Commit Graph

995 Commits

Author SHA1 Message Date
Peter Barker 964b683b83 GCS_MAVLink: add missing includes 2024-01-11 15:29:54 +11:00
Peter Barker 78087da03c GCS_MAVLink: correct compilation when AP_MISSION_ENABLED is false 2024-01-03 16:16:47 +11:00
Peter Barker 4dae077787 GCS_MAVLink: return MAV_RESULT_COMMAND_INT_ONLY if command-long support not compiled in 2024-01-02 18:58:07 +11:00
Peter Barker 6515df72f0 GCS_MAVLink: correct compilation when AP_Vehicle disabled 2023-12-13 18:34:40 +11:00
Peter Barker 70cc84dd89 GCS_Common: correct compilation when AP_RSSI_ENABLED is false 2023-12-13 18:30:32 +11:00
Peter Barker 71a64d5046 GCS_MAVLink: correct compilation when compass not enabled 2023-12-13 14:34:13 +11:00
Bob Long 467e62b967 GCS_Common: allow fallback vert rate in VFR_HUD 2023-12-05 10:44:37 +11:00
Peter Mullen adc0ebf9de AP_RangeFinder: Add signal_quality_pct to range finder state 2023-11-21 22:24:12 +11:00
Peter Barker bc03918ea4 GCS_MAVLink: create and use AP_MAVLINK_MSG_UAVIONIX_ADSB_OUT_STATUS_ENABLED
narrower define we can use when not compiling in the backends which use this
2023-11-21 13:21:13 +11:00
Peter Barker 6d172a1b22 GCS_MAVLink: exclude deadlock-creation based on FAILURE_CREATION_ENABLED 2023-11-21 09:35:50 +09:00
Peter Barker 170d96e8cc GCS_Common: remove mappings for non-supported messages 2023-11-20 19:25:25 +11:00
Peter Barker 70160c58e8 GCS_MAVLink: tidy sending of ADSB messages 2023-11-20 19:25:25 +11:00
Peter Barker 6f5ff2f952 GCS_MAVLink: tidy sending of HIGH_LATENCY2 messages 2023-11-20 19:25:25 +11:00
Peter Barker 031e5b1dab GCS_MAVLink: tidy sending of WATER_DEPTH messages 2023-11-20 19:25:25 +11:00
Peter Barker a8906ac491 GCS_MAVLink: tidy sending of winch messages 2023-11-20 19:25:25 +11:00
Peter Barker 564e6ec77a GCS_MAVLink: tidy sending of efi messages 2023-11-20 19:25:25 +11:00
Peter Barker 892bafe951 GCS_MAVLink: tidy sending of esc telem generator messages 2023-11-20 19:25:25 +11:00
Peter Barker a95b2b2497 GCS_MAVLink: tidy sending of queued generator messages 2023-11-20 19:25:25 +11:00
Peter Barker d894281f2b GCS_MAVLink: tidy sending of queued SIM messages 2023-11-20 19:25:25 +11:00
Peter Barker ec69867102 GCS_MAVLink: tidy sending of queued mcu status messages 2023-11-20 19:25:25 +11:00
Peter Barker 0983bd2d06 GCS_MAVLink: tidy sending of queued opticalflow messages 2023-11-20 19:25:25 +11:00
Peter Barker c017c8acf4 GCS_MAVLink: tidy sending of queued mount messages 2023-11-20 19:25:25 +11:00
Peter Barker 24f00ddaf7 GCS_MAVLink: add and use AP_MAVLINK_COMMAND_LONG_ENABLED 2023-11-16 10:50:21 +11:00
Peter Barker 9ff9f8d216 GCS_MAVLink: remove no-longer-required location_from_command_t(command_long) 2023-11-16 10:50:21 +11:00
Peter Barker 485fa80f1c GCS_MAVLink: collapse un-needed method 2023-11-16 10:50:21 +11:00
Peter Barker e0eacdc197 ArduPlane: handle DO_SET_MISSION_CURRENT as both long and int 2023-11-16 10:50:21 +11:00
Peter Barker d7160aea2d GCS_MAVLink: handle DO_SET_MISSION_CURRENT as both long and int 2023-11-16 10:50:21 +11:00
Peter Barker b572fe80ec GCS_MAVLink: handle request autopilot capabilities as both long and int 2023-11-16 10:50:21 +11:00
Nick Exton 59c5092810 GCS_MAVLink: Handle param2 (reset) in DO_SET_MISSION_CURRENT cmd 2023-11-14 10:22:45 +11:00
Nick Exton 0567d8576e GCS_MAVLink: Add explicit handling of DO_JUMP_TAG 2023-11-14 10:22:45 +11:00
Nick Exton 3ba63d33d5 GCS_MAVLink: Add handler for CAMERA_CAPTURE_STATUS request 2023-11-09 13:00:57 +09:00
Peter Barker abf32906d2 GCS_MAVLink: support gripper commands as both long and int 2023-11-08 18:15:25 +11:00
Peter Barker 09ab14c69f GCS_MAVLink: handle battery reset as both long and int 2023-11-08 18:14:27 +11:00
Peter Barker 1d08900cb0 GCS_MAVLink: handle MAV_CMD_DO_SPRAYER as both long and int 2023-11-07 10:55:46 +11:00
Peter Barker 9285188d85 GCS_MAVLink: handle DO_ADSB_OUT_IDENT as both long and int 2023-11-07 10:32:39 +11:00
Asif Khan 8a791d6082 GCS_MAVLink: add SEND_FOV_STATUS support 2023-11-02 15:54:37 +11:00
Peter Barker 187ae07225 GCS_MAVLink: handle camera messages as COMMAND_INT as well as COMMAND_LONG 2023-11-02 15:54:13 +11:00
Peter Barker 9d9b95af15 GCS_MAVLink: correct mavlink result when airspeed not available
only in progress if we have started a task running
2023-11-02 15:52:30 +11:00
Peter Barker e162e74c0c GCS_MAVLink: allow MAV_CMD_RUN_PREARMS as both long and int 2023-11-01 19:30:44 +11:00
Peter Barker 78475cad5c GCS_MAVLink: handle FLASH_BOOTLOADER as command-long and command-int 2023-10-31 11:32:32 +11:00
Peter Barker afd85c8613 GCS_MAVLink: handle MAV_CMD_START_RX_PAIR as both int and long 2023-10-31 11:18:57 +11:00
Nick Exton 57cead9052 GCS_MAVLink: Make handler for DO_SET_ROI_NONE common 2023-10-30 08:28:23 +09:00
Peter Barker b5edc4c757 GCS_MAVLink: correct use of AP_MAVLINK_MSG_RELAY_STATUS_ENABLED define 2023-10-27 14:16:47 +11:00
Peter Barker 2ac9cc94c6 GCS_MAVLink: correct compilation if rangefinder disabled 2023-10-27 14:16:47 +11:00
Peter Barker fbbadecfe3 GCS_MAVLink: tidy use of GPS mavlink defines 2023-10-27 14:16:47 +11:00
Peter Barker 1c7eebec3a GCS_MAVLink: tidy proximity message handling 2023-10-27 14:16:47 +11:00
Peter Barker 306caae6e5 GCS_MAVLink: tidy OSD param message handling 2023-10-27 14:16:47 +11:00
Peter Barker 1f0ae343b1 GCS_MAVLink: tidy ADSB message handling 2023-10-27 14:16:47 +11:00
Peter Barker c1f0c9e70a GCS_MAVLink: tidy CAN message handling 2023-10-27 14:16:47 +11:00
Peter Barker 0f6718b23d GCS_MAVLink: remove FLASH_BOOTLOADER commandd if not compiled in
removes handling of MAV_CMD_FLASH_BOOTLOADER if AP_BOOTLOADER_FLASHING_ENABLED is disabled

Side-effect of correcting the mavlink result code in that case.
2023-10-27 14:16:47 +11:00
Peter Barker d665d2c56e GCS_MAVLink: save bytes when AP_AIS_ENABLED is false 2023-10-27 14:16:47 +11:00
Peter Barker e85f843c5d CS_MAVLink: tidy use of AP_BATTERY_ENABLED defines
remove entire functions rather than just their content
2023-10-26 13:23:57 +11:00
Peter Barker 2412ba495d GCS_MAVLink: remove handling of PREFLIGHT_SET_SENSOR_OFFSETS
This was the old offboard-calibration code.

We've checked MAVProxy, QGC and MissionPlanner and they're not using this code.

The onboard calibration stuff is better.
2023-10-26 13:19:59 +11:00
Peter Barker 740b939aa5 GCS_MAVLink: handle control-high-latency as both long and int 2023-10-26 13:19:29 +11:00
Peter Barker 21eaa08333 GCS_MAVLink: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in 2023-10-24 12:59:19 +11:00
Peter Barker 0b04f765d4 GCS_MAVLink: factor out a virtual mav_frame_for_command_long method 2023-10-24 12:59:19 +11:00
Peter Barker 25846eb2bc GCS_MAVLink: handld MAV_CMD_DO_FENCE_ENABLE as both long and int 2023-10-24 11:37:18 +11:00
Peter Barker 37b02725b3 GCS_MAVLink: handle MAV_CMD_DO_SEND_BANNER as both long and int 2023-10-18 19:49:17 +11:00
Peter Barker e71227fe3a GCS_MAVLink: handle MAV_CMD_GET_HOME_POSITION as both long and int 2023-10-18 19:48:23 +11:00
Peter Barker 7713b531a0 GCS_MAVLink: allow setting modes via COMMAND_INT and DO_SET_MODE 2023-10-17 10:41:36 +11:00
Peter Barker 90d39a6ee0 GCS_MAVLink: add build option for deprecated MISSION_REQUEST
replaced by MISSION_REQUEST_INT
2023-10-17 10:40:12 +11:00
Peter Barker 1ece48b2b3 GCS_MAVLink: handle MAV_CMD_DEBUG_TRAP as both long and int 2023-10-17 10:25:45 +11:00
Peter Barker 659db36efe GCS_MAVLink: accept accel cal vehicle positions as both int and long 2023-10-12 20:39:32 +11:00
Peter Barker bb6287893d GCS_MAVLink: allow for compilation without AP_RTC_ENABLED 2023-10-11 19:17:27 +11:00
Peter Barker ce1bb64686 GCS_MAVLink: handle EKF_SOURCE_SET as both long and int 2023-10-11 18:37:02 +11:00
Willian Galvani 107474b792 GCS_Common: use int8_t for rangefinder quality_pct 2023-10-11 08:29:58 +11:00
Peter Barker 805901dc18 GCS_MAVLink: allow PREFLIGHT_STORAGE as COMMAND_INT and COMMAND_LONG 2023-10-10 08:29:26 +09:00
Peter Barker 77945be031 GCS_MAVLink: cope with NaNs being passed in when doing conversion to command_int 2023-10-05 20:44:12 +11:00
Peter Barker 57c2f7b2de GCS_MAVLink: handle DO_AUX_FUNCTION as both long and int 2023-10-04 19:01:22 +11:00
Peter Barker 33b0bf699e GCS_MAVLink: allow compilation when GPS library not available 2023-10-04 18:10:58 +11:00
Peter Barker 423a88f9cd GCS_MAVLink: handle message interval commands as both long and int 2023-10-03 10:12:21 +09:00
Andrew Tridgell 92c0e7f860 GCS_MAVLink: use mavlink_frame_char_buffer()
and remove unnecessary extra mavlink_get_channel_status() function
2023-10-02 21:45:28 +11:00
Peter Barker ef8cd449ec GCS_MAVLink: handle MAV_CMD_DO_FLIGHTTERMINATION as both long and int 2023-09-27 11:27:45 -07:00
Peter Barker 0f6bf8994f GCS_MAVLink: handle MAV_CMD_AIRFRAME_CONFIGURATION as both LONG and INT 2023-09-26 11:37:42 +10:00
Asif Khan 65be0bd1ba GCS_MAVLink: add MAV_CMD_IMAGE_STOP_CAPTURE support
Co-authored-by: Zachary Zalass <zachzalass@gmail.com>
2023-09-21 21:05:01 +10:00
Peter Barker b44682d1a6 GCS_MAVLink: handle CAN_FORWARD as both command_INT and COMMAND_LONG 2023-09-20 17:50:56 +10:00
Peter Barker 5b0393e280 GCS_MAVLink: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG 2023-09-19 11:16:10 +10:00
Peter Barker 4f0b328674 GCS_MAVLink: support preflight calibration via command_int 2023-09-13 17:24:07 +10:00
Nick Exton d47b60b92a GCS_MAVLink: Fix CAMERA_SETTINGS payload size check 2023-09-08 15:31:33 +09:00
Peter Barker ed5da4ead2 GCS_MAVLink: allow more libraries to compile with no HAL_GCS_ENABLED 2023-09-05 22:23:51 +10:00
Peter Barker 8473f05738 GCS_MAVLink: add defines for serial control, deviceop and servo_relay 2023-09-05 10:20:14 +10:00
Peter Barker fe512f7074 GCS_MAVLink: handle servo/relay events as both command_long and command_int 2023-08-29 11:15:14 +10:00
Peter Barker 92192a7510 GCS_MAVLink: add build options for deprecated messages MOUNT_CONTROL/MOUNT_CONFIGURE
these are repalced by the command equivalents
2023-08-29 11:06:13 +10:00
Asif Khan e3f0904616 GCS_MAVLink: move handling of all do-set-roi to AP_Mount library 2023-08-26 17:55:53 +10:00
Peter Barker a2d5244b10 GCS_MAVLink: accept mount commands as command_int 2023-08-24 22:07:12 +10:00
Nick Exton fad1f35d93 GCS_MAVLink: Remove unreachable return in handle_command_mount() 2023-08-24 11:57:55 +10:00
Tom Pittenger 732cd31f27 GCS_MAVLink: MSG_HOME_POSITION to use NaN for invalid 2023-08-23 08:53:29 -07:00
Peter Barker b141cca3d5 GCS_MAVLink: pass mavlink_message_t to handle_command_*_packet
the "special case" blocks are getting longer and longer.  Merge the switch statements for the command type to be handled by passing around the message.
2023-08-22 10:11:33 +10:00
Peter Barker 1dd5778956 GCS_MAVLink: correct placement of AP_MAVLINK_MISSION_SET_CURRENT_ENABLED 2023-08-22 09:09:54 +10:00
Peter Barker f2066d8e58 GCS_MAVLink: remove ap_message<->mavlinkid mappings for unused ids 2023-08-15 09:14:27 +10:00
Peter Barker 7764d1d904 GCS_MAVLink: add build_options.py option to remove rallypoint protocol 2023-08-15 08:37:17 +10:00
Peter Barker 808fcbda0e GCS_MAVLink: fix airspeed cal / format commands via non-USB telemetry 2023-08-15 08:13:32 +10:00
Andy Piper 9ac683a350 GCS_Common: report ARM CPUID on startup 2023-08-15 06:53:48 +10:00
Andy Piper cf9a3ada28 GCS_MAVLink: print out IOMCU mcuid on startup 2023-08-15 06:53:48 +10:00
olliw42 2f58d082f0 GCS_Common: brackets missing in switch case 2023-08-11 12:11:43 -07:00
davidsastresas 6a9b457be3 GCS_Common: autopilot_state_for_gimbal_device sends angular_velocity_z 2023-08-10 14:37:30 +09:00
Ryan Friedman 578ba20df0 GCS_MAVLink: Use renamed visual odom function
* Now called pose instead of position

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-08-10 13:58:00 +09:00
Peter Barker 6097f1aa61 GCS_MAVLink: allow removal of preflight commands to fail the autopilot 2023-08-10 07:11:22 +10:00
Peter Barker 77b8c96eae GCS_MAVLink: add build_options.py option to remove fencepoint protocol
also gate more code on defines

Saves ~2kB
2023-08-09 17:53:54 +10:00
Peter Barker 13c83ee9f8 GCS_MAVLink: enable sending of RELAY_STATUS message 2023-08-09 07:44:07 +10:00