Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,256 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

491 Commits

Author SHA1 Message Date
Andrew Tridgell 46c91fa0c4 APM: added logging of DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell 82dd1cd7ce APM: added board_voltage() function 2012-03-02 15:48:27 +11:00
Pat Hickey 00180e7084 Cleanup: rename files with spaces in their names, replace with underscores 
* Skipped /Tools/ArdupilotMegaPlanner/Resources/new...
  and /archive/Configurator/Source/Utilities/TDMS/G...
  because I don't want to mess with that.
 2012-02-28 16:14:31 -08:00
rmackay9 630de04bd1 ArduPlane - updated to use new filter library 2012-02-28 21:03:04 +09:00
rmackay9 4501c488b4 ArduPlane - added Filter.h to unbreak the build! 2012-02-26 17:05:56 +09:00
rmackay9 6363da2829 ArduPlane - switch sonar to use new mode filter from filter library 2012-02-26 15:35:42 +09:00
Andrew Tridgell 3fe5b3151b allow MAG_ENABLE to be changed in flight 
this disables the compass in DCM if MAG_ENABLE is changed in
flight. Without this we would use a fixed yaw once the compass is
disabled

This also makes sure we don't pass the compass to DCM till we have
done a read. This ensures we have a good compass fix for the initial
DCM heading
 2012-02-25 14:51:09 +11:00
Andrew Tridgell 17718720b1 GCS: force scalar type in copy_name() 
this enables access to compass offsets over MAVLink
 2012-02-25 11:37:20 +11:00
Andrew Tridgell b231112957 DCM: renorm_sqrt_count is now called renorm_range_count 2012-02-23 08:16:08 +11:00
Andrew Tridgell 1fc24b506e AP_Param: update users of AP_Param for ParamToken 2012-02-19 17:05:28 +11:00
Andrew Tridgell b6fdf626e4 APM: expanded parameter area to match ACM 
this ensures waypoints and basic eeprom layout remain in sync
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 6b357fc66b AP_Param: fixed saving of sensor calibration 
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 8355823bc7 APM: use set_and_save_ifchanged() for GCS stream rates 
this avoids a lot of EEPROM scan operations when the groundstation
updates the stream rates
 2012-02-18 10:51:57 +11:00
Phil f8ed9f0e8d APM: Fix rudder in elevon mode. 
elevon planes can have rudders too
 2012-02-16 14:43:24 +11:00
Andrew Tridgell 2dcb594f4a APM: changed hold_course for landing to be based on yaw_sensor 
when we are in the final stages of a landing (less than 2 seconds from
landing waypoint, or less than 3m above landing altitude) we switch
the navigation to use a fixed course. The code previously used the
crosstrack_bearing for this, but this can lead to a large nav_roll in
this final stage of the approach, which can put a wing into the
runway. In autotest we were seeing a nav_roll value of -45 degrees as
we crossed the transition point for the landing, which often led to a
crash.

This changes the code to use the current yaw_sensor value instead,
which is much less likely to lead to large rolls in the final landing
stages.
 2012-02-15 08:50:45 +11:00
Andrew Tridgell c6b6320b43 APM: report the nav_bearing as hold_course when enabled 
this gives a more accurate view of the navigation code, as when
hold_course is not -1 it overrides nav_bearing
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 252a2d0c9b APM: added some comments related to hold_course 
hold_course is either -1 (for disabled) or a course to hold for
takeoff/landing. This makes the code a bit clearer.

It also resets hold_course in all non-auto modes, to ensure it isn't
used
 2012-02-15 08:50:45 +11:00
Andrew Tridgell c93dedc955 when setting airspeed and groundspeed in a mission, don't save to EEPROM 
If you include airspeed, throttle or groundspeed changes in a mission
then those should not be saved to EEPROM, as otherwise if you restart
and re-fly the mission you will be starting with different parameters
to the ones you used for the first flight.

This is particularly important for setting the target airspeed when
coming in for a landing. You typically set a low target, but if you
fly again the next day I think it would be a real surprise to find
that your loiter airspeed has then changed to the value from the
landing part of your last mission.

This one can be argued either way, but I think that not saving these
changes is the more conservative choice, and better fits the
'principal of least surprise'
 2012-02-14 15:20:44 +11:00
Andrew Tridgell df2ef6ff47 APM: fixed some build warnings 2012-02-14 08:58:56 +11:00
Andrew Tridgell 3907cf81f8 Mavlink: report the corrected pitch via MAVLink 
this subtracts the TRIM_PITCH_CD from the pitch reported via
MAVLink. That gives a better indication of the true pitch in the tlog
 2012-02-14 08:58:56 +11:00
Andrew Tridgell da16ccf993 fixed some printf casts 2012-02-14 08:34:10 +11:00
Andrew Tridgell c6f3f7065c APM: the CLI fits nicely on the 1280 again now 
I find the CLI very useful for testing, so enable it by default on the
1280. Logging is still off by default.
 2012-02-14 08:33:49 +11:00
Andrew Tridgell 153575a01c token is 16 bits now 2012-02-13 16:22:53 +11:00
Andrew Tridgell 16a5b5c3ee added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 781617cae0 token size for first()/next() is now 16 bits 2012-02-13 16:22:52 +11:00
Andrew Tridgell 50f9d12ad5 go back to 1024 bytes for variables in EEPROM 2012-02-13 16:22:52 +11:00
Andrew Tridgell f5f6e2d4ec added group indexes to GCS_MAVLINK class 2012-02-13 16:22:52 +11:00
Andrew Tridgell a8140d9524 expand parameter area for ArduPlane 
this ensures all parameters can be saved without overflow
 2012-02-13 16:22:52 +11:00
Andrew Tridgell bbc876fcdf tidy up a comment 2012-02-13 16:22:52 +11:00
Andrew Tridgell 9fe8c079e7 fixed two parameter names 2012-02-13 16:22:51 +11:00
Andrew Tridgell 922139b824 expose mavlink stream rates as parameters 2012-02-13 16:22:51 +11:00
Andrew Tridgell edfb8fe0b7 imported new Parameters code to APM 2012-02-13 16:22:51 +11:00
Andrew Tridgell c4bd17052e import new Parameters.h for AP_Param to APM 2012-02-13 16:22:51 +11:00
Andrew Tridgell ab057d9801 implement dump of all vars in CLI using AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell faa098b2b6 adapt mainline APM code to AP_Param 2012-02-13 16:22:51 +11:00
Sandro Benigno 3932e8b2a1 Battery monitor type 3 cannot calculate battery remaining properly, due it uses only voltage reading. This path set battery_remaining to a value out-of-band for that type of monitoring. It informs to external devices to not show that info. 2012-02-11 21:01:13 -02:00
Andrew Tridgell c95a295fd6 allow for lower serial baud rates 
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
 2012-02-04 19:07:18 +11:00
Pat Hickey 5cdee95516 ArduPlane: Call APM_RC.enable_out for all channels in init_rc_out. 2012-01-22 12:03:11 -08:00
Michael Oborne e71266c258 change rc norm_output to scale evenly across the entire range 2012-01-20 16:24:55 +08:00
Michael Oborne 9dafc668cd fix SITL attitude hil 2012-01-20 16:04:49 +08:00
analoguedevices 40f37c1037 Increment version number in anticipation of a firmware hex push. 2012-01-16 22:48:46 +00:00
Doug Weibel 78ac65d6c3 Additional commenting on global variables 
First pass done.
 2012-01-16 10:28:03 -07:00
Doug Weibel a3f9fee3d2 Additional commenting on global variables 2012-01-16 09:45:42 -07:00
Doug Weibel 2ea9db84e0 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Doug Weibel 82338f2571 Remove a debugging print 2012-01-15 16:37:07 -07:00
Doug Weibel 3b2196354f Stashing some battery monitoring ratio values in the comments for future use. 2012-01-15 16:35:46 -07:00
Doug Weibel e109992c12 Add a CLI setup action to reset the magnetometer offsets 
Since the magnetometer offsets are not available through the MAVLink parameter interface (since they are an AP_Var vector) this little feature allows them to be reset from the CLI.  Useful if you somehow get bad offsets or if you change magnetometer.  If you have a bad set of large offset values I have seen issues with the nulling algorithm have trouble converging to the proper values.  I have never seen it have trouble converging from 0/0/0, so this could be a useful feature from time to time.
 2012-01-15 16:15:08 -07:00
Doug Weibel 17b31d0b5b Fix airspeed sensor support for APM2. 
Airspeed sensor should be attached to Analog input 0
 2012-01-15 16:12:08 -07:00
Doug Weibel 17b3e514dc Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Doug Weibel fd8dc84fac Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Doug Weibel 622217357c Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
Doug Weibel 6f9c6a3b8e Adding comments for global variables 2012-01-11 12:37:43 -07:00
analoguedevices 47197891e3 Put in commented-out APM2 # defines, to save people the trouble of having to type them in themselves. 2012-01-09 02:00:46 +00:00
Doug Weibel 0fb4082581 Bug fix for issue 438. 
The rate in a change alt command does not need to be signed.  The code will determine if the rate needs to be positive or negative
 2012-01-08 18:24:55 -07:00
Michael Oborne 5d5800ee1f fix relay on apm 1 AP 2012-01-05 07:51:01 +08:00
Andrew Tridgell 645eac6f38 I2c: default to 5ms timeout, and faster bus speed 
we will slow down the speed when we get a failure
 2012-01-04 16:36:47 +11:00
Doug Weibel 35fba5d4a3 Tweak to FBW min altitude 
Patch from Yury
 2011-12-31 15:44:40 -07:00
Jason Short bc7f0a567c Small issue with newline formatting 2011-12-29 23:02:02 -08:00
Michael Oborne 0c75c863de add circle to output modes 2011-12-29 18:21:32 +08:00
Andrew Tridgell 5aca951438 APM: added error checking on barometer read 
if the barometer is dead and the GPS has a fix, use the GPS for
altitude
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 2c41264a9b APM: added error checking on compass read 2011-12-28 20:41:53 +11:00
Andrew Tridgell c6b8a08918 APM: convert to new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell c91827ee09 geofence: re-breach if user changes mode outside the fence 
if the user changes mode while outside the fence, and fencing is still
enabled, then declare a new breach
 2011-12-28 17:28:35 +11:00
Andrew Tridgell b108b907e0 APM: Update for DataFlash changes 2011-12-28 16:00:49 +11:00
analoguedevices fefda548d2 Added contributor names, removed "alpha" from firmware name 2011-12-26 17:13:37 +00:00
Andrew Tridgell 4cd4987ae7 APM: fixed some unsigned/signed warnings 2011-12-26 19:17:11 +11:00
Andrew Tridgell d09c344ab8 APM-log: fixed reading of GPS logs 2011-12-26 19:17:11 +11:00
Andrew Tridgell 94cbbf6f28 APM-log: changed to use df_NumPages 
this copes with different data flash sizes on APM1 and APM2
 2011-12-26 19:17:11 +11:00
Doug Weibel 7779dff355 Correct a bug in throttle failsafe feature 2011-12-24 15:34:31 -07:00
Doug Weibel c40093a1a7 Remove old debug print 2011-12-24 14:26:35 -07:00
Doug Weibel 4009018167 Fix scaling on "turn coordination" yaw PID so that P gain values fall in "usual" range 0.1 to 10. 2011-12-24 14:26:35 -07:00
Andrew Tridgell 66029af574 setup the main loop failsafe after RC library is setup 2011-12-23 11:13:01 +11:00
Andrew Tridgell f7dda9f413 added comment on using GPS ground course 2011-12-23 11:13:01 +11:00
Andrew Tridgell 968ad78df0 APM2: default magnetometer to enabled 
all APM2s have a MAG at the moment

thanks to Chris for the suggestion
 2011-12-22 17:51:14 +11:00
Andrew Tridgell ef3c5c071a failsafe: make sure we clear any RC override in manual failsafe 2011-12-22 10:55:43 +11:00
Andrew Tridgell c6633d7bc9 fixed HIL build 2011-12-21 23:31:39 +11:00
Andrew Tridgell ad63c10ab7 APM: added failsafe support 
we now pass all channels through at 50Hz if the main loop stops
running, regardless of why. This gives us a reasonable failsafe, as
long as the low level RC library is still working, and interrupts
don't get completely disabled.
 2011-12-21 23:31:39 +11:00
Andrew Tridgell 0aab4da1a1 mainloop_count should be uint16_t 2011-12-21 23:31:38 +11:00
Andrew Tridgell 61b2b2e32a always declare a timer_scheduler 
we should always run this code
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 73146bae5d APM: show temperature in airpressure test 
useful for tracking down baro bugs
 2011-12-19 18:52:56 +11:00
Andrew Tridgell 98406e842b geofence: send fence status messages on fence events 
this ensures the fence status goes out as soon as possible, which
means the messages arrive in a sane order on the GCS
 2011-12-19 11:25:59 +11:00
Andrew Tridgell 226470c614 APM: added RST_SWITCH_CH parameter 
This is useful for switching back to the mode indicated by the control
switch after a failsafe or fence breach. I was just changing modes
each time, but it is far more elegant to have a spring loaded switch
for "I am ready to take control again", rather than continually
changing modes.
 2011-12-19 11:25:59 +11:00
Andrew Tridgell 54b8aab0ac Log: fixed logging dependence on compiler arg eval order 2011-12-18 17:31:45 +11:00
Andrew Tridgell 8a7d064842 APM: run mavlink loop while erasing logs 2011-12-18 10:19:52 +11:00
Andrew Tridgell ce035fc324 geofence: enable return to old control mode via FENCE_CHANNEL 
if you disable fencing with the fence channel switch while still in
GUIDED mode to the return point, then reset the control mode back to
the transmitter control mode
 2011-12-18 10:00:44 +11:00
Andrew Tridgell 5d2301ef47 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 4bbd5392ef removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Andrew Tridgell ed17f64459 geofence: added FENCE_TRIGGERED_PIN 
this allows for a digital pin to be set high when the geofence
triggers. This pin can be connected to an external failsafe device
 2011-12-17 07:29:08 +11:00
Michael Oborne eed0eea13b apm 1280 disables 2011-12-16 22:26:39 +08:00
Andrew Tridgell 1ab2b416a3 geofence: store fence points as int32_t 
this keeps maximum precision in fence boundaries
 2011-12-16 20:11:51 +11:00
Andrew Tridgell b3327c64de geofence: added fence status reporting and faster altitude check 2011-12-16 20:11:51 +11:00
Andrew Tridgell a6e451c1b2 geofence: don't trim control surfaces on geo-fence breach 
the user input is likely to be bad
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 1b64185b18 geofence: main geo-fence code 
this implements the primary logic of geo-fencing
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 238c25c05e geofence: added geo-fencing control parameters 2011-12-16 20:11:51 +11:00
Andrew Tridgell 1455ff4a91 removed an unused variable 2011-12-16 20:09:49 +11:00
Andrew Tridgell e1e9002fad only check for "enter 3 times" in first 20s after boot 
we don't want stray bytes on serial3 to make us enter the CLI during
flight!
 2011-12-16 20:09:32 +11:00
Doug Weibel a77f91fa4e Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Andrew Tridgell e8617fc929 DCM: reset the DCM matrix after a ground start 2011-12-13 21:33:07 +11:00
Andrew Tridgell b0aa1deac2 MAVLink: fixed link flood on waypoint upload 2011-12-13 20:39:04 +11:00
Andrew Tridgell d416013bd8 fixed a hang on 2nd run of IMU test 
we should not try to initialise the ISR handlers twice
 2011-12-13 18:28:50 +11:00
Andrew Tridgell c007fb49b8 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 4e4a4a685c fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Andrew Tridgell dd4498d113 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Andrew Tridgell 80a0dfe862 fixed hardware config check for barometer 2011-12-12 15:14:55 +11:00
Andrew Tridgell 65ed8cc2c3 added sitl build target 2011-12-12 15:14:55 +11:00
Andrew Tridgell 4319d1ceb0 throttle: only use throttle slew in auto throttle modes 
we don't want STABILISE and FBWA to have throttle change limits
 2011-12-12 15:14:55 +11:00
Andrew Tridgell fa683c5718 airspeed: smooth the airspeed value a bit more 
the value is very noisy in my tests. A bit more smoothing may help
 2011-12-12 15:14:55 +11:00
Andrew Tridgell faf58a355b airspeed: use floating point values and better averaging in zero_airspeed() 
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
 2011-12-12 15:14:55 +11:00
Andrew Tridgell bb861117a3 apm2: fixed for new barometer code 2011-12-11 15:21:10 -08:00
Pat Hickey 85b82e75f6 ArduPlane: update AP_Baro construtors and initializers 2011-12-11 15:21:10 -08:00
Pat Hickey 6710cf5c5a Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey 5fd8fea957 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define 
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
 2011-12-11 15:21:09 -08:00
Pat Hickey 6f27c4c779 ArduPlane: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey 63d3b6a278 ArduPlane: Rename APM_BMP085 classes to AP_Baro_BMP085 classes 2011-12-11 15:21:09 -08:00
Pat Hickey c64e3f5772 ArduPlane: calibrate accel with imu.init_accel after imu.init 
* complements commit 73418559, where init_accel was eliminated
  from AP_IMU_INS::init cold start.
 2011-12-10 13:32:47 -08:00
Doug Weibel f34333d42b Minimum ground speed patch from Claudio Natoli. Thanks Claudio! 
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
 2011-12-09 16:43:25 -07:00
Doug Weibel 77a7734111 Augment failsafe gcs_send_text message 2011-12-09 09:11:45 -07:00
Doug Weibel 4f6f9a6be4 Add hook to dump log filesystem index for debugging 2011-12-07 08:13:30 -07:00
Andrew Tridgell c1569e49a8 fixed the "reboot on GPS lock" bug 
the problem was that with APM2 we may not have a 2nd GCS instance. The
"gps alt: xxx" message was being unconditionally sent to both GCS
instances, which caused a crash
 2011-12-04 09:06:58 +11:00
Andrew Tridgell 899c1364cc test: removed the broken gyro test and merge it into the imu test 
the gyro test assumed APM1 hardware, and would hang on APM2. The imu
test can just as easily display gyro and accelerometer data as well as
roll/pitch/yaw, so combine it in one test
 2011-12-03 14:08:20 +11:00
Doug Weibel b3b218fa40 Fix for intermittent bug of log #1 starting on page 2 and confusing file system 2011-11-28 19:43:10 -07:00
Doug Weibel aa6c336479 Add DataFlash.Init before doing a forced log erase on eeprom reset. 
Add progress indication during log erase
 2011-11-28 19:42:27 -07:00
Andrew Tridgell 7f4c87eeec mavlink: don't force CLI and HIL with mavlink10 build 2011-11-28 16:22:33 +11:00
Andrew Tridgell e61d945874 mavlink: paranoia setting of failsafe when forcing AUTO mode 
this shouldn't be needed, but will do no harm, and I thought I saw
this fail in a test
 2011-11-28 16:22:33 +11:00
Andrew Tridgell 833f5f5895 mavlink: move Mavlink_compat.h to common code 
this will allow it to be used by ArduCopter
 2011-11-28 13:53:57 +11:00
Andrew Tridgell d295b7d76c build: CLI_SLIDER_ENABLED doesn't need to be forced off in apm2 build 
this is handled by config.h now
 2011-11-28 13:53:57 +11:00
Doug Weibel ca5560ef1c Add Guided mode to failsafe handling 2011-11-26 21:10:53 -07:00
Andrew Tridgell fb21e619fe Logs: don't print hundreds of bogus log boundaries 
this can take quite a long time
 2011-11-26 17:02:55 +11:00
Pat Hickey 0fa8ce9a52 ArduPlane: rev version number from 2.26 to 2.27 Alpha 2011-11-25 20:00:19 -08:00
Pat Hickey a6bf2d9cd6 ArduPlane: LED digital writes use LED_OFF and LED_ON 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7467bf649c ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 0604f2c667 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 2bed1dcfd5 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Andrew Tridgell c8b592f8a7 purple: there are no dipswitches on the purple board 2011-11-25 20:00:18 -08:00
Andrew Tridgell 67e5c89226 compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell b6bab1d92d purple: adc test not useful if no ADC 2011-11-25 20:00:18 -08:00
Andrew Tridgell 6c856dde4e purple: fixed LED and IO pin defintitions 2011-11-25 20:00:18 -08:00
Andrew Tridgell 2db5a2b5e2 purple: add the remaining hw defines for purple hardware 2011-11-25 20:00:18 -08:00
Andrew Tridgell 01cfd64327 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell 0d3e07c2f7 build: added hlsensors target 2011-11-25 20:00:18 -08:00
Andrew Tridgell 446a9aac84 re-organiser sensor declarations 
this tries to make the #ifdef nesting easier to understand
 2011-11-25 20:00:17 -08:00
Andrew Tridgell ee3254ef8f adc.Init() takes timer_scheduler 2011-11-25 20:00:17 -08:00
Andrew Tridgell 992fc87112 purple: always declare timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey c93d7a9560 purple: added new parameters to Init() functions 
this adapts the test code for the purple API changes
 2011-11-25 20:00:17 -08:00
Pat Hickey ed74d1c987 test: added new passthru test 
this passes radio inputs direct to servo outputs, which is useful for
hardware testing
 2011-11-25 20:00:17 -08:00
Pat Hickey 71ebf1f543 removed old commented out code 2011-11-25 20:00:17 -08:00
Pat Hickey fefc7da1d1 purple: added new parameters needed for new library APIs 
new APIs pass in timer_scheduler. We also to init the isr_registry
 2011-11-25 20:00:17 -08:00
Pat Hickey 5626f4a127 purple: fixed APM_RC.Init() to add isr_registry parameter 2011-11-25 20:00:17 -08:00
Pat Hickey d3a45a053d purple: declare sensors for purple library rework 
we need some different declarations to match the new APIs
 2011-11-25 20:00:17 -08:00
Pat Hickey d5ebf30d74 purple: added config options for purple/APM1 hardware 2011-11-25 20:00:17 -08:00
Pat Hickey f580a4bea0 purple: added hardware defines for ArduPlane 2011-11-25 20:00:17 -08:00
Pat Hickey 395f43bee8 build: added new command line build targets 
this makes it more convenient to build common options
 2011-11-25 20:00:16 -08:00
Andrew Tridgell 32073eaa51 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Michael Oborne f66a6b4308 Add rc input to cli planner mode 2011-11-26 11:23:14 +08:00
Doug Weibel 516216f159 Change type to support "dump all with -1" 2011-11-24 18:55:33 -07:00
Doug Weibel 4a07bb3127 Logging cleanup. Fixed missing cast, removed erase warning, added -1 to dump all option, and fix intermittent bug for log number 1. 2011-11-24 18:55:33 -07:00
Doug Weibel 06c88cf07b Simplified logging logic for finding start/end of log files 2011-11-24 18:55:32 -07:00
Doug Weibel e02d615c8a Rework logging file system to be more robust 2011-11-22 20:20:17 -07:00
Andrew Tridgell a69b4c2d7e MAVLink: fixed throttle display in VFR_HUD 2011-11-21 20:29:19 +11:00
Andrew Tridgell 2cc0cd65b4 zero airspeed on ground start when initiated by MAVLink 
If the users asks for a new calibration, that should include the
airspeed sensor
 2011-11-21 20:29:18 +11:00
Andrew Tridgell 2137e91ede fixed disabling of GPS in ArduPlane 
we may need a new hex
 2011-11-21 20:29:18 +11:00
Andrew Tridgell d9f32ce5b8 Log: prevent looping forever 
this happened with an empty dataflash
 2011-11-20 19:06:24 +11:00
analoguedevices 1a610ba450 Rev version number 2011-11-19 23:43:47 +00:00
Jason Short 014204409a shortened strings 2011-11-19 14:02:45 -08:00
Doug Weibel 0bc31fa236 Remaining changes to the logging file system. 
With these changes the logging system will allow overwriting of logs with no loss of functionality.  I have tested (successfully) logging with the Dataflash being filled and overwriting previous files.  I have also tested with a single long file that partially overwrites itself.
 2011-11-17 21:25:51 -07:00
Doug Weibel a11ea12ca8 Change to logging file system. 
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
 2011-11-17 21:25:51 -07:00
Jason Short fc3e7767ba Mission Scripting updates 2011-11-16 00:22:23 -08:00
analoguedevices fa4896ee91 Rev version number 2011-11-16 05:04:36 +00:00
Doug Weibel 1c6469d25b Fix Do_Jump bug. Also fix cross track bearing bug after Jump 2011-11-15 20:44:19 -07:00
Doug Weibel b23dd36f6d Missed hunk for last commit 2011-11-15 20:43:00 -07:00
Doug Weibel b7494774f7 Add logging of DCM drift correction integrator in PM 
This may be a temporary feature…  Mostly added to check new (lower) integrator limit.
 2011-11-15 20:42:59 -07:00
analoguedevices b4ccf3b41b Rev version number to 2.25 2011-11-14 05:31:27 +00:00
Michael Oborne 0a2f67a235 modify crosstrack calc 2011-11-13 08:25:24 +08:00
Andrew Tridgell 49053a9721 fixed a valgrind warning 
need to initialise all fields
 2011-11-08 17:26:53 +11:00
Andrew Tridgell a045e4ec7e Log: better way to check for -1 long portably 2011-11-08 07:58:34 +11:00
Andrew Tridgell 4113d04f70 Log: make find_last_log_page() portable 
this makes it work with platforms with a larger 'long'
 2011-11-07 23:50:49 +11:00
Andrew Tridgell 0775f57a89 Log: fixed a bug where we could index outside an array 
when we first start up, num_existing_logs may be zero
 2011-11-07 22:56:13 +11:00
Jason Short 80c7e135d5 renamed some command variables to align with Arduplane 
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
 2011-11-04 21:41:51 -07:00
Amilcar Lucas 01df18b292 Added camera and/or antenna mount support. 
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
 2011-10-31 22:55:58 +01:00
Andrew Tridgell ac4c604a6b GCS: fixed timeout loading waypoints 
while loading waypoints we could saturate the link
 2011-10-31 21:25:35 +11:00
James Goppert 663ed536c4 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-30 23:12:53 -04:00
James Goppert 249ce91d78 Switching to new eclipse project style. 2011-10-30 22:57:34 -04:00
Michael Oborne 193940f2e2 Revert Changes 
switch back to old nav_rol lcalc
switch back to old planner - non mavlink 1.0
 2011-10-31 07:23:20 +08:00
Michael Oborne 95479e29ae Add MAVLINK_MSG_ID_HIL_STATE message 2011-10-30 18:17:37 +08:00
Michael Oborne 6d2be49304 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-30 14:27:13 +08:00
Andrew Tridgell e6f7bf9df8 MAVLink: use new MAV_MODE_FLAG_CUSTOM_MODE_ENABLED flag 
this enables us to tell if custom_mode is set
 2011-10-30 13:00:54 +11:00
Andrew Tridgell 3f7d46b17e fixed uninitialised variable warning 2011-10-30 11:48:56 +11:00
Andrew Tridgell c914b11504 use C++ tricks to minimise differences for MAVLink 1.0 
this should make maintainence/testing a bit easier
 2011-10-30 11:48:56 +11:00
Michael Oborne 0707198bd5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-30 07:35:10 +08:00
James Goppert b655482b98 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-29 15:09:35 -04:00
James Goppert c56c3e33e1 Working on cmake support. 2011-10-29 15:01:05 -04:00
Andrew Tridgell 3991f9eff3 move g_rc_function[] to RC_Channel library 
libraries should not rely on data declared in the main program. This
caused a build error for the Desktop build for ArduCopter under cygwin
 2011-10-29 18:42:18 +11:00
Michael Oborne 63c884a6df better crosstrack 2011-10-29 12:54:13 +08:00
Michael Oborne abed7fa5f2 Merge branch 'master' of https://code.google.com/r/meee146-hil 2011-10-29 11:37:54 +08:00
Andrew Tridgell 4a92048ef0 fixed "Free RAM" display on bootup 2011-10-28 21:34:10 +11:00
Michael Oborne 357f299d61 APM track following change 2011-10-28 12:05:22 +08:00
Doug Weibel c7d91a199c Bug fixes for command logic re-write 2011-10-27 13:45:57 -06:00
Doug Weibel 1cd3c21774 Initial rewrite of command logic. 
Changes mission structure so that conditional and immediate commands are located between associated waypoints instead of after the second waypoint.
 2011-10-27 13:45:52 -06:00
Andrew Tridgell c0c771042f CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Andrew Tridgell 6cd604e510 mavlink: fixed WP upload 
The previous code accepted arbitrary command codes here, and ACKed
them. Later we should specifically list which ones are OK
 2011-10-26 12:18:24 +11:00
Andrew Tridgell d18071d6c2 MAVLink: MAVLink 1.0 support now builds 
not testing at all - so be careful!
 2011-10-24 12:21:26 +11:00
Andrew Tridgell 2c4c00ece8 mavlink: started adding support for MAVLink 1.0 
this is nowhere near complete, and does not compile yet
 2011-10-24 10:20:36 +11:00
Doug Weibel 86ea3a9558 Add a feature for a minimum altitude parameter while flying in FBW-B 
This patch written by YureZzZ - Thank you!
 2011-10-16 23:11:40 -06:00
Michael Oborne 6987e6c4b2 hil sensor cleanup 2011-10-14 18:14:32 +08:00
Michael Oborne 392160314e Sensor hil fix's 2011-10-13 22:22:03 +08:00
Andrew Tridgell 52dc221969 support building with common Makefile.desktop 2011-10-11 17:49:40 +11:00
Michael Oborne ec7fa70fd6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-11 08:05:14 +08:00
Michael Oborne a28a0f9433 Merge branch 'desktop-wip' of https://code.google.com/r/tridge60-apm-wip 2011-10-10 07:22:57 +08:00
Andrew Tridgell ed2bec75b9 added build makefiles 2011-10-10 07:18:38 +11:00
Amilcar Lucas ea27d1604a More optimizations 
I forgot these ones.
 2011-10-09 15:34:47 +02:00
Amilcar Lucas 282722eae6 Optimize the code a bit more, only perform calculations if they are necessary 2011-10-09 15:27:17 +02:00
Amilcar Lucas 02f023a9ec Use a single if instead of four 2011-10-09 15:27:17 +02:00
Amilcar Lucas 758ae5a78e Use the shorter macro call instead 2011-10-09 13:57:35 +02:00
Andrew Tridgell 2cb93f5a16 fixed a crash in HIL 
The g_rc_function[RC_Channel_aux::k_flap_auto] ptr came out as NULL
during one HIL run on a desktop CPU, which led to ArduPlane
crashing. I am not yet sure if this can happen in real flight, but I
think the NULL check is worthwhile to be sure.
 2011-10-09 22:09:00 +11:00
Andrew Tridgell 1195c4750e fixed some ambiguous if/else combinations 
gcc was complaining about the logic
 2011-10-09 22:09:00 +11:00
Andrew Tridgell dcc6f30af1 don't initialise DataFlash if logging is disabled 
this fixes HIL without an IMU
 2011-10-09 22:08:59 +11:00
Andrew Tridgell e927cf94d7 use memcheck_available_memory() instead of freeRAM() 
this gives a more accurate view of free memory
 2011-10-09 22:08:59 +11:00
Andrew Tridgell 657367426b avoid the need for compiler optimisation for HIL build 
read_airspeed() is only available when in a non-HIL build. The
optimiser normally removes this call, but when debugging in a desktop
build, it is nice to avoid using the optimiser
 2011-10-09 22:08:58 +11:00
Amilcar Lucas 6a5d6889b7 Only use radio_in values if the channel is not used as flight_mode_channel 2011-10-08 22:15:54 +02:00
Amilcar Lucas 101dc83239 Fix compilation 2011-10-02 14:52:02 +02:00
Amilcar Lucas 4b35757a1e Moved relay control functions to it's own library 2011-10-02 01:00:27 +02:00
Amilcar Lucas 213e731061 Correct/update channel assigment comment 2011-10-02 00:06:44 +02:00
Doug Weibel dd8367eae4 Add auto flap functionality to FBW-B 2011-09-30 07:25:36 -06:00
Doug Weibel 8f2ae139a4 Fix missing capitalization 2011-09-30 07:25:35 -06:00
Doug Weibel b6cd0ad9b8 Rework prev commit a bit cleaner as suggested by Janne Mäntyharju 2011-09-30 07:25:35 -06:00
Doug Weibel aac8eac0cb Add code to disable throttle if we are on the ground and in FBW_B or higher 
Add code to disable throttle if we are on the ground and in FBW_B or higher.  We believe we are on the ground if speed < 5 and alt < 5.  Also check that we are not trying to perform a takeoff.
 2011-09-30 07:25:35 -06:00
James Goppert 204c6bb6e7 Added makefiles for ArduCopter/ArduPlane. 
These files are not generated by cmake. They are necessary for
the make based build to work. To build using this method
type make in the directoy such as ArudPlane/ArduCopter. Make
sure that you do not call cmake in the ArduPlane etc directory
as this will overwrite this Makefile with the autogenerated cmake
version. Cmake should be called from withing a build directory.
 2011-09-30 07:16:48 -04:00
Janne M cd02e78af7 Fixed board setting in cmake-file. Removed now autogenerated Makefile 2011-09-30 11:17:08 +03:00
James Goppert 112d5e9531 Improvements to cmake. 2011-09-29 21:23:26 -04:00
James Goppert bfe0331803 Corrected makefile. 2011-09-29 18:57:19 -04:00
James Goppert a0db0fc25f Added missing files. 2011-09-29 14:18:05 -04:00
James Goppert 3a00ceb593 Added ArduBoat/ ArduRover/ and APO library. 2011-09-29 14:12:15 -04:00
Jason Short 1243e76f29 Dead Zone fix - Now the range is full instead of clipped. Should make the Yaw much more smooth. 2011-09-26 22:12:39 -07:00
Amilcar Lucas cd0bbd718b Fix issue #285 2011-09-25 11:36:31 +02:00
Amilcar Lucas a3152b2410 Moved mavlink_check_target() to the libraries/. 
This allows it to be reused by the other libraries and by other projects ArduPlane, ArduCopter, ArduRover ... etc.
It also reduces code duplication
 2011-09-24 14:40:07 +02:00
Doug Weibel 5767575a73 Correct bug in auto flap handling 2011-09-22 20:50:15 -06:00
Andrew Tridgell c5bf8312b8 removed some more unused defines 
mavlink is now the only choice for HIL and GCS
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 3a81e12866 get rid of the last active uses of the SendDebug macros 
please use gcs_send_text*() from now on, to ensure serial queueing
 2011-09-19 11:04:02 +10:00
Andrew Tridgell e7bc74a38e remove unused climb_rate code 2011-09-19 11:04:02 +10:00
Andrew Tridgell c2126e127d use gcs_send_text_fmt() and cleanup a few old debug lines 2011-09-19 11:04:02 +10:00
Andrew Tridgell 943c234c62 GCS: added new gcs_send_text_fmt() method 
this allows low priorty formatted messages to be sent to the ground
station, without causing a CPU stall on the serial send buffer
 2011-09-19 11:04:02 +10:00
Andrew Tridgell f71674ffa4 GCS: don't send low priority messages unless they fit 
check the serial transmit buffer, and don't send low priority messages
unless they can go straight out without blocking the CPU
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 8f604a1035 added gcs_severity enum 
this makes it harder to mixup defines
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 4e346a0cc5 remove some more old cruft 2011-09-19 11:04:02 +10:00
Andrew Tridgell 225e6d760f remove Mavlink_Common.h and used deferred logic for params/waypoints 
this moves the mavlink send logic into GCS_Mavlink.pde, and also
ensures we only ever send parameters and waypoints when there is
sufficient space in the serial send buffer
 2011-09-19 11:04:02 +10:00
Andrew Tridgell ef6e2c2adf remove some more unused code in the GCS interface 2011-09-19 11:04:02 +10:00
Andrew Tridgell de18df06b5 GCS: make the two GCS links gcs0 and gcs3 
the artifical separation between 'gcs' and 'hil' just leads to
confusion. This also simplifies the code a bit more, and saves us a
bit more text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 35fcd6dae7 GCS: simplify the API for sending messages 
this makes the code clearer, and saves us another 100 bytes of text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 83492f92f2 MAVLink: use enum ap_message and remove unused param argument 
saves us another 200 bytes of text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 9fed709be2 removed some more dead messages, and convert MSG_* to an enum 
this make it safer to add a new message while keeping deferred queue
the right size
 2011-09-19 11:04:02 +10:00