Commit Graph

393 Commits

Author SHA1 Message Date
Dr.-Ing. Amilcar Do Carmo Lucas 5b67b33310 AP_GPS: Remove un-used AP_GPS::inject_data_all() function 2017-05-01 13:06:18 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 5261654756 AP_GPS: Only inject RTCM data to the selected GPS device defined in GPS_INJECT_TO parameter 2017-05-01 13:06:18 +01:00
Peter Barker b7baca8d43 AP_GPS: move GPS type announcements into backend
See #4584
2017-04-23 21:04:17 +01:00
Peter Barker 2354a0ec5a AP_GPS: ability to log GPS detection state to dataflash 2017-04-23 21:03:23 +01:00
Peter Barker 94a5e94ec9 AP_GPS: canonicalise statustext messages
Use "GPS %d" prefix, where %d is instance+1, to correspond
with parameters
2017-04-23 09:09:30 +10:00
Niels Joubert 4bf9fc071c AP_GPS: Adds SBP Version 2: Swift Navigation Piksi Multi support
This commit adds:

- New driver for SBPv2
--- Support Piksi Multi, Swift Navigation's multi-band multi-constellation GPS
--- Proper parsing of SBP flags
--- Instant response to Piksi status changes (no more timeouts)
--- Support for Piksi Multi as a Single-Point-Positioning GPS or only onboard GPS
--- Incorporates horizontal and vertical accuracy estimates, and vdop.
- Updates driver for SBPv0
--- Continue support for previous Piksi

- Dispatches correct driver based on SBP version.
2017-04-18 18:25:54 +01:00
Eugene Shamaev 8130d85b42 AP_GPS: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev dfe9b0e6fc AP_GPS: support for UAVCAN connected GNSS receivers 2017-04-10 22:38:12 +01:00
Jacob Walser 1b00dfb642 AP_GPS: Fix parameter metadata 2017-03-22 16:16:26 -07:00
Pierre Kancir afb488c627 AP_GPS: fix implicit conversion warning from float to double 2017-03-17 13:07:57 +01:00
Randy Mackay b82098ca44 AP_GPS: fix blended ground course
Thanks to jyl58 for finding this
2017-03-13 11:21:47 +09:00
Randy Mackay 3e628f30ff AP_GPS: fix blending when accuracy reported as 1mm
Thanks to Michael DuBreuil for suggesting the fix
2017-03-13 11:31:51 +11:00
Randy Mackay 2002827de3 AP_GPS: rename pre-arm blending health check 2017-03-13 11:31:51 +11:00
Randy Mackay e9c881c668 AP_GPS: stop blending if too many blending failures 2017-03-13 11:31:51 +11:00
Randy Mackay b7ad8da9b9 AP_GPS: minor bracketing fix
This silences a warning from eclipse
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay 5de64273ec AP_GPS: more efficient initialisation of blending arrays 2017-03-13 11:31:51 +11:00
Randy Mackay ef1399a52f AP_GPS: fixups after peer review
This includes these changes:
RATE_MS, RATE_MS2 parameter description Range minimum reduced to 50
_blend_health_counter is reset to 0 if blending is disabled
GPS_MAX_RECEIVERS is replaced with GPS_BLENDED_INSTANCE where appropriate
simplify all_consistent functions check of number of receivers
calc_blended_weights fix for initial check of how many receivers we have
remove unnecessary setting of GPS last time when blending fails
remove RebootRequired from AUTO_SWITCH param description
2017-03-13 11:31:51 +11:00
Randy Mackay 729ce34ce3 AP_GPS: add all_consistent and blend health for use as pre-arm check 2017-03-13 11:31:51 +11:00
Randy Mackay 72dfe1127f AP_GPS: protect parameters from being accessed externally
backends become friends so they can continue to access parameters held in frontend
get_rate_ms made private because only used by frontend
Also moved static arrays higher in cpp file
2017-03-13 11:31:51 +11:00
Randy Mackay 3172657f26 AP_GPS: move constructor and complex accessors to cpp file
These functions are slightly long and make the .h file hard to read.  Also saves a small amount of flash space.
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay 0066022a7f AP_GPS: check for valid instance in highest_supported_status
highest_supported_status will always return FIX_3D for blended or invalid instance
setHIL_Accuracy checks instance is 2 or less
send_mavlink_gps2_raw uses num_instances variable directly to avoid confusion with num_sensors
2017-03-13 11:31:51 +11:00
Randy Mackay e764f0d5d0 AP_GPS: sanity check update rate
Also minor spelling and parameter documentation fix
2017-03-13 11:31:51 +11:00
priseborough 6b26bdd454 AP_GPS: Add option to blend multiple GPS receivers
Fix pre-existing bug in hard switch logic
Update GPS_AUTO_SWITCH description
protect against zero accuracy estimates returned by GPS drivers
2017-03-13 11:31:51 +11:00
Randy Mackay cd379b0e86 AP_GPS: move time_epoch calcs into proper file
The frontend implementation was in the backend file
No functional change
2017-03-13 11:31:51 +11:00
Randy Mackay 2d0258b6a2 AP_GPS: remove unused highest_supported_status(void) 2017-03-13 11:31:51 +11:00
Michael du Breuil 7b483a1460 AP_GPS: Ublox, always quickly set the rates until we have fetched the version 2017-02-23 07:33:58 +11:00
Lucas De Marchi 9f09442548 AP_GPS: rename UNIX_OFFSET
To keep consistency with other constants and make clear the unit.
2017-02-11 01:34:09 -08:00
murata 30151c8253 Global: Define MSEC_PER_SEC, MSEC_PER_WEEK, SEC_PER_WEEK and UNIX_OFFSET. 2017-02-11 01:34:09 -08:00
Andrew Tridgell c0cc2faefd AP_GPS: disable esoteric GPS types on FMUv2 2017-01-29 16:31:06 +11:00
priseborough 6d53ab7b76 AP_GPS: minor comment change 2017-01-27 16:57:42 +09:00
priseborough 4a490d522e AP_GPS: use standard unit descriptor for milliseconds 2017-01-27 16:57:42 +09:00
priseborough be0096e812 AP_GPS: Allow the user to specify the GPS time delay
If the user sets a non-zero value of the delay it will be used in preference over the default value for that GPS type.
If the GPS type is unknown and the parameter is set to zero, then a default delay of 1 sample period will be used (eg 200ms for 5Hz).
2017-01-27 16:57:42 +09:00
Andrew Tridgell 5d18f3a453 AP_GPS: added backend specific get_lag() function
the ublox7 and 8 seem to produce lower lag, around 120ms. Separately
we should also look at running these at 10Hz and see if that helps.
2017-01-27 16:57:42 +09:00
Michael du Breuil 0cf41c9288 AP_GPS: Force ublox baud rate if we are allowed to config the GPS 2017-01-26 07:48:22 +09:00
Michael du Breuil c696137a42 AP_GPS: Update the number of leapseconds 2017-01-18 18:07:26 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas b7f32e216d AP_GPS: update parameter descriptions 2017-01-09 13:32:28 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 9aaeb6fe1a AP_GPS: Add missing GPS Types 2017-01-06 21:24:42 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas 8419045aea Spell in comments 2017-01-06 10:57:39 -08:00
murata fd153f2861 AP_GPS: Change search method of GPS type to switch statement.
AP_GPS: Correct the tab code to white space.
2016-12-21 10:31:43 +09:00
murata c808ee2f49 Global: To nullptr from NULL.
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Randy Mackay aeb1de08f5 AP_GPS: fix MAV compile error 2016-10-29 16:45:00 +09:00
Randy Mackay 9290ee65cc AP_GPS: MAV driver uses existing baud rates
GPS_INPUT messages can arrive through any mavlink serial port so we shouldn't be modifying any port's baud rates.
2016-10-29 14:33:44 +09:00
Peter Barker 7b75a4ec09 AP_GPS: add missing parameter metadata 2016-10-27 09:15:03 -07:00
priseborough 1dec6dd9b0 AP_GPS: Update parameter documentation
Add brief description of body frame conventions.
2016-10-27 14:54:45 +11:00
priseborough b51c9dea6c AP_GPS: Add parameters defining antenna offset in body frame 2016-10-27 14:54:41 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 500df1edf2 AP_GPS: support GPS_RTCM_DATA fragmented MAVLink message
support re-assembly of RTCM data packets
2016-10-11 11:00:35 +11:00
Michael du Breuil cf5e79f80e AP_GPS: ublox support user controlled rate updates
Also corrects accepting bad nav rates as configured, and fixes a incorrect
index as to which GPS is being updated
2016-10-11 10:44:51 +11:00
Michael du Breuil 3e3f539a6a AP_GPS: Raise target baud of u-blox devices
A knockon effect is that we need less config strings as raw logging
on u-blox will use the same baud rates
2016-10-11 10:44:50 +11:00
Michael du Breuil 9c4b3ec1e1 AP_GPS: Fix incorrect incrementing of last_baud rate
This is a revert of 7c3b8dceb which tried to start at index 0 of the
array of baudrates, however because of the way last_baud is used
this lead to a GPS always being reported as being 1 index off which
lead to users getting reports of baud rates that their GPS wasn't
configured for

Also renames last_baud to be current_baud as that is how it's
actuallly used and should reduce future confusion

And fixed some tabs/vs space issues around where the last_baud rate
was incremented.
2016-09-25 08:50:47 -07:00
Michael Oborne 11c376588d AP_GPS_NOVA: support tersus/novatel/comnav gps 2016-09-20 10:53:49 +10:00
Matthew Brener 06388b0417 Global: Fix typos 2016-09-17 00:36:36 -03:00
Lee Hicks 51e8d8a294 AP_GPS: Don't send config blob to GPS unless AUTO_CONFIG=1
All GPS types will recieve startup up blob config. For
some recievers this will cause them to hang. This commit
only allows sending of blobs if AUTO_CONFIG=1. Fixes #2622
2016-08-16 10:56:37 +10:00
Lee Hicks 7c3b8dceb9 AP_GPS: Fixed GPS serial speeds starting at 1 instead of 0
The counting of this will increment the counter before
selecting the baud speed, skipping the first baud rate.
2016-08-16 10:56:36 +10:00
Lee Hicks 3dd4f30460 AP_GPS: Adding 19200 as serial speed for GPS
APM supports baud speeds of 19200, but GPS baud rates
don't support it. This commit adds it to follow APM supported
baud rates.
2016-08-16 10:56:36 +10:00
Allan Matthew 4249f7dbe6 AP_GPS: Add GPS_MAV type and accept GPS_INPUT message 2016-07-12 15:34:27 +09:00
dgrat 41661f815f AP_Math: Replace the pythagorous* functions with a variadic template
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
Andrew Tridgell 5ddb872b79 AP_GPS: allow Replay to set last sample time 2016-05-07 18:27:23 +10:00
Andrew Tridgell d24bbcd1ff AP_GPS: convert vdop to cm 2016-05-07 18:27:22 +10:00
Andrew Tridgell b424c49bc7 AP_GPS: change ground course to be in degrees
more accuracy for replay
2016-05-07 18:27:21 +10:00
Andrew Tridgell 4e5f1374da AP_GPS: added setHil_Accuracy() 2016-05-07 18:27:19 +10:00
Lucas De Marchi ff10d1136c AP_GPS: reorganize includes
Due to the way the headers are organized a single change in a
AP_GPS backend would trigger a rebuild for most of the files in the
project. Time could be saved by using ccache (since most of the things
didn't change) but we can do better, i.e.  re-organize
the headers so we don't have to re-build everything.

This makes internal headers internal and then other libraries only
depend on the AP_GPS.h header.
2016-04-14 21:01:51 -03:00
Michael du Breuil 2538c17ee0 AP_GPS: add fetching of gps configuration failure reasons 2016-04-13 11:24:01 -03:00
Alexey Bulatov 3933ac2a63 AP_GPS: Added ERB to AP_GPS 2016-03-02 06:04:52 -08:00
Andrew Tridgell 14bd4ba2c7 AP_GPS: removed console print for GPS type
it is now sent as a STATUSTEXT
2016-02-24 14:22:48 +11:00
Michael du Breuil 1426ff2732 AP_GPS: Broadcast what type of GPS is found and at what baud rate 2016-02-24 14:22:48 +11:00
Tom Pittenger 12fab6c59a AP_GPS: save cfg only when needed
added GPS_SAVE_CFG param option 2
2016-02-12 15:33:33 -08:00
Michael du Breuil 726bf110cc AP_GPS: update save_cfg description
Saving config is not expected to work on a LEA-6H based on user reports, so the parameter should warn of this
2016-02-12 00:37:05 -08:00
Michael du Breuil 4251ee0e4b AP_GPS: u-blox verify ublox settings
The ublox driver will now continuosly poll for the settings from the GPS and correct any that are found to be in correct.
This status is then reported to the arming library as an additional arming check, allowing the user to be sure that the
gps is correctly configured before using it. If a user has a GPS2 configured that is not present they will fail the arming
checks until after they have disabled the second GPS.

2 new parameters were introduced as well:
  -GPS_AUTO_CONFIG: Will not request any configuration packets to attempt to change them. (If the packet is recieved then
    a update will be sent to it, but in testing this scenario never occured. This is set to 1 or 0 to change the setting.
    (Defaults to 1 enabling auto config)
  -GPS_GNSS_MODE2: Behaves the same way as GPS_GNSS_MODE but only applies to the second GPS.

GPS drivers are now allowed 2 seconds of non responsiveness before being unloaded
2016-02-12 00:37:04 -08:00
Michael du Breuil 8c9eafeb3c AP_GPS: Fix param docs that had incorrect spaces
The spaces between values aren't stirpped by the autodoc tool that generates the XML files
2016-01-08 20:17:54 +11:00
mirkix dee20a31f1 AP_Notify: Add gps_num_sats 2016-01-07 14:32:56 -02:00
Lucas De Marchi 5bb4e3eda9 AP_GPS: stop using Progmem.h
Besides the trivial convertions, while reading
initblob_state[instance].blob we need to be sure to read only one byte
like we were before.
2015-12-27 15:58:12 -02:00
Andrew Tridgell bc8ee8af36 AP_GPS: added QURT GPS 2015-12-27 16:21:26 +11:00
Michael du Breuil 2f97f9f416 AP_GPS: Fix incorrect values docstring on RAW_DATA 2015-12-03 10:17:22 +09:00
Caio Marcelo de Oliveira Filho c33b86a783 AP_GPS: use millis/micros/panic functions 2015-11-20 12:30:48 +09:00
Jonathan Challinger bc708f9808 AP_GPS: add SAVE_CFG parameter make ublox config saving optional 2015-11-10 15:16:55 +11:00
Lucas De Marchi 1a9b57da1f AP_GPS: remove check for GPS_SKIP_SIRF_NMEA 2015-11-04 12:14:15 +11:00
Lucas De Marchi e31595c60c AP_GPS: remove check for GPS_RTK_AVAILABLE 2015-11-04 12:14:15 +11:00
Lucas De Marchi c75c1d84d9 AP_GPS: remove check for GPS_MAX_INSTANCES
All supported boards may have more than 1 GPS instance.
2015-11-04 12:14:15 +11:00
Lucas De Marchi 5244559010 Minimize AP_Progmem.h includes
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.

In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
2015-10-30 14:35:32 +09:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
2015-10-30 14:35:30 +09:00
Lucas De Marchi a964ac38ec Replace use of print_P() with print() 2015-10-30 14:35:21 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Michael Oborne 8ec9ab6ad3 AP_GPS: add SBF and GSOF to gps documentation 2015-10-06 15:00:46 +11:00
Michael Oborne 0fceb76493 AP_GPS_GSOF: add trimble gsof driver 2015-10-06 15:00:46 +11:00
Randy Mackay f1322252ae GPS: fix GNSS_MODE param descriptions
Thanks to Michael DuBreuil for noticing the problem and providing the correction
2015-09-09 13:40:32 +09:00
Michael du Breuil 9f02834f6d AP_GPS: Broadcast vDOP data over mavlink 2015-09-09 11:38:12 +10:00
Michael Oborne 993904f01c AP_GPS_SBF: add init string and increase union size 2015-09-07 12:11:47 +10:00
Michael Oborne cce46cf0c5 AP_GPS_SBF: add support for Septentrio gps 2015-09-03 19:43:31 +10:00
Randy Mackay 6701d53d49 GPS: add GNSS_MODE parameter bitmask 2015-09-01 12:19:59 +09:00
Andrew Tridgell 2c7a113790 AP_GPS: ensure all GPS drivers give headings as 0..360 degrees
this prevents inconsistency between interfaces, and fixes a MAVLink
reporting bug with UAVCAN GPS
2015-08-31 08:24:35 +10:00
Gustavo Jose de Sousa 67db430583 AP_GPS: standardize inclusion of libaries headers
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
2015-08-11 16:28:43 +10:00
Michael du Breuil c704102dcd AP_GPS: Default the value of hdop to 99.99 if no value has been read yet. 2015-08-04 22:10:02 +09:00
Michael du Breuil 9d53aa77eb AP_GPS: Add reboot required docstring 2015-07-25 10:56:19 +09:00
Michael du Breuil 22b16b4532 AP_GPS: Enable selecting what GNSS system to use if the reciever supports it
Ublox 7 and 8 seires use a UBX-CFG-GNSS message to enable satellite constellations. The default value does not enable any additional ones, and any constellations the reciever doesn't report knowing about are not configured.
2015-07-22 21:31:10 +10:00
Michael du Breuil 47592a1953 AP_GPS: Raise the baud rate on a ublox GPS if using RAW logging
the implementation leaves an easy path forward for providing a different startup blob for all the GPS's if raw logging is enabled
2015-07-22 21:31:09 +10:00
Michael du Breuil 19bb96b9cb AP_GPS: Improve startup logic for detecting what gps is connected
Remove race condition on sending intial blob to the GPS, it was possible to send a blob that got the GPS configured enough to allow the autodetect to take over (and then some drivers like ublox would not finish sending the blob, which has potential details that the driver might have needed to send)

Limit the delay to checking for NMEA gps to only checking after all the available baud rates have been checked

Since a UBlox will actually report having DGPS (due to SBAS or RTCM data) actually report this as the highest supported mode
2015-07-22 21:31:09 +10:00
Randy Mackay 6f72d202fe GPS: fix parameter descriptions 2015-07-21 19:50:12 +09:00
Lucas De Marchi 9d59b43920 AP_GPS: use ARRAY_SIZE macro 2015-07-21 14:24:54 +09:00
Julien BERAUD b32259307d AP_GPS: Add baudrate 230400 for GPS
Needed by bebop gps by default
2015-07-10 10:12:52 +10:00
Randy Mackay ef20676c67 GPS: fix INJECT_TO param desc and add definition
No functional change
2015-06-27 16:31:03 +09:00
Andrew Tridgell f77ffd30f6 AP_GPS: fixed HIL GPS driver to make have vertical velocity sticky 2015-06-17 12:46:56 +10:00
Tom Pittenger 3544549cf4 AP_GPS: Allow switching primary GPS instance with 1 sat difference
Rapid switching between GPS receivers can cause real problems.
Switch if:
1) secondary GPS has 1 more satellite for at least 20 seconds
OR
2) secondary GPS has 2 more satellites for at least 5 seconds

Fixes https://github.com/diydrones/ardupilot/pull/2320
2015-06-11 21:33:06 +10:00
Micheal Knight ee85d37ee2 AP_GPS: added logging of RXM_RAW messages for UBlox
this will allow for post-flight RTK processing of DF logs
2015-05-05 13:25:34 +10:00
Andrew Tridgell f21aa17980 AP_GPS: fixed sending of GPS_RAW_INT with multiple links
thanks to ziltoid2 for this fix! See PR #2132
2015-04-24 08:21:00 +10:00
Niels Joubert a5beef00d1 GPS: Official Swift Binary Protocol GPS Driver v3 for Piksi GPS
DRIVER FEATURES:
- All logic for RTK vs Normal now lives inside Piksi
- Supports observation uplink through telem radio
- Supports full SBP packet logging
- Reports high-rate green blinking to indicate RTK lock.
- Switchable to accept only Float or Integer RTK locks.

THIS REQUIRES PIKSI FIRMWARE v0.14 OR HIGHER
- Uses Piksi's new Pseudo-Absolute-Positioning mode
- Onboard Piksi must have Pseudo-Absolute mode enabled
- Ground Station Piksi must have a surveyed location in settings
- Ground Station Piksi must send its location to Onboard Piksi.

NEXT STEPS REQUIRED:
- EKF needs to take higher accuracy GPS into account
- EKF needs to take GPS RTK height into account
- GCS needs to support sending SBP observation packets
--- MAVProxy patch forthcoming
2015-04-24 08:01:32 +10:00
Randy Mackay 7e43eaafab GPS: TYPE param description to PX4-UAVCAN 2015-04-23 20:17:26 +09:00
Randy Mackay cbcd32d698 GPS: integrate Serial Manager instance 2015-04-01 14:59:20 -07:00
Grant Morphett e7e9e1adf0 AP_GPS: Changes to fix the warnings in rover sitl build.
We are starting the process of resolving all the warnings in the
ardupilot builds of all vehicles and platforms.
2015-02-11 18:16:45 +11:00
Andrew Tridgell 362b53e1da AP_GPS: force flow control off on GPS serial ports 2015-01-29 15:53:20 +11:00
Andrew Tridgell 9ba2fefde3 AP_GPS: update for find_serial() change 2015-01-29 15:37:08 +11:00
Randy Mackay ebf5f98dbd GPS: detect_instance does not set uart rx, tx size 2015-01-29 14:05:12 +11:00
Randy Mackay 2eddecb10d GPS: use SerialManager for init 2015-01-29 14:05:12 +11:00
Andrew Tridgell ef55a3c6a6 AP_GPS: keep reporting GPS status messages when no GPS at 1Hz
to ensure the GCS knows that we have lost the GPS we need to keep
reporting GPS_RAW_INT messages when the GPS disappears. Sending at 1Hz
should be sufficient

Fixes issue #1722
2015-01-02 17:10:23 +11:00
Andrew Tridgell 3354cb37d0 AP_GPS: fixed vertical velocity in Replay
fixed NavEKF use of velocity velocity
2014-12-09 18:57:17 +11:00
Andrew Tridgell d3b087d2c1 AP_GPS: fixed build on non-PX4 platforms 2014-11-14 14:48:42 +11:00
Andrew Tridgell e69582aa1c AP_GPS: added PX4EXPERIMENTAL to GPS type drop down 2014-11-14 14:39:46 +11:00
Holger Steinhaus abad58874c AP_GPS: enable GNSS modules handled by PX4 firmware via GPS_TYPE
GNSS modules handled by PX4 drivers are not auto-detectable, some are not even
connected to a UART port. The activation is therefore controlled by GPS_TYPE
only. Baud rate and port settings (if applicable) have to be handled by the PX4
firmware.
2014-11-14 14:36:10 +11:00
Randy Mackay 8a776f8ff8 GPS: init primary_instance to zero 2014-10-29 12:04:13 +09:00
Benoit PEREIRA DA SILVA 010d267376 GPS: use primary for Notification 2014-10-29 12:04:12 +09:00
Andrew Tridgell 15470bd81b AP_GPS: added GPS_MIN_ELEV parameter
allows setting of satellite elevation mask in degrees
2014-09-04 14:46:10 +10:00
Andrew Tridgell 840a4dee1e AP_GPS: added GPS_SBAS_MODE parameter
allows SBAS to be enabled/disabled
2014-09-04 14:46:10 +10:00
Andrew Tridgell cd50fe82b6 AP_GPS: fixed GPS time in HIL
account for 10 year difference in epoch between unix time and GPS time
2014-09-04 06:37:42 +10:00
Andrew Tridgell b296508da4 AP_GPS: make setHIL take const references 2014-08-09 22:50:15 +10:00
Randy Mackay f630f9abc3 GPS: exclude SIRF and NMEA on APM copter build
This only works for the centralised builder, the modified Arduino IDE
will still include the NMEA and SIRF drivers meaning it will require
approximately 4k additional flash which may push us over the limit on
the APM2.  Users will instead need to exclude other features to get
below the APM1/2 flash limit.
2014-07-13 15:41:11 +09:00
Niels Joubert 2b1169b0ab AP_GPS: SwiftNav RTK Driver and GPS AutoSwitch param 2014-06-30 10:29:56 +10:00
Randy Mackay 69ad632e2a GPS: correct NAVFILTER parameter description
These corrected values match the GPS_Engine_Setting enum in GPS.h
Thanks to Adolfo R for noticing the issue and providing the fix
2014-05-20 22:08:40 +09:00
Andrew Tridgell 3b8839d2f7 AP_GPS: fixed num_sensors on APM2 2014-04-11 21:32:55 +10:00
Andrew Tridgell a821b0e198 AP_GPS: fixed a build warning
Debug() should not be exposed in public headers
2014-04-10 10:28:55 +10:00
Andrew Tridgell 43ebd86bb1 AP_GPS: disable SBP driver on APM2
the driver uses double precision floating point, which can't work on
8bit AVR with gcc
2014-04-05 21:47:46 +11:00
Niels Joubert 33576dfdd9 AP_GPS: Swift Binary Protocol SINGLE-POINT-POSITIONING Driver
This is the SBP driver for Piksi, Lodestar and other forthcoming Swift Navigation GPSes.
This driver currently implements three things:
- Implements a lightweight SBP protocol detection system
- Implements Piksi as a single-point-positioning GPS (same as ublox/others)
- Implements hardware logging of GPS health and baseline messages

Forthcoming iin future updates:
- Need to implement the RTK functionality
2014-04-05 13:42:23 +11:00
Andrew Tridgell 67ed5b73ef AP_GPS: added lock_port() interface
used by SERIAL_CONTROL message
2014-04-05 07:34:33 +11:00
Andrew Tridgell d9d038345a AP_GPS: save 800 bytes of code space on APM2
we can assume a single GPS
2014-04-04 10:08:28 +11:00
Andrew Tridgell 9f857529ca AP_GPS: auto-switch primary GPS based on status and number of satellites 2014-04-04 08:32:34 +11:00
Andrew Tridgell e40a048009 AP_GPS: handle multiple GPS in GPS setHIL() 2014-04-02 07:55:28 +11:00
Andrew Tridgell 79f5618f6f AP_GPS: zero state structure on driver release
this ensures no values are left from the previous driver
2014-04-02 07:55:28 +11:00
Andrew Tridgell 7e2ef0cfc0 AP_GPS: fixed GPS for Replay 2014-04-01 17:25:15 +11:00
Andrew Tridgell 77e2f48581 AP_GPS: fixed notify updates for new API 2014-04-01 06:38:25 +11:00
Andrew Tridgell 9781175bf5 AP_GPS: fixed handling of driver destruction
this allows for more complex destructors, and ensures we don't have
multiple backends allocated at once per instance
2014-04-01 06:38:25 +11:00
Andrew Tridgell 7ceba8dce4 AP_GPS: prevent double allocation of GPS drivers 2014-04-01 06:38:25 +11:00
Andrew Tridgell 0191355488 AP_GPS: fixed init strings to all be in progmem
and sent async ...
2014-04-01 06:38:25 +11:00
Andrew Tridgell 368daf89f1 AP_GPS: new GPS API
This is a complete rewrite of the GPS driver structure, with a static
main driver and separate backend drivers. This will allow proper
support for multiple GPSes, and will allow parameters to be set on the
GPS object
2014-04-01 06:38:23 +11:00