Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
49,658 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

1810 Commits

Author SHA1 Message Date
Siddharth Purohit c962292bae AP_HAL_ChibiOS: add support for H757I Evaluation board 2021-06-30 19:33:17 +10:00
Siddharth Purohit abc26d1993 AP_HAL_ChibiOS: add QSPI Device Driver in HAL 2021-06-30 19:33:17 +10:00
Siddharth Purohit 4cb48da984 modules: update ChibiOS 2021-06-30 19:33:17 +10:00
Siddharth Purohit 0e4fbe7c46 AP_HAL_ChibiOS: allow using internal compasses onboard 2021-06-30 17:06:02 +10:00
Siddharth Purohit 882b01bae3 AP_HAL_ChibiOS: Use HAL_CANMANAGER_ENABLED instead of HAL_ENABLE_LIBUAVCAN_DRIVERS 2021-06-24 09:02:42 +10:00
bugobliterator 7e8f11b749 AP_HAL_ChibiOS: allow embedded bootloader to be excluded 
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
 2021-06-24 08:36:30 +10:00
Andy Piper 9e99f724e5 AP_HAL_ChibiOS: add 1Hz update_channel_masks() 
Send dshot commands in update function
 2021-06-22 09:55:27 +10:00
Andrew Tridgell ed93caadd5 HAL_ChibiOS: fixed build of VRUBrain-v51 
overflowing flash
 2021-06-21 16:48:10 -07:00
Andy Piper 3386cbb0df AP_HAL_ChibiOS: add OREO support to CubeSolo. 
add back RunCam and Spektrum support to MatekF405-Wing
remove gripper support from MatekF405-Wing
 2021-06-16 20:25:58 +10:00
Samuel Tabor 3fc58de7ce AP_HAL_ChibiOS: Restore soaring on F405-Wing board. 2021-06-16 09:15:03 +10:00
Andy Piper d36b4bfa3f AP_HAL_ChibiOS: make sure all MatekF405 bi-dir outputs get a DMA channel 
only allow (b)dshot on M1-4 to get full DMA on USART3 and UART4
 2021-06-15 09:49:02 +10:00
Peter Barker f780a5c358 AP_HAL_ChibiOS: fix infinite loop for large SPI transfers 
len is 32 bits; i may integer-wrap back to zero at 65535+1
 2021-06-14 09:13:49 +10:00
Dr.-Ing. Amilcar do Carmo Lucas d363cbadcc AP_HAL_ChibiOS: Disable un-needed hardware drivers in SkyViper builds 
these boards have integrated ESCs with no telemetry
 2021-06-09 21:42:51 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 8593672f4c AP_HAL_ChibiOS: fix compilation when HAL_WITH_ESC_TELEM == 0 2021-06-09 21:42:51 +10:00
Tom Pittenger 7a004656a2 AP_HAL_ChibiOS: use HAL_ENABLE_LIBUAVCAN_DRIVERS instead of HAL_MAX_CAN_PROTOCOL_DRIVERS 2021-06-09 18:36:18 +10:00
Tom Pittenger 1feec460c4 AP_HAL_ChibiOS: enable BattMon MPPT PacketDigital to CubeOrange-periph 2021-06-09 18:36:18 +10:00
Tom Pittenger f764bd6547 AP_HAL_ChibiOS: disable EventSource only when CH_CFG_USE_EVENTS is false 
(cherry picked from commit 6e7542a70ca2343ab8d18470deaf5fc2d27390af) from bugobliterator
 2021-06-09 18:36:18 +10:00
Andrew Tridgell f09abc705b HAL_ChibiOS: bring us to 18k free for MatekF405-Wing plane build 2021-06-09 18:07:00 +10:00
Peter Barker 09e82e52e1 AP_HAL_ChibiOS: disable AP_EFI on MatekF405-Wing and omnibusf4pro 2021-06-08 14:08:34 +10:00
Peter Barker 3ba57fed89 AP_HAL_ChibiOS: add support for AP_Logger into AP_Periph 2021-06-08 09:57:55 +10:00
Andrew Tridgell 67fea9f2f8 HAL_ChibiOS: fixed DMA disable on contention 
this fixes a problem with the automatic DMA disable on DMA contention
in UARTs. This fixes issue #14581

the problem was that while tx_dma_enabled was correctly set to false,
it would keep looping inside write_pending_bytes_DMA() if the data
arrived in the write buffer at a faster rate than it could be sent
out, which did happen with a mavlink stream rate of 4Hz. This means it
kept using DMA even with tx_dma_enabled set to false. The result was
that the automatic flow control code never got a chance to run and we
didn't switch back to non-DMA for these low baudrate contended UARTs
 2021-06-05 19:03:03 +10:00
Andrew Tridgell 3128d71aac HAL_ChibiOS: display uart even when not initialised 
don't rely on thread allocation for uart info display
 2021-06-05 18:52:33 +10:00
Andrew Tridgell c34d8e80e9 HAL_ChibiOS: fixed serial info indexing for EMPTY uarts 2021-06-05 18:52:33 +10:00
Andrew Tridgell 6fab8feeae HAL_ChibiOS: implement uart_info per-uart 
this allows for some UARTs to be of EMPTY type
 2021-06-05 18:52:33 +10:00
Andrew Tridgell 135a4d2c83 HAL_ChibiOS: fixed order and labelling of @SYS/uarts.txt 2021-06-05 18:52:33 +10:00
Andrew Tridgell a895bc1846 HAL_ChibiOS: reduce flash on VRBranin-v51 2021-06-05 13:05:30 +10:00
honglang 847ce3b311 AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088 2021-06-03 13:57:27 +10:00
CUAVcaijie 0ff38e1379 HAL_ChibiOS: CUAV ICM20649 on SPI6 bus replaced by ICM20689 
alternative IMUs for Nora and X7
 2021-06-02 10:49:55 +10:00
Andrew Tridgell 8701932670 HAL_ChibiOS: return zeros in dma.txt on first fetch 2021-06-01 11:36:07 +09:00
Andrew Tridgell 5529ba36e2 HAL_ChibiOS: added HolybroGPS AP_Periph port 2021-06-01 09:19:51 +10:00
Andrew Tridgell 23c0f257b6 HAL_ChibiOS: default off serial protocols in AP_Periph 
this allows for a GPS on high numbered ports
 2021-06-01 09:19:51 +10:00
Andrew Tridgell ac1e03e16a HAL_ChibiOS: move heater gains on CubeOrange to hwdef.dat 
this makes it easier for users using apjtool to override params
 2021-06-01 08:07:49 +10:00
Andrew Tridgell 244d896bfb HAL_ChibiOS: enable heater on Pix32v5 2021-06-01 08:07:49 +10:00
bugobliterator ea1795d6fe AP_HAL_ChibiOS: ensure ToneAlarm is not disabled when UAVCAN is available 2021-05-31 07:34:02 +10:00
Michael Oborne 126456742a Hwdef: add Joey 2021-05-27 14:19:55 +10:00
Andrew Tridgell 91dce554d1 HAL_ChibiOS: removed unnecessary USB product IDs from boards 2021-05-27 09:30:30 +09:00
Andrew Tridgell de3a3f7edf HAL_ChibiOS: fixed case of Pix32v5 USB product string 2021-05-27 09:30:30 +09:00
Siddharth Purohit ad9a8c8bd9 AP_HAL_ChibiOS: record error states in CANFDIface and CANIface 2021-05-26 18:25:01 +10:00
Michel Pastor b083848ae7 AP_HAL_ChibiOS: fix comments 2021-05-26 17:59:04 +10:00
Michel Pastor a148849ec3 AP_HAL_ChibiOS: RCOutput_serial: fix comment for set_reversible_mask() 2021-05-26 17:59:04 +10:00
Andrew Tridgell fced5271af HAL_ChibiOS: expand pin map of G474 to cover 64 pin parts 2021-05-25 09:35:25 +10:00
Andy Piper a7a9fa93f0 AP_HAL_ChibiOS: correct enabled mask for motor channel output 2021-05-24 07:57:51 +09:00
Dr.-Ing. Amilcar do Carmo Lucas fc7e242bae AP_HAL_ChibiOS: Fix typo (NFC) 2021-05-21 09:43:10 +10:00
Peter Barker 79809b60aa AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too) 2021-05-20 17:23:17 +10:00
Siddharth Purohit 5bcc713985 AP_HAL_ChibiOS: add omnibusf4pro config with one compass and gps 2021-05-19 18:04:20 +10:00
Peter Barker 31ef6db937 AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs 2021-05-19 17:38:47 +10:00
Andrew Tridgell ebe858f762 HAL_ChibiOS: auto-set HAL_LOGGING_ENABLED for AP_Periph builds 2021-05-19 17:38:47 +10:00
Peter Barker dbf5357592 AP_HAL_ChibiOS: base use of InternalError on build type not HAL_LOGGING_ENABLED 
Really not sure why we were using HAL_LOGGING_ENABLED here
 2021-05-19 17:38:47 +10:00
Peter Barker 7d8c5757d6 AP_HAL_ChibiOS: move from HAL_NO_LOGGING to HAL_LOGGING_ENABLED 2021-05-19 17:38:47 +10:00
Andy Piper 6a21446bac AP_HAL_ChibiOS: correct KakuteF4Mini board id 2021-05-18 10:02:36 +10:00
Andy Piper 25be0cf4b4 AP_HAL_ChibiOS: pull the right pin for KakuteF4 buzzer 2021-05-18 10:02:36 +10:00
vierfuffzig 393ac386cc AP_HAL_ChibiOS: add revo-mini-i2c alt configs 2021-05-18 09:53:38 +10:00
Andy Piper f8a59a4a72 AP_HAL_ChibiOS: set inbound bitrate correctly for bi-directional dshot1200 2021-05-14 07:23:59 +10:00
Andy Piper b33b07e43f AP_HAL_ChibiOS: fixes for KakuteF4Mini 2021-05-12 17:26:35 +10:00
Andy Piper 387812bb01 AP_HAL_ChibiOS: avoid startup scream on KakuteF4 and variants 2021-05-12 17:26:35 +10:00
Andy Piper f0ff4a2cd4 AP_HAL_ChibiOS: hwdef for KakuteF4Mini 2021-05-12 17:26:35 +10:00
Andy Piper 6447bd1cdd AP_HAL_ChibiOS: use AP_ESC_Telem to record erpm data and error rate 
don't output RPM data if bi-dir dshot is not enabled
 2021-05-12 17:01:11 +10:00
Andrew Tridgell e1a5d73504 HAL_ChibiOS: fixed DTCM comment for F732 2021-05-09 06:44:19 +10:00
Andrew Tridgell b7fffe35f9 HAL_ChibiOS: added FreeflyRTK GPS build 
a F732 based GPS peripheral
 2021-05-09 06:44:19 +10:00
Andrew Tridgell 4d661911e5 HAL_ChibiOS: allow adjustment of F7 I2C timing 
needed for F732
 2021-05-09 06:44:19 +10:00
Andrew Tridgell 6b9e4161cb HAL_ChibiOS: removed UDID_START from all MCU defs 
use UID_BASE from ChibiOS headers
 2021-05-09 06:44:19 +10:00
Andrew Tridgell 36d5c98e96 HAL_ChibiOS: default UDID_START to UID_BASE 2021-05-09 06:44:19 +10:00
Andrew Tridgell 2dc4c50953 HAL_ChibiOS: fixed default OTP address and size 2021-05-09 06:44:19 +10:00
Andrew Tridgell 22f7218acf HAL_ChibiOS: support 512k F7 parts for flash 2021-05-09 06:44:19 +10:00
Andrew Tridgell 03cae60471 HAL_ChibiOS: added STM32F732 support 2021-05-09 06:44:19 +10:00
Andrew Tridgell f1de0c7fe2 HAL_ChibiOS: added F732 16MHz CubeMX config 2021-05-09 06:44:19 +10:00
Andy Piper f6b9479542 AP_HAL_ChibiOS: add accessor for UART DMA status 2021-05-05 17:50:42 +10:00
Andy Piper dbd9b3a9ae AP_HAL_ChibiOS: ESC telemetry is orthogonal to RPM telemetry 2021-05-05 17:41:24 +10:00
Andy Piper 384ecd4a5b AP_HAL_ChibiOS: check command queue is empty before arming 2021-05-05 17:41:24 +10:00
Andy Piper 66fadf53a1 AP_HAL_ChibiOS: remove dshot calibration step 2021-05-05 17:41:24 +10:00
Andy Piper f3f3056dba AP_HAL_ChibiOS: add support for dshot commands to rcout 
add support for dshot beepcodes through tonealarm
add support for dshot reversal and command queue
add support for dshot commands to all channels
correctly manage channel enablement in PWM groups
Correctly send dshot commands when using bi-dir dshot
allow reversible settings to be changed
ChibiOS: allow more than one type of ESC for dshot commands
Only execute reverse/reversible commands on BLHeli
add support for checking active ESCS
mark ESCs active when bdshot telemetry is returned
allow dshot alarm to be disabled
allow priroitized dshot commands
 2021-05-05 17:41:24 +10:00
Andrew Tridgell 8764d69e2c HAL_ChibiOS: default SDMMC clock to 12.5MHz max on H7 
this makes microsd considerably more reliable
 2021-05-02 13:04:42 +10:00
Andrew Tridgell f9866dc27e HAL_ChibiOS: fixed LED_SAFETY attached to FMU with recent DShot updates 2021-04-30 17:26:33 +10:00
QioTek ca6102ed28 f103Qiotek_Periph 
f103Qiotek_Periph
 2021-04-24 07:48:40 +10:00
QioTek 1de3135d14 HAL_ChibiOS: added f103-QiotekPeriph hwdef (#1) 
HAL_ChibiOS: added f103-QiotekPeriph
 2021-04-24 07:48:40 +10:00
Andy Piper 42ebc13e6c Revert "AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743" 
This reverts commit f9d166edf6.
 2021-04-22 18:39:06 +10:00
Andrew Tridgell 6764f039ca HAL_ChibiOS: added support for the new H7 luminousbee version 5 2021-04-21 20:41:34 +10:00
Andy Piper f9d166edf6 AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743 2021-04-21 17:18:53 +10:00
Andy Piper 558631918c AP_HAL_ChibiOS: add %age of total to thread statistics 
don't display meaningless thread info
 2021-04-21 17:14:11 +10:00
Andrew Tridgell 961e538cc0 HAL_ChibiOS: reduced flash usage on MatekF405 
overflowing by 1k
 2021-04-21 07:12:55 +10:00
Andy Piper 4bb4e2fb22 AP_HAL_ChibiOS: adjust GPIO settings for serial passthru 2021-04-20 10:35:22 +10:00
Andrew Tridgell 4118a3eb03 HAL_ChibiOS: check bus owner on all SPI transfers 2021-04-16 10:02:02 +10:00
Andrew Tridgell 9990404e64 HAL_ChibiOS: fixed G4 analog input build 
use right resolution in ADC peripheral for ADCv3
 2021-04-14 13:11:58 +10:00
Andrew Tridgell eca8cf3414 HAL_ChibiOS: save flash on boards that are critically low 
move to single OSD font on some boards

this saves about 12k on these boards. They were also extremely close
to overflowing flash, under 2k on some

Now that we support having an OSD font on the microSD card (where
available) we can reduce built in fonts without a large functionality
impact

This also disables some less used features on these boards:

 - generator support
 - object avoidance path planning
 - precision landing

This will give us some breathing room on these boards
 2021-04-13 09:58:59 +10:00
Andrew Tridgell 47a5d78397 HAL_ChibiOS: disable DMA on high contention UARTs 
switch to interrupt driven when in high contention
 2021-04-08 06:53:48 +10:00
anbello 77998fb5ba revo-mini bdshot 2021-04-07 17:44:29 +10:00
anbello dcb90c7bdb revo-mini ext i2c 2021-04-07 17:26:56 +10:00
Andy Piper be39e1f297 AP_HAL_ChibiOS: correct current scale for BeastH7 and BeastF7 2021-04-07 17:25:19 +10:00
Andy Piper aa0ec0f091 AP_HAL_ChibiOS: optimize BeastH7 compilation 2021-04-07 17:25:19 +10:00
Iampete1 ec90ab13f4 AP_HAL_ChibiOS: RCOutput: print DMA alocation errors 2021-04-07 17:24:25 +10:00
Iampete1 15509f314c AP_HAL_ChibiOS: RCOuput: LED setup re-work 2021-04-07 17:24:25 +10:00
Andrew Tridgell 61c829d624 HAL_ChibiOS: only use SRAM4 for DMA for now 
we can enable others when we have an allocation interface that
specifies the peripheral type
 2021-04-07 17:10:45 +10:00
Iampete1 2377d33417 AP_HAL_ChibiOS: H7 set SRAM4 to no cache and allow DMA 2021-04-07 17:10:45 +10:00
Andrew Tridgell 4cddb12508 HAL_ChibiOS: fixed DMA sent calculation on UART DMA timeout 2021-04-07 07:34:45 +10:00
Andy Piper b3dbc21fa7 AP_HAL_ChibiOS: KakuteF7 bdshot configuration, tested by yaapu 2021-04-06 11:33:53 +10:00
Andy Piper 721850d00a AP_HAL_ChibiOS: fix dshot150. 2021-04-06 10:24:04 +10:00
Andy Piper f6b1e15b0e AP_HAL_ChibiOS: optimize bdshot ISRs 2021-04-06 10:24:04 +10:00
Andy Piper cb3b37d181 AP_HAL_ChibiOS: ensure that non-dshot modes get regular 1Khz updates 2021-04-06 10:24:04 +10:00
Andy Piper ea3291520c AP_HAL_ChibiOS: add fast cycle calibration step 2021-04-06 10:24:04 +10:00
Andy Piper 74d4af9ac9 AP_HAL_ChibiOS: reset bdshot IC correctly 
don't allow dshot rates below 800Hz.
set pin speed to MID1 to avoid glitching
don't run receive pulses on a timer
 2021-04-06 10:24:04 +10:00
Andy Piper 477ff72214 AP_HAL_ChibiOS: allow dshot rate to be set so as to both regularize the output as well as 
allow faster rates synchronized to the loop rate
synchronize 1Khz and use Betaflight definition for prescaler
adjust dshot bitrates
don't allocate IC DMA if already allocated
cancel DMA pulses correctly
try really hard to align pulses with push() by making each dshot pulse event driven
 2021-04-06 10:24:04 +10:00
Andrew Tridgell 45477f6063 HAL_ChibiOS: fixed default MSP port for f405-MatekGPS 2021-04-05 11:02:32 +10:00
Andrew Tridgell ca948171fe HAL_ChibiOS: fixed ADC error on revXY STM32H7 boards 
with the new ChibiOS revision we were configuring for newer revisions
of the H7, which meant that we changed the ADC config. This broke ADC
readings on revX and revY H7 MCUs.

This PR fixes it in two ways:

 1) change ChibiOS config to assume XY config chips

 2) use 16 bit ADC for H7, which means the chip rev doesn't matter,
    and also gives us 16x the resolution for ADC readinga, so we can
    read smaller voltage and current values
 2021-04-05 11:01:03 +10:00
willpiper 94bdca7f6f AP_HAL_ChibiOS: tidy up beastF7 DMA channels 2021-04-04 16:51:19 +10:00
Andrew Tridgell f0d6b79e8a HAL_ChibiOS: fixed skyviper builds with BMM150 2021-03-30 13:31:50 +09:00
Peter Barker cfacb5d34d AP_HAL_ChibiOS: split out a calculate_thread_priority method 2021-03-30 10:49:06 +11:00
Iampete1 7c96522e44 AP_HAL_ChibiOS: add semaphore to AnalogIn::channel to make it thread safe 2021-03-30 10:44:43 +11:00
Andrew Tridgell 07313ae71d HAL_ChibiOS: fixed 2nd CAN inferface on F4/F7 
CAN1_TX_IRQn is an enum not a defined. This was broken by the recent
change to support different CAN ordering
 2021-03-29 20:14:29 +11:00
Andrew Tridgell 88e277420f AP_HAL_ChibiOS: removed assert calls 
these waste flash space and do not do us any good
 2021-03-25 14:03:40 +11:00
Andrew Tridgell 2d4dfe8a2a HAL_ChibiOS: fixed (unused) FF_FS_TIMEOUT 
this change was harmless as we don't define FF_FS_REENTRANT
 2021-03-23 12:01:20 +11:00
Andrew Tridgell ffb2876f58 HAL_ChibiOS: disable unused ChibiOS features 2021-03-23 12:01:20 +11:00
Andrew Tridgell 744a2fe535 HAL_ChibiOS: use uint32_t for bit timing in passthru 
we should not use systime_t as it may be 16 bit
 2021-03-23 12:01:20 +11:00
Andrew Tridgell c3d16cf2e2 HAL_ChibiOS: use defines for G4 messageram 
review fix
 2021-03-23 12:01:20 +11:00
Andrew Tridgell b4e4d48e52 HAL_ChibiOS: switch OMNIBUSF7V2 timer for RCIN 
this avoids a conflict with shared interrupt on TIM1
 2021-03-23 12:01:20 +11:00
Andrew Tridgell ff31e10d9e HAL_ChibiOS: ensure that RCIN DMA channel is not shared 
RCIN DMA cannot be shared as it runs all the time
 2021-03-23 12:01:20 +11:00
Andrew Tridgell 2842730868 HAL_ChibiOS: fixed F3 CAN build 2021-03-23 12:01:20 +11:00
Andrew Tridgell 2fc7ea1a8b HAL_ChibiOS: added G4-ESC hwdef 2021-03-23 12:01:20 +11:00
Andrew Tridgell 353eca79b6 HAL_ChibiOS: fixed 32/64 micros bug in CAN select() 2021-03-23 12:01:20 +11:00
Andrew Tridgell bac9b27a3f HAL_ChibiOS: enable analogin on G4 2021-03-23 12:01:20 +11:00
Andrew Tridgell ac9e6ba86d HAL_ChibiOS: fix label for CCM on G4 2021-03-23 12:01:20 +11:00
Andrew Tridgell 7496b8bff5 HAL_ChibiOS: fixed DMAR register offset 
use offsetof() instead of a magic value
 2021-03-23 12:01:20 +11:00
Andrew Tridgell 4f10565f82 HAL_ChibiOS: fixed CANFD build on H7 2021-03-23 12:01:20 +11:00
Andrew Tridgell f2ac61f6ba HAL_ChibiOS: enable DShot on G4 2021-03-23 12:01:20 +11:00
Andrew Tridgell f57b1b9c4b HAL_ChibiOS: support logical/physical CAN bus mapping 
allow for first CAN interface to be CAN2 or CAN3
 2021-03-23 12:01:20 +11:00
Andrew Tridgell 2f7ff778be HAL_ChibiOS: fixed bug in DMA resolver 
idsets can be empty for a peripheral
 2021-03-23 12:01:20 +11:00
Andrew Tridgell 439a944801 HAL_ChibiOS: added support for STM32G474 MCU 2021-03-23 12:01:20 +11:00
Andy Piper e1d71486e4 AP_HAL_ChibiOS: build fixes for ChibiOS 20.3.x 2021-03-23 12:01:20 +11:00
Andrew Tridgell 5b59445471 AP_HAL_ChibiOS: fixes for build with 20.3.x ChibiOS 2021-03-23 12:01:20 +11:00
QioTek fe30612bb0 AP_HAL_ChibiOS: release ICM20649 reserve sensor 
BMI055 & BMI088 out of stock, release ICM20649 reserve sensor
 2021-03-22 19:05:03 +11:00
Andrew Tridgell bbd32844d1 HAL_ChibiOS: switch more boards to 32k FRAM 
this enables the parameter backup/restore on those boards, as well as
more waypoints

This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
 2021-03-21 11:59:12 +11:00
Andy Piper bb270014e7 AP_HAL_ChibiOS: make sure LEDs get a DMA channel on MatekH743-bdshot 2021-03-17 18:28:01 +11:00
Andy Piper 968d05a637 AP_HAL_ChibiOS: allow further LED channels to be allocated at the same length 2021-03-17 18:24:11 +11:00
Andrew Tridgell 8a8db85b9c HAL_ChibiOS: fixed build of f103-trigger fw 2021-03-16 18:28:58 +11:00
Lava Chemist 4a52f945db AP_HAL_ChibiOS: Add FlywooF745 2021-03-16 11:27:23 +11:00
Andy Piper d6575fb6ad AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7 2021-03-03 18:02:26 +11:00
Andrew Tridgell 4fbdb59398 HAL_ChibiOS: prevent sharing the same DMA stream on TIMn_UP channels 
this avoids an issue with DShot where we run the same DMA stream on
two timers at once
 2021-03-02 11:58:38 +11:00
Andy Piper 6cb263056d AP_HAL_ChibiOS: build fix for iomcu 2021-03-02 11:58:38 +11:00
Andy Piper d0e4d510cf AP_HAL_ChibiOS: order PWM timers by DMA UP stream id to prevent deadlocks in dshot 2021-03-02 11:58:38 +11:00
Andrew Tridgell 14791c335b HAL_ChibiOS: fixed build of f3 boards without PWM out 2021-02-24 18:25:02 +11:00
Andrew Tridgell 243cf2199d HAL_ChibiOS: disable shared DMA on IOMCU 
this saves about 600 bytes of ram
 2021-02-24 18:21:08 +11:00
Andrew Tridgell c23f61b79a HAL_ChibiOS: set internal error on panic 2021-02-24 18:18:37 +11:00
Andrew Tridgell eec05c1f48 HAL_ChibiOS: fixed a race and null ptr deref in dshot 
if a dshot is cancelled then the waiter can be nullptr
 2021-02-24 15:39:10 +11:00
Andy Piper b102391163 AP_HAL_ChibiOS: don't send rcout events without rcout thread 2021-02-24 08:55:12 +11:00
Mirko Denecke edc2b0c94e AP_HAL_ChibiOS: fix copy and paste typo 2021-02-23 08:15:50 +09:00
Andrew Tridgell 7af20e9ea3 HAL_ChibiOS: increase H7 serial buffer sizes 
this takes better advantage of the new UART code. Log download over
USB gets to 730 kbyte/s. For comparison, with the 4.0 code on the same
H7 we get about 300 kbyte/s
 2021-02-20 20:49:45 +11:00
Andrew Tridgell 3b88a3273b HAL_ChibiOS: adjust up uart tx stack size 
lowest was showing 80 bytes free, which is too close to the 64 byte
level where we trigger an internal error
 2021-02-20 14:37:11 +11:00
Andrew Tridgell 5e0f175223 HAL_ChibiOS: adjust UART buffer sizes for new UART code 
this gains about 20k of RAM, and has almost no impact on log download
speed at 921600 on a F427. The improved threading means we can afford
to have smaller buffers
 2021-02-20 14:37:11 +11:00
Andy Piper 4e61ba2dc8 AP_HAL_ChibiOS: reduce stack sizes for rcout, uart_rx and storage. 2021-02-20 14:37:11 +11:00
Andy Piper 94de238751 AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu. 2021-02-20 14:37:11 +11:00
Andy Piper f9c5f9be00 AP_HAL_ChibiOS: make dshot DMA unlock event driven in order to allow unlocking from rcout thread 
refactor rcout into separate thread and process all dshot requests there
move uart DMA completion to event model
process dshot locks in strick reverse order when unlocking
convert Shared_DMA to use mutexes
move UART transmit to a thread-per-uart
do blocking UART DMA transactions
do blocking dshot DMA transactions
trim stack sizes
cancel dma transactions on dshot when timeout occurs
support contention stats on blocking locking
move thread supression into chibios_hwdef.py
invalidate DMA bounce buffer correctly
separate UART initialisation into two halves
cleanup UART transaction timeouts
add @SYS/uarts.txt
move half-duplex handling to TX thread
correct thread statistics after use of ExpandingString
set unbuffered TX thread priority owner + 1
correctly unlock serial_led_send()
don't share IMU RX on KakuteF7Mini
observe dshot pulse time more accurately.
set TRBUFF bit for UART DMA transfers
deal with UART DMA timeouts correctly
don't deadlock on reverse ordered DMA locks
change PORT_INT_REQUIRED_STACK to 128
 2021-02-20 14:37:11 +11:00