Willian Galvani
258d1a1e98
Tools: fix MOT_PWM_MIN/MAX for sub params
2022-10-20 23:42:14 -03:00
Andrew Tridgell
aaf7e38fdf
Tools: added parameters for Foxtech Altair 370
...
a really interesting and high performance quadplane
2022-10-07 11:27:10 +11:00
Randy Mackay
273a72f0d5
Tools: SToRM32 mavlink param update for MNT rename
...
incorporates change to mount RC input method
2022-09-06 13:53:25 +09:00
Randy Mackay
e0ce8035b9
Tools: arduroller balance bot param update
2022-06-15 08:40:12 +09:00
Pierre Kancir
020bd0ba1e
Tools: fix exec permission
2022-06-08 08:16:42 +09:00
Randy Mackay
e1d7b81f9d
Tools: update holybro s500 default params
2022-05-19 08:39:32 +09:00
Andrew Tridgell
69508804b4
Tools: added Foxtech GreatShark parameters
2022-05-10 15:12:38 +10:00
Andrew Tridgell
38c3c965cb
Tools: rename quadplane param files
...
follws convention used in MissionPlanner for frame file selection
2022-05-10 11:38:52 +10:00
Andrew Tridgell
6bfaa3ef62
Tools: added notch params for quadplanes
2022-05-05 17:49:24 +10:00
Andrew Tridgell
ab9d13f5dd
Tools: added SparkleTech airframes
2022-05-05 17:45:17 +10:00
Andrew Tridgell
bd1df121f8
Tools: added MFD CrossWind VTOL parameters
2022-05-04 17:35:50 +10:00
Andrew Tridgell
8c1c948e24
Tools: added frame parameters for two quadplanes
2022-05-03 08:52:40 +10:00
Andy Piper
8e0f83aaae
Tools: iFlight Chimera 7 parameters
2022-04-27 17:51:56 +10:00
Andrew Tridgell
db9d796dd4
Tools: update for changed INS_NOTCH parameter name
2022-04-16 08:14:06 +10:00
murata
53d8d9b58e
Frame_params: Add DJI AGRAS MG-1
2022-02-26 08:28:45 +09:00
Bill Geyer
12210f9066
Tools: tradheli-change param name from _VFF to _FF
2022-02-04 08:03:38 +09:00
Randy Mackay
3b34087977
Tools: DeSET mapping boat default parameters
...
This frame will be added as a reference frame to the wiki
2021-11-05 22:42:12 +09:00
Leonard Hall
3d68d9c32a
Frame_params: update FILT to FLTE
2021-08-10 08:33:56 +09:00
Iampete1
8544d00c97
Tools: rename TURN_MAX_G to ATC_TURN_MAX_G in param sets
2021-05-03 19:22:16 -04:00
Andrew Tridgell
0be24c4946
Tools: convert old param files to new plane PID params
2021-04-15 06:57:16 +10:00
Randy Mackay
0a08793b7d
Tools: Holybro S500 param file
2021-03-04 14:27:20 +09:00
Rishabh
6e2339d2d6
Tools: default parameters for Hexsoon TD-650
2021-03-02 10:13:51 +09:00
Willian Galvani
e5844b7753
Frame_params: Sub: make RNGFND1_TYPE 0 (None)
...
This was causing issues in QGC 4.1 as it was showing an unhealthy
Rangefinder and marking the vehicle as "not ready to fly".
It will be up to the companion computer to set this to 10(Mavlink)
2021-02-11 10:43:50 -08:00
Randy Mackay
d02a61a65d
Tools: default parameters for hexsoon td860
2021-01-14 13:13:32 +09:00
Jacob Walser
e235c379bf
Frame_params: rename bluerov2 4.0 firmware defaults files
...
These files apply to 4.0.0...4.0.2, not only 4.0.2
2021-01-13 12:50:28 -05:00
Willian Galvani
9020c79677
Tools: Frame_params: Sub: fix parameter types
...
These files are consumed by QGroundControl. This means integers
should not have a decimal point.
2021-01-12 11:44:25 -08:00
Jacob Walser
c5ec0cfdee
Frame_params: (BlueRov2/Sub-3.5.1) revert to 19086e34
...
this file is targeted specifically at 3.5.1 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser
4c13a5ae4f
Frame_params: (BlueRov2 Heavy/Sub-3.5.2) revert to 9897ff60
...
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser
567c6d4991
Frame_params: (BlueRov2/Sub-3.5.2) revert to 83bb1e7f
...
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser
367e7b35de
Frame_params: add defaults for bluerov2 on Sub 3.5.4 firmware
2021-01-07 07:39:59 -08:00
Jacob Walser
3ce9d9eb44
Frame_params: add defaults for bluerov2 on Sub 4.0.2 firmware
2021-01-07 07:39:59 -08:00
Andrew Tridgell
dde940380f
Tools: update param files to not reference GND parameters
2020-12-08 13:22:17 +11:00
Tom Pittenger
2218f8292a
Tools: remove ADSB param that is already default
2020-11-30 16:05:17 +11:00
André
ce839cfef9
Frame_params: updated Disco startup location
2020-10-26 23:32:45 -07:00
Randy Mackay
4ac6a647d7
Tools: add boogie-board-boat frame params
2020-09-18 08:30:54 +09:00
Rishabh Singh
147ff6863a
Tools: Remove some parametes from Hexsoon EDU450 Frame
2020-07-01 18:13:24 +10:00
Randy Mackay
a9cc776c7d
Tools: update hexsoon edu450 recommended params
2020-02-20 19:28:24 +09:00
Matt Lawrence
beb9d0b761
Tools: Updating solo's parameters
2020-01-11 12:44:37 +09:00
Matt Lawrence
3f9e8f53ae
Frame_params: remove test files
...
Must have had these in the directory by accident in my last PR
2019-12-18 09:15:34 +09:00
Peter Barker
704407118b
Tools: use https:// scheme for ardupilot URLs
2019-12-10 07:53:46 +11:00
Matt Lawrence
b96a5d87b2
Frame_params: Solo notch filter params
...
Adds the dynamic harmonic notch filter and static notch filter to the Solo's default parameters. PID tuning parameters for the green cube Solo adjusted to take advantage of the better control.
2019-11-12 08:59:31 +08:00
Matt Lawrence
7a63bda027
Frame_params: Updated solo params for Copter 4
2019-11-08 07:28:17 +08:00
Andrew Tridgell
6c6a7cc675
Tools: removed old SkyViper-F412 defaults file
2019-09-12 14:02:36 +10:00
Randy Mackay
1edd1034f9
Tools: update for amovlab-p200 default params
2019-09-06 14:39:34 +09:00
Randy Mackay
a648e7e695
Tools: add default params for amovlab p200 reference frame
...
also minor update to hexsoon edu450 params
2019-09-06 12:02:24 +09:00
Randy Mackay
b40c20aea2
Tools: update hexsoon edu450 params
2019-09-03 15:27:52 +09:00
Randy Mackay
49b0d46612
Tools: param file for Hexsoon EDU450
2019-08-29 16:27:30 +09:00
Leonard Hall
fb790cadda
Tools: update parameter files after PID upgrade
2019-07-25 17:38:15 +09:00
Andrew Tridgell
ea212af2e5
Tools: added an example gpio.sh for the disco
...
trigger camera actions
2019-07-06 09:02:54 +10:00
Matt
ad2d7dac3e
Re-enable watchdog on Solo build targets
2019-06-23 09:00:32 +10:00