Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
55,178 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

256 Commits

Author SHA1 Message Date
Matt Lawrence e5bc18dbe8 Frame Params: Disable watchdog for Solo 
Set BRD_OPTIONS to zero to disable watchdog on Solo with Copter 3.7-dev.
 2019-05-09 07:51:05 +09:00
Matt Lawrence 4d1c1bd380 Frame Params: Update solo arming check params 
No longer need to ignore logging prearm failure
 2019-05-08 11:53:47 +10:00
Peter Barker 9474fa1120 Tools: remove byte order mark from Solo params file 2019-04-19 20:46:03 +09:00
Michael du Breuil ec1b6db83b Tools: Remove BRD_SERIAL_NUM from parameter files 2019-04-08 18:18:32 -07:00
Randy Mackay 2f82af9fdf Tools: SkyViper-F412 defaults to use pixart flow sensor 2019-04-08 11:26:59 +09:00
Randy Mackay 26ec280507 Tools: add HK-HydroPro-Inception parameter file 2019-03-26 16:47:16 +09:00
Matt Lawrence 557a20eaa7 Frame Params: Update solo's default parameters 
Update solo's param files.
- Make battery parameters consistent across versions
- Remove unnecessary compass params
- Speed up param stream rate to 30
 2019-01-28 08:46:00 +09:00
Tom Pittenger 99120cddf9 Frame_params: add SkykWalker X8 param files 2019-01-15 09:47:59 -07:00
lordneeko fb212907a1 Tools: Update SV2450 default.parm file for AC-3.6 
Update default parameters for Skyviper 2450 GPS battery failsafes, changed in AC-3.6
 2019-01-05 09:47:51 +09:00
Matt 441222e80b Frame_params: Update to Solo parameters 
New changes related to motor PWM, motor output, slew time, and RC6 trim
 2018-12-10 08:51:13 +09:00
Matt 5d000613a5 Frame_params: Update Solo's required parameters 
Adds Solo parameter files for  Copter 3.7 on both Cube Black and Cube
Green.  Updates the file names for the existing Solo Copter 3.6 and
Copter 3.5 parameter files.  The 3.7 files are now referenced by the
Solo's ChibiOS hwdef files.
 2018-12-04 12:54:55 +09:00
ChristopherOlson 2d89bcaef6 Tools:TradHeli - update param files to lower gains for ACCZ_P, and Position Controller velocity request 2018-08-17 15:05:04 +09:00
Randy Mackay 31bfedafa2 Tools: add arduroller balance bot parameter defaults 2018-08-11 12:56:51 +09:00
ChristopherOlson cbe68b4a91 Tools:TradHeli - update Copter3.6 setup params and add param files for QGC 
add new Copter3.5 to 3.6 upgrade params to set the PSC, LOIT
and NAV controllers for New Loiter and new Position Controller
 2018-08-09 08:42:19 +10:00
Matt d0a613225f Frame_Params: Update for Solo on AC36-RC7 2018-08-06 09:34:02 +09:00
Lucas De Marchi 604deaf4ba Frame_params: remove safety mask from intel-aero-rtf 
Now we can build without it, so there's no need to set this param.
 2018-08-02 13:15:02 -07:00
Peter Barker 0f50cf96ca Tools: Frame_Params: correct for CH7 -> RC7 change 2018-08-02 08:26:03 +10:00
Randy Mackay cc0b3705e9 Tools: default param file for Thunder Tiger Toyota Hilux 2018-07-06 14:47:15 +09:00
Lucas De Marchi 981a575aa2 Frame_params: rename some aerofc parameters 
Now that we don't panic() on unknown parameters, we can boot even with
wrong parameters. This brings the default parameters of aerofc to be up
to date.

The following parameters were not removed and will be warned:

WPNAV_LOIT_JERK
WPNAV_LOIT_MAXA
WPNAV_LOIT_MINA
WPNAV_LOIT_SPEED

There are no clear substitute for those, so they are staying until we
know if they should be renamed/changed/removed.
 2018-06-28 10:18:19 -07:00
Randy Mackay 8c485e1a9e Tools: set ground effect comp in tradheli default parameters 2018-06-08 09:51:50 +09:00
Randy Mackay 3ecc0ea6c8 Tools: add hydrotek boat default parameters 2018-05-29 16:07:55 +09:00
Randy Mackay f2ac48a33e Tools: update holybro kospi1 default 2018-05-28 10:42:21 +09:00
Randy Mackay 268fac0fba Tools: default params for Holybro Kospi1 2018-05-28 10:11:45 +09:00
ChristopherOlson 087fd4effc Tools: Add default tuning params for single-rotor TradHeli 
Tunes PSC, LOIT, NAV, ATC specific to Copter 3.6 and New Loiter
 2018-05-11 12:28:14 +09:00
Randy Mackay 94a1a025f1 Tools: update AION R1 default params 2018-04-26 14:07:08 +09:00
Randy Mackay 7f7a588002 Tools: add accel and turn-rate max and increase steering angle P 
these parameters were added to Rover-3.3
 2018-04-23 11:06:34 +09:00
Randy Mackay 1b26f8527a Tools: remove RC params from eLAB445 param file 2018-04-17 08:35:36 +09:00
Randy Mackay 741d641876 Tools: remove unused real-flight default param files 2018-04-17 08:32:25 +09:00
Randy Mackay 781a0b457b Tools: update WLToys v383 roll and pitch rate gains 2018-04-13 18:38:38 +09:00
Randy Mackay 2f26b3faa1 Copter: update HeliQuad param file 
fix servo range and reverse params
 2018-04-09 16:42:38 +09:00
Randy Mackay 80e5742d77 Tools: correct HeliQuad param file 2018-04-09 08:42:00 +09:00
Jacob Walser 9897ff60de Frame_params: Add BlueROV2 Heavy param file 2018-02-28 13:22:08 -05:00
nicknunno 72b698bf96 Tools: update AION default param 
Add servo-function reversed, compass offset maximum
 2018-02-12 16:56:46 +09:00
Andrew Tridgell 330fa815e8 Frams_params: updates for new pos controller for skyviper 2018-02-08 18:56:51 +11:00
Andrew Tridgell 238db04187 Frame_Params: set TMODE_ENABLE=2 for the F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell ca12d99430 Frame_Params: fixed orientation on F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 76703a80c4 Frame_params: disable unpopulated serial ports 2018-02-08 17:36:33 +11:00
Andrew Tridgell 3b5bb3cae2 Frame_params: default to CC2500 radio for F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 5eb29f94ce Frame_Params: update config for Skyviper-2450 2018-02-08 17:36:33 +11:00
Andrew Tridgell 674bf12f6e Frame_params: fixed ordering of F412 motors 2018-02-08 17:36:33 +11:00
Andrew Tridgell ebeda12953 Frame_params: added defaults for SkyViper-F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 360a8d99bf Frame_params: bring 2450 params in line with release 2018-01-15 11:46:02 +11:00
Andrew Tridgell 40ba4645e6 Frame_params: added SkyViper 2450GPS params for ChibiOS 2018-01-15 11:46:02 +11:00
Matt 9f1c96bb09 Tools: Solo AC 3.6 parameters 
Parameters for a 3DR Solo running ArduCopter 3.6, since there are some
differences from 3.5.
 2018-01-11 11:14:12 +09:00
Matt a766551a48 Tools: Solo AC 3.5 disable log prearm check 
There are still intermitant false-positive logging failure happening in
ArduCopter.  This disables the logging arming check for the time being.
This was set back to 1 a few months ago thinking the issue was fixed.
But it turns out it is not.
 2018-01-11 11:13:53 +09:00
Randy Mackay af7bb7cbd7 Tools: update eLAB VEK default parameters 
Add default steering feedforward value
 2018-01-04 16:15:28 +09:00
Randy Mackay 7b0b9f10de Tools: AION R1 default params use steering feed-forward 
Also add wheel encoder defaults
 2018-01-04 14:03:52 +09:00
Randy Mackay 368698d173 Tools: AION R1 default remove compass-external 
compass-external settings should normally not need to be set
 2018-01-04 14:02:53 +09:00
NickNunno 94eceddf69 Tools: update AION R1 default parameters 
Added default presets to match documentation & hardware setup.
 2018-01-04 13:51:04 +09:00
Randy Mackay dcb37a2454 Tools: default param file for AION R1 rover 2017-12-23 14:25:25 +09:00
Matt 41f2e8869e FRAME_PARAMS: Solo mag and arming param update 
Updates the arming check to all
Updates the required compass parameters
Updates the compass_typemask to disable the LIS3MDL
 2017-12-23 10:58:03 +09:00
murata 0934bdb5dc Tools: remove default values from eLAB 445 params 2017-11-16 22:48:13 +09:00
Jacob Walser 83bb1e7f4a Frame_params: (BlueROV2/Sub-3.5.2) update tilt servo reversal 2017-11-14 18:10:45 -05:00
Jacob Walser 305f203dd3 Frame_params: (BlueRov2/Sub-3.5.2) Reset to defaults 2017-11-13 21:08:55 -05:00
Jacob Walser 67eefe3d6a Frame_params: (BlueRov2/Sub-3.5.2) Use integers for APInts 2017-11-13 20:57:43 -05:00
Jacob Walser acb65b99ac Frame_params: add file for BlueROV2 on Sub 3.5.2 2017-11-13 15:42:04 -05:00
TsuyoshiKawamura 3467be6695 Tools: update eLAB-445 parameter file 2017-11-01 14:07:43 +09:00
Andrew Tridgell 3a78255e54 Frame_Params: added WLToys V383 parameters 
for HeliQuad frame
 2017-10-03 10:16:41 +11:00
Lucas De Marchi 015242c89b Tools: add params for Aero Compute Board 
These are the parameter for Aero Compute Board to fly Intel Aero RTF
without the flight controller, using just the internal sensors
on the Linux side.
 2017-09-21 07:59:20 -07:00
Randy Mackay ebea292d63 Tools: add frame params for eLAB 470 quad 2017-09-13 17:55:05 +09:00
Jacob Walser 19086e34f0 Frame_params: update BlueROV2 defaults for 3.5.1 2017-08-30 17:49:34 -04:00
Andrew Tridgell 224dc439ab Tools: updated parameters to remove ELEVON and VTAIL settings 2017-08-01 08:25:32 +10:00
Matt 3fd393bc21 FRAME_PARAMS: Solo final parameters for AC 3.5.0+ 
This is the final list of parameters the Solo requires for ArduCopter
3.5.0+ that differ from ArduCopter 3.5.0 defaults.  I ran a
`mavparmdiff` on the defaults vs Solo to generate this list.  I added
`FRAME_TYPE` back even though it is default just because it is rather
critical. I removed all the parameters that are individual vehicle
specific (calibrations, pressure, etc).
 2017-07-17 09:09:35 +09:00
Randy Mackay 59503f15cb Tools: update eLAB VEK AI parameters 2017-06-29 16:14:15 +09:00
Randy Mackay bee666cd7a Tools: update eLAB VEK rover param file 2017-06-28 15:40:21 +09:00
murata 0a57177cee Tools: eLab LAB445 parameter file 2017-06-28 10:26:25 +09:00
Randy Mackay d934088660 Tools: update realflight simulator params 2017-06-26 17:28:48 +09:00
Randy Mackay 62903b7639 Tools: add realflight standard params 2017-06-26 13:08:05 +09:00
Randy Mackay e6f1e14b61 Tools: fix eLab VEK parameter file 2017-06-24 13:29:59 +09:00
Randy Mackay 58dd0592ad Tools: eLAB VEK default param update 
We should always require arming, thanks @khancyr for noticing this!
 2017-06-21 18:20:59 +09:00
Randy Mackay f8ee82e708 Tools: remove old 3DR standard param files 2017-06-21 15:16:49 +09:00
Randy Mackay 0037ec086a Tools: rename param files for eLAB 2017-06-21 15:08:38 +09:00
Randy Mackay 3159361970 Tools: add param file for eLAB VEK AI rover 2017-06-21 15:08:38 +09:00
Randy Mackay 32cb3f8764 Tools: add e-flight convergence parameter file 2017-06-12 09:41:33 +09:00
Jacob Walser 1a52acc99e Frame_params: Remove calibration parameters from bluerov2 standard 2017-05-27 11:30:56 -04:00
Jacob Walser 193e590592 Frame_params: add standard bluerov2 parameter file 2017-05-27 11:30:56 -04:00
Andrew Tridgell fd6625e09d Frame_params: drop target temp for Solo to 45 2017-05-24 08:41:16 +10:00
Lucas De Marchi cacfc4cb2f Tools: set mavlink log backend for Intel Aero RTF 2017-04-22 10:58:26 +09:00
Randy Mackay 3df5484a39 Tools: update intel aero default params 
Increase expected barometer noise, reduce roll gains
 2017-04-20 14:07:03 +09:00
Randy Mackay 56281f9c79 Tools: update intel aero default params 2017-04-20 10:58:11 +09:00
Randy Mackay 41d999994a Tools: update intel aero rtf default parameters 2017-04-18 20:32:36 +09:00
Matt 29adf300ee Tools: update default Solo parameters running AC3.5 2017-04-18 11:00:26 +09:00
Randy Mackay 835aa56777 Tools: intel aero params enable failsafes 2017-04-15 18:39:13 +09:00
Andrey Kolobov 2ed63d24bd XPlane: adding airfoils required to for XPlane 
needed to load some of the RC sailplane models used for SITL
 2017-04-10 19:11:24 +10:00
Lucas De Marchi 2ff720f99f Frame_params: add default params for Intel Aero RTF 2017-03-24 12:06:19 +11:00
Randy Mackay e3bca10e9a Tools: fix Solo param file name 2017-03-14 11:36:08 +09:00
Randy Mackay 6e47eaf3c2 Tools: initial Solo default params 
These are not perfect but it's a start
 2017-03-14 11:10:19 +09:00
Randy Mackay c9ff028ec3 Tools: update IRIS param file for AC3.5 2017-02-28 16:43:09 +09:00
Randy Mackay cc67335b26 Tools: update EnRoute frame parameters 2017-02-28 14:09:41 +09:00
Julien Beraud a5523a4b94 Frame_Params: Remove unexisting param 
FRAME has disappeared and causes a crash at startup
 2017-01-23 21:23:16 +11:00
Mathieu OTHACEHE 4daa4e9df9 Tools: remove deleted parameters 
RCx_REV and SERVO_RNG_ENABLE no longer exists, they need to be erased
from param files.
 2017-01-13 20:19:30 +11:00
Randy Mackay 07e5b43132 Tools: add FRAME_CLASS to bebop parameter files 2017-01-13 07:46:27 +09:00
Andrew Tridgell 7c058c922f Tools: removed ARSPD_ENABLE parameters 2016-12-05 16:51:49 -08:00
Randy Mackay 3576d06638 Tools: EX700 proximity ignores legs 2016-11-26 11:39:26 +09:00
Randy Mackay 7e031262c3 Tools: remove duplicate from Bebop2 params file 2016-11-07 09:54:58 +09:00
Randy Mackay d9e476c96f Tools: Bebop2 param get radio failsafe 
put params in alphabetical order
 2016-11-07 09:53:37 +09:00
Randy Mackay fb47480b51 Tools: Bebop params get ground effect compensation 
Also put in alphabetical order
 2016-11-07 09:52:41 +09:00
Randy Mackay b34c14ef67 Tools: update EX700 parameter file 
swapped around lidar, TX1 and SF40c input channels
 2016-11-05 17:10:40 +09:00
Randy Mackay c19ef757ef Tools: add IRIS AC3.4 params file 2016-11-03 12:38:56 +09:00
Mathieu OTHACEHE 5e42800b5e Disco: add LED support 
Use RGBLed generic implementation to support Disco LED.
 2016-10-26 11:56:11 -03:00