Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
12,842 Commits 71 Branches 509 Tags 717 MiB
Commit Graph

907 Commits

Author SHA1 Message Date
Robert Lefebvre 23ea151ca5 TradHeli: Fix Heli rate controller filter rates. 2013-07-19 16:16:10 +09:00
Robert Lefebvre b4863dc997 TradHeli: Change to throttle controller to allow swash plate collective to move, even if disarmed, if we are in Acro or Stab. This is slightly dangerous... as a user could cause a problem if they do not follow the proper usage procedures. If they do not route the ESC through the APM, but instead direct to Rx. And then if they do not Arm, they could take off in Stab mode while disarmed, but then when they switch to Alt_Hold, it will drop the collective to the bottom and they will fall. This can be saved by switching back to Stab. And it requires operation outside of the normal operating procedure. 
This change is being made because most heli users expect to be able to check the swash plate operation before arming and taking off.
 2013-07-19 16:16:04 +09:00
Andrew Tridgell 9a159a5e23 Copter: make wp_distance static 
removed hack with AP_Camera library
 2013-07-15 09:56:45 +10:00
Leonard Hall 64ce9b017d Copter: Body frame ACRO upgrade 2013-07-11 17:53:25 +09:00
Randy Mackay 6dd446ac79 Copter: firmware version to 3.0.1 2013-07-11 16:45:05 +09:00
Andrew Tridgell 5ae62f4f04 Copter: fixed build with specified GPS driver 2013-07-11 14:27:42 +10:00
Randy Mackay 8cb7bd628e Copter: change firmware version to 3.0.1-rc2 2013-07-10 15:52:21 +09:00
Andrew Tridgell da4137b731 Copter: changes for GPS field changes 2013-07-10 14:04:22 +10:00
Craig@3DR bbd4fbd2fb Copter: trigger + logging on camera update_location() 2013-07-10 08:39:59 +10:00
Randy Mackay 79d2fe6271 Copter: double flash arming light when pre-arm checks fail 
Hardly my finest work but it's temporary because we're going to replace
all the led, buzzer etc with a library called AP_Notify in the near
future.
 2013-07-04 16:26:22 -10:00
Randy Mackay 404cd5f3da Copter: rename g.pid_throttle to g.pid_throttle_rate 
Small code clean-up to make throttle rate controller's pid more obvious
 2013-06-30 00:04:21 -10:00
Randy Mackay b3da8a462f Copter: CH6 tuning definition clean-up 
Renamed and reorganised the CH6 #defines and parameter definitions
 2013-06-29 23:51:43 -10:00
Randy Mackay 0592475959 Copter: change firmware version to 3.0.0-rc1 2013-06-26 14:03:28 +09:00
Randy Mackay 45dfbecaba Copter: update 3.0.1 version and release notes 2013-06-26 00:09:36 +09:00
Andrew Tridgell 3e82f644ea Copter: enabled CAM_TRIGG_DIST parameter 2013-06-25 12:52:44 +10:00
Randy Mackay 245bc3d3fd Copter: show pilot input in dataflash ATT message even when in AUTO 
AUTO mode ignores pilot input but we still want to be able to see the
pilot's input in the Roll-In and Pitch-In columns of the dataflash's ATT
message
 2013-06-19 12:37:13 +09:00
Randy Mackay b1a014e12e Copter: update firmware version to 3.0.0 2013-06-18 10:03:40 +09:00
Randy Mackay b1e089fe29 Copter: update AC3.0-rc6 version and release notes 2013-06-16 11:48:03 +09:00
Randy Mackay dd92a2ba07 Copter: AC3.0-rc5 version and release notes 2013-06-04 15:25:56 +09:00
Andrew Tridgell ba959fd594 Copter: remove unused define 2013-06-04 10:36:34 +10:00
Andrew Tridgell 595d3c694a Copter: make it possible to change board orientation at runtime 2013-06-03 16:52:52 +10:00
Randy Mackay 213eaa8db6 Copter: integrate draft RCMapper 2013-06-03 16:23:47 +10:00
Randy Mackay 9e91def774 Copter: update firmware version and release notes 2013-06-02 12:19:36 +09:00
Dr Gareth Owen 4c6d6ea96e changed yaw reset to when armed to not use initial_simple_bearing 2013-06-02 11:29:30 +09:00
Randy Mackay 99f5462a03 Copter: circle mode fixes 2013-06-01 18:21:30 +09:00
Randy Mackay 1722e438d8 Copter: pass alt hold gain to WP_Nav library 2013-05-31 21:04:10 +09:00
Randy Mackay 838fb3f4e2 Copter: don't spin motors in ALTHOLD with zero throttle 2013-05-27 10:42:22 +09:00
Dr Gareth Owen 1aca66460e 7 yaw when armed option changed so overridable by user 2013-05-24 11:14:06 +09:00
Randy Mackay 22e9b95c3c Copter: version update to 3.0.0-rc3 2013-05-22 17:46:28 +09:00
Randy Mackay 00bd1bf8ea Copter: RESETTOARMEDYAW order and comments 
We should keep the order in the case statement the same as the #define
order.
 2013-05-21 10:58:34 +09:00
Dr Gareth Owen f646b79e5f indent correct again 2013-05-21 10:40:36 +09:00
Dr Gareth Owen d9fc37c01c indent correct 2013-05-21 10:40:34 +09:00
Dr Gareth Owen e9d640ced8 added ch7 option to reset yaw back to what it was when quad was armed 2013-05-21 10:40:30 +09:00
Randy Mackay 6efdabb104 Copter: move auto disarm into a separate function 2013-05-20 14:05:50 +09:00
Randy Mackay 1dbe98b566 Copter: display reason for pre-arm-check failures in GCS 2013-05-20 13:03:18 +09:00
Randy Mackay 55f1b3b2ae Copter: reorganise medium loop 
Shifted compass logging to happen when compass is read.
Updated comments.
 2013-05-20 11:18:51 +09:00
Randy Mackay c840e2a8c2 Copter: code clean-up move 10hz loop after 50hz loop 2013-05-20 11:05:14 +09:00
Randy Mackay 38239c652a Copter: ch8 aux switch 
Ch8 can be used as an aux switch like ch7.  Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
 2013-05-17 14:42:28 +09:00
Randy Mackay 19394918dd Copter: simplify APM_Config.h 
Remove items that can be more easily set with parameters
 2013-05-17 12:01:39 +09:00
Randy Mackay 9d0f40b432 Copter: add pre_arm_rc_check 
Motors are not be enabled unless we have passed rc checks which include
checking the radio in calibration has been performed.
 2013-05-16 16:32:00 +09:00
Randy Mackay 33d1129904 Copter: remove unused TB_RATIO parameter 2013-05-14 16:56:55 +09:00
Randy Mackay 319f3ef560 Copter: flexible CH6 declination tuning range 2013-05-13 23:37:30 +09:00
Randy Mackay 6ba9431be4 Copter: update firmware version and release notes ahead of -rc2 2013-05-13 22:16:25 +09:00
Andrew Tridgell c44fd42349 Copter: fixed RSSI reading on PX4 
needed for different analog input scaling
 2013-05-13 15:19:05 +10:00
Randy Mackay ad656c7e8a Copter: allow lat/lon to be specified for land 2013-05-10 22:37:15 +09:00
Randy Mackay b65d714675 Copter: set yaw-mode in do_loiter mission command 2013-05-10 10:51:46 +09:00
Randy Mackay ed5ddfd9db WPNav: initialise desired roll, pitch 
bug-fix to resolve 1/10th second twitch when loiter or waypoint
controller are first engaged
 2013-05-09 18:32:02 +09:00
Randy Mackay 0a148cce19 Copter: log target alt in meters 2013-05-08 16:41:16 +09:00
Randy Mackay ae2ad8e819 Copter: remove unused radius_of_earth constant 2013-05-05 13:13:48 +09:00
Randy Mackay 647a93e78e Copter: remove jerk when entering RTL or AUTO 
Loiter target position was not being initialised properly.
Add a few more comments
 2013-05-03 16:58:00 +09:00
Randy Mackay cca05ee8ae Copter: start dataflash logging when arming 
Stop nearly empty logs from being produced.
Removed redundant armed bit from ap state.
 2013-05-03 14:49:55 +09:00
Andrew Tridgell 55da049c69 Copter: fixes for AP_Baro_HIL 2013-05-02 15:09:16 +10:00
Andrew Tridgell 25c576cad7 Copter: replaced constrain() with constrain_float() 2013-05-02 10:26:49 +10:00
Randy Mackay d9601916ee Copter: update firmware version and release notes for 3.0.0-rc1 2013-05-01 17:53:11 +09:00
Randy Mackay 3aca35777f Copter: use mavlink fence message 
Note: we should consider moving this send via mavlink into the fence
library
 2013-05-01 17:06:58 +09:00
Randy Mackay bab9fa25e5 Copter: add GCS failsafe 2013-04-29 21:30:22 +09:00
Randy Mackay 76d0f7f74d Copter: fix compiler warning re unused float_int 2013-04-28 17:22:58 +09:00
Randy Mackay d146d6aaa6 Copter: restore update_altitude to run at 10hz 2013-04-28 17:15:13 +09:00
Randy Mackay 58d1da2d80 Copter: integrate AC_Fence in place of limits 
Lesser functionality than limits but saves more than 150 bytes and it
works
 2013-04-27 11:14:07 +09:00
Andrew Tridgell 300a8d2bbc Copter: support all 12 channels on PX4 
last 4 channels are on the FMU pins
 2013-04-25 20:10:53 +10:00
Randy Mackay 74dca6da22 Copter: move update_commands to run_autopilot fn 
update_commands was being run in the medium_loop counter but it is
easier to understand the flow of the code if it is consolidated along
with other autopilot calls.
 2013-04-24 20:59:49 +09:00
Andrew Tridgell 5ad9deecfb Copter: cleanup some bit if tests to be clearer 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-04-23 23:03:34 +10:00
Randy Mackay 63a48f76e2 Copter: add pre-arm check of radio and accel 
Only checks throttle channel and accelerometer scaling
 2013-04-23 00:01:20 +09:00
Andrew Tridgell d5875676b1 Copter: use a reference to DCM matrix 2013-04-22 13:26:49 +10:00
Randy Mackay 2fc25da4c3 Copter: Leonard's fix for get_loiter_accel_to_lean_angle 2013-04-21 16:27:50 +09:00
Andrew Tridgell c53ede506d Copter: make if statement clearer 2013-04-21 07:25:52 +10:00
Andrew Tridgell 8b31f276a2 Copter: switch to block based logs for SITL 2013-04-20 20:45:51 +10:00
Randy Mackay a53e5f747b Copter: add fourth yaw behaviour, look-at-home 
Added get_wp_yaw_mode to remove duplication of checks of the
WP_YAW_BEHAVIOR parameter
 2013-04-20 15:36:24 +09:00
Andrew Tridgell 02c3083f60 Copter: print flight mode as string 2013-04-20 15:18:22 +10:00
Andrew Tridgell 67484a2ea1 Copter: make copter code compatible with the new logging system 
not fully converted yet
 2013-04-20 13:52:36 +10:00
Randy Mackay 37abfdc65a Copter: make CIRCLE_RATE a tunable parameter 
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
 2013-04-20 12:03:55 +09:00
Randy Mackay f5955d8915 Copter: auto climb and descent params removed 
These params now reside in the AC_WPNav library
 2013-04-18 14:52:21 +09:00
Randy Mackay 2b4a7d60a9 Copter: remove unused throttle modes 
These were useful for testing the alt-hold when it was first introduced
but now they just add complexity
 2013-04-17 22:14:22 +09:00
Randy Mackay 56809a9df2 Copter: remove unused nav_ok and alt_sensor_flag 2013-04-17 21:57:57 +09:00
Randy Mackay d2bd818b2d Copter: bug fix for auto_armed logic 
Zero throttle when switching into an auto flight mode would cause the
motors to stop.
 2013-04-17 21:28:42 +09:00
Andrew Tridgell 501eb4f0b4 Copter: made more variables static 2013-04-17 21:35:11 +10:00
Randy Mackay a185fa950c Copter: Jason's fix to auto disarming 
Added check so that it only starts counting down when motors are armed.
This removes the issue in which the copter sometimes disarms shortly
aftering being armed.
 2013-04-15 23:36:45 +09:00
Randy Mackay b48864e1ad Copter: allow CH6 tuning of compass declination 2013-04-15 21:50:44 +09:00
Randy Mackay 629d23b7e2 Copter: remove WP_SPEED and WP_RADIUS parameters 
AC_WPNav library has equivalent params with very similar names
 2013-04-14 13:27:37 +09:00
Randy Mackay bffe4fa412 Copter: remove NAV_LAT and NAV_LON 
Loiter and navigation controllers now combined
 2013-04-14 12:09:45 +09:00
Randy Mackay 1ee825ee9a Copter: move alt and wp checking to AC_WPNAV 
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
 2013-04-14 10:39:23 +09:00
Randy Mackay bc87118062 AC_WPNav: add get_target_alt method 2013-04-14 10:39:00 +09:00
Randy Mackay 6dbcbdcb43 AC_WPNav: limit max loiter position error 
move interpretation of pilot input to wpnav lib
 2013-04-14 10:38:58 +09:00
Randy Mackay 926c404994 AC_WPNav: Leonard's loiter target smoothing 2013-04-14 10:38:39 +09:00
Randy Mackay 553f40a99c Copter: bug fix to loiter delay 
change delay to seconds to allow delays longer than 65seconds
 2013-04-14 10:38:30 +09:00
Randy Mackay 4de5f67a91 Copter: replace wp_nav.get_target_alt with get_destination_alt 2013-04-14 10:38:17 +09:00
Randy Mackay 5b93990e41 Copter: removed next_WP 
Use the wp_nav.get_target_alt or controller_desired_alt in it's place
 2013-04-14 10:38:07 +09:00
Randy Mackay 1516972eaa Copter: add panorama to CIRCLE mode 
Yaw will slowly rotate if CIRCLE_RADIUS is set to zero
Circle center is projected forward CIRCLE_RADIUS from current position
and heading
 2013-04-14 10:38:01 +09:00
Randy Mackay 58ed8cd544 Copter: replace set_next_WP with direct call to wp_nav 2013-04-14 10:37:55 +09:00
Randy Mackay 49828eba7d Copter: integrate AC_WPNav 2013-04-14 10:37:48 +09:00
Randy Mackay 3bf847f675 Copter: Jason's faster cos_yaw, sin_yaw 2013-04-02 15:50:29 +09:00
Randy Mackay 7ccb14344c Copter: update version to 2.9.1b-dev 2013-04-01 11:47:56 +09:00
Michael Oborne 59f80410d5 Add ability to compile sensor hil with sitl 2013-03-31 16:35:23 +08:00
Andrew Tridgell b280857025 Copter: use common angle wrap code 2013-03-29 13:14:31 +11:00
Randy Mackay f7d977fe37 Copter: add support for GPS fix type 2D 2013-03-27 11:41:47 +09:00
Randy Mackay 597a4b912a Copter: fix to allow building HIL_MODE_SENSORS 2013-03-18 13:41:52 +09:00
Randy Mackay 61e29173e3 Copter: remove unused crosstrack variables and parameters 
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
 2013-03-17 16:46:31 +09:00
Randy Mackay fdcb78ccf7 Copter: leonard's smoother alt-hold transition 
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
 2013-03-17 13:24:49 +09:00
Randy Mackay 150046f2b8 Copter: GPS Failsafe implemented 
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
 2013-03-16 17:27:46 +09:00
Randy Mackay f9539384a1 Copter: rename failsafe to failsafe_radio 
Makes way for separation of failsafes for throttle, gps and gcs
 2013-03-16 17:14:21 +09:00
Randy Mackay f263e81ed7 Copter: remove unused GPS and baro filters 
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
 2013-03-16 00:20:15 +09:00
Randy Mackay cb84ec9d9b Copter: add current based compass compensation 2013-03-03 23:02:36 +09:00
Randy Mackay e0506bd622 Copter: inav circle initial implementation 2013-02-26 11:35:35 +09:00
Randy Mackay d6ff5ae261 Copter: add roll-pitch slew for auto modes 
Added reporting of roll, pitch inputs for ACRO, AUTO
 2013-02-24 14:42:04 +09:00
Randy Mackay cbde042ec5 Copter: remove non-inav loiter and wp controllers 
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
 2013-02-24 14:41:52 +09:00
Randy Mackay 609676e26c Copter: add logging of compass values 
Removed rarely used ITERM because we didn't have enough bits in the log
mask
 2013-02-24 14:41:48 +09:00
Randy Mackay 1410063a14 Copter: new ROLL_PITCH_WP_INAV roll-pitch mode 
small corrections to allow waypoints to work with new inertial nav wp
controller
 2013-02-24 14:41:40 +09:00
Randy Mackay 67c69a19ee Copter: remove baro-only alt hold 
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
 2013-02-24 14:41:29 +09:00
Randy Mackay fcf102b2cf Copter: inertial nav waypoint controller 
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
 2013-02-24 14:41:09 +09:00
Jason Short 7d5b975da2 AC: Flip code fix 
Flight tested it today and made some flips. Throttle adjusted in Manual throttle modes. Not tested in AP throttle modes such as alt hold.
 2013-02-23 13:14:11 +09:00
Jason Short abd0fb9099 AC : global static variables should not be initialized to zero 2013-02-22 17:34:18 +09:00
Randy Mackay 9904e9f4db Copter: update firmware version to 2.9.1-rc1 2013-02-19 13:43:36 +09:00
Randy Mackay a0b65a262b Copter: use scaled throttle for accel-throttle's I term 
Accel throttle's I term is taken from scaled manual throttle
 2013-02-01 22:37:25 +09:00
Randy Mackay 06a71af12f Copter: THR_MID used to scale manual throttle 2013-02-01 22:37:16 +09:00
rmackay9 9c3b9907dd Copter: bug fix to set sonar_alt_health to zero when disabled 2013-01-31 17:00:28 +09:00
Randy Mackay ce370bab0c Copter: rename CUR and CURR to CURRENT for logging 
Based on user complaint that enable/disable was using CUR while message
was appearing as CURR
 2013-01-26 17:20:41 +09:00
Randy Mackay d2767b911c AP_Math: switch get_distance_cm to return uint32_t 
Includes changes required on ArduCopter and ArduPlane side as well
 2013-01-26 17:04:12 +09:00
Randy Mackay 0056bfadd7 Copter: rename ROLL_PITCH_LOITER 
new name ROLL_PITCH_LOITER_INAV makes it more clear that it should only
be used with the new inertial nav loiter controllers
 2013-01-25 23:27:31 +09:00
Randy Mackay aaecc25ac7 Copter: leonard's inav2 
Moved loiter controller to navigation.pde
 2013-01-25 15:16:35 +09:00
Randy Mackay fd02cfe706 Copter: added set_nav_mode to control initialisation of nav controllers 
Renamed run_navigation_controllers() to run_autopilot()
Renamed update_nav_wp() to update_nav_mode()
Renamed wp_control to nav_mode to be more consistent with roll-pitch,
yaw and throttle controllers
 2013-01-25 15:16:29 +09:00
Randy Mackay 9a09f086d2 Copter: Leonard Hall's inertial nav ver 2 2013-01-23 12:34:49 +09:00
rmackay9 ab1978ad50 Copter: Leonard Hall's inertial nav based loiter 2013-01-22 18:38:00 +09:00
Robert Lefebvre dde713aaa5 Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this. 2013-01-20 21:32:00 +09:00
Randy Mackay 577bf865b3 Copter: update firmware version to 2.9-dev 
The -dev extension indicates that we are post 2.9 release
 2013-01-17 13:03:33 +09:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles. 
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
 2013-01-16 13:52:01 +11:00
Randy Mackay 148c227d73 Copter: update firmware version to rc5 2013-01-15 12:17:41 +09:00
Randy Mackay c1fa850d10 ArduCopter: update firmware version to 2.9-rc4 2013-01-13 20:01:09 +11:00
Randy Mackay 175f69a64f ArduCopter: smooth throttle when switching from manual throttle to alt hold 
new set_accel_throttle_I_from_pilot_throttle function copies the
difference between the pilot's throttle and hover throttle to the
accelerometer based throttle controller's I term.
 2013-01-13 20:00:59 +11:00
Randy Mackay fbed8b8861 ArduCopter: alphabetized the contributors list 
Jonathan Challinger added
 2013-01-13 20:00:28 +11:00
Randy Mackay 5965914039 ArduCopter: increase firmware version to 2.9-rc3 2013-01-13 20:00:25 +11:00
Andrew Tridgell b0c710b67f Copter: move read_AHRS() before run_rate_controllers() 
this ensures the rate controllers use the latest data
 2013-01-13 20:00:14 +11:00
rmackay9 f25f1cb3bf ArduCopter: changed alt hold to use the sonar if enabled and healthy 2013-01-13 19:56:19 +11:00
rmackay9 21b6c78d12 ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes 
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
 2013-01-13 19:51:47 +11:00
Randy Mackay 87627d883b ArduCopter: use new logging method for remaining packet types 
Additional changes include renaming RAW dataflash type to IMU
 2013-01-13 00:17:44 +09:00
Andrew Tridgell af478d52bc Copter: use the new logging methods for 2 packet types 
the rest still need to be converted
 2013-01-12 18:15:23 +11:00
Andrew Tridgell 0fe7901422 Copter: only print perf data when SCHED_DEBUG is non-zero 2013-01-12 12:06:40 +11:00
Andrew Tridgell dcb181d2d8 Copter: use new AP_Scheduler library 2013-01-12 12:02:57 +11:00
Andrew Tridgell 2e57720444 Copter: move memcheck_init() earlier in setup 2013-01-11 10:24:21 +11:00
James Bielman 7374e5d84e ArduCopter: Use 16-bit arithmetic when comparing event tick counters. 
- On the ARM, once the tick counter wrapped, we stopped running events
  because the wraparound case wasn't being handled correctly.  Make
  sure the comparison is 16 bits to prevent this.
 2013-01-09 11:19:52 -08:00
James Bielman 7827a4a54a ArduCopter: Add AP_HAL_SMACCM support. 
- Added default configuration to "config.h".
- Added main function to run under FreeRTOS with HWF4.
 2013-01-09 11:19:51 -08:00
James Bielman ab37f833db MS5611: Fix CONFIG_MS5611_SERIAL definitions. 
- Make sure the values are defined as integers.  We were always using
  SPI rather than using I2C when desired.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell e575c5eba0 Copter: read baro at 50Hz 2013-01-09 23:46:05 +11:00
Andrew Tridgell 269804e866 Copter: use barometer.accumulate() 
this gives us more consistent timing and faster baro reads on APM1
 2013-01-09 23:08:19 +11:00
Andrew Tridgell 860f4b2605 Copter: merge the latest 2.9 changes into master 2013-01-08 14:37:40 -08:00
Andrew Tridgell d11dde578f Copter: a useful bit of timing debug code 
enable when looking at main loop timing
 2013-01-07 11:07:44 +11:00
Andrew Tridgell d952ccf968 Copter: added main_loop_ready() function 
this tells us when the main loop is ready to run. MAVLink won't send a
message if the main loop could run.
 2013-01-07 11:07:34 +11:00
Andrew Tridgell c48714be16 Copter: enabled PX4 sensors 2013-01-05 20:39:31 +11:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
Andrew Tridgell 94e3322e24 Copter: fixed build on px4 2013-01-02 22:09:02 +11:00
Andrew Tridgell e56a7eacec Copter: don't pass board version to motors 2013-01-02 15:28:34 +11:00
Andrew Tridgell ead38f917f Copter: use GRAVITY_MSS 2013-01-02 14:45:08 +11:00
rmackay9 228ad2198f ArduCopter: update firmware version to 2.9-rc2 2013-01-02 09:55:37 +11:00
rmackay9 677b38a48e ArduCopter: first implementation of surface tracking using sonar 
Note: not yet enabled as part of any flight mode
 2013-01-02 09:55:37 +11:00
rmackay9 68b62abd38 ArduCopter with the new Camera and Relay classes for APM1 and APM2. 
All changes by Sandro Benigno
 2013-01-02 09:55:37 +11:00
rmackay9 e850ab7ccd ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes 2013-01-02 09:24:31 +11:00
Craig@3DR 0ed25cf719 Global change all references from 
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
 2013-01-02 09:24:31 +11:00
rmackay9 466097b383 ArduCopter: use inertial nav for current altitude and climb rate 2013-01-02 09:22:51 +11:00
rmackay9 5ba363b007 ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running 
Also removed redundant heartbeat message
 2013-01-02 09:21:35 +11:00
rmackay9 bd0e018ca0 ArduCopter: restore auto-trim method but now use AHRS.add_trim 2013-01-02 09:20:08 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code. 
Protected behind a #define
 2013-01-02 09:19:39 +11:00
rmackay9 e6519330f4 ArduCopter: remove unused rc_override variables to save 21 bytes 2013-01-02 09:19:17 +11:00
rmackay9 ac8af9a53f ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate 
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
 2013-01-02 09:19:17 +11:00
rmackay9 d926360e81 ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts 2013-01-02 09:14:31 +11:00
rmackay9 6da68c53a5 ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled 2013-01-02 09:13:42 +11:00
rmackay9 5633164fa0 ArduCopter: bug fix for compass.accumulate check in main loop (millis vs micros issue) 2013-01-02 09:12:40 +11:00
rmackay9 8e032b89ee ArduCopter: create 2.9 branch and update firmware version 2013-01-02 09:10:40 +11:00
Andrew Tridgell 06357c40f2 Copter: use new functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell a02f723f3a Copter: fixed HIL builds 2012-12-20 14:52:37 +11:00
Andrew Tridgell 9e986801c9 Copter: fixed SITL for ArduCopter 2012-12-20 14:52:34 +11:00
Andrew Tridgell 08b1c2d590 Copter: fixed GPS init 2012-12-20 14:52:33 +11:00
Pat Hickey d5d97be837 ArduCopter: add param loader properly implement parameters 
* thanks tridge!
 2012-12-20 14:52:29 +11:00
Pat Hickey 5e63491994 ArduCopter: fix issues with HAL/HIL mixup and baro/compass instances 2012-12-20 14:52:29 +11:00
Pat Hickey 21d0da84a6 ArduCopter: temporarily disable AP_Param::setup_sketch_results 
* rebased away tridge's AP_Param changes as they seemed possibly buggy?
 2012-12-20 14:52:29 +11:00
Pat Hickey a0151aa66c ArduCopter: fix cliSerial null ptr, do AP_Param::setup_sketch_defaults 
* plus make SITL DataFlash available.
 2012-12-20 14:52:29 +11:00
Pat Hickey 2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey ade7099d75 ArduCopter: add AP_HAL_MAIN 2012-12-20 14:52:28 +11:00
Pat Hickey 5bd7046a95 ArduCopter: sketch cpp builds! 2012-12-20 14:52:28 +11:00
Pat Hickey 7af03127f6 ArduCopter: more work 2012-12-20 14:52:28 +11:00
Pat Hickey 70f4739522 ArduCopter: more fixes 2012-12-20 14:52:28 +11:00
Pat Hickey f281d9265e ArduCopter: reworked sonar analog source creation 2012-12-20 14:52:28 +11:00
Pat Hickey d9e0bbbbab ArduCopter: first pass at AP_HAL porting 
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
 2012-12-20 14:52:27 +11:00
Pat Hickey a4f1f6a5db AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR 2012-12-20 14:51:28 +11:00
Pat Hickey 3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches 
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
 2012-12-20 14:51:19 +11:00
Jason Short 19ae5c30eb ACM : Formatting 2012-12-13 20:12:39 -08:00
rmackay9 047f848cc7 ArduCopter: remove ThirdOrderCompFilter from list of includes 2012-12-10 09:14:44 +09:00
rmackay9 0f7bb79d89 ArduCopter: add comments to tuning parameters. 
Use RC_CHANNEL types as defined by RC_Channel library.
Remove unused definitions.
 2012-12-09 16:44:42 +09:00
rmackay9 8c2423f618 ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde 2012-12-09 15:24:19 +09:00
rmackay9 b4e5176e2a ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 2012-12-09 14:27:33 +09:00
Robert Lefebvre 0eb57bf93d ACM: TradHeli 
Fix to make update_throttle_cruise work with stab_throttle scaling.
 2012-12-08 15:12:39 -05:00
rmackay9 9dd978576b ArduCopter: auto yaw changes to allow pilot override of yaw during missions 
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw).  We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
 2012-12-08 14:23:32 +09:00
rmackay9 99b32a39c4 ArduCopter: InertialNav time constant CH6 tuning changed to only update enabled axis 2012-12-07 13:01:40 +09:00
rmackay9 39d524212f ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter. 
When disabled the original velocity based throttle controller is used.
 2012-12-06 10:31:57 +09:00
rmackay9 a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor 
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
 2012-12-06 10:31:52 +09:00
rmackay9 072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 d7f76ebd87 ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI) 2012-12-06 10:31:25 +09:00
rmackay9 7b4ed2d227 ArduCopter: restored landing detector to landing throttle mode. 
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
 2012-12-06 10:31:20 +09:00
rmackay9 a94826f182 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9 1036b35128 ArduCopter: added back in angle boost and recombined for heli and multicopter 2012-12-06 10:30:55 +09:00
rmackay9 3cbef57c64 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy 
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
 2012-12-06 10:30:49 +09:00
Robert Lefebvre 1d589c0b7d ACM: TradHeli 
Fixes for Attitude rate controllers.
 2012-12-04 14:42:04 -05:00
Robert Lefebvre 315a7e8000 ACM: Yaw Look Ahead Changes 2012-12-04 13:26:41 -05:00
Robert Lefebvre 9130045298 ACM: Code Cleanup 2012-11-30 17:05:12 -05:00
rmackay9 8141f0b600 ArduCopter: bug fix - increase mpu6k sample rate to 100hz 2012-11-30 23:49:18 +09:00
Andrew Tridgell 6fbf5ec8f2 Copter: update ArduCopter for new ins interface 2012-11-30 07:15:18 +11:00
Robert Lefebvre 07d7d90882 ACM: TradHeli 
Bringing in Low Pass Filter for Rate Controllers
 2012-11-26 21:51:23 -05:00
Robert Lefebvre 6b8c39dd10 ACM: Creating Yaw_Look_Ahead yaw mode. 
This function is not fully tested yet.
 2012-11-26 21:37:13 -05:00
Robert Lefebvre 3f0e8dd358 ACM: TradHeli 
Bringing in Low Pas Filter
Commented out because it does not build.
Needs updates to Low Pass Filter Lib
 2012-11-26 21:21:12 -05:00
Robert Lefebvre e8d619acad ACM: Begin creation of TradHeli rate control. 
May affect Multi-Rotors.
 2012-11-26 21:02:41 -05:00
Robert Lefebvre 6b1fee767a ACM: TradHeli 
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
 2012-11-26 19:37:20 -05:00
Robert Lefebvre 95eeda7cf7 ACM: TradHeli 
Removing Angle Boost function.
Does not make sense for helis due to aerodynamics.  Can cause more problems than it solves.
 2012-11-26 18:58:21 -05:00
Robert Lefebvre 8056b78c55 ACM: TradHeli 
Remove Rate I-term reset when throttle stick is on the bottom.  This could be very bad for helis since it's plausible to use full downstick while flying.
There is obviously a risk here of building up a false I-term on the ground but this isn't a good solution for that anyway.
Also removed what appears to be some deadwood.
 2012-11-26 18:49:24 -05:00
Andrew Tridgell 5818aaad42 Copter: fixed build error 
thanks to Marco for pointing this out
 2012-11-24 20:39:35 +11:00
Andrew Tridgell cd07d965a7 Copter: ported RSSI_PIN option from ArduPlane 
this is useful for OSD users
 2012-11-22 20:59:33 +11:00
rmackay9 3372355e07 ArduCopter: remove commented out remnants of roll_scale_d and pitch_scale_d 2012-11-22 12:50:39 +09:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
rmackay9 07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls 
improved performance logging to dataflash
 2012-11-19 01:16:07 +09:00
Robert Lefebvre 9c6e914bf8 Added Leonard to Contributor List. 2012-11-16 15:43:03 -05:00
rmackay9 258442770d ArduCopter: flight mode changes ignored while in throttle failsafe 
reaction time to flight mode changes (when not in failsafe) reduced from 0.6 seconds to 0.1 seconds
 2012-11-13 12:50:51 +09:00
rmackay9 dcd98eee78 ArduCopter: remove some variables no longer required with introduction of AP_state 2012-11-12 12:41:25 +09:00
rmackay9 ac5dcc8d49 ArduCopter: remove last remanants of rate_d to resolve compiler warning of unused variables 2012-11-12 12:35:58 +09:00
Jason Short c1b759d5d8 ACM: Added a speed filter for throttle cruise, increased alt change rate for alt hold, increased the max climb_rate reporting 2012-11-11 18:17:33 -08:00
Jason Short 9e0b0b9fcd ACM : loging ApState at faster rate 2012-11-11 18:00:10 -08:00
rmackay9 bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00
rmackay9 95f6357d35 ArduCopter: fix APM2 build 2012-11-10 22:06:23 +09:00
Jason Short e4cec91e59 ACM : Arducopter Added ap state bitfield, system bitfield 2012-11-09 22:15:15 -08:00
Jason Short cdabc3878b ACM: Arducopter - remove the stabilize D scheduling 2012-11-09 22:15:15 -08:00
Jason Short d2a0913b2d ACM : formatting 2012-11-09 22:15:15 -08:00
rmackay9 b13264c884 AP_InertialNav: reanme AP_InertialNav and ThirdOrderCompFilter classes to resolve desktop build compiler errors 2012-11-07 22:24:00 +09:00
rmackay9 ad431d2f25 ArduCopter: fixed HIL build caused by optical flow semaphore changes 2012-11-07 21:13:34 +09:00
rmackay9 1f801714e8 ArduCopter: incorporate new version of inertial navigation 
Moved several navigation functions from ArduCopter.pde to navigation.pde
 2012-11-07 19:21:31 +09:00
rmackay9 a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Jason Short e138b0a1d7 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
rmackay9 78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
Jason Short a0752dc7dc ACM Acceleration management 
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
 2012-10-21 14:32:39 -07:00
rmackay9 a37a9b5b67 ArduCopter: updated firmware version to 2.8 2012-10-20 09:50:53 +09:00
Pat Hickey d4bb8a10d7 Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Robert Lefebvre 592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9 1c08e48b4b ArduCopter: updated firmware version to 2.7.4-Zeta 2012-10-18 23:30:28 +09:00
rmackay9 583f2e49a3 ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9 d2912e4e01 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 9e3c2dd105 ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 8519fe55d3 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 956b347d68 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 4016f3ba85 ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
LeonardTHall d7b7e1cefa New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
rmackay9 997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9 1e79d265a1 ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9 cf3e49eea2 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
Andrew Tridgell 601fe89baa ACM-HIL: fixed optflow declaration 2012-10-11 11:51:25 +11:00
Pat Hickey da374f9043 ArduCopter: Provide AP_Semaphore instance for SPI3 bus on APM2. 2012-10-09 11:39:39 -07:00
rmackay9 c0ad98be31 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9 61d0c8e35c ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9 e375a27058 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 ed881117e0 ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9 b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9 93ae29a3e9 ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
Andrew Tridgell 5fd39bb928 ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9 303ca11c4c HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
rmackay9 9e66b555cb ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
Jason Short 834f961409 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short 4c8e257ea2 ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Jason Short 34e07c826f ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Andrew Tridgell 841d2700b6 ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9 fd110a2723 ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
Andrew Tridgell f97104b435 ACM: use compass.accumulate() in ArduCopter 
this gives us a much less noisy magnetometer
 2012-09-08 10:06:04 +10:00
rmackay9 5073e56c06 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9 c9d34c1737 ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2. 
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
 2012-09-02 12:51:23 +09:00
Craig Elder 274b2e2143 Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Jason Short 082913efd4 ACM : revert back to the 2.6 climb rate calc 
The current filter is outputting wild oscillations.
 2012-08-28 21:22:07 -07:00
Craig Elder d8a2bfb9e8 Arducopter: Preparing for 2.7.2 Release 2012-08-28 18:30:41 -07:00
Jason Short 9d64bea2ef ACM: Altitude Adjust 2012-08-28 15:40:08 -07:00
Jason Short 98cc65862d ACM : Log Timing 2012-08-28 15:40:08 -07:00
uncrustify 4021a64747 uncrustify ArduCopter/ArduCopter.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
Andrew Tridgell e9928e78de ACM: fixed TradHeli build 2012-08-22 09:55:31 +10:00
Robert Lefebvre 575b99b4be TradHeli: Creating Flybar Acro mode. 2012-08-21 16:54:01 -04:00
rmackay9 75459b09be ArduCopter: changed reset_throttle_counter to uint8_t to get rid of overflow bug that was preventing target altitude from being locked in after pilot input down throttle. 2012-08-19 11:50:35 +09:00
Jason Short 988d0c98fc ACM : Alt hold adjustment - made angle boost work during alt hold changes. 
increased length of delay when reverting to automatic hold to deal with latency of baro sensor
 2012-08-18 09:30:46 -07:00
rmackay9 5b6f7f0012 ArduCopter: modified altitude hold so that 1 second slow down period is executed after pilot moves throttle back into deadzone 2012-08-18 21:45:49 +09:00
Jason Short 770956a3fd ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP 2012-08-16 15:39:50 -07:00
rmackay9 36f947acb9 ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t". 
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
 2012-08-16 20:04:46 +09:00
Jason Short a4bc5950cf ACM: Added a filtered version of Location for GPS lag. 
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
 2012-08-14 14:11:51 -07:00
Jason Short 993c89c4f8 ACM: Revved the version 2012-08-14 14:11:51 -07:00
Jason Short b01a71c4b9 ACM: Toy mode updates - added second toy mode 2012-08-11 22:37:27 -07:00
Andrew Tridgell 81440a1b09 AHRS: fixed build 
AP_Airspeed.h is now needed to build AHRS
 2012-08-11 12:22:55 +10:00
Jason Short 3ad08b7ffc ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second. 2012-08-10 10:02:32 -07:00
Jason Short 02649f3f11 ACM : Arducopter.pde 
command_nav_index upped to in16t for negative number
renamed trim flag > CH7_flag
Added fast_corner var
removed unused alt vars
Alt hold I term update
 2012-08-09 16:59:43 -07:00
Amilcar Lucas 0b0b9c29a2 Allow fully independent operation of two AP_Mount instances 2012-08-08 23:11:23 +02:00
Amilcar Lucas 9cc705939a Add a second mount instance 2012-08-08 23:07:25 +02:00
Andrew Tridgell fb26160d3b ACM: change to use get_bearing_cd() instead of get_bearing() 2012-08-08 12:12:30 +10:00
Andrew Tridgell c2a4d59132 AP_Param: update ArduCopter core for new AP_Param interface 2012-08-08 12:11:57 +10:00
Amilcar Lucas d9f1140278 ArduCopter: Use generic channel names for AP_Mount servos. 
This simplifies mission planner, the same code can be used for plane and copter now.
 2012-08-06 23:33:51 +02:00
Amilcar Lucas f14237126a Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas 107155fa1a AP_Mount: Allow using any RC channel to control any of the mount axes. 
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
 2012-08-05 23:48:57 +02:00
Amilcar Lucas b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas 4ba847c449 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
rmackay9 c091c8e0e6 ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode. 2012-08-01 12:15:02 +09:00
Andreas M. Antonopoulos de85442c36 AC2.7.1: Updated version and tag 2012-07-31 13:11:17 -07:00