dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
40,986 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

2544 Commits

Author SHA1 Message Date
Alessandro Simovic 06f69cd469 Add SITL tests for control allocation 2022-05-12 07:58:56 +02:00
Silvan Fuhrer ea2c1095c2 ROMFS: SITL tiltrotor: enable control allocaton and only tilt front motors 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-05-11 10:19:37 +02:00
Daniel Agar a71d101869 ROMFS: delete 3037_parrot_disco_mod airframe 2022-05-10 16:23:20 -04:00
Daniel Agar 42d7fb0b66 ROMFS: delete 3035_viper airframe and mixer 2022-05-10 16:23:20 -04:00
Daniel Agar 61c5d11375 ROMFS: delete 3034_fx79 airframe 2022-05-10 16:23:20 -04:00
Daniel Agar f1a1ed4958 ROMFS: delete 3030_io_camflyer airframe 2022-05-10 16:23:20 -04:00
Daniel Agar b00d0720cd ROMFS: delete 13010_claire airframe 2022-05-10 16:23:20 -04:00
Daniel Agar 451cc5058d ROMFS: delete minimal DJI airframes 2022-05-10 16:23:20 -04:00
Daniel Agar fa1891ace2 ROMFS: delete steadidrone airframes 2022-05-10 16:23:20 -04:00
Peter van der Perk b1ad4e8864 Upgrade libcanard to 3.0 and rename uavcan_v1 to cyphal 
Did some prep work for redundant interfaces by introducing CanardHandle class to decouple physical interfaces from cyphal.cpp
 2022-05-10 09:46:18 -04:00
achim fc887a23af
boards: matek h743 mini 2022-05-06 10:09:14 -04:00
Silvan Fuhrer 20400cbb74 ROMFS: reduce FW_SPOILERS_LND to 0.4 to leave ailerons enough control authority 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-05-06 16:05:03 +02:00
Silvan Fuhrer 4b8f93de5c FW: rework spoiler/flap control logic 
- remove separate flaperon controls input to mixer instead enable spoiler support
- add slew rate limiting on both flap and spoiler controls
- add spoiler configuration for Landing and Descend
- add trimming from spoiler deflection
- FW Attitude control: remove FW_FLAPS_SCL param -->
    The flap settings for takeoff and landing are now specified relative to full range.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-05-03 15:11:21 +02:00
Silvan Fuhrer 21a2892f47 use actuator_controls[8] for collective tilt for tiltrotor VTOL, instead of [4] 
[4] is reserved for Flaps, so also having the tilt on it was preventing us from
using flaps on tiltrotors, and other ripple effects.
By using [8] the tilt is separated from all other channels - it requires to increase the size of
actuator_controls by 1 to 9.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-05-03 15:11:21 +02:00
Daniel Agar f390f52058 drivers/differential_pressure: remove lib/drivers/airspeed dependency and cleanup 
- split ms4525_airspeed into separate ms4515 and ms4525 drivers
 2022-04-26 08:39:19 -04:00
Silvan Fuhrer ae5725e71a ROMFS: fix typo in convergence and clair configs 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-04-23 10:29:57 -04:00
Daniel Agar 9073f3ccdf px4flow allow delayed background startup 2022-04-22 21:11:02 -04:00
Hamish Willee e1d3728208 13004_quad+_tailsitter - outputs mixed up 2022-04-22 07:34:05 +02:00
alexklimaj 6e0ac66c3c drivers/optical_flow: new PixArt PAA3905 optical flow driver 2022-04-14 16:47:53 -04:00
Daniel Agar 0a0987a6e0 ROMFS: move px4flow start to rc.sensors 2022-04-12 21:22:41 -04:00
Silvan Fuhrer 6096620828 ROMFS: remove duplicate setting of NAV_LOITER_RAD to 80 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2022-04-09 14:31:17 -04:00
Daniel Agar 98623f69a3 update mavlink submodule to latest 
- update MAV_TYPE VTOL usage for current mavlink
 2022-04-07 20:35:41 +02:00
alessandro 8af0eeae46
1011_iris_irlock: require precland (#19431) 2022-04-04 08:27:31 +02:00
Daniel Agar f4c3084c26 init adjustments to ensure used topics are advertised early (primarily for logging) 
- multi-EKF create each instance as soon as IMU & mag are advertised (before device id populated)
 2022-03-23 16:51:16 -04:00
Matthias Grob eee4aaee4f Commander: remove dynamic position velocity probation period 2022-03-23 15:04:48 -04:00
Daniel Agar 36e6527013 ROMFS: MAV_TYPE cleanup 
- set MAV_TYPE as a parameter default per vehicle type, or airframe if necessary
 - cleanup MAV_TYPE param metadata and commander helper to only include
what's currently used in PX4
 2022-03-17 09:28:10 -04:00
Ncerzzk cb23179c50
Add Goertek SPL06 barometer driver (#19229) 
Signed-off-by: ncer <huangzzk@bupt.edu.cn>
 2022-03-15 10:13:03 -04:00
Konrad 963f6a91d9 exclude Mixer for Tailsitter with x motor configuration and elevons for fmu-v2 and omnibus to avoid flash size issues 2022-03-15 10:44:27 +01:00
JunwooHWANG 35af604a82
Added RTL Switch Setting for ATL Mantis Edu (#19267) 
Co-authored-by: Junwoo Hwang <junwoo@auterion.com>
 2022-03-02 16:57:20 +01:00
Beat Küng 76d8d8cae6 control_allocator: generic motor configuration for standard vtols 
This adds the pusher/puller to the standard motors and makes the axis
configurable.
 2022-02-25 08:30:58 +01:00
Beat Küng dce2968470 ROMFS: set CA_* + HIL_ACT_* params for hitl+sih airframes 2022-02-25 08:30:58 +01:00
Roman Dvořák 976c994156
Extend the PCF8583 driver to support multiple instances (#19232) 
* Add some restart events into pcf8583 driver

Co-authored-by: Vít Hanousek <vithanousek@seznam.cz>
 2022-02-21 16:47:16 -05:00
Daniel Agar fca886e05a drivers/irlock: add SENS_EN_IRLOCK parameter to start driver 2022-02-11 22:57:56 -05:00
alessandro 1febba315a mantis: disable optical flow fusion in EKF2 
Above grass fields I can frequently observe position 
instabilities with the mantis due to the optical flow fusion.

Let's disable flow fusion for now.
 2022-02-11 15:33:34 +01:00
Beat Küng 86860808e3 ROMFS: set CA_* geometry params for some of the generic airframes 
Not enabled, makes it easier to switch.
 2022-02-09 10:08:59 +01:00
Beat Küng a2ba613254 ROMFS: remove 4018 + 6003 ctrlalloc airframes 2022-02-09 10:08:59 +01:00
Julian Oes 490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
Julian Oes 853047c643 Mantis: use gimbal auto input 
This allows RC and mavlink gimbal v2 input.
 2022-02-07 19:21:15 -05:00
Jaeyoung Lim 3dd5c1fbaf Enable NPFG by default on the believer 2022-02-02 17:16:19 +01:00
Roman Dvořák 2b1229786e Multi instance SHT3x driver support 2022-01-31 21:38:26 -05:00
Roman Dvořák ed475ca324 SHT3x driver 
SHT3x driver, clean code
changes leading to merge TFHT with CUAV hygrometer
Delete humidity_temperature.msg
Update CMakeLists.txt
rename 'atmosphefir_quantities' to 'hygrometers'
fix logging
removed cmake files
fix PR issues
 2022-01-31 21:38:26 -05:00
Daniel Agar 0104b84289 logger: PX4_SITL log all ekf2 publications at full rate for replay 2022-01-28 07:46:54 +01:00
Daniel Agar d2ce9a8560 ROMFS: rc.replay fix ulog_params argument 2022-01-28 07:46:54 +01:00
FARHANG fe44e281e5
ROMFS: Holybro X500 v2 airframe addition 2022-01-18 15:11:41 -05:00
Beat Küng 4cbee44220 rc.mc_defaults: only set IMU_GYRO_RATEMAX if default 
Allows boards to set a higher rate.
 2022-01-17 10:41:33 -05:00
romain-chiap 4e06b40e2b
sih: add tailsitter support, disable UAVCAN 2022-01-11 08:29:19 +01:00
Julian Oes 6ed48ad0c0 ROMFS: Remove now unused variable 2022-01-10 23:04:10 -05:00
Julian Oes b52972f3f8 ROMFS: remove duplicate startup tune 
This must have come back in a rebase.
 2022-01-10 23:04:10 -05:00
Julian Oes 1baecf07ad Mantis: remove startup tune volume 
Let's just leave it at the default like the rest of the beeps.
 2022-01-10 23:04:10 -05:00
Julian Oes 38439256e5 Mantis: move MIXER vars to airframe init 
The two were actually conflicting and are now consolidated.
 2022-01-10 23:04:10 -05:00
Julian Oes 14fb019821 Mantis: move SYS_DM_BACKEND to board_defaults 
Otherwise it is set too late and not used during startup.
 2022-01-10 23:04:10 -05:00
Julian Oes a061d7a02a Mantis: use dataman in RAM 2022-01-10 23:04:10 -05:00
Julian Oes b1a1e4913b Mantis: rotate flow by 180 degrees 
This seemed to be exactly inverted.
 2022-01-10 23:04:10 -05:00
Julian Oes 28d69d3285 Mantis: fix throttle RC calibration 2022-01-10 23:04:10 -05:00
Julian Oes b92aa92bec Mantis: fix mixer loading 
The ordering before did not work out, and without the sleep it fails.
 2022-01-10 23:04:10 -05:00
Julian Oes 24bdf79180 ROMFS: fix debug output 2022-01-10 23:04:10 -05:00
Julian Oes e4763f15f6 Mantis: add RC hacks 
This changes the way RC is handled for the Mantis:
- The RC values are re-written when arriving over MAVLink. They are
  rescaled from 0..4095 to 1000..2000 and the channel bits added to
  separate channels. This makes the downstream handling easier.
- Gimbal pitch is moved from Aux1 to Aux2 as that should be the default.
- Aux3 and Aux4 are used for the photo and video trigger.
- The speed button is used as the FLTMODE channel and set to switch
  between POSCTL and ALTCTL.
 2022-01-10 23:04:10 -05:00
Julian Oes 1754e25920 vmount: add param to use RC input for angular rate 
Until now RC input was translated to angles only. I added the param
MNT_RC_IN_MODE which allows the RC input to be used for angular rate.
 2022-01-10 23:04:10 -05:00
Julian Oes 7d09635fb6 ROMFS: add option for dataman args 
This is required for boards requiring dataman in RAM.
 2022-01-10 23:04:10 -05:00
Julian Oes bb09646b41 ROMFS: allow the output config to be skipped 
This is required for the ATL Mantis-EDU.
 2022-01-10 23:04:10 -05:00
Julian Oes 0fbb03dee1 ROMFS: add option for startup tune volume 
Otherwise the CBRK_BUZZER param does not work as it should.
 2022-01-10 23:04:10 -05:00
Julian Oes fa282cfe86 Mantis: make startup less loud 2022-01-10 23:04:10 -05:00
Julian Oes 2b4b87571c Mantis: adapt RC calibration 
This is with a newer RC firmware.
 2022-01-10 23:04:10 -05:00
Julian Oes 856e229482 ROMFS: reset the startup sound for Mantis 2022-01-10 23:04:10 -05:00
Julian Oes 1be4e35ed4 ROMFS: move startup sound further down 
This way it works for the Mantis where the tap_esc driver needs to be
running before beeping is posssible.
 2022-01-10 23:04:10 -05:00
Julian Oes 185e4cfd48 Mantis: set range finder limits, and min quality 
The limits might somewhat match the sensor, guessed based on the
original driver.

The quality is set so that spikes when sitting on the ground are not
used.
 2022-01-10 23:04:10 -05:00
Daniel Agar 2e2ac36cab
drivers/uavcan: make firmware server available on both CAN1/CAN2 always (if enabled) 
- uavcan firmware server no longer shuts down when arming (nodes might restart in flight)
 - always handle UAVCAN parameters with or without the FW server active
 - remove legacy ESC enumeration in FW server
 2022-01-10 11:13:02 -05:00
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
romain-chiap 4264ec992d Update 1101_rc_plane_sih.hil 
This bugged me for a while, the sih FW would not takeoff from the ground. Now, I found it!
 2022-01-05 16:18:53 -05:00
Matthias Grob bbb04ab4b8 Remove relaying of maximum altitude through land detector 2022-01-05 14:54:59 +01:00
Daniel Agar 7df1721d32 ROMFS: rcS disable simplistic SD I/O test 
- this was added when trying to identify SD card issues at boot and
trigger a format, but didn't provide any value
 2022-01-01 18:43:27 -05:00
Daniel Agar 990d7c159d pwm_out: cleanup and prep for linux compatibility 2021-12-28 11:04:00 -05:00
Silvan Fuhrer 1ad66e606b ControlAllocation: introduce convention for control surface deflection sign 
- horizontal control surfaces: up=positive deflection
- vertical control surfaces (rudder): right=positive deflection
- mixed (V-Tail): up=positive deflection

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-24 20:06:13 -05:00
Beat Küng 203e253dfe airframes: sitl boat: switch to dynamic control allocation 2021-12-24 20:06:13 -05:00
Beat Küng 8486ca5766 airframes: sitl cloudship: switch to dynamic control allocation 2021-12-24 20:06:13 -05:00
Silvan Fuhrer 07306c4be3 control_allocator: add support for Tailsitter VTOL 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-12-24 20:06:13 -05:00
Beat Küng d688e5dee4 sitl airframes: add control allocation config to some airframes (not enabled) 
To use them, manually set SYS_CTRL_ALLOC
 2021-12-24 20:06:13 -05:00
Beat Küng 2362feddac airframes/uuv_bluerov2_heavy: switch over to control allocation 2021-12-24 20:06:13 -05:00
Beat Küng 43e15148f6 rover: switch sitl configs to control allocation 2021-12-24 20:06:13 -05:00
Beat Küng 70e46a194f control_allocator: major refactoring & additions 
- allow effectiveness matrix to select control allocator method
  (desaturation algorithm)
- add actuator_servos publication
- add support for multiple matrices (for vtol)
- add updateSetpoint callback method to actuator effectiveness to allow it
  to manipulate the actuator setpoint after allocation
- handle motor stopping & reversal
- add control surfaces & tilt servos
- handle standard vtol + tiltrotor
- rename MC rotors params & class to be more generically usable
- fixes and enables ActuatorEffectivenessRotorsTest
 2021-12-24 20:06:13 -05:00
Beat Küng 230aae580f ROMFS: add control_allocator to all types 2021-12-24 20:06:13 -05:00
Daniel Agar 14c2225b1c ROMFS: rcS dump parameter backup contents before using 
- this is mainly for debug comparion
 2021-12-23 17:45:50 -05:00
Thomas Debrunner 43bc6db99e PPS capture: Add a param to enable / disable PPS capture module. This is important, since it takes over an FMU pin which can no longer be used for actuator output. 2021-12-17 07:56:08 +01:00
Igor Mišić 298a8c4637 boards/fmu-v5x: allocating PPS pin 
- start pps_capture before pwm_out
 2021-12-17 07:56:08 +01:00
Daniel Agar ca3f6f59f9 dataman: add SYS_DM_BACKEND parameter 2021-12-10 09:10:02 -05:00
Daniel Agar 1f6acd0171 parameters: add simple backup and restore mechanism 2021-12-06 09:37:08 -05:00
Daniel Agar e692f4ca01 ROMFS: rcS param import fail try to gather data 
- startup tune and console message to notify user
 - save dmesg and param bson copy to microsd
 - run param dump to show full contents of bson
 2021-12-06 09:37:08 -05:00
Julian Oes 7c0165ea0c ROMFS: avoid setting none params 2021-12-02 11:40:26 -05:00
Julian Oes f537b30c86 init.d-posix: exit on error 
This fixes a case where the px4 startup is not stopped when the
px4 process is killled using -SIGKILL against the px4 deamon.
In that case, the currently executing command/client is killed
and properly shutting down with result -1, however, the next command
is started anyway.

This means that the next time we try to run the simulation we get a
"PX4 daemon already running for instance 0" error and PX4 doesn't start
properly.

By adding exit on error, we properly exit in the case where the startup
script gets stopped/killed.
 2021-12-02 11:40:26 -05:00
Silvan Fuhrer 42845d6c6e SITL configs VTOL/plane: improve SITL tuning a bit 
remvoe some tecs params from configs that acutally lead to worse performance than defaults

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-26 09:24:23 -05:00
Daniel Agar c049c26ac5 ROMFS: rcS attempt to format SD if .format file exists 2021-11-25 13:11:45 -05:00
Beat Küng 2809dd8944 control_allocator: remove min/max/scale params 2021-11-23 12:40:22 -05:00
Beat Küng f99c2617ad control_allocator: add module.yaml, add CA_MC_R_COUNT param & update defaults 2021-11-23 12:40:22 -05:00
Beat Küng dbc889a2ae rc.mc_apps: remove 'param set MPC_USE_HTE 0' for control allocation 
this is working now
 2021-11-23 12:40:22 -05:00
Silvan Fuhrer e596607e2e minor comments update 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-23 14:48:51 +01:00
Daniel Agar f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Julian Oes 4a5ef1c81e ROMFS: whitespace 2021-11-09 16:05:25 +01:00
Julian Oes eeb7682fd9 ROMFS: start manual_control for SITL 2021-11-09 16:05:25 +01:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Daniel Agar 9c15be22d6 mc_autotune_attitude_control: add new MC_AT_EN parameter to enable 
- only enabled by default on boards that aren't memory constrained
 2021-11-05 09:52:07 -04:00