments.
It's very common in C++ to use "clazz" instead in these cases.
2016-10-15 15:19:17 -03:00
Andrew Tridgell 792f3b8a15 GCS_MAVLink: added handle_rc_bind() 2016-10-15 21:42:38 +11:00
murata ba60cce0c1 AP_HAL: simplify the processing of milliseconds from the time 2016-10-15 18:33:54 +09:00
Andrew Tridgell f01f711ff6 GCS_MAVLink: added accept_packet() hook
this will allow vehicles to control whether packets are accepted by
GCS sysid or not
2016-10-15 17:11:01 +11:00
Andrew Tridgell 992bf2368e RC_Channel: cope with SERVO_RNG_ENABLE changing while booted
this prevents a one second throttle up on scaled ESCs when
enabling/disabling the servo output mapping
2016-10-15 16:59:37 +11:00
Andrew Tridgell 4a9ddf52e0 RC_Channel: constrain output to servo range
don't allow servos past configured range in any mode
2016-10-15 16:59:36 +11:00
Andrew Tridgell 2ceddddd3b RC_Channel: don't call output() in SRV_Channel
we may need to run another mixer
2016-10-15 16:59:36 +11:00
Andrew Tridgell 78ef3b77c6 RC_Channel: added disable_passthrough() method 2016-10-15 16:59:36 +11:00
Andrew Tridgell 2ec439d7e3 RC_Channel: added set_esc_scaling() to SRV_Channels 2016-10-15 16:59:36 +11:00
Andrew Tridgell 73b9123495 RC_Channel: added set_trim() API to SRV_Channels object 2016-10-15 16:59:35 +11:00
Andrew Tridgell c7f8b255e7 RC_Channel: added SRV_Channels object for remapping output channels
this allows for decoupling RC input ranges from servo output ranges
2016-10-15 16:59:35 +11:00
Andrew Tridgell fea7903aa8 RC_Channel: added get_radio_out_normalised() 2016-10-15 16:59:35 +11:00
Andrew Tridgell 96c7d9dde8 RC_Channel: make output_trim() go via _radio_out
this ensures that _radio_out always contains the value that would be
output to the channel. This will be used by the SRV_Channels object
2016-10-15 16:59:35 +11:00
Leonard Hall bead957a78 AP_MotorsMulticopter: limit hover throttle 2016-10-15 11:27:53 +09:00
Peter Barker e71c71fcac AP_HAL: correct casting of get_system_clock_ms 2016-10-14 18:41:56 +11:00
Jonathan Challinger 8df4add729 AC_PrecLand: trust initial velocity less 2016-10-14 10:46:22 +09:00
Jonathan Challinger ec73f563ad AC_PrecLand: do not fuse EKF velocity 2016-10-14 10:46:16 +09:00
Jonathan Challinger 7405f82d61 AC_PrecLand: add ekf to estimate vehicle-relative target velocity 2016-10-14 10:46:05 +09:00
Jonathan Challinger 5a8db4f271 AC_PosControl: add interface to override horizontal velocity process variable 2016-10-14 10:46:01 +09:00
Jonathan Challinger 25a14fe0dc AP_AHRS: add interface to retrieve corrected delta velocities in NED frame 2016-10-14 10:45:58 +09:00
Andrew Tridgell c1bf23e090 GCS_MAVLink: fixed comment 2016-10-14 11:40:36 +11:00
Randy Mackay 4808664fb6 AC_Avoidance: allow use of AP_Proximity 2016-10-13 20:21:07 +09:00
Randy Mackay c3087edbe8 AP_Proximity: add library and SF40C driver 2016-10-13 20:21:07 +09:00
Randy Mackay cc0bfcddcb AP_SerialManager: add Lidar360 to protocol list
This is used for the proximity sensor
2016-10-13 20:21:07 +09:00
Andrew Tridgell 53260969bb GCS_MAVLink: removed deprecated RC_CHANNELS_RAW and use RC_CHANNELS only 2016-10-13 21:23:39 +11:00
Andrew Tridgell e78651e8f2 HAL_PX4: fixed DSM bind on Pixracer 2016-10-13 19:58:00 +11:00
Andrew Tridgell 5e829e7720 GCS_MAVLink: most users don't have signing keys
prevent noise on startup
2016-10-13 19:58:00 +11:00
Randy Mackay 9722c3a1c3 DataFlash: fix logging of ekf core 2016-10-13 15:22:59 +09:00
John Hsu fc13efa673 SITL: update SIM_Gazebo SITL interface servo packet to have 16 floats, matching sitl_input struct. 2016-10-13 12:03:20 +11:00
John Hsu a8cf38b366 SITL: implement Gazebo SITL for IRLock tracking. 2016-10-13 12:03:20 +11:00
Jonathan Challinger e20687fbce AP_AHRS: cache trim rotation 2016-10-13 10:02:14 +11:00
Jonathan Challinger 80d9092993 AP_Math: remove rotateXY and rotateXYinv 2016-10-13 10:02:14 +11:00
Jonathan Challinger dac59cb5da AP_NavEKF2: use exact matrix for trim rotation 2016-10-13 10:02:14 +11:00
Jonathan Challinger 3eba985afd AP_NavEKF: use exact matrix for trim rotation 2016-10-13 10:02:13 +11:00
Jonathan Challinger 5ff78b8e47 AP_AHRS: fix rotation of acceleration into earth frame 2016-10-13 10:02:13 +11:00
Jonathan Challinger a03fa2d3cf AP_AHRS: use exact matrix for trim rotations 2016-10-13 10:02:13 +11:00
Andrew Tridgell 7f09d20e3b HAL_Linux: implement cork and push for remaining RCOutput backends 2016-10-13 10:00:04 +11:00
Andrew Tridgell c8179a0887 HAL_Linux: implement cork/push for RCOutput_AioPRU 2016-10-13 10:00:04 +11:00
Andrew Tridgell e356797888 AP_HAL: make cork() mandatory in RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell 0640b6539c HAL_Linux: implement cork()/push() for Raspilot 2016-10-13 10:00:04 +11:00
Andrew Tridgell 1d6e4673da HAL_Empty: add cork() and push() for RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell 7ea75aaf95 HAL_QURT: implement cork() and push() for RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell 5530e3782d HAL_VRBrain: fixed cork() for RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell c493ba81e4 HAL_PX4: fixed cork() for RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell a80eea5de4 HAL_Linux: implement cork()/push() for HAL_Linux RCOutput_Sysfs 2016-10-13 10:00:04 +11:00
Andrew Tridgell 97d0553938 HAL_SITL: implement cork() on RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell 7cd7f03d56 AP_Motors: fixed use of trim on heli servos
this was broken by the servo range 0 to 1 changes
2016-10-13 09:34:48 +11:00
Andrew Tridgell 0cd3054a4c HAL_Linux: document the Disco PWM pinout 2016-10-12 21:41:49 +11:00
Andrew Tridgell c64a020384 GCS_MAVLink: default to MAVLink2 enabled
this changes the default to enable MAVLink2 on USB and the primary
telemetry port. Note that unless signing is enabled it won't send a
MAVLink2 packet until the GCS sends a MAVLink2 packet
2016-10-12 11:35:50 +11:00
ShingoMatsuura 8432c5fb4a AP_RangeFinder: remove number_detections member variable and add number_detections reference argument to parse_response 2016-10-11 07:56:37 -03:00
ShingoMatsuura 43f2482abd AP_RangeFinder: modify spelling and change C type cast to static_cast 2016-10-11 07:56:37 -03:00
ShingoMatsuura 6123fad124 AP_RangeFinder: change error and ok status defines to LeddarOne_Status enum 2016-10-11 07:56:37 -03:00
Jonathan Challinger 77dbf99cee AC_PosControl: fix bug related to ekfNavVelGainScaler 2016-10-11 15:25:59 +09:00
Lucas De Marchi ae53920e5b build: don't build examples with old build system
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file.  Having the makefiles
there is misleading since people try to build and realize the build is
broken.
2016-10-11 13:03:08 +11:00
Gustavo Jose de Sousa 06c3102701 SITL: SIM_Calibration: bring angular velocity controller back
And fix header documentation.
2016-10-11 12:58:37 +11:00
Andrew Tridgell 9caf44b494 AP_GPS: update drivers for changed inject_data() API
need 16 bit length
2016-10-11 11:00:35 +11:00
Andrew Tridgell 500df1edf2 AP_GPS: support GPS_RTCM_DATA fragmented MAVLink message
support re-assembly of RTCM data packets
2016-10-11 11:00:35 +11:00
Michael du Breuil cf5e79f80e AP_GPS: ublox support user controlled rate updates
Also corrects accepting bad nav rates as configured, and fixes a incorrect
index as to which GPS is being updated
2016-10-11 10:44:51 +11:00
Michael du Breuil 86c2b1d84a AP_GPS: u-blox Remove 5Hz warning
The warnings test case is better covered by the rest of the driver
while it is performing the normal settings audit.
2016-10-11 10:44:51 +11:00
Michael du Breuil 3e3f539a6a AP_GPS: Raise target baud of u-blox devices
A knockon effect is that we need less config strings as raw logging
on u-blox will use the same baud rates
2016-10-11 10:44:50 +11:00
floaledm 49e47fd679 AP_Frsky_Telem: airspeed scaling factor fix 2016-10-10 15:29:49 -07:00
Leonard Hall 0a56d69d54 AP_MotorsMulticopter: Use same throttle value used by motors 2016-10-10 16:40:08 +09:00
priseborough 5d09c78f34 AP_NavEKF2: Always perform optical flow takeoff check when receiving data
A specialised takeoff check is now always performed when we receive new flow data as the default behaviour is to try and use flow data whenever it is received, rather than limit its use to a use to a flow-only mode of operation that had to be selected via user parameter.
2016-10-10 14:49:48 +09:00
priseborough a75a383ef2 AP_NavEKF2: Update protection for out of focus flow data 2016-10-10 14:49:41 +09:00
priseborough 635826c056 AP_NavEKF2: Fix reporting of terrain estimator innovations
Terrain height is relevant whenever optical flow data is present
2016-10-10 14:49:35 +09:00
priseborough b0072b587c AP_NavEKF2: fix reporting of optical flow use status 2016-10-10 14:49:24 +09:00
priseborough ed9ecb28fb AP_NavEKF2: Enable entry into relative position mode on start-up 2016-10-10 14:49:21 +09:00
priseborough e0b8c54194 AP_NavEKF: Update GPS type parameter description 2016-10-10 14:49:18 +09:00
priseborough f9018fcc1b AP_NavEKF2: Enable simultaneous optical flow and GPS use
Enables simultaneous use of GPS and optical flow data with automatic fallback to relative position mode if GPS is lost and automatic switch-up to absolute position status if GPS gained/re-gained.
2016-10-10 14:49:02 +09:00
priseborough ab55991b33 AP_NavEKF2: Report position jumps due to lane switches
Also moves code required to update reset data due to lane switches into separate functionscto improve readability.
2016-10-10 11:56:14 +09:00
murata 36b5d43efb AC_Avoid: delete variable that is only used once in a simple calculation 2016-10-05 16:25:57 +09:00
Andrew Tridgell 2fab15dcd5 AP_TECS: added use_synthetic_airspeed() API
used by quadplane during transitions
2016-10-05 11:52:34 +11:00
Andy Little 0d113b265c Examples: fix examples for px4
The change to use AP_BoardConfig messed up the examples. Here are some
updated but there are plenty more to do.
2016-10-04 12:50:47 -03:00
Murilo Belluzzo 0b86532b5c Global: Remove '\r' character from all source code files 2016-10-03 22:13:27 -03:00
Julien Beraud 714c8fd318 AP_InertialSensor_MPU6000: Add support for fsync bit for Bebop
Already present on Disco
2016-10-03 12:20:03 -03:00
Andy Little 4b2eedac05 AP_HAL: Split the AP_HAL_Boards.h header into per board sub headers for legibility 2016-09-29 08:26:50 -03:00
Tom Pittenger 3adf8c3e51 AC_AttitudeControl: comment odd math in get_att_target_euler_cd
degree(100) = 1 float multiplicaiton
vector3f * degree(100.0f)  = 4 float multiplications
degree(vector3f) * 100.0f  = 6 float multiplications and needs new degree(vector3f) function
degree(vector3f * 100.0f)  = 6 float multiplications and needs new degree(vector3f) function

These all come to the same conclusion but the one that is faster appears to be a bug but is mathematically correct.
2016-09-27 17:04:53 -07:00
floaledm 602b81a4d7 AP_Frsky_Telem: add ekf_status check 2016-09-27 09:20:32 -07:00
floaledm 27e977289a AP_AHRS: add the get_variances method found in AP_AHRS_NavEKF to AP_AHRS 2016-09-27 09:20:32 -07:00
Peter Barker a10cde35f5 DataFlash: stop logging before filling SD card on PX4
Filling the SD card causes NuttX to have conniptions, including
data loss and failure to boot
2016-09-26 14:02:58 -07:00
Jonathan Challinger 25bee93fcc DataFlash: fix EKF5 message 2016-09-26 13:42:00 -07:00
Tom Pittenger 99d48d8bbd AP_FrSky_Telem: cleanup, non-functional change 2016-09-26 13:12:42 -07:00
floaledm fcfaa98bb6 AP_Frsky_Telem: reworked _statustext_queue.empty() check 2016-09-26 13:07:18 -07:00
Tom Pittenger 8001cc403b AP_Frsky_Telem: fix is_flying assignment 2016-09-26 13:00:33 -07:00
floaledm 5e022bf631 AP_Frsky_Telem: fix *_ap.value issue for Plane
set_is_flying does operations on a nullptr, plus we loose the ability to
update ap_status accordingly for Plane
2016-09-26 12:35:47 -05:00
Francisco Ferreira 42cd8e9721 AP_NavEKF2: Handle yaw jumps due to core switches
Based on work from Paul Riseborough (priseborough)
2016-09-25 18:24:11 -07:00
Francisco Ferreira 8da22e441b Revert 3 commits about yaw reset core switch
Revert "AP_NavEKF2: Fix bug in published yaw reset value found during code review"
commit 175faf1e41.

Revert "AP_NavEKF2: use a struct for all yaw step class variables"
commit 77fad065d1.

Partially revert "AP_NavEKF2: Handle yaw jumps due to core switches"
commit 885bfd1b4e.
2016-09-25 18:24:11 -07:00
floaledm ff0d0b1aa5 AP_Frsky_Telem: use ringbuffer for Frsky message queueing 2016-09-25 18:11:45 -07:00
murata d58c193c90 AP_RangeFinder: To define the OK status to LEDDARONE status. 2016-09-25 17:46:22 -07:00
Tom Pittenger b3d5375aa0 AP_Frsky_Telem: simplify init by assuming everything is nullptr
- also always queue the firmware message regardless of protocol type
2016-09-25 10:42:02 -07:00
Tom Pittenger 6991ca53b3 AP_Frsky_Telem: allow default arguments in init() to set things to nullptr 2016-09-25 10:42:02 -07:00
floaledm 94aa6c4cfb AP_Frsky_Telem: consolidate into a single frsky.init() 2016-09-25 10:42:02 -07:00
Michael du Breuil 9c4b3ec1e1 AP_GPS: Fix incorrect incrementing of last_baud rate
This is a revert of 7c3b8dceb which tried to start at index 0 of the
array of baudrates, however because of the way last_baud is used
this lead to a GPS always being reported as being 1 index off which
lead to users getting reports of baud rates that their GPS wasn't
configured for

Also renames last_baud to be current_baud as that is how it's
actuallly used and should reduce future confusion

And fixed some tabs/vs space issues around where the last_baud rate
was incremented.
2016-09-25 08:50:47 -07:00
Andrew Tridgell 36ea946cf5 AP_Compass: use board defined compass ofs max in calibrator 2016-09-23 10:53:00 +10:00
Andrew Tridgell e7656fb7ac AP_HAL: raise compass offset max again for Disco
values of 1600 happen on Z axis
2016-09-23 10:52:55 +10:00
Jonathan Challinger 17fb7dc88f AP_Compass: initialize offset before beginning sphere fit 2016-09-23 10:52:51 +10:00
Jonathan Challinger 419f1bc00e AP_Compass: change fixed point format for more range 2016-09-23 10:52:46 +10:00
Jonathan Challinger 0652d71a72 AP_Compass: correct wrapping behavior in conversion to fixed point 2016-09-23 10:52:44 +10:00
murata 3a1cd20f11 AP_RangeFinder: To move to the place that use the variable definition for the first time. 2016-09-22 08:41:21 +09:00
Tom Pittenger 8eb7a062c7 AP_Frsky_Telem: tiny text change in statusText 2016-09-21 16:11:04 -07:00
floaledm 9e0cfc81ea AP_Frsky_Telem: updated sensor_status messages according to what is found in Mission Planner
added "NO RC Receiver" and "Bad Logging"
2016-09-21 15:51:04 -07:00
floaledm 5125846ac0 AP_Frsky_Telem: Plane support 2016-09-21 12:12:37 -07:00
floaledm b2b6c88edf AP_Frsky_Telem: renamed vars and funcs for consistency/clarity 2016-09-21 11:32:21 -07:00
Andrew Tridgell 3eb8b5e99f HAL_Linux: added RCInput_Multi
this allows for multiple RCInput methods on one board. On Disco it
combines RCInput_115200 with RCInput_SBUS
2016-09-21 10:33:15 -03:00
Andrew Tridgell 5909552f67 HAL_Linux: added RCInput_115200
this is a RCInput module for multiple R/C uart protocols running at
115200 baud 8-bit. We can decode multiple protocols in parallel with
this module, relying on frame timing and CRCs to get the right
protocol
2016-09-21 10:33:15 -03:00