Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-04 06:58:27 -04:00
Code Issues Packages Projects Releases Wiki Activity
13,179 Commits 71 Branches 510 Tags 754 MiB
f6fada2d49
Commit Graph

3329 Commits

Author SHA1 Message Date
bugobliterator
2fd165d023 Copter: Add esc_calib to as an app in cli 
Usage Notes:
- when in cli mode select setup
- inside setup use esc_calib <chan_mask> to launch esc calibration
  e.g. esc_calib 1010 : enable calibration for Motor 2 and Motor 4
 2014-07-14 09:44:36 +10:00
Andrew Tridgell
49954a3a61 Copter: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell
fa4abdb0ae Copter: added support for MPU9250 2014-07-14 09:44:34 +10:00
Robert Lefebvre
022425584b TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM. 2014-07-13 17:11:30 +09:00
Robert Lefebvre
4b9aea2c55 Parameters: Update Tune Comments with new options 2014-07-13 17:11:27 +09:00
Robert Lefebvre
aff98e34e5 TradHeli: Force recalc scalers after setting main loop time in MotorsHeli so that ramp scalers are right for 32-bit. 2014-07-13 17:11:25 +09:00
lthall
f53181ec66 Copter: Acro balance fix 2014-07-13 15:51:49 +09:00
Andrew Tridgell
71d2333ea8 Copter: changes for more common mavlink code 2014-07-13 15:37:50 +10:00
Andrew Tridgell
28f251005b Copter: fixed typos in parameter markup 2014-07-12 11:26:15 +10:00
Randy Mackay
7f9cd20377 Copter: set UARTs non-blocking at end of initialisation 
Previously we were setting to non-block after arming but this reduce the
chance of bumping into a NuttX USB driver issue that can cause the uart
to become unresponsive and also makes Copter consistent with Plane
 2014-07-11 15:27:29 +09:00
Randy Mackay
34bc136a6c Copter: AC3.2-rc3 version and release notes 2014-07-11 14:18:48 +09:00
Randy Mackay
65e5367619 Copter: rename hybrid to poshold 2014-07-11 14:09:01 +09:00
Randy Mackay
0fc73a0a21 Copter: rename control_hybrid to poshold 2014-07-11 14:06:53 +09:00
Randy Mackay
b565d43d5d Copter: PREFLIGHT_SET_SENSOR_OFFSETS used to set compass offsets 
remove deprecated ardupilot specific SET_MAG_OFFSETS
 2014-07-10 20:25:18 +09:00
Randy Mackay
2c085c300d Copter: only save compass offsets when learning is on 2014-07-10 20:25:16 +09:00
Randy Mackay
b799020e25 Copter: pre-arm check uses compass configured method 2014-07-10 20:24:53 +09:00
svefro
e892b4cd04 Copter: Ch7/8 option to retract mount 
-Define AUX_SWITCH_RETRACT_MOUNT in defines.h
-Added 27=Retract Mount to Parameters.pde CH7 and CH8
-added int on CH7/8opt AUX_SWITCH_RETRACT_MOUNT
-Added Case #if Mount == ENABLE to set mount mode
made set_mode public in AP_Mount.h lib
 2014-07-10 13:03:28 +09:00
Randy Mackay
e1a6b07e60 Copter: setting ESC param to 2 skips high throttle check 
This allows the all-at-once ESC calibration to be performed on a setup
in which the RC input takes some time to come online.
 2014-07-09 13:25:08 +09:00
Robert Lefebvre
4b5167e529 TradHeli: Change behavior of Acro and Stabilize modes when disarmed. Servos should move realistically for testing when disarmed. 2014-07-08 20:18:32 +09:00
Robert Lefebvre
5b13b2b3da TradHeli: Stabilize mode should use get_pilot_desired_collective, not get_pilot_desired_throttle. 2014-07-08 20:18:29 +09:00
Robert Lefebvre
032f321348 TradHeli: Acro mode uses full collective range. 2014-07-08 20:18:27 +09:00
Robert Lefebvre
c7ccd22d96 TradHeli: Set main loop rate time in motors class. 2014-07-08 20:18:24 +09:00
Robert Lefebvre
7ef4c11c92 TradHeli: Initialize Rate FF filters. 2014-07-08 20:18:16 +09:00
Robert Lefebvre
8eb557d1e0 TradHeli: Add Heli.h file 2014-07-08 20:18:10 +09:00
Robert Lefebvre
1f422c86c1 Arducopter: Add independent rate roll and pitch P, I, D tuning options. Add rate feedforward tuning options for tradheli. 2014-07-08 20:18:08 +09:00
Robert Lefebvre
08e135151a TradHeli: Add Mode Filter on RC8 input for RSC Controller. 2014-07-08 20:18:00 +09:00
Robert Lefebvre
ff71b0fa35 TradHeli: Create new function to move data between AP_MotorsHeli and AP_AttitudeControl. 2014-07-08 20:17:57 +09:00
Robert Lefebvre
1aa3961151 Arducopter: Improve comments for scheduler. Add timing table for AVR processors. 2014-07-08 20:17:54 +09:00
Jonathan Challinger
c07ded9a79 Copter: Don't use land detector to stop stabilizing in stabilize 2014-07-08 19:41:41 +09:00
Andrew Tridgell
6416a4d0e6 Copter: fixed apm1-hil build 2014-07-08 15:41:39 +10:00
Andrew Tridgell
a4b9b989b7 Copter: convert to new AP_RangeFinder API 2014-07-08 15:08:18 +10:00
Andrew Tridgell
9f5eb3b464 Copter: remove log CLI code when CLI disabled 2014-07-08 14:28:19 +10:00
Jonathan Challinger
09a01a4668 Copter: Wait 4 seconds before beginning to land during failsafes 2014-07-06 20:25:04 +09:00
Jonathan Challinger
cd08ec5a5f Copter: allow auto-disarm in autotune mode 2014-07-06 19:27:27 +09:00
Jonathan Challinger
ff1f54b390 Copter: allow disarm in autotune mode 2014-07-06 19:27:23 +09:00
Jonathan Challinger
5b36e65cb9 Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents 2014-07-06 19:20:25 +09:00
Randy Mackay
2dfef17caf Copter: guided reset yaw only when initialised 2014-07-06 17:02:13 +09:00
Randy Mackay
81355d1adf Copter: DO_SET_ROI accepted outside missions 
Moved ROI logic to new set_auto_yaw_roi function.
 2014-07-06 17:02:06 +09:00
MousS
ae8fb3f1c5 Copter: MAV_CMD_CONDITION_YAW accepted outside missions 2014-07-06 17:01:15 +09:00
Randy Mackay
46badc05bc Copter: guided mode sets desired velocity instead of target velocity 2014-07-06 17:01:12 +09:00
Randy Mackay
f5640dadbf Copter: guided mode velocity controller 2014-07-06 17:01:08 +09:00
Randy Mackay
b027c71491 Copter: restore pv_get_horizontal_distance_cm function 2014-07-06 17:01:05 +09:00
Randy Mackay
12720bbbe1 Copter: accept condition-yaw commands in guided 2014-07-06 17:00:46 +09:00
Randy Mackay
279926e386 Copter: accept guided pos updates when doing NAV_GUIDED cmd 2014-07-06 17:00:35 +09:00
Randy Mackay
fdc0ec837b Copter: add nav_guided suport to Auto mode 2014-07-06 17:00:31 +09:00
Randy Mackay
af4490a3d5 Copter: remove mode from guided_set_dest 
This duplicate check stopped us from reusing guided
guided_set_destination as part of Auto's nav_guided command
 2014-07-06 17:00:29 +09:00
Andrew Tridgell
21b0b3bc15 Copter: log up to 3 mags 2014-07-04 12:07:59 +10:00
Niels Joubert
10b4757706 ArduCopter: Move MAVLink size check into library 2014-06-30 10:30:17 +10:00
Niels Joubert
4abbda616f ArduCopter: GPS Callback for calculating base position 2014-06-30 10:29:56 +10:00
Andrew Tridgell
edafe7100b Copter: update for AP_Mount change 2014-06-18 12:04:48 +10:00
Randy Mackay
e0f4a570c6 Copter: loiter turns radius from command's p1 field 2014-06-17 20:53:56 +10:00
Randy Mackay
01da4e29fb Copter: use relative_alt flag when decoding change_alt command 2014-06-17 20:53:41 +10:00
Randy Mackay
50e024fe8f Copter: flag current alt as relative 
This is required so common Log_Write_Camera can calculate relative and
abs altitudes provided by either copter or plane

pair programmed with Craig Elder
 2014-06-17 14:11:42 +10:00
Randy Mackay
8c488ebd87 Copter: use common Log_Write_Camera 
pair programmed with Craig Elder
 2014-06-17 14:11:39 +10:00
Randy Mackay
8c48b65175 Copter: bug fix to remove home variable 
pair programmed with Craig Elder
 2014-06-11 12:01:48 +09:00
Randy Mackay
d0194b7a9d Copter: remove home variable 
home has moved to ahrs
saves 15 bytes of RAM
 2014-06-11 11:05:15 +09:00
Randy Mackay
5c305989b9 Copter: set home alt to absolute alt 2014-06-11 11:04:52 +09:00
Randy Mackay
09fc777ab9 Copter: slow motors after landing in AUTO 
This resolves an issue in which the vehicle could tip over if the pilot
did not reduce the throttle to zero soon after landing in AUTO mode
 2014-06-10 22:56:53 +09:00
Jason Short
a873942f73 Fix to restore Gimbal control after Mission with ROI 2014-06-10 20:03:05 +09:00
Randy Mackay
810c87969c Copter: Ch7/8 switch to enable/disable feed forward and accel limiting 2014-06-10 20:03:04 +09:00
Randy Mackay
91b1d20b70 Heli: integrate AttControl's set_yaw_target_to_current_heading 2014-06-10 20:02:52 +09:00
Randy Mackay
08801eebf2 Copter: integrate AttControl's set_yaw_target_to_current_heading 2014-06-10 20:02:51 +09:00
lthall
babe655b8f Copter: Remove acro acceleration slew todo 
It has already been done :)
 2014-06-10 20:02:37 +09:00
Randy Mackay
4221833028 Copter: flip records starting attitude 
Previously flip relied on the attitude controller not updating the earth
frame target during the flip which can't be guaranteed.  Safer for flip
to maintain it's own copy of the original attitude .
 2014-06-10 20:02:32 +09:00
Randy Mackay
75c328a752 TradHeli: integrate init_targets rename to relax_bf_rate_controller 2014-06-10 20:02:30 +09:00
Randy Mackay
77d5d682c1 Copter: integrate init_targets rename to relax_bf_rate_controller 
Also remove unnecessary init_targets from flight mode init functions.
 2014-06-10 20:02:29 +09:00
Randy Mackay
083f2898a9 Copter: use fast_atan2 for bearings to home and next WP 2014-06-06 18:51:06 +09:00
Randy Mackay
f5f206b055 Copter: set inav alt to zero when arming 2014-06-06 18:42:45 +09:00
Ju1ien
abd1370b2c Copter: flag stays landed unless pilot raises throttle 2014-06-06 18:42:30 +09:00
Valentin Brossard
9fcfea5404 Copter: accept DO_CHANGE_SPEED outside of missions 
https://github.com/diydrones/ardupilot/issues/1095
 2014-06-06 16:13:22 +09:00
Ju1ien
fd9502d3fa Copter: Improve surface tracking dynamics 
This little fix will allow much higher sonar_gain without the
oscillating effect it used to bring.
 2014-06-06 15:32:49 +09:00
Randy Mackay
db000f2287 Copter: remove setting rate and thr D term filters 2014-05-29 17:40:24 +09:00
Robert Lefebvre
5eb206e6bb Copter: Add 'handle' to allow #define updating of AC_PID filter rate for Throttle Accel. 2014-05-29 17:39:16 +09:00
Robert Lefebvre
df1de4260d Copter: Set Rate PID D-term filter rates on initialization. 2014-05-29 17:39:12 +09:00
Robert Lefebvre
5ee87f7561 Copter: Change TradHeli to use new AC_HELI_PID class. 2014-05-29 17:39:04 +09:00
Randy Mackay
6496872885 Copter: release notes for AC3.1.5 2014-05-28 11:23:58 +09:00
Andrew Tridgell
1dbbdde8ef Copter: use new GCS_Common.cpp functions 2014-05-28 09:35:57 +10:00
Randy Mackay
0b5ff80b3e Copter: remove unused pos vector functions 
removed pv_latlon_to_vector, pv_get_lat, pv_get_lon.
it would probably be best if these were moved into the Math library
 2014-05-27 16:30:32 +09:00
Randy Mackay
d4a892c650 Copter: AC3.2-rc2 release notes and version 2014-05-27 14:44:15 +09:00
Randy Mackay
20719e23fd Copter: enable PARACHUTE and RALLY for all but APM 2014-05-27 14:43:33 +09:00
Randy Mackay
af10a6817c Copter: remove command_description.txt 
Description in this file were out of date or incomplete and it is better
for people to refer to the MAVLink documentation or the
/libraries/GCS_MAVLink/message_definitions/common.xml and
ardupilotmega.xml files
 2014-05-27 10:58:42 +09:00
Andrew Tridgell
a55c511f63 Copter: updates for new GCS_MAVLink API 2014-05-21 12:45:25 +10:00
Andrew Tridgell
cdcaad3079 Copter: update baud rate parameter descriptions 2014-05-21 12:45:25 +10:00
Andrew Tridgell
cc6fba4cad Copter: change baudrates parameters to 16 bit 2014-05-21 12:45:25 +10:00
Randy Mackay
d5a0ca4f3c Copter: integrate init_loiter_target name change 2014-05-19 12:27:29 +09:00
Randy Mackay
63135a044f Copter: remove setting Z-axis target in Hybrid 
This workaround is no longer required because AC_WPNav's
set_loiter_target call no longer sets the position controller's z-axis
target
 2014-05-19 12:27:23 +09:00
Arthur Benemann
e1b7e53c04 Copter: only acceept Guided waypoints in Guided mode 
Fix #1068. When receiving guided waypoints do not change to GUIDED mode. This serves as a safety precaution for GCS, since they must switch to guided mode before sending the waypoints.
 2014-05-17 12:02:53 +09:00
Randy Mackay
481a55867e Copter: only send sonar distance to GCS when sonar enabled 2014-05-16 14:46:56 +09:00
Ben Nizette
8c7b4feac1 Copter: send sonar distance to GCS via MAVLink 
At the moment, the copter sonar set up does not have access to the
raw sonar readings so this code sets the voltage field to zero.
 2014-05-16 14:46:11 +09:00
Andrew Tridgell
836b365bc8 Copter: use setup_uart() 2014-05-16 11:45:11 +10:00
Andrew Tridgell
427a638296 Copter: added reporting of AHRS health 2014-05-15 21:14:21 +10:00
Randy Mackay
9f81e286d1 Copter: add Pixhawk pin to RSSI_PIN's @Value 
Also prepend APM2 to existing definitions
 2014-05-15 17:13:43 +09:00
Randy Mackay
f7a9ee24ef Copter: minor comment update 2014-05-15 16:21:35 +09:00
Randy Mackay
715e9c0474 Copter: reset mission when disarming 2014-05-15 16:21:32 +09:00
Randy Mackay
7d4c74c28e Copter: when leaving AUTO only stop mission if running 
This resolves an issue in which the mission would not automatically
start from the beginning if it had previously been run to completion
 2014-05-15 16:21:30 +09:00
Randy Mackay
a38e00c048 Copter: remove unused HIGH, LOW definitions 
Minor commit to kick off the auto build so AC3.2-rc1 will go out
 2014-05-09 16:35:21 +09:00
Randy Mackay
3f329d0857 Copter: version to AC3.2-rc1 2014-05-09 13:48:47 +09:00
Randy Mackay
e75d6a2da6 Copter: remove meaningless check from motor_test 2014-05-09 13:48:44 +09:00
Randy Mackay
0c7a3f1ec5 Copter: remove unused Log_Write_GPS function 2014-05-09 13:48:41 +09:00
Randy Mackay
b4dcad725c Copter: remove unused servo_write function 2014-05-09 13:48:38 +09:00
Randy Mackay
1e8b99ad17 Copter: update release notes for AC3.2-rc1 2014-05-09 13:48:35 +09:00
Andrew Chapman
3f0a52cb53 Copter: ch7/8 switch for auto pause/continue 
- added new mode for CH7/CH8 (#24, auto mission reset)
- changed mission.start() to mission.start_or_resume() in auto_init()
 2014-05-08 23:09:42 +09:00
Andrew Chapman
8640e11728 Copter: bug fix rally point landing target 
was drifting toward home by some distance as (0,0,0) was hard-coded in
control_rtl.pde. Fixed, tested in SITL
 2014-05-08 23:09:40 +09:00
Randy Mackay
197d83e32a Copter: bug fix to sport roll pitch control 2014-05-08 16:16:02 +09:00
Randy Mackay
0af9d502d9 Copter: set pos controller speeds before circle init 
This ensures stopping point is calculated correctly
 2014-05-08 16:15:59 +09:00
Randy Mackay
3cc5b9446f Copter: AUTO and Guided call wp_and_spline_init 2014-05-08 16:15:55 +09:00
Randy Mackay
11918869a5 Copter: RTL calls wp_and_spline_init 2014-05-08 16:15:52 +09:00
Randy Mackay
ff1a58e078 Copter: increase LOITER_RATE_IMAX to 1000 
This allows us to load up the I term with the vehicle's current
acceleration during mode transitions

pair programmed with Randy
 2014-05-08 16:15:34 +09:00
Randy Mackay
fb2be07b44 Copter: update AC_WPNav instantiation 2014-05-08 16:15:29 +09:00
Randy Mackay
10d7ab5840 Copter: update release notes for AC3.1.4 2014-05-08 11:58:37 +09:00
Randy Mackay
afb9c0a5c7 Copter: update release notes for AC3.1.4-rc1 2014-05-02 14:23:13 +09:00
Randy Mackay
0ad3c1e15e Copter: add EKF to Ch7/Ch8 Opt parameter description 2014-05-02 10:02:23 +09:00
Randy Mackay
d857427444 Copter: disable RALLY points by default 
This saves 2k of flash which allows the code to fix on the APM1/2
 2014-04-30 21:46:21 +09:00
Randy Mackay
a3036fc443 Copter: init pos_control z-axis after setting speed and accel 2014-04-30 21:46:17 +09:00
Randy Mackay
a4c675c23e Copter: add PILOT_ACCEL_Z parameter 
Allows configurable z-axis acceleration when pilot is controlling
altitude
 2014-04-30 21:46:13 +09:00
Randy Mackay
7d7a2aced7 Copter: init vert speed and accel for each flight mode 
This resolves issue #1021 in which LAND mode could descend at the
PILOT_VELZ rate instead of the WPNAV_SPEED_DN

Pilot defined acceleration is used for AltHold, AutoTune , Circle,
Hybrid, Loiter, OF_Loiter and Sport flight modes
Waypoint Nav (ie. AutoPilot) acceleration is used for Auto, Land, RTL
 2014-04-30 21:46:10 +09:00
Randy Mackay
466e9db1f9 Copter: integrate AC_WPNav get_speed_xy name change 2014-04-30 21:46:07 +09:00
Randy Mackay
5b3438850d Copter: fix typo in Log_Write_Baro 
Log_Write_Baro should be an empty function when logging is disabled
Fix contributed by Jason Short
 2014-04-30 08:50:51 +09:00
Craig Elder
241557e5e0 Copter: Corrected typo in RC_FEEL_RP parameter description 2014-04-28 23:56:49 -07:00
Randy Mackay
416e9457ce Copter: remove cli motor test 2014-04-29 11:41:17 +09:00
Randy Mackay
ae9477600c Copter: add mavlink motor_test 
Based on original work by Nils Hogberg
 2014-04-29 11:31:45 +09:00
Craig Elder
00033bd302 Copter: Update RC_FEEL_RP Description 2014-04-28 17:44:09 -07:00
Randy Mackay
b9b3a39a83 Copter: fence enable/disable via MAVLink 2014-04-27 16:18:17 +09:00
Randy Mackay
d3411e45bb Copter: use get_current_nav_index() 2014-04-27 16:00:44 +09:00
Randy Mackay
5fe86a657e Copter: land_do_not_use_GPS has no return value 2014-04-27 15:41:41 +09:00
Randy Mackay
0665cf6b28 Copter: RTL alt should not be above fence alt 
Resolves issue #435
If the altitude fence is enabled, when the vehicle RTLs it will return
at the lower of the RTL_ALT and the FENCE_ALT_MAX
 2014-04-27 15:41:37 +09:00
Randy Mackay
4686eef266 Copter: GPS failsafe ensures LAND is pilot-controlled 
This resolves issue #880 in which if a GPS failsafe occurred while the
vehicle was already in LAND mode, the LAND would continue to be GPS
controlled LAND instead of pilot-controlled LAND
 2014-04-27 15:11:47 +09:00
Randy Mackay
dba8fac515 Copter: remove unused variables from fence.pde 
saves 2 bytes
 2014-04-27 11:11:12 +09:00
Randy Mackay
1aeaa5955b Copter: integrate 10sec manual recovery after fence breach 2014-04-27 11:11:09 +09:00
Randy Mackay
20de5b3006 Copter: Loiter clears out pilot acceleration when failsafe occurs 
This ensures invalid pilot desired accelerations are cleared from the
loiter controller.  This is probably not strictly necessary because the
vehicle should switch out of Loiter and into RTL during failsafe.
 2014-04-25 14:45:19 +09:00
Randy Mackay
05d9dc5cba Copter: RTL always land if in radio failsafe 
Resolves issue in which vehicle would get stuck at RTL_ALT_FINAL if
failsafe occured.
Also clear out pilot acceleration from loiter controller if failsafe
occurs during the final descent.
 2014-04-25 14:45:16 +09:00
Randy Mackay
40650aeb68 Copter: roll and pitch nudging in RTL descent 2014-04-25 14:17:03 +09:00
Michael Oborne
68f439acbe Fix auto doc group names 2014-04-25 07:53:03 +08:00
Randy Mackay
19f1e7fec4 Copter: disable Parachute by default 
This saves 1k of flash and we are desperately low on the APM1/APM2.
Hopefully we can find savings somewhere and re-enable it by default.
 2014-04-24 19:02:32 +09:00
Randy Mackay
ea64438ef9 Copter: RTL ensures heading is back to initial heading 
This fixes the issue in which a short RTL_LOIT_TIME could cause the
vehicle's heading to be caught between it's heading when it arrived at
home and the initial armed heading.  With this fix it now waits above
home until the timer has run out AND the heading is within 2degrees of
the initial armed heading.
 2014-04-24 18:54:49 +09:00
Randy Mackay
e23115516d Copter: disarm after completing RTL 
Note that an RTL command executed in AUTO mode will also disarm when it
lands and pilot's throttle is put to zero and no further commands will
be executed.  This is normally not an issue because missions generally
end with an RTL (instead of having the RTL in the middle) and a work
around is available in that the LAND command could be used instead of
RTL.
 2014-04-24 17:27:30 +09:00
Randy Mackay
a5602c5f14 Copter: updated contributors list 
Add JulianD and SandroT and replaced tabs with spaces
 2014-04-24 11:28:41 +09:00
Ju1ien
78a3e0f5a2 Copter: Hybrid removed Wind_comp_estimate filter 
Removed useless call of function
hybrid_get_wind_comp_lean_angles(hybrid.wind_comp_roll,
hybrid.wind_comp_pitch);
Removed 10Hz filter for hybrid_update_wind_comp_estimate()
 2014-04-24 11:28:37 +09:00
Randy Mackay
287af8f66e Copter: disable optical flow by default 
We have run out of flash on the APM2, it was a choice between Hybrid
flight mode and OF_Loiter
 2014-04-23 15:27:08 +09:00
Randy Mackay
55e7e1eb3e Copter: allow HYBRID to be disabled to save flash 
Hybrid flight mode costs 4.5k of flash which currently puts us over the
limit for APM1 and APM2 unless optical flow or other features are
disabled
 2014-04-23 15:27:05 +09:00
Randy Mackay
ba94fc9796 Copter: Hybrid move reset_I into structure 
Saves 1 byte of RAM
 2014-04-23 15:00:09 +09:00
Ju1ien
ff532a06ec Copter: Hybrid fixes to wind_comp, brake pitch timer, thr peaks 
There was an error in the velocity axis used to update
brake_timeout_pitch (vel_right instead of vel_fw)

The wind_comp was not enough filtered for the Pixhawk (400Hz), so I
added a specific time constant (TC_WIND_COMP) to have the expected
filter with 400Hz controllers.

About throttle peaks, after some tests and from logs, they happen when
hybrid switches to loiter.
There is always a difference between Alt and DesiredAlt (DAlt), but,
when loiter engages, it initializes DAlt = Alt and the copter tries
immediatelly to reach that new setpoint. So the solution would be to
init_loiter_target() just as it was in pre-onion code : only x/y and not
z. and to be able to pass parameters like that
wp_nav.init_loiter_target(inertial_nav.get_position(), Vector3f(0,0,0));

Well, from this new code structure, it seems not possible with current
functions so I've used set_loiter_target that init position passed as
parameter and velocity to 0 (as expected).
BTW, I think there was something wrong with set_loiter_target function,
the "Vector3f& position" parameter was not used at all...
I moved the reset flag from init_loiter_target to set_loiter_target.
 2014-04-23 15:00:04 +09:00
Ju1ien
14cbb09804 Copter: hybrid add Brake or Loiter to Pilot override transition 
Corrected a little mistake in get_wind_comp...()
Mixed transition not only from loiter but as well from brake to manual
override
 2014-04-23 15:00:01 +09:00
Ju1ien
43b1dd748b Copter: hybrid init brake roll and pitch at loiter exit 2014-04-23 14:59:59 +09:00
Ju1ien
d745060c80 Copter: fix Hybrid flight mode in Parameter description 2014-04-23 14:59:56 +09:00
Ju1ien
f8e8d4024d Copter: Hybrid's max brake angle to 30deg 2014-04-23 14:59:53 +09:00
Ju1ien
b3e8112d24 Copter: Hybrid fix wind_comp time constant 
Corrected timer init values and wind_comp time constant to get the best
behaviour

Check if wider deadband required (current is 30).
We were using a comparison to a 70-100 cdeg deadband in our initial
code. The deadband was there to avoid unwanted switches in case of
inaccurate fingers/radio

Adjusted timers to 100/400Hz

I_term does not init when in hybrid loiter
 2014-04-23 14:59:43 +09:00
Randy Mackay
4778c73de2 Copter: Hybrid 10hz updates to wind comp lean angles 2014-04-23 14:59:40 +09:00
Randy Mackay
f87ab21063 Copter: Hybrid estimates wind when speed under 10cm/s 2014-04-23 14:59:38 +09:00
Randy Mackay
d36f137bf8 Copter: allow arming, disarming in Hybrid mode 2014-04-23 14:59:35 +09:00