Michael Oborne
9ea7be9c9c
APM Planner 1.1.53
...
add sensor rate telem
save autopan between sessions
modify connect hb requirement and param timeout
2012-03-18 10:29:55 +08:00
Michael Oborne
91054916c3
firmware build
2012-03-18 09:18:32 +08:00
Michael Oborne
3f62427619
firmware build
2012-03-18 09:13:49 +08:00
John Arne Birkeland
844e1c9695
ArduPPM V2.2.66
...
- Added APM2 (ATmega32U2) support for using TX and RX status leds to indicate PWM and PPM traffic
<RX><OFF> no pwm input detected
<RX><TOGGLE> speed of toggle indicate how many channels are active
<RX><ON> input lost (failsafe)
<TX><OFF> ppm output not started
<TX><FAST TOGGLE> normal PWM->PPM output or PPM passtrough failsafe
<TX><SLOW TOGGLE> PPM passtrough
2012-03-16 20:48:55 +01:00
Michael Oborne
bd294b3371
APM Planner 1.1.52
...
add mag field strength - status tab "magfield"
modify param getting.
mag calibrate error checking
hazys - capm mod
2012-03-15 07:10:31 +08:00
Hazy
39e825bb04
APM Planner
...
fix detection of CAPM board
2012-03-13 20:26:45 +08:00
Chris Anderson
59957e0c84
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-03-12 22:04:32 -07:00
Michael Oborne
10da3db15c
APM Planner 1.1.51
...
revert posible camera issue
fix apc220 units rts issue
fix bluetooth comport issue - re andrew
cleanup startup test
2012-03-13 07:15:08 +08:00
Andrew Tridgell
accc5dc02f
autotest: run fg viewers with less CPU priority
2012-03-10 10:34:27 +11:00
Andrew Tridgell
5e66d3cecb
autotest: added CMAC test circuit
...
this is what I am using for noise testing
2012-03-10 10:34:27 +11:00
Michael Oborne
986f1675ad
APM Planner 1.1.50
...
rename messagebox to custommessagebox
mag calibration now working. > hardware setup tab
2012-03-09 23:18:12 +08:00
Michael Oborne
f1d67c5638
APM Planner
...
Fix Updater
2012-03-07 08:01:59 +08:00
Michael Oborne
7f47640b92
APM Planner 1.1.49
...
mode TUNE_ param scale
add mavlink tlog graphing
mod tracker options
2012-03-06 18:27:43 +08:00
Michael Oborne
444f29410b
planner cleanup
2012-03-04 08:49:45 +08:00
Michael Oborne
ba3ffb3b8b
APM Planner 1.1.48
...
Add ThemeManager - re andrew
Add CustomMessageBox - re andrew and me
few mono fixs
mono tts working (speech)
2012-03-04 08:42:42 +08:00
Michael Oborne
0087d0533a
APM Planner 1.1.47
...
fix Updater
2012-03-03 15:42:41 +08:00
Chris Anderson
2b48a557ec
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-03-02 21:26:46 -08:00
Michael Oborne
c2fa44d24e
APM Planner 1.1.46
...
update to request extra3 stream.
2012-03-02 18:40:20 +08:00
Michael Oborne
ee5e331f3c
APM Planner 1.1.45
...
add tcp and udp port remeber issue 533
add udp listern wait issue 534
fix wp receive on mono part issue 530
allow logging of unknown packets mav 0.9
do_speed_change fix issue 531
remember last video res issue 521
fix issue 528 - ch 6 and ch 7 options
2012-03-01 21:27:03 +08:00
Michael Oborne
a5e3f8d324
APM Planner 1.1.44
...
mod antenna tracker code
add extra ch 6 options
cleanup message dialogs better
fix auto fill ch6 and ch7 mode options
add progress to upload and dl wp's
fix disconnect bug on mono
2012-02-29 21:19:54 +08:00
Pat Hickey
ff0fc26484
Cleanup: rename files with spaces in their names, replace with underscores
...
* Skipped /Tools/ArdupilotMegaPlanner/Resources/new...
and /archive/Configurator/Source/Utilities/TDMS/G...
because I don't want to mess with that.
2012-02-28 16:14:31 -08:00
Michael Oborne
57ed9fc62b
APM Planner 1.1.43
...
Add logging system - re andrew radford
move libs
add tlog support to georef images.
experimental antenna tracking - pololu maestro
tweak "follow me" mode, better error checking
update dataflashlog format for ac2
lang change mod - re hazy
remove arduinocpp project
2012-02-27 07:13:23 +08:00
Hazy
71b73a669c
APM Planner
...
fix CAPM update firmware error
2012-02-26 19:14:08 +08:00
Andrew Tridgell
9d6ac9032e
test: updated VARTest for new AP_Param vector3f handling
2012-02-25 11:37:20 +11:00
Andrew Tridgell
57971e0ddf
autotest: fixed xAccel calculation in fakepos.py
2012-02-25 11:37:20 +11:00
Michael Oborne
23cc9c6132
APM Planner 1.1.41
...
fix mono ssl issue
modify log download
fix param dl on arduplane 2.28 (2x nulls in param list)
fix connect cancel
mono - add more comports
more error checking on radio
2012-02-24 19:39:02 +08:00
Michael Oborne
d85596841f
APM Planner 1.1.41
...
add NaN checking/error message
add config page shortcuts - F5, ctl-s and ctl-o
add +++ passthrough on terminal
add longer delay to log download
modify param receive process.
modify connecting and param receive process - re Andrew
2012-02-24 09:38:56 +08:00
Hazy
e3c3307c09
APM Planner
...
a little bit translate
2012-02-23 16:39:16 +08:00
Michael Oborne
eaa29d5e3b
firmware build
2012-02-23 01:06:56 +08:00
Chris Anderson
4134a86008
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-21 10:02:39 -08:00
Michael Oborne
ececcc6a69
ensure autoupdate works
2012-02-21 12:32:19 +08:00
Michael Oborne
56cf4f328b
APM Planner 1.1.40
2012-02-21 12:04:45 +08:00
Michael Oborne
06a1035953
APM Planner - gps lat long bug fix.
2012-02-21 11:55:36 +08:00
Michael Oborne
3bb3cbe5b6
APM Planner 1.1.39
...
fix timeout issue.
2012-02-21 07:38:06 +08:00
Michael Oborne
58d9acb92e
APM Planner - fix timeout bug
2012-02-20 23:33:04 +08:00
Michael Oborne
17c2eeb306
APM Planner 1.1.38
...
add ap param support
fix dtr
fix firmware screen on mono
misc mono fix's
mods from mandrolic - partial.
Add spanish - issue 515
new sitl images for attitude hil - issue 513
2012-02-20 19:30:47 +08:00
Michael Oborne
a3cb208468
firmware build
2012-02-20 13:24:12 +08:00
Michael Oborne
b78bca49b8
firmware build
2012-02-20 13:06:04 +08:00
Chris Anderson
1bac0ccd19
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-19 15:13:34 -08:00
Jason Short
c10778d685
Better throttle for tests
2012-02-19 15:06:54 -08:00
Jason Short
11dd9564d9
SIMPLE mode throttle fix
2012-02-19 14:21:27 -08:00
Andrew Tridgell
e5ec810c92
autotest: fixed check of return code for build_all.sh
2012-02-20 09:17:08 +11:00
Andrew Tridgell
c3d6e64efb
autotest: fixed directory for build_all.sh
2012-02-20 08:41:40 +11:00
Jason Short
1c9bb25f09
AP TEST fixes for new throttle control
2012-02-19 12:38:57 -08:00
ellissu
6cf7f45f2e
Edit and Add some Traditional Chinese translation
2012-02-19 21:36:04 +08:00
Andrew Tridgell
4a766e1abd
autotest: lower throttle level for lowering altitude in loiter
...
we were not dropping altitude in the change_alt test
2012-02-19 23:21:09 +11:00
Andrew Tridgell
9700afaf10
autotest: fixed failsafe test
...
increased timeout, added check for home location, and fixed failure
testing on timeout
2012-02-19 22:52:09 +11:00
Andrew Tridgell
66b95c14c5
autotest: added build_all.sh to autotest
2012-02-19 17:05:28 +11:00
Andrew Tridgell
08d730c266
scripts: added some more builds to build_all.sh
2012-02-19 17:05:28 +11:00
Andrew Tridgell
df8a557630
AP_Param: update users of AP_Param for ParamToken
2012-02-19 17:05:28 +11:00
Andrew Tridgell
a0d4e940ef
Heli: added heli build to build_all.sh script
...
ensure heli builds are tested
2012-02-19 16:34:43 +11:00
Chris Anderson
76baea13d5
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-18 09:17:17 -08:00
Andrew Tridgell
92b3f86996
autotest: removed the pitch trim from the Rascal
...
This interferes with the calculation of the centripetal acceleration
calculation in the DCM code. We need a new way of handling pitch trim
2012-02-18 19:27:15 +11:00
Andrew Tridgell
ffa3330f93
autotest: fixed the calculation of the acceleration due to gravity
...
this fixes the attitude calculation for the multicopter simulation
2012-02-18 19:27:15 +11:00
Andrew Tridgell
bb352c6bcf
don't need AP_Math.h here any more
2012-02-18 10:51:57 +11:00
Andrew Tridgell
85ecb05261
CPUInfo: added timing of sqrt()
2012-02-18 10:51:57 +11:00
Michael Oborne
e2c15008c2
APM Planner 1.1.37
...
fix misc errors
update polish
fix linux/mac bug. - seems alot more stable
2012-02-17 17:09:27 +08:00
Chris Anderson
3cc986c472
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-15 16:26:40 -08:00
Andrew Tridgell
3e7cc2499b
autotest: increase the rudder gain
...
this gives a bit better landing approach and turns in auto
2012-02-15 08:50:45 +11:00
Michael Oborne
4b9c08d075
APM Planner 1.1.36
...
add guided mode wp
fix setup setting save (if closed without switching tabs)
2012-02-14 22:13:11 +08:00
Andrew Tridgell
090068bee4
autotest: use more rudder for steering
...
this helps the landing a lot
2012-02-14 15:16:35 +11:00
Andrew Tridgell
1e7d3f5d48
autotest: raise the target airspeed on landing
...
we were stalling the plane in the final meters of the approach
2012-02-14 12:30:46 +11:00
Andrew Tridgell
d62cc01b65
autotest: adjusted APM parameters
...
enable compass and tweak tuning
2012-02-14 11:26:42 +11:00
Andrew Tridgell
8f18d08eb5
autotest: added a lot more interal checking
...
check each of the sub-tests pass for overall pass
2012-02-14 11:26:42 +11:00
Andrew Tridgell
27cd2893af
autotest: fixed the directory that the git hash is fetched in
2012-02-14 09:06:24 +11:00
Andrew Tridgell
957df64b86
added some AP_Param testing of the compass
2012-02-14 08:34:25 +11:00
Andrew Tridgell
d574c78c2c
autotest: fixed displayed git hash in autotest
2012-02-13 20:29:55 +11:00
Andrew Tridgell
669516cb15
autotest: fixed git hash parsing
2012-02-13 18:02:35 +11:00
Andrew Tridgell
4c5c9b5d3a
make the sw version different for VARTest
...
so we don't accidentially load bad parameters into ArduPlane
2012-02-13 16:22:53 +11:00
Andrew Tridgell
d5b96fe9bd
make it easy to run simulator under valgrind
2012-02-13 16:22:53 +11:00
Andrew Tridgell
ed2271ceea
check sizes in VARTest
...
ensures the AP types are plain old data
2012-02-13 16:22:52 +11:00
Andrew Tridgell
d55a0c3a71
added AP_Param::show_all()
...
this moves the logic into common code
2012-02-13 16:22:52 +11:00
Andrew Tridgell
0f9adbdae0
token size for first()/next() is now 16 bits
2012-02-13 16:22:52 +11:00
Andrew Tridgell
31d28e2181
update VARTest to use exact variables from ArduPlane
2012-02-13 16:22:52 +11:00
Andrew Tridgell
81e52e43c1
added some notes on EEPROM speed
2012-02-13 16:22:51 +11:00
Andrew Tridgell
570399ff98
expanded the VARTest testing to all variables
2012-02-13 16:22:51 +11:00
Andrew Tridgell
2792abfce2
demo of AP_Param with ArduPlane parameters
2012-02-13 16:22:51 +11:00
Chris Anderson
91aab0f074
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-11 09:27:41 -08:00
Michael Oborne
be079c4fe8
update dataflash log template
2012-02-11 09:47:48 +08:00
Michael Oborne
b3430563a9
APM Planner 1.1.35
...
STK cleanups
battery % fix
rc reverse fix
Polish update thanks GrzegorzSz
fix gpx's (commas)
2012-02-11 08:04:41 +08:00
Jason Short
3859ff02d4
Logging update
2012-02-09 22:22:00 -08:00
justinbeech
cc958320f2
format fix to readme
2012-02-09 05:35:53 +00:00
justinbeech
287f32392e
initial upload
2012-02-09 02:59:56 +00:00
justinbeech
1a2d5505b2
Wrote a README.txt file
2012-02-09 02:58:15 +00:00
justinbeech
1205e86528
initial upload
2012-02-09 02:46:43 +00:00
justinbeech
c8e183ab60
initial upload
2012-02-09 02:46:00 +00:00
justinbeech
282f9f78fe
initial upload
2012-02-09 02:45:37 +00:00
justinbeech
a12be05679
initial upload
2012-02-09 02:45:20 +00:00
justinbeech
ec46eced18
initial upload
2012-02-09 02:44:57 +00:00
justinbeech
b2a27708e2
Adding bootloader subdirectory for APM2 hardware
2012-02-09 02:42:29 +00:00
Michael Oborne
b5cc7f9ca7
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-08 17:11:31 +08:00
Hazy
a89a1803a8
APM Planner
...
update Simplified Chinese UI
2012-02-08 16:29:11 +08:00
Michael Oborne
54dbb4ace9
APM Planner - 1.1.34
...
fixs based on error emails - minor
2012-02-08 07:55:46 +08:00
Chris Anderson
601b602198
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-05 16:19:45 -08:00
Michael Oborne
80ccbabe63
APM Planner 1.1.33
...
fix up small bugs - mainly error checking
update dataflash log xml - thanks randy
2012-02-06 06:33:31 +08:00
Michael Oborne
f90694c671
APM Planner 1.1.32
...
fix gauge updating
add more checks on add wp - default alt and home alt
fix xplane 10 gps heading - should be 100% working now.
fix xplane throttle issue - from rc library change - rc3_trim should be same as rc3_min
2012-02-04 17:59:37 +08:00
Michael Oborne
a2c671dc77
Planner add debug file
2012-02-03 06:03:45 +08:00
Michael Oborne
36eaf24988
APM Planner 1.1.31
...
add D terms for AC
fix potenial crash when unpluging usb without disconnecting
fix arduinocpp local includes
2012-02-02 21:18:18 +08:00
Chris Anderson
be7f016f61
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-01 18:15:55 -08:00
Michael Oborne
5919279685
firmware build
2012-02-01 12:48:46 +08:00
Chris Anderson
144a499e18
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-29 18:18:44 -08:00
Michael Oborne
4d6850fd34
APM Planner 1.1.30
...
add OF_LOITER
add AC TUNE options
fix default alt issues.
make Scripts, 1 at a time.
update aerosim-rc plugin.
add new "follow me" mode- need a nmea gps and xbee on pc. control-F > follow me
2012-01-29 15:45:20 +08:00
Jason Short
9c5f77926f
to speed up testing suite
2012-01-28 22:52:39 -08:00
Jason Short
973b0b72c5
Landing now disarms automatically.
2012-01-28 22:52:17 -08:00
Chris Anderson
b37ca7cccd
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-27 19:58:46 -08:00
Michael Oborne
64f59e4dd5
APM Planner 1.1.29
...
add sensor offsets
add script note
remove some old unused define code
new setup for Aerosim-rc 3.83 - not released yet.
fix some opengl linux exceptions
fix italian
2012-01-27 16:01:28 +08:00
Chris Anderson
101dcfebe8
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-23 15:26:21 -08:00
Michael Oborne
95773eb9aa
APM Planner 1.1.28
...
fix updatechecker
fix battery config screen
2012-01-23 21:36:20 +08:00
Michael Oborne
4904b4dd12
firmware build
2012-01-23 11:38:10 +08:00
Michael Oborne
1f6503bb7a
firmware build
2012-01-23 11:21:48 +08:00
Michael Oborne
7d0545781e
firmware build
2012-01-23 10:12:56 +08:00
Michael Oborne
884b08f47f
APM Planner 1.1.27
...
fix heli setup screen
force update check on start
fix battery capacity
2012-01-23 07:13:01 +08:00
Chris Anderson
e3aa67d264
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-21 09:49:25 -08:00
Michael Oborne
d2db7cc7b2
APM Planner - aerosomrc quad hil mod
2012-01-21 17:12:00 +08:00
Chris Anderson
4d022f95d3
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-20 23:39:17 -08:00
Michael Oborne
712c675807
APM Planner 1.1.26
...
add italian - thanks emiliano
fix potential joystick throttle issue
2012-01-21 08:46:20 +08:00
Michael Oborne
cfe33d8b46
APM Planner 1.1.25
...
modify aerosim rc quad hil. tick quad, gains 3000,3000,4000,900
add armed status to HUD
2012-01-20 22:50:18 +08:00
Chris Anderson
93d5754e1d
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-20 05:34:37 -08:00
Michael Oborne
b72719cc77
APM Planner 1.1.24
...
change verify alt action
fix hil throttle scaling Thanks Justin
2012-01-20 15:36:01 +08:00
Michael Oborne
b3158cae38
APM Planner 1.1.23
...
firmware setup mod
+ extra cygwin dll zipped
2012-01-20 12:07:23 +08:00
Michael Oborne
9f3966b81b
firmware file mod
2012-01-20 10:16:00 +08:00
Chris Anderson
e4b8a10d4a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-19 08:56:17 -08:00
Michael Oborne
a2523dc6a5
APM Planner 1.1.23
...
partial setup of AC FW
FlightData map rotate
Modify battery monitor screen
2012-01-19 22:01:53 +08:00
Chris Anderson
e785361547
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-17 17:48:01 -08:00
Michael Oborne
79ba9443e9
APM Planner 1.1.22
...
fix joystick mode function - thanks doug
fix rc trim issue - thanks doug
arduinoccp seem to be working nicerly now.
2012-01-17 17:49:18 +08:00
Michael Oborne
25be642bf8
firmware build
2012-01-17 07:17:10 +08:00
Pat Hickey
cc36964a44
Rename Jeti\ Duplex directory Jeti_Duplex.
...
* Spaces in file and directory names are poor form.
2012-01-15 11:24:37 -08:00
Michael Oborne
fbf8e0b24e
firmware build
2012-01-16 02:29:51 +08:00
Chris Anderson
52f567a319
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-15 07:43:01 -08:00
Michael Oborne
9dcd005cd1
APM Planner 1.1.21
...
fixup config highlighting
mod log scanning
increase calibation timeout
add tcp console port 2300
add arduinoCPP - test
2012-01-15 17:00:50 +08:00
Chris Anderson
77e2d4a076
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
...
Conflicts:
ArduCopter/APM_Config.h
2012-01-13 09:19:04 -08:00
Michael Oborne
b52ad60864
firmware build
2012-01-14 01:00:41 +08:00
Chris Anderson
88e7a3ea89
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-11 11:02:32 -08:00
Michael Oborne
28d0377a00
APM Planner 1.1.20
...
add ac2 land Mode
add xplane 10 support
add disconnect verify
2012-01-12 01:33:42 +08:00
Chris Anderson
73d6421373
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-11 00:14:31 -08:00
Jason Short
d11eaa9265
Tweaks
2012-01-10 23:43:44 -08:00
Jason Short
7890b784b2
Added altitude
2012-01-10 23:42:26 -08:00
Jason Short
351be7c305
Made timer unsigned
2012-01-10 23:42:26 -08:00
Chris Anderson
87683aae93
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-09 16:22:50 -08:00
Michael Oborne
eb236b313b
APM Planner 1.1.19
...
fix log download
misc
2012-01-10 08:16:10 +08:00
Chris Anderson
1832fc3d94
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
...
Conflicts:
ArduCopter/APM_Config.h
ArduPlane/APM_Config.h
2012-01-09 09:01:46 -08:00
Andrew Tridgell
861222f81d
autotest: cope with startup messages in a different order
2012-01-09 18:09:04 +11:00
Andrew Tridgell
06b16a156e
autotest: make history pages use the css style
2012-01-09 18:09:04 +11:00
Jason Short
0be68e679b
updated throttle to keep altitude
2012-01-07 22:27:25 -08:00
Chris Anderson
458b88c834
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-06 12:32:39 -08:00
Jason Short
431d472695
enabled failsafe on SIM parameters
2012-01-06 10:22:26 -08:00
Jason Short
c1314bc814
Added failsafe test
2012-01-06 10:22:13 -08:00
Jason Short
6d827d0087
Added RTL with Auto_land test
...
Fixed Simple Mode test
2012-01-05 22:13:20 -08:00
Chris Anderson
ddf35c42e3
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-05 15:44:03 -08:00
Michael Oborne
1135fea61b
APM Planner 1.1.18 - missed stuff
2012-01-06 07:38:12 +08:00
Michael Oborne
1f7b81dcf8
APM Planner 1.1.18
...
fix heli setup screen
2012-01-06 06:54:47 +08:00
Chris Anderson
9520472cd5
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-05 09:48:32 -08:00
Jason Short
193848cea6
thought the commented out function was too cool to loose, but not using it now
...
changed the WP index number
2012-01-04 09:52:25 -08:00
Jason Short
fa2d84e557
Looking for larger than 255 numbers
2012-01-04 09:51:36 -08:00
Andrew Tridgell
2a3d4efb38
pysim: support octax
2012-01-04 22:15:17 +11:00
Andrew Tridgell
64b541037e
autotest: change to an octa frame for autotest
...
this will be a useful experiment
2012-01-04 22:03:37 +11:00
Andrew Tridgell
efa649e51a
autotest: fix for new sim_multicopter.py command
2012-01-04 21:49:19 +11:00
Andrew Tridgell
9df96d0e07
pysim: added more frame types
2012-01-04 21:45:58 +11:00
Andrew Tridgell
eab1ae59d0
pysim: accept frame type in sim_arducopter.sh
2012-01-04 19:34:28 +11:00
Andrew Tridgell
45b4e07776
pysim: show frame type at startup
2012-01-04 19:34:11 +11:00
Andrew Tridgell
ed5c9d4c47
rename sim_quad.py to sim_multicopter.py
2012-01-04 19:14:42 +11:00
Andrew Tridgell
ba9423f7de
pysim: added --frame option
2012-01-04 19:13:47 +11:00
Andrew Tridgell
1670f1f65b
pysim: generalise the quadcopter code for multicopters
...
this allows for arbitrary multicopter motor arrangements
2012-01-04 19:13:15 +11:00
Chris Anderson
9fc432b6a1
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-03 20:11:08 -08:00
Hazy
28467708f9
APM Planner
...
add Traditional Chinese thanks EllisSu (Su Chuan Zhi)
2012-01-04 11:03:54 +08:00
Chris Anderson
dda9256a6a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-01-02 15:02:02 -08:00
Michael Oborne
a7acefaf17
APM Planner 1.1.17
...
add polish thanks GrzegorzSz
added french thanks Don Brooks
fix posible rc setup lag
2012-01-03 06:53:14 +08:00
Chris Anderson
e6ddd47df9
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-12-30 09:31:05 -08:00
Jason Short
986b42a45b
Fixed Loiter Timeout bug, added more wind by default.
2011-12-29 23:02:02 -08:00
Jason Short
a9e1e9a8db
Turn off Super Simple by default
2011-12-29 23:02:02 -08:00
Jason Short
a29aa020ff
Made wind not reverse itself to be more natural
2011-12-29 23:02:02 -08:00
Chris Anderson
4d78095070
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-12-29 15:57:43 -08:00
Michael Oborne
f36a980b98
APM Planner 1.1.16
...
change reset order
add french lang
2011-12-30 07:34:17 +08:00
Chris Anderson
2f4edacf05
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-12-29 08:43:52 -08:00
Michael Oborne
8b2f14c40a
APM Planner 1.1.15
...
fix reset issue
add Circle AP Mode
change time to wait to 17 secs
2011-12-29 18:31:42 +08:00
Andrew Tridgell
ddab189e42
autotest: update copies of pymavlink in autotest
2011-12-29 08:30:08 +11:00
Chris Anderson
2560a97407
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-12-27 21:15:36 -08:00
Michael Oborne
d3679e5f92
firmware build
2011-12-28 07:20:05 +08:00
Chris Anderson
6c4184a7cb
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-12-27 15:19:15 -08:00
Michael Oborne
6e6d9ef4e9
APM Planner 1.1.14
...
remove bad params from loading from file
add message on firmware screen.
fix moving geofence
fix terminal crash bug
modify udp param list
2011-12-28 07:05:12 +08:00
Chris Anderson
20025343b6
temp
2011-12-26 17:54:34 -08:00
Janne M
71099006a6
Mission planner: Cleaned up parameter fetching code. Dropped requirement to receive parameters in numbered order, since with UDP communications parameter packages may arrive in random order.
2011-12-26 17:45:53 +02:00
Andrew Tridgell
8b9eb0dad1
autotest: fixed arducopter autotest
...
no longer says "Please run setup"
2011-12-26 20:10:10 +11:00
Michael Oborne
3ac67284f7
firmware build
2011-12-24 16:06:00 +08:00
Jason Short
5038fcecd8
Added more detail
2011-12-23 14:42:49 -08:00
Jason Short
c9b2d1c3c2
Added fix for Takeoff Test
2011-12-23 14:42:49 -08:00
Andrew Tridgell
d626fcb52f
added a copy of fdpexpect
2011-12-23 12:20:58 +11:00
Andrew Tridgell
30425063d8
more errno fixes for MacOS
2011-12-23 12:07:32 +11:00
Andrew Tridgell
d007ee996d
fixed errno handling for MacOS
2011-12-23 11:59:25 +11:00
Pat Hickey
89e484ef9d
APM_radio_test: build fixes
2011-12-22 13:17:04 -08:00
Michael Oborne
629643f31b
APM Planner 1.1.13
...
hazy's capm change - modded
fix wp radius at odd rotations
small geofence map update changes
fix terminal focus
2011-12-22 22:33:05 +08:00
Andrew Tridgell
e4ed3cb583
fixed typo in fly_simple()
2011-12-22 10:25:31 +11:00
Hazy
e070e080d0
APM Planner
...
a little bit Chinese translation
temporarily fix CAPM board detection based on locale
2011-12-21 22:26:26 +08:00
Janne Mantyharju
88770f6d75
Mission planner: Fixed UDP receive
2011-12-21 15:32:45 +02:00
Michael Oborne
2176736e8b
APM Planner 1.1.12
...
touch up geofence.
remove reset tab
2011-12-21 08:22:28 +08:00
Michael Oborne
b4ab14d9dc
fw fix
2011-12-21 07:18:24 +08:00
Michael Oborne
cb61e8ebb4
firmware build
2011-12-21 07:11:31 +08:00
Michael Oborne
927a801ed8
APM Planner 1.1.11
...
change wait to 75 seconds
fixup geo-fence
add kml to geo ref image
2011-12-20 21:03:29 +08:00
Michael Oborne
1ed7c48de4
APM Planner 1.1.10
...
fix log crash
2011-12-19 22:41:23 +08:00
Andrew Tridgell
11ff665ca0
CPUInfo: show the speed of 64 bit maths
2011-12-19 18:52:56 +11:00
Andrew Tridgell
ab40539a76
autotest: increare tail wheel friction
...
this keeps the plane moving in a straight line a bit more
2011-12-19 11:36:21 +11:00
Andrew Tridgell
86b86c1bdf
autotest: bit more throttle on takeoff
...
needed for increased rolling friction
2011-12-19 11:25:59 +11:00
Andrew Tridgell
991ce9077c
autotest: add a DO_CHANGE_SPEED to arduplane test
...
this slows down the Rascal for landing
2011-12-19 11:25:59 +11:00
Andrew Tridgell
5dd453e535
autotest: improved the Rascal ground reactions
...
this gets the friction and bounciness of the undercarriage much closer
to a real model
2011-12-19 11:25:59 +11:00
Michael Oborne
d832d49f27
fw
2011-12-19 07:47:35 +08:00
Andrew Tridgell
345093e982
autotest: make the Rascal a tail dragger again
...
good for testing wheeled takeoff
2011-12-18 18:57:20 +11:00
Andrew Tridgell
42d7bf7fce
autotest: added automated landing test for ArduPlane
2011-12-18 17:31:46 +11:00
Andrew Tridgell
ac5a76715b
autotest: updates ArduPlane parameters
2011-12-18 17:31:45 +11:00
Michael Oborne
a48b7a26aa
APM Planner 1.1.9
...
mavlink update
firmware wait increased. for dataflash clearing
geofence now working
2011-12-18 06:50:40 +08:00
Michael Oborne
0104d30f53
firmware build
2011-12-17 19:34:36 +08:00
Michael Oborne
c91cc66af5
apm planner 1.1.8
...
fix large firmware issue
change apm2 detect
add tot = time over target
modify firmware screen
override jsbsim ports.
remove crossthread calls
2011-12-17 17:22:40 +08:00
Michael Oborne
89e0d494d0
fw file again
2011-12-17 17:01:57 +08:00
Michael Oborne
06532b0638
firmware build
2011-12-17 16:57:19 +08:00
Michael Oborne
566778dde6
fix firmware typo
2011-12-17 16:01:58 +08:00
Michael Oborne
589e28de8a
fix firmware no
2011-12-17 15:00:11 +08:00
Michael Oborne
611700711b
firmware build
2011-12-17 14:16:36 +08:00
Michael Oborne
bf38ae5960
cleanup firmware dir
2011-12-17 06:22:29 +08:00
Michael Oborne
bfc08d5d1a
APM Planner 1.1.7
...
modify apvar dump detection
remove reference to CLI and LOG/Setup mode
add line feeds for logs/terminal
fix flow_enabled check on form load
2011-12-16 20:04:20 +08:00
Andrew Tridgell
882b4cd739
autotest: fixed prog name
2011-12-16 20:10:12 +11:00
Andrew Tridgell
b1f912a355
autotest: fixed working directory in sample scripts
2011-12-16 20:10:07 +11:00
Jason Short
e6fd8a689e
added SuperSimple and notes
2011-12-15 20:51:41 -08:00
Jason Short
ced4cf1538
testing updates
2011-12-15 20:51:41 -08:00
Jason Short
6e81b1a6f8
Added new tests
2011-12-15 20:51:41 -08:00
Jason Short
da8d342a08
Added Land control_mode
2011-12-15 20:51:41 -08:00
Jason Short
88b3708dcf
added altitude to circle mission
2011-12-15 20:51:40 -08:00
Michael Oborne
bfab9f52e9
APM Planner 1.1.6
...
fix updater for recursive dirs
add network kml = google earth 3d display
remove ]]> from kml
swap geo ref from ms image parse to custom
2011-12-16 08:17:13 +08:00
Michael Oborne
33e62e1fd0
APM Planner 1.1.5
...
fix bat % overflow
fix tlog > kml for ac
modify georef image
2011-12-15 21:44:31 +08:00
Michael Oborne
6cbe133e52
Planner remove some unused files
2011-12-13 20:56:38 +08:00
Michael Oborne
cdcec84194
APM Planner 1.1.4
...
add plane location to planner
add more serial port detection for linux
modify tlog>kml to include times, + markers
add elevon setup to radio input
2011-12-13 20:52:54 +08:00
Andrew Tridgell
eac97725f5
autotest: fgrate option has been removed from mavproxy
2011-12-13 21:34:53 +11:00
Andrew Tridgell
d68abb99a8
loosen RTL criterion (wind affected)
2011-12-13 20:05:39 +11:00
Andrew Tridgell
8847ee518d
autotest: fixed loiter hold time
...
hold time was larger than the timeout
2011-12-13 19:08:47 +11:00
Andrew Tridgell
bb50154f1c
autotest: fixed wind specification for arduplane test
2011-12-13 19:04:00 +11:00
Andrew Tridgell
2cc67d0a61
autotest: added a 5m/s wind blowing south in plane test
2011-12-13 15:29:13 +11:00
Andrew Tridgell
ad6c90c3b9
autotest: added wind support to ArduPlane simulation
2011-12-13 15:28:03 +11:00
Andrew Tridgell
35e45fefc9
autotest: show groundspeed in flightgear display
...
useful with wind
2011-12-13 15:27:32 +11:00
Andrew Tridgell
2c7e74b7a1
autotest: example startup scripts for simulators
2011-12-13 13:50:06 +11:00
Andrew Tridgell
77c791fb79
autotest: improved runsim defaults
2011-12-13 13:45:18 +11:00
Andrew Tridgell
6520c7be1b
autotest: changed default sim_quad rate to 400Hz (matches autotest
...
script)
2011-12-13 13:44:53 +11:00
Jason Short
c58e9e9135
more control over loiter time and alt change
2011-12-12 17:47:46 -08:00
Andrew Tridgell
2c0e4c1c02
autotest: use 'enter 3 times' method to get into CLI
...
this doesn't depend on build options
2011-12-13 10:36:52 +11:00
Andrew Tridgell
da43b85422
autotest: added a test script for wind generation
...
this makes it easier to experiment
2011-12-13 10:36:52 +11:00
Andrew Tridgell
37641d2576
autotest: added a 2m/s wind from east to quadcopter test
2011-12-13 10:36:52 +11:00
Andrew Tridgell
228d1620d2
autotest: added --wind option to sim_quad
...
this is in the form of speed,direction,turbulance
2011-12-13 10:36:52 +11:00
Andrew Tridgell
a58e81469f
autotest: added a wind generation class
2011-12-13 10:36:52 +11:00
Michael Oborne
8afe383737
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-12-12 20:22:58 +08:00
Michael Oborne
e8782f72c0
APM Planner 1.1.3
...
add kml overlay to flight data screen
remember last window location
websockets functioning.
add sonar types/optical flow hardware options
2011-12-12 20:22:13 +08:00
Andrew Tridgell
bb6e582ce7
autotest: fixed motor order display
2011-12-12 23:14:29 +11:00
Andrew Tridgell
a3403aeb6c
autotest: added logging of what failed
2011-12-12 23:08:20 +11:00
Andrew Tridgell
de1a5ab9ce
autotest: increase stream rate to 5 for ArduCopter test
...
needed to get accurate heading monitoring
2011-12-12 23:07:46 +11:00
Andrew Tridgell
7301a8bddd
pysim: added rotational resistance
2011-12-12 22:08:10 +11:00
Andrew Tridgell
ef8ed6aab2
autotest: calibrate accelerometers at startup
2011-12-12 22:07:53 +11:00
Andrew Tridgell
420bb9cc75
pysim: fixed the accelerometer calculation in the quad simulator
...
this was causing severe drift in the attitude calculation
2011-12-12 21:57:09 +11:00
Andrew Tridgell
12a271d4b2
autotest: nicer display in FG quadcopter view
2011-12-12 21:01:32 +11:00
Andrew Tridgell
176c12657d
added more build types to build_all.sh
2011-12-12 15:14:55 +11:00
Jason Short
9e6cf529b9
Cleaned up mission 3
2011-12-10 20:43:39 -08:00
Jason Short
f4a57557a8
Simple square test
2011-12-10 10:19:20 -08:00
Michael Oborne
55af9dbe61
firmware build
2011-12-10 08:55:42 +08:00
Doug Weibel
2ef4c79a7c
Minimum ground speed patch from Claudio Natoli. Thanks Claudio!
...
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed. Airspeed is still limited to FBW-max. Setting min_groundspeed to zero (default) disables the feature.
2011-12-09 16:43:25 -07:00
Michael Oborne
005a8afa07
add missing file for jsbsim
2011-12-10 05:51:09 +08:00
Andrew Tridgell
5130a37a9e
autotest: automatically pause when SITL sim stops
...
this allows you to use gdb on the sim without crashing
2011-12-09 15:05:27 +11:00
Andrew Tridgell
582154afb3
autotest: fixed rudder reversal for Rascal, and RC3 trim
2011-12-09 15:05:27 +11:00
Andrew Tridgell
e0d7e7cf0b
autotest: nicer display of key data in Rascal
2011-12-09 15:05:27 +11:00
Michael Oborne
b51782d42c
APM Planner 1.1.2
...
fix kml overlay
add jsbsim as simulator
generate gpx on log kml create
make georefrenceimage accessable (control-f)
2011-12-09 11:27:19 +08:00
Olivier ADLER
635047eece
ArduPPM : Added "Binaries" folder with latest compiled versions.
...
Include 400 mA USB power request modification.
2011-12-06 22:35:45 +01:00
Michael Oborne
ac02ce545c
APM Planner 1.1.1
...
fix apm 1.4 vs apm 2
Firmware screen control-C = custom hex upload
2011-12-06 20:59:52 +08:00
Olivier ADLER
65b26d1453
ArduPPM for Mega 32U2 : upped requested USB power to 400 mA inside Arduino USB code.
2011-12-05 21:56:42 +01:00
Andrew Tridgell
39d0d7ed49
autotest: fixed body/earth frames in sim_quad physics model
...
Jason, can you have a look at this?
2011-12-05 17:45:23 +11:00
Michael Oborne
2268646815
APM Planner 1.1.0
...
firmware setup for apm 2.0
add kml overlay in planner
fix reset to defaults timeout/ firmware upload
2011-12-05 06:43:29 +08:00
Michael Oborne
56316e7733
firmware build
2011-12-05 01:50:33 +08:00
Michael Oborne
91d7f6c5d6
quick srtm planner fix
2011-12-04 20:40:01 +08:00
Michael Oborne
346a572440
APM Planner - update dataflash ac2 log format
2011-12-03 18:37:48 +08:00
Michael Oborne
dfc7ae59ee
firmware build
2011-12-03 12:31:52 +08:00
Michael Oborne
1ab20928e7
firmware build
2011-12-03 10:38:25 +08:00
Andrew Tridgell
0a7f2bcc44
autotest: use random MAVLink system IDs
...
this allows more than one test to be viewed at the same time in
qgroundcontrol
2011-12-03 07:55:03 +11:00
Andrew Tridgell
dedbfc8cca
autotest: estimate the cost of sleeping for more accurate frame rate
...
this gets us quite close to 1kHz simulation
2011-12-03 07:38:51 +11:00
Andrew Tridgell
5be56a824d
autotest: run the quad simulation at a much higher rate
...
it now defaults to 1kHz
2011-12-03 07:24:58 +11:00
Andrew Tridgell
e12fabebe9
autotest: updated fakepos.py for new packet format
2011-12-02 23:43:03 +11:00
Andrew Tridgell
f96a48e42b
autotest: support all 11 PWM output channels
...
this will allow for more complex aircraft
2011-12-02 22:45:48 +11:00
Andrew Tridgell
66d65121cc
autotest: switch to big-endian metric packets internally
...
now that all the sim code is internal to the APM git repo, we can
choose saner packet formats
2011-12-02 22:12:58 +11:00
Andrew Tridgell
fb3d4eab90
autotest: fixed sim_quad viewerip handling
2011-12-02 17:37:55 +11:00
Andrew Tridgell
1878db2013
autotest: don't die if FG isn't running
2011-12-02 17:37:55 +11:00
Andrew Tridgell
cf7073128d
autotest: adapt test suite to new simulation framework
2011-12-02 17:37:55 +11:00
Andrew Tridgell
e6608b604b
autotest: added a copy of pymavlink
2011-12-02 17:37:55 +11:00
Andrew Tridgell
05c6734ca2
autotest: added runsim.py
...
this starts JSBSim, linking it into the SITL APM test code
2011-12-02 17:37:55 +11:00
Andrew Tridgell
abbf02b674
autotest: useful script for testing gyro and accel calculations
2011-12-02 17:37:55 +11:00
Andrew Tridgell
76bb6b9aa8
autotest: added scripts to start flightgear as a viewer
2011-12-02 17:37:54 +11:00
Andrew Tridgell
65699a2f2f
autotest: combined python utility code
2011-12-02 17:37:54 +11:00
Andrew Tridgell
0887804096
autotest: imported python quadcopter model as sim_quad.py
...
this allows us to keep it in sync with the main SITL code
2011-12-02 17:37:54 +11:00
Andrew Tridgell
544d2e6793
autotest: added Rascal and arducopter models
2011-12-02 17:37:54 +11:00
Michael Oborne
2ee493551d
APM Planner 1.0.99
...
trial Scripting - rc based
fix zoom to cancel
add srtm alt and auto download
2011-11-29 21:49:11 +08:00
Jason Short
79945d02b7
made missions work with index of 1
2011-11-28 10:33:05 -08:00
Andrew Tridgell
f59f9668e9
autotest: use kmz file not kml
...
saves bandwidth
2011-11-28 16:53:20 +11:00
Andrew Tridgell
12025c8b54
autotest: added idle hooks for ArduPlane testing too
2011-11-28 16:22:33 +11:00
Andrew Tridgell
2e7a48ad9c
autotest: show log numbers while dumping
2011-11-28 16:22:33 +11:00
Andrew Tridgell
f30bca01c9
autotest: use idle_hooks to prevent lockup
2011-11-28 13:53:57 +11:00
Michael Oborne
44f62c7776
APM Planner 1.0.98
...
fix wp rearange
fix right click jump/loiter option
fix problem when speech enabled on connect
2011-11-26 20:49:13 +08:00
Michael Oborne
639746649a
firmware build
2011-11-26 20:32:15 +08:00
Andrew Tridgell
5784acd55f
autotest: fixed log dump
...
log numbers are no longer sequential
2011-11-26 19:16:56 +11:00
Andrew Tridgell
8ab0dbdba7
autotest: fixed remote viewing of ArduCopter autotest
2011-11-26 18:35:25 +11:00
Andrew Tridgell
ee04c0ef50
autotest: cope with exceptions in tests leaving child processes
2011-11-26 18:12:42 +11:00
Andrew Tridgell
c64a5f354e
autotest: enable new SITL emulation code
...
this enables the register level SITL code
2011-11-25 20:00:19 -08:00
Andrew Tridgell
5fd04e0c23
autotest: mark stdout unbuffered
...
this makes the logs easier to read
2011-11-25 20:00:19 -08:00
Andrew Tridgell
4877892d6e
autotest: enable the compass for ArduCopter
...
needed for new SITL code
2011-11-25 20:00:19 -08:00
Andrew Tridgell
f66a98b969
scripts: added build_all.sh
...
this is useful when testing merge work
2011-11-25 20:00:19 -08:00
Olivier ADLER
83657698d7
/Tools : Deleted PPMEncoder folder inside /Tools folder to avoid confusion with official ArduPPM firmware.
...
Old PPM code is in the Archive folder.
2011-11-25 11:21:19 +01:00
Olivier ADLER
32e67d5a74
ArduPPM 0.9.87 minor manual correction
2011-11-25 01:16:49 +01:00
Michael Oborne
7adee96dbb
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-11-25 08:08:14 +08:00
Michael Oborne
cabd960bad
APM Planner 1.0.97
...
add custom WMS map source
fix alt save issue for feet
update SIL images
2011-11-25 08:07:14 +08:00
Olivier ADLER
fcdd12e5a3
ArduPPM 0.9.87 manual update
...
Corrected failsafe values
Minor modifications
2011-11-24 21:48:50 +01:00
Olivier ADLER
091f031d58
* ArduPPM 0.9.87 update :
...
#define to allow Radio Passthrough mode was not working. Corrected.
Removed older hex file
2011-11-23 23:36:23 +01:00
Michael Oborne
96bd7ba480
APM Planner 1.0.96
...
small tweaks
Move to .net 4.0 (make sure you have .net 4 installed) - for ironpython
2011-11-22 08:32:11 +08:00
Hazy
a5f2cb5ec0
APMPlanner
...
a few Chinese translations
2011-11-21 20:20:59 +08:00
Olivier ADLER
db8efd3287
ArduPPM 0.9.86 update :
...
#define to allow Radio Passthrough mode disabling on APM v1.4 (hardware failsafe for Arduplane)
This is to allow for safe use of CH8 with Arducopter.
2011-11-21 02:22:36 +01:00
Michael Oborne
eb2f8180ab
firmware build
2011-11-21 05:02:13 +08:00
Michael Oborne
076b93967d
firmware build
2011-11-21 04:53:20 +08:00
Michael Oborne
307971f82b
firmware build
2011-11-21 03:03:42 +08:00
Hazy
bf6a675a82
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-11-20 20:17:47 +08:00
Hazy
02591d8d38
APM Planner - fix "Invalid Board Type" bug for board using mega32u2
2011-11-20 20:16:47 +08:00
Jason Short
a47f28cfdb
tweak to loiter turns command
2011-11-20 00:22:53 -08:00
Andrew Tridgell
aab512636e
ArduPPM: let the 2560 know when the USB is connected
...
this sets pin 23 on the 2560 according to whether the USB cable is
connected or not
2011-11-20 19:06:24 +11:00
Andrew Tridgell
5aa962c880
ArduPPM: fixed paths for includes
...
this allows it to build on linux/macos
2011-11-20 19:06:24 +11:00
Jason Short
14f0f7b6f3
lengthened log timeout
2011-11-19 17:31:36 -08:00
Jason Short
269c6d26c9
Added KML link
2011-11-19 16:59:54 -08:00
Michael Oborne
56df75fbb1
APM Planner 1.0.95
...
fix ac2 heli error
fix guide mode wp
fix tuning graph on mono
fix autozoom on planner map
modify prefetch - current screen
fix zoom bar for mono
fix base class for special functions
2011-11-20 08:17:17 +08:00
Michael Oborne
202c0663cd
firmware build
2011-11-20 07:46:05 +08:00
Jason Short
9e04d4c45b
longer timeout
2011-11-19 14:59:48 -08:00
Jason Short
2d5ee0f7e2
Switched to Mission 2
2011-11-19 14:03:26 -08:00
Jason Short
f345c4c987
Checking for climb rate
2011-11-19 14:03:08 -08:00
Michael Oborne
178b8c0d19
fix ap hil
2011-11-19 07:47:33 +08:00
Michael Oborne
1394a93ef3
APM Planner 1.0.94
...
scripting/command restructure - testing
heli interface update
firmware size checker
Non meter wp file fix
2011-11-18 22:33:44 +08:00
Andrew Tridgell
f737d22026
autotest: added a loop to ArduPlane test
2011-11-18 17:50:12 +11:00
Andrew Tridgell
fdaa760aec
autotest: use FG_SCENERY for fgear scenery path
2011-11-18 17:50:12 +11:00
Andrew Tridgell
dd8593273f
autotest: make log messages on failure clearer
2011-11-18 17:50:12 +11:00
Andrew Tridgell
00374bea0a
autotest: fixed killing of Xvfb
...
this should make fly.ArduPlane more reliable
2011-11-18 17:50:12 +11:00
Jason Short
4cf718854e
Complex mission script
2011-11-16 21:29:10 -08:00
Jason Short
839774fbf3
Added more time for timeouts
2011-11-16 00:22:22 -08:00
Michael Oborne
ecf601229f
firmware build
2011-11-16 13:07:06 +08:00
Michael Oborne
2d3f97667f
APM Planner 1.0.93
...
fix new wp format for . vs ,
2011-11-16 07:50:37 +08:00
Michael Oborne
c235cbfc27
APM Planner 1.0.92
...
update wp file format - QGC 110
fix old wp file format abs/rel issue
2011-11-15 21:50:12 +08:00
Jason Short
0f33ad74dc
Had to disable check of current WP. Going into auto mode executes commands right away and the reported index will differ per mission. Multiple commands may be executed.
2011-11-13 22:58:27 -08:00
Jason Short
31cb62620f
Mission test update
2011-11-13 22:56:33 -08:00
Michael Oborne
2672cac850
firmware build
2011-11-14 13:36:43 +08:00
Michael Oborne
bdadc72736
firmware build
2011-11-14 13:33:45 +08:00
Michael Oborne
803f4206ae
firmware build
2011-11-14 13:32:15 +08:00
Jason Short
d226b875c8
set first WP in wait_waypoint to 0
2011-11-13 13:42:49 -08:00
Jason Short
a1da5fb9e5
set proper code for Home WP
2011-11-13 13:41:23 -08:00
Andrew Tridgell
d4aa61e97e
autotest: re-adding KMZ track
2011-11-14 06:38:49 +11:00
Andrew Tridgell
3057ef9fb7
autotest: fixed incorrect altitude wait
2011-11-13 23:59:20 +11:00
Andrew Tridgell
be886ef9bc
autotest: fixed waypoint wait code
...
this allows fly.ArduCopter to pass again
2011-11-13 23:50:29 +11:00