Commit Graph

529 Commits

Author SHA1 Message Date
Andrew Tridgell 507fcb0f27 Tools: moved make_abin.sh into Tools/scripts
will be used in px4 build
2018-02-08 18:56:51 +11:00
Andrew Tridgell 4ce0c2c827 HAL_ChibiOS: simplify skyviper-v2450 config
remove unused peripherals
2018-02-08 17:36:33 +11:00
Andrew Tridgell b90c0d78f3 HAL_ChibiOS: fixed build warning 2018-02-08 17:36:33 +11:00
Andrew Tridgell 8eff43a352 HAL_ChibiOS: fixed printf arguments 2018-02-08 17:36:33 +11:00
Andrew Tridgell aee6462deb HAL_ChibiOS: enable I2C clearing on F412 board only
may be needed on other boards in the future, but for now we only know
its needed on an I2C 20789, which is rare
2018-02-08 17:36:33 +11:00
Siddharth Purohit 40142e5aef ChibiOS: implement way to clear i2c bus by toggling clock line 2018-02-08 17:36:33 +11:00
Andrew Tridgell 0d089e8116 HAL_ChibiOS: fixed F412 OF reset pin 2018-02-08 17:36:33 +11:00
Andrew Tridgell 3c3389a005 HAL_ChibiOS: raise I2C bus priority on F412
needed for good scheduling with I2C IMU
2018-02-08 17:36:33 +11:00
Andrew Tridgell 20a008c80a HAL_ChibiOS: disable trace buffers
these were unusued but still allocated
2018-02-08 17:36:33 +11:00
Andrew Tridgell 875008f2a6 HAL_ChibiOS: lock all DMA channels on reboot
this fixes a problem with the ICM-20789 on I2C where a reboot while the bus is active
leaves the IMU in a dead state where it can't be recovered without a power cycle.
2018-02-08 17:36:33 +11:00
Andrew Tridgell 6faace278a HAL_ChibiOS: run i2c at 400kHz on F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 9f53ae1ea4 HAL_ChibiOS: added F412-rev1 hwdef.dat 2018-02-08 17:36:33 +11:00
Andrew Tridgell 47ce37f463 HAL_ChibiOS: report I2C clock downgrades 2018-02-08 17:36:33 +11:00
Andrew Tridgell 73418519eb HAL_ChibiOS: enable analog debug on F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell fd824e6258 HAL_ChibiOS: enable toy mode on F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell d208dc69d3 Tools: moved make_abin.sh into ChibiOS scripts 2018-02-08 17:36:33 +11:00
Andrew Tridgell 4aa604a193 HAL_ChibiOS: enable pixartflow on skyviper-V2450 2018-02-08 17:36:33 +11:00
Andrew Tridgell 591e0c2249 HAL_ChibiOS: allow control of interrupt port
F412 has radio IRQ on port B
2018-02-08 17:36:33 +11:00
Andrew Tridgell 3cacb1d4b5 HAL_ChibiOS: commented the motor order in hwdef 2018-02-08 17:36:33 +11:00
Andrew Tridgell f3f6972fc0 HAL_ChibiOS: output panics on system console 2018-02-08 17:36:33 +11:00
Andrew Tridgell 75226ba187 HAL_ChibiOS: enable logging on MindPX-v2
not working yet, seems to be a problem with SDIO interface
2018-02-07 20:33:45 +11:00
Andrew Tridgell 4548fd4d2f HAL_ChibiOS: changed RCIN to PULLDOWN
this fixes a high cpu load with no receiver connected
2018-02-07 20:33:45 +11:00
Andrew Tridgell 86189393a7 HAL_ChibiOS: fixed build warnings 2018-02-07 20:33:45 +11:00
Andrew Tridgell 4886ffbf8a HAL_ChibiOS: fixed build warnings 2018-02-07 20:33:45 +11:00
Andrew Tridgell 30e4323c6d HAL_ChibiOS: disable USART1 till USB problem solved
using USART1 causes USB disconnects. The behaviour is like CTS/RTS is
enabled on USART1, but it is disabled.
2018-02-07 20:33:45 +11:00
Andrew Tridgell d0eb2970c7 HAL_ChibiOS: ensure RTS and CTS are both disabled for no flow control 2018-02-07 20:33:45 +11:00
Andrew Tridgell 82f1f462ae HAL_ChibiOS: ensure we don't init a uart driver twice 2018-02-07 20:33:45 +11:00
Andrew Tridgell ad5a04fc89 HAL_ChibiOS: added NODMA option
this allows a peripheral to be configured without DMA (for low-use
UARTs)
2018-02-07 20:33:45 +11:00
Andrew Tridgell 74f4d5a3c9 HAL_ChibiOS: push MPU6500 to 4MHz on mindpx-v2 2018-02-07 20:33:45 +11:00
Andrew Tridgell f1ce321a2f HAL_ChibiOS: added checking of bus owner
this ensures all bus transfers are only done by the thread that owns
the semaphore
2018-02-07 20:33:45 +11:00
Andrew Tridgell fa68210210 HAL_ChibiOS: fixed build with older compilers 2018-02-07 20:33:45 +11:00
Andrew Tridgell 626632989e HAL_ChibiOS: fixed build for boards with no USB 2018-02-07 20:33:45 +11:00
Andrew Tridgell 41758348e5 HAL_ChibiOS: added checking of lock state in shared_dma
and use lock around check for tx completion in UART handler
2018-02-07 20:33:45 +11:00
Andrew Tridgell dce4c90467 HAL_ChibiOS: moved UART thread to UART driver
use an event model for triggering sends from tx complete DMA handler
for unbuffered uarts
2018-02-07 20:33:45 +11:00
Andrew Tridgell 5fc12f82fb HAL_ChibiOS: expanded interrupt stack to 256
this is very conservative, and may be trimmed later based on analysis
of stack usage
2018-02-07 20:33:45 +11:00
Andrew Tridgell aae1cc22f4 HAL_ChibiOS: updated USB device strings
use defaults or add in serial number
2018-02-07 20:33:45 +11:00
Andrew Tridgell 4b8bde746e HAL_ChibiOS: improved default USB strings
use board name and serial number to make IDs unique
2018-02-07 20:33:45 +11:00
Andrew Tridgell 23e1b2e271 HAL_ChibiOS: added paranoid state checking on I2C
this is here just while debugging an issue with Mark
2018-02-07 20:33:45 +11:00
Andrew Tridgell 7e19f49e42 HAL_ChibiOS: fixed DMA lock in SoftSigReader 2018-02-07 20:33:45 +11:00
Andrew Tridgell 1aa6a0068a HAL_ChibiOS: fixed order of I2C DMA
this was harmless, but confusing for debugging
2018-02-07 20:33:45 +11:00
Andrew Tridgell 111e5b6268 HAL_ChibiOS: change USB ID for revo-mini 2018-02-07 20:33:45 +11:00
Andrew Tridgell 4d018cf5e2 HAL_ChibiOS: take lock on DMA allocate/deallocate
this is required for the stm32_dma_stream bitmask manipulation
2018-02-07 20:33:45 +11:00
Andrew Tridgell bc49c0d2c5 HAL_ChibiOS: make hwdef.h the same on python2 and python3
and output to /tmp by default to prevent accidental use of old hwdef.h
in the build
2018-02-07 20:33:45 +11:00
Andrew Tridgell e002fbdb8d HAL_ChibiOS: fixed a build warning 2018-02-07 20:33:45 +11:00
Andrew Tridgell 077aa24c6d HAL_ChibiOS: add more pins for revo-mini port 2018-02-07 20:33:45 +11:00
Andrew Tridgell e91144cc8e HAL_ChibiOS: allow for empty UART drivers
allows for boards with no default GPS port
2018-02-07 20:33:45 +11:00
Andrew Tridgell e0212ebe85 HAL_ChibiOS: cope with ETR timer channels
trean the ETR capability as a separate AF
2018-02-07 20:33:45 +11:00
Andrew Tridgell c1df2a8a4b HAL_ChibiOS: cope with timers 10 and later 2018-02-07 20:33:45 +11:00
Andrew Tridgell d191b37520 HAL_ChibiOS: cope with having no ADC inputs 2018-02-07 20:33:45 +11:00
Andrew Tridgell 87389e0fdc HAL_ChibiOS: fixed double DMA allocation on i2c 2018-02-07 20:33:45 +11:00
Andrew Tridgell 19e1349d0a HAL_ChibiOS: setup serial5 for fmuv3 ESP8266 2018-02-07 20:33:45 +11:00
Andrew Tridgell 560948dc69 HAL_ChibiOS: fixed GPIOs for ESP8266 port 2018-02-07 20:33:45 +11:00
Andrew Tridgell fa96e23552 HAL_ChibiOS: setup correct volt and current pins
use hwdef.dat to specify battery pins
2018-02-07 20:33:45 +11:00
Andrew Tridgell 85acbcb21d HAL_ChibiOS: fixed UART send from TX complete IRQ 2018-02-07 20:33:45 +11:00
Andrew Tridgell 63a825dd2c HAL_ChibiOS: don't call spiStart() unless bus is stopped 2018-02-07 20:33:45 +11:00
Andrew Tridgell e29b79f41b HAL_ChibiOS: fixed DMA allocation bug on SPI
thanks to Mark Whitehorn for finding this crash
2018-02-07 20:33:45 +11:00
Andrew Tridgell 29add8a880 HAL_ChibiOS: fixed build without FATFS enabled 2018-02-07 20:33:45 +11:00
Andrew Tridgell 6b187b393a HAL_ChibiOS: fixed fmuv4 build 2018-02-07 20:33:45 +11:00
Siddharth Purohit e1a8bba58b HAL_ChibiOS: increase the stack size for uavcan thread 2018-02-07 20:33:45 +11:00
Siddharth Purohit 77f8acd7a1 HAL_ChibiOS: add CAN to supported peripherals list 2018-02-07 20:33:45 +11:00
Siddharth Purohit 6f21c1583f HAL_ChibiOS: add definitions to support uavcan in fmuv3 2018-02-07 20:33:45 +11:00
Siddharth Purohit edd0e8d2f5 HAL_ChibiOS: add CANManager to ChibiOS namespace 2018-02-07 20:33:45 +11:00
Siddharth Purohit 143686f70d HAL_ChibiOS: add placeholder cstdio header 2018-02-07 20:33:45 +11:00
Siddharth Purohit 539d5adc13 hwdef: add more posix methods 2018-02-07 20:33:45 +11:00
Siddharth Purohit 288f6b1fa0 HAL_ChibiOS: add chibios cpp wrapers, libuavcan's stm32 driver uses it 2018-02-07 20:33:45 +11:00
Siddharth Purohit f2e77ab773 AP_HAL_ChibiOS: add uavcan thread 2018-02-07 20:33:45 +11:00
Siddharth Purohit 3c009cf02c AP_HAL_ChibiOS: add CAN driver 2018-02-07 20:33:45 +11:00
Andrew Tridgell b992b5e02a HAL_ChibiOS: allow for 16kHz brushed on all timers 2018-02-07 20:33:45 +11:00
Andrew Tridgell b0d0ee1f01 HAL_ChibiOS: reformat using yapf and support python3
allow hwdef.h compilation using python3
2018-02-07 20:33:45 +11:00
Andrew Tridgell 67e0ba22fe HAL_ChibiOS: fixed some errors in F405 tables 2018-02-07 20:33:45 +11:00
Andrew Tridgell 70ff3871e0 HAL_ChibiOS: fixed RC in on CH1 of timer 2018-02-07 20:33:45 +11:00
Andrew Tridgell 890d322b47 HAL_ChibiOS: starting on mini-pix hwdef.dat
for RadioLink mini-pix board
2018-02-07 20:33:45 +11:00
Andrew Tridgell 23555f4c25 HAL_ChibiOS: allow for empty storage during bringup
useful when storage backend driver isn't written yet
2018-02-07 20:33:45 +11:00
Andrew Tridgell ecce2a73d0 HAL_ChibiOS: Storage::_timer_tick is an override 2018-02-07 20:33:45 +11:00
Andrew Tridgell 713006bb1d HAL_ChibiOS: allow more OTG defines to be overridden 2018-02-07 20:33:45 +11:00
Andrew Tridgell 1fb257a35a HAL_ChibiOS: initial hwdef.dat for revo mini 2018-02-07 20:33:45 +11:00
Andrew Tridgell 979a2a4796 HAL_ChibiOS: removed debug code 2018-02-07 20:33:45 +11:00
Siddharth Purohit 538af2a58a HAL_ChibiOS: fix parity and stop bit setting 2018-02-07 20:33:45 +11:00
Mark Whitehorn b94b1dcd97 AP_HAL_ChibiOS: add missing declaration 2018-02-07 20:33:45 +11:00
Siddharth Purohit df4bf7e476 HAL_ChibiOS: fix irq clash with unnecessary access to readbuf ring buffer 2018-02-07 20:33:45 +11:00
Siddharth Purohit 02696882e9 HAL_ChibiOS: if unbuffered write, do continue to invoke DMA writes
adds higher latency to device sharing DMA
2018-02-07 20:33:45 +11:00
proficnc c613c0bde2 added the cube red hardware definition 2018-02-07 20:33:45 +11:00
Andrew Tridgell 3dacbd1b36 HAL_ChibiOS: hold write lock for unbuffered writes 2018-02-07 20:33:45 +11:00
Andrew Tridgell ad26ca4a27 HAL_ChibiOS: implement parity and stop bits controls 2018-02-07 20:33:45 +11:00
Andrew Tridgell 2e15285c51 HAL_ChibiOS: refuse unbuffered writes without DMA
we would need much more complex code to handle this
2018-02-07 20:33:45 +11:00
Andrew Tridgell 3f2cc2c9d6 HAL_ChibiOS: implement low latency UART writes
this implements the set_unbuffered_writes() API by performing writes
directly in the write() call and not from a timer
2018-02-07 20:33:45 +11:00
Andrew Tridgell 015c3a1fa3 HAL_ChibiOS: removed duplicate defines 2018-02-07 20:33:45 +11:00
Andrew Tridgell 865e4f3104 HAL_ChibiOS: implement _timer_tick in UARTDriver 2018-02-07 20:33:45 +11:00
Andrew Tridgell a5bafb399f HAL_ChibiOS: adjust SPI pin speeds 2018-02-07 20:33:45 +11:00
Andrew Tridgell 7b251c9739 HAL_ChibiOS: lower FRAM CS speed to 2MHz
this matches old firmware
2018-01-20 17:40:07 +11:00
Andrew Tridgell 30fd2da108 HAL_ChibiOS: enable RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell 63671b06a8 HAL_ChibiOS: added HAL_I2C_MAX_CLOCK define 2018-01-20 17:40:07 +11:00
Andrew Tridgell 88f11f5a50 HAL_ChibiOS: added HAL_I2C_BUS_BASE
this allows fmuv4 to start at bus 1
2018-01-20 17:40:07 +11:00
bugobliterator c60c0b8ab1 HAL_ChibiOS: fix undef line processing 2018-01-20 17:40:07 +11:00
Andrew Tridgell 8286486890 HAL_ChibiOS: drop default SPI priority to 179 2018-01-20 17:40:07 +11:00
Andrew Tridgell ab748034a2 HAL_ChibiOS: removed RC inversion logic
not needed any more
2018-01-20 17:40:07 +11:00
bugobliterator 7db19cfae0 HAL_ChibiOS: use separate parameter for detect timeout 2018-01-20 17:40:07 +11:00
Andrew Tridgell 613d7a47ba HAL_ChibiOS: support RCIN on mindpx-v2 2018-01-20 17:40:07 +11:00
bugobliterator 02c7513f83 HAL_ChibiOS: add invert method and fix width measurement 2018-01-20 17:40:07 +11:00
bugobliterator f7ac5aa079 HAL_ChibiOS: put rcin on a separate thread 2018-01-20 17:40:07 +11:00
Andrew Tridgell f50f427a59 HAL_ChibiOS: added comment on beta fmuv4 board 2018-01-20 17:40:07 +11:00
Andrew Tridgell 743806116d HAL_ChibiOS: removed unusued ppm driver
now uses AP_RCProtocol
2018-01-20 17:40:07 +11:00
Andrew Tridgell ccb85c2707 HAL_ChibiOS: fixed fmuv3 build with no ICU 2018-01-20 17:40:07 +11:00
Andrew Tridgell 33c7cba9af HAL_ChibiOS: use more efficient push mechanism in IRQ
and don't use push_force() as it is not safe to do reads from within
the producer
2018-01-20 17:40:07 +11:00
Andrew Tridgell 7a4f429b85 HAL_ChibiOS: don't adjust buffer size for protocol
its all about IRQ latency, not IRQ rate
2018-01-20 17:40:07 +11:00
Andrew Tridgell e2c8fe27ef HAL_ChibiOS: fixed memory handling in SoftSigReader 2018-01-20 17:40:07 +11:00
bugobliterator eeea2c9961 HAL_ChibiOS: use software signal reader for RCInput if available 2018-01-20 17:40:07 +11:00
bugobliterator 6be4c710c3 HAL_ChibiOS: add Software Signal reader using timer and DMA 2018-01-20 17:40:07 +11:00
bugobliterator 1db1ff799e HAL_ChibiOS: modify hwdef scripts to setup for generic RCIN 2018-01-20 17:40:07 +11:00
bugobliterator 1970d8a2c8 HAL_ChibiOS: use common RCIN pin for fmuv4 2018-01-20 17:40:07 +11:00
bugobliterator 445ba6ed39 HAL_ChibiOS: update ppm to use Extended ICU driver 2018-01-20 17:40:07 +11:00
Andrew Tridgell 7c23e33775 HAL_Chibios: set min output rate for oneshot to 100Hz
this will keep ESCs happy during gyro cal
2018-01-20 17:40:07 +11:00
Andrew Tridgell b07c599bf2 Hal_Chibios: allow for faster INS sample times
we need higher priority on SPI and faster device loops
2018-01-20 17:40:07 +11:00
Andrew Tridgell 25f13ed518 HAL_Chibios: adjust MPU9250 clock speed down
this helps with fast sampling enabled
2018-01-20 17:40:07 +11:00
Andrew Tridgell 7e44b06440 HAL_ChibiOS: adjust SPI clock rates on FMUv4
this prevents some timing errors on the IMUs
2018-01-20 17:40:07 +11:00
Andrew Tridgell dd59a5ff57 HAL_ChibiOS: adjust external bus clock for mpu9250
this fixes an issue with fast sampling on the PH2.1 cube
2018-01-20 17:40:07 +11:00
Andrew Tridgell 880a84294e HAL_ChibiOS: support oneshot mode
supports oneshot 125 and oneshot
2018-01-20 17:40:07 +11:00
Andrew Tridgell ba3cdf74b5 HAL_Chibios: optional ADC debugging
this debugging capability is very useful on board bringup. It outputs
the first 6 analog channels as an AP_ADC MAVLink message
2018-01-20 17:40:07 +11:00
Andrew Tridgell c863681849 HAL_ChibiOS: fixed PWM output assignment 2018-01-20 17:40:07 +11:00
Andrew Tridgell 82c6d2751f HAL_ChibiOS: fixed F412 ram and flash setup 2018-01-20 17:40:07 +11:00
Peter Barker 67bed1d6c2 HAL_ChibiOS: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Andrew Tridgell f6138e3c91 HAL_ChibiOS: use calloc in preferance to malloc 2018-01-17 11:22:05 +11:00
Andrew Tridgell 8dae3fe59b HAL_ChibiOS: use calloc for malloc type
this is not strictly necessary on ChibiOS as we already override
malloc, but will keep static analysis happy
2018-01-17 11:22:05 +11:00
Andrew Tridgell 7ca3b56886 HAL_ChibiOS: fixed STM32F405 typos 2018-01-16 09:46:30 +11:00
Andrew Tridgell e120e912f1 HAL_ChibiOS: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell e2a65c8c60 HAL_ChibiOS: added support for AP_Terrain for ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell cde930f5c8 HAL_ChibiOS: added skyviper-v2450 hwdef config 2018-01-15 11:46:02 +11:00
Andrew Tridgell c8beddf1e4 HAL_ChibiOS: allow for includes in hwdef.dat files
this allows creation of derived boards
2018-01-15 11:46:02 +11:00
Andrew Tridgell 2929b3dbb1 HAL_ChibiOS: allow builds on systems with no SDIO 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7b0eccc309 HAL_ChibiOS: updated skyviper-f412 hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell 60a773d045 HAL_ChibiOS: removed duplicate defines 2018-01-15 11:46:02 +11:00
Andrew Tridgell ef1a14cc6c HAL_ChibiOS: fixed 5V analog scale on fmuv4 and mindpx-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 867e7ebf71 HAL_ChibiOS: auto-generate GPIO table from hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell fbe8166c71 HAL_ChibiOS: auto-generate AnalogIn pin table 2018-01-15 11:46:02 +11:00
Andrew Tridgell f14a847b97 HAL_ChibiOS: rename classes to remove 'Chibi'
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
2018-01-15 11:46:02 +11:00
Andrew Tridgell 25b68dc150 HAL_ChibiOS: switch base freq when needed
timers can't do below 123 Hz with a clock of 8MHz, so we need to
change clock frequency based on the target period
2018-01-15 11:46:02 +11:00
Andrew Tridgell 738d70ef02 HAL_ChibOS: fixed handling of disabled channels 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2978649cd4 waf: moved to generated loader script 2018-01-15 11:46:02 +11:00
Andrew Tridgell 6e4ef32628 HAL_ChibiOS: moved to generated loader script 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9482ab1840 waf: use common makefile for ChibiOS if no custom present 2018-01-15 11:46:02 +11:00
Andrew Tridgell bae9469af7 HAL_ChibiOS: use a common makefile and board.c
allow for custom files per board if supplied, but don't require them
for every board
2018-01-15 11:46:02 +11:00
Andrew Tridgell d17e9f321a HAL_ChibOS: fixed mixture of brushed and normal PWM
allow non-brushed PWM servos with brushed main motors
2018-01-15 11:46:02 +11:00
Andrew Tridgell c639708e22 HAL_ChibOS: auto-generate full PWM config
use PWM markers in hwdef.dat to mark each PWM channel
2018-01-15 11:46:02 +11:00
Andrew Tridgell daa9eec836 HAL_ChibiOS: auto-configure timer channels
allow for one marked PPMIN for input
2018-01-15 11:46:02 +11:00
Andrew Tridgell d65ec2ada7 HAL_ChibiOS: moved more headers to common
allow customisation, but don't require every port to copy the defaults
2018-01-15 11:46:02 +11:00
Andrew Tridgell 960bc40ff3 HAL_ChibiOS: moved to a common mcuconf.h 2018-01-15 11:46:02 +11:00
Andrew Tridgell 48d2704cf4 HAL_ChibiOS: CS pins don't need to be a single SPI BUS
its possible to use a CS pin on different buses, so they should not
have a particular bus tag
2018-01-15 11:46:02 +11:00
Andrew Tridgell a554215576 HAL_ChibiOS: start to cope with not having I2C, SPI and UARTs 2018-01-15 11:46:02 +11:00
Andrew Tridgell f5c8754d75 HAL_ChibiOS: use ARRAY_SIZE_SIMPLE
this allows for boards without a device type (eg. no SPI bus)
2018-01-15 11:46:02 +11:00
Andrew Tridgell 468cadca45 HAL_ChibiOS: auto-generate UART driver declarations 2018-01-15 11:46:02 +11:00
Andrew Tridgell 58796ff435 HAL_Chibios: moved SPI device tables to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell d1f93cd66c HAL_Chibios: auto-generate I2C, SPI and UART device lists
this is less error prone and make a port faster as more information is
in hwdef.dat
2018-01-15 11:46:02 +11:00
Andrew Tridgell 280140bf25 HAL_ChibiOS: added support for MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 9f5e01d20a HAL_Chibios: fixed FMUv4 compasses 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2646b9ef33 HAL_Chibios: matched debug port speed to NuttX 2018-01-15 11:46:02 +11:00
Andrew Tridgell 41be81af34 HAL_Chibios: added hardware flow control for UARTs
implement RTS in software and CTS in hardware
2018-01-15 11:46:02 +11:00
Andrew Tridgell 9916a93919 HAL_ChibiOS: fixed I2C device list 2018-01-15 11:46:02 +11:00
Andrew Tridgell f135e73e04 HAL_ChibiOS: F412 doesn't have CCM ram 2018-01-15 11:46:02 +11:00
Andrew Tridgell c3435e45c5 HAL_ChibiOS: initial port to FMUv4 2018-01-15 11:46:02 +11:00
bugobliterator 5feef04f5f HAL_ChibiOS: add support for CCM memory
this uses DMA bounce buffers for bus transfers, and falls back to CCM
ram in allocations if the type is unspecified
2018-01-15 11:46:02 +11:00
Andrew Tridgell 36227aa126 HAL_ChibiOS: implement bus speed and smbus for I2C
use the slowest speed of all devices on the bus
2018-01-15 11:46:02 +11:00
Andrew Tridgell 4b5e617673 HAL_ChibiOS: added missing DMA table for STM32F405 2018-01-15 11:46:02 +11:00
Peter Barker f3d46506b0 AP_HAL_Chibios: warning fixes 2018-01-15 11:46:02 +11:00
Andrew Tridgell 791edee0ff HAL_Chibios: added more SPI devices for FMUv3 2018-01-15 11:46:02 +11:00
Andrew Tridgell 755eca31c2 HAL_Chibios: don't unregister shared DMA
the shared DMA handle is a property of the bus, not the device, so
should not be unregistered when the device is removed
2018-01-15 11:46:02 +11:00
Andrew Tridgell 9812fc9574 HAL_Chibios: prevent creation of i2c devices on invalid bus 2018-01-15 11:46:02 +11:00
Andrew Tridgell b62773bbad HAL_ChibiOS: improved auto-config of ADC pins
ADC config now based on pin_scaling array
2018-01-15 11:46:02 +11:00
Andrew Tridgell 1cc4b92b76 HAL_ChibiOS: added additional FMUv3 analog pins 2018-01-15 11:46:02 +11:00
Andrew Tridgell aa2175ec0c HAL_ChibiOS: show ADC1 channels in hwdef.h 2018-01-15 11:46:02 +11:00
Andrew Tridgell 5a7e2f75d1 HAL_ChibiOS: added ADC1_Map to STM32 tables 2018-01-15 11:46:02 +11:00
Andrew Tridgell 3a004adbd4 HAL_Chibios: use macro for NUM_GROUPS 2018-01-15 11:46:02 +11:00
Andrew Tridgell b57f8f01c6 HAL_Chibios: fixed return for read on invalid gpio pin 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7971f03bde Hal_Chibios: fixed F412 SPI config 2018-01-15 11:46:02 +11:00
Andrew Tridgell 21f40da510 HAL_Chibios: align GPIO pins with px4 build 2018-01-15 11:46:02 +11:00
Andrew Tridgell 26d6947bf6 HAL_ChibiOS: fixed PWM output 2018-01-15 11:46:02 +11:00
Andrew Tridgell c742543565 HAL_Chibios: align SPI device IDs with px4 IDs
this makes for easier update to ChibiOS without redoing accelcal
2018-01-15 11:46:02 +11:00
Andrew Tridgell 6dbab450a5 Hal_Chibios: use AP_BoardConfig::io_enabled() 2018-01-15 11:46:02 +11:00
Andrew Tridgell 86fbdcd060 HAL_ChibiOS: ensure malloc returns zeroed memory 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8b6bab7b17 HAL_Chibios: added ChibiOS HAL
this is based on initial work by Sid, reset here for easier merging
2018-01-15 11:46:02 +11:00