Commit Graph

5824 Commits

Author SHA1 Message Date
Peter Barker 4a251bebbd autotest: fix fly_home_land_and_disarm; wp 7 is never current wp
This is never a current waypoint, so we can't wait for it
2021-03-10 09:12:39 +11:00
Peter Barker 3ddffdab9b autotest: correct wait_current_waypoint timeout behaviour 2021-03-10 09:12:39 +11:00
Randy Mackay 78ddd0512c Tools: autotest for copter spelling fix 2021-03-09 11:49:42 +11:00
Randy Mackay 4abae23306 Tools: disable QuadPlane.GyroFFT autotest 2021-03-08 08:52:05 +09:00
Peter Barker bdeadce95b autotest: improve deadreckoning test
autotest: use location_offset rather than coordinates in Deadreckoning test
2021-03-05 21:34:58 +11:00
Peter Barker 425ab1358a autotest: tidy streamrate handling
Stop setting MAVProxy stream rates; these are neither here-nor-there now as MAVProxy will only modify its own connection's streamrates now

Stop doing the set-streamrate dance to work around MAVProxy's
set_streamrate algorithms.

Remove useless and misleading set of streamrate in Plane test; we reset
streamrates on the reboot immediately following this set.  Considering
the streamrate was never eset this was a good thing.
2021-03-05 21:34:58 +11:00
James O'Shannessy bcc0da9c47 AutoTest: Adds additional autotests to capture mode change while breached
AutoTest: Adds test for fence breach switching to guided mode when no fence return point is present. In upstream, this results in a vehicle fly-away.
2021-03-05 14:52:46 +11:00
James O'Shannessy 269fa5cbe2 AutoTest: Copter remove FENCE_AUTOENABLE tests
Addresses comments made in review, removes the FENCE_AUTOENABLE param for copter.
No param means no tests required.
2021-03-05 14:52:46 +11:00
James O'Shannessy dac5996d93 AutoTest: Fix autotest conflicts after rebase on upstream 2021-03-05 14:52:46 +11:00
James O'Shannessy e16bbe6e18 AutoTest: Ensure fence state is disabled at end of test
This appears to be another case of the fence state carrying over from one test to another. Disabling the fence at the end of the test appears to have fixed this problem
2021-03-05 14:52:46 +11:00
James O'Shannessy 31462418c6 AutoTest: Ensure Copter can RTL and Land even when Fence Floor has not been auto disabled 2021-03-05 14:52:46 +11:00
James O'Shannessy fa7be629e5 AutoTest: Make fence tests flake8 compliant 2021-03-05 14:52:46 +11:00
James O'Shannessy 01b27bdb61 AutoTest: revert change that breaks quadplane 2021-03-05 14:52:46 +11:00
James O'Shannessy 2353b55452 AutoTest: Address race conditions in changes to fence tests 2021-03-05 14:52:46 +11:00
James O'Shannessy 76a2a76b54 AutotTest: Adds autotests for Plane to test RetRally flag added to AC_Fence 2021-03-05 14:52:46 +11:00
James O'Shannessy 8545715837 AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence 2021-03-05 14:52:46 +11:00
James O'Shannessy 6f7ba3b037 AutoTest: Ensure fence is disabled at end of throttle_failsafe_fence test 2021-03-05 14:52:46 +11:00
James O'Shannessy 6251b6eead AutoTest: Rebase and carry across changes from autotest 2021-03-05 14:52:46 +11:00
James O'Shannessy b2346ef6df AutoTest: Adds additional tests to ArduCopter to test autoenable and floor
Adds tests for:
* Testing auto-enable disabled (when no autoenabling of the fence is required)
* Test auto-enabled always after takeoff (when takeoff complete condition met)
* Test auto-enabled disable floor only (when land sequence begins)
* Test auto- on arm/disarm (when vehicle is armed/disarmed)
* Tests ability to land when fence is breached
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas dd5ede0fe0 autotest: small comment improvements 2021-03-05 14:52:46 +11:00
James O'Shannessy bbd606b8b5 AutoTest: Corrections to autotests 2021-03-05 14:52:46 +11:00
James O'Shannessy a3efc9ad98 AutoTest: Fix MAVlite test allowing plane fence to be enabled 2021-03-05 14:52:46 +11:00
James O'Shannessy 47e76a1807 AutoTest: Move fence enable/disable to common location 2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 528defd560 Autotest: activate the fence via a mavlink command
This should not be required in the future, please fix this and revert this commit
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 8d8753b14c Autotest: fix two copter tests after parameter rename
I'm not sure if a better fix would be to remove the set_parameter() call
2021-03-05 14:52:46 +11:00
James O'Shannessy 215901be30 Autotest: Correct the logic for fence based autotest functions
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
James O'Shannessy 1a3e168ced Autotest: Fence is present, but test looking for not present
Autotest: Remove ties to mavlink FENCE_ACTION

Autotest: Add ArduPlane autotest to test ceiling and floor

Adds a test to ensure the vehicle reverts to RTL when breaching a ceiling or floor.

Autotest: Progress the test once we reach takeoff complete and fence enable

Autotest: Use RC_OPTION for Aux Switch functionality

Autotest: Enable fence last
2021-03-05 14:52:46 +11:00
Paul Riseborough d52594c576 Tools: Fix set_home autotest
Don't try to get home until EKF has passed alignment and GPs checks.
Use a more realistic lat/lon offset threshold
2021-03-05 12:10:01 +11:00
Paul Riseborough 0a052d20ea Tools: Add handling for default airspeed variance 2021-03-05 12:10:01 +11:00
Randy Mackay 0a08793b7d Tools: Holybro S500 param file 2021-03-04 14:27:20 +09:00
Peter Barker 4aed767fe9 autotest: add test for MAV_CMD_DO_SET_MISSION_CURRENT 2021-03-04 11:59:33 +11:00
Pierre Kancir 52c5a7c417 Tools: add pretty diff size script 2021-03-03 18:56:55 +11:00
Peter Barker a235246628 autotest: correct units in new AHRS2 test 2021-03-03 18:41:14 +11:00
Pierre Kancir ecc89411f9 Tools: put UART_chargen in skip list 2021-03-03 18:07:38 +11:00
Pierre Kancir 7a5a7b1eb5 CI: add examples test 2021-03-03 18:07:38 +11:00
Andy Piper 46c5d72166 Tools: add bdshot bootloaders for CubeYellow and mRoControlZeroH7 2021-03-03 18:02:26 +11:00
Peter Barker b3ee5d5f59 autotest: increase verbosity in AHRS2 test 2021-03-03 16:29:33 +11:00
Peter Barker 5a49d98555 Tools: have decode_watchdog try to decode from .log dataflash dumps 2021-03-03 13:38:12 +11:00
Randy Mackay a35a7e1523 Tools: autotest manual control test requires 12 deg
adjusted down because of lower default angle_max
2021-03-03 08:03:39 +09:00
Peter Barker 317181922c autotest: ensure we're getting vaguely sane data in AHRS2 message 2021-03-02 20:48:36 +11:00
Peter Barker cc83562add autotest: tidy fence handling 2021-03-02 16:54:06 +11:00
Peter Barker b2d4cefa85 autotest: change heli default RPM type to 10
Change default to SITL
2021-03-02 15:41:44 +11:00
Peter Barker 4d2cf8c95b AP_Frsky_SPort: correct handling of RPM sensor data
Nails support down to just two RPM sensors for the time being.

Simplifies things (there was an issue here when I corrected RPM-in-SITL)
2021-03-02 15:41:44 +11:00
Peter Barker eb499ff731 autotest: improve frsky SPort test
- reduces verbosity as we only check the remaining items when new data
received
 - reduces repoll interval and explains why we need to re-poll
2021-03-02 15:41:44 +11:00
Peter Barker 7b251b6fd4 autotest: add diagnostics for frsky tests 2021-03-02 15:41:44 +11:00
Peter Barker 2671a2f71f autotest: fix up FRSky tests for running under Valgrind 2021-03-02 15:41:44 +11:00
Peter Barker 360512f6b0 autotest: preserve commandline customisations on reboot under valgrind 2021-03-02 15:41:44 +11:00
Peter Barker fc9a93ba67 autotest: stop using mavproxy for clearing missions 2021-03-02 14:24:36 +11:00
Peter Barker 97e2596bf8 autotest: stop clearing mission at start of test
These are implicitly cleared by the framework
2021-03-02 14:24:36 +11:00
Peter Barker 973510a4ff autotest: push context after customising cmdline
doing things in the other order causes problems when running the
complete suite
2021-03-02 14:24:36 +11:00
Peter Barker 5d1e105534 autotest: allow more time for mission upload and download
We upload some rather large missions....
2021-03-02 14:24:36 +11:00
Peter Barker 10007e2e42 autotest: load missions natively rather than using MAVProxy 2021-03-02 14:24:36 +11:00
Peter Barker 993d87469c autotest: move mission upload functions from rover to common 2021-03-02 14:24:36 +11:00
Peter Barker 34a52e9cfe autotest: use wait_statustext in place of mavproxy.expect for autorotate test 2021-03-02 13:34:09 +11:00
Rishabh 6e2339d2d6 Tools: default parameters for Hexsoon TD-650 2021-03-02 10:13:51 +09:00
Peter Barker 0daa1a63d3 autotest: remove pointless fetch_parameters call
And the entire method, replace with equivalent test
2021-03-01 17:27:52 +11:00
nkruzan 3e0f9ab4e7 Tools:autotest\common.py fix text typo 2021-03-01 15:15:38 +11:00
Peter Barker 61138f342a autotest: do not time out receiving of heartbeat if running gdb
pausing indefinitely when running GDB is OK.
2021-03-01 13:44:23 +11:00
Peter Barker 1f47698076 autotest: use change_mode in place of mavproxy.send 2021-03-01 13:10:09 +11:00
Andrew Tridgell 97e7b48ca1 Tools: rebuild DrotekP3Pro bootloader 2021-02-28 17:24:25 +11:00
Andrew Tridgell 0528414a9c AP_Bootloader: limit the 1M flash check to the F427
this fixes an issue with the DrotekP3Pro which uses the STM32F469
2021-02-28 17:24:25 +11:00
Andrew Tridgell b137f9e319 waf: fixed embed error on python2 2021-02-26 10:59:09 +11:00
bugobliterator 6d25b02508 waf: need to crc the padded bootloaders before embedding 2021-02-26 10:59:09 +11:00
Peter Barker d3b3c443bc autotest: reset copter completely after autotune test 2021-02-25 10:49:58 +11:00
Andrew Tridgell 98abe125ad Tools: rebuild IO firmware
we now have enough memory again
2021-02-24 18:21:08 +11:00
Peter Barker 013415eb31 autotest: make and mark arducopter.py as flake8-compliant 2021-02-24 15:10:10 +11:00
Andrew Tridgell b012c472e1 waf: added crc to embedded data 2021-02-23 20:20:07 +11:00
Peter Barker 79f21ed639 autotest: add test for GSF logging 2021-02-23 12:36:33 +11:00
Peter Barker 9d681eecc4 autotest: move to state outside when we leave log structure
No vertical whitespace allowed in the structures...

We concatenate all of the LogStructure files; without this we remain in
state_inside and try to parse every line in the concatenation as if it
were a log structure definition
2021-02-23 12:36:33 +11:00
Andrew Tridgell 20da92c8a1 Tools: revert IO firmware
this is a temporary fix until the full cause of the IOMCU issue is
found
2021-02-22 19:52:05 +11:00
Peter Barker 4d9cfdaaa8 Vagrant: create a bionic64-desktop VM
The focal-desktop appears to have a problem where directories are
considered to be in-use when being deleted. Not reproduced by me, but
reliably by a Windows user.
2021-02-22 15:00:38 +11:00
Andy Piper fa1bed9735 Tools: rebuild iomcu firmware 2021-02-22 07:07:43 +11:00
Peter Barker 44ec74030e autotest: recover from flip in althold to remove stabilise throttle problem 2021-02-21 23:11:26 +11:00
Peter Barker a4a5d52c35 autotest: extend time allowed for RTL for simplemode test 2021-02-21 22:45:06 +11:00
Peter Barker 9120882e9e autotest: print name of open dataflash log when test exception caught
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.

Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker adf44f3b2b autotest: make and declare sim_vehicle.py flake8-clean 2021-02-21 21:35:17 +11:00
Peter Barker 98451e499a autotest: make and declare balancebot flake8-clean 2021-02-21 21:35:17 +11:00
Peter Barker b5f490aff4 autotest: make fly_proximity_avoidance_test_alt_no_avoid more reliable 2021-02-21 17:44:10 +11:00
Andy Piper 94de238751 AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu. 2021-02-20 14:37:11 +11:00
Peter Barker d4aef2dba8 autotest: stop using MAVProxy to change mode 2021-02-20 00:03:24 +11:00
Peter Barker 05c9b79a5e autotest: make and declare quadplane.py flake8-clean 2021-02-20 00:02:33 +11:00
Peter Barker c13d229877 autotest: use self.set_current_waypoint rather than "wp set" to set current wp 2021-02-19 12:25:40 +11:00
Peter Barker 148e2e751f autotest: add set_current_waypoint 2021-02-19 12:25:40 +11:00
Peter Barker b7044d3708 autotest: remove use of global expect_list 2021-02-18 18:18:30 +11:00
Peter Barker 2d17f019b6 autotest: remove pointless manipulation of expect list
start_sitl and start_mavproxy already do this stuff
2021-02-18 18:18:30 +11:00
Peter Barker dcc04ccd09 autotest: stop using MAVProxy to change modes 2021-02-18 17:38:52 +11:00
Peter Barker 2c1df16442 autotest: increase button message timeout to allow for Valgrind speed 2021-02-18 17:04:16 +11:00
Peter Barker ad06a616b8 autotest: adjust for low log transfer rate under valgrind 2021-02-18 17:04:16 +11:00
Peter Barker bcc1cb9dbb autotest: use get_parameter in place of mav's param object
This is the only place in the code that does this
2021-02-18 15:06:26 +11:00
Peter Barker b1ccf3b3f8 autotest: add test for rangefinder-based proximity avoidance enablement 2021-02-18 15:05:51 +11:00
Peter Barker 3cf1b9444f autotest: get_sim_time_cached in NMEA output test to stop losing msgs 2021-02-18 11:26:22 +11:00
Peter Barker ce61f44505 autotest: reset SITL commandline after fetching unhidden parameters
this makes a difference under Valgrind, which has to reboot slightly differently to normal SITL
2021-02-18 11:26:22 +11:00
Peter Barker e221e6ce45 autotest: flake8 compliance for ardusub.py 2021-02-18 10:43:05 +11:00
Peter Barker 628a3843b2 autotest: flake8 compliance for arduplane.py 2021-02-18 10:43:05 +11:00
Peter Barker 78aa729b90 autotest: flake8 compliance for common.py 2021-02-18 10:43:05 +11:00
Peter Barker 4c56ac7eb3 autotest: flake8 compliance for antennatracker.py 2021-02-18 10:43:05 +11:00
Peter Barker 726f54e37f autotest: flake8 compliance for rover.py 2021-02-18 10:43:05 +11:00
Peter Barker 360e2f49b3 Tools: git-tools: add a script suitable for use as a pre-commit hook 2021-02-18 10:43:05 +11:00
Peter Barker e3887c8d93 autotest: make and mark autotest.py flake8-clean 2021-02-18 10:43:05 +11:00
Peter Barker 3c83d52e52 Tools: add script to check Python files for flake8-cleanliness 2021-02-18 10:43:05 +11:00
Andy Piper 7aa1e2d63b waf: add AP_VideoTX module 2021-02-17 18:23:33 +11:00
Peter Barker 33fee211a4 autotest: extend pexpect timeouts when running under Valgrind 2021-02-17 18:16:04 +11:00
Peter Barker a292fe1b8b autotest: use wait_statustext rather than mavproxy.expect
This is important when running under Valgrind as the text can be
significantly delayed.  wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
2021-02-17 18:16:04 +11:00
Peter Barker c00a82868e autotest: make DLVR sole airspeed sensor in test
The test wasn't actually *using* the DLVR...
2021-02-17 14:23:07 +11:00
Peter Barker dbdda65956 autotest: add basic test for GPS blending 2021-02-17 11:30:01 +11:00
SSGrady 82a84c8f35 Tools: added name to GIT_Success.txt 2021-02-16 12:42:10 -08:00
Peter Barker 1ca0998f32 Tools: take MAV_CMD_DO_SPRAYER as a mavlink command 2021-02-16 22:36:43 +11:00
Peter Barker b14dcf4bae Tools: add mission command to turn sprayer on and off 2021-02-16 22:36:43 +11:00
Peter Barker be8f747b7a autotest: adjust timeout for Valgrind; disable for gdb 2021-02-16 13:18:41 +11:00
Andrew Tridgell ee8e9e3289 waf: fixed handling of vehicle dependency check for abs paths
this fixes the use of vehicle dependent cpp files on the build server
2021-02-15 07:23:33 +11:00
Peter Barker 3c3db50843 Vagrant: augment bash when working in a git repository
This .bashrc_git originally came from tridge.
2021-02-14 09:57:26 +11:00
Peter Barker ca49f62b6d autotest: add test for Plane's RTL_CLIMB_MIN parameter 2021-02-13 19:34:52 +11:00
Peter Barker e4d5a92721 autotest: add wait_distance_to_nav_target method 2021-02-13 19:34:52 +11:00
Peter Barker d60fa86026 autotest: use set_map_from_rc more 2021-02-13 19:34:52 +11:00
Peter Barker a5706a18af autotest: handle Py2 not having ConnectionResetError built in 2021-02-12 18:24:18 +11:00
Michael du Breuil 50d80e9dc4 AP_Periph: Remove debug printf 2021-02-12 14:51:09 +11:00
Willian Galvani e5844b7753 Frame_params: Sub: make RNGFND1_TYPE 0 (None)
This was causing issues in QGC 4.1 as it was showing an unhealthy
Rangefinder and marking the vehicle as "not ready to fly".
It will be up to the companion computer to set this to 10(Mavlink)
2021-02-11 10:43:50 -08:00
Peter Barker 5e3caefc2d Vagrant: make ptrace permissive to allow stack dumping 2021-02-11 17:22:48 +11:00
Peter Barker 4020308d40 Vagrant: add desktop to Vagrant 2021-02-11 09:58:53 +11:00
Iampete1 904b493809 Tools: autotest, common.py remove extra comma 2021-02-11 09:20:15 +11:00
Pierre Kancir 8396388af9 Tools: run_examples: add FlashTest to skip list 2021-02-10 18:49:42 +11:00
Peter Barker 4324d66c13 autotest: loosen time constraint on mavlink messages in magcal
Saw an error where we didn't get one of these in 5 seconds.

That sounds like too much.  But we'll loosen the constrain anyway
2021-02-10 09:28:45 +11:00
Peter Barker bd8384b322 autotest: break out a get_altitude method 2021-02-10 09:28:25 +11:00
Alessandro Apostoli e2aaf4c216 Tools: autotest, fix for frsky not defined error (#4) 2021-02-10 09:27:58 +11:00
Peter Barker d9dd93bcdd autotest: don't run frsky tests armed for the most part 2021-02-10 09:27:58 +11:00
Peter Barker 742d5a9fa0 autotest: add body_frame_velocity 2021-02-08 22:44:32 +11:00
Peter Barker 164da261f1 Tools: initvagrant: install missing cmake so we can build jsbsim 2021-02-07 08:22:28 +11:00
Andrew Tridgell b113fe15ab Tools: added MatekH743-periph to autobuild 2021-02-05 20:13:36 +11:00
Randy Mackay f20fc28a85 Tools: param files to ease SITL setup of GPS-for-yaw 2021-02-05 17:22:27 +09:00
Randy Mackay a09bdcdda1 Tools: default param file to ease using copter SITL with vicon 2021-02-04 20:21:00 +09:00
Peter Barker 567e9733b6 autotest: augment bisect-helper.py to help with flapping tests
- option to allow for a string which must be present in the outout
 - option for strings which must not be present in the output
 - repeat option so test must pass many times
 - elaborate diagnostic output
 - option to run under Valgrind (to provoke races)

The output from each test run is poked into a directory in /tmp

The number of runs a test took to fail is poked into a different file in /tmp, helping to tune the --autotest-test-passes parameter
2021-02-04 16:22:28 +11:00
Peter Barker c2e310d75f autotest: add test for OBSTACLE_DISTANCE_3D message 2021-02-04 15:50:45 +11:00
Peter Barker 393ec5d6f7 autotest: add test for MAVProxy proximity sensor 2021-02-04 12:03:35 +11:00
danlaks d244f22522 Tools: AP_Bootloader: Add AP_HW_SWBOOMBOARD_PERIPH identifier
SpektreWorks Boom Board AP_Periph device
2021-02-04 08:37:32 +11:00
Andrew Tridgell 699e61da57 Tools: auto-build new matek boards 2021-02-03 19:05:12 +11:00
Andrew Tridgell 4a178d5c44 Tools: added new Matek bootloaders 2021-02-03 19:05:12 +11:00
Andy Piper 553425f994 Scripts: add bi-directional dshot firmware to built binaries 2021-02-03 18:49:06 +11:00
Andy Piper 49f0ba058c Bootloaders: add bi-directional dshot bootloaders 2021-02-03 18:49:06 +11:00
Michel Pastor 7ad6dd858b ChibiOS: update SuccexF4 bootloader 2021-02-03 18:37:46 +11:00
Peter Barker cdaff74948 autotest: stop trying to arm in QRTL 2021-02-03 18:22:10 +11:00
Peter Barker f65bee80dc autotest: use BATTERY_STATUS to detect sub reboot
Sub doesn't implement AP_Stats so we have custom reboot detection for
it.

The current look-for-string strategy is flawed - we're missing the
string on reboot
2021-02-03 13:58:17 +11:00
Andrew Tridgell e86e3333a5 Tools: updated KakuteF7 bl 2021-02-03 13:13:32 +11:00
Pierre Kancir e13a35abc1 Autotest: check for empty message before trying to use it 2021-02-03 12:56:01 +11:00
yaapu bb576a49b8 Tools: added autotest for frsky rpm telemetry 2021-02-03 12:49:38 +11:00
Michael du Breuil 15ce4fb034 AP_Periph: Use the ArmingStatus broadcast to set the soft_armed state
This allows things like GPS_RAW_DATA 2 to start to work for SBF GPS's
2021-02-02 10:57:57 +11:00
Samuel Tabor d1578e5ba2 autotest: Update soaring default params in line with specified SOAR_THML_BANK. 2021-01-29 11:20:09 -08:00
Andrew Tridgell 6bc4e995a4 CI: build CubeOrange-periph
this ensures H7 based peripherals (which are getting more common)
don't break
2021-01-27 18:24:03 +11:00
Pierre Kancir c02dfd1214 Autotest: add EndMissionBehavior Test for rover 2021-01-27 08:23:52 +09:00
Andrew Tridgell bb278a1cc7 Tools: allow tempcal_IMU.py to run without existing tcal params
this makes it possible to run the tcal script on a log from a board
that doesn't have any existing temperature calibration params
2021-01-27 09:49:35 +11:00
Pierre Kancir 2b71bf8e99 Autotest: fix subtests completion 2021-01-27 08:27:54 +11:00
Andrew Tridgell 49e2a0caed Tools: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell d47afb2406 autotest: added AHRSTrim test and add trim to accel cal test
this ensures the handling of AHRS trim is correct
2021-01-25 16:24:50 +11:00
Andrew Tridgell 3c825bdffc waf: make AP_NavEKF3_core.h a vehicle dependent include 2021-01-24 11:56:52 +11:00
Peter Barker ad2ab333f9 Tools: autotest: allow autotest to connect directly to SITL 2021-01-24 09:25:45 +11:00
Peter Barker 8c7d63433c autotest: clear mission ourselves rather than with MAVProxy at end of test 2021-01-24 09:25:45 +11:00
Peter Barker 30836535d0 autotest: retry dynamic notch test up to 3 times 2021-01-22 11:17:42 +11:00
Pierre Kancir 805493c854 ardupilotwaf: use dynamic generation for ap_periph board name 2021-01-22 05:42:12 +11:00
Siddharth Purohit c54a597571 AP_Periph: pull out supported targets from wscript into a separate file 2021-01-22 05:42:12 +11:00
Peter Barker 2e2e34d784 autotest: correct run_one_test case (vehicle.testname case) 2021-01-21 22:59:34 +11:00
Peter Barker 1fec88af21 autotest: make arming test a little more verbose 2021-01-21 22:15:16 +11:00
Peter Barker 281296832a autotest: retry GyroFFTHarmonic test on failure 2021-01-21 16:45:34 +11:00
Peter Barker 3279400e2e autotest: disarm_with_rc_input shortcuts if it sees rudder-disarm-disabled 2021-01-21 14:25:47 +11:00
Peter Barker f452c6bb51 autotest: break out a statustext_in_collections method from wait_statustext 2021-01-21 14:25:47 +11:00
Andrew Tridgell 3add045924 autotest: fixed accel/gyro threshold consistency for tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell fe7d933976 autotest: use delay_sim_time() in tempcal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell af18e0c755 Tools: review fixes 2021-01-21 13:09:21 +11:00
Andrew Tridgell 58b9cd2c6e autotest: added assert_reach_imu_temperature() abstraction 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5a5ba26468 autotest: expanded accelcal test to check values
this checks the resulting accelcal is correct within 1%
2021-01-21 13:09:21 +11:00
Andrew Tridgell 3e640eed80 autotest: changes for per-IMU biases and scaling 2021-01-21 13:09:21 +11:00
Andrew Tridgell c96e61c0e1 Tools: review fix 2021-01-21 13:09:21 +11:00
Andrew Tridgell 4c315b57ca autotest: run gyro/accel cal at non-reference temperature 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5a180fa7a8 Tools: cope with offset from cal temp to reference temp 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2359a5a1ea Tools: fixed stopping of capture on enable change in tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2cf7e7945c autotest: make tempcal debug output clearer 2021-01-21 13:09:21 +11:00
Andrew Tridgell 6254787c26 Tools: fixed tempcal for when we have gyro cal but no accel cal 2021-01-21 13:09:21 +11:00
Andrew Tridgell e87dbacee7 Tools: switch to fixed reference temperature of 35C 2021-01-21 13:09:21 +11:00
Andrew Tridgell a96b6336b8 Tools: changes from review feedback 2021-01-21 13:09:21 +11:00
Andrew Tridgell 84dda13b42 autotest: use new learn param setup 2021-01-21 13:09:21 +11:00
Andrew Tridgell e8ab8ed29e Tools: improve tempcal script
- allow display of log corrections
 - added online estimator
 - allow learning using TCLR records
2021-01-21 13:09:21 +11:00
Andrew Tridgell 30385fb8cb autotest: use set_parameters() in IMU temp cal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 0c3655b01f autotest: fixed epsilon handling in set_parameters 2021-01-21 13:09:21 +11:00
Andrew Tridgell 327db46c15 autotest: added automatic testing of IMU Temperature calibration 2021-01-21 13:09:21 +11:00
Andrew Tridgell c4664d8e32 Tools: added script to calculate IMU temp compensation parameters
this is run over an onboard log to calculate the INS_TCAL parameters
to enable temperature compensation for gyro and accel
2021-01-21 13:09:21 +11:00
Peter Barker c7a6047904 autotest: add option to retry tests / create and use Test definition object 2021-01-21 10:23:17 +11:00
Peter Barker 03b2473c61 autotest: correct get_parameter_direct attempts decrement 2021-01-20 20:06:46 +11:00
bugobliterator 9e15b5785b ardupilotwaf: fix spec args as distcc doesn't like it 2021-01-20 19:21:14 +11:00
Andrew Tridgell 7e89c05204 autotest: fixed --tracker option to sim_vehicle.py 2021-01-20 11:11:47 +11:00
Andrew Tridgell bd9dd7ff4c Tools: added vnav linux target 2021-01-20 10:06:45 +11:00
Andrew Tridgell c396d15890 Revert "autotest: ensure defaults files don't set already-default-values"
This reverts commit 3d431cd4f1.

It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
2021-01-20 08:54:43 +11:00
Peter Barker 04a52835c0 autotest: correct Rover set-position-target-global-int test
The vehicles doesn't send us set messages!
2021-01-19 21:16:39 +11:00
Peter Barker 1cb86303b4 Tools: add test for maxbotixi2cxl 2021-01-19 11:20:47 +11:00
Iampete1 5e00f5ae48 Tools: ardupilotwaf: ap_library: add genrated bindings to whitle list and add support for ends with whitle listing 2021-01-19 11:18:10 +11:00
Iampete1 8d7299d052 Tools: ardupilotwaf: ap_library.py: allow vehicle in build/ 2021-01-19 11:18:10 +11:00
Peter Barker 8eb670d685 autotest: trim default values from rover defaults files 2021-01-19 10:34:00 +11:00
Peter Barker 3d431cd4f1 autotest: ensure defaults files don't set already-default-values
autotest: mark some vehicles as having external physics models

autotest: add default_params_filename to some vehicle info
2021-01-19 10:34:00 +11:00
Peter Barker 7d86cc08ad autotest: correct SITL commandline for no default parameter file 2021-01-19 10:34:00 +11:00
Peter Barker 8f9d3909f1 autotest: model_defaults_filepath always returns a list 2021-01-19 10:34:00 +11:00
André 30eed3103b sim_vehicle fix 2021-01-19 06:30:12 +11:00
Peter Barker 210b0e7c5f autotest: stop emitting port 14550 all the time
this can confuse other things going on on the same machine.  It is still
available by specifying --viewerip if desired
2021-01-18 21:46:43 +11:00
Peter Barker 30929e7f1a autotest: add verbose option to assert_sensor_state 2021-01-18 21:25:58 +11:00